The Uncompromising Code Formatter
> “Any color you like.”
_Black_ is the uncompromising Python code formatter. By using it, you agree to cede
control over minutiae of hand-formatting. In return, _Black_ gives you speed,
determinism, and freedom from `pycodestyle` nagging about formatting. You will save time
and mental energy for more important matters.
Blackened code looks the same regardless of the project you're reading. Formatting
becomes transparent after a while and you can focus on the content instead.
_Black_ makes code review faster by producing the smallest diffs possible.
Try it out now using the [Black Playground](https://black.now.sh). Watch the
[PyCon 2019 talk](https://youtu.be/esZLCuWs_2Y) to learn more.
---
_Contents:_ **[Installation and usage](#installation-and-usage)** |
**[Code style](#the-black-code-style)** | **[Pragmatism](#pragmatism)** |
**[pyproject.toml](#pyprojecttoml)** | **[Editor integration](#editor-integration)** |
**[blackd](#blackd)** | **[black-primer](#black-primer)** |
**[Version control integration](#version-control-integration)** |
**[Ignoring unmodified files](#ignoring-unmodified-files)** | **[Used by](#used-by)** |
**[Testimonials](#testimonials)** | **[Show your style](#show-your-style)** |
**[Contributing](#contributing-to-black)** | **[Change Log](#change-log)** |
**[Authors](#authors)**
---
## Installation and usage
### Installation
_Black_ can be installed by running `pip install black`. It requires Python 3.6.0+ to
run but you can reformat Python 2 code with it, too.
### Usage
To get started right away with sensible defaults:
```sh
black {source_file_or_directory}
```
### Command line options
_Black_ doesn't provide many options. You can list them by running `black --help`:
```text
Usage: black [OPTIONS] [SRC]...
The uncompromising code formatter.
Options:
-c, --code TEXT Format the code passed in as a string.
-l, --line-length INTEGER How many characters per line to allow.
[default: 88]
-t, --target-version [py27|py33|py34|py35|py36|py37|py38]
Python versions that should be supported by
Black's output. [default: per-file auto-
detection]
--pyi Format all input files like typing stubs
regardless of file extension (useful when
piping source on standard input).
-S, --skip-string-normalization
Don't normalize string quotes or prefixes.
--check Don't write the files back, just return the
status. Return code 0 means nothing would
change. Return code 1 means some files
would be reformatted. Return code 123 means
there was an internal error.
--diff Don't write the files back, just output a
diff for each file on stdout.
--color / --no-color Show colored diff. Only applies when
`--diff` is given.
--fast / --safe If --fast given, skip temporary sanity
checks. [default: --safe]
--include TEXT A regular expression that matches files and
directories that should be included on
recursive searches. An empty value means
all files are included regardless of the
name. Use forward slashes for directories
on all platforms (Windows, too). Exclusions
are calculated first, inclusions later.
[default: \.pyi?$]
--exclude TEXT A regular expression that matches files and
directories that should be excluded on
recursive searches. An empty value means no
paths are excluded. Use forward slashes for
directories on all platforms (Windows, too).
Exclusions are calculated first, inclusions
later. [default: /(\.eggs|\.git|\.hg|\.mypy
_cache|\.nox|\.tox|\.venv|\.svn|_build|buck-
out|build|dist)/]
--force-exclude TEXT Like --exclude, but files and directories
matching this regex will be excluded even
when they are passed explicitly as arguments
-q, --quiet Don't emit non-error messages to stderr.
Errors are still emitted; silence those with
2>/dev/null.
-v, --verbose Also emit messages to stderr about files
that were not changed or were ignored due to
--exclude=.
--version Show the version and exit.
--config FILE Read configuration from PATH.
-h, --help Show this message and exit.
```
_Black_ is a well-behaved Unix-style command-line tool:
- it does nothing if no sources are passed to it;
- it will read from standard input and write to standard output if `-` is used as the
filename;
- it only outputs messages to users on standard error;
- exits with code 0 unless an internal error occurred (or `--check` was used).
### Using _Black_ with other tools
While _Black_ enforces formatting that conforms to PEP 8, other tools may raise warnings
about _Black_'s changes or will overwrite _Black_'s changes. A good example of this is
[isort](https://pypi.org/p/isort). Since _Black_ is barely configurable, these tools
should be configured to neither warn about nor overwrite _Black_'s changes.
Actual details on _Black_ compatible configurations for various tools can be found in
[compatible_configs](https://github.com/psf/black/blob/master/docs/compatible_configs.md).
### Migrating your code style without ruining git blame
A long-standing argument against moving to automated code formatters like _Black_ is
that the migration will clutter up the output of `git blame`. This was a valid argument,
but since Git version 2.23, Git natively supports
[ignoring revisions in blame](https://git-scm.com/docs/git-blame#Documentation/git-blame.txt---ignore-revltrevgt)
with the `--ignore-rev` option. You can also pass a file listing the revisions to ignore
using the `--ignore-revs-file` option. The changes made by the revision will be ignored
when assigning blame. Lines modified by an ignored revision will be blamed on the
previous revision that modified those lines.
So when migrating your project's code style to _Black_, reformat everything and commit
the changes (preferably in one massive commit). Then put the full 40 characters commit
identifier(s) into a file.
```
# Migrate code style to Black
5b4ab991dede475d393e9d69ec388fd6bd949699
```
Afterwards, you can pass that file to `git blame` and see clean and meaningful blame
information.
```console
$ git blame important.py --ignore-revs-file .git-blame-ignore-revs
7a1ae265 (John Smith 2019-04-15 15:55:13 -0400 1) def very_important_function(text, file):
abdfd8b0 (Alice Doe 2019-09-23 11:39:32 -0400 2) text = text.lstrip()
7a1ae265 (John Smith 2019-04-15 15:55:13 -0400 3) with open(file, "r+") as f:
7a1ae265 (John Smith 2019-04-15 15:55:13 -0400 4) f.write(formatted)
```
You can even configure `git` to automatically ignore revisions listed in a file on every
call to `git blame`.
