X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/09afd4d8b287a7401451541a93343987db979db8..2ebc050bbabaff69a2e17f8a350bc7440d4f08ff:/mr diff --git a/mr b/mr index ba0cf0a..7f147cc 100755 --- a/mr +++ b/mr @@ -16,6 +16,8 @@ B [options] commit [-m "message"] B [options] record [-m "message"] +B [options] fetch + B [options] push B [options] diff @@ -41,7 +43,7 @@ B [options] remember action [params ...] B is a Multiple Repository management tool. It can checkout, update, or perform other actions on a set of repositories as if they were one combined repository. It supports any combination of subversion, git, cvs, mercurial, -bzr, darcs and fossil repositories, and support for other version +bzr, darcs, fossil and veracity repositories, and support for other version control systems can easily be added. B cds into and operates on all registered repositories at or below your @@ -73,7 +75,8 @@ If a repository isn't checked out yet, it will first check it out. =item status Displays a status report for each repository, showing what -uncommitted changes are present in the repository. +uncommitted changes are present in the repository. For distributed version +control systems, also shows unpushed local branches. =item commit (or ci) @@ -91,6 +94,12 @@ remote repository. Only supported for distributed version control systems. The optional -m parameter allows specifying a commit message. +=item fetch + +Fetches from each repository's remote repository, but does not +update the working copy. Only supported for some distributed version +control systems. + =item push Pushes committed local changes to the remote repository. A no-op for @@ -116,8 +125,10 @@ These commands are also available: =item bootstrap url [directory] -Causes mr to download the url, and use it as a .mrconfig file -to checkout the repositories listed in it, into the specified directory. +Causes mr to download the url, and use it as a .mrconfig file to checkout +the repositories listed in it, into the specified directory. + +To use scp to download, the url may have the form ssh://[user@]host:file The directory will be created if it does not exist. If no directory is specified, the current directory will be used. @@ -212,6 +223,13 @@ Use the specified mrconfig file. The default is to use both F<~/.mrconfig> as well as look for a F<.mrconfig> file in the current directory, or in one of its parent directories. +=item -f + +=item --force + +Force mr to act on repositories that would normally be skipped due to their +configuration. + =item -v =item --verbose @@ -367,7 +385,7 @@ been at least 12 hours since the last update. Another way to use skip is for a lazy checkout. This makes mr skip operating on a repo unless it already exists. To enable the -repo, you have to explicitly check it out (using "mr -d foo checkout"). +repo, you have to explicitly check it out (using "mr --force -d foo checkout"). [foo] checkout = ... @@ -398,7 +416,7 @@ Unlike all other parameters, this parameter does not need to be placed within a section. B ships several libraries that can be included to add support for -additional version control type things (unison, git-svn, vcsh, git-fake-bare, +additional version control type things (unison, git-svn, git-fake-bare, git-subtree). To include them all, you could use: include = cat /usr/share/mr/* @@ -417,12 +435,11 @@ to keep track of and remember to delete old repositories. The "lib" parameter can specify some shell code that will be run before each command, this can be a useful way to define shell -functions for other commands to use. Unlike most other parameters, -this can be specified multiple times, in which case the chunks of -shell code are accumulatively concatenated together. This is -particularly useful because it allows the user to build a library of -shell functions defined in the [DEFAULT] section scattered across -various mr modules (files referenced by an