X-Git-Url: https://git.madduck.net/etc/mutt.git/blobdiff_plain/ba9d8139aa1877612fda374dd5257d209badc516..a5ab5741acbc36d8f5d8a527639edaad4143f2f8:/.mutt/muttrc?ds=sidebyside diff --git a/.mutt/muttrc b/.mutt/muttrc index 897c479..61401d9 100644 --- a/.mutt/muttrc +++ b/.mutt/muttrc @@ -1,4438 +1,22 @@ # from /usr/share/doc/mutt/examples/Muttrc.gz -set my_confdir="~/.mutt" +set my_confdir="$HOME/.mutt" -# set abort_nosubject=ask-yes -# -# Name: abort_nosubject -# Type: quadoption -# Default: ask-yes -# -# -# If set to yes, when composing messages and no subject is given -# at the subject prompt, composition will be aborted. If set to -# no, composing messages with no subject given at the subject -# prompt will never be aborted. -# -# -# set abort_unmodified=yes -# -# Name: abort_unmodified -# Type: quadoption -# Default: yes -# -# -# If set to yes, composition will automatically abort after -# editing the message body if no changes are made to the file (this -# check only happens after the first edit of the file). When set -# to no, composition will never be aborted. -# -# -# set alias_file="~/.muttrc" -# -# Name: alias_file -# Type: path -# Default: "~/.muttrc" -# -set alias_file="$my_confdir/aliases" -source $my_confdir/aliases -# -# The default file in which to save aliases created by the -# ``create-alias'' function. -# -# Note: Mutt will not automatically source this file; you must -# explicitly use the ``source'' command for it to be executed. -# -# The default for this option is the currently used muttrc file, or -# ``~/.muttrc'' if no user muttrc was found. -# -# -# set alias_format="%4n %2f %t %-10a %r" -# -# Name: alias_format -# Type: string -# Default: "%4n %2f %t %-10a %r" -# -# -# Specifies the format of the data displayed for the `alias' menu. The -# following printf(3)-style sequences are available: -# -# %a alias name -# %f flags - currently, a "d" for an alias marked for deletion -# %n index number -# %r address which alias expands to -# %t character which indicates if the alias is tagged for inclusion -# -# -# set allow_8bit=yes -# -# Name: allow_8bit -# Type: boolean -# Default: yes -# -# -# Controls whether 8-bit data is converted to 7-bit using either Quoted- -# Printable or Base64 encoding when sending mail. -# -# -# set allow_ansi=no -# -# Name: allow_ansi -# Type: boolean -# Default: no -# -# -# Controls whether ANSI color codes in messages (and color tags in -# rich text messages) are to be interpreted. -# Messages containing these codes are rare, but if this option is set, -# their text will be colored accordingly. Note that this may override -# your color choices, and even present a security problem, since a -# message could include a line like "[-- PGP output follows ..." and -# give it the same color as your attachment color. -# -# -# set arrow_cursor=no -# -# Name: arrow_cursor -# Type: boolean -# Default: no -# -# -# When set, an arrow (``->'') will be used to indicate the current entry -# in menus instead of highlighting the whole line. On slow network or modem -# links this will make response faster because there is less that has to -# be redrawn on the screen when moving to the next or previous entries -# in the menu. -# -# -# set ascii_chars=no -# -# Name: ascii_chars -# Type: boolean -# Default: no -# -# -# If set, Mutt will use plain ASCII characters when displaying thread -# and attachment trees, instead of the default ACS characters. -# -# -# set askbcc=no -# -# Name: askbcc -# Type: boolean -# Default: no -# -# -# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients -# before editing an outgoing message. -# -# -# set askcc=no -# -# Name: askcc -# Type: boolean -# Default: no -# -# -# If set, Mutt will prompt you for carbon-copy (Cc) recipients before -# editing the body of an outgoing message. -# -# -# set assumed_charset="" -# -# Name: assumed_charset -# Type: string -# Default: "" -# -# -# This variable is a colon-separated list of character encoding -# schemes for messages without character encoding indication. -# Header field values and message body content without character encoding -# indication would be assumed that they are written in one of this list. -# By default, all the header fields and message body without any charset -# indication are assumed to be in "us-ascii". -# -# For example, Japanese