X-Git-Url: https://git.madduck.net/code/vcsh.git/blobdiff_plain/0af8c82fed06f635e0a8dfa25b26c97a7932af51..310a7c48c640f7a713635c1c81527d21aabb5975:/README.md?ds=sidebyside diff --git a/README.md b/README.md index 4263ad0..f641ce9 100644 --- a/README.md +++ b/README.md @@ -1,106 +1,389 @@ -vcsh - manage and sync config files via git +vcsh - manage config files in $HOME via fake bare git repositories -# Introduction # +# Index # -vcsh allows you to have several git repositories, all maintaining their working trees in $HOME without clobbering each other. -That, in turn, means you can have one repository per config set (zsh, vim, ssh, etc), picking and choosing which configs you want to use on which machine. +1. Contact +2. Introduction +3. Overview +4. Getting Started +5. Usage -vcsh was designed with mr [1] in mind so you might want to install that, as well. +# 1 Contact # -Read INSTALL.md for detailed setup instructions. +There are several ways to get in touch with the author and a small but committed +community around the general idea of version controlling your (digital) life. -Questions? RichiH@{Freenode,OFTC,IRCnet} +* IRC: #vcs-home on irc.oftc.net -## Comparison to Other Solutions ## +* Mailing list: [http://lists.madduck.net/listinfo/vcs-home][vcs-home-list] -Most people who decide to put their dotfiles under version control start with a **single repository in $HOME**, adding all their dotfiles (and possibly more) to it. -This works, of course, but can become a nuisance as soon as you try to manage more than one host. +* Pull requests or issues on [https://github.com/RichiH/vcsh][vcsh] -The next logical step is to create single-purpose repositories in, for example, ~/.dotfiles and to create **symbolic links in $HOME**. -This gives you the flexibility to check out only certain repositories on different hosts. -The downsides of this approach are the necessary manual steps of cloning and symlinking the individual repositories. -It will probably become a nuisance when you try to manage more than two hosts. +# 2 Introduction # -vcsh takes this second approach one step further. -It expects single-purpose repositories and stores them in a hidden directory (similar to ~/.dotfiles). -However, it does not create symbolic links in $HOME; it puts the actual files right into $HOME. +[vcsh][vcsh] allows you to maintain several git repositories in one single +directory. They all maintain their working trees without clobbering each other +or interfering otherwise. By default, all git repositories maintained via +`vcsh` are stored in <$HOME> but you can override this setting if you want to. +All that means that you can have one repository per application or application +family, i.e. `zsh`, `vim`, `ssh`, etc. This, in turn, allows you to clone +custom sets of configurations onto different machines or even for different +users; picking and mixing which configurations you want to use where. +For example, you may not need to have your `mplayer` configuration on a server +or available to root and you may want to maintain different configuration for +`ssh` on your personal and your work machines. -Furthermore, by making use of mr [1], it makes it very easy to enable/disable and clone a large number of repositories. +`vcsh` was designed with [mr][mr] in mind so you might want to install that, as +well. -## Default Directory Layout ## +Read and for instructions specific to your operating +system. + +The following overview will try to give you an idea of the use cases and +advantages of `vcsh`. See sections 3 and 4 for detailed instructions and +examples. + +## 2.1 Talks ## + +Some people found it useful to look at slides and videos explaining how `vcsh` +works. +They can all be found [on the author's talk page][talks]. + +# 3 Overview + +## 3.1 Comparison to Other Solutions ## + +Most people who decide to put their dotfiles under version control start with a +single repository in <$HOME>, adding all their dotfiles (and possibly more) +to it. This works, of course, but can become a nuisance as soon as you try to +manage more than one host. + +The next logical step is to create single-purpose repositories in, for example, +<~/.dotfiles> and to create symbolic links into <$HOME>. This gives you the +flexibility to check out only certain repositories on different hosts. The +downsides of this approach are the necessary