X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/afce885e38b9bd48deb5b0ab8904f8cdd73c9b91..18b367967a76db6639bc98ed58a4b1e37fb140d2:/mr?ds=sidebyside diff --git a/mr b/mr index 956dd7d..4d77368 100755 --- a/mr +++ b/mr @@ -16,6 +16,8 @@ B [options] commit [-m "message"] B [options] record [-m "message"] +B [options] fetch + B [options] push B [options] diff @@ -41,7 +43,7 @@ B [options] remember action [params ...] B is a Multiple Repository management tool. It can checkout, update, or perform other actions on a set of repositories as if they were one combined repository. It supports any combination of subversion, git, cvs, mercurial, -bzr, darcs and fossil repositories, and support for other version +bzr, darcs, fossil and veracity repositories, and support for other version control systems can easily be added. B cds into and operates on all registered repositories at or below your @@ -73,7 +75,8 @@ If a repository isn't checked out yet, it will first check it out. =item status Displays a status report for each repository, showing what -uncommitted changes are present in the repository. +uncommitted changes are present in the repository. For distributed version +control systems, also shows unpushed local branches. =item commit (or ci) @@ -91,6 +94,12 @@ remote repository. Only supported for distributed version control systems. The optional -m parameter allows specifying a commit message. +=item fetch + +Fetches from each repository's remote repository, but does not +update the working copy. Only supported for some distributed version +control systems. + =item push Pushes committed local changes to the remote repository. A no-op for @@ -116,8 +125,10 @@ These commands are also available: =item bootstrap url [directory] -Causes mr to download the url, and use it as a .mrconfig file -to checkout the repositories listed in it, into the specified directory. +Causes mr to download the url, and use it as a .mrconfig file to checkout +the repositories listed in it, into the specified directory. + +To use scp to download, the url may have the form ssh://[user@]host:file The directory will be created if it does not exist. If no directory is specified, the current directory will be used. @@ -208,10 +219,17 @@ the current working directory. =item --config mrconfig -Use the specified mrconfig file. The default is to use both B<~/.mrconfig> -as well as look for a .mrconfig file in the current directory, or in one +Use the specified mrconfig file. The default is to use both F<~/.mrconfig> +as well as look for a F<.mrconfig> file in the current directory, or in one of its parent directories. +=item -f + +=item --force + +Force mr to act on repositories that would normally be skipped due to their +configuration. + =item -v =item --verbose @@ -222,7 +240,7 @@ Be verbose. =item --quiet -Be quiet. This supresses mr's usual output, as well as any output from +Be quiet. This suppresses mr's usual output, as well as any output from commands that are run (including stderr output). If a command fails, the output will be shown. @@ -274,7 +292,7 @@ a good speedup in updates without loading the machine too much. =item --trust-all -Trust all mrconfig files even if they are not listed in ~/.mrtrust. +Trust all mrconfig files even if they are not listed in F<~/.mrtrust>. Use with caution. =item -p @@ -287,7 +305,7 @@ This obsolete flag is ignored. =head1 MRCONFIG FILES -Here is an example .mrconfig file: +Here is an example F<.mrconfig> file: [src] checkout = svn checkout svn://svn.example.com/src/trunk src @@ -298,14 +316,14 @@ Here is an example .mrconfig file: cd linux-2.6 && git checkout -b mybranch origin/master -The .mrconfig file uses a variant of the INI file format. Lines starting with -"#" are comments. Values can be continued to the following line by -indenting the line with whitespace. +The F<.mrconfig> file uses a variant