X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/397a70209cc535de92f9565c9da25051e065e3e0..9c3234f5d553312f47d934f70bd1481bed58df9e:/mr diff --git a/mr b/mr index 29001e0..42ae961 100755 --- a/mr +++ b/mr @@ -1,7 +1,5 @@ #!/usr/bin/perl -#man{{{ - =head1 NAME mr - a Multiple Repository management tool @@ -16,29 +14,41 @@ B [options] status B [options] commit [-m "message"] +B [options] record [-m "message"] + B [options] diff B [options] log +B [options] bootstrap url [directory] + B [options] register [repository] B [options] config section ["parameter=[value]" ...] B [options] action [params ...] +B [options] [online|offline] + +B [options] remember action [params ...] + =head1 DESCRIPTION B is a Multiple Repository management tool. It can checkout, update, or perform other actions on a set of repositories as if they were one combined -respository. It supports any combination of subversion, git, cvs, mecurial, -bzr and darcs repositories, and support for other revision control systems can -easily be added. +repository. It supports any combination of subversion, git, cvs, mercurial, +bzr, darcs and fossil repositories, and support for other revision +control systems can easily be added. B cds into and operates on all registered repositories at or below your working directory. Or, if you are in a subdirectory of a repository that contains no other registered repositories, it will stay in that directory, and work on only that repository, +B is configured by .mrconfig files, which list the repositories. It +starts by reading the .mrconfig file in your home directory, and this can +in turn chain load .mrconfig files from repositories. + These predefined commands should be fairly familiar to users of any revision control system: @@ -62,10 +72,24 @@ uncommitted changes are present in the repository. =item commit (or ci) Commits changes to each repository. (By default, changes are pushed to the -remote repository too, when using distributed systems like git.) +remote repository too, when using distributed systems like git. If you +don't like this default, you can change it in your .mrconfig, or use record +instead.) The optional -m parameter allows specifying a commit message. +=item record + +Records changes to the local repository, but does not push them to the +remote repository. Only supported for distributed revision control systems. + +The optional -m parameter allows specifying a commit message. + +=item push + +Pushes committed local changes to the remote repository. A no-op for +centralized revision control systems. + =item diff Show a diff of uncommitted changes. @@ -80,6 +104,17 @@ These commands are also available: =over 4 +=item bootstrap url [directory] + +Causes mr to download the url, and use it as a .mrconfig file +to checkout the repositories listed in it, into the specified directory. + +The directory will be created if it does not exist. If no directory is +specified, the current directory will be used. + +If the .mrconfig file includes a repository named ".", that +is checked out into the top of the specified directory. + =item list (or ls) List the repositories that mr will act on. @@ -115,14 +150,32 @@ To see the built-in library of shell functions contained in mr: The ~/.mrconfig file is used by default. To use a different config file, use the -c option. +=item offline + +Advises mr that it is in offline mode. Any commands that fail in +offline mode will be remembered, and retried when mr is told it's online. + +=item online + +Advices mr that it is in online mode again. Commands that failed while in +offline mode will be re-run. + +=item remember + +Remember a command, to be run later when mr re-enters online mode. This +implicitly puts mr into offline mode. The command can be any regular mr +command. This is useful when you know that a command will fail due to being +offline, and so don't want to run it right now at all, but just remember +to run it when you go back online. + =item help Displays this help. =back -Actions can be abbreviated to any unambiguous subsctring, so -"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr +Actions can be abbreviated to any unambiguous substring, so +"mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr update" Additional parameters can be passed to most commands, and are passed on @@ -136,40 +189,90 @@ system. =item -d directory +=item --directory directory + Specifies the topmost directory that B should work in. The default is the current working directory. =item -c mrconfig +=item --config mrconfig + Use the specified mrconfig file. The default is B<~/.mrconfig> +=item -p + +=item --path + +Search in the current directory, and its parent directories and use +the first B<.mrconfig> found, instead of the default B<~/.mrconfig>. + =item -v +=item --verbose + Be verbose. +=item -q + +=item --quiet + +Be quiet. + +=item -k + +=item --insecure + +Accept untrusted SSL certificates when bootstrapping. + =item -s +=item --stats + Expand the statistics line displayed at the end to include information about exactly which repositories failed and were skipped, if any. -=item -n +=item -i -Just operate on the repository for the current directory, do not -recurse into deeper repositories. +=item --interactive -=item -j number +Interactive mode. If a repository fails to be processed, a subshell will be +started which you can use to resolve or investigate the problem. Exit the +subshell to continue the mr run. -Run the specified number of jobs in parallel. This can greatly speed up -operations such as updates. It is not recommended for interactive -operations. +=item -n [number] -=back +=item --no-recurse [number] + +If no number if specified, just operate on the repository for the current +directory, do not recurse into deeper repositories. + +If a number is specified, will recurse into repositories at most that many +subdirectories deep. For example, with -n 2 it would recurse into ./src/foo, +but not ./src/packages/bar. + +=item -j [number] + +=item --jobs [number] + +Run the specified number of jobs in parallel, or an unlimited number of jobs +with no number specified. This can greatly speed up operations such as updates. +It is not recommended for interactive operations. -=head1 FILES +Note that running more than 10 jobs at a time is likely to run afoul of +ssh connection limits. Running between 3 and 5 jobs at a time will yield +a good speedup in updates without loading the machine too much. + +=item -t + +=item --trust-all + +Trust all mrconfig files even if they are not listed in ~/.mrtrust. +Use with caution. + +=back -B is configured by .mrconfig files. It starts by reading the .mrconfig -file in your home directory, and this can in turn chain load .mrconfig files -from repositories. +=head1 MRCONFIG FILES Here is an example .mrconfig file: @@ -195,7 +298,9 @@ is an alias, and its value is the action to use. All other sections add repositories. The section header specifies the directory where the repository is located. This is relative to the directory that contains the mrconfig file, but you can also choose to use absolute -paths. +paths. (Note that you can use environment variables in section names; they +will be passed through the shell for expansion. For example, +"[$HOSTNAME]", or "[${HOSTNAME}foo]") Within a section, each parameter defines a shell command to run to handle a given action. mr contains default handlers for "update", "status", @@ -232,7 +337,7 @@ mr is run by joey. The second uses the hours_since function (included in mr's built-in library) to skip updating the repo unless it's been at least 12 hours since the last update. - skip = test $(whoami) != joey + skip = test `whoami` != joey skip = [ "$1" = update ] && ! hours_since "$1" 12 =item order @@ -248,8 +353,7 @@ repository, ordering it to be processed earlier is not recommended. =item chain If the "chain" parameter is set and its command returns true, then B -will try to load a .mrconfig file from the root of the repository. (You -should avoid chaining from repositories with untrusted committers.) +will try to load a .mrconfig file from the root of the repository. =item include @@ -280,9 +384,36 @@ the action that is performed for a given revision control system, you can override these rcs specific actions. To add a new revision control system, you can just add rcs specific actions for it. +The ~/.mrlog