X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/8e2f0e9b26f076d144fe5ff9e657f477db648db3..92842b91c27593c122fc53d5d7fa6c162d303b8a:/mr?ds=inline diff --git a/mr b/mr index d4622d9..48c355c 100755 --- a/mr +++ b/mr @@ -1,7 +1,5 @@ #!/usr/bin/perl -#man{{{ - =head1 NAME mr - a Multiple Repository management tool @@ -18,29 +16,45 @@ B [options] commit [-m "message"] B [options] record [-m "message"] +B [options] push + B [options] diff B [options] log +B [options] run command [param ...] + +B [options] bootstrap url [directory] + B [options] register [repository] B [options] config section ["parameter=[value]" ...] B [options] action [params ...] +B [options] [online|offline] + +B [options] remember action [params ...] + =head1 DESCRIPTION B is a Multiple Repository management tool. It can checkout, update, or perform other actions on a set of repositories as if they were one combined -repository. It supports any combination of subversion, git, cvs, mecurial, -bzr and darcs repositories, and support for other revision control systems can -easily be added. +repository. It supports any combination of subversion, git, cvs, mercurial, +bzr, darcs and fossil repositories, and support for other revision +control systems can easily be added. B cds into and operates on all registered repositories at or below your working directory. Or, if you are in a subdirectory of a repository that contains no other registered repositories, it will stay in that directory, and work on only that repository, +B is configured by .mrconfig files, which list the repositories. It +starts by reading the .mrconfig file in your home directory, and this can +in turn chain load .mrconfig files from repositories. It also automatically +looks for a .mrconfig file in the current directory, or in one of its +parent directories. + These predefined commands should be fairly familiar to users of any revision control system: @@ -77,6 +91,11 @@ remote repository. Only supported for distributed revision control systems. The optional -m parameter allows specifying a commit message. +=item push + +Pushes committed local changes to the remote repository. A no-op for +centralized revision control systems. + =item diff Show a diff of uncommitted changes. @@ -85,12 +104,27 @@ Show a diff of uncommitted changes. Show the commit log. +=item run command [param ...] + +Runs the specified command in each repository. + =back These commands are also available: =over 4 +=item bootstrap url [directory] + +Causes mr to download the url, and use it as a .mrconfig file +to checkout the repositories listed in it, into the specified directory. + +The directory will be created if it does not exist. If no directory is +specified, the current directory will be used. + +If the .mrconfig file includes a repository named ".", that +is checked out into the top of the specified directory. + =item list (or ls) List the repositories that mr will act on. @@ -102,7 +136,7 @@ repository in the current directory is registered, or you can specify a directory to register. The mrconfig file that is modified is chosen by either the -c option, or by -looking for the closest known one at or below the current directory. +looking for the closest known one at or in a parent of the current directory. =item config @@ -123,8 +157,26 @@ To see the built-in library of shell functions contained in mr: mr config DEFAULT lib -The ~/.mrconfig file is used by default. To use a different config file, -use the -c option. +The mrconfig file that is used is chosen by either the -c option, or by +looking for the closest known one at or in a parent of the current directory. + +=item offline + +Advises mr that it is in offline mode. Any commands that fail in +offline mode will be remembered, and retried when mr is told it's online. + +=item online + +Advices mr that it is in online mode again. Commands that failed while in +offline mode will be re-run. + +=item remember + +Remember a command, to be run later when mr re-enters online mode. This +implicitly puts mr into offline mode. The command can be any regular mr +command. This is useful when you know that a command will fail due to being +offline, and so don't want to run it right now at all, but just remember +to run it when you go back online. =item help @@ -147,34 +199,56 @@ system. =item -d directory +=item --directory directory + Specifies the topmost directory that B should work in. The default is the current working directory. =item -c mrconfig -Use the specified mrconfig file. The default is B<~/.mrconfig> +=item --config mrconfig + +Use the specified mrconfig file. The default is to use both B<~/.mrconfig> +as well as look for a .mrconfig file in the current directory, or in one +of its parent directories. =item -v +=item --verbose + Be verbose. =item -q +=item --quiet + Be quiet. +=item -k + +=item --insecure + +Accept untrusted SSL certificates when bootstrapping. + =item -s +=item --stats + Expand the statistics line displayed at the end to include information about exactly which repositories failed and were skipped, if any. =item -i +=item --interactive + Interactive mode. If a repository fails to be processed, a subshell will be started which you can use to resolve or investigate the problem. Exit the subshell to continue the mr run. =item -n [number] +=item --no-recurse [number] + If no number if specified, just operate on the repository for the current directory, do not recurse into deeper repositories. @@ -184,21 +258,32 @@ but not ./src/packages/bar. =item -j [number] +=item --jobs [number] + Run the specified number of jobs in parallel, or an unlimited number of jobs with no number specified. This can greatly speed up operations such as updates. It is not recommended for interactive operations. Note that running more than 10 jobs at a time is likely to run afoul of -ssh connection limits. Running between 3 and 5 jobs at a time will yeild +ssh connection limits. Running between 3 and 5 jobs at a time will yield a good speedup in updates without loading the machine too much. -=back +=item -t + +=item --trust-all + +Trust all mrconfig files even if they are not listed in ~/.mrtrust. +Use with caution. + +=item -p -=head1 FILES +=item --path -B is configured by .mrconfig files. It starts by reading the .mrconfig -file in your home directory, and this can in turn chain load .mrconfig files -from repositories. +This obsolete flag is ignored. + +=back + +=head1 MRCONFIG FILES Here is an example .mrconfig file: @@ -224,7 +309,9 @@ is an alias, and its value is the action to use. All other sections add repositories. The section header specifies the directory where the repository is located. This is relative to the directory that contains the mrconfig file, but you can also choose to use absolute -paths. +paths. (Note that you can use environment variables in section names; they +will be passed through the shell for expansion. For example, +"[$HOSTNAME]", or "[${HOSTNAME}foo]") Within a section, each parameter defines a shell command to run to handle a given action. mr contains default handlers for "update", "status", @@ -277,8 +364,7 @@ repository, ordering it to be processed earlier is not recommended. =item chain If the "chain" parameter is set and its command returns true, then B -will try to load a .mrconfig file from the root of the repository. (You -should avoid chaining from repositories with untrusted committers.) +will try to load a .mrconfig file from the root of the repository. =item include @@ -295,6 +381,20 @@ The "lib" parameter can specify some shell code that will be run before each command, this can be a useful way to define shell functions for other commands to use. +=item fixups + +If the "fixups" parameter is set, its command is run whenever a repository +is checked out, or updated. This provides an easy way to do things +like permissions fixups, or other tweaks to the repository content, +whenever the repository is changed. + +=item pre_ and post_ + +If a "pre_action" parameter is set, its command