of the INI file format. Lines +starting with "#" are comments. Values can be continued to the +following line by indenting the line with whitespace. -The "DEFAULT" section allows setting default values for the sections that +The C section allows setting default values for the sections that come after it. -The "ALIAS" section allows adding aliases for actions. Each parameter +The C section allows adding aliases for actions. Each parameter is an alias, and its value is the action to use. All other sections add repositories. The section header specifies the @@ -313,7 +331,7 @@ directory where the repository is located. This is relative to the directory that contains the mrconfig file, but you can also choose to use absolute paths. (Note that you can use environment variables in section names; they will be passed through the shell for expansion. For example, -"[$HOSTNAME]", or "[${HOSTNAME}foo]") +C<[$HOSTNAME]>, or C<[${HOSTNAME}foo]>). Within a section, each parameter defines a shell command to run to handle a given action. mr contains default handlers for "update", "status", @@ -322,24 +340,24 @@ given action. mr contains default handlers for "update", "status", Normally you only need to specify what to do for "checkout". Here you specify the command to run in order to create a checkout of the repository. The command will be run in the parent directory, and must create the -repository's directory. So use "git clone", "svn checkout", "bzr branch" -or "bzr checkout" (for a bound branch), etc. +repository's directory. So use C, C, C +or C (for a bound branch), etc. -Note that these shell commands are run in a "set -e" shell +Note that these shell commands are run in a C shell environment, where any additional parameters you pass are available in -"$@". All commands other than "checkout" are run inside the repository, +C<$@>. All commands other than "checkout" are run inside the repository, though not necessarily at the top of it. -The "MR_REPO" environment variable is set to the path to the top of the +The C environment variable is set to the path to the top of the repository. (For the "register" action, "MR_REPO" is instead set to the basename of the directory that should be created when checking the repository out.) -The "MR_CONFIG" environment variable is set to the .mrconfig file +The C environment variable is set to the .mrconfig file that defines the repo being acted on, or, if the repo is not yet in a config -file, the .mrconfig file that should be modified to register the repo. +file, the F<.mrconfig> file that should be modified to register the repo. -The "MR_ACTION" environment variable is set to the command being run +The C environment variable is set to the command being run (update, checkout, etc). A few parameters have special meanings: @@ -350,7 +368,7 @@ A few parameters have special meanings: If the "skip" parameter is set and its command returns true, then B will skip acting on that repository. The command is passed the action -name in $1. +name in C<$1>. Here are two examples. The first skips the repo unless mr is run by joey. The second uses the hours_since function @@ -367,7 +385,7 @@ been at least 12 hours since the last update. Another way to use skip is for a lazy checkout. This makes mr skip operating on a repo unless it already exists. To enable the -repo, you have to explicitly check it out (using "mr -d foo checkout"). +repo, you have to explicitly check it out (using "mr --force -d foo checkout"). [foo] checkout = ... @@ -386,7 +404,7 @@ repository, ordering it to be processed earlier is not recommended. =item chain If the "chain" parameter is set and its command returns true, then B -will try to load a .mrconfig file from the root of the repository. +will try to load a F<.mrconfig> file from the root of the repository. =item include @@ -398,7 +416,7 @@ Unlike all other parameters, this