file contains commands that mr has remembered to run later, +due to being offline. You can delete or edit this file to remove commands, +or even to add other commands for 'mr online' to run. If the file is +present, mr assumes it is in offline mode. + +=head1 UNTRUSTED MRCONFIG FILES + +Since mrconfig files can contain arbitrary shell commands, they can do +anything. This flexibility is good, but it also allows a malicious mrconfig +file to delete your whole home directory. Such a file might be contained +inside a repository that your main ~/.mrconfig checks out and chains to. To +avoid worries about evil commands in a mrconfig file, mr +has the ability to read mrconfig files in untrusted mode. Such files are +limited to running only known safe commands (like "git clone") in a +carefully checked manner. + +By default, mr trusts all mrconfig files. (This default will change in a +future release!) But if you have a ~/.mrtrust file, mr will only trust +mrconfig files that are listed within it. (One file per line.) All other +files will be treated as untrusted. + +=head1 EXTENSIONS + +mr can be extended to support things such as unison and git-svn. Some +files providing such extensions are available in /usr/share/mr/. See +the documentation in the files for details about using them. + =head1 AUTHOR -Copyright 2007 Joey Hess +Copyright 2007-2010 Joey Hess Licensed under the GNU GPL version 2 or higher. @@ -290,8 +421,6 @@ http://kitenet.net/~joey/code/mr/ =cut -#}}} - use warnings; use strict; use Getopt::Long; @@ -308,11 +437,16 @@ use constant { # configurables my $config_overridden=0; my $verbose=0; +my $quiet=0; my $stats=0; -my $no_recurse=0; +my $insecure=0; +my $interactive=0; +my $max_depth; my $no_chdir=0; my $jobs=1; +my $trust_all=0; my $directory=getcwd(); +$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig"; # globals :-( my %config; @@ -323,9 +457,14 @@ my (@ok, @failed, @skipped); main(); -sub rcs_test { #{{{ +my %rcs; +sub rcs_test { my ($action, $dir, $topdir, $subdir) = @_; + if (exists $rcs{$dir}) { + return $rcs{$dir}; + } + my $test="set -e\n"; foreach my $rcs_test ( sort { @@ -349,14 +488,14 @@ sub rcs_test { #{{{ return undef; } if (! length $rcs) { - return undef; + return $rcs{$dir}=undef; } else { - return $rcs; + return $rcs{$dir}=$rcs; } -} #}}} +} -sub findcommand { #{{{ +sub findcommand { my ($action, $dir, $topdir, $subdir, $is_checkout) = @_; if (exists $config{$topdir}{$subdir}{$action}) { @@ -376,23 +515,27 @@ sub findcommand { #{{{ else { return undef; } -} #}}} - -sub action { #{{{ - my ($action, $dir, $topdir, $subdir) = @_; +} +sub action { + my ($action, $dir, $topdir, $subdir, $force_checkout) = @_; + $ENV{MR_CONFIG}=$configfiles{$topdir}; my $lib=exists $config{$topdir}{$subdir}{lib} ? $config{$topdir}{$subdir}{lib}."\n" : ""; my $is_checkout=($action eq 'checkout'); + $ENV{MR_REPO}=$dir; + if ($is_checkout) { - if (-d $dir) { - print "mr $action: $dir already exists, skipping checkout\n" if $verbose; - return SKIPPED; + if (! $force_checkout) { + if (-d $dir) { + print "mr $action: $dir already exists, skipping checkout\n" if $verbose; + return SKIPPED; + } + + $dir=~s/^(.*)\/[^\/]+\/?$/$1/; } - - $dir=~s/^(.*)\/[^\/]+\/?$/$1/; } elsif ($action =~ /update/) { if (! -d $dir) { @@ -400,8 +543,6 @@ sub action { #{{{ } } - $ENV{MR_REPO}=$dir; - my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout); my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout); @@ -442,18 +583,18 @@ sub action { #{{{ return FAILED; } else { - print STDERR "mr $action: no defined $action command for $rcs repository $topdir$subdir, skipping\n"; + print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n"; return SKIPPED; } } else { if (! $no_chdir) { - print "mr $action: $topdir$subdir\n"; + print "mr $action: $topdir$subdir\n" unless $quiet; } else { my $s=$directory; $s=~s/^\Q$topdir$subdir\E\/?//; - print "mr $action: $topdir$subdir (in subdir $s)\n"; + print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet; } $command="set -e; ".