is run before mr performs the +specified action. Similarly, "post_action" parameters are run after mr +successfully performs the specified action. For example, "pre_commit" is +run before committing; "post_update" is run after updating. + =back When looking for a command to run for a given action, mr first looks for @@ -309,9 +409,42 @@ the action that is performed for a given revision control system, you can override these rcs specific actions. To add a new revision control system, you can just add rcs specific actions for it. +=head1 UNTRUSTED MRCONFIG FILES + +Since mrconfig files can contain arbitrary shell commands, they can do +anything. This flexibility is good, but it also allows a malicious mrconfig +file to delete your whole home directory. Such a file might be contained +inside a repository that your main ~/.mrconfig checks out. To +avoid worries about evil commands in a mrconfig file, mr defaults to +reading all mrconfig files other than the main ~/.mrconfig in untrusted +mode. In untrusted mode, mrconfig files are limited to running only known +safe commands (like "git clone") in a carefully checked manner. + +To configure mr to trust other mrconfig files, list them in ~/.mrtrust. +One mrconfig file should be listed per line. Either the full pathname +should be listed, or the pathname can start with "~/" to specify a file +relative to your home directory. + +=head1 OFFLINE LOG FILE + +The ~/.mrlog file contains commands that mr has remembered to run later, +due to being offline. You can delete or edit this file to remove commands, +or even to add other commands for 'mr online' to run. If the file is +present, mr assumes it is in offline mode. + +=head1 EXTENSIONS + +mr can be extended to support things such as unison and git-svn. Some +files providing such extensions are available in /usr/share/mr/. See +the documentation in the files for details about using them. + +=head1 EXIT STATUS + +mr returns nonzero if a command failed in any of the repositories. + =head1 AUTHOR -Copyright 2007 Joey Hess +Copyright 2007-2011 Joey Hess Licensed under the GNU GPL version 2 or higher. @@ -319,8 +452,6 @@ http://kitenet.net/~joey/code/mr/ =cut -#}}} - use warnings; use strict; use Getopt::Long; @@ -339,12 +470,15 @@ my $config_overridden=0; my $verbose=0; my $quiet=0; my $stats=0; +my $insecure=0; my $interactive=0; my $max_depth; my $no_chdir=0; my $jobs=1; +my $trust_all=0; my $directory=getcwd(); -$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig"; + +$ENV{MR_CONFIG}=find_mrconfig(); # globals :-( my %config; @@ -356,7 +490,7 @@ my (@ok, @failed, @skipped); main(); my %rcs; -sub rcs_test { #{{{ +sub rcs_test { my ($action, $dir, $topdir, $subdir) = @_; if (exists $rcs{$dir}) { @@ -382,7 +516,7 @@ sub rcs_test { #{{{ chomp $rcs; if ($rcs=~/\n/s) { $rcs=~s/\n/, /g; - print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n"; + print STDERR "mr $action: found multiple possible repository types ($rcs) for ".fulldir($topdir, $subdir)."\n"; return undef; } if (! length $rcs) { @@ -391,9 +525,9 @@ sub rcs_test { #{{{ else { return $rcs{$dir}=$rcs; } -} #}}} +} -sub findcommand { #{{{ +sub findcommand { my ($action, $dir, $topdir, $subdir, $is_checkout) = @_; if (exists $config{$topdir}{$subdir}{$action}) { @@ -413,32 +547,41 @@ sub findcommand { #{{{ else { return undef; } -} #}}} +} -sub action { #{{{ - my ($action, $dir, $topdir, $subdir) = @_; +sub fulldir { + my ($topdir, $subdir) = @_; + return $subdir =~ /^\// ? $subdir : $topdir.$subdir; +} + +sub action { + my ($action, $dir, $topdir, $subdir, $force_checkout) = @_; + my $fulldir=fulldir($topdir, $subdir); $ENV{MR_CONFIG}=$configfiles{$topdir}; my $lib=exists $config{$topdir}{$subdir}{lib} ? $config{$topdir}{$subdir}{lib}."\n" : ""; my $is_checkout=($action eq 'checkout'); + my $is_update=($action =~ /update/); + + $ENV{MR_REPO}=$dir; if ($is_checkout) { - if (-d $dir) { - print "mr $action: $dir already exists, skipping checkout\n" if $verbose; - return SKIPPED; + if (! $force_checkout) { + if (-d $dir) { + print "mr $action: $dir already exists, skipping checkout\n" if $verbose; + return SKIPPED; + } + + $dir=~s/^(.