```console
$ git config blame.ignoreRevsFile .git-blame-ignore-revs
```
**The one caveat is that GitHub and GitLab do not yet support ignoring revisions using
their native UI of blame.** So blame information will be cluttered with a reformatting
commit on those platforms. (If you'd like this feature, there's an open issue for
[GitLab](https://gitlab.com/gitlab-org/gitlab/-/issues/31423) and please let GitHub
know!)
### NOTE: This is a beta product
_Black_ is already [successfully used](#used-by) by many projects, small and big. It
also sports a decent test suite. However, it is still very new. Things will probably be
wonky for a while. This is made explicit by the "Beta" trove classifier, as well as by
the "b" in the version number. What this means for you is that **until the formatter
becomes stable, you should expect some formatting to change in the future**. That being
said, no drastic stylistic changes are planned, mostly responses to bug reports.
Also, as a temporary safety measure, _Black_ will check that the reformatted code still
produces a valid AST that is equivalent to the original. This slows it down. If you're
feeling confident, use `--fast`.
## The _Black_ code style
_Black_ reformats entire files in place. It is not configurable. It doesn't take
previous formatting into account. It doesn't reformat blocks that start with
`# fmt: off` and end with `# fmt: on`. `# fmt: on/off` have to be on the same level of
indentation. It also recognizes [YAPF](https://github.com/google/yapf)'s block comments
to the same effect, as a courtesy for straddling code.
### How _Black_ wraps lines
_Black_ ignores previous formatting and applies uniform horizontal and vertical
whitespace to your code. The rules for horizontal whitespace can be summarized as: do
whatever makes `pycodestyle` happy. The coding style used by _Black_ can be viewed as a
strict subset of PEP 8.
As for vertical whitespace, _Black_ tries to render one full expression or simple
statement per line. If this fits the allotted line length, great.
```py3
# in:
j = [1,
2,
3
]
# out:
j = [1, 2, 3]
```
If not, _Black_ will look at the contents of the first outer matching brackets and put
that in a separate indented line.
```py3
# in:
ImportantClass.important_method(exc, limit, lookup_lines, capture_locals, extra_argument)
# out:
ImportantClass.important_method(
exc, limit, lookup_lines, capture_locals, extra_argument
)
```
If that still doesn't fit the bill, it will decompose the internal expression further
using the same rule, indenting matching brackets every time. If the contents of the
matching brackets pair are comma-separated (like an argument list, or a dict literal,
and so on) then _Black_ will first try to keep them on the same line with the matching
brackets. If that doesn't work, it will put all of them in separate lines.
```py3
# in:
def very_important_function(template: str, *variables, file: os.PathLike, engine: str, header: bool = True, debug: bool = False):
"""Applies `variables` to the `template` and writes to `file`."""
with open(file, 'w') as f:
...
# out:
def very_important_function(
template: str,
*variables,
file: os.PathLike,
engine: str,
header: bool = True,
debug: bool = False,
):
"""Applies `variables` to the `template` and writes to `file`."""
with open(file, "w") as f:
...
```
_Black_ prefers parentheses over backslashes, and will remove backslashes if found.
```py3
# in:
if some_short_rule1 \
and some_short_rule2:
...
# out:
if some_short_rule1 and some_short_rule2:
...
# in:
if some_long_rule1 \
and some_long_rule2:
...
# out:
if (
some_long_rule1
and some_long_rule2
):
...
```
Backslashes and multiline strings are one of the two places in the Python grammar that
break significant indentation. You never need backslashes, they are used to force the
grammar to accept breaks that would otherwise be parse errors. That makes them confusing
to look at and brittle to modify. This is why _Black_ always gets rid of them.
If you're reaching for backslashes, that's a clear signal that you can do better if you
slightly refactor your code. I hope some of the examples above show you that there are
many ways in which you can do it.
However there is one exception: `with` statements using multiple context managers.
Python's grammar does not allow organizing parentheses around the series of context
managers.
We don't want formatting like:
```py3
with make_context_manager1() as cm1, make_context_manager2() as cm2, make_context_manager3() as cm3, make_context_manager4() as cm4:
... # nothing to split on - line too long
```
So _Black_ will now format it like this:
```py3
with \
make_context_manager(1) as cm1, \
make_context_manager(2) as cm2, \
make_context_manager(3) as cm3, \
make_context_manager(4) as cm4 \
:
... # backslashes and an ugly stranded colon
```
You might have noticed that closing brackets are always dedented and that a trailing
comma is always added. Such formatting produces smaller diffs; when you add or remove an
element, it's always just one line. Also, having the closing bracket dedented provides a
clear delimiter between two distinct sections of the code that otherwise share the same
indentation level (like the arguments list and the docstring in the example above).
If a data structure literal (tuple, list, set, dict) or a line of "from" imports cannot
fit in the allotted length, it's always split into one element per line. This minimizes
diffs as well as enables readers of code to find which commit introduced a particular
entry. This also makes _Black_ compatible with [isort](https://pypi.org/p/isort/) with
the following configuration.
A compatible `.isort.cfg`
```
[settings]
multi_line_output=3
include_trailing_comma=True
force_grid_wrap=0
use_parentheses=True
line_length=88
```
The equivalent command line is:
```
$ isort --multi-line=3 --trailing-comma --force-grid-wrap=0 --use-parentheses --line-width=88 [ file.py ]
```
### Line length
You probably noticed the peculiar default line length. _Black_ defaults to 88 characters
per line, which happens to be 10% over 80. This number was found to produce
significantly shorter files than sticking with 80 (the most popular), or even 79 (used
by the standard library). In general,
[90-ish seems like the wise choice](https://youtu.be/wf-BqAjZb8M?t=260).
If you're paid by the line of code you write, you can pass `--line-length` with a lower
number. _Black_ will try to respect that. However, sometimes it won't be able to without
breaking other rules. In those rare cases, auto-formatted code will exceed your allotted
limit.
You can also increase it, but remember that people with sight disabilities find it
harder to work with line lengths exceeding 100 characters. It also adversely affects
side-by-side diff review on typical screen resolutions. Long lines also make it harder
to present code neatly in documentation or talk slides.
If you're using Flake8, you can bump `max-line-length` to 88 and forget about it.
