X-Git-Url: https://git.madduck.net/code/myrepos.git/blobdiff_plain/d81ade697e3720bb1467c2da088b547b54fba7ae..dd5d92a7eea054973cbfe58987387b5eb788610e:/mr?ds=inline diff --git a/mr b/mr index 29e5fad..872343b 100755 --- a/mr +++ b/mr @@ -14,30 +14,42 @@ B [options] status B [options] commit [-m "message"] +B [options] record [-m "message"] + B [options] diff B [options] log +B [options] bootstrap url + B [options] register [repository] -B [options] config section [parameter=[value] ...] +B [options] config section ["parameter=[value]" ...] B [options] action [params ...] +B [options] [online|offline] + +B [options] remember action [params ...] + =head1 DESCRIPTION -B is a Multiple Repository management tool. It -can checkout, update, or perform other actions on -a set of repositories as if they were one combined respository. It -supports any combination of subversion, git, cvs, and bzr repositories, -and support for other revision control systems can easily be added. +B is a Multiple Repository management tool. It can checkout, update, or +perform other actions on a set of repositories as if they were one combined +repository. It supports any combination of subversion, git, cvs, mecurial, +bzr and darcs repositories, and support for other revision control systems can +easily be added. -B cds into and operates on all registered repsitories at or below your +B cds into and operates on all registered repositories at or below your working directory. Or, if you are in a subdirectory of a repository that contains no other registered repositories, it will stay in that directory, and work on only that repository, -The predefined commands should be fairly familiar to users of any revision +B is configured by .mrconfig files, which list the repositories. It +starts by reading the .mrconfig file in your home directory, and this can +in turn chain load .mrconfig files from repositories. + +These predefined commands should be fairly familiar to users of any revision control system: =over 4 @@ -60,10 +72,24 @@ uncommitted changes are present in the repository. =item commit (or ci) Commits changes to each repository. (By default, changes are pushed to the -remote repository too, when using distributed systems like git.) +remote repository too, when using distributed systems like git. If you +don't like this default, you can change it in your .mrconfig, or use record +instead.) The optional -m parameter allows specifying a commit message. +=item record + +Records changes to the local repository, but does not push them to the +remote repository. Only supported for distributed revision control systems. + +The optional -m parameter allows specifying a commit message. + +=item push + +Pushes committed local changes to the remote repository. A no-op for +centralized revision control systems. + =item diff Show a diff of uncommitted changes. @@ -72,19 +98,33 @@ Show a diff of uncommitted changes. Show the commit log. +=back + +These commands are also available: + +=over 4 + +=item bootstrap url + +Causes mr to download the url, save it to a .mrconfig file in the +current directory, and then check out all repositories listed in it. + =item list (or ls) List the repositories that mr will act on. =item register -Register an existing repository in the mrconfig file. By default, the -epository in the current directory is registered, or you can specify a +Register an existing repository in a mrconfig file. By default, the +repository in the current directory is registered, or you can specify a directory to register. +The mrconfig file that is modified is chosen by either the -c option, or by +looking for the closest known one at or below the current directory. + =item config -Adds, modifies, removes, or prints a value from the mrconfig file. The next +Adds, modifies, removes, or prints a value from a mrconfig file. The next parameter is the name of the section the value is in. To add or modify values, use one or more instances of "parameter=value". Use "parameter=" to remove a parameter. Use just "parameter" to get the value of a parameter. @@ -97,14 +137,39 @@ To show the command that mr uses to update the repository in src/foo: mr config src/foo update +To see the built-in library of shell functions contained in mr: + + mr config DEFAULT lib + +The ~/.mrconfig file is used by default. To use a different config file, +use the -c option. + +=item offline + +Advises mr that it is in offline mode. Any commands that fail in +offline mode will be remembered, and retried when mr is told it's online. + +=item online + +Advices mr that it is in online mode again. Commands that failed while in +offline mode will be re-run. + +=item remember + +Remember a command, to be run later when mr re-enters online mode. This +implicitly puts mr into offline mode. The command can be any regular mr +command. This is useful when you know that a command will fail due to being +offline, and so don't want to run it right now at all, but just remember +to run it when you go back online. + =item help Displays this help. =back -Actions can be abbreviated to any unambiguous subsctring, so -"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr +Actions can be abbreviated to any unambiguous substring, so +"mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr update" Additional parameters can be passed to most commands, and are passed on @@ -123,20 +188,59 @@ the current working directory. =item -c mrconfig -Use the specified mrconfig file, instead of looking for one in your home -directory. +Use the specified mrconfig file. The default is B<~/.mrconfig> + +=item -p + +Search in the current directory, and its parent directories and use +the first B<.mrconfig> found, instead of the default B<~/.mrconfig>. =item -v Be verbose. -=back +=item -q + +Be quiet. + +=item -s + +Expand the statistics line displayed at the end to include information +about exactly which repositories failed and were skipped, if any. + +=item -i + +Interactive mode. If a repository fails to be processed, a subshell will be +started which you can use to resolve or investigate the problem. Exit the +subshell to continue the mr run. + +=item -n [number] -=head1 FILES +If no number if specified, just operate on the repository for the current +directory, do not recurse into deeper repositories. -B is configured by .mrconfig files. It starts by reading the .mrconfig -file in your home directory, and this can in turn chain load .mrconfig files -from repositories. +If a number is specified, will recurse into repositories at most that many +subdirectories deep. For example, with -n 2 it would recurse into ./src/foo, +but not ./src/packages/bar. + +=item -j [number] + +Run the specified number of jobs in parallel, or an unlimited number of jobs +with no number specified. This can greatly speed up operations such as updates. +It is not recommended for interactive operations. + +Note that running more than 10 jobs at a time is likely to run afoul of +ssh connection limits. Running between 3 and 5 jobs at a time will yield +a good speedup in updates without loading the machine too much. + +=item -t + +Trust all mrconfig files even if they are not listed in ~/.mrtrust. +Use with caution. + +=back + +=head1 "MRCONFIG FILES" Here is an example .mrconfig file: @@ -162,20 +266,29 @@ is an alias, and its value is the action to use. All other sections add repositories. The section header specifies the directory where the repository is located. This is relative to the directory that contains the mrconfig file, but you can also choose to use absolute -paths. +paths. (Note that you can use environment variables in section names; they +will be passed through the shell for expansion. For example, +"[$HOSTNAME]", or "[${HOSTNAME}foo]") Within a section, each parameter defines a shell command to run to handle a -given action. mr contains default handlers for the "update", "status", and -"commit" actions, so normally you only need to specify what to do for -"checkout". +given action. mr contains default handlers for "update", "status", +"commit", and other standard actions. Normally you only need to specify what +to do for "checkout". Note that these shell commands are run in a "set -e" shell environment, where any additional parameters you pass are available in "$@". The "checkout" command is run in the parent of the repository directory, since the repository isn't checked out yet. All other commands are run inside the repository, though not necessarily at the top of it. + The "MR_REPO" environment variable is set to the path to the top of the -repository. +repository. (For the "register" action, "MR_REPO" is instead set to the +basename of the directory that should be created when checking the +repository out.) + +The "MR_CONFIG" environment variable is set to the .mrconfig file +that defines the repo being acted on, or, if the repo is not yet in a config +file, the .mrconfig file that should be modified to register the repo. A few parameters have special meanings: @@ -183,7 +296,7 @@ A few parameters have special meanings: =item skip -If the "skip" parameter is set and its command returns nonzero, then B +If the "skip" parameter is set and its command returns true, then B will skip acting on that repository. The command is passed the action name in $1. @@ -192,22 +305,32 @@ mr is run by joey. The second uses the hours_since function (included in mr's built-in library) to skip updating the repo unless it's been at least 12 hours since the last update. - skip = test $(whoami) != joey - skip = [ "$1" = update ] && [ $(hours_since "$1") -lt 12 ] + skip = test `whoami` != joey + skip = [ "$1" = update ] && ! hours_since "$1" 12 + +=item order + +The "order" parameter can be used to override the default ordering of +repositories. The default order value is 10. Use smaller values to make +repositories be processed earlier, and larger values to make repositories +be processed later. + +Note that if a repository is located in a subdirectory of another +repository, ordering it to be processed earlier is not recommended. =item chain -If the "chain" parameter is set and its command returns nonzero, then B -will try to load a .mrconfig file from the root of the repository. (You -should avoid chaining from repositories with untrusted committers.) +If the "chain" parameter is set and its command returns true, then B +will try to load a .mrconfig file from the root of the repository. + +=item include -=item deleted +If the "include" parameter is set, its command is ran, and should output +additional mrconfig file content. The content is included as if it were +part of the including file. -If the "deleted" parameter is set and its command returns nonzero, then -B will treat the repository as deleted. It won't ever actually delete -the repository, but it will warn if it sees the repsoitory's directory. -This is useful when one mrconfig file is shared amoung multiple machines, -to keep track of and remember to delete old repositories. +Unlike all other parameters, this parameter does not need to be placed +within a section. =item lib @@ -217,9 +340,48 @@ to use. =back +When looking for a command to run for a given action, mr first looks for +a parameter with the same name as the action. If that is not found, it +looks for a parameter named "rcs_action" (substituting in the name of the +revision control system and the action). The name of the revision control +system is itself determined by running each defined "rcs_test" action, +until