parameter does not need to be placed within a section. B ships several libraries that can be included to add support for -additional version control type things (unison, git-svn, vcsh, git-fake-bare, +additional version control type things (unison, git-svn, git-fake-bare, git-subtree). To include them all, you could use: include = cat /usr/share/mr/* @@ -410,14 +428,18 @@ See the individual files for details. If the "deleted" parameter is set and its command returns true, then B will treat the repository as deleted. It won't ever actually delete the repository, but it will warn if it sees the repository's directory. -This is useful when one mrconfig file is shared amoung multiple machines, +This is useful when one mrconfig file is shared among multiple machines, to keep track of and remember to delete old repositories. =item lib -The "lib" parameter can specify some shell code that will be run before each -command, this can be a useful way to define shell functions for other commands -to use. +The "lib" parameter can specify some shell code that will be run +before each command, this can be a useful way to define shell +functions for other commands to use. + +Unlike most other parameters, this can be specified multiple times, in +which case the chunks of shell code are accumulatively concatenated +together. =item fixups @@ -426,46 +448,57 @@ is checked out, or updated. This provides an easy way to do things like permissions fixups, or other tweaks to the repository content, whenever the repository is changed. -=item pre_ and post_ - -If a "pre_action" parameter is set, its command is run before mr performs the -specified action. Similarly, "post_action" parameters are run after mr -successfully performs the specified action. For example, "pre_commit" is -run before committing; "post_update" is run after updating. - -=back +=item VCS_action When looking for a command to run for a given action, mr first looks for a parameter with the same name as the action. If that is not found, it looks for a parameter named "VCS_action" (substituting in the name of the -version control system and the action). The name of the version control -system is itself determined by running each defined "VCS_test" action, -until one succeeds. +version control system and the action). Internally, mr has settings for "git_update", "svn_update", etc. To change the action that is performed for a given version control system, you can override these VCS specific actions. To add a new version control system, you can just add VCS specific actions for it. +=item pre_ and post_ + +If a "pre_action" parameter is set, its command is run before mr performs the +specified action. Similarly, "post_action" parameters are run after mr +successfully performs the specified action. For example, "pre_commit" is +run before committing; "post_update" is run after updating. + +=item _append + +Any parameter can be suffixed with C<_append>, to add an additional value +to the existing value of the parameter. In this way, actions +can be constructed accumulatively. + +=item VCS_test + +The name of the version control system is itself determined by +running each defined "VCS_test" action, until one succeeds. + +=back + =head1 UNTRUSTED MRCONFIG FILES Since mrconfig files can contain arbitrary shell commands, they can do anything. This flexibility is good, but it also allows a malicious mrconfig file to delete your whole home directory. Such a file might be contained -inside a repository that your main ~/.mrconfig checks out. To +inside a repository that your main F<~/.mrconfig> checks out. To avoid worries about evil commands in a mrconfig file, mr defaults to -reading all mrconfig files other than the main ~/.mrconfig in untrusted +reading all mrconfig files other than the main F<~/.mrconfig> in untrusted mode. In untrusted mode, mrconfig files are limited