Alternatively, use [Bugbear](https://github.com/PyCQA/flake8-bugbear)'s B950 warning
instead of E501 and keep the max line length at 80 which you are probably already using.
You'd do it like this:
```ini
[flake8]
max-line-length = 80
...
select = C,E,F,W,B,B950
ignore = E203, E501, W503
```
You'll find _Black_'s own .flake8 config file is configured like this. Explanation of
why W503 and E203 are disabled can be found further in this documentation. And if you're
curious about the reasoning behind B950,
[Bugbear's documentation](https://github.com/PyCQA/flake8-bugbear#opinionated-warnings)
explains it. The tl;dr is "it's like highway speed limits, we won't bother you if you
overdo it by a few km/h".
**If you're looking for a minimal, black-compatible flake8 configuration:**
```ini
[flake8]
max-line-length = 88
extend-ignore = E203
```
### Empty lines
_Black_ avoids spurious vertical whitespace. This is in the spirit of PEP 8 which says
that in-function vertical whitespace should only be used sparingly.
_Black_ will allow single empty lines inside functions, and single and double empty
lines on module level left by the original editors, except when they're within
parenthesized expressions. Since such expressions are always reformatted to fit minimal
space, this whitespace is lost.
It will also insert proper spacing before and after function definitions. It's one line
before and after inner functions and two lines before and after module-level functions
and classes. _Black_ will not put empty lines between function/class definitions and
standalone comments that immediately precede the given function/class.
_Black_ will enforce single empty lines between a class-level docstring and the first
following field or method. This conforms to
[PEP 257](https://www.python.org/dev/peps/pep-0257/#multi-line-docstrings).
_Black_ won't insert empty lines after function docstrings unless that empty line is
required due to an inner function starting immediately after.
### Trailing commas
_Black_ will add trailing commas to expressions that are split by comma where each
element is on its own line. This includes function signatures.
Unnecessary trailing commas are removed if an expression fits in one line. This makes it
1% more likely that your line won't exceed the allotted line length limit. Moreover, in
this scenario, if you added another argument to your call, you'd probably fit it in the
same line anyway. That doesn't make diffs any larger.
One exception to removing trailing commas is tuple expressions with just one element. In
this case _Black_ won't touch the single trailing comma as this would unexpectedly
change the underlying data type. Note that this is also the case when commas are used
while indexing. This is a tuple in disguise: `numpy_array[3, ]`.
One exception to adding trailing commas is function signatures containing `*`, `*args`,
or `**kwargs`. In this case a trailing comma is only safe to use on Python 3.6. _Black_
will detect if your file is already 3.6+ only and use trailing commas in this situation.
If you wonder how it knows, it looks for f-strings and existing use of trailing commas
in function signatures that have stars in them. In other words, if you'd like a trailing
comma in this situation and _Black_ didn't recognize it was safe to do so, put it there
manually and _Black_ will keep it.
### Strings
_Black_ prefers double quotes (`"` and `"""`) over single quotes (`'` and `'''`). It
will replace the latter with the former as long as it does not result in more backslash
escapes than before.
_Black_ also standardizes string prefixes, making them always lowercase. On top of that,
if your code is already Python 3.6+ only or it's using the `unicode_literals` future
import, _Black_ will remove `u` from the string prefix as it is meaningless in those
scenarios.
The main reason to standardize on a single form of quotes is aesthetics. Having one kind
of quotes everywhere reduces reader distraction. It will also enable a future version of
_Black_ to merge consecutive string literals that ended up on the same line (see
[#26](https://github.com/psf/black/issues/26) for details).
Why settle on double quotes? They anticipate apostrophes in English text. They match the
docstring standard described in
[PEP 257](https://www.python.org/dev/peps/pep-0257/#what-is-a-docstring). An empty
string in double quotes (`""`) is impossible to confuse with a one double-quote
regardless of fonts and syntax highlighting used. On top of this, double quotes for
strings are consistent with C which Python interacts a lot with.
On certain keyboard layouts like US English, typing single quotes is a bit easier than
double quotes. The latter requires use of the Shift key. My recommendation here is to
keep using whatever is faster to type and let _Black_ handle the transformation.
If you are adopting _Black_ in a large project with pre-existing string conventions
(like the popular
["single quotes for data, double quotes for human-readable strings"](https://stackoverflow.com/a/56190)),
you can pass `--skip-string-normalization` on the command line. This is meant as an
adoption helper, avoid using this for new projects.
### Numeric literals
_Black_ standardizes most numeric literals to use lowercase letters for the syntactic
parts and uppercase letters for the digits themselves: `0xAB` instead of `0XAB` and
`1e10` instead of `1E10`. Python 2 long literals are styled as `2L` instead of `2l` to
avoid confusion between `l` and `1`.
### Line breaks & binary operators
_Black_ will break a line before a binary operator when splitting a block of code over
multiple lines. This is so that _Black_ is compliant with the recent changes in the
[PEP 8](https://www.python.org/dev/peps/pep-0008/#should-a-line-break-before-or-after-a-binary-operator)
style guide, which emphasizes that this approach improves readability.
This behaviour may raise `W503 line break before binary operator` warnings in style
guide enforcement tools like Flake8. Since `W503` is not PEP 8 compliant, you should
tell Flake8 to ignore these warnings.
### Slices
PEP 8
[recommends](https://www.python.org/dev/peps/pep-0008/#whitespace-in-expressions-and-statements)
to treat `:` in slices as a binary operator with the lowest priority, and to leave an
equal amount of space on either side, except if a parameter is omitted (e.g.
`ham[1 + 1 :]`). It recommends no spaces around `:` operators for "simple expressions"
(`ham[lower:upper]`), and extra space for "complex expressions"
(`ham[lower : upper + offset]`). _Black_ treats anything more than variable names as
"complex" (`ham[lower : upper + 1]`). It also states that for extended slices, both `:`
operators have to have the same amount of spacing, except if a parameter is omitted
(`ham[1 + 1 ::]`). _Black_ enforces these rules consistently.
This behaviour may raise `E203 whitespace before ':'` warnings in style guide
enforcement tools like Flake8. Since `E203` is not PEP 8 compliant, you should tell
Flake8 to ignore these warnings.
