X-Git-Url: https://git.madduck.net/code/vcsh.git/blobdiff_plain/2cba2ad7bd28fd65df380511b29527c9e203d3a0..8f4180366d4a5541f7042d24a1fc424b26e41bb9:/README.md?ds=sidebyside diff --git a/README.md b/README.md index 7a2ba04..57f56ed 100644 --- a/README.md +++ b/README.md @@ -1,59 +1,135 @@ -vcsh - manage and sync config files via git +vcsh - Version Control System for $HOME - multiple Git repositories in $HOME -# Index # -1. Introduction -2. Overview -3. Getting Started -4. Usage +# Index -# 1 Introduction # +1. [30 second howto](#30-second-howto) +2. [Introduction](#introduction) +3. [Usage Exmaples](#usage-examples) +4. [Overview](#overview) +5. [Getting Started](#getting-started) +6. [Contact](#contact) -vcsh allows you to have several git repositories, all maintaining their working -trees in $HOME without clobbering each other. That, in turn, means you can have -one repository per config set (zsh, vim, ssh, etc), picking and choosing which -configs you want to use on which machine. -vcsh was designed with [mr] [1] in mind so you might want to install that, as -well. +# 30 second howto -Read INSTALL.md for detailed setup instructions. +While it may appear that there's an overwhelming amount of documentation and +while the explanation of the concepts behind `vcsh` needs to touch a few gory +details of `git` internals, getting started with `vcsh` is extremely simple. -The following overview will try to give you an idea of the use cases and -advantages of vcsh. See sections 3 and 4 for detailed instructions and -examples. +Let's say you want to version control your `vim` configuration: -# 2 Overview + vcsh init vim + vcsh vim add ~/.vimrc ~/.vim + vcsh vim commit -m 'Initial commit of my Vim configuration' + # optionally push your files to a remote + vcsh vim remote add origin + vcsh vim push -u origin master + # from now on you can push additional commits like this + vcsh vim push -## 2.1 Comparison to Other Solutions ## +If all that looks a _lot_ like standard `git`, that's no coincidence; it's +a design feature. + + +# Introduction + +[vcsh][vcsh] allows you to maintain several Git repositories in one single +directory. They all maintain their working trees without clobbering each other +or interfering otherwise. By default, all Git repositories maintained via +`vcsh` store the actual files in `$HOME` but you can override this setting if +you want to. +All this means that you can have one repository per application or application +family, i.e. `zsh`, `vim`, `ssh`, etc. This, in turn, allows you to clone +custom sets of configurations onto different machines or even for different +users; picking and mixing which configurations you want to use where. +For example, you may not need to have your `mplayer` configuration on a server +or available to root and you may want to maintain different configuration for +`ssh` on your personal and your work machines. + +A lot of modern UNIX-based systems offer packages for `vcsh`. In case yours +does not read `INSTALL.md` for install instructions or `PACKAGING.md` to create +a package, yourself. If you do end up packaging `vcsh` please let us know so we +can give you your own packaging branch in the upstream repository. + +## Talks + +Some people found it useful to look at slides and videos explaining how `vcsh` +works instead of working through the docs. +All slides, videos, and further information can be found +[on the author's talk page][talks]. + + +# Usage Examples + +There are three different ways to interact with `vcsh` repositories; this +section will only show the simplest and easiest way. +Certain more advanced use cases require the other two ways, but don't worry +about this for now. If you never even bother playing with the other two +modes you will still be fine. +`vcsh enter` and `vcsh run` will be covered in later sections. + + +| Task | Command | +| ----------------------------------------------------- | ------------------------------------------------- | +| _Initialize a new repository called "vim"_ | `vcsh init vim` | +| _Clone an existing repository_ | `vcsh clone ` | +| _Add files to repository "vim"_ | `vcsh vim add ~/.vimrc ~/.vim` | +| | `vcsh vim commit -m 'Update Vim configuration'` | +| _Add a remote for repository "vim"_ | `vcsh vim remote add origin ` | +| | `vcsh vim push origin master:master` | +| | `vcsh vim branch --track master origin/master` | +| _Push to remote of repository "vim"_ | `vcsh vim push` | +| _Pull from remote of repository "vim"_ | `vcsh vim pull` | +| _Show status of changed files in all repositories_ | `vcsh status` | +| _Pull from all repositories_ | `vcsh pull` | +| _Push to all repositories_ | `vcsh push` | + + +# Overview + +## From zero to vcsh + +You put a lot of effort into your configuration and want to both protect and +distribute this configuration. Most people who decide to put their dotfiles under version control start with a -**single repository in $HOME**, adding all their dotfiles (and possibly more) +single repository in `$HOME`, adding all their dotfiles (and possibly more) to it. This works, of course, but can become a nuisance as soon as you try to manage more than one host. The next logical step is to create single-purpose repositories in, for example, -~/.dotfiles and to create **symbolic links in $HOME**. This gives you the +`~/.dotfiles` and to create symbolic links into `$HOME`. This gives you the flexibility to check out only certain repositories on different hosts. The downsides of this approach are the necessary manual steps of cloning and -symlinking the individual repositories. It will probably become a nuisance when -you try to manage more than two hosts. +symlinking the individual repositories. + +`vcsh` takes this approach one step further. It enables single-purpose +repositories and stores them in a hidden directory. However, it does not create +symbolic links in `$HOME`; it puts the actual files right into `$HOME`. -**vcsh** takes this second approach one step further. It expects -**single-purpose repositories** and stores them in a hidden directory (similar -to ~/.dotfiles). However, it does not create symbolic links in $HOME; it puts -the **actual files right into $HOME**. +As `vcsh` allows you to put an arbitrary number of distinct repositories into +your `$HOME`, you will end up with a lot of repositories very quickly. -Furthermore, by making use of [mr] [1], it makes it very easy to enable/disable -and clone a large number of repositories. The use of mr is technically optional -(see 4.3), but it will be an integral part of the proposed system that follows. +To manage both `vcsh` and other repositories, we suggest using [mr](mr). `mr` +takes care of pulling in and pushing out new data for a variety of version +control systems. -## 2.2 Default Directory Layout ## +`vcsh` was designed with [mr][mr], a tool to manage Multiple Repositories, in +mind and the two integrate very nicely. `mr` has native support for `vcsh` +repositories and to `vcsh`, `mr` is just another configuration to track. +This make setting up any new machine a breeze. It takes literally less than +five minutes to go from standard installation to fully set up system + +This is where `mr` comes in. While the use of `mr` is technically +optional, but it will be an integral part of the proposed system that follows. + +## Default Directory Layout To illustrate, this is what a possible directory structure looks like. $HOME - |-- .config + |-- $XDG_CONFIG_HOME (defaults to $HOME/.config) | |-- mr | | |-- available.d | | | |-- zsh.vcsh @@ -71,6 +147,7 @@ To illustrate, this is what a possible directory structure looks like. | | |-- tmux.vcsh -> ../available.d/tmux.vcsh | | `-- vim.vcsh -> ../available.d/vim.vcsh | `-- vcsh + | |-- config | `-- repo.d | |-- zsh.git -----------+ | |-- gitconfigs.git | @@ -78,64 +155,67 @@ To illustrate, this is what a possible directory structure looks like. | `-- vim.git | |-- [...] | |-- .zshrc <----------------------+ - |-- .gitignore + |-- .gitignore.d + | `-- zsh |-- .mrconfig `-- .mrtrust -### available.d ### +### available.d -The files you see in ~/.config/mr/available.d are mr configuration files that -contain the commands to manage (checkout, update etc.) a single repository. -vcsh repo configs end in .vcsh, git configs end in .git, etc. This is optional -and your preference. For example, this is what a zsh.mrconfig with read-only -access to my zshrc repo looks likes. I.e. in this specific example, push can -not work. +The files you see in $XDG\_CONFIG\_HOME/mr/available.d are mr configuration files +that contain the commands to manage (checkout, update etc.) a single +repository. vcsh repo configs end in .vcsh, git configs end in .git, etc. This +is optional and your preference. For example, this is what a zsh.vcsh +with read-only access to my zshrc repo looks likes. I.e. in this specific +example, push can not work as you will be using the author's repository. This +is for demonstration, only. Of course, you are more than welcome to clone from +this repository and fork your own. - [$HOME/.config/vcsh/repo.d/zsh.git] + [$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git] checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh - update = vcsh run zsh git pull - push = vcsh run zsh git push - status = vcsh run zsh git status - gc = vcsh run zsh git gc + update = vcsh zsh pull + push = vcsh zsh push + status = vcsh zsh status + gc = vcsh zsh gc -### config.d ### +### config.d -~/.config/mr/available.d contains *all available* repositories. Only +$XDG\_CONFIG\_HOME/mr/available.d contains *all available* repositories. Only files/links present in mr/config.d, however, will be used by mr. That means that in this example, only the zsh, gitconfigs, tmux and vim repositories will be checked out. A simple `mr update` run in $HOME will clone or update those four repositories listed in config.d. -### ~/.mrconfig ### +### ~/.mrconfig Finally, ~/.mrconfig will tie together all those single files which will allow you to conveniently run `mr up` etc. to manage all repositories. It looks like this: [DEFAULT] - jobs = 5 - include = cat ~/.config/mr/config.d/* - -### repo.d ### + include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/* -~/.config/vcsh/repo.d is the directory into which vcsh clones the git -repositories. Since their working trees are configured to be in $HOME, the -files contained in those repositories will be put in $HOME directly (see .zshrc -above). +### repo.d +$XDG\_CONFIG\_HOME/vcsh/repo.d is the directory where all git repositories which +are under vcsh's control are located. Since their working trees are configured +to be in $HOME, the files contained in those repositories will be put in $HOME +directly. +Of course, [mr] [mr] will work with this layout if configured according to this +document (see above). vcsh will check if any file it would want to create exists. If it exists, vcsh will throw a warning and exit. Move away your old config and try again. Optionally, merge your local and your global configs afterwards and push with -`vcsh run foo git push`. +`vcsh foo push`. -## 2.3 Moving into a New Host ## +## Moving into a New Host To illustrate further, the following steps could move your desired configuration to a new host. 1. Clone the mr repository (containing available.d, config.d etc.); for - example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git` + example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr` 2. Choose your repositories by linking them in config.d (or go with the default you may have already configured by adding symlinks to git). 3. Run mr to clone the repositories: `cd; mr update`. @@ -149,7 +229,8 @@ Hopefully the above could help explain how this approach saves time by If you want to give vcsh a try, follow the instructions below. -# 3 Getting Started # + +# Getting Started Below, you will find a few different methods for setting up vcsh: @@ -157,75 +238,109 @@ Below, you will find a few different methods for setting up vcsh: 2. The Steal-from-Template Way 3. The Manual Way -### 3.1 The Template Way ### +### The Template Way -#### 3.1.1 Prerequisites #### +#### Prerequisites Make sure none of the following files and directories exist for your test (user). If they do, move them away for now: -* ~/.gitignore +* ~/.gitignore.d * ~/.mrconfig -* ~/.config/mr/available.d/mr.vcsh -* ~/.config/mr/available.d/zsh.vcsh -* ~/.config/mr/config.d/mr.vcsh -* ~/.config/vcsh/repo.d/mr.git/ +* $XDG\_CONFIG\_HOME/mr/available.d/mr.vcsh +* $XDG\_CONFIG\_HOME/mr/available.d/zsh.vcsh +* $XDG\_CONFIG\_HOME/mr/config.d/mr.vcsh +* $XDG\_CONFIG\_HOME/vcsh/repo.d/mr.git/ All of the files are part of the template repository, the directory is where the template will be stored. apt-get install mr -#### 3.1.2 Clone the Template #### +### Install vcsh + +#### Debian +If you are using Debian Squeeze, you will need to enable backports. +From Wheezy onwards, you can install it directly: + + apt-get install vcsh + +#### Gentoo + +To install vcsh in Gentoo Linux just give the following command as root: + + emerge dev-vcs/vcsh + +#### Arch Linux + +vcsh is availabe via [AUR](https://aur.archlinux.org/packages.php?ID=54164) +and further documentation about the use of AUR is available +[on Arch's wiki](https://wiki.archlinux.org/index.php/Arch_User_Repository). + + cd /var/abs/local/ + wget https://aur.archlinux.org/packages/vc/vcsh-git/vcsh-git.tar.gz + tar xfz vcsh-git.tar.gz + cd vcsh-git + makepkg -s + pacman -U vcsh*.pkg.tar.xz + +#### From source + + # choose a location for your checkout mkdir -p ~/work/git - cd !$ - git clone git://github.com/RichiH/vcsh.git vcsh + cd ~/work/git + git clone git://github.com/RichiH/vcsh.git cd vcsh - ln -s vcsh /usr/local/bin # or add it to your PATH + sudo ln -s vcsh /usr/local/bin # or add it to your PATH cd - vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr.vcsh -#### 3.1.3 Enable Your Test Repository #### +#### Clone the Template + + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + +#### Enable Your Test Repository mv ~/.zsh ~/zsh.bak mv ~/.zshrc ~/zshrc.bak - cd ~/.config/mr/config.d/ + cd $XDG_CONFIG_HOME/mr/config.d/ ln -s ../available.d/zsh.vcsh . # link, and thereby enable, the zsh repository cd mr up -#### 3.1.4 Set Up Your Own Repositories #### +#### Set Up Your Own Repositories Now, it's time to edit the template config and fill it with your own remotes: - vim .config/mr/available.d/mr.vcsh - vim .config/mr/available.d/zsh.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/mr.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/zsh.vcsh And then create your own stuff: vcsh init foo - vcsh run foo git add -f bar baz quux - vcsh run foo git remote add origin git://quuux - vcsh run foo git commit - vcsh run foo git push + vcsh foo add bar baz quux + vcsh foo remote add origin git://quuux + vcsh foo commit + vcsh foo push - cp .config/mr/available.d/mr.vcsh .config/mr/available.d/foo.vcsh - vim .config/mr/available.d/foo.vcsh # add your own repo + cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo Done! -### 3.2 The Steal-from-Template Way ### +### The Steal-from-Template Way You're welcome to clone the example repository: - git clone git://github.com/RichiH/vcsh_mr_template.git + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + # make sure 'include = cat /usr/share/mr/vcsh' points to an exiting file + vim .mrconfig Look around in the clone. It should be reasonably simple to understand. If not, poke me, RichiH, on Freenode (query) or OFTC (#vcs-home). -### 3.3 The Manual Way ### +### The Manual Way This is how my old setup procedure looked like. Adapt it to your own style or copy mine verbatim, either is fine. @@ -242,7 +357,7 @@ copy mine verbatim, either is fine. Grab my mr config. see below for details on how I set this up vcsh clone ssh:///mr.git - cd ~/.config/mr/config.d/ + cd $XDG_CONFIG_HOME/mr/config.d/ ln -s ../available.d/* . @@ -250,7 +365,9 @@ mr is used to actually retrieve configs, etc ~ % cat ~/.mrconfig [DEFAULT] - include = cat ~/.config/mr/config.d/* + # adapt /usr/share/mr/vcsh to your system if needed + include = cat /usr/share/mr/vcsh + include = cat $XDG_CONFIG_HOME/mr/config.d/* ~ % echo $XDG_CONFIG_HOME /home/richih/.config ~ % ls $XDG_CONFIG_HOME/mr/available.d # random selection of my repos @@ -261,9 +378,10 @@ mr is used to actually retrieve configs, etc ~ % cd ~ % mr -j 5 up -# 4 Usage # -### 4.1 Keeping repositories Up-to-Date ### +# mr usage ; will be factored out & rewritten + +### Keeping repositories Up-to-Date This is the beauty of it all. Once you are set up, just run: @@ -272,27 +390,22 @@ This is the beauty of it all. Once you are set up, just run: Neat. -### 4.1 Making Changes ### +### Making Changes After you have made some changes, for which you would normally use `git add` and `git commit`, use the vcsh wrapper (like above): - vcsh run foo git add -f bar baz quux - vcsh run foo git commit - vcsh run foo git push - -By the way, you'll have to use -f/--force flag with git-add because all files -will be ignored by default. This is to show you only useful output when running -git-status. A fix for this problem is being worked on. + vcsh foo add bar baz quux + vcsh foo commit + vcsh foo push -### 4.3 Using vcsh without mr ### +### Using vcsh without mr -vcsh encourages you to use [mr] [1]. It helps you manage a large number of +vcsh encourages you to use [mr][mr]. It helps you manage a large number of repositories by running the necessary vcsh commands for you. You may choose not to use mr, in which case you will have to run those commands manually or by other means. -#### A Few Examples #### To initialize a new repository: `vcsh init zsh` @@ -301,9 +414,9 @@ To clone a repository: `vcsh clone ssh:///zsh.git` To interact with a repository, use the regular Git commands, but prepend them with `vcsh run $repository_name`. For example: - vcsh run zsh git status - vcsh run zsh git add -f .zshrc - vcsh run zsh git commit + vcsh zsh status + vcsh zsh add .zshrc + vcsh zsh commit Obviously, without mr keeping repositories up-to-date, it will have to be done manually. Alternatively, you could try something like this: @@ -312,8 +425,20 @@ manually. Alternatively, you could try something like this: vcsh run $repo git pull; done ----------- -mr can be found at: [http://kitenet.net/~joey/code/mr/][1] +# Contact + +There are several ways to get in touch with the author and a small but committed +community around the general idea of version controlling your (digital) life. + +* IRC: #vcs-home on irc.oftc.net + +* Mailing list: [http://lists.madduck.net/listinfo/vcs-home][vcs-home-list] + +* Pull requests or issues on [https://github.com/RichiH/vcsh][vcsh] + -[1]: http://kitenet.net/~joey/code/mr/ (http://kitenet.net/~joey/code/mr/) +[mr]: http://kitenet.net/~joey/code/mr/ +[talks]: http://richardhartmann.de/talks/ +[vcsh]: https://github.com/RichiH/vcsh +[vcs-home-list]: http://lists.madduck.net/listinfo/vcs-home