X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/99a9fd6c2b74cb771d07996f6f027d007d50239a..fef39d7214a11d37dd7b5e570419de5637bdcda4:/mr?ds=sidebyside

diff --git a/mr b/mr
index 6a525cd..577725d 100755
--- a/mr
+++ b/mr
@@ -30,7 +30,7 @@ control system:
 
 =over 4
 
-=item checkout
+=item checkout (or co)
 
 Checks out all the registered repositories that are not already checked
 out.
@@ -46,7 +46,7 @@ If a repository isn't checked out yet, it will first check it out.
 Displays a status report for each registered repository, showing what
 uncommitted changes are present in the repository.
 
-=item commit
+=item commit (or ci)
 
 Commits changes to each registered repository. (By default, changes
 are pushed to the remote repository too, when using distributed systems
@@ -101,17 +101,23 @@ environment, where any additional parameters you pass are available in
 a command, except for the "checkout" command, which is run in the parent
 of the repository directory, since the repository isn't checked out yet.
 
-There are two special parameters. If the "skip" parameter is set and
+There are three special parameters. If the "skip" parameter is set and
 its command returns nonzero, then B<mr> will skip acting on that repository.
 If the "chain" parameter is set and its command returns nonzero, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
-should avoid chaining from repositories with untrusted committers.)
+should avoid chaining from repositories with untrusted committers.) The
+"lib" parameter can specify some shell code that will be run before each
+command, this can be a useful way to define shell functions other commands
+can use.
 
 The "default" section allows setting up default handlers for each action,
 and is overridden by the contents of other sections. mr contains default
 handlers for the "update", "status", and "commit" actions, so normally
 you only need to specify what to do for "checkout".
 
+The "alias" section allows adding aliases for commands. Each parameter
+is an alias, and its value is the command to run.
+
 For example:
 
   [src]
@@ -119,10 +125,19 @@ For example:
   chain = true
 
   [src/linux-2.6]
-  # only check this out on kodama
-  skip = test $(hostname) != kodama
+  skip = small
   checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 
+  [default]
+  lib = \
+  small() {
+  	case "$(hostname)" in; \
+  	slug|snail); \
+  		return 0; ;; ; \
+  	esac; \
+  	return 1; \
+  }
+
 =head1 AUTHOR
 
 Copyright 2007 Joey Hess <joey@kitenet.net>
@@ -143,6 +158,7 @@ my $config="$ENV{HOME}/.mrconfig";
 my $verbose=0;
 my %config;
 my %knownactions;
+my %alias;
 
 Getopt::Long::Configure("no_permute");
 my $result=GetOptions(
@@ -159,14 +175,30 @@ loadconfig($config);
 #use Data::Dumper;
 #print Dumper(\%config);
 
+# alias expansion and command stemming
 my $action=shift @ARGV;
-if (! $knownactions{$action}) {
-	my @matches = grep { /^\Q$action\E/ } keys %knownactions;
-	if (@matches == 1) {
-		$action=$matches[0];
+if (! exists $knownactions{$action}) {
+	if (exists $alias{$action}) {
+		$action=$alias{$action};
 	}
 	else {
-		die "mr: ambiguous action \"$action\" (matches @matches)\n";
+		my @matches = grep { /^\Q$action\E/ }
+			keys %knownactions, keys %alias;
+		if (@matches == 1) {
+			$action=$matches[0];
+		}
+		else {
+			die "mr: ambiguous action \"$action\" (matches @matches)\n";
+		}
+	}
+}
+
+# handle being in a subdir of a repository
+foreach my $topdir (sort keys %config) {
+	foreach my $subdir (sort keys %{$config{$topdir}}) {
+		if ($directory =~ /^\Q$topdir$subdir\E\//) {
+			$directory=$topdir.$subdir;
+		}
 	}
 }
 
@@ -189,15 +221,6 @@ foreach my $topdir (sort keys %config) {
 		print "\n" unless $first;
 		$first=0;
 
-		if (exists $config{$topdir}{$subdir}{skip}) {
-			my $ret=system($config{$topdir}{$subdir}{skip});
-			if ($ret >> 8 == 0) {
-				print "mr $action: $dir skipped per config file\n" if $verbose;
-				push @skipped, $dir;
-				next;
-			}
-		}
-
 		action($action, $dir, $topdir, $subdir);
 
