X-Git-Url: https://git.madduck.net/code/vcsh.git/blobdiff_plain/50458be88285376612b5fc1ff45b1f96ee9a0930..d946b07817ffe6e:/vcsh

diff --git a/vcsh b/vcsh
index 8fedc09..0b4c452 100755
--- a/vcsh
+++ b/vcsh
@@ -1,134 +1,518 @@
 #!/bin/sh
 
-#set -x
+# This program is licensed under the GNU GPL version 2 or later.
+# (c) Richard "RichiH" Hartmann <richih@debian.org>, 2011-2014
+# For details, see LICENSE. To submit patches, you have to agree to
+# license your code under the GNU GPL version 2 or later.
 
+# While the following is not legally binding, the author would like to
+# explain the choice of GPLv2+ over GPLv3+.
+# The author prefers GPLv3+ over GPLv2+ but feels it's better to maintain
+# full compatibility's with Git. In case Git ever changes its licensing terms,
+# which is admittedly extremely unlikely to the point of being impossible,
+# this software will most likely follow suit.
+
+# This should always be the first line of code to facilitate debugging
+[ -n "$VCSH_DEBUG" ] && set -vx
+
+
+# If '.git-HEAD' is appended to the version, you are seeing an unreleased
+# version of vcsh; the master branch is supposed to be clean at all times
+# so you can most likely just use it nonetheless
+VERSION='1.20141009'
 SELF=$(basename $0)
-[ -z $XDG_CONFIG_HOME ] && XDG_CONFIG_HOME="$HOME/.config"
-VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
+
+fatal() {
+	echo "$SELF: fatal: $1" >&2
+	exit $2
+}
+
+# We need to run getops as soon as possible so we catch -d and other
+# options that will modify our behaviour.
+# Commands are handled at the end of this script.
+while getopts "c:dv" flag; do
+	if [ x"$1" = x'-d' ] || [ x"$1" = x'--debug' ]; then
+		set -vx
+		VCSH_DEBUG=1
+		echo "debug mode on"
+		echo "$SELF $VERSION"
+	elif [ x"$1" = x'-v' ]; then
+		VCSH_VERBOSE=1
+		echo "verbose mode on"
+		echo "$SELF $VERSION"
+	elif [ x"$1" = x'-c' ]; then
+		VCSH_OPTION_CONFIG=$OPTARG
+	fi
+	shift 1
+done
+
+source_all() {
+	# Source file even if it's in $PWD and does not have any slashes in it
+	case $1 in
+		*/*) . "$1";;
+		*)   . "$PWD/$1";;
+	esac;
+}
+
+
+# Read configuration and set defaults if anything's not set
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+: ${XDG_CONFIG_HOME:="$HOME/.config"}
+
+# Read configuration files if there are any
+[ -r "/etc/vcsh/config" ]             && . "/etc/vcsh/config"
+[ -r "$XDG_CONFIG_HOME/vcsh/config" ] && . "$XDG_CONFIG_HOME/vcsh/config"
+if [ -n "$VCSH_OPTION_CONFIG" ]; then
+	# Source $VCSH_OPTION_CONFIG if it can be read and is in $PWD of $PATH
+	if [ -r "$VCSH_OPTION_CONFIG" ]; then
+		source_all "$VCSH_OPTION_CONFIG"
+	else
+		fatal "Can not read configuration file '$VCSH_OPTION_CONFIG'" 1
+	fi
+fi
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+
+# Read defaults
+: ${VCSH_REPO_D:="$XDG_CONFIG_HOME/vcsh/repo.d"}
+: ${VCSH_HOOK_D:="$XDG_CONFIG_HOME/vcsh/hooks-enabled"}
+: ${VCSH_BASE:="$HOME"}
+: ${VCSH_GITIGNORE:=exact}
+: ${VCSH_GITATTRIBUTES:=none}
+: ${VCSH_WORKTREE:=absolute}
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+	fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ] && [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+	fatal "'\$VCSH_WORKTREE' must equal 'absolute', or 'relative'" 1
+fi
+
 
 help() {
-	echo "usage: $SELF <args>
+	echo "usage: $SELF <options> <command>
+
+   options:
+   -c <file>            Source file
+   -d                   Enable debug mode
+   -v                   Enable verbose mode
 