### Parentheses
Some parentheses are optional in the Python grammar. Any expression can be wrapped in a
pair of parentheses to form an atom. There are a few interesting cases:
- `if (...):`
- `while (...):`
- `for (...) in (...):`
- `assert (...), (...)`
- `from X import (...)`
- assignments like:
- `target = (...)`
- `target: type = (...)`
- `some, *un, packing = (...)`
- `augmented += (...)`
In those cases, parentheses are removed when the entire statement fits in one line, or
if the inner expression doesn't have any delimiters to further split on. If there is
only a single delimiter and the expression starts or ends with a bracket, the
parenthesis can also be successfully omitted since the existing bracket pair will
organize the expression neatly anyway. Otherwise, the parentheses are added.
Please note that _Black_ does not add or remove any additional nested parentheses that
you might want to have for clarity or further code organization. For example those
parentheses are not going to be removed:
```py3
return not (this or that)
decision = (maybe.this() and values > 0) or (maybe.that() and values < 0)
```
### Call chains
Some popular APIs, like ORMs, use call chaining. This API style is known as a
[fluent interface](https://en.wikipedia.org/wiki/Fluent_interface). _Black_ formats
those by treating dots that follow a call or an indexing operation like a very low
priority delimiter. It's easier to show the behavior than to explain it. Look at the
example:
```py3
def example(session):
result = (
session.query(models.Customer.id)
.filter(
models.Customer.account_id == account_id,
models.Customer.email == email_address,
)
.order_by(models.Customer.id.asc())
.all()
)
```
### Typing stub files
PEP 484 describes the syntax for type hints in Python. One of the use cases for typing
is providing type annotations for modules which cannot contain them directly (they might
be written in C, or they might be third-party, or their implementation may be overly
dynamic, and so on).
To solve this,
[stub files with the `.pyi` file extension](https://www.python.org/dev/peps/pep-0484/#stub-files)
can be used to describe typing information for an external module. Those stub files omit
the implementation of classes and functions they describe, instead they only contain the
structure of the file (listing globals, functions, and classes with their members). The
recommended code style for those files is more terse than PEP 8:
- prefer `...` on the same line as the class/function signature;
- avoid vertical whitespace between consecutive module-level functions, names, or
methods and fields within a single class;
- use a single blank line between top-level class definitions, or none if the classes
are very small.
_Black_ enforces the above rules. There are additional guidelines for formatting `.pyi`
file that are not enforced yet but might be in a future version of the formatter:
- all function bodies should be empty (contain `...` instead of the body);
- do not use docstrings;
- prefer `...` over `pass`;
- for arguments with a default, use `...` instead of the actual default;
- avoid using string literals in type annotations, stub files support forward references
natively (like Python 3.7 code with `from __future__ import annotations`);
- use variable annotations instead of type comments, even for stubs that target older
versions of Python;
- for arguments that default to `None`, use `Optional[]` explicitly;
- use `float` instead of `Union[int, float]`.
## Pragmatism
Early versions of _Black_ used to be absolutist in some respects. They took after its
initial author. This was fine at the time as it made the implementation simpler and
there were not many users anyway. Not many edge cases were reported. As a mature tool,
_Black_ does make some exceptions to rules it otherwise holds. This section documents
what those exceptions are and why this is the case.
### The magic trailing comma
_Black_ in general does not take existing formatting into account.
However, there are cases where you put a short collection or function call in your code
but you anticipate it will grow in the future.
For example:
```py3
TRANSLATIONS = {
"en_us": "English (US)",
"pl_pl": "polski",
}
```
Early versions of _Black_ used to ruthlessly collapse those into one line (it fits!).
Now, you can communicate that you don't want that by putting a trailing comma in the
collection yourself. When you do, _Black_ will know to always explode your collection
into one item per line.
How do you make it stop? Just delete that trailing comma and _Black_ will collapse your
collection into one line if it fits.
### r"strings" and R"strings"
_Black_ normalizes string quotes as well as string prefixes, making them lowercase. One
exception to this rule is r-strings. It turns out that the very popular
[MagicPython](https://github.com/MagicStack/MagicPython/) syntax highlighter, used by
default by (among others) GitHub and Visual Studio Code, differentiates between
r-strings and R-strings. The former are syntax highlighted as regular expressions while
the latter are treated as true raw strings with no special semantics.
## pyproject.toml
_Black_ is able to read project-specific default values for its command line options
from a `pyproject.toml` file. This is especially useful for specifying custom
`--include` and `--exclude` patterns for your project.
**Pro-tip**: If you're asking yourself "Do I need to configure anything?" the answer is
"No". _Black_ is all about sensible defaults.
### What on Earth is a `pyproject.toml` file?
[PEP 518](https://www.python.org/dev/peps/pep-0518/) defines `pyproject.toml` as a
configuration file to store build system requirements for Python projects. With the help
of tools like [Poetry](https://poetry.eustace.io/) or
[Flit](https://flit.readthedocs.io/en/latest/) it can fully replace the need for
`setup.py` and `setup.cfg` files.
### Where _Black_ looks for the file
By default _Black_ looks for `pyproject.toml` starting from the common base directory of
all files and directories passed on the command line. If it's not there, it looks in
parent directories. It stops looking when it finds the file, or a `.git` directory, or a
`.hg` directory, or the root of the file system, whichever comes first.
If you're formatting standard input, _Black_ will look for configuration starting from
the current working directory.
You can also explicitly specify the path to a particular file that you want with
`--config`. In this situation _Black_ will not look for any other file.
If you're running with `--verbose`, you will see a blue message if a file was found and
used.
Please note `blackd` will not use `pyproject.toml` configuration.
### Configuration format
As the file extension suggests, `pyproject.toml` is a
[TOML](https://github.com/toml-lang/toml) file. It contains separate sections for
different tools. _Black_ is using the `[tool.black]` section. The option keys are the
same as long names of options on the command line.
Note that you have to use single-quoted strings in TOML for regular expressions. It's
the equivalent of r-strings in Python. Multiline strings are treated as verbose regular
expressions by Black. Use `[ ]` to denote a significant space character.