 	}
@@ -205,32 +228,46 @@ foreach my $topdir (sort keys %config) {
 
 sub action {
 	my ($action, $dir, $topdir, $subdir) = @_;
+	
+	my $lib= exists $config{$topdir}{$subdir}{lib} ?
+	                $config{$topdir}{$subdir}{lib} : "";
 
 	if ($action eq 'checkout') {
 		if (-d $dir) {
-			print "mr $action: $dir already exists, skipping checkout\n";
+			print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
 			push @skipped, $dir;
 			return;
 		}
 		$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
 	}
-	if ($action eq 'update') {
+	elsif ($action eq 'update') {
 		if (! -d $dir) {
 			return action("checkout", $dir, $topdir, $subdir);
 		}
 	}
-
+	
 	if (! chdir($dir)) {
 		print STDERR "mr $action: failed to chdir to $dir: $!\n";
 		push @skipped, $dir;
 	}
-	elsif (! exists $config{$topdir}{$subdir}{$action}) {
+
+	if (exists $config{$topdir}{$subdir}{skip}) {
+		my $ret=system($lib.$config{$topdir}{$subdir}{skip});
+		if ($ret >> 8 == 0) {
+			print "mr $action: $dir skipped per config file\n" if $verbose;
+			push @skipped, $dir;
+			return;
+		}
+	}
+
+	if (! exists $config{$topdir}{$subdir}{$action}) {
 		print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
 		push @skipped, $dir;
 	}
 	else {
 		print "mr $action: in $dir\n";
-		my $command="set -e; my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
+		my $command="set -e; ".$lib.
+			"my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
 			join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
 		my $ret=system($command);
 		if ($ret != 0) {
@@ -263,7 +300,13 @@ print "\nmr $action: finished (".join("; ",
 	showstat($#failed+1, "failed", "failed"),
 	showstat($#skipped+1, "skipped", "skipped"),
 ).")\n";
-exit @failed ? 1 : 0;
+if (@failed) {
+	exit 1;
+}
+elsif (! @successful && @skipped) {
+	exit 1;
+}
+exit 0;
 
 my %loaded;
 sub loadconfig {
@@ -324,23 +367,31 @@ sub loadconfig {
 			if (! defined $section) {
 				die "$f line $.: parameter ($parameter) not in section\n";
 			}
-			if (! exists $config{$dir}{$section} &&
-			      exists $config{$dir}{default}) {
+			if ($section ne 'alias' &&
+			    ! exists $config{$dir}{$section} &&
+			    exists $config{$dir}{default}) {
 				# copy in defaults
 				$config{$dir}{$section}={ %{$config{$dir}{default}} };
 			}
-			$config{$dir}{$section}{$parameter}=$value;
-			$knownactions{$parameter}=1;
-
-			if ($parameter eq 'chain' &&
-			    length $dir && $section ne "default" &&
-			    -e $dir.$section."/.mrconfig" &&
-		    	    system($value) >> 8 == 0) {
-				push @toload, $dir.$section."/.mrconfig";
-		        }
+			if ($section eq 'alias') {
+				$alias{$parameter}=$value;
+			}
+			elsif ($parameter eq 'lib') {
+				$config{$dir}{$section}{lib}.=$value." ; ";
+			}
+			else {
+				$config{$dir}{$section}{$parameter}=$value;
+				$knownactions{$parameter}=1;
+				if ($parameter eq 'chain' &&
+				    length $dir && $section ne "default" &&
+				    -e $dir.$section."/.mrconfig" &&
+			    	    system($value) >> 8 == 0) {
+					push @toload, $dir.$section."/.mrconfig";
+			        }
+			}
 		}
 		else {
-				die "$f line $.: parse error\n";
+			die "$f line $.: parse error\n";
 		}
 	}
 	close $in;
@@ -350,35 +401,39 @@ sub loadconfig {
 	}
 }
 
-__DATA__
-# Some useful actions that mr knows about by default.
+# Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
+__DATA__
+[alias]
+	co = checkout
+	ci = commit
 [default]
+lib = \
+	error() { \
+		echo "mr: $@" >&2; \
+		exit 1; \
+	}
 update = \
 	if [ -d .svn ]; then \
-		svn update; \
+		svn update "$@"; \
 	elif [ -d .git ]; then \
-		git pull origin master; \
+		git pull origin master "$@"; \
 	else \
-		echo "mr update: unknown repo type"; \
-		exit 1; \
+		error "unknown repo type"; \
 	fi
 status = \
 	if [ -d .svn ]; then \
-		svn status; \
+		svn status "$@"; \
 	elif [ -d .git ]; then \
-		git status || true; \
+		git status "$@" || true; \
 	else \
-		echo "mr status: unknown repo type"; \
-		exit 1; \
+		error "unknown repo type"; \
 	fi
 commit = \
 	if [ -d .svn ]; then \
 		svn commit "$@"; \
 	elif [ -d .git ]; then \
-		echo git commit -a "$@" && echo git push --all \
-		git commit -a "$@" && git push --all \
+		git commit -a "$@" && git push --all; \
 	else \
-		echo "mr commit: unknown repo type"; \
-		exit 1; \
+		error "unknown repo type"; \
 	fi