*)\/[^\/]+\/?$/$1/; } - - $dir=~s/^(.*)\/[^\/]+\/?$/$1/; } - elsif ($action =~ /update/) { + elsif ($is_update) { if (! -d $dir) { return action("checkout", $dir, $topdir, $subdir); } } - $ENV{MR_REPO}=$dir; - my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout); my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout); @@ -475,23 +618,27 @@ sub action { #{{{ elsif (! defined $command) { my $rcs=rcs_test(@_); if (! defined $rcs) { - print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n"; + print STDERR "mr $action: unknown repository type and no defined $action command for $fulldir\n"; return FAILED; } else { - print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n"; + print STDERR "mr $action: no defined action for $rcs repository $fulldir, skipping\n"; return SKIPPED; } } else { if (! $no_chdir) { - print "mr $action: $topdir$subdir\n" unless $quiet; + print "mr $action: $fulldir\n" unless $quiet; } else { my $s=$directory; - $s=~s/^\Q$topdir$subdir\E\/?//; - print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet; + $s=~s/^\Q$fulldir\E\/?//; + print "mr $action: $fulldir (in subdir $s)\n" unless $quiet; } + + my $hookret=hook("pre_$action", $topdir, $subdir); + return $hookret if $hookret != OK; + $command="set -e; ".$lib. "my_action(){ $command\n }; my_action ". join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); @@ -509,6 +656,14 @@ sub action { #{{{ print STDERR "mr $action: failed ($ret)\n" if $verbose; if ($ret >> 8 != 0) { print STDERR "mr $action: command failed\n"; + if (-e "$ENV{HOME}/.mrlog" && $action ne 'remember') { + # recreate original command line to + # remember, and avoid recursing + my @orig=@ARGV; + @ARGV=('-n', $action, @orig); + action("remember", $dir, $topdir, $subdir); + @ARGV=@orig; + } } elsif ($ret != 0) { print STDERR "mr $action: command died ($ret)\n"; @@ -516,18 +671,51 @@ sub action { #{{{ return FAILED; } else { - if ($action eq 'checkout' && ! -d $dir) { + if ($is_checkout && ! -d $dir) { print STDERR "mr $action: $dir missing after checkout\n";; return FAILED; } + my $ret=hook("post_$action", $topdir, $subdir); + return $ret if $ret != OK; + + if (($is_checkout || $is_update)) { + my $ret=hook("fixups", $topdir, $subdir); + return $ret if $ret != OK; + } + return OK; } } -} #}}} +} + +sub hook { + my ($hook, $topdir, $subdir) = @_; + + my $command=$config{$topdir}{$subdir}{$hook}; + return OK unless defined $command; + my $lib=exists $config{$topdir}{$subdir}{lib} ? + $config{$topdir}{$subdir}{lib}."\n" : ""; + my $shell="set -e;".$lib. + "my_hook(){ $command\n }; my_hook"; + print "mr $hook: running >>$shell<<\n" if $verbose; + my $ret=system($shell); + if ($ret != 0) { + if (($? & 127) == 2) { + print STDERR "mr $hook: interrupted\n"; + return ABORT; + } + elsif ($? & 127) { + print STDERR "mr $hook: received signal ".($? & 127)."\n"; + return ABORT; + } + } + + return OK; +} # run actions on multiple repos, in parallel -sub mrs { #{{{ +sub mrs { my $action=shift; my @repos=@_; @@ -594,24 +782,24 @@ sub mrs { #{{{ } } } -} #}}} +} -sub record { #{{{ +sub record { my $dir=shift()->[0]; my $ret=shift; if ($ret == OK) { push @ok, $dir; - print "\n"; + print "\n" unless $quiet; } elsif ($ret == FAILED) { if ($interactive) { chdir($dir) unless $no_chdir; print STDERR "mr: Starting interactive shell. Exit shell to continue.\n"; - system((getpwuid($<))[8]); + system((getpwuid($<))[8], "-i"); } push @failed, $dir; - print "\n"; + print "\n" unless $quiet; } elsif ($ret == SKIPPED) { push @skipped, $dir; @@ -622,9 +810,9 @@ sub record { #{{{ else { die "unknown exit status $ret"; } -} #}}} +} -sub showstats { #{{{ +sub showstats { my $action=shift; if (! @ok && ! @failed && ! @skipped) { die "mr $action: no repositories found to work on\n"; @@ -642,9 +830,9 @@ sub showstats { #{{{ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n"; } } -} #}}} +} -sub showstat { #{{{ +sub showstat { my $count=shift; my $singular=shift; my $plural=shift; @@ -652,10 +840,10 @@ sub showstat { #{{{ return "$count ".