users might prefer this: -# -# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" -# -# However, only the first content is valid for the message body. -# -# -# set attach_charset="" -# -# Name: attach_charset -# Type: string -# Default: "" -# -# -# This variable is a colon-separated list of character encoding -# schemes for text file attachments. -# If unset, $charset value will be used instead. -# For example, the following configuration would work for Japanese -# text handling: -# -# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" -# -# Note: "iso-2022-*" must be put at the head of the value as shown above -# if included. -# -# -# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " -# -# Name: attach_format -# Type: string -# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " -# -# -# This variable describes the format of the `attachment' menu. The -# following printf-style sequences are understood: -# -# %C charset -# %c requires charset conversion (n or c) -# %D deleted flag -# %d description -# %e MIME content-transfer-encoding -# %f filename -# %I disposition (I=inline, A=attachment) -# %m major MIME type -# %M MIME subtype -# %n attachment number -# %Q "Q", if MIME part qualifies for attachment counting -# %s size -# %t tagged flag -# %T graphic tree characters -# %u unlink (=to delete) flag -# %X number of qualifying MIME parts in this part and its children -# (please see the ``attachments'' section for possible speed effects) -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# -# -# set attach_sep="\n" -# -# Name: attach_sep -# Type: string -# Default: "\n" -# -# -# The separator to add between attachments when operating (saving, -# printing, piping, etc) on a list of tagged attachments. -# -# -# set attach_split=yes -# -# Name: attach_split -# Type: boolean -# Default: yes -# -# -# If this variable is unset, when operating (saving, printing, piping, -# etc) on a list of tagged attachments, Mutt will concatenate the -# attachments and will operate on them as a single attachment. The -# ``$attach_sep'' separator is added after each attachment. When set, -# Mutt will operate on the attachments one by one. -# -# -# set attribution="On %d, %n wrote:" -# -# Name: attribution -# Type: string -# Default: "On %d, %n wrote:" -# -# -# This is the string that will precede a message which has been included -# in a reply. For a full listing of defined printf()-like sequences see -# the section on ``$index_format''. -# -set attribution="also sprach %n <%a> [%[%Y.%m.%d.%H%M %z]]:" -# -# set autoedit=no -# -# Name: autoedit -# Type: boolean -# Default: no -# -# -# When set along with ``$edit_headers'', Mutt will skip the initial -# send-menu and allow you to immediately begin editing the body of your -# message. The send-menu may still be accessed once you have finished -# editing the body of your message. -# -# Also see ``$fast_reply''. -# -set autoedit -# -# set auto_tag=no -# -# Name: auto_tag -# Type: boolean -# Default: no -# -# -# When set, functions in the index menu which affect a message -# will be applied to all tagged messages (if there are any). When -# unset, you must first use the tag-prefix function (default: ";") to -# make the next function apply to all tagged messages. -# -# -# set beep=yes -# -# Name: beep -# Type: boolean -# Default: yes -# -# -# When this variable is set, mutt will beep when an error occurs. -# -set beep=no -# -# set beep_new=no -# -# Name: beep_new -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will beep whenever it prints a message -# notifying you of new mail. This is independent of the setting of the -# ``$beep'' variable. -# -# -# set bounce=ask-yes -# -# Name: bounce -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether you will be asked to confirm bouncing messages. -# If set to yes you don't get asked if you want to bounce a -# message. Setting this variable to no is not generally useful, -# and thus not recommended, because you are unable to bounce messages. -# -# -# set bounce_delivered=yes -# -# Name: bounce_delivered -# Type: boolean -# Default: yes -# -# -# When this variable is set, mutt will include Delivered-To headers when -# bouncing messages. Postfix users may wish to unset this variable. -# -# Note: On Debian systems, this option is unset by default in -# /etc/Muttrc. -# -# -# set braille_friendly=no -# -# Name: braille_friendly -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will place the cursor at the beginning -# of the current line in menus, even when the arrow_cursor variable -# is unset, making it easier for blind persons using Braille displays to -# follow these menus. The option is disabled by default because many -# visual terminals don't permit making the cursor invisible. -# -# -# set check_mbox_size=no -# -# Name: check_mbox_size -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will use file size attribute instead of -# access time when checking for new mail. -# -# -# set charset="" -# -# Name: charset -# Type: string -# Default: "" -# -# -# Character set your terminal uses to display and enter textual data. -# -# -# set check_new=yes -# -# Name: check_new -# Type: boolean -# Default: yes -# -# -# Note: this option only affects maildir and MH style -# mailboxes. -# -# When set, Mutt will check for new mail delivered while the -# mailbox is open. Especially with MH mailboxes, this operation can -# take quite some time since it involves scanning the directory and -# checking each file to see if it has already been looked at. If -# check_new is unset, no check for new mail is performed -# while the mailbox is open. -# -# -# set collapse_unread=yes -# -# Name: collapse_unread -# Type: boolean -# Default: yes -# -# -# When unset, Mutt will not collapse a thread if it contains any -# unread messages. -# -# -# set uncollapse_jump=no -# -# Name: uncollapse_jump -# Type: boolean -# Default: no -# -# -# When set, Mutt will jump to the next unread message, if any, -# when the current thread is uncollapsed. -# -# -# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" -# -# Name: compose_format -# Type: string -# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" -# -# -# Controls the format of the status line displayed in the Compose -# menu. This string is similar to ``$status_format'', but has its own -# set of printf()-like sequences: -# -# %a total number of attachments -# %h local hostname -# %l approximate size (in bytes) of the current message -# %v Mutt version string -# -# -# See the text describing the ``$status_format'' option for more -# information on how to set ``$compose_format''. -# -# -# set config_charset="" -# -# Name: config_charset -# Type: string -# Default: "" -# -# -# When defined, Mutt will recode commands in rc files from this -# encoding. -# -# -# set confirmappend=yes -# -# Name: confirmappend -# Type: boolean -# Default: yes -# -# -# When set, Mutt will prompt for confirmation when appending messages to -# an existing mailbox. -# -set confirmappend=no -# -# set confirmcreate=yes -# -# Name: confirmcreate -# Type: boolean -# Default: yes -# -# -# When set, Mutt will prompt for confirmation when saving messages to a -# mailbox which does not yet exist before creating it. -# -# -# set connect_timeout=30 -# -# Name: connect_timeout -# Type: number -# Default: 30 -# -# -# Causes Mutt to timeout a network connection (for IMAP or POP) after this -# many seconds if the connection is not able to be established. A negative -# value causes Mutt to wait indefinitely for the connection to succeed. -# -# -# set content_type="text/plain" -# -# Name: content_type -# Type: string -# Default: "text/plain" -# -# -# Sets the default Content-Type for the body of newly composed messages. -# -# -# set copy=yes -# -# Name: copy -# Type: quadoption -# Default: yes -# -# -# This variable controls whether or not copies of your outgoing messages -# will be saved for later references. Also see ``$record'', -# ``$save_name'', ``$force_name'' and ``fcc-hook''. -# -set copy=yes -# -# set crypt_use_gpgme=no -# -# Name: crypt_use_gpgme -# Type: boolean -# Default: no -# -# -# This variable controls the use of the GPGME-enabled crypto backends. -# If it is set and Mutt was built with gpgme support, the gpgme code for -# S/MIME and PGP will be used instead of the classic code. Note that -# you need to set this option in .muttrc; it won't have any effect when -# used interactively. -# -# -# set crypt_use_pka=no -# -# Name: crypt_use_pka -# Type: boolean -# Default: no -# -# -# (http://www.g10code.de/docs/pka-intro.de.pdf) during signature -# verification (only supported by the GPGME