$lib. "my_action(){ $command\n }; my_action ". @@ -472,6 +613,14 @@ sub action { #{{{ print STDERR "mr $action: failed ($ret)\n" if $verbose; if ($ret >> 8 != 0) { print STDERR "mr $action: command failed\n"; + if (-e "$ENV{HOME}/.mrlog" && $action ne 'remember') { + # recreate original command line to + # remember, and avoid recursing + my @orig=@ARGV; + @ARGV=('-n', $action, @orig); + action("remember", $dir, $topdir, $subdir); + @ARGV=@orig; + } } elsif ($ret != 0) { print STDERR "mr $action: command died ($ret)\n"; @@ -487,10 +636,10 @@ sub action { #{{{ return OK; } } -} #}}} +} # run actions on multiple repos, in parallel -sub mrs { #{{{ +sub mrs { my $action=shift; my @repos=@_; @@ -500,7 +649,7 @@ sub mrs { #{{{ my @out; my $running=0; while (@fhs or @repos) { - while ($running < $jobs && @repos) { + while ((!$jobs || $running < $jobs) && @repos) { $running++; my $repo = shift @repos; pipe(my $outfh, CHILD_STDOUT); @@ -557,19 +706,24 @@ sub mrs { #{{{ } } } -} #}}} +} -sub record { #{{{ +sub record { my $dir=shift()->[0]; my $ret=shift; if ($ret == OK) { push @ok, $dir; - print "\n"; + print "\n" unless $quiet; } elsif ($ret == FAILED) { + if ($interactive) { + chdir($dir) unless $no_chdir; + print STDERR "mr: Starting interactive shell. Exit shell to continue.\n"; + system((getpwuid($<))[8], "-i"); + } push @failed, $dir; - print "\n"; + print "\n" unless $quiet; } elsif ($ret == SKIPPED) { push @skipped, $dir; @@ -580,9 +734,9 @@ sub record { #{{{ else { die "unknown exit status $ret"; } -} #}}} +} -sub showstats { #{{{ +sub showstats { my $action=shift; if (! @ok && ! @failed && ! @skipped) { die "mr $action: no repositories found to work on\n"; @@ -591,18 +745,18 @@ sub showstats { #{{{ showstat($#ok+1, "ok", "ok"), showstat($#failed+1, "failed", "failed"), showstat($#skipped+1, "skipped", "skipped"), - ).")\n"; + ).")\n" unless $quiet; if ($stats) { if (@skipped) { - print "mr $action: (skipped: ".join(" ", @skipped).")\n"; + print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet; } if (@failed) { print STDERR "mr $action: (failed: ".join(" ", @failed).")\n"; } } -} #}}} +} -sub showstat { #{{{ +sub showstat { my $count=shift; my $singular=shift; my $plural=shift; @@ -610,10 +764,10 @@ sub showstat { #{{{ return "$count ".($count > 1 ? $plural : $singular); } return; -} #}}} +} # an ordered list of repos -sub repolist { #{{{ +sub repolist { my @list; foreach my $topdir (sort keys %config) { foreach my $subdir (sort keys %{$config{$topdir}}) { @@ -631,22 +785,36 @@ sub repolist { #{{{ || $a->{subdir} cmp $b->{subdir} } @list; -} #}}} +} + +sub repodir { + my $repo=shift; + my $topdir=$repo->{topdir}; + my $subdir=$repo->{subdir}; + my $ret=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + $ret=~s/\/\.$//; + return $ret; +} # figure out which repos to act on -sub selectrepos { #{{{ +sub selectrepos { my @repos; foreach my $repo (repolist()) { my $topdir=$repo->{topdir}; my $subdir=$repo->{subdir}; next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $dir=repodir($repo); my $d=$directory; $dir.="/" unless $dir=~/\/$/; $d.="/" unless $d=~/\/$/; - next if $no_recurse && $d ne $dir; next if $dir ne $d && $dir !~ /^\Q$d\E/; + if (defined $max_depth) { + my @a=split('/', $dir); + my @b=split('/', $d); + do { } while (@a && @b && shift(@a) eq shift(@b)); + next if @a > $max_depth || @b > $max_depth; + } push @repos, [$dir, $topdir, $subdir]; } if (! @repos) { @@ -656,7 +824,7 @@ sub selectrepos { #{{{ my $subdir=$repo->{subdir}; next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $dir=repodir($repo); my $d=$directory; $dir.="/" unless $dir=~/\/$/; $d.="/" unless $d=~/\/$/; @@ -668,19 +836,143 @@ sub selectrepos { #{{{ $no_chdir=1; } return @repos; -} #}}} +} + +sub expandenv { + my $val=shift; + + + if ($val=~/\$/) { + $val=`echo "$val"`; + chomp $val; + } + + return $val; +} + +my %trusted; +sub is_trusted_config { + my $config=shift; # must be abs_pathed already + + # We always trust ~/.mrconfig. + return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig"); + + return 1 if $trust_all; + + my $trustfile=$ENV{HOME}."/.mrtrust"; + + if (! -e $trustfile) { + print "mr: Assuming $config is trusted.\n"; + print "mr: For better security, you are encouraged to create ~/.mrtrust\n"; + print "mr: and list all trusted mrconfig files in it.