-   help           Display this help
+   commands:
+   clone <remote> \\
+         [<repo>]       Clone from an existing repository
+   commit               Commit in all repositories
+   delete <repo>        Delete an existing repository
+   enter <repo>         Enter repository; spawn new instance of \$SHELL
+   help                 Display this help text
+   init <repo>          Initialize a new repository
+   list                 List all repositories
+   list-tracked         List all files tracked by vcsh
+   list-tracked-by \\
+        <repo>          List files tracked by a repository
+   pull                 Pull from all vcsh remotes
+   push                 Push to vcsh remotes
+   rename <repo> \\
+          <newname>     Rename repository
+   run <repo> \\
+       <command>        Use this repository
+   status [<repo>]      Show statuses of all/one vcsh repositories
+   upgrade <repo>       Upgrade repository to currently recommended settings
+   version              Print version information
+   which <substring>    Find substring in name of any tracked file
+   write-gitignore \\
+   <repo>               Write .gitignore.d/<repo> via git ls-files
 
-   list           List all repos
+   <repo> <git command> Shortcut to run git commands directly
+   <repo>               Shortcut to enter repository" >&2
+}
 
-   use <repo>     Use this repository
-   run <repo>
-       <command>  Use this repository
+debug() {
+	[ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $@"
+}
 
-   init           Initialize a new repository
-   clone <remote>
-         [<repo>] Clone from an existing repository
+verbose() {
+	if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $@"; fi
+}
 
-   exit           Exit vcsh mode" >&2
+error() {
+	echo "$SELF: error: $1" >&2
 }
 
-use() {
-	REPO_NAME="$1"
-	GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
+info() {
+	echo "$SELF: info: $1"
+}
 
-	if [ ! -d "$GIT_DIR" ]; then
-		echo E: no repository found for "$REPO_NAME" >&2
-		return 2
+clone() {
+	hook pre-clone
+	init
+	git remote add origin "$GIT_REMOTE"
+	git config branch.master.remote origin
+	git config branch.master.merge  refs/heads/master
+	if [ $(git ls-remote origin master 2> /dev/null | wc -l ) -lt 1 ]; then
+		info "remote is empty, not merging anything"
+		exit
 	fi
+	git fetch
+	hook pre-merge
+	git ls-tree -r --name-only origin/master | (while read object; do
+		[ -e "$object" ] &&
+			error "'$object' exists." &&
+			VCSH_CONFLICT=1
+	done
+	[ x"$VCSH_CONFLICT" = x'1' ]) &&
+		fatal "will stop after fetching and not try to merge!
+  Once this situation has been resolved, run 'vcsh $VCSH_REPO_NAME pull' to finish cloning." 17
+	git merge origin/master
+	hook post-merge
+	hook post-clone
+	retire
+	hook post-clone-retired
+}
 