one succeeds. + +Internally, mr has settings for "git_update", "svn_update", etc. To change +the action that is performed for a given revision control system, you can +override these rcs specific actions. To add a new revision control system, +you can just add rcs specific actions for it. + +The ~/.mrlog file contains commands that mr has remembered to run later, +due to being offline. You can delete or edit this file to remove commands, +or even to add other commands for 'mr online' to run. If the file is +present, mr assumes it is in offline mode. + +=head "UNTRUSTED MRCONFIG FILES" + +Since mrconfig files can contain arbitrary shell commands, they can do +anything. This flexability is good, but it also allows a malicious mrconfig +file to delete your whole home directory. Such a file might be contained +inside a repository that your main ~/.mrconfig checks out and chains to. To +avoid worries about evil commands in a mrconfig file, mr +has the ability to read mrconfig files in untrusted mode. Such files are +limited to running only known safe commands (like "git clone") in a +carefully checked manner. + +By default, mr trusts all mrconfig files. (This default will change in a +future release!) But if you have a ~/.mrtrust file, mr will only trust +mrconfig files that are listed within it. (One file per line.) All other +files will be treated as untrusted. + +=head1 EXTENSIONS + +mr can be extended to support things such as unison and git-svn. Some +files providing such extensions are available in /usr/share/mr/. See +the documentation in the files for details about using them. + =head1 AUTHOR -Copyright 2007 Joey Hess +Copyright 2007-2009 Joey Hess Licensed under the GNU GPL version 2 or higher. @@ -232,224 +394,331 @@ use strict; use Getopt::Long; use Cwd qw(getcwd abs_path); -my $directory=getcwd(); -my $config="$ENV{HOME}/.mrconfig"; +# things that can happen when mr runs a command +use constant { + OK => 0, + FAILED => 1, + SKIPPED => 2, + ABORT => 3, +}; + +# configurables +my $config_overridden=0; my $verbose=0; +my $quiet=0; +my $stats=0; +my $interactive=0; +my $max_depth; +my $no_chdir=0; +my $jobs=1; +my $trust_all=0; +my $directory=getcwd(); +$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig"; + +# globals :-( my %config; +my %configfiles; my %knownactions; my %alias; +my (@ok, @failed, @skipped); -Getopt::Long::Configure("no_permute"); -my $result=GetOptions( - "d|directory=s" => sub { $directory=abs_path($_[1]) }, - "c|config=s" => \$config, - "verbose" => \$verbose, -); -if (! $result || @ARGV < 1) { - die("Usage: mr [-d directory] action [params ...]\n". - "(Use mr help for man page.)\n"); - -} +main(); -loadconfig(\*DATA); -loadconfig($config); -#use Data::Dumper; -#print Dumper(\%config); +my %rcs; +sub rcs_test { + my ($action, $dir, $topdir, $subdir) = @_; -eval { - use FindBin qw($Bin $Script); - $ENV{MR_PATH}=$Bin."/".$Script; -}; + if (exists $rcs{$dir}) { + return $rcs{$dir}; + } -# alias expansion and command stemming -my $action=shift @ARGV; -if (exists $alias{$action}) { - $action=$alias{$action}; -} -if (! exists $knownactions{$action}) { - my @matches = grep { /^\Q$action\E/ } - keys %knownactions, keys %alias; - if (@matches == 1) { - $action=$matches[0]; + my $test="set -e\n"; + foreach my $rcs_test ( + sort { + length $a <=> length $b + || + $a cmp $b + } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) { + my ($rcs)=$rcs_test=~/(.*)_test/; + $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test; + $test.="if my_$rcs_test; then echo $rcs; fi\n"; + } + $test=$config{$topdir}{$subdir}{lib}."\n".$test + if exists $config{$topdir}{$subdir}{lib}; + + print "mr $action: running rcs test >>$test<<\n" if $verbose; + my $rcs=`$test`; + chomp $rcs; + if ($rcs=~/\n/s) { + $rcs=~s/\n/, /g; + print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n"; + return undef; } - elsif (@matches == 0) { - die "mr: unknown action \"$action\" (known actions: ". - join(", ", sort keys %knownactions).")\n"; + if (! length $rcs) { + return $rcs{$dir}=undef; } else { - die "mr: ambiguous action \"$action\" (matches: ". - join(", ", @matches).")\n"; + return $rcs{$dir}=$rcs; } } - -if ($action eq 'help') { - exec($config{''}{DEFAULT}{$action}) || die "exec: $!"; -} -elsif ($action eq 'config') { - if (@ARGV < 2) { - die "mr config: not enough parameters\n"; - } - my $section=shift; - if ($section=~/^\//) { - # try to convert to a path relative to $config's dir - my ($dir)=$config=~/^(.*\/)[^\/]+$/; - if ($section=~/^\Q$dir\E(.*)/) { - $section=$1; - } + +sub findcommand { + my ($action, $dir, $topdir, $subdir, $is_checkout) = @_; + + if (exists $config{$topdir}{$subdir}{$action}) { + return $config{$topdir}{$subdir}{$action}; } - my %changefields; - foreach (@ARGV) { - if (/^([^=]+)=(.*)$/) { - $changefields{$1}=$2; - } - else { - my $found=0; - foreach my $topdir (sort keys %config) { - if (exists $config{$topdir}{$section} && - exists $config{$topdir}{$section}{$_}) { - print $config{$topdir}{$section}{$_}."\n"; - $found=1; - } - } - if (! $found) { - die "mr $action: $section $_ not set\n"; - } - } + + if ($is_checkout) { + return undef; } - modifyconfig($config, $section, %changefields) if %changefields; - exit 0; -} -elsif ($action eq 'register') { - my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n". - "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ". - join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); - print STDERR "mr $action: running >>$command<<\n" if $verbose; - exec($command) || die "exec: $!"; -} -# work out what repos to act on -my @repos; -my $nochdir=0; -foreach my $topdir (sort keys %config) { - foreach my $subdir (sort keys %{$config{$topdir}}) { - next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; - my $d=$directory; - $dir.