to running only known safe commands (like "git clone") in a carefully checked manner. -To configure mr to trust other mrconfig files, list them in ~/.mrtrust. +To configure mr to trust other mrconfig files, list them in F<~/.mrtrust>. One mrconfig file should be listed per line. Either the full pathname -should be listed, or the pathname can start with "~/" to specify a file +should be listed, or the pathname can start with F<~/> to specify a file relative to your home directory. =head1 OFFLINE LOG FILE -The ~/.mrlog file contains commands that mr has remembered to run later, +The F<~/.mrlog> file contains commands that mr has remembered to run later, due to being offline. You can delete or edit this file to remove commands, or even to add other commands for 'mr online' to run. If the file is present, mr assumes it is in offline mode. @@ -473,7 +506,7 @@ present, mr assumes it is in offline mode. =head1 EXTENSIONS mr can be extended to support things such as unison and git-svn. Some -files providing such extensions are available in /usr/share/mr/. See +files providing such extensions are available in F. See the documentation in the files for details about using them. =head1 EXIT STATUS @@ -508,6 +541,7 @@ my $config_overridden=0; my $verbose=0; my $quiet=0; my $stats=0; +my $force=0; my $insecure=0; my $interactive=0; my $max_depth; @@ -516,6 +550,7 @@ my $jobs=1; my $trust_all=0; my $directory=getcwd(); +my $HOME_MR_CONFIG = "$ENV{HOME}/.mrconfig"; $ENV{MR_CONFIG}=find_mrconfig(); # globals :-( @@ -527,6 +562,57 @@ my (@ok, @failed, @skipped); main(); +sub shellquote { + my $i=shift; + $i=~s/'/'"'"'/g; + return "'$i'"; +} + +# Runs a shell command using a supplied function. +# The lib will be included in the shell command line, and any params +# will be available in the shell as $1, $2, etc. +my $lastlib; +sub runsh { + my ($action, $topdir, $subdir, $command, $params, $runner) = @_; + + # optimisation: avoid running the shell for true and false + if ($command =~ /^\s*true\s*$/) { + $?=0; + return 0; + } + elsif ($command =~ /^\s*false\s*$/) { + $?=0; + return 1; + } + + my $quotedparams=join(" ", (map { shellquote($_) } @$params)); + my $lib=exists $config{$topdir}{$subdir}{lib} ? + $config{$topdir}{$subdir}{lib}."\n" : ""; + if ($verbose && (! defined $lastlib || $lastlib ne $lib)) { + print "mr library now: >>$lib<<\n"; + $lastlib=$lib; + } + my $shellcode="set -e;".$lib. + "my_sh(){ $command\n }; my_sh $quotedparams"; + print "mr $action: running $action >>$command<<\n" if $verbose; + $runner->($shellcode); +} + +my %perl_cache; +sub perl { + my $id=shift; + my $s=shift; + if ($s =~ m/^perl:\s+(.*)/s) { + return $perl_cache{$1} if exists $perl_cache{$1}; + my $sub=eval "sub {$1}"; + if (! defined $sub) { + print STDERR "mr: bad perl code in $id: $@\n"; + } + return $perl_cache{$1} = $sub; + } + return undef; +} + my %vcs; sub vcs_test { my ($action, $dir, $topdir, $subdir) = @_; @@ -535,33 +621,47 @@ sub vcs_test { return $vcs{$dir}; } - my $test="set -e\n"; + my $test=""; + my %perltest; foreach my $vcs_test ( sort { length $a <=> length $b || $a cmp $b } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) { - my ($vcs)=$vcs_test=~/(.*)_test/; - $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test; - $test.="if my_$vcs_test; then echo $vcs; fi\n"; + my ($vcs)=$vcs_test =~ /(.*)_test/; + my $p=perl($vcs_test, $config{$topdir}{$subdir}{$vcs_test}); + if (defined $p) { + $perltest{$vcs}=$p; + } + else { + $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test; + $test.="if my_$vcs_test; then echo $vcs; fi\n"; + } } - $test=$config{$topdir}{$subdir}{lib}."\n".