X-Git-Url: https://git.madduck.net/code/vcsh.git/blobdiff_plain/f283bccb90c9bb61fbf1bb3b510970336d23261d..fbb76b4ff54910ef43bbbf08571a95ab3f6398ea:/README.md?ds=inline diff --git a/README.md b/README.md index 104114d..c58810b 100644 --- a/README.md +++ b/README.md @@ -1,39 +1,137 @@ -vcsh - manage and sync config files via git +vcsh - Version Control System for $HOME - multiple Git repositories in $HOME -# Introduction # -vcsh allows you to have several git repositories, all maintaining their working trees in $HOME without clobbering each other. -That, in turn, means you can have one repository per config set (zsh, vim, ssh, etc), picking and choosing which configs you want to use on which machine. +# Index -vcsh was designed with mr [1] in mind so you might want to install that, as well. +1. [30 second howto](#30-second-howto) +2. [Introduction](#introduction) +3. [Usage Exmaples](#usage-examples) +4. [Overview](#overview) +5. [Getting Started](#getting-started) +6. [Contact](#contact) -Read INSTALL.md for detailed setup instructions. -Questions? RichiH@{Freenode,OFTC,IRCnet} +# 30 second howto -## Comparison to Other Solutions ## +While it may appear that there's an overwhelming amount of documentation and +while the explanation of the concepts behind `vcsh` needs to touch a few gory +details of `git` internals, getting started with `vcsh` is extremely simple. -Most people who decide to put their dotfiles under version control start with a **single repository in $HOME**, adding all their dotfiles (and possibly more) to it. -This works, of course, but can become a nuisance as soon as you try to manage more than one host. +Let's say you want to version control your `vim` configuration: -The next logical step is to create single-purpose repositories in, for example, ~/.dotfiles and to create **symbolic links in $HOME**. -This gives you the flexibility to check out only certain repositories on different hosts. -The downsides of this approach are the necessary manual steps of cloning and symlinking the individual repositories. -It will probably become a nuisance when you try to manage more than two hosts. + vcsh init vim + vcsh vim add ~/.vimrc ~/.vim + vcsh vim commit -m 'Initial commit of my Vim configuration' + # optionally push your files to a remote + vcsh vim remote add origin + vcsh vim push -u origin master + # from now on you can push additional commits like this + vcsh vim push -vcsh takes this second approach one step further. -It expects single-purpose repositories and stores them in a hidden directory (similar to ~/.dotfiles). -However, it does not create symbolic links in $HOME; it puts the actual files right into $HOME. +If all that looks a _lot_ like standard `git`, that's no coincidence; it's +a design feature. -Furthermore, by making use of mr [1], it makes it very easy to enable/disable and clone a large number of repositories. -The use of mr is technically optional, but it will be an integral part of the proposed system that follows. -## Default Directory Layout ## +# Introduction + +[vcsh][vcsh] allows you to maintain several Git repositories in one single +directory. They all maintain their working trees without clobbering each other +or interfering otherwise. By default, all Git repositories maintained via +`vcsh` store the actual files in `$HOME` but you can override this setting if +you want to. + +All this means that you can have one repository per application or application +family, i.e. `zsh`, `vim`, `ssh`, etc. This, in turn, allows you to clone +custom sets of configurations onto different machines or even for different +users; picking and mixing which configurations you want to use where. +For example, you may not need to have your `mplayer` configuration on a server +or available to root and you may want to maintain different configuration for +`ssh` on your personal and your work machines. + +A lot of modern UNIX-based systems offer packages for `vcsh`. In case yours +does not read `INSTALL.md` for install instructions or `PACKAGING.md` to create +a package, yourself. If you do end up packaging `vcsh` please let us know so we +can give you your own packaging branch in the upstream repository. + +## Talks + +Some people found it useful to look at slides and videos explaining how `vcsh` +works instead of working through the docs. +All slides, videos, and further information can be found +[on the author's talk page][talks]. + + +# Usage Examples + +There are three different ways to interact with `vcsh` repositories; this +section will only show the simplest and easiest way. + +Certain more advanced use cases require the other two ways, but don't worry +about this for now. If you never even bother playing with the other two +modes you will still be fine. + +`vcsh enter` and `vcsh run` will be covered in later sections. + + +| Task | Command | +| ----------------------------------------------------- | ------------------------------------------------- | +| _Initialize a new repository called "vim"_ | `vcsh init vim` | +| _Clone an existing repository_ | `vcsh clone ` | +| _Add files to repository "vim"_ | `vcsh vim add ~/.vimrc ~/.vim` | +| | `vcsh vim commit -m 'Update Vim configuration'` | +| _Add a remote for repository "vim"_ | `vcsh vim remote add origin ` | +| | `vcsh vim push origin master:master` | +| | `vcsh vim branch --track master origin/master` | +| _Push to remote of repository "vim"_ | `vcsh vim push` | +| _Pull from remote of repository "vim"_ | `vcsh vim pull` | +| _Show status of changed files in all repositories_ | `vcsh status` | +| _Pull from all repositories_ | `vcsh pull` | +| _Push to all repositories_ | `vcsh push` | + + +# Overview + +## From zero to vcsh + +You put a lot of effort into your configuration and want to both protect and +distribute this configuration. + +Most people who decide to put their dotfiles under version control start with a +single repository in `$HOME`, adding all their dotfiles (and possibly more) +to it. This works, of course, but can become a nuisance as soon as you try to +manage more than one host. + +The next logical step is to create single-purpose repositories in, for example, +`~/.dotfiles` and to create symbolic links into `$HOME`. This gives you the +flexibility to check out only certain repositories on different hosts. The +downsides of this approach are the necessary manual steps of cloning and +symlinking the individual repositories. + +`vcsh` takes this approach one step further. It enables single-purpose +repositories and stores them in a hidden directory. However, it does not create +symbolic links in `$HOME`; it puts the actual files right into `$HOME`. + +As `vcsh` allows you to put an arbitrary number of distinct repositories into +your `$HOME`, you will end up with a lot of repositories very quickly. + +`vcsh` was designed with [myrepos][myrepos], a tool to manage Multiple +Repositories, in mind and the two integrate very nicely. The myrepos tool +(`mr`) has native support for `vcsh` repositories and the configuration for +myrepos is just another set of files that you cat track with `vcsh` like any +other. This makes setting up any new machine a breeze. It can take literally +less than five minutes to go from standard installation to fully set up system. + +We suggest using [myrepos][myrepos] to manage both `vcsh` and other repositories. The +`mr` utility takes care of pulling in and pushing out new data for a variety of +version control systems. While the use of myrepos is technically optional, it will +be an integral part of the proposed system that follows. + +## Default Directory Layout To illustrate, this is what a possible directory structure looks like. $HOME - |-- .config + |-- $XDG_CONFIG_HOME (defaults to $HOME/.config) | |-- mr | | |-- available.d | | | |-- zsh.vcsh @@ -44,13 +142,14 @@ To illustrate, this is what a possible directory structure looks like. | | | |-- tmux.vcsh | | | |-- vim.vcsh | | | |-- vimperator.vcsh - | | | |-- snippets.git - | | |-- config.d - | | | |-- zsh.mrconfig -> ../available.d/zsh.mrconfig - | | | |-- gitconfigs.mrconfig -> ../available.d/gitconfigs.mrconfig - | | | |-- tmux.mrconfig -> ../available.d/tmux.mrconfig - | | | `-- vim.mrconfig -> ../available.d/vim.mrconfig + | | | `-- snippets.git + | | `-- config.d + | | |-- zsh.vcsh -> ../available.d/zsh.vcsh + | | |-- gitconfigs.vcsh -> ../available.d/gitconfigs.vcsh + | | |-- tmux.vcsh -> ../available.d/tmux.vcsh + | | `-- vim.vcsh -> ../available.d/vim.vcsh | `-- vcsh + | |-- config | `-- repo.d | |-- zsh.git -----------+ | |-- gitconfigs.git | @@ -58,50 +157,291 @@ To illustrate, this is what a possible directory structure looks like. | `-- vim.git | |-- [...] | |-- .zshrc <----------------------+ - |-- .gitignore + |-- .gitignore.d + | `-- zsh |-- .mrconfig `-- .mrtrust -In this setup, ~/.mrconfig looks like: +### available.d - [DEFAULT] - jobs = 5 - include = cat ~/.config/mr/config.d/* +The files you see in $XDG\_CONFIG\_HOME/mr/available.d are myrepos +configuration files that contain the commands to manage (checkout, update +etc.) a single repository. vcsh repo configs end in .vcsh, git configs end +in .git, etc. This is optional and your preference. For example, this is +what a zsh.vcsh with read-only access to my zshrc repo looks likes. I.e. in +this specific example, push can not work as you will be using the author's +repository. This is for demonstration, only. Of course, you are more than +welcome to clone from this repository and fork your own. + + [$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git] + checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh + update = vcsh zsh pull + push = vcsh zsh push + status = vcsh zsh status + gc = vcsh zsh gc + +### config.d -The files you see in ~/.config/mr/available.d are mr configuration files that contain the commands to manage (checkout, update etc.) a single repository. -vcsh repo configs end in .vcsh, git configs end in .git, etc. This is optional and your preference. -For example, this is what a zsh.mrconfig with read-only access to my zshrc repo looks likes. I.e. in this specific example, push can not work. +$XDG\_CONFIG\_HOME/mr/available.d contains *all available* repositories. Only +files/links present in mr/config.d, however, will be used by myrepos. That means +that in this example, only the zsh, gitconfigs, tmux and vim repositories will +be checked out. A simple `mr update` run in $HOME will clone or update those +four repositories listed in config.d. - [$HOME/.config/vcsh/repo.d/zsh.git] - checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' - update = vcsh run bash git pull - push = vcsh run bash git push - status = vcsh run bash git status +### ~/.mrconfig -~/.config/mr/available.d contains *all available* repositories. -Only files/links present in mr/config.d, however, will be used by mr. -That means that in this example, only the zsh, gitconfigs, tmux and vim repositories will be checked out. -A simple `mr update` run in $HOME will clone or update those four repositories listed in config.d. +Finally, ~/.mrconfig will tie together all those single files which will allow +you to conveniently run `mr up` etc. to manage all repositories. It looks like +this: -~/.config/vcsh/repo.d is the directory where vcsh clones the git repositories into. -Since their working trees are configured to be in $HOME, the files contained in those repositories will be put in $HOME directly (see .bashrc above). + [DEFAULT] + include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/* + +### repo.d + +$XDG\_CONFIG\_HOME/vcsh/repo.d is the directory where all git repositories which +are under vcsh's control are located. Since their working trees are configured +to be in $HOME, the files contained in those repositories will be put in $HOME +directly. + +Of course, [myrepos][myrepos] will work with this layout if configured according to +this document (see above). -vcsh will check if any file it would want to create exists. If it exists, vcsh will throw a warning and exit. Move away your old config and try again. Optionally, merge your local and your global configs afterwards and push with `vcsh run foo git push`. +vcsh will check if any file it would want to create exists. If it exists, vcsh +will throw a warning and exit. Move away your old config and try again. +Optionally, merge your local and your global configs afterwards and push with +`vcsh foo push`. -## Moving into a New Host ## +## Moving into a New Host -To illustrate further, the following steps could move your desired configuration to a new host. +To illustrate further, the following steps could move your desired +configuration to a new host. -1. Clone the mr repository (containing available.d, config.d etc.), for example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git` -2. Choose your repositories by linking them in config.d (or go with the default you may have already configured by adding symlinks to git). -3. Run mr to clone the repositories: `cd; mr update`. +1. Clone the myrepos repository (containing available.d, config.d etc.); for + example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr` +2. Choose your repositories by linking them in config.d (or go with the default + you may have already configured by adding symlinks to git). +3. Run myrepos to clone the repositories: `cd; mr update`. 4. Done. Hopefully the above could help explain how this approach saves time by -1. making it easy to manage, clone and update a large number of repositories (thanks to mr) and +1. making it easy to manage, clone and update a large number of repositories + (thanks to myrepos) and 2. making it unnecessary to create symbolic links in $HOME (thanks to vcsh). ----------- +If you want to give vcsh a try, follow the instructions below. + + +# Getting Started + +Below, you will find a few different methods for setting up vcsh: + +1. The Template Way +2. The Steal-from-Template Way +3. The Manual Way + +### The Template Way + +#### Prerequisites + +Make sure none of the following files and directories exist for your test +(user). If they do, move them away for now: + +* ~/.gitignore.d +* ~/.mrconfig +* $XDG\_CONFIG\_HOME/mr/available.d/mr.vcsh +* $XDG\_CONFIG\_HOME/mr/available.d/zsh.vcsh +* $XDG\_CONFIG\_HOME/mr/config.d/mr.vcsh +* $XDG\_CONFIG\_HOME/vcsh/repo.d/mr.git/ + +All of the files are part of the template repository, the directory is where +the template will be stored. + + apt-get install myrepos + +### Install vcsh + +#### Debian + +If you are using Debian Squeeze, you will need to enable backports. +From Wheezy onwards, you can install it directly: + + apt-get install vcsh + +#### Gentoo + +To install vcsh in Gentoo Linux just give the following command as root: + + emerge dev-vcs/vcsh + +#### Arch Linux + +vcsh is availabe via [AUR](https://aur.archlinux.org/packages.php?ID=54164) +and further documentation about the use of AUR is available +[on Arch's wiki](https://wiki.archlinux.org/index.php/Arch_User_Repository). + + cd /var/abs/local/ + wget https://aur.archlinux.org/packages/vc/vcsh-git/vcsh-git.tar.gz + tar xfz vcsh-git.tar.gz + cd vcsh-git + makepkg -s + pacman -U vcsh*.pkg.tar.xz + +#### From source + + # choose a location for your checkout + mkdir -p ~/work/git + cd ~/work/git + git clone git://github.com/RichiH/vcsh.git + cd vcsh + sudo ln -s vcsh /usr/local/bin # or add it to your PATH + cd + +#### Clone the Template + + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + +#### Enable Your Test Repository + + mv ~/.zsh ~/zsh.bak + mv ~/.zshrc ~/zshrc.bak + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/zsh.vcsh . # link, and thereby enable, the zsh repository + cd + mr up + +#### Set Up Your Own Repositories + +Now, it's time to edit the template config and fill it with your own remotes: + + vim $XDG_CONFIG_HOME/mr/available.d/mr.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/zsh.vcsh + +And then create your own stuff: + + vcsh init foo + vcsh foo add bar baz quux + vcsh foo remote add origin git://quuux + vcsh foo commit + vcsh foo push + + cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh + vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo + +Done! + +### The Steal-from-Template Way + +You're welcome to clone the example repository: + + vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr + # make sure 'include = cat /usr/share/mr/vcsh' points to an exiting file + vim .mrconfig + +Look around in the clone. It should be reasonably simple to understand. If not, +poke me, RichiH, on Freenode (query) or OFTC (#vcs-home). + + +### The Manual Way + +This is how my old setup procedure looked like. Adapt it to your own style or +copy mine verbatim, either is fine. + + # Create workspace + mkdir -p ~/work/git + cd !$ + + # Clone vcsh and make it available + git clone git://github.com/RichiH/vcsh.git vcsh + sudo ln -s ~/work/git/vcsh/vcsh /usr/bin/local + hash -r + +Grab my myrepos config. see below for details on how I set this up + + vcsh clone ssh:///mr.git + cd $XDG_CONFIG_HOME/mr/config.d/ + ln -s ../available.d/* . + + +myrepos is used to actually retrieve configs, etc + + ~ % cat ~/.mrconfig + [DEFAULT] + # adapt /usr/share/mr/vcsh to your system if needed + include = cat /usr/share/mr/vcsh + include = cat $XDG_CONFIG_HOME/mr/config.d/* + ~ % echo $XDG_CONFIG_HOME + /home/richih/.config + ~ % ls $XDG_CONFIG_HOME/mr/available.d # random selection of my repos + git-annex gitk.vcsh git.vcsh ikiwiki mr.vcsh reportbug.vcsh snippets.git wget.vcsh zsh.vcsh + ~ % + # then simply ln -s whatever you want on your local machine from + # $XDG_CONFIG_HOME/mr/available.d to $XDG_CONFIG_HOME/mr/config.d + ~ % cd + ~ % mr -j 5 up + + +# myrepos usage ; will be factored out & rewritten + +### Keeping repositories Up-to-Date + +This is the beauty of it all. Once you are set up, just run: + + mr up + mr push + +Neat. + +### Making Changes + +After you have made some changes, for which you would normally use `git add` +and `git commit`, use the vcsh wrapper (like above): + + vcsh foo add bar baz quux + vcsh foo commit + vcsh foo push + +### Using vcsh without myrepos + +vcsh encourages you to use [myrepos][myrepos]. It helps you manage a large number of +repositories by running the necessary vcsh commands for you. You may choose not +to use myrepos, in which case you will have to run those commands manually or by +other means. + + +To initialize a new repository: `vcsh init zsh` + +To clone a repository: `vcsh clone ssh:///zsh.git` + +To interact with a repository, use the regular Git commands, but prepend them +with `vcsh run $repository_name`. For example: + + vcsh zsh status + vcsh zsh add .zshrc + vcsh zsh commit + +Obviously, without myrepos keeping repositories up-to-date, it will have to be done +manually. Alternatively, you could try something like this: + + for repo in `vcsh list`; do + vcsh run $repo git pull; + done + + +# Contact + +There are several ways to get in touch with the author and a small but committed +community around the general idea of version controlling your (digital) life. + +* IRC: #vcs-home on irc.oftc.net + +* Mailing list: [http://lists.madduck.net/listinfo/vcs-home][vcs-home-list] + +* Pull requests or issues on [https://github.com/RichiH/vcsh][vcsh] + -[1] http://kitenet.net/~joey/code/mr/ +[myrepos]: http://myrepos.branchable.com/ +[talks]: http://richardhartmann.de/talks/ +[vcsh]: https://github.com/RichiH/vcsh +[vcs-home-list]: http://lists.madduck.net/listinfo/vcs-home