manual steps of cloning and +symlinking the individual repositories. + +`vcsh` takes this second approach one step further. It expects +single-purpose repositories and stores them in a hidden directory (similar +to <~/.dotfiles>). However, it does not create symbolic links in <$HOME>; it +puts the actual files right into <$HOME>. + +Furthermore, by making use of [mr][mr], it makes it very easy to enable/disable +and clone a large number of repositories. The use of `mr` is technically +optional (see section 4.3), but it will be an integral part of the proposed +system that follows. + +## 3.2 Default Directory Layout ## To illustrate, this is what a possible directory structure looks like. - $HOME - |-- .config - | |-- mr - | | |-- available.d - | | | |-- zsh.vcsh - | | | |-- gitconfigs.vcsh - | | | |-- lftp.vcsh - | | | |-- offlineimap.vcsh - | | | |-- s3cmd.vcsh - | | | |-- tmux.vcsh - | | | |-- vim.vcsh - | | | |-- vimperator.vcsh - | | | |-- snippets.git - | | |-- config.d - | | | |-- zsh.mrconfig -> ../available.d/zsh.mrconfig - | | | |-- gitconfigs.mrconfig -> ../available.d/gitconfigs.mrconfig - | | | |-- tmux.mrconfig -> ../available.d/tmux.mrconfig - | | | `-- vim.mrconfig -> ../available.d/vim.mrconfig - | `-- vcsh - | `-- repo.d - | |-- zsh.git -----------+ - | |-- gitconfigs.git | - | |-- tmux.git | - | `-- vim.git | - |-- [...] | - |-- .zshrc <----------------------+ - |-- .gitignore - |-- .mrconfig - `-- .mrtrust - -In this setup, ~/.mrconfig looks like: - - [DEFAULT] - jobs = 5 - include = cat ~/.config/mr/config.d/* - -The files you see in ~/.config/mr/available.d are mr configuration files that contain the commands to manage (checkout, update etc.) a single repository. -vcsh repo configs end in .vcsh, git configs end in .git, etc. This is optional and your preference. -For example, this is what a zsh.mrconfig with read-only access to my zshrc repo looks likes. I.e. in this specific example, push can not work. - - [$HOME/.config/vcsh/repo.d/zsh.git] - checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' - update = vcsh run bash git pull - push = vcsh run bash git push - status = vcsh run bash git status - -~/.config/mr/available.d contains *all available* repositories. -Only files/links present in mr/config.d, however, will be used by mr. -That means that in this example, only the zsh, gitconfigs, tmux and vim repositories will be checked out. -A simple `mr update` run in $HOME will clone or update those four repositories listed in config.d. - -~/.config/vcsh/repo.d is the directory where vcsh clones the git repositories into. -Since their working trees are configured to be in $HOME, the files contained in those repositories will be put in $HOME directly (see .bashrc above). - -vcsh will check if any file it would want to create exists. If it exists, vcsh will throw a warning and exit. Move away your old config and try again. Optionally, merge your local and your global configs afterwards and push with `vcsh run foo git push`. - -## Moving into a New Host ## - -To illustrate further, the following steps could move your desired configuration to a new host. - -1. Clone the mr repository (containing available.d, config.d etc.), for example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git` -2. Choose your repositories by linking them in config.d (or go with the default you may have already configured by adding symlinks to git). -3. Run mr to clone the repositories: `cd; mr update`. -4. Done. + $HOME + |-- $XDG_CONFIG_HOME (defaults to $HOME/.config) + | |-- mr + | | |-- available.d + | | | |-- zsh.vcsh + | | | |-- gitconfigs.vcsh + | | | |-- lftp.vcsh + | | | |-- offlineimap.vcsh + | | | |-- s3cmd.vcsh + | | | |-- tmux.vcsh + | | | |-- vim.vcsh + | | | |-- vimperator.vcsh + | | | `-- snippets.git + | | `-- config.d + | | |-- zsh.vcsh -> ../available.d/zsh.vcsh + | | |-- gitconfigs.vcsh -> ../available.d/gitconfigs.vcsh + | | |-- tmux.vcsh -> ../available.d/tmux.vcsh + | | `-- vim.vcsh -> ../available.d/vim.vcsh + | `-- vcsh + | |-- config + | `-- repo.d + | |-- zsh.git -----------+ + | |-- gitconfigs.git | + | |-- tmux.git | + | `-- vim.git | + |-- [...] | + |-- .zshrc <----------------------+ + |-- .gitignore.d + | `-- zsh + |-- .mrconfig + `-- .mrtrust + +### available.d ### + +The files you see in $XDG\_CONFIG\_HOME/mr/available.d are mr configuration files +that contain