($count > 1 ? $plural : $singular); } return; -} #}}} +} # an ordered list of repos -sub repolist { #{{{ +sub repolist { my @list; foreach my $topdir (sort keys %config) { foreach my $subdir (sort keys %{$config{$topdir}}) { @@ -673,17 +861,26 @@ sub repolist { #{{{ || $a->{subdir} cmp $b->{subdir} } @list; -} #}}} +} + +sub repodir { + my $repo=shift; + my $topdir=$repo->{topdir}; + my $subdir=$repo->{subdir}; + my $ret=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + $ret=~s/\/\.$//; + return $ret; +} # figure out which repos to act on -sub selectrepos { #{{{ +sub selectrepos { my @repos; foreach my $repo (repolist()) { my $topdir=$repo->{topdir}; my $subdir=$repo->{subdir}; next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $dir=repodir($repo); my $d=$directory; $dir.="/" unless $dir=~/\/$/; $d.="/" unless $d=~/\/$/; @@ -703,7 +900,7 @@ sub selectrepos { #{{{ my $subdir=$repo->{subdir}; next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $dir=repodir($repo); my $d=$directory; $dir.="/" unless $dir=~/\/$/; $d.="/" unless $d=~/\/$/; @@ -715,19 +912,142 @@ sub selectrepos { #{{{ $no_chdir=1; } return @repos; -} #}}} +} + +sub expandenv { + my $val=shift; + + + if ($val=~/\$/) { + $val=`echo "$val"`; + chomp $val; + } + + return $val; +} + +my %trusted; +sub is_trusted_config { + my $config=shift; # must be abs_pathed already + + # We always trust ~/.mrconfig. + return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig"); + + return 1 if $trust_all; + + my $trustfile=$ENV{HOME}."/.mrtrust"; + + if (! %trusted) { + $trusted{"$ENV{HOME}/.mrconfig"}=1; + if (open (TRUST, "<", $trustfile)) { + while () { + chomp; + s/^~\//$ENV{HOME}\//; + $trusted{abs_path($_)}=1; + } + close TRUST; + } + } + + return $trusted{$config}; +} + + +sub is_trusted_repo { + my $repo=shift; + + # Tightly limit what is allowed in a repo name. + # No ../, no absolute paths, and no unusual filenames + # that might try to escape to the shell. + return $repo =~ /^[-_.+\/A-Za-z0-9]+$/ && + $repo !~ /\.\./ && $repo !~ /^\//; +} + +sub is_trusted_checkout { + my $command=shift; + + # To determine if the command is safe, compare it with the + # *_trusted_checkout config settings. Those settings are + # templates for allowed commands, so make sure that each word + # of the command matches the corresponding word of the template. + + my @words; + foreach my $word (split(' ', $command)) { + # strip quoting + if ($word=~/^'(.*)'$/) { + $word=$1; + } + elsif ($word=~/^"(.*)"$/) { + $word=$1; + } + + push @words, $word; + } + + foreach my $key (grep { /_trusted_checkout$/ } + keys %{$config{''}{DEFAULT}}) { + my @twords=split(' ', $config{''}{DEFAULT}{$key}); + next if @words > @twords; + + my $match=1; + my $url; + for (my $c=0; $c < @twords && $match; $c++) { + if ($twords[$c] eq '$url') { + # Match all the typical characters found in + # urls, plus @ which svn can use. Note + # that the "url" might also be a local + # directory. + $match=( + defined $words[$c] && + $words[$c] =~ /^[-_.+:@\/A-Za-z0-9]+$/ + ); + $url=$words[$c]; + } + elsif ($twords[$c] eq '$repo') { + # If a repo is not specified, assume it + # will be the last path component of the + # url, or something derived from it, and + # check that. + if (! defined $words[$c] && defined $url) { + ($words[$c])=$url=~/\/([^\/]+)\/?$/; + } + + $match=( + defined $words[$c] && + is_trusted_repo($words[$c]) + ); + } + elsif (defined $words[$c] && $twords[$c] eq $words[$c]) { + $match=1; + } + else { + $match=0; + } + } + return 1 if $match; + } + + return 0; +} + +sub trusterror { + die shift()."\n". + "(To trust this file, list it in ~/.mrtrust.)\n"; +} my %loaded; -sub loadconfig { #{{{ +sub loadconfig { my $f=shift; + my $dir=shift; my @toload; my $in; - my $dir; + my $trusted; if (ref $f eq 'GLOB') { $dir=""; - $in=$f; + $in=$f; + $trusted=1; } else { if (! -e $f) { @@ -740,10 +1060,15 @@ sub loadconfig { #{{{ } $loaded{$absf}=1; - ($dir)=$f=~/^(.