$test - if exists $config{$topdir}{$subdir}{lib}; - - print "mr $action: running vcs test >>$test<<\n" if $verbose; - my $vcs=`$test`; - chomp $vcs; - if ($vcs=~/\n/s) { - $vcs=~s/\n/, /g; - print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n"; + + my @vcs; + foreach my $vcs (keys %perltest) { + if ($perltest{$vcs}->()) { + push @vcs, $vcs; + } + } + + push @vcs, split(/\n/, + runsh("vcs test", $topdir, $subdir, $test, [], sub { + my $sh=shift; + my $ret=`$sh`; + return $ret; + })) if length $test; + if (@vcs > 1) { + print STDERR "mr $action: found multiple possible repository types (@vcs) for ".fulldir($topdir, $subdir)."\n"; return undef; } - if (! length $vcs) { + if (! @vcs) { return $vcs{$dir}=undef; } else { - return $vcs{$dir}=$vcs; + return $vcs{$dir}=$vcs[0]; } } @@ -595,24 +695,24 @@ sub fulldir { sub action { my ($action, $dir, $topdir, $subdir, $force_checkout) = @_; my $fulldir=fulldir($topdir, $subdir); + my $checkout_dir; $ENV{MR_CONFIG}=$configfiles{$topdir}; - my $lib=exists $config{$topdir}{$subdir}{lib} ? - $config{$topdir}{$subdir}{lib}."\n" : ""; my $is_checkout=($action eq 'checkout'); my $is_update=($action =~ /update/); - $ENV{MR_REPO}=$dir; + ($ENV{MR_REPO}=$dir) =~ s!/$!!; $ENV{MR_ACTION}=$action; foreach my $testname ("skip", "deleted") { + next if $force && $testname eq "skip"; + my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout); if (defined $testcommand) { - my $test="set -e;".$lib. - "my_action(){ $testcommand\n }; my_action '$action'"; - print "mr $action: running $testname test >>$test<<\n" if $verbose; - my $ret=system($test); + my $ret=runsh "$testname test", $topdir, $subdir, + $testcommand, [$action], + sub { system(shift()) }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $action: interrupted\n"; @@ -637,6 +737,7 @@ sub action { } if ($is_checkout) { + $checkout_dir=$dir; if (! $force_checkout) { if (-d $dir) { print "mr $action: $dir already exists, skipping checkout\n" if $verbose; @@ -689,22 +790,22 @@ sub action { my $hookret=hook("pre_$action", $topdir, $subdir); return $hookret if $hookret != OK; - $command="set -e; ".$lib. - "my_action(){ $command\n }; my_action ". - join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV); - print "mr $action: running >>$command<<\n" if $verbose; - my $ret; - if ($quiet) { - my $output = qx/$command 2>&1/; - $ret = $?; - if ($ret != 0) { - print "$actionmsg\n"; - print STDERR $output; - } - } - else { - $ret=system($command); - } + my $ret=runsh $action, $topdir, $subdir, + $command, \@ARGV, sub { + my $sh=shift; + if ($quiet) { + my $output = qx/$sh 2>&1/; + my $ret = $?; + if ($ret != 0) { + print "$actionmsg\n"; + print STDERR $output; + } + return $ret; + } + else { + system($sh); + } + }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $action: interrupted\n"; @@ -740,7 +841,13 @@ sub action { my $ret=hook("post_$action", $topdir, $subdir); return $ret if $ret != OK; - if (($is_checkout || $is_update)) { + if ($is_checkout || $is_update) { + if ($is_checkout && ! $no_chdir) { + if (! chdir($checkout_dir)) { + print STDERR "mr $action: failed to chdir to $checkout_dir: $!\n"; + return FAILED; + } + } my $ret=hook("fixups", $topdir, $subdir); return $ret if $ret != OK; } @@ -755,22 +862,20 @@ sub hook { my $command=$config{$topdir}{$subdir}{$hook}; return OK unless defined $command; - my $lib=exists $config{$topdir}{$subdir}{lib} ? - $config{$topdir}{$subdir}{lib}."\n" : ""; - my $shell="set -e;".$lib. - "my_hook(){ $command\n }; my_hook"; - print "mr $hook: running >>$shell<<\n" if $verbose; - my $ret; - if ($quiet) { - my $output = qx/$shell 2>&1/; - $ret = $?; - if ($ret != 0) { - print STDERR $output; - } - } - else { - $ret=system($shell); - } + my $ret=runsh $hook, $topdir, $subdir, $command, [], sub { + my $sh=shift; + if ($quiet) { + my $output = qx/$sh 2>&1/; + my $ret = $?; + if ($ret != 0) { + print STDERR $output; + } + return $ret; + } + else { + system($sh); + } + }; if ($ret != 0) { if (($? & 127) == 2) { print STDERR "mr $hook: interrupted\n"; @@ -946,7 +1051,10 @@ sub repodir { return $ret; } -# figure out which repos to act on +# Figure out which repos to act on. Returns a list of array refs +# in the format: +# +# [ "$full_repo_path/", "$mr_config_path/", $section_header ] sub selectrepos { my @repos; foreach my $repo (repolist()) { @@ -1005,14 +1113,14 @@ sub is_trusted_config { my $config=shift; # must be abs_pathed already # We always trust ~/.mrconfig. - return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig"); + return 1 if $config eq abs_path($HOME_MR_CONFIG); return 1 if $trust_all; my $trustfile=$ENV{HOME}."