-	export GIT_DIR
-	export GIT_WORK_TREE="$(git config --get core.worktree)"
-	export VCSH_DIRECTORY="$REPO_NAME"
+commit() {
+	hook pre-commit
+	for VCSH_REPO_NAME in $(list); do
+		echo "$VCSH_REPO_NAME: "
+		GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+		use
+		git commit --untracked-files=no --quiet
+		VCSH_COMMAND_RETURN_CODE=$?
+		echo
+	done
+	hook post-commit
+}
+
+delete() {
+	cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+	use
+	info "This operation WILL DESTROY DATA!"
+	files=$(git ls-files)
+	echo "These files will be deleted:
+
+$files
+
+AGAIN, THIS WILL DELETE YOUR DATA!
+To continue, type 'Yes, do as I say'"
+	read answer
+	[ "x$answer" = 'xYes, do as I say' ] || exit 16
+	for file in $files; do
+		rm -f $file || info "could not delete '$file', continuing with deletion"
+	done
+	rm -rf "$GIT_DIR" || error "could not delete '$GIT_DIR'"
+}
+
+enter() {
+	hook pre-enter
+	use
+	$SHELL
+	hook post-enter
+}
+
+git_dir_exists() {
+	[ -d "$GIT_DIR" ] || fatal "no repository found for '$VCSH_REPO_NAME'" 12
+}
+
+hook() {
+	for hook in "$VCSH_HOOK_D/$1"* "$VCSH_HOOK_D/$VCSH_REPO_NAME.$1"*; do
+		[ -x "$hook" ] || continue
+		verbose "executing '$hook'"
+		"$hook"
+	done
 }
 
 init() {
-	[[ -e $GIT_DIR ]] &&
-		echo "$(basename $0): fatal: $GIT_DIR exists" &&
-		return 21
-	export GIT_WORK_TREE="$HOME"
-	mkdir -p $GIT_WORK_TREE
-	cd $GIT_WORK_TREE ||
-		(echo "$(basename $0): fatal: could not enter $GIT_WORK_TREE" &&
-		 exit 20) || exit 20
-	cd $GIT_WORK_TREE
-	git init
-	git config core.worktree $GIT_WORK_TREE
-}
-
-leave() {
-	unset GIT_DIR
-	unset GIT_WORK_TREE
-	unset VCSH_DIRECTORY
+	hook pre-init
+	[ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
+	mkdir -p "$VCSH_BASE" || fatal "could not create '$VCSH_BASE'" 50
+	cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+	git init --shared=0600
+	upgrade
+	hook post-init
 }
 
-if [ "$1" = 'help' ] || [ $# -eq 0 ]; then
-	help
-	[ "$1" = 'help' ]
-	return $?
+list() {
+	for repo in "$VCSH_REPO_D"/*.git; do
+		[ -d "$repo" ] && [ -r "$repo" ] && echo "$(basename "$repo" .git)"
+	done
+}
 
-elif [ "$1" = 'list' ]; then
-	for i in $VCSH_BASE/*.git; do
-		echo $(basename $i .git)
+get_files() {
+	GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+	git ls-files
+}
+
+list_tracked() {
+	for VCSH_REPO_NAME in $(list); do
+		get_files
+	done | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
+	    sed 's/[,\&]/\\&/g')," | sort -u
+}
+
+list_tracked_by() {
+	use
+	git ls-files | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
+	    sed 's/[,\&]/\\&/g')," | sort -u
+}
+
+pull() {
+	hook pre-pull
+	for VCSH_REPO_NAME in $(list); do
+		printf '%s: ' "$VCSH_REPO_NAME"
+		GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+		use
+		git pull
+		VCSH_COMMAND_RETURN_CODE=$?
+		echo
 	done
-	return 0
+	hook post-pull
+}
+
+push() {
+	hook pre-push
+	for VCSH_REPO_NAME in $(list); do
+		printf '%s: ' "$VCSH_REPO_NAME"
+		GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+		use
+		git push
+		VCSH_COMMAND_RETURN_CODE=$?
+		echo
+	done
+	hook post-push
+}
+
+retire() {
+	unset VCSH_DIRECTORY
+}
+
+rename() {
+	git_dir_exists
+	[ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
+	mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
 