backend). -# -# -# set crypt_autopgp=yes -# -# Name: crypt_autopgp -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not mutt may automatically enable -# PGP encryption/signing for messages. See also ``$crypt_autoencrypt'', -# ``$crypt_replyencrypt'', -# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. -# -# -# set crypt_autosmime=yes -# -# Name: crypt_autosmime -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not mutt may automatically enable -# S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'', -# ``$crypt_replyencrypt'', -# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. -# -# -# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z" -# -# Name: date_format -# Type: string -# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z" -# -# -# This variable controls the format of the date printed by the ``%d'' -# sequence in ``$index_format''. This is passed to the strftime -# call to process the date. See the man page for strftime(3) for -# the proper syntax. -# -# Unless the first character in the string is a bang (``!''), the month -# and week day names are expanded according to the locale specified in -# the variable ``$locale''. If the first character in the string is a -# bang, the bang is discarded, and the month and week day names in the -# rest of the string are expanded in the C locale (that is in US -# English). -# -set date_format="%d %b %Y %T%Z" -# -# set default_hook="~f %s !~P | (~P ~C %s)" -# -# Name: default_hook -# Type: string -# Default: "~f %s !~P | (~P ~C %s)" -# -# -# This variable controls how message-hooks, reply-hooks, send-hooks, -# send2-hooks, save-hooks, and fcc-hooks will -# be interpreted if they are specified with only a simple regexp, -# instead of a matching pattern. The hooks are expanded when they are -# declared, so a hook will be interpreted according to the value of this -# variable at the time the hook is declared. The default value matches -# if the message is either from a user matching the regular expression -# given, or if it is from you (if the from address matches -# ``alternates'') and is to or cc'ed to a user matching the given -# regular expression. -# -# -# set delete=ask-yes -# -# Name: delete -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not messages are really deleted when closing or -# synchronizing a mailbox. If set to yes, messages marked for -# deleting will automatically be purged without prompting. If set to -# no, messages marked for deletion will be kept in the mailbox. -# -set delete=yes -# -# set delete_untag=yes -# -# Name: delete_untag -# Type: boolean -# Default: yes -# -# -# If this option is set, mutt will untag messages when marking them -# for deletion. This applies when you either explicitly delete a message, -# or when you save it to another folder. -# -# -# set digest_collapse=yes -# -# Name: digest_collapse -# Type: boolean -# Default: yes -# -# -# If this option is set, mutt's received-attachments menu will not show the subparts of -# individual messages in a multipart/digest. To see these subparts, press 'v' on that menu. -# -# -# set display_filter="" -# -# Name: display_filter -# Type: path -# Default: "" -# -# -# When set, specifies a command used to filter messages. When a message -# is viewed it is passed as standard input to $display_filter, and the -# filtered message is read from the standard output. -# -# -# set dotlock_program="/usr/bin/mutt_dotlock" -# -# Name: dotlock_program -# Type: path -# Default: "/usr/bin/mutt_dotlock" -# -# -# Contains the path of the mutt_dotlock (8) binary to be used by -# mutt. -# -# -# set dsn_notify="" -# -# Name: dsn_notify -# Type: string -# Default: "" -# -# -# Note: you should not enable this unless you are using Sendmail -# 8.8.x or greater. -# -# This variable sets the request for when notification is returned. The -# string consists of a comma separated list (no spaces!) of one or more -# of the following: never, to never request notification, -# failure, to request notification on transmission failure, -# delay, to be notified of message delays, success, to be -# notified of successful transmission. -# -# Example: set dsn_notify="failure,delay" -# -# -# set dsn_return="" -# -# Name: dsn_return -# Type: string -# Default: "" -# -# -# Note: you should not enable this unless you are using