the commands to manage (checkout, update etc.) a single +repository. vcsh repo configs end in .vcsh, git configs end in .git, etc. This +is optional and your preference. For example, this is what a zsh.vcsh +with read-only access to my zshrc repo looks likes. I.e. in this specific +example, push can not work as you will be using the author's repository. This +is for demonstration, only. Of course, you are more than welcome to clone from +this repository and fork your own. + + [$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git] + checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh + update = vcsh run zsh git pull + push = vcsh run zsh git push + status = vcsh run zsh git status + gc = vcsh run zsh git gc + +### config.d ### + +$XDG\_CONFIG\_HOME/mr/available.d contains *all available* repositories. Only +files/links present in mr/config.d, however, will be used by mr. That means +that in this example, only the zsh, gitconfigs, tmux and vim repositories will +be checked out. A simple `mr update` run in $HOME will clone or update those +four repositories listed in config.d. + +### ~/.mrconfig ### + +Finally, ~/.mrconfig will tie together all those single files which will allow +you to conveniently run `mr up` etc. to manage all repositories. It looks like +this: + + [DEFAULT] + jobs = 5 + # Use if your mr does not have vcsh support in mainline, yet + include = cat /usr/share/mr/vcsh + include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/* + +### repo.d ### + +$XDG\_CONFIG\_HOME/vcsh/repo.d is the directory where all git repositories which +are under vcsh's control are located. Since their working trees are configured +to be in $HOME, the files contained in those repositories will be put in $HOME +directly. +Of course, [mr] [1] will work with this layout if configured according to this +document (see above). + +vcsh will check if any file it would want to create exists. If it exists, vcsh +will throw a warning and exit. Move away your old config and try again. +Optionally, merge your local and your global configs afterwards and push with +`vcsh run foo git push`. + +## 3.3 Moving into a New Host ## + +To illustrate further, the following steps could move your desired +configuration to a new host. + +1. Clone the mr repository (containing available.d, config.d etc.); for + example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr` +2. Choose your repositories by linking them in config.d (or go with the default + you may have already configured by adding symlinks to git). +3. Make sure the line 'include = cat /usr/share/mr/vcsh' in .mrconfig points + to an existing file +4. Run mr to clone the repositories: `cd; mr update`. +5. Done. Hopefully the above could help explain how this approach saves time by -1. making it easy to manage, clone and update a large number of repositories (thanks to mr) and +1. making it easy to manage, clone and update a large number of repositories + (thanks to mr) and 2. making it unnecessary to create symbolic links in $HOME (thanks to vcsh). ----------- +If you want to give vcsh a try, follow the instructions below. + +# 4 Getting Started # + +Below, you will find a few different methods for setting up vcsh: + +1. The Template Way +2. The Steal-from-Template Way +3. The Manual Way + +### 4.1 The Template Way ### + +#### 4.1.1 Prerequisites #### + +Make sure none of the following files and directories exist for your test +(user). If they do, move them away for now: + +* ~/.gitignore.d +* ~/.mrconfig +* $XDG\_CONFIG\_HOME/mr/available.d/mr.vcsh +* $XDG\_CONFIG\_HOME/mr/available.d/zsh.vcsh +* $XDG\_CONFIG\_HOME/mr/config.d/mr.vcsh +* $XDG\_CONFIG\_HOME/vcsh/repo.d/mr.git/ + +All of the files are part of the template repository, the directory is where +the template will be stored. + + apt-get install mr + +#### 4.1.2 Install vcsh #### + +#### 4.1.2.1 Debian #### + +If you are using Debian Squeeze, you will need to enable backports + + apt-get install vcsh + +#### 4.1.2.2 Arch Linux #### + +vcsh is availabe via [AUR](https://aur.archlinux.org/packages.php?ID=54164) +and further documentation about the use of AUR is available +[on Arch's wiki](https://wiki.archlinux.org/index.php/Arch_User_Repository). + + cd /var/abs/local/ + wget https://aur.archlinux.org/packages/vc/vcsh-git/vcsh-git.tar.gz + tar xfz vcsh-git.tar.gz + cd vcsh-git + makepkg -s + pacman -U vcsh*.pkg.tar.xz + +#### 4.1.2.3 From source #### + +If your version of mr is older than version 1.07, make sure to put + + include = cat /usr/share/mr/vcsh + +into your .mrconfig . + + # choose a location for your checkout + cd $HOME + mkdir -p ~/work/git + git clone git://github.com/RichiH/vcsh.git + cd vcsh + ln -s vcsh /usr/local/bin # or add it to your PATH + cd + +#### 4.1.3 Clone the Template #### + + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + +#### 4.1.4 Enable Your Test Repository #### + + mv ~/.zsh ~/zsh.bak + mv ~/.zshrc ~/zshrc.bak + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/zsh.vcsh . # link, and thereby enable, the zsh repository + cd + mr up + +#### 4.1.5 Set Up Your Own Repositories #### + +Now, it's time to edit the template config and fill it with your own remotes: + + vim $XDG_CONFIG_HOME/mr/available.d/mr.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/zsh.vcsh + +And then create your own stuff: + + vcsh init foo + vcsh run foo git add -f bar baz quux + vcsh run foo git remote add origin git://quuux + vcsh run foo git commit + vcsh run foo git push + + cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo + +Done! + +### 4.2 The Steal-from-Template Way ### + +You're welcome to clone the example repository: + + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + # make sure 'include = cat /usr/share/mr/vcsh' points to an exiting file + vim .mrconfig + +Look around in the clone. It should be reasonably simple to understand. If not, +poke me, RichiH, on Freenode (query) or OFTC (#vcs-home). + + +### 4.3 The Manual Way ### + +This is how my old setup procedure looked like. Adapt it to your own style or +copy mine verbatim, either is fine. + + # Create workspace + mkdir -p ~/work/git + cd !$ + + # Clone vcsh and make it available + git clone git://github.com/RichiH/vcsh.git vcsh + sudo ln -s ~/work/git/vcsh/vcsh /usr/bin/local + hash -r + +Grab my mr config. see below for details on how I set this up + + vcsh clone ssh:///mr.git + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/* . + + +mr is used to actually retrieve configs, etc + + ~ % cat ~/.mrconfig + [DEFAULT] + # adapt /usr/share/mr/vcsh to your system if needed + include = cat /usr/share/mr/vcsh + include = cat $XDG_CONFIG_HOME/mr/config.d/* + ~ % echo $XDG_CONFIG_HOME + /home/richih/.config + ~ % ls $XDG_CONFIG_HOME/mr/available.d # random selection of my repos + git-annex gitk.vcsh git.vcsh ikiwiki mr.vcsh reportbug.vcsh snippets.git wget.vcsh zsh.vcsh + ~ % + # then simply ln -s whatever you want on your local machine from + # $XDG_CONFIG_HOME/mr/available.d to $XDG_CONFIG_HOME/mr/config.d + ~ % cd + ~ % mr -j 5 up + +# 5 Usage # + +### 5.1 Keeping repositories Up-to-Date ### + +This is the beauty of it all. Once you are set up, just run: + + mr up + mr push + +Neat. + +### 5.1 Making Changes ### + +After you have made some changes, for which you would normally use `git add` +and `git commit`, use the vcsh wrapper (like above): + + vcsh run foo git add -f bar baz quux + vcsh run foo git commit + vcsh run foo git push + +By the way, you'll have to use -f/--force flag with git-add because all files +will be ignored by default. This is to show you only useful output when running +git-status. A fix for this problem is being worked on. + +### 5.3 Using vcsh without mr ### + +vcsh encourages you to use [mr] [1]. It helps you manage a large number of +repositories by running the necessary vcsh commands for you. You may choose not +to use mr, in which case you will have to run those commands manually or by +other means. + +#### A Few Examples #### + +To initialize a new repository: `vcsh init zsh` + +To clone a repository: `vcsh clone ssh:///zsh.git` + +To interact with a repository, use the regular Git commands, but prepend them +with `vcsh run $repository_name`. For example: + + vcsh run zsh git status + vcsh run zsh git add -f .zshrc + vcsh run zsh git commit + +Obviously, without mr keeping repositories up-to-date, it will have to be done +manually. Alternatively, you could try something like this: + + for repo in `vcsh list`; do + vcsh run $repo git pull; + done + -[1] http://kitenet.net/~joey/code/mr/ +[mr]: http://kitenet.net/~joey/code/mr/ +[talks]: http://richardhartmann.de/talks/ +[vcsh]: https://github.com/RichiH/vcsh +[vcs-home-list]: http://lists.madduck.net/listinfo/vcs-home