*\/)[^\/]+$/; + $trusted=is_trusted_config($absf); + if (! defined $dir) { - $dir="."; + ($dir)=$f=~/^(.*\/)[^\/]+$/; + if (! defined $dir) { + $dir="."; + } } + $dir=abs_path($dir)."/"; if (! exists $configfiles{$dir}) { @@ -767,7 +1092,7 @@ sub loadconfig { #{{{ open($in, "<", $f) || die "mr: open $f: $!\n"; } my @lines=<$in>; - close $in; + close $in unless ref $f eq 'GLOB'; my $section; my $line=0; @@ -778,6 +1103,21 @@ sub loadconfig { #{{{ next if /^\s*\#/ || /^\s*$/; if (/^\[([^\]]*)\]\s*$/) { $section=$1; + + if (! $trusted) { + if (! is_trusted_repo($section) || + $section eq 'ALIAS' || + $section eq 'DEFAULT') { + trusterror "mr: illegal section \"[$section]\" in untrusted $f line $line"; + } + } + $section=expandenv($section) if $trusted; + if ($section ne 'ALIAS' && + ! exists $config{$dir}{$section} && + exists $config{$dir}{DEFAULT}) { + # copy in defaults + $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} }; + } } elsif (/^(\w+)\s*=\s*(.*)/) { my $parameter=$1; @@ -791,21 +1131,29 @@ sub loadconfig { #{{{ chomp $value; } + if (! $trusted) { + # Untrusted files can only contain checkout + # parameters. + if ($parameter ne 'checkout') { + trusterror "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line"; + } + if (! is_trusted_checkout($value)) { + trusterror "mr: illegal checkout command \"$value\" in untrusted $f line $line"; + } + } + if ($parameter eq "include") { print "mr: including output of \"$value\"\n" if $verbose; unshift @lines, `$value`; + if ($?) { + print STDERR "mr: include command exited nonzero ($?)\n"; + } next; } if (! defined $section) { die "$f line $.: parameter ($parameter) not in section\n"; } - if ($section ne 'ALIAS' && - ! exists $config{$dir}{$section} && - exists $config{$dir}{DEFAULT}) { - # copy in defaults - $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} }; - } if ($section eq 'ALIAS') { $alias{$parameter}=$value; } @@ -847,9 +1195,16 @@ sub loadconfig { #{{{ foreach (@toload) { loadconfig($_); } -} #}}} +} -sub modifyconfig { #{{{ +sub startingconfig { + %alias=%config=%configfiles=%knownactions=%loaded=(); + my $datapos=tell(DATA); + loadconfig(\*DATA); + seek(DATA,$datapos,0); # rewind +} + +sub modifyconfig { my $f=shift; # the section to modify or add my $targetsection=shift; @@ -900,7 +1255,7 @@ sub modifyconfig { #{{{ $addfields->(); } - $section=$1; + $section=expandenv($1); push @out, $_; } @@ -944,9 +1299,9 @@ sub modifyconfig { #{{{ open(my $out, ">", $f) || die "mr: write $f: $!\n"; print $out @out; close $out; -} #}}} +} -sub dispatch { #{{{ +sub dispatch { my $action=shift; # actions that do not operate on all repos @@ -959,6 +1314,16 @@ sub dispatch { #{{{ elsif ($action eq 'register') { register(@ARGV); } + elsif ($action eq 'bootstrap') { + bootstrap(); + } + elsif ($action eq 'remember' || + $action eq 'offline' || + $action eq 'online') { + my @repos=selectrepos; + action($action, @{$repos[0]}) if @repos; + exit 0; + } if (!$jobs || $jobs > 1) { mrs($action, selectrepos()); @@ -968,13 +1333,13 @@ sub dispatch { #{{{ record($repo, action($action, @$repo)); } } -} #}}} +} -sub help { #{{{ +sub help { exec($config{''}{DEFAULT}{help}) || die "exec: $!"; -} #}}} - -sub config { #{{{ +} + +sub config { if (@_ < 2) { die "mr config: not enough parameters\n"; } @@ -1010,10 +1375,15 @@ sub config { #{{{ } modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields; exit 0; -} #}}} +} -sub register { #{{{ - if (! $config_overridden) { +sub register { + if ($config_overridden) { + # Find the directory that the specified config file is + # located in. + ($directory)=abs_path($ENV{MR_CONFIG})=~/^(.*\/)[^\/]+$/; + } + else { # Find the closest known mrconfig file to the current # directory. $directory.