X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/89d68dbad8ce10ea3844d95565d121ba23bf5875..9af9dee7005d509c835876e75c711455cce23d8d:/mr?ds=sidebyside

diff --git a/mr b/mr
index 80ccc78..65b0b1d 100755
--- a/mr
+++ b/mr
@@ -22,17 +22,17 @@ B<mr> [options] log
 
 B<mr> [options] register [repository]
 
-B<mr> [options] config section [parameter=[value] ...]
+B<mr> [options] config section ["parameter=[value]" ...]
 
 B<mr> [options] action [params ...]
 
 =head1 DESCRIPTION
 
-B<mr> is a Multiple Repository management tool. It
-can checkout, update, or perform other actions on
-a set of repositories as if they were one combined respository. It
-supports any combination of subversion, git, cvs, and bzr repositories, 
-and support for other revision control systems can easily be added.
+B<mr> is a Multiple Repository management tool. It can checkout, update, or
+perform other actions on a set of repositories as if they were one combined
+respository. It supports any combination of subversion, git, cvs, mecurial and
+bzr repositories, and support for other revision control systems can easily be
+added.
 
 B<mr> cds into and operates on all registered repositories at or below your
 working directory. Or, if you are in a subdirectory of a repository that
@@ -108,6 +108,10 @@ To show the command that mr uses to update the repository in src/foo:
 
   mr config src/foo update
 
+To see the built-in library of shell functions contained in mr:
+
+  mr config DEFAULT lib
+
 The ~/.mrconfig file is used by default. To use a different config file,
 use the -c option.
 
@@ -188,9 +192,9 @@ that contains the mrconfig file, but you can also choose to use absolute
 paths.
 
 Within a section, each parameter defines a shell command to run to handle a
-given action. mr contains default handlers for the "update", "status", and
-"commit" actions, so normally you only need to specify what to do for
-"checkout".
+given action. mr contains default handlers for "update", "status",
+"commit", and other standard actions. Normally you only need to specify what
+to do for "checkout".
 
 Note that these shell commands are run in a "set -e" shell
 environment, where any additional parameters you pass are available in
@@ -227,14 +231,6 @@ If the "chain" parameter is set and its command returns true, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
-=item deleted
-
-If the "deleted" parameter is set and its command returns true, then
-B<mr> will treat the repository as deleted. It won't ever actually delete
-the repository, but it will warn if it sees the repository's directory.
-This is useful when one mrconfig file is shared amoung multiple machines,
-to keep track of and remember to delete old repositories.
-
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
@@ -358,6 +354,7 @@ elsif ($action eq 'config') {
 				    exists $config{$topdir}{$section}{$_}) {
 					print $config{$topdir}{$section}{$_}."\n";
 					$found=1;
+					last if $section eq 'DEFAULT';
 				}
 			}
 			if (! $found) {
@@ -433,33 +430,6 @@ sub action { #{{{
 	my $lib=exists $config{$topdir}{$subdir}{lib} ?
 	               $config{$topdir}{$subdir}{lib}."\n" : "";
 
-	if (exists $config{$topdir}{$subdir}{deleted}) {
-		my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
-		print "mr $action: running deleted test >>$test<<\n" if $verbose;
-		my $ret=system($test);
-		if ($ret != 0) {
-			if (($? & 127) == 2) {
-				print STDERR "mr $action: interrupted\n";
-				exit 2;
-			}
-			elsif ($? & 127) {
-				print STDERR "mr $action: deleted test received signal ".($? & 127)."\n";
-			}
-		}
-		if ($ret >> 8 == 0) {
-			if (-d $dir) {
-				print STDERR "mr error: $dir should be deleted yet still exists\n\n";
-				push @failed, $dir;
-				return;
-			}
-			else {
-				print "mr $action: $dir skipped (as deleted) per config file\n" if $verbose;
-				push @skipped, $dir;
-				return;
-			}
-		}
-	}
-
 	if ($action eq 'checkout') {
 		if (-d $dir) {
 			print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
@@ -822,7 +792,7 @@ lib =
 		exit 1
 	}
 	hours_since() {
-		for dir in .git .svn .bzr CVS; do
+		for dir in .git .svn .bzr CVS .hg; do
 			if [ -e "$MR_REPO/$dir" ]; then
 				flagfile="$MR_REPO/$dir/.mr_last$1"
 				break
@@ -839,11 +809,17 @@ update =
 	if [ -d "$MR_REPO"/.svn ]; then
 		svn update "$@"
 	elif [ -d "$MR_REPO"/.git ]; then
-		git pull origin master "$@"
+		if [ -z "$@" ]; then
+			git pull -t origin master
+		else
+			git pull "$@"
+		fi
 	elif [ -d "$MR_REPO"/.bzr ]; then
 		bzr merge "$@"
 	elif [ -d "$MR_REPO"/CVS ]; then
 		cvs update "$@"
+	elif [ -d "$MR_REPO"/.hg ]; then
+		hg pull "$@" && hg update "$@"
 	else
 		error "unknown repo type"
 	fi
@@ -856,6 +832,8 @@ status =
 		bzr status "$@"
 	elif [ -d "$MR_REPO"/CVS ]; then
 		cvs status "$@"
+	elif [ -d "$MR_REPO"/.hg ]; then
+		hg status "$@"
 	else
 		error "unknown repo type"
 	fi
@@ -868,6 +846,8 @@ commit =
 		bzr commit "$@" && bzr push
 	elif [ -d "$MR_REPO"/CVS ]; then
 		cvs commit "$@"
+	elif [ -d "$MR_REPO"/.hg ]; then
+		hg commit -m "$@" && hg push
 	else
 		error "unknown repo type"
 	fi
@@ -880,6 +860,8 @@ diff =
 		bzr diff "$@"
 	elif [ -d "$MR_REPO"/CVS ]; then
 		cvs diff "$@"
+	elif [ -d "$MR_REPO"/.hg ]; then
+		hg diff "$@"
 	else
 		error "unknown repo type"
 	fi
@@ -892,6 +874,8 @@ log =
 		bzr log "$@"
 	elif [ -d "$MR_REPO"/CVS ]; then
 		cvs log "$@"
+	elif [ -d "$MR_REPO"/.hg ]; then
+		hg log "$@"
 	else
 		error "unknown repo type"
 	fi
@@ -930,6 +914,11 @@ register =
 		echo "Registering cvs repository $repo at root $root"
 		mr -c "$MR_CONFIG" config "$(pwd)" \
 			checkout="cvs -d '$root' co -d $basedir $repo"
+	elif [ -d .hg ]; then
+		url=$(hg showconfig paths.default)
+		echo "Registering mercurial repo url: $url in $MR_CONFIG"
+		mr -c "$MR_CONFIG" config "$(pwd)" \
+			checkout="hg clone $url $basedir"
 	else
 		error "unable to register this repo type"
 	fi