Sendmail -# 8.8.x or greater. -# -# This variable controls how much of your message is returned in DSN -# messages. It may be set to either hdrs to return just the -# message header, or full to return the full message. -# -# Example: set dsn_return=hdrs -# -# -# set duplicate_threads=yes -# -# Name: duplicate_threads -# Type: boolean -# Default: yes -# -# -# This variable controls whether mutt, when sorting by threads, threads -# messages with the same message-id together. If it is set, it will indicate -# that it thinks they are duplicates of each other with an equals sign -# in the thread diagram. -# -# -# set edit_headers=no -# -# Name: edit_headers -# Type: boolean -# Default: no -# -# -# This option allows you to edit the header of your outgoing messages -# along with the body of your message. -# -set edit_headers=yes -# -# set editor="" -# -# Name: editor -# Type: path -# Default: "" -# -# -# This variable specifies which editor is used by mutt. -# It defaults to the value of the VISUAL, or EDITOR, environment -# variable, or to the string "/usr/bin/editor" if neither of those are set. -# -set editor="~/.bin/mail/mailplate --edit --auto --keep-unknown" -# -# set encode_from=no -# -# Name: encode_from -# Type: boolean -# Default: no -# -# -# When set, mutt will quoted-printable encode messages when -# they contain the string "From " in the beginning of a line. -# Useful to avoid the tampering certain mail delivery and transport -# agents tend to do with messages. -# -# -# set envelope_from_address="" -# -# Name: envelope_from_address -# Type: e-mail address -# Default: "" -# -# -# Manually sets the envelope sender for outgoing messages. -# This value is ignored if ``$use_envelope_from'' is unset. -# -# -# set escape="~" -# -# Name: escape -# Type: string -# Default: "~" -# -# -# Escape character to use for functions in the builtin editor. -# -# -# set fast_reply=no -# -# Name: fast_reply -# Type: boolean -# Default: no -# -# -# When set, the initial prompt for recipients and subject are skipped -# when replying to messages, and the initial prompt for subject is -# skipped when forwarding messages. -# -# Note: this variable has no effect when the ``$autoedit'' -# variable is set. -# -set fast_reply=yes -# -# set fcc_attach=yes -# -# Name: fcc_attach -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not attachments on outgoing messages -# are saved along with the main body of your message. -# -# -# set fcc_clear=no -# -# Name: fcc_clear -# Type: boolean -# Default: no -# -# -# When this variable is set, FCCs will be stored unencrypted and -# unsigned, even when the actual message is encrypted and/or -# signed. -# (PGP only) -# -# -# set folder="~/Mail" -# -# Name: folder -# Type: path -# Default: "~/Mail" -# -# -# Specifies the default location of your mailboxes. A `+' or `=' at the -# beginning of a pathname will be expanded to the value of this -# variable. Note that if you change this variable from the default -# value you need to make sure that the assignment occurs before -# you use `+' or `=' for any other variables since expansion takes place -# during the `set' command. -# -set folder="~/mail" -# -# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" -# -# Name: folder_format -# Type: string -# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" -# -# -# This variable allows you to customize the file browser display to your -# personal taste. This string is similar to ``$index_format'', but has -# its own set of printf()-like sequences: -# -# %C current file number -# %d date/time folder was last modified -# %f filename -# %F file permissions -# %g group name (or numeric gid, if missing) -# %l number of hard links -# %N N if folder has new mail, blank otherwise -# %s size in bytes -# %t * if the file is tagged, blank otherwise -# %u owner name (or numeric uid, if missing) -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# -# -# set followup_to=yes -# -# Name: followup_to -# Type: boolean -# Default: yes -# -# -# Controls whether or not the Mail-Followup-To header field is -# generated when sending mail. When set, Mutt will generate this -# field when you are replying to a known mailing list, specified with -# the ``subscribe'' or ``lists'' commands. -# -# This field has two purposes. First, preventing you from -# receiving