="/" unless $directory=~/\/$/; @@ -1050,10 +1420,60 @@ sub register { #{{{ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); print "mr register: running >>$command<<\n" if $verbose; exec($command) || die "exec: $!"; -} #}}} +} + +sub bootstrap { + my $url=shift @ARGV; + my $dir=shift @ARGV || "."; + + if (! defined $url || ! length $url) { + die "mr: bootstrap requires url\n"; + } + + # Download the config file to a temporary location. + eval q{use File::Temp}; + die $@ if $@; + my $tmpconfig=File::Temp->new(); + my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); + push(@curlargs, "-k") if $insecure; + my $curlstatus = system(@curlargs); + die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60; + die "mr bootstrap: download of $url failed\n" if $curlstatus != 0; + + if (! -e $dir) { + system("mkdir", "-p", $dir); + } + chdir($dir) || die "chdir $dir: $!"; + + # Special case to handle checkout of the "." repo, which + # would normally be skipped. + my $topdir=abs_path(".")."/"; + my @repo=($topdir, $topdir, "."); + loadconfig($tmpconfig, $topdir); + record(\@repo, action("checkout", @repo, 1)) + if exists $config{$topdir}{"."}{"checkout"}; + + if (-e ".mrconfig") { + print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $url\n"; + } + else { + eval q{use File::Copy}; + die $@ if $@; + move($tmpconfig, ".mrconfig") || die "rename: $!"; + } + + # Reload the config file (in case we got a different version) + # and checkout everything else. + startingconfig(); + loadconfig(".mrconfig"); + dispatch("checkout"); + @skipped=grep { abs_path($_) ne abs_path($topdir) } @skipped; + showstats("bootstrap"); + exitstats(); +} # alias expansion and command stemming -sub expandaction { #{{{ +sub expandaction { my $action=shift; if (exists $alias{$action}) { $action=$alias{$action}; @@ -1074,27 +1494,48 @@ sub expandaction { #{{{ } } return $action; -} #}}} +} + +sub find_mrconfig { + my $dir=getcwd(); + while (length $dir) { + if (-e "$dir/.mrconfig") { + return "$dir/.mrconfig"; + } + $dir=~s/\/[^\/]*$//; + } + return "$ENV{HOME}/.mrconfig"; +} -sub getopts { #{{{ +sub getopts { + my @saved=@ARGV; Getopt::Long::Configure("bundling", "no_permute"); my $result=GetOptions( "d|directory=s" => sub { $directory=abs_path($_[1]) }, "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 }, + "p|path" => sub { }, # now default, ignore "v|verbose" => \$verbose, "q|quiet" => \$quiet, "s|stats" => \$stats, + "k|insecure" => \$insecure, "i|interactive" => \$interactive, "n|no-recurse:i" => \$max_depth, "j|jobs:i" => \$jobs, + "t|trust-all" => \$trust_all, ); if (! $result || @ARGV < 1) { - die("Usage: mr [-d directory] action [params ...]\n". + die("Usage: mr [options] action [params ...]\n". "(Use mr help for man page.)\n"); } -} #}}} + + $ENV{MR_SWITCHES}=""; + foreach my $option (@saved) { + last if $option eq $ARGV[0]; + $ENV{MR_SWITCHES}.="$option "; + } +} -sub init { #{{{ +sub init { $SIG{INT}=sub { print STDERR "mr: interrupted\n"; exit 2; @@ -1116,33 +1557,35 @@ sub init { #{{{ use FindBin qw($Bin $Script); $ENV{MR_PATH}=$Bin."/".$Script; }; -} #}}} +} + +sub exitstats { + if (@failed) { + exit 1; + } + else { + exit 0; + } +} -sub main { #{{{ +sub main { getopts(); init(); - loadconfig(\*DATA); + + startingconfig(); + loadconfig("$ENV{HOME}/.mrconfig"); loadconfig($ENV{MR_CONFIG}); #use Data::Dumper; print Dumper(\%config); - + my $action=expandaction(shift @ARGV); dispatch($action); - showstats($action); - if (@failed) { - exit 1; - } - elsif (! @ok && @skipped) { - exit 1; - } - else { - exit 0; - } -} #}}} + showstats($action); + exitstats(); +} # Finally, some useful actions that mr knows about by default. # These can be overridden in ~/.mrconfig. -#DATA{{{ __DATA__ [ALIAS] co = checkout @@ -1166,7 +1609,7 @@ lib = if [ -z "$1" ] || [ -z "$2" ]; then error "mr: usage: hours_since action num" fi - for dir in .git .svn .bzr CVS .hg _darcs; do + for dir in .git .svn .bzr CVS .hg _darcs _FOSSIL_; do if [ -e "$MR_REPO/$dir" ]; then flagfile="$MR_REPO/$dir/.mr_last$1" break @@ -1177,10 +1620,10 @@ lib = fi delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"` if [ "$delta" -lt "$2" ]; then - exit 0 + return 1 else