Example `pyproject.toml`
```toml
[tool.black]
line-length = 88
target-version = ['py37']
include = '\.pyi?$'
exclude = '''
(
/(
\.eggs # exclude a few common directories in the
| \.git # root of the project
| \.hg
| \.mypy_cache
| \.tox
| \.venv
| _build
| buck-out
| build
| dist
)/
| foo.py # also separately exclude a file named foo.py in
# the root of the project
)
'''
```
### Lookup hierarchy
Command-line options have defaults that you can see in `--help`. A `pyproject.toml` can
override those defaults. Finally, options provided by the user on the command line
override both.
_Black_ will only ever use one `pyproject.toml` file during an entire run. It doesn't
look for multiple files, and doesn't compose configuration from different levels of the
file hierarchy.
## Editor integration
### Emacs
Options include the following:
- [purcell/reformatter.el](https://github.com/purcell/reformatter.el)
- [proofit404/blacken](https://github.com/proofit404/blacken)
- [Elpy](https://github.com/jorgenschaefer/elpy).
### PyCharm/IntelliJ IDEA
1. Install `black`.
```console
$ pip install black
```
2. Locate your `black` installation folder.
On macOS / Linux / BSD:
```console
$ which black
/usr/local/bin/black # possible location
```
On Windows:
```console
$ where black
%LocalAppData%\Programs\Python\Python36-32\Scripts\black.exe # possible location
```
Note that if you are using a virtual environment detected by PyCharm, this is an
unneeded step. In this case the path to `black` is `$PyInterpreterDirectory$/black`.
3. Open External tools in PyCharm/IntelliJ IDEA
On macOS:
`PyCharm -> Preferences -> Tools -> External Tools`
On Windows / Linux / BSD:
`File -> Settings -> Tools -> External Tools`
4. Click the + icon to add a new external tool with the following values:
- Name: Black
- Description: Black is the uncompromising Python code formatter.
- Program:
- Arguments: `"$FilePath$"`
5. Format the currently opened file by selecting `Tools -> External Tools -> black`.
- Alternatively, you can set a keyboard shortcut by navigating to
`Preferences or Settings -> Keymap -> External Tools -> External Tools - Black`.
6. Optionally, run _Black_ on every file save:
1. Make sure you have the
[File Watchers](https://plugins.jetbrains.com/plugin/7177-file-watchers) plugin
installed.
2. Go to `Preferences or Settings -> Tools -> File Watchers` and click `+` to add a
new watcher:
- Name: Black
- File type: Python
- Scope: Project Files
- Program:
- Arguments: `$FilePath$`
- Output paths to refresh: `$FilePath$`
- Working directory: `$ProjectFileDir$`
- Uncheck "Auto-save edited files to trigger the watcher" in Advanced Options
### Wing IDE
Wing supports black via the OS Commands tool, as explained in the Wing documentation on
[pep8 formatting](https://wingware.com/doc/edit/pep8). The detailed procedure is:
1. Install `black`.
```console
$ pip install black
```
2. Make sure it runs from the command line, e.g.
```console
$ black --help
```
3. In Wing IDE, activate the **OS Commands** panel and define the command **black** to
execute black on the currently selected file:
- Use the Tools -> OS Commands menu selection
- click on **+** in **OS Commands** -> New: Command line..
- Title: black
- Command Line: black %s
- I/O Encoding: Use Default
- Key Binding: F1
- [x] Raise OS Commands when executed
- [x] Auto-save files before execution
- [x] Line mode
4. Select a file in the editor and press **F1** , or whatever key binding you selected
in step 3, to reformat the file.
### Vim
Commands and shortcuts:
- `:Black` to format the entire file (ranges not supported);
- `:BlackUpgrade` to upgrade _Black_ inside the virtualenv;
- `:BlackVersion` to get the current version of _Black_ inside the virtualenv.
Configuration:
- `g:black_fast` (defaults to `0`)
- `g:black_linelength` (defaults to `88`)
- `g:black_skip_string_normalization` (defaults to `0`)
- `g:black_virtualenv` (defaults to `~/.vim/black` or `~/.local/share/nvim/black`)
To install with [vim-plug](https://github.com/junegunn/vim-plug):
```
Plug 'psf/black', { 'branch': 'stable' }
```
or with [Vundle](https://github.com/VundleVim/Vundle.vim):
```
Plugin 'psf/black'
```
and execute the following in a terminal:
```console
$ cd ~/.vim/bundle/black
$ git checkout origin/stable -b stable
```
or you can copy the plugin from
[plugin/black.vim](https://github.com/psf/black/blob/stable/plugin/black.vim).
```
mkdir -p ~/.vim/pack/python/start/black/plugin
curl https://raw.githubusercontent.com/psf/black/master/plugin/black.vim -o ~/.vim/pack/python/start/black/plugin/black.vim
```
Let me know if this requires any changes to work with Vim 8's builtin `packadd`, or
Pathogen, and so on.
This plugin **requires Vim 7.0+ built with Python 3.6+ support**. It needs Python 3.6 to
be able to run _Black_ inside the Vim process which is much faster than calling an
external command.
On first run, the plugin creates its own virtualenv using the right Python version and
automatically installs _Black_. You can upgrade it later by calling `:BlackUpgrade` and
restarting Vim.
If you need to do anything special to make your virtualenv work and install _Black_ (for
example you want to run a version from master), create a virtualenv manually and point
`g:black_virtualenv` to it. The plugin will use it.
To run _Black_ on save, add the following line to `.vimrc` or `init.vim`:
```
autocmd BufWritePre *.py execute ':Black'
```
To run _Black_ on a key press (e.g. F9 below), add this:
```
nnoremap :Black
```
**How to get Vim with Python 3.6?** On Ubuntu 17.10 Vim comes with Python 3.6 by
default. On macOS with Homebrew run: `brew install vim`. When building Vim from source,
use: `./configure --enable-python3interp=yes`. There's many guides online how to do
this.