C directive). +functions for other commands to use. + +Unlike most other parameters, this can be specified multiple times, in +which case the chunks of shell code are accumulatively concatenated +together. =item fixups @@ -431,31 +448,37 @@ is checked out, or updated. This provides an easy way to do things like permissions fixups, or other tweaks to the repository content, whenever the repository is changed. -=item pre_ and post_ - -If a "pre_action" parameter is set, its command is run before mr performs the -specified action. Similarly, "post_action" parameters are run after mr -successfully performs the specified action. For example, "pre_commit" is -run before committing; "post_update" is run after updating. - -=back +=item VCS_action When looking for a command to run for a given action, mr first looks for a parameter with the same name as the action. If that is not found, it looks for a parameter named "VCS_action" (substituting in the name of the -version control system and the action). The name of the version control -system is itself determined by running each defined "VCS_test" action, -until one succeeds. +version control system and the action). Internally, mr has settings for "git_update", "svn_update", etc. To change the action that is performed for a given version control system, you can override these VCS specific actions. To add a new version control system, you can just add VCS specific actions for it. -As with the C parameter, if a parameter is suffixed with -C<_append>, its value is concatenated to the existing value of the -parameter for that config block, rather than overwriting it. In this -way, actions such as C can be constructed accumulatively. +=item pre_ and post_ + +If a "pre_action" parameter is set, its command is run before mr performs the +specified action. Similarly, "post_action" parameters are run after mr +successfully performs the specified action. For example, "pre_commit" is +run before committing; "post_update" is run after updating. + +=item _append + +Any parameter can be suffixed with C<_append>, to add an additional value +to the existing value of the parameter. In this way, actions +can be constructed accumulatively. + +=item VCS_test + +The name of the version control system is itself determined by +running each defined "VCS_test" action, until one succeeds. + +=back =head1 UNTRUSTED MRCONFIG FILES @@ -518,6 +541,7 @@ my $config_overridden=0; my $verbose=0; my $quiet=0; my $stats=0; +my $force=0; my $insecure=0; my $interactive=0; my $max_depth; @@ -526,6 +550,7 @@ my $jobs=1; my $trust_all=0; my $directory=getcwd(); +my $HOME_MR_CONFIG = "$ENV{HOME}/.mrconfig"; $ENV{MR_CONFIG}=find_mrconfig(); # globals :-( @@ -537,6 +562,57 @@ my (@ok, @failed, @skipped); main(); +sub shellquote { + my $i=shift; + $i=~s/'/'"'"'/g; + return "'$i'"; +} + +# Runs a shell command using a supplied function. +# The lib will be included in the shell command line, and any params +# will be available in the shell as $1, $2, etc. +my $lastlib; +sub runsh { + my ($action, $topdir, $subdir, $command, $params, $runner) = @_; + + # optimisation: avoid running the shell for true and false + if ($command =~ /^\s*true\s*$/) { + $?=0; + return 0; + } + elsif ($command =~ /^\s*false\s*$/) { + $?=0; + return 1; + } + + my $quotedparams=join(" ", (map { shellquote($_) } @$params)); + my $lib=exists $config{$topdir}{$subdir}{lib} ? + $config{$topdir}{$subdir}{lib}."\n" : ""; + if ($verbose && (! defined $lastlib || $lastlib ne $lib)) { + print "mr library now: >>$lib<<\n"; + $lastlib=$lib; + } + my $shellcode="set -e;".$lib. + "my_sh(){ $command\n }; my_sh $quotedparams"; + print "mr $action: running $action >>$command<<\n" if $verbose; + $runner->($shellcode); +} + +my %perl_cache; +sub perl { + my $id=shift; + my $s=shift; + if ($s =~ m/^perl:\s+(.