/.mrtrust"; if (! %trusted) { - $trusted{"$ENV{HOME}/.mrconfig"}=1; + $trusted{$HOME_MR_CONFIG}=1; if (open (TRUST, "<", $trustfile)) { while () { chomp; @@ -1104,20 +1212,6 @@ sub is_trusted_checkout { return 0; } -sub trusterror { - my ($err, $file, $line, $url)=@_; - - if (defined $url) { - die "$err in untrusted $url line $line\n". - "(To trust this url, --trust-all can be used; but please use caution;\n". - "this can allow arbitrary code execution!)\n"; - } - else { - die "$err in untrusted $file line $line\n". - "(To trust this file, list it in ~/.mrtrust.)\n"; - } -} - my %loaded; sub loadconfig { my $f=shift; @@ -1182,30 +1276,42 @@ sub loadconfig { # Keep track of the current line in the config file; # when a file is included track the current line from the include. - my $line=0; + my $lineno=0; my $included=undef; - my $includeline=0; + + my $line; my $nextline = sub { if ($included) { - $includeline++; $included--; } else { $included=undef; - $includeline=0; - $line++; + $lineno++; } - my $l=shift @lines; - chomp $l; - return $l + $line=shift @lines; + chomp $line; + return $line; }; my $lineerror = sub { my $msg=shift; if (defined $included) { - die "mr: $f line $line include line $includeline: $msg\n"; + die "mr: $msg at $f line $lineno, included line: $line\n"; } else { - die "mr: $f line $line: $msg\n"; + die "mr: $msg at $f line $lineno\n"; + } + }; + my $trusterror = sub { + my $msg=shift; + + if (defined $bootstrap_url) { + die "mr: $msg in untrusted $bootstrap_url line $lineno\n". + "(To trust this url, --trust-all can be used; but please use caution;\n". + "this can allow arbitrary code execution!)\n"; + } + else { + die "mr: $msg in untrusted $f line $lineno\n". + "(To trust this file, list it in ~/.mrtrust.)\n"; } }; @@ -1213,7 +1319,7 @@ sub loadconfig { $_=$nextline->(); if (! $trusted && /[[:cntrl:]]/) { - trusterror("mr: illegal control character", $f, $line, $bootstrap_url); + $trusterror->("illegal control character"); } next if /^\s*\#/ || /^\s*$/; @@ -1224,7 +1330,7 @@ sub loadconfig { if (! is_trusted_repo($section) || $section eq 'ALIAS' || $section eq 'DEFAULT') { - trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url) + $trusterror->("illegal section \"[$section]\""); } } $section=expandenv($section) if $trusted; @@ -1251,7 +1357,7 @@ sub loadconfig { # settings in specific known-safe formats. if ($parameter eq 'checkout') { if (! is_trusted_checkout($value)) { - trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url); + $trusterror->("illegal checkout command \"$value\""); } } elsif ($parameter eq 'order') { @@ -1263,7 +1369,7 @@ sub loadconfig { # safe. } else { - trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url); + $trusterror->("illegal setting \"$parameter=$value\""); } } @@ -1284,8 +1390,8 @@ sub loadconfig { if ($section eq 'ALIAS') { $alias{$parameter}=$value; } - elsif ($parameter eq 'lib') { - $config{$dir}{$section}{lib}.=$value."\n"; + elsif ($parameter eq 'lib' or $parameter =~ s/_append$//) { + $config{$dir}{$section}{$parameter}.="\n".$value."\n"; } else { $config{$dir}{$section}{$parameter}=$value; @@ -1566,11 +1672,18 @@ sub bootstrap { eval q{use File::Temp}; die $@ if $@; my $tmpconfig=File::Temp->new(); - my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); - push(@curlargs, "-k") if $insecure; - my $curlstatus = system(@curlargs); - die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60; - die "mr bootstrap: download of $url failed\n" if $curlstatus != 0; + my @downloader; + if ($url =~ m!