="/" unless $dir=~/\/$/; - $d.="/" unless $d=~/\/$/; - next if $dir ne $directory && $dir !~ /^\Q$directory\E/; - push @repos, [$dir, $topdir, $subdir]; + my $rcs=rcs_test(@_); + + if (defined $rcs && + exists $config{$topdir}{$subdir}{$rcs."_".$action}) { + return $config{$topdir}{$subdir}{$rcs."_".$action}; } -} -if (! @repos) { - # fallback to find a leaf repo - LEAF: foreach my $topdir (reverse sort keys %config) { - foreach my $subdir (reverse sort keys %{$config{$topdir}}) { - next if $subdir eq 'DEFAULT'; - my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; - my $d=$directory; - $dir.="/" unless $dir=~/\/$/; - $d.="/" unless $d=~/\/$/; - if ($d=~/^\Q$dir\E/) { - push @repos, [$dir, $topdir, $subdir]; - last LEAF; - } - } + else { + return undef; } - $nochdir=1; -} - -my (@failed, @ok, @skipped); -foreach my $repo (@repos) { - action($action, @$repo); } sub action { my ($action, $dir, $topdir, $subdir) = @_; - my $lib= exists $config{$topdir}{$subdir}{lib} ? - $config{$topdir}{$subdir}{lib}."\n" : ""; + $ENV{MR_CONFIG}=$configfiles{$topdir}; + my $lib=exists $config{$topdir}{$subdir}{lib} ? + $config{$topdir}{$subdir}{lib}."\n" : ""; + my $is_checkout=($action eq 'checkout'); - if (exists $config{$topdir}{$subdir}{deleted}) { - if (! -d $dir) { - return; - } - else { - my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted}; - print "mr $action: running deleted test >>$test<<\n" if $verbose; - my $ret=system($test); - if ($ret >> 8 == 0) { - print STDERR "mr error: $dir should be deleted yet still exists\n\n"; - push @failed, $dir; - return; - } - } - } + $ENV{MR_REPO}=$dir; - if ($action eq 'checkout') { + if ($is_checkout) { if (-d $dir) { print "mr $action: $dir already exists, skipping checkout\n" if $verbose; - push @skipped, $dir; - return; + return SKIPPED; } + $dir=~s/^(.*)\/[^\/]+\/?$/$1/; } - elsif ($action eq 'update') { + elsif ($action =~ /update/) { if (! -d $dir) { return action("checkout", $dir, $topdir, $subdir); } } - - $ENV{MR_REPO}=$dir; - if (exists $config{$topdir}{$subdir}{skip}) { + my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout); + my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout); + + if (defined $skiptest) { my $test="set -e;".$lib. - "my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'"; + "my_action(){ $skiptest\n }; my_action '$action'"; print "mr $action: running skip test >>$test<<\n" if $verbose; my $ret=system($test); + if ($ret != 0) { + if (($? & 127) == 2) { + print STDERR "mr $action: interrupted\n"; + return ABORT; + } + elsif ($? & 127) { + print STDERR "mr $action: skip test received signal ".($? & 127)."\n"; + return ABORT; + } + } if ($ret >> 8 == 0) { print "mr $action: $dir skipped per config file\n" if $verbose; - push @skipped, $dir; - return; + return SKIPPED; } } - - if (! $nochdir && ! chdir($dir)) { + + if ($is_checkout && ! -d $dir) { + print "mr $action: creating parent directory $dir\n" if $verbose; + system("mkdir", "-p", $dir); + } + + if (! $no_chdir && ! chdir($dir)) { print STDERR "mr $action: failed to chdir to $dir: $!\n"; - push @failed, $dir; + return FAILED; } - elsif (! exists $config{$topdir}{$subdir}{$action}) { - print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n"; - push @skipped, $dir; + elsif (! defined $command) { + my $rcs=rcs_test(@_); + if (! defined $rcs) { + print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n"; + return FAILED; + } + else { + print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n"; + return SKIPPED; + } } else { - if (! $nochdir) { - print "mr $action: $topdir$subdir\n"; + if (! $no_chdir) { + print "mr $action: $topdir$subdir\n" unless $quiet; } else { - print "mr $action: $topdir$subdir (in subdir $directory)\n"; + my $s=$directory; + $s=~s/^\Q$topdir$subdir\E\/?//; + print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet; } - my $command="set -e; ".$lib. - "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ". + $command="set -e; ".$lib. + "my_action(){ $command\n }; my_action ". join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); - print STDERR "mr $action: running >>$command<<\n" if $verbose; + print "mr $action: running >>$command<<\n" if $verbose; my $ret=system($command); if ($ret != 0) { + if (($? & 127) == 2) { + print STDERR "mr $action: interrupted\n"; + return ABORT; + } + elsif ($? & 127) { + print STDERR "mr $action: received signal ".($? & 127)."\n"; + return ABORT; + } print STDERR "mr $action: failed ($ret)\n" if $verbose; - push @failed, $dir; if ($ret >> 8 != 0) { print STDERR "mr $action: command failed\n"; + if (-e "$ENV{HOME}/.mrlog" && $action ne 'remember') { + # recreate original command line to + # remember, and avoid recursing + my @orig=@ARGV; + @ARGV=('-n', $action, @orig); + action("remember", $dir, $topdir, $subdir); + @ARGV=@orig; + } } elsif ($ret != 0) { print STDERR "mr $action: command died ($ret)\n"; } + return FAILED; } else { - push @ok, $dir; + if ($action eq 'checkout' && ! -d $dir) { + print STDERR "mr $action: $dir missing after checkout\n";; + return FAILED; + } + + return OK; + } + } +} + +# run actions on multiple repos, in parallel +sub mrs { + my $action=shift; + my @repos=@_; + + $| = 1; + my @active; + my @fhs; + my @out; + my $running=0; + while (@fhs or @repos) { + while ((!