X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/69cba0fdcf854e9ea567654c0b38e91b21226c88..9107e4f2a67ca7f56ced7240bedaf90d479a85a0:/mr?ds=inline

diff --git a/mr b/mr
index 0f80fc8..f769eff 100755
--- a/mr
+++ b/mr
@@ -12,7 +12,7 @@ B<mr> [options] update
 
 B<mr> [options] status
 
-B<mr> [options] commit -m "message"
+B<mr> [options] commit [-m "message"]
 
 B<mr> [options] action [params ...]
 
@@ -23,7 +23,41 @@ set of repositories in a .mrconfig file, and then checkout, update, or
 perform other actions on all of the repositories at once.
 
 Any mix of revision control systems can be used with B<mr>, and you can
-define arbitrary actions like "update", "checkout", or "commit".
+define arbitrary actions for commands like "update", "checkout", or "commit".
+
+The predefined commands should be fairly familiar to users of any revision
+control system:
+
+=over 4
+
+=item checkout
+
+Checks out all the registered repositories that are not already checked
+out.
+
+=item update
+
+Updates each registered repository from its configured remote repository.
+
+If a repository isn't checked out yet, it will first check it out.
+
+=item status
+
+Displays a status report for each registered repository, showing what
+uncommitted changes are present in the repository.
+
+=item commit
+
+Commits changes to each registered repository. (By default, changes
+are pushed to the remote repository too, when using distributed systems
+like git.)
+
+The optional -m parameter allows specifying a commit message.
+
+=back
+
+Actions can be abbreviated to any unambiguous subsctring, so
+"mr st" is equivilant to "mr status".
 
 =head1 OPTIONS
 
@@ -48,9 +82,10 @@ Be verbose.
 
 =head1 FILES
 
-B<mr> is configured by .mrconfig files. It searches for .mrconfig files in
-your home directory, and in the root directory of each repository specified
-in a .mrconfig file. So you could have a ~/.mrconfig that registers a
+B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
+file in your home directory. Each repository specified in a .mrconfig file
+can also have its own .mrconfig file in its root directory that can
+optionally be used as well. So you could have a ~/.mrconfig that registers a
 repository ~/src, that itself contains a ~/src/.mrconfig file, that in turn
 registers several additional repositories.
 
@@ -61,12 +96,16 @@ directory that contains the .mrconfig file.
 
 Within a section, each parameter defines a shell command to run to handle a
 given action. Note that these shell commands are run in a "set -e" shell
-environment, and B<mr> cds into the repository directory before running
-them, except for the "checkout" command, which is run in the parent of the
-repository directory, since the repository isn't checked out yet.
+environment, where any additional parameters you pass are available in
+"$@". B<mr> cds into the repository directory before running
+a command, except for the "checkout" command, which is run in the parent
+of the repository directory, since the repository isn't checked out yet.
 
 There are two special parameters. If the "skip" parameter is set and
 its command returns nonzero, then B<mr> will skip acting on that repository.
+If the "chain" parameter is set and its command returns nonzero, then B<mr>
+will try to load a .mrconfig file from the root of the repository. (You
+should avoid chaining from repositories with untrusted committers.)
 
 The "default" section allows setting up default handlers for each action,
 and is overridden by the contents of other sections. mr contains default
@@ -77,6 +116,7 @@ For example:
 
   [src]
   checkout = svn co svn://svn.example.com/src/trunk src
+  chain = true
 
   [src/linux-2.6]
   # only check this out on kodama
@@ -102,6 +142,7 @@ my $directory=getcwd();
 my $config="$ENV{HOME}/.mrconfig";
 my $verbose=0;
 my %config;
+my %knownactions;
 
 Getopt::Long::Configure("no_permute");
 my $result=GetOptions(
@@ -112,14 +153,24 @@ my $result=GetOptions(
 if (! $result || @ARGV < 1) {
 	die("Usage: mr [-d directory] action [params ...]\n");
 }
-my $action=shift @ARGV;
 
 loadconfig(\*DATA);
 loadconfig($config);
 #use Data::Dumper;
 #print Dumper(\%config);
 
-my (@failures, @successes, @skipped);
+my $action=shift @ARGV;
+if (! $knownactions{$action}) {
+	my @matches = grep { /^\Q$action\E/ } keys %knownactions;
+	if (@matches == 1) {
+		$action=$matches[0];
+	}
+	else {
+		die "mr: ambiguous action \"$action\" (matches @matches)\n";
+	}
+}
+
+my (@failed, @successful, @skipped);
 my $first=1;
 foreach my $topdir (sort keys %config) {
 	foreach my $subdir (sort keys %{$config{$topdir}}) {
@@ -128,6 +179,7 @@ foreach my $topdir (sort keys %config) {
 		my $dir=$topdir.$subdir;
 
 		if (defined $directory &&
+		    $dir ne $directory &&
 		    $dir !~ /^\Q$directory\E\//) {
 			print "mr $action: $dir skipped per -d parameter ($directory)\n" if $verbose;
 			push @skipped, $dir;
@@ -146,40 +198,54 @@ foreach my $topdir (sort keys %config) {
 			}
 		}
 