**I get an import error when using _Black_ from a virtual environment**: If you get an
error message like this:
```text
Traceback (most recent call last):
File "", line 63, in
File "/home/gui/.vim/black/lib/python3.7/site-packages/black.py", line 45, in
from typed_ast import ast3, ast27
File "/home/gui/.vim/black/lib/python3.7/site-packages/typed_ast/ast3.py", line 40, in
from typed_ast import _ast3
ImportError: /home/gui/.vim/black/lib/python3.7/site-packages/typed_ast/_ast3.cpython-37m-x86_64-linux-gnu.so: undefined symbool: PyExc_KeyboardInterrupt
```
Then you need to install `typed_ast` and `regex` directly from the source code. The
error happens because `pip` will download [Python wheels](https://pythonwheels.com/) if
they are available. Python wheels are a new standard of distributing Python packages and
packages that have Cython and extensions written in C are already compiled, so the
installation is much more faster. The problem here is that somehow the Python
environment inside Vim does not match with those already compiled C extensions and these
kind of errors are the result. Luckily there is an easy fix: installing the packages
from the source code.
The two packages that cause the problem are:
- [regex](https://pypi.org/project/regex/)
- [typed-ast](https://pypi.org/project/typed-ast/)
Now remove those two packages:
```console
$ pip uninstall regex typed-ast -y
```
And now you can install them with:
```console
$ pip install --no-binary :all: regex typed-ast
```
The C extensions will be compiled and now Vim's Python environment will match. Note that
you need to have the GCC compiler and the Python development files installed (on
Ubuntu/Debian do `sudo apt-get install build-essential python3-dev`).
If you later want to update _Black_, you should do it like this:
```console
$ pip install -U black --no-binary regex,typed-ast
```
### Visual Studio Code
Use the
[Python extension](https://marketplace.visualstudio.com/items?itemName=ms-python.python)
([instructions](https://code.visualstudio.com/docs/python/editing#_formatting)).
### SublimeText 3
Use [sublack plugin](https://github.com/jgirardet/sublack).
### Jupyter Notebook Magic
Use [blackcellmagic](https://github.com/csurfer/blackcellmagic).
### Python Language Server
If your editor supports the [Language Server Protocol](https://langserver.org/) (Atom,
Sublime Text, Visual Studio Code and many more), you can use the
[Python Language Server](https://github.com/palantir/python-language-server) with the
[pyls-black](https://github.com/rupert/pyls-black) plugin.
### Atom/Nuclide
Use [python-black](https://atom.io/packages/python-black).
### Kakoune
Add the following hook to your kakrc, then run _Black_ with `:format`.
```
hook global WinSetOption filetype=python %{
set-option window formatcmd 'black -q -'
}
```
### Thonny
Use [Thonny-black-code-format](https://github.com/Franccisco/thonny-black-code-format).
### Other editors
Other editors will require external contributions.
Patches welcome! ✨ 🍰 ✨
Any tool that can pipe code through _Black_ using its stdio mode (just
[use `-` as the file name](https://www.tldp.org/LDP/abs/html/special-chars.html#DASHREF2)).
The formatted code will be returned on stdout (unless `--check` was passed). _Black_
will still emit messages on stderr but that shouldn't affect your use case.
This can be used for example with PyCharm's or IntelliJ's
[File Watchers](https://www.jetbrains.com/help/pycharm/file-watchers.html).
## blackd
`blackd` is a small HTTP server that exposes _Black_'s functionality over a simple
protocol. The main benefit of using it is to avoid paying the cost of starting up a new
_Black_ process every time you want to blacken a file.
### Usage
`blackd` is not packaged alongside _Black_ by default because it has additional
dependencies. You will need to do `pip install black[d]` to install it.
You can start the server on the default port, binding only to the local interface by
running `blackd`. You will see a single line mentioning the server's version, and the
host and port it's listening on. `blackd` will then print an access log similar to most
web servers on standard output, merged with any exception traces caused by invalid
formatting requests.
`blackd` provides even less options than _Black_. You can see them by running
`blackd --help`:
```text
Usage: blackd [OPTIONS]
Options:
--bind-host TEXT Address to bind the server to.
--bind-port INTEGER Port to listen on
--version Show the version and exit.
-h, --help Show this message and exit.
```
There is no official blackd client tool (yet!). You can test that blackd is working
using `curl`:
```sh
blackd --bind-port 9090 & # or let blackd choose a port
curl -s -XPOST "localhost:9090" -d "print('valid')"
```
### Protocol
`blackd` only accepts `POST` requests at the `/` path. The body of the request should
contain the python source code to be formatted, encoded according to the `charset` field
in the `Content-Type` request header. If no `charset` is specified, `blackd` assumes
`UTF-8`.
There are a few HTTP headers that control how the source is formatted. These correspond
to command line flags for _Black_. There is one exception to this: `X-Protocol-Version`
which if present, should have the value `1`, otherwise the request is rejected with
`HTTP 501` (Not Implemented).
The headers controlling how code is formatted are:
- `X-Line-Length`: corresponds to the `--line-length` command line flag.
- `X-Skip-String-Normalization`: corresponds to the `--skip-string-normalization`
command line flag. If present and its value is not the empty string, no string
normalization will be performed.
- `X-Fast-Or-Safe`: if set to `fast`, `blackd` will act as _Black_ does when passed the
`--fast` command line flag.
- `X-Python-Variant`: if set to `pyi`, `blackd` will act as _Black_ does when passed the
`--pyi` command line flag. Otherwise, its value must correspond to a Python version or
a set of comma-separated Python versions, optionally prefixed with `py`. For example,
to request code that is compatible with Python 3.5 and 3.6, set the header to
`py3.5,py3.6`.
- `X-Diff`: corresponds to the `--diff` command line flag. If present, a diff of the
formats will be output.
If any of these headers are set to invalid values, `blackd` returns a `HTTP 400` error
response, mentioning the name of the problematic header in the message body.
Apart from the above, `blackd` can produce the following response codes:
- `HTTP 204`: If the input is already well-formatted. The response body is empty.
- `HTTP 200`: If formatting was needed on the input. The response body contains the
blackened Python code, and the `Content-Type` header is set accordingly.
- `HTTP 400`: If the input contains a syntax error. Details of the error are returned in
the response body.
- `HTTP 500`: If there was any kind of error while trying to format the input. The
response body contains a textual representation of the error.
The response headers include a `X-Black-Version` header containing the version of
_Black_.
