From: Luke Bonham Date: Sat, 7 Sep 2013 10:16:55 +0000 (-0700) Subject: Created Layouts (markdown) X-Git-Url: https://git.madduck.net/etc/awesome.git/commitdiff_plain/877e48a7a9f1db1d8ef773bcb0b6a7c728ef2858?hp=f7dc89c8fdb9eba9ce2ce4743f52b6f19874fcf0 Created Layouts (markdown) --- diff --git a/Layouts.md b/Layouts.md new file mode 100644 index 0000000..b5aacc5 --- /dev/null +++ b/Layouts.md @@ -0,0 +1,271 @@ +Currently, there are **7** layouts. + + lain/layout + . + |-- cascade + |-- cascadetile + |-- centerwork + |-- termfair + |-- uselessfair + |-- uselesspiral + `-- uselesstile + +Just add your favourites to ``layouts`` table: + + layouts = + { + ... + lain.layout.termfair, + lain.layout.uselesstile, + ... + } + +Or set them on specific tags like this: + + awful.layout.set(lain.layout.uselessfair, tags[1][7]) + +How do layouts work? +========================= + +cascade +------- + +Cascade all windows of a tag. + +You can control the offsets by setting those two variables: + + lain.layout.cascade.cascade_offset_x = 64 + lain.layout.cascade.cascade_offset_y = 16 + +The following reserves space for 5 windows: + + lain.layout.cascade.nmaster = 5 + +That is, no window will get resized upon the creation of a new window, +unless there's more than 5 windows. + +cascadetile +----------- + +Similar to `awful.layout.suit.tile` layout, however, clients in the slave +column are cascaded instead of tiled. + +Left column size can be set, otherwise is controlled by `mwfact` of the +tag. Additional windows will be opened in another column on the right. +New windows are placed above old windows. + +Whether the slave column is placed on top of the master window or not is +controlled by the value of `ncol`. A value of 1 means "overlapping slave column" +and anything else means "don't overlap windows". + +Usage example: + + lain.layout.cascadetile.cascade_offset_x = 2 + lain.layout.cascadetile.cascade_offset_y = 32 + lain.layout.cascadetile.extra_padding = 5 + lain.layout.cascadetile.nmaster = 5 + lain.layout.ncol = 1 + +`extra_padding` reduces the size of the master window if "overlapping +slave column" is activated. This allows you to see if there are any +windows in your slave column. + +Setting `cascade_offset_x` to a very small value or even 0 is reccommended to avoid wasting space. + +centerwork +---------- + +You start with one window, centered horizontally: + + +--------------------------+ + | +----------+ | + | | | | + | | | | + | | | | + | | MAIN | | + | | | | + | | | | + | | | | + | | | | + | +----------+ | + +--------------------------+ + +This is your main working window. You do most of the work right here. +Sometimes, you may want to open up additional windows. They're put in +the following four slots: + + +--------------------------+ + | +---+ +----------+ +---+ | + | | | | | | | | + | | 0 | | | | 1 | | + | | | | | | | | + | +---+ | MAIN | +---+ | + | +---+ | | +---+ | + | | | | | | | | + | | 2 | | | | 3 | | + | | | | | | | | + | +---+ +----------+ +---+ | + +--------------------------+ + +Yes, the number "four" is fixed. In total, you can only have five open +windows with this layout. Additional windows are not managed and set to +floating mode. **This is intentional**. + +You can set the order of the four auxiliary windows. This is the default +configuration: + + lain.layout.centerwork.top_left = 0 + lain.layout.centerwork.top_right = 1 + lain.layout.centerwork.bottom_left = 2 + lain.layout.centerwork.bottom_right = 3 + +This means: The bottom left slot will be occupied by the third window +(not counting the main window). Suppose you want your windows to appear +in this order: + + +--------------------------+ + | +---+ +----------+ +---+ | + | | | | | | | | + | | 3 | | | | 0 | | + | | | | | | | | + | +---+ | MAIN | +---+ | + | +---+ | | +---+ | + | | | | | | | | + | | 2 | | | | 1 | | + | | | | | | | | + | +---+ +----------+ +---+ | + +--------------------------+ + +This would require you to use these settings: + + lain.layout.centerwork.top_left = 3 + lain.layout.centerwork.top_right = 0 + lain.layout.centerwork.bottom_left = 2 + lain.layout.centerwork.bottom_right = 1 + +*Please note:* If you use Awesome's default configuration, navigation in +this layout may be very confusing. How do you get from the main window +to satellite ones depends on the order in which the windows are opened. +Thus, use of `awful.client.focus.bydirection()` is suggested. +Here's an example: + + globalkeys = awful.util.table.join( + ... + awful.key({ modkey }, "j", + function() + awful.client.focus.bydirection("down") + if client.focus then client.focus:raise() end + end), + awful.key({ modkey }, "k", + function() + awful.client.focus.bydirection("up") + if client.focus then client.focus:raise() end + end), + awful.key({ modkey }, "h", + function() + awful.client.focus.bydirection("left") + if client.focus then client.focus:raise() end + end), + awful.key({ modkey }, "l", + function() + awful.client.focus.bydirection("right") + if client.focus then client.focus:raise() end + end), + ... + ) + +termfair +-------- + +I do a lot of work on terminals. The common tiling algorithms usually +maximize windows, so you'll end up with a terminal that has about 200 +columns or more. That's way too much. Have you ever read a manpage in a +terminal of this size? + +This layout restricts the size of each window. Each window will have the +same width but is variable in height. Furthermore, windows are +left-aligned. The basic workflow is as follows (the number above the +screen is the number of open windows, the number in a cell is the fixed +number of a client): + + (1) (2) (3) + +---+---+---+ +---+---+---+ +---+---+---+ + | | | | | | | | | | | | + | 1 | | | -> | 2 | 1 | | -> | 3 | 2 | 1 | -> + | | | | | | | | | | | | + +---+---+---+ +---+---+---+ +---+---+---+ + + (4) (5) (6) + +---+---+---+ +---+---+---+ +---+---+---+ + | 4 | | | | 5 | 4 | | | 6 | 5 | 4 | + +---+---+---+ -> +---+---+---+ -> +---+---+---+ + | 3 | 2 | 1 | | 3 | 2 | 1 | | 3 | 2 | 1 | + +---+---+---+ +---+---+---+ +---+---+---+ + +The first client will be located in the left column. When opening +another window, this new window will be placed in the left column while +moving the first window into the middle column. Once a row is full, +another row above it will be created. + +Default number of columns and rows are respectively taken from `nmaster` +and `ncol` values in `awful.tag`, but you can set your own. + +For example, this sets `termfair` to 3 columns and at least 1 row: + + lain.layout.termfair.nmaster = 3 + lain.layout.termfair.ncol = 1 + +uselessfair, uselesspiral & uselesstile +--------------------------------------- +These are duplicates of the stock `fair`, `spiral` and `tile` layouts. +However, "useless gaps" (see below) have been added. + +Useless gaps +============ + +Useless gaps are gaps between windows. They are "useless" because they +serve no special purpose despite increasing overview. I find it easier +to recognize window boundaries if windows are set apart a little bit. + +The `uselessfair` layout, for example, looks like this: + + +================+ + # # + # +---+ +---+ # + # | 1 | | | # + # +---+ | | # + # | 3 | # + # +---+ | | # + # | 2 | | | # + # +---+ +---+ # + # # + +================+ + +All of lain layouts provide useless gaps. To set the width of the gaps, +you have to add an item called `useless_gap_width` in your `theme.lua`. +If it doesn't exist, the width will default to 0. +Example: + + ... + theme.useless_gap_width = "5" + ... + +What about layout icons? +======================== + +They are located in ``lain/icons/layout``. + +To use them, add lines to your ``theme.lua`` like this: + + ... + theme.lain_icons = os.getenv("HOME") .. "/.config/awesome/lain/icons/layout/default/" + theme.layout_termfair = theme.lain_icons .. "termfairw.png" + theme.layout_cascade = theme.lain_icons .. "cascadew.png" + theme.layout_cascadetile = theme.lain_icons .. "cascadetilew.png" + theme.layout_centerwork = theme.lain_icons .. "centerworkw.png" + ... + +Credits goes to [Nicolas Estibals](https://github.com/nestibal) for creating +layout icons for default theme. + +You can use them as a template for your custom versions. \ No newline at end of file