\n"; + return 1; + } + + if (! %trusted) { + $trusted{"$ENV{HOME}/.mrconfig"}=1; + open (TRUST, "<", $trustfile) || die "$trustfile: $!"; + while () { + chomp; + s/^~\//$ENV{HOME}\//; + $trusted{abs_path($_)}=1; + } + close TRUST; + } + + return $trusted{$config}; +} + + +sub is_trusted_repo { + my $repo=shift; + + # Tightly limit what is allowed in a repo name. + # No ../, no absolute paths, and no unusual filenames + # that might try to escape to the shell. + return $repo =~ /^[-_.+\/A-Za-z0-9]+$/ && + $repo !~ /\.\./ && $repo !~ /^\//; +} + +sub is_trusted_checkout { + my $command=shift; + + # To determine if the command is safe, compare it with the + # *_trusted_checkout config settings. Those settings are + # templates for allowed commands, so make sure that each word + # of the command matches the corresponding word of the template. + + my @words; + foreach my $word (split(' ', $command)) { + # strip quoting + if ($word=~/^'(.*)'$/) { + $word=$1; + } + elsif ($word=~/^"(.*)"$/) { + $word=$1; + } + + push @words, $word; + } + + foreach my $key (grep { /_trusted_checkout$/ } + keys %{$config{''}{DEFAULT}}) { + my @twords=split(' ', $config{''}{DEFAULT}{$key}); + next if @words > @twords; + + my $match=1; + my $url; + for (my $c=0; $c < @twords && $match; $c++) { + if ($twords[$c] eq '$url') { + # Match all the typical characters found in + # urls, plus @ which svn can use. Note + # that the "url" might also be a local + # directory. + $match=( + defined $words[$c] && + $words[$c] =~ /^[-_.+:@\/A-Za-z0-9]+$/ + ); + $url=$words[$c]; + } + elsif ($twords[$c] eq '$repo') { + # If a repo is not specified, assume it + # will be the last path component of the + # url, or something derived from it, and + # check that. + if (! defined $words[$c] && defined $url) { + ($words[$c])=$url=~/\/([^\/]+)\/?$/; + } + + $match=( + defined $words[$c] && + is_trusted_repo($words[$c]) + ); + } + elsif (defined $words[$c] && $twords[$c] eq $words[$c]) { + $match=1; + } + else { + $match=0; + } + } + return 1 if $match; + } + + return 0; +} my %loaded; -sub loadconfig { #{{{ +sub loadconfig { my $f=shift; + my $dir=shift; my @toload; my $in; - my $dir; + my $trusted; if (ref $f eq 'GLOB') { $dir=""; - $in=$f; + $in=$f; + $trusted=1; } else { if (! -e $f) { @@ -693,10 +985,15 @@ sub loadconfig { #{{{ } $loaded{$absf}=1; - ($dir)=$f=~/^(.*\/)[^\/]+$/; + $trusted=is_trusted_config($absf); + if (! defined $dir) { - $dir="."; + ($dir)=$f=~/^(.*\/)[^\/]+$/; + if (! defined $dir) { + $dir="."; + } } + $dir=abs_path($dir)."/"; if (! exists $configfiles{$dir}) { @@ -720,7 +1017,7 @@ sub loadconfig { #{{{ open($in, "<", $f) || die "mr: open $f: $!\n"; } my @lines=<$in>; - close $in; + close $in unless ref $f eq 'GLOB'; my $section; my $line=0; @@ -731,6 +1028,21 @@ sub loadconfig { #{{{ next if /^\s*\#/ || /^\s*$/; if (/^\[([^\]]*)\]\s*$/) { $section=$1; + + if (! $trusted) { + if (! is_trusted_repo($section) || + $section eq 'ALIAS' || + $section eq 'DEFAULT') { + die "mr: illegal section \"[$section]\" in untrusted $f line $line\n"; + } + } + $section=expandenv($section) if $trusted; + if ($section ne 'ALIAS' && + ! exists $config{$dir}{$section} && + exists $config{$dir}{DEFAULT}) { + # copy in defaults + $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} }; + } } elsif (/^(\w+)\s*=\s*(.*)/) { my $parameter=$1; @@ -744,21 +1056,29 @@ sub loadconfig { #{{{ chomp $value; } + if (! $trusted) { + # Untrusted files can only contain checkout + # parameters. + if ($parameter ne 'checkout') { + die "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line\n"; + } + if (! is_trusted_checkout($value)) { + die "mr: illegal checkout command \"$value\" in untrusted $f line $line\n"; + } + } + if ($parameter eq "include") { print "mr: including output of \"$value\"\n" if $verbose; unshift @lines, `$value`; + if ($?) { + print STDERR "mr: include command exited nonzero ($?)\n"; + } next; } if (! defined $section) { die "$f line $.: parameter ($parameter) not in section\n"; } - if ($section ne 'ALIAS' && - ! exists $config{$dir}{$section} && - exists $config{$dir}{DEFAULT}) { - # copy in defaults - $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} }; - } if ($section eq 'ALIAS') { $alias{$parameter}=$value; } @@ -800,9 +1120,16 @@ sub loadconfig { #{{{ foreach (@toload) { loadconfig($_); } -} #}}} +} -sub modifyconfig { #{{{ +sub startingconfig { + %alias=%config=%configfiles=%knownactions=%loaded=(); + my $datapos=tell(DATA); + loadconfig(\*DATA); + seek(DATA,$datapos,0); # rewind +} + +sub modifyconfig { my $f=shift; # the section to modify or add my $targetsection=shift; @@ -853,7 +1180,7 @@ sub modifyconfig { #{{{ $addfields->(); } - $section=$1; + $section=expandenv($1); push @out, $_; } @@ -897,9 +1224,9 @@ sub modifyconfig { #{{{ open(my $out, ">", $f) || die "mr: write $f: $!\n"; print $out @out; close $out; -} #}}} +} -sub dispatch { #{{{ +sub dispatch { my $action=shift; # actions that do not operate on all repos @@ -912,8 +1239,18 @@ sub dispatch { #{{{ elsif ($action eq 'register') { register(@ARGV); } + elsif ($action eq 'bootstrap') { + bootstrap(); + } + elsif ($action eq 'remember' || + $action eq 'offline' || + $action eq 'online') { + my @repos=selectrepos; + action($action, @{$repos[0]}) if @repos; + exit 0; + } - if ($jobs > 1) { + if (!$jobs || $jobs > 1) { mrs($action, selectrepos()); } else { @@ -921,13 +1258,13 @@ sub dispatch { #{{{ record($repo, action($action, @$repo)); } } -} #}}} +} -sub help { #{{{ +sub help { exec($config{''}{DEFAULT}{help}) || die "exec: $!"; -} #}}} - -sub config { #{{{ +} + +sub config { if (@_ < 2) { die "mr config: not enough parameters\n"; } @@ -963,10 +1300,15 @@ sub config { #{{{ } modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields; exit 0; -} #}}} +} -sub register { #{{{ - if (! $config_overridden) { +sub register { + if ($config_overridden) { + # Find the directory that the specified config file is + # located in. + ($directory)=abs_path($ENV{MR_CONFIG})=~/^(.*\/)[^\/]+$/; + } + else { # Find the closest known mrconfig file to the current # directory. $directory.="/" unless $directory=~/\/$/; @@ -1003,10 +1345,60 @@ sub register { #{{{ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); print "mr register: running >>$command<<\n" if $verbose; exec($command) || die "exec: $!"; -} #}}} +} + +sub bootstrap { + my $url=shift @ARGV; + my $dir=shift @ARGV || "."; + + if (! defined $url || ! length $url) { + die "mr: bootstrap requires url\n"; + } + + # Download the config file to a temporary location. + eval q{use File::Temp}; + die $@ if $@; + my $tmpconfig=File::Temp->new(); + my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); + push(@curlargs, "-k") if $insecure; + my $curlstatus = system(@curlargs); + die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60; + die "mr bootstrap: download of $url failed\n" if $curlstatus != 0; + + if (! -e $dir) { + system("mkdir", "-p", $dir); + } + chdir($dir) || die "chdir $dir: $!"; + + # Special case to handle checkout of the "." repo, which + # would normally be skipped. + my $topdir=abs_path(".")."/"; + my @repo=($topdir, $topdir, "."); + loadconfig($tmpconfig, $topdir); + record(\@repo, action("checkout", @repo, 1)) + if exists $config{$topdir}{"."}{"checkout"}; + + if (-e ".mrconfig") { + print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $url\n"; + } + else { + eval q{use File::Copy}; + die $@ if $@; + move($tmpconfig, ".mrconfig") || die "rename: $!"; + } + + # Reload the config file (in case we got a different version) + # and checkout everything else. + startingconfig(); + loadconfig(".mrconfig"); + dispatch("checkout"); + @skipped=grep { abs_path($_) ne abs_path($topdir) } @skipped; + showstats("bootstrap"); + exitstats(); +} # alias expansion and command stemming -sub expandaction { #{{{ +sub expandaction { my $action=shift; if (exists $alias{$action}) { $action=$alias{$action}; @@ -1027,32 +1419,53 @@ sub expandaction { #{{{ } } return $action; -} #}}} +} -sub getopts { #{{{ +sub find_nearest_mrconfig { + my $dir=getcwd(); + while (length $dir) { + if (-e "$dir/.mrconfig") { + return "$dir/.mrconfig"; + } + $dir=~s/\/[^\/]*$//; + } + die "no .mrconfig found in path\n"; +} + +sub getopts { + my @saved=@ARGV; Getopt::Long::Configure("bundling", "no_permute"); my $result=GetOptions( "d|directory=s" => sub { $directory=abs_path($_[1]) }, "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 }, + "p|path" => sub { $ENV{MR_CONFIG}=find_nearest_mrconfig(); $config_overridden=1 }, "v|verbose" => \$verbose, + "q|quiet" => \$quiet, "s|stats" => \$stats, - "n|no-recurse" => \$no_recurse, - "j|jobs=i" => \$jobs, + "k|insecure" => \$insecure, + "i|interactive" => \$interactive, + "n|no-recurse:i" => \$max_depth, + "j|jobs:i" => \$jobs, + "t|trust-all" => \$trust_all, ); if (! $result || @ARGV < 1) { - die("Usage: mr [-d directory] action [params ...]