-elif [ "$1" = 'run' ]; then
-	use $2
-	shift 2
+	# Now that the repository has been renamed, we need to fix up its configuration
+	# Overwrite old name..
+	GIT_DIR=$GIT_DIR_NEW
+	VCSH_REPO_NAME=$VCSH_REPO_NAME_NEW
+	# ..and clobber all old configuration
+	upgrade
+}
+
+run() {
+	hook pre-run
+	use
 	"$@"
-	leave
-	return 0
-
-elif [ "$1" = 'use' ]; then
-	if [[ -o NO_IGNORE_EOF ]]; then
-		export VCSH_NO_IGNORE_EOF=1
-		setopt IGNORE_EOF
-		vcsh_exit() {vcsh exit; zle reset-prompt}
-		zle -N vcsh_exit
-		bindkey '^d' 'vcsh_exit'
+	VCSH_COMMAND_RETURN_CODE=$?
+	hook post-run
+}
+
+status() {
+	if [ -n "$VCSH_REPO_NAME" ]; then
+		GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+		use
+		git status --short --untracked-files='no'
+		VCSH_COMMAND_RETURN_CODE=$?
+	else
+		for VCSH_REPO_NAME in $(list); do
+			echo "$VCSH_REPO_NAME:"
+			GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+			use
+			git status --short --untracked-files='no'
+			VCSH_COMMAND_RETURN_CODE=$?
+			echo
+		done
 	fi
-	use $2
-	buildPS1
-	return 0
+}
 
-elif [ "$1" = 'clone' ]; then
-	GIT_REMOTE="$2"
-	REPO_NAME="$3"
-	[[ -z $REPO_NAME ]] && REPO_NAME=$(basename $GIT_REMOTE .git)
-	export REPO_NAME
-	export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-	init
+upgrade() {
+	hook pre-upgrade
+	# fake-bare repositories are not bare, actually. Set this to false
+	# because otherwise Git complains "fatal: core.bare and core.worktree
+	# do not make sense"
+	git config core.bare false
+	# core.worktree may be absolute or relative to $GIT_DIR, depending on
+	# user preference
+	if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ]; then
+		git config core.worktree "$(cd "$GIT_DIR" && GIT_WORK_TREE=$VCSH_BASE git rev-parse --show-cdup)"
+	elif [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+		git config core.worktree "$VCSH_BASE"
+	fi
+	[ ! "x$VCSH_GITIGNORE" = 'xnone' ] && git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
+	[ ! "x$VCSH_GITATTRIBUTES" = 'xnone' ] && git config core.attributesfile ".gitattributes.d/$VCSH_REPO_NAME"
+	git config vcsh.vcsh 'true'
+	use
+	[ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME"
+	[ -e "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME"
+	hook post-upgrade
+}
 
-	git remote add origin $GIT_REMOTE
-	git config branch.master.remote origin
-	git config branch.master.merge  refs/heads/master
-	git fetch
-	for i in $(git ls-tree -r origin/master | awk '{print $4}'); do
-	[[ -e $i ]] &&
-		echo "$(basename $0): error: $i exists." &&
-		CONFLICT=1;
-	done
-	[[ -n $CONFLICT ]] &&
-		echo "$(basename $0): fatal: will stop after fetching and not try to merge!\n" &&
-		exit 3
-	git merge origin/master
-	vcsh use $REPO_NAME
+use() {
+	git_dir_exists
+	VCSH_DIRECTORY=$VCSH_REPO_NAME; export VCSH_DIRECTORY
+}
 
-elif [ "$1" = 'init' ]; then
-	export REPO_NAME="$2"
-	export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-	init
-	vcsh use $REPO_NAME
+which() {
+	[ -e "$VCSH_COMMAND_PARAMETER" ] || fatal "'$VCSH_COMMAND_PARAMETER' does not exist" 1
+	for VCSH_REPO_NAME in $(list); do
+		for VCSH_FILE in $(get_files); do
+			echo "$VCSH_FILE" | grep -q "$VCSH_COMMAND_PARAMETER" && echo "$VCSH_REPO_NAME: $VCSH_FILE"
+		done
+	done | sort -u
+}
 