$jobs || $running < $jobs) && @repos) { + $running++; + my $repo = shift @repos; + pipe(my $outfh, CHILD_STDOUT); + pipe(my $errfh, CHILD_STDERR); + my $pid; + unless ($pid = fork) { + die "mr $action: cannot fork: $!" unless defined $pid; + open(STDOUT, ">&CHILD_STDOUT") || die "mr $action cannot reopen stdout: $!"; + open(STDERR, ">&CHILD_STDERR") || die "mr $action cannot reopen stderr: $!"; + close CHILD_STDOUT; + close CHILD_STDERR; + close $outfh; + close $errfh; + exit action($action, @$repo); + } + close CHILD_STDOUT; + close CHILD_STDERR; + push @active, [$pid, $repo]; + push @fhs, [$outfh, $errfh]; + push @out, ['', '']; + } + my ($rin, $rout) = ('',''); + my $nfound; + foreach my $fh (@fhs) { + next unless defined $fh; + vec($rin, fileno($fh->[0]), 1) = 1 if defined $fh->[0]; + vec($rin, fileno($fh->[1]), 1) = 1 if defined $fh->[1]; } + $nfound = select($rout=$rin, undef, undef, 1); + foreach my $channel (0, 1) { + foreach my $i (0..$#fhs) { + next unless defined $fhs[$i]; + my $fh = $fhs[$i][$channel]; + next unless defined $fh; + if (vec($rout, fileno($fh), 1) == 1) { + my $r = ''; + if (sysread($fh, $r, 1024) == 0) { + close($fh); + $fhs[$i][$channel] = undef; + if (! defined $fhs[$i][0] && + ! defined $fhs[$i][1]) { + waitpid($active[$i][0], 0); + print STDOUT $out[$i][0]; + print STDERR $out[$i][1]; + record($active[$i][1], $? >> 8); + splice(@fhs, $i, 1); + splice(@active, $i, 1); + splice(@out, $i, 1); + $running--; + } + } + $out[$i][$channel] .= $r; + } + } + } + } +} +sub record { + my $dir=shift()->[0]; + my $ret=shift; + + if ($ret == OK) { + push @ok, $dir; + print "\n"; + } + elsif ($ret == FAILED) { + if ($interactive) { + chdir($dir) unless $no_chdir; + print STDERR "mr: Starting interactive shell. Exit shell to continue.\n"; + system((getpwuid($<))[8]); + } + push @failed, $dir; print "\n"; } + elsif ($ret == SKIPPED) { + push @skipped, $dir; + } + elsif ($ret == ABORT) { + exit 1; + } + else { + die "unknown exit status $ret"; + } +} + +sub showstats { + my $action=shift; + if (! @ok && ! @failed && ! @skipped) { + die "mr $action: no repositories found to work on\n"; + } + print "mr $action: finished (".join("; ", + showstat($#ok+1, "ok", "ok"), + showstat($#failed+1, "failed", "failed"), + showstat($#skipped+1, "skipped", "skipped"), + ).")\n" unless $quiet; + if ($stats) { + if (@skipped) { + print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet; + } + if (@failed) { + print STDERR "mr $action: (failed: ".join(" ", @failed).")\n"; + } + } } sub showstat { @@ -461,21 +730,191 @@ sub showstat { } return; } -if (! @ok && ! @failed && ! @skipped) { - die "mr $action: no repositories found to work on\n"; + +# an ordered list of repos +sub repolist { + my @list; + foreach my $topdir (sort keys %config) { + foreach my $subdir (sort keys %{$config{$topdir}}) { + push @list, { + topdir => $topdir, + subdir => $subdir, + order => $config{$topdir}{$subdir}{order}, + }; + } + } + return sort { + $a->{order} <=> $b->{order} + || + $a->{topdir} cmp $b->{topdir} + || + $a->{subdir} cmp $b->{subdir} + } @list; +} + +# figure out which repos to act on +sub selectrepos { + my @repos; + foreach my $repo (repolist()) { + my $topdir=$repo->{topdir}; + my $subdir=$repo->{subdir}; + + next if $subdir eq 'DEFAULT'; + my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $d=$directory; + $dir.="/" unless $dir=~/\/$/; + $d.="/" unless $d=~/\/$/; + next if $dir ne $d && $dir !~ /^\Q$d\E/; + if (defined $max_depth) { + my @a=split('/', $dir); + my @b=split('/', $d); + do { } while (@a && @b && shift(@a) eq shift(@b)); + next if @a > $max_depth || @b > $max_depth; + } + push @repos, [$dir, $topdir, $subdir]; + } + if (! @repos) { + # fallback to find a leaf repo + foreach my $repo (reverse repolist()) { + my $topdir=$repo->{topdir}; + my $subdir=$repo->{subdir}; + + next if $subdir eq 'DEFAULT'; + my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir; + my $d=$directory; + $dir.="/" unless $dir=~/\/$/; + $d.="/" unless $d=~/\/$/; + if ($d=~/^\Q$dir\E/) { + push @repos, [$dir, $topdir, $subdir]; + last; + } + } + $no_chdir=1; + } + return @repos; +} + +sub expandenv { + my $val=shift; + + + if ($val=~/\$/) { + $val=`echo "$val"`; + chomp $val; + } + + return $val; } -print "mr $action: finished (".join("; ", - showstat($#ok+1, "ok", "ok"), - showstat($#failed+1, "failed", "failed"), - showstat($#skipped+1, "skipped", "skipped"), -).")\n"; -if (@failed) { - exit 1; + +my %trusted; +sub is_trusted_config { + my $config=shift; # must be abs_pathed already + + # We always trust ~/.mrconfig. + return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig"); + + return 1 if $trust_all; + + my $trustfile=$ENV{HOME}."/.mrtrust"; + + if (! -e $trustfile) { + print "mr: Assuming $config is trusted.\n"; + print "mr: For better security, you are encouraged to create ~/.mrtrust\n"; + print "mr: and list all trusted mrconfig files in it.\n"; + return 1; + } + + if (! %trusted) { + $trusted{"$ENV{HOME}/.mrconfig"}=1; + open (TRUST, "<", $trustfile) || die "$trustfile: $!"; + while () { + chomp; + s/^~\//$ENV{HOME}\//; + $trusted{abs_path($_)}=1; + } + close TRUST; + } + + return $trusted{$config}; +} + + +sub is_trusted_repo { + my $repo=shift; + + # Tightly limit what is allowed in a repo name. + # No ../, no absolute paths, and no unusual filenames + # that might try to escape to the shell. + return $repo =~ /^[-_.+\/A-Za-z0-9]+$/ && + $repo !~ /\.\./ && $repo !~ /^\//; } -elsif (! @ok && @skipped) { - exit 1; + +sub is_trusted_checkout { + my $command=shift; + + # To determine if the command is safe, compare it with the + # *_trusted_checkout config settings. Those settings are + # templates for allowed commands, so make sure that each word + # of the command matches the corresponding word of the template. + + my @words; + foreach my $word (split(' ', $command)) { + # strip quoting + if ($word=~/^'(.*)'$/) { + $word=$1; + } + elsif ($word=~/^"(.