-		if ($action eq 'checkout') {
-			if (-e $dir) {
-				print "mr $action: $dir already exists, skipping checkout\n";
-				push @skipped, $dir;
-				next;
-			}
-			$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
-		}
-		if (! chdir($dir)) {
-			print STDERR "mr $action: failed to chdir to $dir: $!\n";
+		action($action, $dir, $topdir, $subdir);
+
+	}
+}
+
+sub action {
+	my ($action, $dir, $topdir, $subdir) = @_;
+
+	if ($action eq 'checkout') {
+		if (-d $dir) {
+			print "mr $action: $dir already exists, skipping checkout\n";
 			push @skipped, $dir;
+			return;
 		}
-		elsif (! exists $config{$topdir}{$subdir}{$action}) {
-			print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
-			push @skipped, $dir;
+		$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
+	}
+	if ($action eq 'update') {
+		if (! -d $dir) {
+			return action("checkout", $dir, $topdir, $subdir);
 		}
-		else {
-			print "mr $action: in $dir\n";
-			my $command="set -e; my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action @ARGV";
-			my $ret=system($command);
-			if ($ret != 0) {
-				print STDERR "mr $action: failed to run: $command\n" if $verbose;
-				push @failures, $topdir.$subdir;
-				if ($ret >> 8 != 0) {
-					print STDERR "mr $action: command failed\n";
-				}
-				elsif ($ret != 0) {
-					print STDERR "mr $action: command died ($ret)\n";
-				}
+	}
+
+	if (! chdir($dir)) {
+		print STDERR "mr $action: failed to chdir to $dir: $!\n";
+		push @skipped, $dir;
+	}
+	elsif (! exists $config{$topdir}{$subdir}{$action}) {
+		print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
+		push @skipped, $dir;
+	}
+	else {
+		print "mr $action: in $dir\n";
+		my $command="set -e; my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
+			join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+		my $ret=system($command);
+		if ($ret != 0) {
+			print STDERR "mr $action: failed to run: $command\n" if $verbose;
+			push @failed, $topdir.$subdir;
+			if ($ret >> 8 != 0) {
+				print STDERR "mr $action: command failed\n";
 			}
-			else {
-				push @successes, $dir;
+			elsif ($ret != 0) {
+				print STDERR "mr $action: command died ($ret)\n";
 			}
 		}
+		else {
+			push @successful, $dir;
+		}
 	}
 }
 
@@ -193,11 +259,17 @@ sub showstat {
 	return;
 }
 print "\nmr $action: finished (".join("; ",
-	showstat($#successes+1, "success", "sucesses"),
-	showstat($#failures+1, "failure", "failures"),
+	showstat($#successful+1, "successful", "successful"),
+	showstat($#failed+1, "failed", "failed"),
 	showstat($#skipped+1, "skipped", "skipped"),
 ).")\n";
-exit @failures ? 1 : 0;
+if (@failed) {
+	exit 1;
+}
+elsif (! @successful && @skipped) {
+	exit 1;
+}
+exit 0;
 
 my %loaded;
 sub loadconfig {
@@ -222,6 +294,9 @@ sub loadconfig {
 		print "mr: loading config $f\n" if $verbose;
 		open($in, "<", $f) || die "mr: open $f: $!\n";
 		($dir)=$f=~/^(.*\/)[^\/]+$/;
+		if (! defined $dir) {
+			$dir=".";
+		}
 		$dir=abs_path($dir)."/";
 
 		# copy in defaults from first parent
@@ -241,10 +316,6 @@ sub loadconfig {
 		next if /^\s*\#/ || /^\s*$/;
 		if (/^\s*\[([^\]]*)\]\s*$/) {
 			$section=$1;
-			if (length $dir && $section ne "default" &&
-			    -e $dir.$section."/.mrconfig") {
-				push @toload, $dir.$section."/.mrconfig";
-		        }
 		}
 		elsif (/^\s*(\w+)\s*=\s*(.*)/) {
 			my $parameter=$1;
@@ -265,6 +336,14 @@ sub loadconfig {
 				$config{$dir}{$section}={ %{$config{$dir}{default}} };
 			}
 			$config{$dir}{$section}{$parameter}=$value;
+			$knownactions{$parameter}=1;
+
+			if ($parameter eq 'chain' &&
+			    length $dir && $section ne "default" &&
+			    -e $dir.$section."/.mrconfig" &&
+		    	    system($value) >> 8 == 0) {
+				push @toload, $dir.$section."/.mrconfig";
+		        }
 		}
 		else {
 				die "$f line $.: parse error\n";
@@ -287,7 +366,7 @@ update = \
 	elif [ -d .git ]; then \
 		git pull origin master; \
 	else \
-		echo "mr update: unknown RCS"; \
+		echo "mr update: unknown repo type"; \
 		exit 1; \
 	fi
 status = \
@@ -296,15 +375,15 @@ status = \
 	elif [ -d .git ]; then \
 		git status || true; \
 	else \
-		echo "mr status: unknown RCS"; \
+		echo "mr status: unknown repo type"; \
 		exit 1; \
 	fi
 commit = \
 	if [ -d .svn ]; then \
 		svn commit "$@"; \
 	elif [ -d .git ]; then \
-		git commit -a "$@"; \
+		git commit -a "$@" && git push --all; \
 	else \
-		echo "mr commit: unknown RCS"; \
+		echo "mr commit: unknown repo type"; \
 		exit 1; \
 	fi