## black-primer
`black-primer` is a tool built for CI (and huumans) to have _Black_ `--check` a number
of (configured in `primer.json`) Git accessible projects in parallel. _(A PR will be
accepted to add Mercurial support.)_
### Run flow
- Ensure we have a `black` + `git` in PATH
- Load projects from `primer.json`
- Run projects in parallel with `--worker` workers (defaults to CPU count / 2)
- Checkout projects
- Run black and record result
- Clean up repository checkout _(can optionally be disabled via `--keep`)_
- Display results summary to screen
- Default to cleaning up `--work-dir` (which defaults to tempfile schemantics)
- Return
- 0 for successful run
- < 0 for environment / internal error
- > 0 for each project with an error
### Speed up Runs 🏎
If you're running locally yourself to test black on lots of code try:
- Using `-k` / `--keep` + `-w` / `--work-dir` so you don't have to re-checkout the repo
each run
### CLI Arguments
```text
Usage: black-primer [OPTIONS]
primer - prime projects for blackening... 🏴
Options:
-c, --config PATH JSON config file path [default: /Users/cooper/repos/
black/src/black_primer/primer.json]
--debug Turn on debug logging [default: False]
-k, --keep Keep workdir + repos post run [default: False]
-L, --long-checkouts Pull big projects to test [default: False]
-R, --rebase Rebase project if already checked out [default:
False]
-w, --workdir PATH Directory Path for repo checkouts [default: /var/fol
ders/tc/hbwxh76j1hn6gqjd2n2sjn4j9k1glp/T/primer.20200
517125229]
-W, --workers INTEGER Number of parallel worker coroutines [default: 69]
-h, --help Show this message and exit.
```
### primer config file
The config is JSON format. Its main element is the `"projects"` dictionary. Below
explains each parameter:
```json
{
"projects": {
"00_Example": {
"cli_arguments": "List of extra CLI arguments to pass Black for this project",
"expect_formatting_changes": "Boolean to indicate that the version of Black is expected to cause changes",
"git_clone_url": "URL you would pass `git clone` to check out this repo",
"long_checkout": "Boolean to have repo skipped by defauult unless `--long-checkouts` is specified",
"py_versions": "List of major Python versions to run this project with - all will do as you'd expect - run on ALL versions"
},
"aioexabgp": {
"cli_arguments": [],
"expect_formatting_changes": true,
"git_clone_url": "https://github.com/cooperlees/aioexabgp.git",
"long_checkout": false,
"py_versions": ["all", "3.8"] // "all" ignores all other versions
}
}
}
```
### Example run
```console
cooper-mbp:black cooper$ ~/venvs/b/bin/black-primer
[2020-05-17 13:06:40,830] INFO: 4 projects to run Black over (lib.py:270)
[2020-05-17 13:06:44,215] INFO: Analyzing results (lib.py:285)
-- primer results 📊 --
3 / 4 succeeded (75.0%) ✅
1 / 4 FAILED (25.0%) 💩
- 0 projects disabled by config
- 0 projects skipped due to Python version
- 0 skipped due to long checkout
Failed projects:
## flake8-bugbear:
- Returned 1
- stdout:
--- tests/b303_b304.py 2020-05-17 20:04:09.991227 +0000
+++ tests/b303_b304.py 2020-05-17 20:06:42.753851 +0000
@@ -26,11 +26,11 @@
maxint = 5 # this is okay
# the following shouldn't crash
(a, b, c) = list(range(3))
# it's different than this
a, b, c = list(range(3))
- a, b, c, = list(range(3))
+ a, b, c = list(range(3))
# and different than this
(a, b), c = list(range(3))
a, *b, c = [1, 2, 3, 4, 5]
b[1:3] = [0, 0]
would reformat tests/b303_b304.py
Oh no! 💥 💔 💥
1 file would be reformatted, 22 files would be left unchanged.
```
## Version control integration
Use [pre-commit](https://pre-commit.com/). Once you
[have it installed](https://pre-commit.com/#install), add this to the
`.pre-commit-config.yaml` in your repository:
```yaml
repos:
- repo: https://github.com/psf/black
rev: stable
hooks:
- id: black
language_version: python3.6
```
Then run `pre-commit install` and you're ready to go.
Avoid using `args` in the hook. Instead, store necessary configuration in
`pyproject.toml` so that editors and command-line usage of Black all behave consistently
for your project. See _Black_'s own
[pyproject.toml](https://github.com/psf/black/blob/master/pyproject.toml) for an
example.
If you're already using Python 3.7, switch the `language_version` accordingly. Finally,
`stable` is a branch that tracks the latest release on PyPI. If you'd rather run on
master, this is also an option.
## Ignoring unmodified files
_Black_ remembers files it has already formatted, unless the `--diff` flag is used or
code is passed via standard input. This information is stored per-user. The exact
location of the file depends on the _Black_ version and the system on which _Black_ is
run. The file is non-portable. The standard location on common operating systems is:
- Windows:
`C:\\Users\\AppData\Local\black\black\Cache\\cache...pickle`
- macOS:
`/Users//Library/Caches/black//cache...pickle`
- Linux:
`/home//.cache/black//cache...pickle`
`file-mode` is an int flag that determines whether the file was formatted as 3.6+ only,
as .pyi, and whether string normalization was omitted.
To override the location of these files on macOS or Linux, set the environment variable
`XDG_CACHE_HOME` to your preferred location. For example, if you want to put the cache
in the directory you're running _Black_ from, set `XDG_CACHE_HOME=.cache`. _Black_ will
then write the above files to `.cache/black//`.
## Used by
The following notable open-source projects trust _Black_ with enforcing a consistent
code style: pytest, tox, Pyramid, Django Channels, Hypothesis, attrs, SQLAlchemy,
Poetry, PyPA applications (Warehouse, Bandersnatch, Pipenv, virtualenv), pandas, Pillow,
every Datadog Agent Integration, Home Assistant.
The following organizations use _Black_: Facebook, Dropbox.
Are we missing anyone? Let us know.
## Testimonials
**Dusty Phillips**,
[writer](https://smile.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=dusty+phillips):
> _Black_ is opinionated so you don't have to be.
**Hynek Schlawack**, [creator of `attrs`](https://www.attrs.org/), core developer of
Twisted and CPython:
> An auto-formatter that doesn't suck is all I want for Xmas!
**Carl Meyer**, [Django](https://www.djangoproject.com/) core developer:
> At least the name is good.
**Kenneth Reitz**, creator of [`requests`](http://python-requests.org/) and
[`pipenv`](https://docs.pipenv.org/):
> This vastly improves the formatting of our code. Thanks a ton!
## Show your style
Use the badge in your project's README.md:
```markdown
[](https://github.com/psf/black)
```
Using the badge in README.rst:
```
.. image:: https://img.shields.io/badge/code%20style-black-000000.svg
:target: https://github.com/psf/black
```
Looks like this:
[](https://github.com/psf/black)
## License
MIT
## Contributing to _Black_
In terms of inspiration, _Black_ is about as configurable as _gofmt_. This is
deliberate.
Bug reports and fixes are always welcome! However, before you suggest a new feature or
configuration knob, ask yourself why you want it. If it enables better integration with
some workflow, fixes an inconsistency, speeds things up, and so on - go for it! On the
other hand, if your answer is "because I don't like a particular formatting" then you're
not ready to embrace _Black_ yet. Such changes are unlikely to get accepted. You can
still try but prepare to be disappointed.
More details can be found in
[CONTRIBUTING](https://github.com/psf/black/blob/master/CONTRIBUTING.md).
## Change Log
The log's become rather long. It moved to its own file.
See [CHANGES](https://github.com/psf/black/blob/master/CHANGES.md).
## Authors
Glued together by [Łukasz Langa](mailto:lukasz@langa.pl).
Maintained with [Carol Willing](mailto:carolcode@willingconsulting.com),
[Carl Meyer](mailto:carl@oddbird.net),
[Jelle Zijlstra](mailto:jelle.zijlstra@gmail.com),
[Mika Naylor](mailto:mail@autophagy.io),
[Zsolt Dollenstein](mailto:zsol.zsol@gmail.com), and
[Cooper Lees](mailto:me@cooperlees.com).
Multiple contributions by:
- [Abdur-Rahmaan Janhangeer](mailto:arj.python@gmail.com)
- [Adam Johnson](mailto:me@adamj.eu)
- [Alexander Huynh](mailto:github@grande.coffee)
- [Andrew Thorp](mailto:andrew.thorp.dev@gmail.com)
- [Andrey](mailto:dyuuus@yandex.ru)
- [Andy Freeland](mailto:andy@andyfreeland.net)
- [Anthony Sottile](mailto:asottile@umich.edu)
- [Arjaan Buijk](mailto:arjaan.buijk@gmail.com)
- [Artem Malyshev](mailto:proofit404@gmail.com)
- [Asger Hautop Drewsen](mailto:asgerdrewsen@gmail.com)
- [Augie Fackler](mailto:raf@durin42.com)
- [Aviskar KC](mailto:aviskarkc10@gmail.com)
- [Benjamin Woodruff](mailto:github@benjam.info)
- [Brandt Bucher](mailto:brandtbucher@gmail.com)
- Charles Reid
- [Christian Heimes](mailto:christian@python.org)
- [Chuck Wooters](mailto:chuck.wooters@microsoft.com)
- [Cooper Ry Lees](mailto:me@cooperlees.com)
- [Daniel Hahler](mailto:github@thequod.de)
- [Daniel M. Capella](mailto:polycitizen@gmail.com)
- Daniele Esposti
- dylanjblack
- [Eli Treuherz](mailto:eli@treuherz.com)
- [Florent Thiery](mailto:fthiery@gmail.com)
- hauntsaninja
- Hugo van Kemenade
- [Ivan Katanić](mailto:ivan.katanic@gmail.com)
- [Jason Fried](mailto:me@jasonfried.info)
- [jgirardet](mailto:ijkl@netc.fr)
- [Joe Antonakakis](mailto:jma353@cornell.edu)
- [Jon Dufresne](mailto:jon.dufresne@gmail.com)
- [Jonas Obrist](mailto:ojiidotch@gmail.com)
- [Josh Bode](mailto:joshbode@fastmail.com)
- [Juan Luis Cano Rodríguez](mailto:hello@juanlu.space)
- [Katie McLaughlin](mailto:katie@glasnt.com)
- Lawrence Chan
- [Linus Groh](mailto:mail@linusgroh.de)
- [Luka Sterbic](mailto:luka.sterbic@gmail.com)
- Mariatta
- [Matt VanEseltine](mailto:vaneseltine@gmail.com)
- [Michael Flaxman](mailto:michael.flaxman@gmail.com)
- [Michael J. Sullivan](mailto:sully@msully.net)
- [Michael McClimon](mailto:michael@mcclimon.org)
- [Miguel Gaiowski](mailto:miggaiowski@gmail.com)
- [Mike](mailto:roshi@fedoraproject.org)
- [Min ho Kim](mailto:minho42@gmail.com)
- [Miroslav Shubernetskiy](mailto:miroslav@miki725.com)
- [Neraste](mailto:neraste.herr10@gmail.com)
- [Ofek Lev](mailto:ofekmeister@gmail.com)
- [Osaetin Daniel](mailto:osaetindaniel@gmail.com)
- [Pablo Galindo](mailto:Pablogsal@gmail.com)
- [Peter Bengtsson](mailto:mail@peterbe.com)
- pmacosta
- [Rishikesh Jha](mailto:rishijha424@gmail.com)
- [Stavros Korokithakis](mailto:hi@stavros.io)
- [Stephen Rosen](mailto:sirosen@globus.org)
- [Sunil Kapil](mailto:snlkapil@gmail.com)
- [Thom Lu](mailto:thomas.c.lu@gmail.com)
- [Tom Christie](mailto:tom@tomchristie.com)
- [Tzu-ping Chung](mailto:uranusjr@gmail.com)
- [Utsav Shah](mailto:ukshah2@illinois.edu)
- vezeli
- [Vishwas B Sharma](mailto:sharma.vishwas88@gmail.com)
- [Yngve Høiseth](mailto:yngve@hoiseth.net)
- [Yurii Karabas](mailto:1998uriyyo@gmail.com)