*)"$/) { + $word=$1; + } + + push @words, $word; + } + + foreach my $key (grep { /_trusted_checkout$/ } + keys %{$config{''}{DEFAULT}}) { + my @twords=split(' ', $config{''}{DEFAULT}{$key}); + next if @words > @twords; + + my $match=1; + my $url; + for (my $c=0; $c < @twords && $match; $c++) { + if ($twords[$c] eq '$url') { + # Match all the typical characters found in + # urls, plus @ which svn can use. Note + # that the "url" might also be a local + # directory. + $match=( + defined $words[$c] && + $words[$c] =~ /^[-_.+:@\/A-Za-z0-9]+$/ + ); + $url=$words[$c]; + } + elsif ($twords[$c] eq '$repo') { + # If a repo is not specified, assume it + # will be the last path component of the + # url, or something derived from it, and + # check that. + if (! defined $words[$c] && defined $url) { + ($words[$c])=$url=~/\/([^\/]+)\/?$/; + } + + $match=( + defined $words[$c] && + is_trusted_repo($words[$c]) + ); + } + elsif (defined $words[$c] && $twords[$c] eq $words[$c]) { + $match=1; + } + else { + $match=0; + } + } + return 1 if $match; + } + + return 0; } -exit 0; my %loaded; sub loadconfig { @@ -485,9 +924,11 @@ sub loadconfig { my $in; my $dir; + my $trusted; if (ref $f eq 'GLOB') { $dir=""; - $in=$f; + $in=$f; + $trusted=1; } else { if (! -e $f) { @@ -500,15 +941,24 @@ sub loadconfig { } $loaded{$absf}=1; + $trusted=is_trusted_config($absf); + ($dir)=$f=~/^(.*\/)[^\/]+$/; if (! defined $dir) { $dir="."; } $dir=abs_path($dir)."/"; + + if (! exists $configfiles{$dir}) { + $configfiles{$dir}=$f; + } # copy in defaults from first parent my $parent=$dir; - while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) { + while ($parent=~s/^(.*\/)[^\/]+\/?$/$1/) { + if ($parent eq '/') { + $parent=""; + } if (exists $config{$parent} && exists $config{$parent}{DEFAULT}) { $config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} }; @@ -523,12 +973,23 @@ sub loadconfig { close $in; my $section; + my $line=0; while (@lines) { $_=shift @lines; + $line++; chomp; next if /^\s*\#/ || /^\s*$/; if (/^\[([^\]]*)\]\s*$/) { $section=$1; + + if (! $trusted) { + if (! is_trusted_repo($section) || + $section eq 'ALIAS' || + $section eq 'DEFAULT') { + die "mr: illegal section \"[$section]\" in untrusted $f line $line\n"; + } + } + $section=expandenv($section) if $trusted; } elsif (/^(\w+)\s*=\s*(.*)/) { my $parameter=$1; @@ -537,10 +998,31 @@ sub loadconfig { # continued value while (@lines && $lines[0]=~/^\s(.+)/) { shift(@lines); + $line++; $value.="\n$1"; chomp $value; } + if (! $trusted) { + # Untrusted files can only contain checkout + # parameters. + if ($parameter ne 'checkout') { + die "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line\n"; + } + if (! is_trusted_checkout($value)) { + die "mr: illegal checkout command \"$value\" in untrusted $f line $line\n"; + } + } + + if ($parameter eq "include") { + print "mr: including output of \"$value\"\n" if $verbose; + unshift @lines, `$value`; + if ($?) { + print STDERR "mr: include command exited nonzero ($?)\n"; + } + next; + } + if (! defined $section) { die "$f line $.: parameter ($parameter) not in section\n"; } @@ -558,17 +1040,33 @@ sub loadconfig { } else { $config{$dir}{$section}{$parameter}=$value; - $knownactions{$parameter}=1; + if ($parameter =~ /.*_(.*)/) { + $knownactions{$1}=1; + } + else { + $knownactions{$parameter}=1; + } if ($parameter eq 'chain' && length $dir && $section ne "DEFAULT" && - -e $dir.$section."/.mrconfig" && - system($value) >> 8 == 0) { - push @toload, $dir.$section."/.mrconfig"; + -e $dir.$section."/.mrconfig") { + my $ret=system($value); + if ($ret != 0) { + if (($? & 127) == 2) { + print STDERR "mr: chain test interrupted\n"; + exit 2; + } + elsif ($? & 127) { + print STDERR "mr: chain test received signal ".($? & 127)."\n"; + } + } + else { + push @toload, $dir.$section."/.mrconfig"; + } } } } else { - die "$f line $.: parse error\n"; + die "$f line $line: parse error\n"; } } @@ -628,7 +1126,7 @@ sub modifyconfig { $addfields->(); } - $section=$1; + $section=expandenv($1); push @out, $_; } @@ -674,6 +1172,255 @@ sub modifyconfig { close $out; } +sub dispatch { + my $action=shift; + + # actions that do not operate on all repos + if ($action eq 'help') { + help(@ARGV); + } + elsif ($action eq 'config') { + config(@ARGV); + } + elsif ($action eq 'register') { + register(@ARGV); + } + elsif ($action eq 'bootstrap') { + bootstrap(); + } + elsif ($action eq 'remember' || + $action eq 'offline' || + $action eq 'online') { + my @repos=selectrepos; + action($action, @{$repos[0]}) if @repos; + exit 0; + } + + if (!$jobs || $jobs > 1) { + mrs($action, selectrepos()); + } + else { + foreach my $repo (selectrepos()) { + record($repo, action($action, @$repo)); + } + } +} + +sub help { + exec($config{''}{DEFAULT}{help}) || die "exec: $!"; +} + +sub config { + if (@_ < 2) { + die "mr config: not enough parameters\n"; + } + my $section=shift; + if ($section=~/^\//) { + # try to convert to a path relative to the config file + my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/; + $dir=abs_path($dir); + $dir.="/" unless $dir=~/\/$/; + if ($section=~/^\Q$dir\E(.*)/) { + $section=$1; + } + } + my %changefields; + foreach (@_) { + if (/^([^=]+)=(.*)$/) { + $changefields{$1}=$2; + } + else { + my $found=0; + foreach my $topdir (sort keys %config) { + if (exists $config{$topdir}{$section} && + exists $config{$topdir}{$section}{$_}) { + print $config{$topdir}{$section}{$_}."\n"; + $found=1; + last if $section eq 'DEFAULT'; + } + } + if (! $found) { + die "mr config: $section $_ not set\n"; + } + } + } + modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields; + exit 0; +} + +sub register { + if ($config_overridden) { + # Find the directory that the specified config file is + # located in. + ($directory)=abs_path($ENV{MR_CONFIG})=~/^(.*\/)[^\/]+$/; + } + else { + # Find the closest known mrconfig file to the current + # directory. + $directory.