*)/s) { + return $perl_cache{$1} if exists $perl_cache{$1}; + my $sub=eval "sub {$1}"; + if (! defined $sub) { + print STDERR "mr: bad perl code in $id: $@\n"; + } + return $perl_cache{$1} = $sub; + } + return undef; +} + my %vcs; sub vcs_test { my ($action, $dir, $topdir, $subdir) = @_; @@ -545,33 +621,47 @@ sub vcs_test { return $vcs{$dir}; } - my $test="set -e\n"; + my $test=""; + my %perltest; foreach my $vcs_test ( sort { length $a <=> length $b || $a cmp $b } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) { - my ($vcs)=$vcs_test=~/(.*)_test/; - $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test; - $test.="if my_$vcs_test; then echo $vcs; fi\n"; + my ($vcs)=$vcs_test =~ /(.*)_test/; + my $p=perl($vcs_test, $config{$topdir}{$subdir}{$vcs_test}); + if (defined $p) { + $perltest{$vcs}=$p; + } + else { + $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test; + $test.="if my_$vcs_test; then echo $vcs; fi\n"; + } } - $test=$config{$topdir}{$subdir}{lib}."\n".$test - if exists $config{$topdir}{$subdir}{lib}; - - print "mr $action: running vcs test >>$test<<\n" if $verbose; - my $vcs=`$test`; - chomp $vcs; - if ($vcs=~/\n/s) { - $vcs=~s/\n/, /g; - print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n"; + + my @vcs; + foreach my $vcs (keys %perltest) { + if ($perltest{$vcs}->()) { + push @vcs, $vcs; + } + } + + push @vcs, split(/\n/, + runsh("vcs test", $topdir, $subdir, $test, [], sub { + my $sh=shift; + my $ret=`$sh`; + return $ret; + })) if length $test; + if (@vcs > 1) { + print STDERR "mr $action: found multiple possible repository types (@vcs) for ".fulldir($topdir, $subdir)."\n"; return undef; } - if (! length $vcs) { + if (! @vcs) { return $vcs{$dir}=undef; } else { - return $vcs{$dir}=$vcs; + return $vcs{$dir}=$vcs[0]; } } @@ -605,10 +695,9 @@ sub fulldir { sub action { my ($action, $dir, $topdir, $subdir, $force_checkout) = @_; my $fulldir=fulldir($topdir, $subdir); + my $checkout_dir; $ENV{MR_CONFIG}=$configfiles{$topdir}; - my $lib=exists $config{$topdir}{$subdir}{lib} ? - $config{$topdir}{$subdir}{lib}."\n" : ""; my $is_checkout=($action eq 'checkout'); my $is_update=($action =~ /update/); @@ -616,13 +705,14 @@ sub action { $ENV{MR_ACTION}=$action; foreach my $testname ("skip", "deleted") { + next if $force && $testname eq "skip"; + my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout); if (defined $testcommand) { - my $test="set -e;".$lib. - "my_action(){ $testcommand\n }; my_action '$action'"; - print "mr $action: running $testname test >>$test<<\n" if $verbose; - my $ret=system($test); + my $ret=runsh "$testname test", $topdir, $subdir, + $testcommand, [$action], + sub { system(shift()) }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $action: interrupted\n"; @@ -647,6 +737,7 @@ sub action { } if ($is_checkout) { + $checkout_dir=$dir; if (! $force_checkout) { if (-d $dir) { print "mr $action: $dir already exists, skipping checkout\n" if $verbose; @@ -699,22 +790,22 @@ sub action { my $hookret=hook("pre_$action", $topdir, $subdir); return $hookret if $hookret != OK; - $command="set -e; ".$lib. - "my_action(){ $command\n }; my_action ". - join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV); - print "mr $action: running >>$command<<\n" if $verbose; - my $ret; - if ($quiet) { - my $output = qx/$command 2>&1/; - $ret = $?; - if ($ret != 0) { - print "$actionmsg\n"; - print STDERR $output; - } - } - else { - $ret=system($command); - } + my $ret=runsh $action, $topdir, $subdir, + $command, \@ARGV, sub { + my $sh=shift; + if ($quiet) { + my $output = qx/$sh 2>&1/; + my $ret = $?; + if ($ret != 0) { + print "$actionmsg\n"; + print STDERR $output; + } + return $ret; + } + else { + system($sh); + } + }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $action: interrupted\n"; @@ -750,7 +841,13 @@ sub action { my $ret=hook("post_$action", $topdir, $subdir); return $ret if $ret != OK; - if (($is_checkout || $is_update)) { + if ($is_checkout || $is_update) { + if ($is_checkout && ! $no_chdir) { + if (! chdir($checkout_dir)) { + print STDERR "mr $action: failed to chdir to $checkout_dir: $!\n"; + return FAILED; + } + } my $ret=hook("fixups", $topdir, $subdir); return $ret if $ret != OK; } @@ -765,22 +862,20 @@ sub hook { my $command=$config{$topdir}{$subdir}{$hook}; return OK unless defined $command; - my $lib=exists $config{$topdir}{$subdir}{lib} ? - $config{$topdir}{$subdir}{lib}."\n" : ""; - my $shell="set -e;".$lib. - "my_hook(){ $command\n }; my_hook"; - print "mr $hook: running >>$shell<<\n" if $verbose; - my $ret; - if ($quiet) { - my $output = qx/$shell 2>&1/; - $ret = $?; - if ($ret != 0) { - print STDERR $output; - } - } - else { - $ret=system($shell); - } + my $ret=runsh $hook, $topdir, $subdir, $command, [], sub { + my $sh=shift; + if ($quiet) { + my $output = qx/$sh 2>&1/; + my $ret = $?; + if ($ret != 0) { + print STDERR $output; + } + return $ret; + } + else { + system($sh); + } + }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $hook: interrupted\n"; @@ -1018,14 +1113,14 @@ sub is_trusted_config { my $config=shift; # must be abs_pathed already # We always trust ~/.mrconfig. - return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig"); + return 1 if $config eq abs_path($HOME_MR_CONFIG); return 1 if $trust_all; my $trustfile=$ENV{HOME}."/.mrtrust"; if (! %trusted) { - $trusted{"$ENV{HOME}/.mrconfig"}=1; + $trusted{$HOME_MR_CONFIG}=1; if (open (TRUST, "<", $trustfile)) { while () { chomp; @@ -1117,20 +1212,6 @@ sub is_trusted_checkout { return 0; } -sub trusterror { - my ($err, $file, $line, $url)=@_; - - if (defined $url) { - die "$err in untrusted $url line $line\n". - "(To trust this url, --trust-all can be used; but please use caution;\n". - "this can allow arbitrary code execution!)\n"; - } - else { - die "$err in untrusted $file line $line\n". - "(To trust this file, list it in ~/.mrtrust.)\n"; - } -} - my %loaded; sub loadconfig { my $f=shift; @@ -1195,30 +1276,42 @@ sub loadconfig { # Keep track of the current line in the config file; # when a file is included track the current line from the include. - my $line=0; + my $lineno=0; my $included=undef; - my $includeline=0; + + my $line; my $nextline = sub { if ($included) { - $includeline++; $included--; } else { $included=undef; - $includeline=0; - $line++; + $lineno++; } - my $l=shift @lines; - chomp $l; - return $l + $line=shift @lines; + chomp $line; + return $line; }; my $lineerror = sub { my $msg=shift; if (defined $included) { - die "mr: $f line $line include line $includeline: $msg\n"; + die "mr: $msg at $f line $lineno, included line: $line\n"; + } + else { + die "mr: $msg at $f line $lineno\n"; + } + }; + my $trusterror = sub { + my $msg=shift; + + if (defined $bootstrap_url) { + die "mr: $msg in untrusted $bootstrap_url line $lineno\n". + "(To trust this url, --trust-all can be used; but please use caution;\n". + "this can allow arbitrary code execution!)\n"; } else { - die "mr: $f line $line: $msg\n"; + die "mr: $msg in untrusted $f line $lineno\n". + "(To trust this file, list it in ~/.mrtrust.)\n"; } }; @@ -1226,7 +1319,7 @@ sub loadconfig { $_=$nextline->(); if (! $trusted && /[[:cntrl:]]/) { - trusterror("mr: illegal control character", $f, $line, $bootstrap_url); + $trusterror->("illegal control character"); } next if /^\s*\#/ || /^\s*$/; @@ -1237,7 +1330,7 @@ sub loadconfig { if (! is_trusted_repo($section) || $section eq 'ALIAS' || $section eq 'DEFAULT') { - trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url) + $trusterror->("illegal section \"[$section]\""); } } $section=expandenv($section) if $trusted; @@ -1264,7 +1357,7 @@ sub loadconfig { # settings in specific known-safe formats. if ($parameter eq 'checkout') { if (! is_trusted_checkout($value)) { - trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url); + $trusterror->("illegal checkout command \"$value\""); } } elsif ($parameter eq 'order') { @@ -1276,7 +1369,7 @@ sub loadconfig { # safe. } else { - trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url); + $trusterror->("illegal setting \"$parameter=$value\""); } } @@ -1579,11 +1672,18 @@ sub bootstrap { eval q{use File::Temp}; die $@ if $@; my $tmpconfig=File::Temp->new(); - my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); - push(@curlargs, "-k") if $insecure; - my $curlstatus = system(@curlargs); - die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60; - die "mr bootstrap: download of $url failed\n" if $curlstatus != 0; + my @downloader; + if ($url =~ m!