touch "$flagfile" - exit 1 + return 0 fi } @@ -1190,6 +1633,7 @@ bzr_test = test -d "$MR_REPO"/.bzr cvs_test = test -d "$MR_REPO"/CVS hg_test = test -d "$MR_REPO"/.hg darcs_test = test -d "$MR_REPO"/_darcs +fossil_test = test -f "$MR_REPO"/_FOSSIL_ git_bare_test = test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags && test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config && @@ -1197,17 +1641,19 @@ git_bare_test = svn_update = svn update "$@" git_update = git pull "$@" -bzr_update = bzr merge "$@" +bzr_update = bzr merge --pull "$@" cvs_update = cvs update "$@" hg_update = hg pull "$@" && hg update "$@" darcs_update = darcs pull -a "$@" +fossil_update = fossil pull "$@" svn_status = svn status "$@" -git_status = git status "$@" || true -bzr_status = bzr status "$@" +git_status = git status -s "$@" || true +bzr_status = bzr status --short "$@" cvs_status = cvs status "$@" hg_status = hg status "$@" darcs_status = darcs whatsnew -ls "$@" || true +fossil_status = fossil changes "$@" svn_commit = svn commit "$@" git_commit = git commit -a "$@" && git push --all @@ -1215,11 +1661,21 @@ bzr_commit = bzr commit "$@" && bzr push cvs_commit = cvs commit "$@" hg_commit = hg commit -m "$@" && hg push darcs_commit = darcs record -a -m "$@" && darcs push -a +fossil_commit = fossil commit "$@" git_record = git commit -a "$@" bzr_record = bzr commit "$@" hg_record = hg commit -m "$@" darcs_record = darcs record -a -m "$@" +fossil_record = fossil commit "$@" + +svn_push = : +git_push = git push "$@" +bzr_push = bzr push "$@" +cvs_push = : +hg_push = hg push "$@" +darcs_push = darcs push -a "$@" +fossil_push = fossil push "$@" svn_diff = svn diff "$@" git_diff = git diff "$@" @@ -1227,6 +1683,7 @@ bzr_diff = bzr diff "$@" cvs_diff = cvs diff "$@" hg_diff = hg diff "$@" darcs_diff = darcs diff -u "$@" +fossil_diff = fossil diff "$@" svn_log = svn log "$@" git_log = git log "$@" @@ -1235,6 +1692,9 @@ cvs_log = cvs log "$@" hg_log = hg log "$@" darcs_log = darcs changes "$@" git_bare_log = git log "$@" +fossil_log = fossil timeline "$@" + +run = "$@" svn_register = url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2` @@ -1280,21 +1740,73 @@ git_bare_register = fi echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'" +fossil_register = + url=`fossil remote-url` + repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'` + echo "Registering fossil repository $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'" + +svn_trusted_checkout = svn co $url $repo +svn_alt_trusted_checkout = svn checkout $url $repo +git_trusted_checkout = git clone $url $repo +bzr_trusted_checkout = bzr clone $url $repo +# cvs: too hard +hg_trusted_checkout = hg clone $url $repo +darcs_trusted_checkout = darcs get $url $repo +git_bare_trusted_checkout = git clone --bare $url $repo +# fossil: messy to do + help = + case `uname -s` in + SunOS) + SHOWMANFILE="man -f" + ;; + Darwin) + SHOWMANFILE="man" + ;; + *) + SHOWMANFILE="man -l" + ;; + esac if [ ! -e "$MR_PATH" ]; then error "cannot find program path" fi tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed" trap "rm -f $tmp" exit pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed" - man -l "$tmp" || error "man failed" + $SHOWMANFILE "$tmp" || error "man failed" list = true config = +bootstrap = + +online = + if [ -s ~/.mrlog ]; then + info "running offline commands" + mv -f ~/.mrlog ~/.mrlog.old + if ! sh -e ~/.mrlog.old; then + error "offline command failed; left in ~/.mrlog.old" + fi + rm -f ~/.mrlog.old + else + info "no offline commands to run" + fi +offline = + umask 077 + touch ~/.mrlog + info "offline mode enabled" +remember = + info "remembering command: 'mr $@'" + command="mr -d '$(pwd)' $MR_SWITCHES" + for w in "$@"; do + command="$command '$w'" + done + if [ ! -e ~/.mrlog ] || ! grep -q -F "$command" ~/.mrlog; then + echo "$command" >> ~/.mrlog + fi ed = echo "A horse is a horse, of course, of course.." T = echo "I pity the fool." right = echo "Not found." -#}}} # vim:sw=8:sts=0:ts=8:noet