-elif [ "$1" = 'exit' ]; then
-	if [[ $VCSH_NO_IGNORE_EOF -gt 0 ]]; then
-		unset VCSH_NO_IGNORE_EOF
-		setopt NO_IGNORE_EOF
+write_gitignore() {
+	# Don't do anything if the user does not want to write gitignore
+	if [ "x$VCSH_GITIGNORE" = 'xnone' ]; then
+		info "Not writing gitignore as '\$VCSH_GITIGNORE' is set to 'none'"
+		exit
+	fi
+
+	use
+	cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+	OLDIFS=$IFS
+	IFS=$(printf '\n\t')
+	gitignores=$(for file in $(git ls-files); do
+		while true; do
+			echo "$file"; new=${file%/*}
+			[ x"$file" = x"$new" ] && break
+			file=$new
+		done;
+	done | sort -u)
+
+	# Contrary to GNU mktemp, mktemp on BSD/OSX requires a template for temp files
+	# Using a template makes GNU mktemp default to $PWD and not #TMPDIR for tempfile location
+	# To make every OS happy, set full path explicitly
+	tempfile=$(mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX") || fatal "could not create tempfile: '${tempfile}'" 51
+
+	echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
+	for gitignore in $gitignores; do
+		echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
+		if [ "x$VCSH_GITIGNORE" = 'xrecursive' ] && [ -d "$gitignore" ]; then
+			{ echo "$gitignore/*" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
+		fi
+	done
+	IFS=$OLDIFS
+	if diff -N "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
+		rm -f "$tempfile" || error "could not delete '$tempfile'"
+		exit
+	fi
+	if [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ]; then
+		info "'$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' differs from new data, moving it to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'"
+		mv -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak" ||
+			fatal "could not move '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'" 53
 	fi
-	leave
-	buildPS1
-	return 0
+	mv -f "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ||
+		fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
+}
+
+debug $(git version)
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+	fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+VCSH_COMMAND=$1; export VCSH_COMMAND
+
+case $VCSH_COMMAND in
+	clon|clo|cl) VCSH_COMMAND=clone;;
+	commi|comm|com|co) VCSH_COMMAND=commit;;
+	delet|dele|del|de) VCSH_COMMAND=delete;;
+	ente|ent|en) VCSH_COMMAND=enter;;
+	hel|he) VCSH_COMMAND=help;;
+	ini|in) VCSH_COMMAND=init;;
+	pul) VCSH_COMMAND=pull;;
+	pus) VCSH_COMMAND=push;;
+	renam|rena|ren|re) VCSH_COMMAND=rename;;
+	ru) VCSH_COMMAND=run;;
+	statu|stat|sta|st) VCSH_COMMAND=status;;
+	upgrad|upgra|upgr|up) VCSH_COMMAND=upgrade;;
+	versio|versi|vers|ver|ve) VCSH_COMMAND=version;;
+	which|whi|wh) VCSH_COMMAND=which;;
+	write|writ|wri|wr) VCSH_COMMAND=write-gitignore;;
+esac    
 
+if [ x"$VCSH_COMMAND" = x'clone' ]; then
+	[ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
+	GIT_REMOTE="$2"
+	[ -n "$3" ] && VCSH_REPO_NAME=$3 || VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+	[ -z "$VCSH_REPO_NAME" ] && fatal "$VCSH_COMMAND: could not determine repository name" 1
+	export VCSH_REPO_NAME
+	GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+elif [ "$VCSH_COMMAND" = 'version' ]; then
+	echo "$SELF $VERSION"
+	git version
+	exit
+elif [ x"$VCSH_COMMAND" = x'which' ]; then
+	[ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a filename" 1
+	[ -n "$3" ] && fatal "$VCSH_COMMAND: too many parameters" 1
+	VCSH_COMMAND_PARAMETER=$2; export VCSH_COMMAND_PARAMETER
+elif [ x"$VCSH_COMMAND" = x'delete' ]           ||
+     [ x"$VCSH_COMMAND" = x'enter' ]            ||
+     [ x"$VCSH_COMMAND" = x'init' ]             ||
+     [ x"$VCSH_COMMAND" = x'list-tracked-by' ]  ||
+     [ x"$VCSH_COMMAND" = x'rename' ]           ||
+     [ x"$VCSH_COMMAND" = x'run' ]              ||
+     [ x"$VCSH_COMMAND" = x'upgrade' ]          ||
+     [ x"$VCSH_COMMAND" = x'write-gitignore' ]; then
+	[ -z "$2" ]                                     && fatal "$VCSH_COMMAND: please specify repository to work on" 1
+	[ x"$VCSH_COMMAND" = x'rename' ] && [ -z "$3" ] && fatal "$VCSH_COMMAND: please specify a target name" 1
+	[ x"$VCSH_COMMAND" = x'run'    ] && [ -z "$3" ] && fatal "$VCSH_COMMAND: please specify a command" 1
+	VCSH_REPO_NAME=$2; export VCSH_REPO_NAME
+	GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+	[ x"$VCSH_COMMAND" = x'rename' ] && { VCSH_REPO_NAME_NEW=$3; export VCSH_REPO_NAME_NEW;
+	                                      GIT_DIR_NEW=$VCSH_REPO_D/$VCSH_REPO_NAME_NEW.git; export GIT_DIR_NEW; }
+	[ x"$VCSH_COMMAND" = x'run' ]    && shift 2
+elif [ x"$VCSH_COMMAND" = x'commit' ] ||
+     [ x"$VCSH_COMMAND" = x'list'   ] ||
+     [ x"$VCSH_COMMAND" = x'list-tracked' ] ||
+     [ x"$VCSH_COMMAND" = x'pull'   ] ||
+     [ x"$VCSH_COMMAND" = x'push'   ]; then
+	:
+elif [ x"$VCSH_COMMAND" = x'status' ]; then
+	VCSH_REPO_NAME=$2; export VCSH_REPO_NAME
+elif [ -n "$2" ]; then
+	VCSH_COMMAND='run'; export VCSH_COMMAND
+	VCSH_REPO_NAME=$1; export VCSH_REPO_NAME
+	GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+	[ -d "$GIT_DIR" ] || { help; exit 1; }
+	shift 1
+	set -- "git" "$@"
+elif [ -n "$VCSH_COMMAND" ]; then
+	VCSH_COMMAND='enter'; export VCSH_COMMAND
+	VCSH_REPO_NAME=$1; export VCSH_REPO_NAME
+	GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+	[ -d "$GIT_DIR" ] || { help; exit 1; }
 else
-	help
-	return 3
+	# $1 is empty, or 'help'
+	help && exit
+fi
 
+# Did we receive a directory instead of a name?
+# Mangle the input to fit normal operation.
+if echo "$VCSH_REPO_NAME" | grep -q '/'; then
+	GIT_DIR=$VCSH_REPO_NAME; export GIT_DIR
+	VCSH_REPO_NAME=$(basename "$VCSH_REPO_NAME" .git); export VCSH_REPO_NAME
 fi
 
+check_dir() {
+	check_directory="$1"
+	if [ ! -d "$check_directory" ]; then
+		if [ -e "$check_directory" ]; then
+			fatal "'$check_directory' exists but is not a directory" 13
+		else
+			verbose "attempting to create '$check_directory'"
+			mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
+		fi
+	fi
+}
+
+check_dir "$VCSH_REPO_D"
+[ ! "x$VCSH_GITIGNORE" = 'xnone' ] && check_dir "$VCSH_BASE/.gitignore.d"
+[ ! "x$VCSH_GITATTRIBUTES" = 'xnone' ] && check_dir "$VCSH_BASE/.gitattributes.d"
+
+verbose "$VCSH_COMMAND begin"
+VCSH_COMMAND=$(echo "$VCSH_COMMAND" | sed 's/-/_/g'); export VCSH_COMMAND
+hook pre-command
+$VCSH_COMMAND "$@"
+hook post-command
+verbose "$VCSH_COMMAND end, exiting"
+exit $VCSH_COMMAND_RETURN_CODE