^ssh://(.*)!) { + @downloader = ("scp", $1, $tmpconfig); + } + else { + @downloader = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig); + push(@downloader, "-k") if $insecure; + } + my $status = system(@downloader); + die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" + if $downloader[0] eq 'curl' && $status >> 8 == 60; + die "mr bootstrap: download of $url failed\n" if $status != 0; if (! -e $dir) { system("mkdir", "-p", $dir); @@ -1636,7 +1749,7 @@ sub find_mrconfig { } $dir=~s/\/[^\/]*$//; } - return "$ENV{HOME}/.mrconfig"; + return $HOME_MR_CONFIG; } sub getopts { @@ -1646,6 +1759,7 @@ sub getopts { "d|directory=s" => sub { $directory=abs_path($_[1]) }, "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 }, "p|path" => sub { }, # now default, ignore + "f|force" => \$force, "v|verbose" => \$verbose, "q|quiet" => \$quiet, "s|stats" => \$stats, @@ -1705,7 +1819,7 @@ sub main { init(); startingconfig(); - loadconfig("$ENV{HOME}/.mrconfig"); + loadconfig($HOME_MR_CONFIG); loadconfig($ENV{MR_CONFIG}); #use Data::Dumper; print Dumper(\%config); @@ -1762,24 +1876,29 @@ lib = LANG=C bzr info | egrep -q '^Checkout' } lazy() { - if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then + if [ -d "$MR_REPO" ]; then return 1 else return 0 fi } -svn_test = test -d "$MR_REPO"/.svn -git_test = test -d "$MR_REPO"/.git -bzr_test = test -d "$MR_REPO"/.bzr -cvs_test = test -d "$MR_REPO"/CVS -hg_test = test -d "$MR_REPO"/.hg -darcs_test = test -d "$MR_REPO"/_darcs -fossil_test = test -f "$MR_REPO"/_FOSSIL_ -git_bare_test = - test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags && - test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config && - test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true +svn_test = perl: -d "$ENV{MR_REPO}/.svn" +git_test = perl: -e "$ENV{MR_REPO}/.git" +bzr_test = perl: -d "$ENV{MR_REPO}/.bzr" +cvs_test = perl: -d "$ENV{MR_REPO}/CVS" +hg_test = perl: -d "$ENV{MR_REPO}/.hg" +darcs_test = perl: -d "$ENV{MR_REPO}/_darcs" +fossil_test = perl: -f "$ENV{MR_REPO}/_FOSSIL_" +git_bare_test = perl: + -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" && + -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" && + `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get core.bare` =~ /true/ +vcsh_test = perl: + -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" && + -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" && + `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get vcsh.vcsh` =~ /true/ +veracity_test = perl: -d "$ENV{MR_REPO}/.sgdrawer" svn_update = svn update "$@" git_update = git pull "$@" @@ -1789,18 +1908,27 @@ bzr_update = else bzr merge --pull "$@" fi -cvs_update = cvs update "$@" -hg_update = hg pull "$@" && hg update "$@" +cvs_update = cvs -q update "$@" +hg_update = hg pull "$@"; hg update "$@" darcs_update = darcs pull -a "$@" fossil_update = fossil pull "$@" +vcsh_update = vcsh run "$MR_REPO" git pull "$@" +veracity_update = vv pull "$@" && vv update "$@" + +git_fetch = git fetch --all --prune --tags +git_svn_fetch = git svn fetch +darcs_fetch = darcs fetch +hg_fetch = hg pull svn_status = svn status "$@" -git_status = git status -s "$@" || true -bzr_status = bzr status --short "$@" -cvs_status = cvs status "$@" -hg_status = hg status "$@" +git_status = git status -s "$@" || true; git --no-pager log --branches --not --remotes --simplify-by-decoration --decorate --oneline || true +bzr_status = bzr status --short "$@"; bzr missing +cvs_status = cvs -q status | grep -E '^(File:.