^ssh://(.*)!) { + @downloader = ("scp", $1, $tmpconfig); + } + else { + @downloader = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); + push(@downloader, "-k") if $insecure; + } + my $status = system(@downloader); + die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" + if $downloader[0] eq 'curl' && $status >> 8 == 60; + die "mr bootstrap: download of $url failed\n" if $status != 0; if (! -e $dir) { system("mkdir", "-p", $dir); @@ -1649,7 +1749,7 @@ sub find_mrconfig { } $dir=~s/\/[^\/]*$//; } - return "$ENV{HOME}/.mrconfig"; + return $HOME_MR_CONFIG; } sub getopts { @@ -1659,6 +1759,7 @@ sub getopts { "d|directory=s" => sub { $directory=abs_path($_[1]) }, "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 }, "p|path" => sub { }, # now default, ignore + "f|force" => \$force, "v|verbose" => \$verbose, "q|quiet" => \$quiet, "s|stats" => \$stats, @@ -1718,7 +1819,7 @@ sub main { init(); startingconfig(); - loadconfig("$ENV{HOME}/.mrconfig"); + loadconfig($HOME_MR_CONFIG); loadconfig($ENV{MR_CONFIG}); #use Data::Dumper; print Dumper(\%config); @@ -1775,24 +1876,29 @@ lib = LANG=C bzr info | egrep -q '^Checkout' } lazy() { - if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then + if [ -d "$MR_REPO" ]; then return 1 else return 0 fi } -svn_test = test -d "$MR_REPO"/.svn -git_test = test -d "$MR_REPO"/.git -bzr_test = test -d "$MR_REPO"/.bzr -cvs_test = test -d "$MR_REPO"/CVS -hg_test = test -d "$MR_REPO"/.hg -darcs_test = test -d "$MR_REPO"/_darcs -fossil_test = test -f "$MR_REPO"/_FOSSIL_ -git_bare_test = - test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags && - test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config && - test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true +svn_test = perl: -d "$ENV{MR_REPO}/.svn" +git_test = perl: -e "$ENV{MR_REPO}/.git" +bzr_test = perl: -d "$ENV{MR_REPO}/.bzr" +cvs_test = perl: -d "$ENV{MR_REPO}/CVS" +hg_test = perl: -d "$ENV{MR_REPO}/.hg" +darcs_test = perl: -d "$ENV{MR_REPO}/_darcs" +fossil_test = perl: -f "$ENV{MR_REPO}/_FOSSIL_" +git_bare_test = perl: + -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" && + -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" && + `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get core.bare` =~ /true/ +vcsh_test = perl: + -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" && + -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" && + `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get vcsh.vcsh` =~ /true/ +veracity_test = perl: -d "$ENV{MR_REPO}/.sgdrawer" svn_update = svn update "$@" git_update = git pull "$@" @@ -1802,18 +1908,27 @@ bzr_update = else bzr merge --pull "$@" fi -cvs_update = cvs update "$@" -hg_update = hg pull "$@" && hg update "$@" +cvs_update = cvs -q update "$@" +hg_update = hg pull "$@"; hg update "$@" darcs_update = darcs pull -a "$@" fossil_update = fossil pull "$@" +vcsh_update = vcsh run "$MR_REPO" git pull "$@" +veracity_update = vv pull "$@" && vv update "$@" + +git_fetch = git fetch --all --prune --tags +git_svn_fetch = git svn fetch +darcs_fetch = darcs fetch +hg_fetch = hg pull svn_status = svn status "$@" -git_status = git status -s "$@" || true -bzr_status = bzr status --short "$@" +git_status = git status -s "$@" || true; git --no-pager log --branches --not --remotes --simplify-by-decoration --decorate --oneline || true +bzr_status = bzr status --short "$@"; bzr missing cvs_status = cvs status "$@" -hg_status = hg status "$@" +hg_status = hg status "$@"; hg summary --quiet | grep -v 'parent: 0:' darcs_status = darcs whatsnew -ls "$@" || true fossil_status = fossil changes "$@" +vcsh_status = vcsh run "$MR_REPO" git -c status.relativePaths=false status -s "$@" || true +veracity_status = vv status "$@" svn_commit = svn commit "$@" git_commit = git commit -a "$@" && git push --all @@ -1824,9 +1939,11 @@ bzr_commit = bzr commit "$@" && bzr push fi cvs_commit = cvs commit "$@" -hg_commit = hg commit -m "$@" && hg push -darcs_commit = darcs record -a -m "$@" && darcs push -a +hg_commit = hg commit "$@" && hg push +darcs_commit = darcs record -a "$@" && darcs push -a fossil_commit = fossil commit "$@" +vcsh_commit = vcsh run "$MR_REPO" git commit -a "$@" && vcsh run "$MR_REPO" git push --all +veracity_commit = vv commit "$@" && vv push git_record = git commit -a "$@" bzr_record = @@ -1835,9 +1952,11 @@ bzr_record = else bzr commit "$@" fi -hg_record = hg commit -m "$@" -darcs_record = darcs record -a -m "$@" +hg_record = hg commit "$@" +darcs_record = darcs record -a "$@" fossil_record = fossil commit "$@" +vcsh_record = vcsh run "$MR_REPO" git commit -a "$@" +veracity_record = vv commit "$@" svn_push = : git_push = git push "$@" @@ -1846,14 +1965,18 @@ cvs_push = : hg_push = hg push "$@" darcs_push = darcs push -a "$@" fossil_push = fossil push "$@" +vcsh_push = vcsh run "$MR_REPO" git push "$@" +veracity_push = vv push "$@" svn_diff = svn diff "$@" git_diff = git diff "$@" bzr_diff = bzr diff "$@" -cvs_diff = cvs diff "$@" +cvs_diff = cvs -q diff "$@" hg_diff = hg diff "$@" darcs_diff = darcs diff -u "$@" fossil_diff = fossil diff "$@" +vcsh_diff = vcsh run "$MR_REPO" git diff "$@" +veracity_diff = vv diff "$@" svn_log = svn log "$@" git_log = git log "$@" @@ -1863,6 +1986,15 @@ hg_log = hg log "$@" darcs_log = darcs changes "$@" git_bare_log = git log "$@" fossil_log = fossil timeline "$@" +vcsh_log = vcsh run "$MR_REPO" git log "$@" +veracity_log = vv log "$@" + +hg_grep = hg grep "$@" +cvs_grep = ack-grep "$@" +svn_grep = ack-grep "$@" +git_svn_grep = git grep "$@" +git_grep = git grep "$@" +bzr_grep = ack-grep "$@" run = "$@" @@ -1881,7 +2013,7 @@ git_register = echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'" bzr_register = - url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`" + url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}' | head -n 1`" if [ -z "$url" ]; then error "cannot determine bzr url" fi @@ -1910,11 +2042,23 @@ git_bare_register = fi echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'" +vcsh_register = + url="`LC_ALL=C vcsh run "$MR_REPO" git config --get remote.origin.url`" || true + if [ -z "$url" ]; then + error "cannot determine git url" + fi + echo "Registering git url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="vcsh clone '$url' '$MR_REPO'" fossil_register = url=`fossil remote-url` repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'` echo "Registering fossil repository $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'" +veracity_register = + url=`vv config | grep sync_targets | sed -e 's/sync_targets:*.//g' -e 's/ //g'` + repo=`vv repo info | grep repository | sed -e 's/Current repository:*.//g' -e 's/ //g'` + echo "Registering veracity repository $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && vv checkout '$repo'" svn_trusted_checkout = svn co $url $repo svn_alt_trusted_checkout = svn checkout $url $repo @@ -1924,7 +2068,9 @@ bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo hg_trusted_checkout = hg clone $url $repo darcs_trusted_checkout = darcs get $url $repo git_bare_trusted_checkout = git clone --bare $url $repo +vcsh_trusted_checkout = vcsh run "$MR_REPO" git clone $url $repo # fossil: messy to do +veracity_trusted_checkout = vv clone $url $repo help =