\n". + die("Usage: mr [options] action [params ...]\n". "(Use mr help for man page.)\n"); } -} #}}} + + $ENV{MR_SWITCHES}=""; + foreach my $option (@saved) { + last if $option eq $ARGV[0]; + $ENV{MR_SWITCHES}.="$option "; + } +} -sub init { #{{{ +sub init { $SIG{INT}=sub { print STDERR "mr: interrupted\n"; exit 2; }; - $ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig"; - # This can happen if it's run in a directory that was removed # or other strangeness. if (! defined $directory) { @@ -1069,19 +1482,9 @@ sub init { #{{{ use FindBin qw($Bin $Script); $ENV{MR_PATH}=$Bin."/".$Script; }; -} #}}} - -sub main { #{{{ - getopts(); - init(); - loadconfig(\*DATA); - loadconfig($ENV{MR_CONFIG}); - #use Data::Dumper; print Dumper(\%config); - - my $action=expandaction(shift @ARGV); - dispatch($action); - showstats($action); - +} + +sub exitstats { if (@failed) { exit 1; } @@ -1091,11 +1494,25 @@ sub main { #{{{ else { exit 0; } -} #}}} +} + +sub main { + getopts(); + init(); + + startingconfig(); + loadconfig($ENV{MR_CONFIG}); + #use Data::Dumper; print Dumper(\%config); + + my $action=expandaction(shift @ARGV); + dispatch($action); + + showstats($action); + exitstats(); +} # Finally, some useful actions that mr knows about by default. # These can be overridden in ~/.mrconfig. -#DATA{{{ __DATA__ [ALIAS] co = checkout @@ -1119,7 +1536,7 @@ lib = if [ -z "$1" ] || [ -z "$2" ]; then error "mr: usage: hours_since action num" fi - for dir in .git .svn .bzr CVS .hg _darcs; do + for dir in .git .svn .bzr CVS .hg _darcs _FOSSIL_; do if [ -e "$MR_REPO/$dir" ]; then flagfile="$MR_REPO/$dir/.mr_last$1" break @@ -1128,12 +1545,12 @@ lib = if [ -z "$flagfile" ]; then error "cannot determine flag filename" fi - delta=$(perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile") + delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"` if [ "$delta" -lt "$2" ]; then - exit 0 + return 1 else touch "$flagfile" - exit 1 + return 0 fi } @@ -1143,38 +1560,57 @@ bzr_test = test -d "$MR_REPO"/.bzr cvs_test = test -d "$MR_REPO"/CVS hg_test = test -d "$MR_REPO"/.hg darcs_test = test -d "$MR_REPO"/_darcs +fossil_test = test -f "$MR_REPO"/_FOSSIL_ git_bare_test = test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags && test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config && - test "$(GIT_CONFIG="$MR_REPO"/config git config --get core.bare)" = true + test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true svn_update = svn update "$@" -git_update = if [ "$@" ]; then git pull "$@"; else git pull -t origin master; fi -bzr_update = bzr merge "$@" +git_update = git pull "$@" +bzr_update = bzr merge --pull "$@" cvs_update = cvs update "$@" hg_update = hg pull "$@" && hg update "$@" darcs_update = darcs pull -a "$@" +fossil_update = fossil pull "$@" svn_status = svn status "$@" -git_status = git status "$@" || true -bzr_status = bzr status "$@" +git_status = git status -s "$@" || true +bzr_status = bzr status --short "$@" cvs_status = cvs status "$@" hg_status = hg status "$@" -darcs_status = darcs whatsnew -ls "$@" +darcs_status = darcs whatsnew -ls "$@" || true +fossil_status = fossil changes "$@" svn_commit = svn commit "$@" git_commit = git commit -a "$@" && git push --all bzr_commit = bzr commit "$@" && bzr push cvs_commit = cvs commit "$@" hg_commit = hg commit -m "$@" && hg push -darcs_commit = darcs commit -a -m "$@" && darcs push -a +darcs_commit = darcs record -a -m "$@" && darcs push -a +fossil_commit = fossil commit "$@" + +git_record = git commit -a "$@" +bzr_record = bzr commit "$@" +hg_record = hg commit -m "$@" +darcs_record = darcs record -a -m "$@" +fossil_record = fossil commit "$@" + +svn_push = : +git_push = git push "$@" +bzr_push = bzr push "$@" +cvs_push = : +hg_push = hg push "$@" +darcs_push = darcs push -a "$@" +fossil_push = fossil push "$@" svn_diff = svn diff "$@" git_diff = git diff "$@" bzr_diff = bzr diff "$@" cvs_diff = cvs diff "$@" hg_diff = hg diff "$@" -darcs_diff = darcs diff "$@" +darcs_diff = darcs diff -u "$@" +fossil_diff = fossil diff "$@" svn_log = svn log "$@" git_log = git log "$@" @@ -1183,63 +1619,119 @@ cvs_log = cvs log "$@" hg_log = hg log "$@" darcs_log = darcs changes "$@" git_bare_log = git log "$@" +fossil_log = fossil timeline "$@" svn_register = - url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2) + url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2` if [ -z "$url" ]; then error "cannot determine svn url" fi echo "Registering svn url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'" git_register = - url="$(LANG=C git config --get remote.origin.url)" || true + url="`LC_ALL=C git config --get remote.origin.url`" || true if [ -z "$url" ]; then error "cannot determine git url" fi echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'" bzr_register = - url=$(cat .bzr/branch/parent) + url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`" if [ -z "$url" ]; then error "cannot determine bzr url" fi echo "Registering bzr url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'" cvs_register = - repo=$(cat CVS/Repository) - root=$(cat CVS/Root) + repo=`cat CVS/Repository` + root=`cat CVS/Root` if [ -z "$root" ]; then error "cannot determine cvs root" fi echo "Registering cvs repository $repo at root $root" mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'" hg_register = - url=$(hg showconfig paths.default) + url=`hg showconfig paths.default` echo "Registering mercurial repo url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'" darcs_register = - url=$(cat _darcs/prefs/defaultrepo) + url=`cat _darcs/prefs/defaultrepo` echo "Registering darcs repository $url in $MR_CONFIG" - mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url'p '$MR_REPO'" + mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url' '$MR_REPO'" git_bare_register = - url="$(LANG=C GIT_CONFIG=config git config --get remote.origin.url)" || true + url="`LC_ALL=C GIT_CONFIG=config git config --get remote.origin.url`" || true if [ -z "$url" ]; then error "cannot determine git url" fi echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'" +fossil_register = + url=`fossil remote-url` + repo=`fossil info | grep repository | sed -e s/repository:*.//g -e s/\ //g` + echo "Registering fossil repository $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'" + +svn_trusted_checkout = svn co $url $repo +svn_alt_trusted_checkout = svn checkout $url $repo +git_trusted_checkout = git clone $url $repo +bzr_trusted_checkout = bzr clone $url $repo +# cvs: too hard +hg_trusted_checkout = hg clone $url $repo +darcs_trusted_checkout = darcs get $url $repo +git_bare_trusted_checkout = git clone --bare $url $repo +# fossil: messy to do + help = + case `uname -s` in + SunOS) + SHOWMANFILE="man -f" + ;; + Darwin) + SHOWMANFILE="man" + ;; + *) + SHOWMANFILE="man -l" + ;; + esac if [ ! -e "$MR_PATH" ]; then error "cannot find program path" fi - (pod2man -c mr "$MR_PATH" | man -l -) || error "pod2man or man failed" + tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed" + trap "rm -f $tmp" exit + pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed" + $SHOWMANFILE "$tmp" || error "man failed" list = true config = +bootstrap = + +online = + if [ -s ~/.mrlog ]; then + info "running offline commands" + mv -f ~/.mrlog ~/.mrlog.old + if ! sh -e ~/.mrlog.old; then + error "offline command failed; left in ~/.mrlog.old" + fi + rm -f ~/.mrlog.old + else + info "no offline commands to run" + fi +offline = + umask 077 + touch ~/.mrlog + info "offline mode enabled" +remember = + info "remembering command: 'mr $@'" + command="mr -d '$(pwd)' $MR_SWITCHES" + for w in "$@"; do + command="$command '$w'" + done + if [ ! -e ~/.mrlog ] || ! grep -q -F "$command" ~/.mrlog; then + echo "$command" >> ~/.mrlog + fi ed = echo "A horse is a horse, of course, of course.." T = echo "I pity the fool." right = echo "Not found." -#}}} # vim:sw=8:sts=0:ts=8:noet