="/" unless $directory=~/\/$/; + my $foundconfig=0; + foreach my $topdir (reverse sort keys %config) { + next unless length $topdir; + if ($directory=~/^\Q$topdir\E/) { + $ENV{MR_CONFIG}=$configfiles{$topdir}; + $directory=$topdir; + $foundconfig=1; + last; + } + } + if (! $foundconfig) { + $directory=""; # no config file, use builtin + } + } + if (@ARGV) { + my $subdir=shift @ARGV; + if (! chdir($subdir)) { + print STDERR "mr register: failed to chdir to $subdir: $!\n"; + } + } + + $ENV{MR_REPO}=getcwd(); + my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT', 0); + if (! defined $command) { + die "mr register: unknown repository type\n"; + } + + $ENV{MR_REPO}=~s/.*\/(.*)/$1/; + $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n". + "my_action(){ $command\n }; my_action ". + join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV); + print "mr register: running >>$command<<\n" if $verbose; + exec($command) || die "exec: $!"; +} + +sub bootstrap { + my $url=shift @ARGV; + + if (! defined $url || ! length $url) { + die "mr: bootstrap requires url\n"; + } + + if (-e ".mrconfig") { + die "mr: .mrconfig file already exists, not overwriting with $url\n"; + } + + if (system("curl", "-s", $url, "-o", ".mrconfig") != 0) { + die "mr: download of $url failed\n"; + } + + exec("mr $ENV{MR_SWITCHES} -c .mrconfig checkout"); + die "failed to run mr checkout"; +} + +# alias expansion and command stemming +sub expandaction { + my $action=shift; + if (exists $alias{$action}) { + $action=$alias{$action}; + } + if (! exists $knownactions{$action}) { + my @matches = grep { /^\Q$action\E/ } + keys %knownactions, keys %alias; + if (@matches == 1) { + $action=$matches[0]; + } + elsif (@matches == 0) { + die "mr: unknown action \"$action\" (known actions: ". + join(", ", sort keys %knownactions).")\n"; + } + else { + die "mr: ambiguous action \"$action\" (matches: ". + join(", ", @matches).")\n"; + } + } + return $action; +} + +sub find_nearest_mrconfig { + my $dir=getcwd(); + while (length $dir) { + if (-e "$dir/.mrconfig") { + return "$dir/.mrconfig"; + } + $dir=~s/\/[^\/]*$//; + } + die "no .mrconfig found in path\n"; +} + +sub getopts { + my @saved=@ARGV; + Getopt::Long::Configure("bundling", "no_permute"); + my $result=GetOptions( + "d|directory=s" => sub { $directory=abs_path($_[1]) }, + "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 }, + "p|path" => sub { $ENV{MR_CONFIG}=find_nearest_mrconfig(); $config_overridden=1 }, + "v|verbose" => \$verbose, + "q|quiet" => \$quiet, + "s|stats" => \$stats, + "i|interactive" => \$interactive, + "n|no-recurse:i" => \$max_depth, + "j|jobs:i" => \$jobs, + "t|trust-all" => \$trust_all, + ); + if (! $result || @ARGV < 1) { + die("Usage: mr [options] action [params ...]\n". + "(Use mr help for man page.)\n"); + } + + $ENV{MR_SWITCHES}=""; + foreach my $option (@saved) { + last if $option eq $ARGV[0]; + $ENV{MR_SWITCHES}.="$option "; + } +} + +sub init { + $SIG{INT}=sub { + print STDERR "mr: interrupted\n"; + exit 2; + }; + + # This can happen if it's run in a directory that was removed + # or other strangeness. + if (! defined $directory) { + die("mr: failed to determine working directory\n"); + } + # Make sure MR_CONFIG is an absolute path, but don't use abs_path since + # the config file might be a symlink to elsewhere, and the directory it's + # in is significant. + if ($ENV{MR_CONFIG} !~ /^\//) { + $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG}; + } + # Try to set MR_PATH to the path to the program. + eval { + use FindBin qw($Bin $Script); + $ENV{MR_PATH}=$Bin."/".$Script; + }; +} + +sub main { + getopts(); + init(); + + loadconfig(\*DATA); + loadconfig($ENV{MR_CONFIG}); + #use Data::Dumper; print Dumper(\%config); + + my $action=expandaction(shift @ARGV); + dispatch($action); + showstats($action); + + if (@failed) { + exit 1; + } + elsif (! @ok && @skipped) { + exit 1; + } + else { + exit 0; + } +} + # Finally, some useful actions that mr knows about by default. # These can be overridden in ~/.mrconfig. __DATA__ @@ -683,13 +1430,23 @@ ci = commit ls = list [DEFAULT] +order = 10 lib = error() { echo "mr: $@" >&2 exit 1 } + warning() { + echo "mr (warning): $@" >&2 + } + info() { + echo "mr: $@" >&2 + } hours_since() { - for dir in .git .svn .bzr CVS; do + if [ -z "$1" ] || [ -z "$2" ]; then + error "mr: usage: hours_since action num" + fi + for dir in .git .svn .bzr CVS .hg _darcs; do if [ -e "$MR_REPO/$dir" ]; then flagfile="$MR_REPO/$dir/.mr_last$1" break @@ -698,106 +1455,167 @@ lib = if [ -z "$flagfile" ]; then error "cannot determine flag filename" fi - perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile" - touch "$flagfile" - } - -update = - if [ -d "$MR_REPO"/.svn ]; then - svn update "$@" - elif [ -d "$MR_REPO"/.git ]; then - git pull origin master "$@" - elif [ -d "$MR_REPO"/.bzr ]; then - bzr merge "$@" - elif [ -d "$MR_REPO"/CVS ]; then - cvs update "$@" - else - error "unknown repo type" - fi -status = - if [ -d "$MR_REPO"/.svn ]; then - svn status "$@" - elif [ -d "$MR_REPO"/.git ]; then - git status "$@" || true - elif [ -d "$MR_REPO"/.bzr ]; then - bzr status "$@" - elif [ -d "$MR_REPO"/CVS ]; then - cvs status "$@" - else - error "unknown repo type" - fi -commit = - if [ -d "$MR_REPO"/.svn ]; then - svn commit "$@" - elif [ -d "$MR_REPO"/.git ]; then - git commit -a "$@" && git push --all - elif [ -d "$MR_REPO"/.bzr ]; then - bzr commit "$@" && bzr push - elif [ -d "$MR_REPO"/CVS ]; then - cvs commit "$@" - else - error "unknown repo type" - fi -diff = - if [ -d "$MR_REPO"/.svn ]; then - svn diff "$@" - elif [ -d "$MR_REPO"/.git ]; then - git diff "$@" - elif [ -d "$MR_REPO"/.bzr ]; then - bzr diff "$@" - elif [ -d "$MR_REPO"/CVS ]; then - cvs diff "$@" - else - error "unknown repo type" + delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"` + if [ "$delta" -lt "$2" ]; then + exit 0 + else + touch "$flagfile" + exit 1 + fi + } + +svn_test = test -d "$MR_REPO"/.svn +git_test = test -d "$MR_REPO"/.git +bzr_test = test -d "$MR_REPO"/.bzr +cvs_test = test -d "$MR_REPO"/CVS +hg_test = test -d "$MR_REPO"/.hg +darcs_test = test -d "$MR_REPO"/_darcs +git_bare_test = + test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags && + test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config && + test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true + +svn_update = svn update "$@" +git_update = git pull "$@" +bzr_update = bzr merge --pull "$@" +cvs_update = cvs update "$@" +hg_update = hg pull "$@" && hg update "$@" +darcs_update = darcs pull -a "$@" + +svn_status = svn status "$@" +git_status = git status "$@" || true +bzr_status = bzr status "$@" +cvs_status = cvs status "$@" +hg_status = hg status "$@" +darcs_status = darcs whatsnew -ls "$@" || true + +svn_commit = svn commit "$@" +git_commit = git commit -a "$@" && git push --all +bzr_commit = bzr commit "$@" && bzr push +cvs_commit = cvs commit "$@" +hg_commit = hg commit -m "$@" && hg push +darcs_commit = darcs record -a -m "$@" && darcs push -a + +git_record = git commit -a "$@" +bzr_record = bzr commit "$@" +hg_record = hg commit -m "$@" +darcs_record = darcs record -a -m "$@" + +svn_push = : +git_push = git push "$@" +bzr_push = bzr push "$@" +cvs_push = : +hg_push = hg push "$@" +darcs_push = darcs push -a "$@" + +svn_diff = svn diff "$@" +git_diff = git diff "$@" +bzr_diff = bzr diff "$@" +cvs_diff = cvs diff "$@" +hg_diff = hg diff "$@" +darcs_diff = darcs diff -u "$@" + +svn_log = svn log "$@" +git_log = git log "$@" +bzr_log = bzr log "$@" +cvs_log = cvs log "$@" +hg_log = hg log "$@" +darcs_log = darcs changes "$@" +git_bare_log = git log "$@" + +svn_register = + url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2` + if [ -z "$url" ]; then + error "cannot determine svn url" fi -log = - if [ -d "$MR_REPO"/.svn ]; then - svn log"$@" - elif [ -d "$MR_REPO"/.git ]; then - git log "$@" - elif [ -d "$MR_REPO"/.bzr ]; then - bzr log "$@" - elif [ -d "$MR_REPO"/CVS ]; then - cvs log "$@" - else - error "unknown repo type" + echo "Registering svn url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'" +git_register = + url="`LC_ALL=C git config --get remote.origin.url`" || true + if [ -z "$url" ]; then + error "cannot determine git url" fi -register = - if [ -n "$1" ]; then - cd "$1" + echo "Registering git url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'" +bzr_register = + url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`" + if [ -z "$url" ]; then + error "cannot determine bzr url" fi - basedir="$(basename $(pwd))" - if [ -d .svn ]; then - url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2) - if [ -z "$url" ]; then - error "cannot determine svn url" + echo "Registering bzr url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'" +cvs_register = + repo=`cat CVS/Repository` + root=`cat CVS/Root` + if [ -z "$root" ]; then + error "cannot determine cvs root" fi - echo "Registering svn url: $url" - mr config "$(pwd)" checkout="svn co $url $basedir" - elif [ -d .git ]; then - url=$(LANG=C git-config --get remote.origin.url) - if [ -z "$url" ]; then - error "cannot determine git url" - fi - echo "Registering git url: $url" - mr config "$(pwd)" checkout="git clone $url $basedir" - elif [ -d .bzr ]; then - url=$(cat .bzr/branch/parent) - if [ -z "$url" ]; then - error "cannot determine bzr url" - fi - echo "Registering bzr url: $url" - mr config "$(pwd)" checkout="bzr clone $url $basedir" - else - error "unable to register this repo type" + echo "Registering cvs repository $repo at root $root" + mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'" +hg_register = + url=`hg showconfig paths.default` + echo "Registering mercurial repo url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'" +darcs_register = + url=`cat _darcs/prefs/defaultrepo` + echo "Registering darcs repository $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url' '$MR_REPO'" +git_bare_register = + url="`LC_ALL=C GIT_CONFIG=config git config --get remote.origin.url`" || true + if [ -z "$url" ]; then + error "cannot determine git url" fi + echo "Registering git url: $url in $MR_CONFIG" + mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'" + +svn_trusted_checkout = svn co $url $repo +svn_alt_trusted_checkout = svn checkout $url $repo +git_trusted_checkout = git clone $url $repo +bzr_trusted_checkout = bzr clone $url $repo +# cvs: too hard +hg_trusted_checkout = hg clone $url $repo +darcs_trusted_checkout = darcs get $url $repo +git_bare_trusted_checkout = git clone --bare $url $repo + help = if [ ! -e "$MR_PATH" ]; then error "cannot find program path" fi - (pod2man -c mr "$MR_PATH" | man -l -) || error "pod2man or man failed" + tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed" + trap "rm -f $tmp" exit + pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed" + man -l "$tmp" || error "man failed" list = true config = +bootstrap = + +online = + if [ -s ~/.mrlog ]; then + info "running offline commands" + mv -f ~/.mrlog ~/.mrlog.old + if ! sh -e ~/.mrlog.old; then + error "offline command failed; left in ~/.mrlog.old" + fi + rm -f ~/.mrlog.old + else + info "no offline commands to run" + fi +offline = + umask 077 + touch ~/.mrlog + info "offline mode enabled" +remember = + info "remembering command: 'mr $@'" + command="mr -d '$(pwd)' $MR_SWITCHES" + for w in "$@"; do + command="$command '$w'" + done + if [ ! -e ~/.mrlog ] || ! grep -q -F "$command" ~/.mrlog; then + echo "$command" >> ~/.mrlog + fi ed = echo "A horse is a horse, of course, of course.." T = echo "I pity the fool." +right = echo "Not found." + +# vim:sw=8:sts=0:ts=8:noet