*Status:|\?)' | grep -v 'Status: Up-to-date' +hg_status = hg status "$@"; hg summary --quiet | grep -v 'parent: 0:' darcs_status = darcs whatsnew -ls "$@" || true fossil_status = fossil changes "$@" +vcsh_status = vcsh run "$MR_REPO" git -c status.relativePaths=false status -s "$@" || true +veracity_status = vv status "$@" svn_commit = svn commit "$@" git_commit = git commit -a "$@" && git push --all @@ -1811,9 +1939,11 @@ bzr_commit = bzr commit "$@" && bzr push fi cvs_commit = cvs commit "$@" -hg_commit = hg commit -m "$@" && hg push -darcs_commit = darcs record -a -m "$@" && darcs push -a +hg_commit = hg commit "$@" && hg push +darcs_commit = darcs record -a "$@" && darcs push -a fossil_commit = fossil commit "$@" +vcsh_commit = vcsh run "$MR_REPO" git commit -a "$@" && vcsh run "$MR_REPO" git push --all +veracity_commit = vv commit "$@" && vv push git_record = git commit -a "$@" bzr_record = @@ -1822,9 +1952,11 @@ bzr_record = else bzr commit "$@" fi -hg_record = hg commit -m "$@" -darcs_record = darcs record -a -m "$@" +hg_record = hg commit "$@" +darcs_record = darcs record -a "$@" fossil_record = fossil commit "$@" +vcsh_record = vcsh run "$MR_REPO" git commit -a "$@" +veracity_record = vv commit "$@" svn_push = : git_push = git push "$@" @@ -1833,14 +1965,18 @@ cvs_push = : hg_push = hg push "$@" darcs_push = darcs push -a "$@" fossil_push = fossil push "$@" +vcsh_push = vcsh run "$MR_REPO" git push "$@" +veracity_push = vv push "$@" svn_diff = svn diff "$@" git_diff = git diff "$@" bzr_diff = bzr diff "$@" -cvs_diff = cvs diff "$@" +cvs_diff = cvs -q diff "$@" hg_diff = hg diff "$@" darcs_diff = darcs diff -u "$@" fossil_diff = fossil diff "$@" +vcsh_diff = vcsh run "$MR_REPO" git diff "$@" +veracity_diff = vv diff "$@" svn_log = svn log "$@" git_log = git log "$@" @@ -1850,6 +1986,15 @@ hg_log = hg log "$@" darcs_log = darcs changes "$@" git_bare_log = git log "$@" fossil_log = fossil timeline "$@" +vcsh_log = vcsh run "$MR_REPO" git log "$@" +veracity_log = vv log "$@" + +hg_grep = hg grep "$@" +cvs_grep = ack-grep "$@" +svn_grep = ack-grep "$@" +git_svn_grep = git grep "$@" +git_grep = git grep "$@" +bzr_grep = ack-grep "$@" run = "$@" @@ -1868,7 +2013,7 @@ git_register = echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'" bzr_register = - url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`" + url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}' | head -n 1`" if [ -z "$url" ]; then error "cannot determine bzr url" fi @@ -1897,11 +2042,23 @@ git_bare_register = fi echo "Registering git url: $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'" +vcsh_register = + url="`LC_ALL=C vcsh run "$MR_REPO" git config --get remote.origin.url`" || true + if [ -z "$url" ]; then + error "cannot determine git url" + fi + echo "Registering git url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="vcsh clone '$url' '$MR_REPO'" fossil_register = url=`fossil remote-url` repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'` echo "Registering fossil repository $url in $MR_CONFIG" mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'" +veracity_register = + url=`vv config | grep sync_targets | sed -e 's/sync_targets:*.//g' -e 's/ //g'` + repo=`vv repo info | grep repository | sed -e 's/Current repository:*.//g' -e 's/ //g'` + echo "Registering veracity repository $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && vv checkout '$repo'" svn_trusted_checkout = svn co $url $repo svn_alt_trusted_checkout = svn checkout $url $repo @@ -1911,7 +2068,9 @@ bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo hg_trusted_checkout = hg clone $url $repo darcs_trusted_checkout = darcs get $url $repo git_bare_trusted_checkout = git clone --bare $url $repo +vcsh_trusted_checkout = vcsh run "$MR_REPO" git clone $url $repo # fossil: messy to do +veracity_trusted_checkout = vv clone $url $repo help = @@ -1967,3 +2126,7 @@ T = echo "I pity the fool." right = echo "Not found." # vim:sw=8:sts=0:ts=8:noet +# Local variables: +# indent-tabs-mode: t +# cperl-indent-level: 8 +# End: