X-Git-Url: https://git.madduck.net/code/vcsh.git/blobdiff_plain/4df45a4f9afa9c46f5fc23be1884b78b0fb93375..980cf95c728f02610649fc4dee37a24f00d8dfd3:/README.md diff --git a/README.md b/README.md index 37ede68..fce637b 100644 --- a/README.md +++ b/README.md @@ -1,39 +1,59 @@ vcsh - manage and sync config files via git -# Introduction # +# Index # -vcsh allows you to have several git repositories, all maintaining their working trees in $HOME without clobbering each other. -That, in turn, means you can have one repository per config set (zsh, vim, ssh, etc), picking and choosing which configs you want to use on which machine. +1. Introduction +2. Overview +3. Getting Started +4. Usage -vcsh was designed with mr [1] in mind so you might want to install that, as well. +# 1 Introduction # + +vcsh allows you to have several git repositories, all maintaining their working +trees in $HOME without clobbering each other. That, in turn, means you can have +one repository per config set (zsh, vim, ssh, etc), picking and choosing which +configs you want to use on which machine. + +vcsh was designed with [mr] [1] in mind so you might want to install that, as +well. Read INSTALL.md for detailed setup instructions. -Questions? RichiH@{Freenode,OFTC,IRCnet} +The following overview will try to give you an idea of the use cases and +advantages of vcsh. See sections 3 and 4 for detailed instructions and +examples. + +# 2 Overview -## Comparison to Other Solutions ## +## 2.1 Comparison to Other Solutions ## -Most people who decide to put their dotfiles under version control start with a **single repository in $HOME**, adding all their dotfiles (and possibly more) to it. -This works, of course, but can become a nuisance as soon as you try to manage more than one host. +Most people who decide to put their dotfiles under version control start with a +**single repository in $HOME**, adding all their dotfiles (and possibly more) +to it. This works, of course, but can become a nuisance as soon as you try to +manage more than one host. -The next logical step is to create single-purpose repositories in, for example, ~/.dotfiles and to create **symbolic links in $HOME**. -This gives you the flexibility to check out only certain repositories on different hosts. -The downsides of this approach are the necessary manual steps of cloning and symlinking the individual repositories. -It will probably become a nuisance when you try to manage more than two hosts. +The next logical step is to create single-purpose repositories in, for example, +~/.dotfiles and to create **symbolic links in $HOME**. This gives you the +flexibility to check out only certain repositories on different hosts. The +downsides of this approach are the necessary manual steps of cloning and +symlinking the individual repositories. It will probably become a nuisance when +you try to manage more than two hosts. -vcsh takes this second approach one step further. -It expects single-purpose repositories and stores them in a hidden directory (similar to ~/.dotfiles). -However, it does not create symbolic links in $HOME; it puts the actual files right into $HOME. +**vcsh** takes this second approach one step further. It expects +**single-purpose repositories** and stores them in a hidden directory (similar +to ~/.dotfiles). However, it does not create symbolic links in $HOME; it puts +the **actual files right into $HOME**. -Furthermore, by making use of mr [1], it makes it very easy to enable/disable and clone a large number of repositories. -The use of mr is technically optional, but it will be an integral part of the proposed system that follows. +Furthermore, by making use of [mr] [1], it makes it very easy to enable/disable +and clone a large number of repositories. The use of mr is technically optional +(see 4.3), but it will be an integral part of the proposed system that follows. -## Default Directory Layout ## +## 2.2 Default Directory Layout ## To illustrate, this is what a possible directory structure looks like. $HOME - |-- .config + |-- $XDG_CONFIG_HOME (defaults to $HOME/.config) | |-- mr | | |-- available.d | | | |-- zsh.vcsh @@ -46,10 +66,10 @@ To illustrate, this is what a possible directory structure looks like. | | | |-- vimperator.vcsh | | | `-- snippets.git | | `-- config.d - | | |-- zsh.mrconfig -> ../available.d/zsh.mrconfig - | | |-- gitconfigs.mrconfig -> ../available.d/gitconfigs.mrconfig - | | |-- tmux.mrconfig -> ../available.d/tmux.mrconfig - | | `-- vim.mrconfig -> ../available.d/vim.mrconfig + | | |-- zsh.vcsh -> ../available.d/zsh.vcsh + | | |-- gitconfigs.vcsh -> ../available.d/gitconfigs.vcsh + | | |-- tmux.vcsh -> ../available.d/tmux.vcsh + | | `-- vim.vcsh -> ../available.d/vim.vcsh | `-- vcsh | `-- repo.d | |-- zsh.git -----------+ @@ -62,46 +82,241 @@ To illustrate, this is what a possible directory structure looks like. |-- .mrconfig `-- .mrtrust -In this setup, ~/.mrconfig looks like: +### available.d ### - [DEFAULT] - jobs = 5 - include = cat ~/.config/mr/config.d/* +The files you see in $XDG_CONFIG_HOME/mr/available.d are mr configuration files +that contain the commands to manage (checkout, update etc.) a single +repository. vcsh repo configs end in .vcsh, git configs end in .git, etc. This +is optional and your preference. For example, this is what a zsh.vcsh +with read-only access to my zshrc repo looks likes. I.e. in this specific +example, push can not work as you will be using the author's repository. This +is for demonstration, only. Of course, you are more than welcome to clone from +this repository and fork your own. -The files you see in ~/.config/mr/available.d are mr configuration files that contain the commands to manage (checkout, update etc.) a single repository. -vcsh repo configs end in .vcsh, git configs end in .git, etc. This is optional and your preference. -For example, this is what a zsh.mrconfig with read-only access to my zshrc repo looks likes. I.e. in this specific example, push can not work. + [$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git] + checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh + update = vcsh run zsh git pull + push = vcsh run zsh git push + status = vcsh run zsh git status + gc = vcsh run zsh git gc - [$HOME/.config/vcsh/repo.d/zsh.git] - checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' - update = vcsh run bash git pull - push = vcsh run bash git push - status = vcsh run bash git status +### config.d ### -~/.config/mr/available.d contains *all available* repositories. -Only files/links present in mr/config.d, however, will be used by mr. -That means that in this example, only the zsh, gitconfigs, tmux and vim repositories will be checked out. -A simple `mr update` run in $HOME will clone or update those four repositories listed in config.d. +$XDG_CONFIG_HOME/mr/available.d contains *all available* repositories. Only +files/links present in mr/config.d, however, will be used by mr. That means +that in this example, only the zsh, gitconfigs, tmux and vim repositories will +be checked out. A simple `mr update` run in $HOME will clone or update those +four repositories listed in config.d. -~/.config/vcsh/repo.d is the directory where vcsh clones the git repositories into. -Since their working trees are configured to be in $HOME, the files contained in those repositories will be put in $HOME directly (see .bashrc above). +### ~/.mrconfig ### + +Finally, ~/.mrconfig will tie together all those single files which will allow +you to conveniently run `mr up` etc. to manage all repositories. It looks like +this: + + [DEFAULT] + jobs = 5 + include = cat $XDG_CONFIG_HOME/mr/config.d/* -vcsh will check if any file it would want to create exists. If it exists, vcsh will throw a warning and exit. Move away your old config and try again. Optionally, merge your local and your global configs afterwards and push with `vcsh run foo git push`. +### repo.d ### -## Moving into a New Host ## +$XDG_CONFIG_HOME/vcsh/repo.d is the directory where all git repositories which +are under vcsh's control are located. Since their working trees are configured +to be in $HOME, the files contained in those repositories will be put in $HOME +directly. +Of course, [mr] [1] will work with this layout if configured according to this +document (see above). -To illustrate further, the following steps could move your desired configuration to a new host. +vcsh will check if any file it would want to create exists. If it exists, vcsh +will throw a warning and exit. Move away your old config and try again. +Optionally, merge your local and your global configs afterwards and push with +`vcsh run foo git push`. -1. Clone the mr repository (containing available.d, config.d etc.), for example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git` -2. Choose your repositories by linking them in config.d (or go with the default you may have already configured by adding symlinks to git). +## 2.3 Moving into a New Host ## + +To illustrate further, the following steps could move your desired +configuration to a new host. + +1. Clone the mr repository (containing available.d, config.d etc.); for + example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git` +2. Choose your repositories by linking them in config.d (or go with the default + you may have already configured by adding symlinks to git). 3. Run mr to clone the repositories: `cd; mr update`. 4. Done. Hopefully the above could help explain how this approach saves time by -1. making it easy to manage, clone and update a large number of repositories (thanks to mr) and +1. making it easy to manage, clone and update a large number of repositories + (thanks to mr) and 2. making it unnecessary to create symbolic links in $HOME (thanks to vcsh). +If you want to give vcsh a try, follow the instructions below. + +# 3 Getting Started # + +Below, you will find a few different methods for setting up vcsh: + +1. The Template Way +2. The Steal-from-Template Way +3. The Manual Way + +### 3.1 The Template Way ### + +#### 3.1.1 Prerequisites #### + +Make sure none of the following files and directories exist for your test +(user). If they do, move them away for now: + +* ~/.gitignore +* ~/.mrconfig +* $XDG_CONFIG_HOME/mr/available.d/mr.vcsh +* $XDG_CONFIG_HOME/mr/available.d/zsh.vcsh +* $XDG_CONFIG_HOME/mr/config.d/mr.vcsh +* $XDG_CONFIG_HOME/vcsh/repo.d/mr.git/ + +All of the files are part of the template repository, the directory is where +the template will be stored. + + apt-get install mr + +#### 3.1.2 Clone the Template #### + + mkdir -p ~/work/git + cd !$ + git clone git://github.com/RichiH/vcsh.git vcsh + cd vcsh + ln -s vcsh /usr/local/bin # or add it to your PATH + cd + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr.vcsh + +#### 3.1.3 Enable Your Test Repository #### + + mv ~/.zsh ~/zsh.bak + mv ~/.zshrc ~/zshrc.bak + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/zsh.vcsh . # link, and thereby enable, the zsh repository + cd + mr up + +#### 3.1.4 Set Up Your Own Repositories #### + +Now, it's time to edit the template config and fill it with your own remotes: + + vim $XDG_CONFIG_HOME/mr/available.d/mr.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/zsh.vcsh + +And then create your own stuff: + + vcsh init foo + vcsh run foo git add -f bar baz quux + vcsh run foo git remote add origin git://quuux + vcsh run foo git commit + vcsh run foo git push + + cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo + +Done! + +### 3.2 The Steal-from-Template Way ### + +You're welcome to clone the example repository: + + git clone git://github.com/RichiH/vcsh_mr_template.git + +Look around in the clone. It should be reasonably simple to understand. If not, +poke me, RichiH, on Freenode (query) or OFTC (#vcs-home). + + +### 3.3 The Manual Way ### + +This is how my old setup procedure looked like. Adapt it to your own style or +copy mine verbatim, either is fine. + + # Create workspace + mkdir -p ~/work/git + cd !$ + + # Clone vcsh and make it available + git clone git://github.com/RichiH/vcsh.git vcsh + sudo ln -s ~/work/git/vcsh/vcsh /usr/bin/local + hash -r + +Grab my mr config. see below for details on how I set this up + + vcsh clone ssh:///mr.git + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/* . + + +mr is used to actually retrieve configs, etc + + ~ % cat ~/.mrconfig + [DEFAULT] + include = cat $XDG_CONFIG_HOME/mr/config.d/* + ~ % echo $XDG_CONFIG_HOME + /home/richih/.config + ~ % ls $XDG_CONFIG_HOME/mr/available.d # random selection of my repos + git-annex gitk.vcsh git.vcsh ikiwiki mr.vcsh reportbug.vcsh snippets.git wget.vcsh zsh.vcsh + ~ % + # then simply ln -s whatever you want on your local machine from + # $XDG_CONFIG_HOME/mr/available.d to $XDG_CONFIG_HOME/mr/config.d + ~ % cd + ~ % mr -j 5 up + +# 4 Usage # + +### 4.1 Keeping repositories Up-to-Date ### + +This is the beauty of it all. Once you are set up, just run: + + mr up + mr push + +Neat. + +### 4.1 Making Changes ### + +After you have made some changes, for which you would normally use `git add` +and `git commit`, use the vcsh wrapper (like above): + + vcsh run foo git add -f bar baz quux + vcsh run foo git commit + vcsh run foo git push + +By the way, you'll have to use -f/--force flag with git-add because all files +will be ignored by default. This is to show you only useful output when running +git-status. A fix for this problem is being worked on. + +### 4.3 Using vcsh without mr ### + +vcsh encourages you to use [mr] [1]. It helps you manage a large number of +repositories by running the necessary vcsh commands for you. You may choose not +to use mr, in which case you will have to run those commands manually or by +other means. + +#### A Few Examples #### + +To initialize a new repository: `vcsh init zsh` + +To clone a repository: `vcsh clone ssh:///zsh.git` + +To interact with a repository, use the regular Git commands, but prepend them +with `vcsh run $repository_name`. For example: + + vcsh run zsh git status + vcsh run zsh git add -f .zshrc + vcsh run zsh git commit + +Obviously, without mr keeping repositories up-to-date, it will have to be done +manually. Alternatively, you could try something like this: + + for repo in `vcsh list`; do + vcsh run $repo git pull; + done + ---------- -[1] http://kitenet.net/~joey/code/mr/ +mr can be found at: [http://kitenet.net/~joey/code/mr/][1] + +[1]: http://kitenet.net/~joey/code/mr/ (http://kitenet.net/~joey/code/mr/)