duplicate copies of replies to messages which you send -# to mailing lists, and second, ensuring that you do get a reply -# separately for any messages sent to known lists to which you are -# not subscribed. The header will contain only the list's address -# for subscribed lists, and both the list address and your own -# email address for unsubscribed lists. Without this header, a -# group reply to your message sent to a subscribed list will be -# sent to both the list and your address, resulting in two copies -# of the same email for you. -# -# -# set force_name=no -# -# Name: force_name -# Type: boolean -# Default: no -# -# -# This variable is similar to ``$save_name'', except that Mutt will -# store a copy of your outgoing message by the username of the address -# you are sending to even if that mailbox does not exist. -# -# Also see the ``$record'' variable. -# -# -# set forward_decode=yes -# -# Name: forward_decode -# Type: boolean -# Default: yes -# -# -# Controls the decoding of complex MIME messages into text/plain when -# forwarding a message. The message header is also RFC2047 decoded. -# This variable is only used, if ``$mime_forward'' is unset, -# otherwise ``$mime_forward_decode'' is used instead. -# -# -# set forward_edit=yes -# -# Name: forward_edit -# Type: quadoption -# Default: yes -# -# -# This quadoption controls whether or not the user is automatically -# placed in the editor when forwarding messages. For those who always want -# to forward with no modification, use a setting of ``no''. -# -# -# set forward_format="[%a: %s]" -# -# Name: forward_format -# Type: string -# Default: "[%a: %s]" -# -# -# This variable controls the default subject when forwarding a message. -# It uses the same format sequences as the ``$index_format'' variable. -# -# -# set forward_quote=no -# -# Name: forward_quote -# Type: boolean -# Default: no -# -# -# When set forwarded messages included in the main body of the -# message (when ``$mime_forward'' is unset) will be quoted using -# ``$indent_string''. -# -# -# set from="" -# -# Name: from -# Type: e-mail address -# Default: "" -# -# -# When set, this variable contains a default from address. It -# can be overridden using my_hdr (including from send-hooks) and -# ``$reverse_name''. This variable is ignored if ``$use_from'' -# is unset. -# -# Defaults to the contents of the environment variable EMAIL. -# -set from='martin f krafft ' -# -# set gecos_mask="^[^,]*" -# -# Name: gecos_mask -# Type: regular expression -# Default: "^[^,]*" -# -# -# A regular expression used by mutt to parse the GECOS field of a password -# entry when expanding the alias. By default the regular expression is set -# to "^[^,]*" which will return the string up to the first "," encountered. -# If the GECOS field contains a string like "lastname, firstname" then you -# should set the gecos_mask=".*". -# -# This can be useful if you see the following behavior: you address a e-mail -# to user ID stevef whose full name is Steve Franklin. If mutt expands -# stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to -# a regular expression that will match the whole name so mutt will expand -# "Franklin" to "Franklin, Steve". -# -# -# set hdrs=yes -# -# Name: hdrs -# Type: boolean -# Default: yes -# -# -# When unset, the header fields normally added by the ``my_hdr'' -# command are not created. This variable must be unset before -# composing a new message or replying in order to take effect. If set, -# the user defined header fields are added to every new message. -# -# -# set header=no -# -# Name: header -# Type: boolean -# Default: no -# -# -# When set, this variable causes Mutt to include the header -# of the message you are replying to into the edit buffer. -# The ``$weed'' setting applies. -# -# -# set help=yes -# -# Name: help -# Type: boolean -# Default: yes -# -# -# When set, help lines describing the bindings for the major functions -# provided by each menu are displayed on the first line of the screen. -# -# Note: The binding will not be displayed correctly if the -# function is bound to a sequence rather than a single keystroke. Also, -# the help line may not be updated if a binding is changed while Mutt is -# running. Since this variable is primarily aimed at new users, neither -# of these should present a major problem. -# -# -# set hidden_host=no -# -# Name: hidden_host -# Type: boolean -# Default: no -# -# -# When set, mutt will skip the host name part of ``$hostname'' variable -# when adding the domain part to addresses. This variable does not -# affect the generation of Message-IDs, and it will not lead to the -# cut-off of first-level domains. -# -# -# set hide_limited=no -# -# Name: hide_limited -# Type: boolean -# Default: no -# -# -# When set, mutt will not show the presence of messages that are hidden -# by limiting, in the thread tree. -# -# -# set hide_missing=yes -# -# Name: hide_missing -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the presence of missing messages in the -# thread tree. -# -# -# set hide_thread_subject=yes -# -# Name: hide_thread_subject -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the subject of messages in the thread -# tree that have the same subject as their parent or closest previously -# displayed sibling. -# -# -# set hide_top_limited=no -# -# Name: hide_top_limited -# Type: boolean -# Default: no -# -# -# When set, mutt will not show the presence of messages that are hidden -# by limiting, at the top of threads in the thread tree. Note that when -# $hide_limited is set, this option will have no effect. -# -# -# set hide_top_missing=yes -# -# Name: hide_top_missing -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the presence of missing messages at the -# top of threads in the thread tree. Note that when $hide_missing is -# set, this option will have no effect. -# -# -# set history=10 -# -# Name: history -# Type: number -# Default: 10 -# -# -# This variable controls the size (in number of strings remembered) of -# the string history buffer. The buffer is cleared each time the -# variable is set. -# -# -# set history_file="~/.mutthistory" -# -# Name: history_file -# Type: path -# Default: "~/.mutthistory" -# -# -# The file in which Mutt will save its history. -# -set history_file="~/.var/mutt/history" -# -# set honor_followup_to=yes -# -# Name: honor_followup_to -# Type: quadoption -# Default: yes -# -# -# This variable controls whether or not a Mail-Followup-To header is -# honored when group-replying to a message. -# -# -# set hostname="" -# -# Name: hostname -# Type: string -# Default: "" -# -# -# Specifies the hostname to use after the ``@'' in local e-mail -# addresses. This overrides the compile time definition obtained from -# /etc/resolv.conf. -# -# Note: On Debian systems, the default for this variable is obtained -# from /etc/mailname when Mutt starts. -# -# -# set ignore_linear_white_space=no -# -# Name: ignore_linear_white_space -# Type: boolean -# Default: no -# -# -# This option replaces linear-white-space between encoded-word -# and *text to a single space to prevent the display of MIME-encoded -# ``Subject'' field from being divided into multiple lines. -# -# -# set ignore_list_reply_to=no -# -# Name: ignore_list_reply_to -# Type: boolean -# Default: no -# -# -# Affects the behaviour of the reply function when replying to -# messages from mailing lists. When set, if the ``Reply-To:'' field is -# set to the same value as the ``To:'' field, Mutt assumes that the -# ``Reply-To:'' field was set by the mailing list to automate responses -# to the list, and will ignore this field. To direct a response to the -# mailing list when this option is set, use the list-reply -# function; group-reply will reply to both the sender and the -# list. -# -set ignore_list_reply_to=yes -# -# set imap_authenticators="" -# -# Name: imap_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an IMAP server, in the order mutt should -# try them. Authentication methods are either 'login' or the right -# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' -# or 'cram-md5'. This parameter is case-insensitive. If this -# parameter is unset (the default) mutt will try all available methods, -# in order from most-secure to least-secure. -# -# Example: set imap_authenticators="gssapi:cram-md5:login" -# -# Note: Mutt will only fall back to other authentication methods if -# the previous methods are unavailable. If a method is available but -# authentication fails, mutt will not connect to the IMAP server. -# -# -# set imap_check_subscribed=no -# -# Name: imap_check_subscribed -# Type: boolean -# Default: no -# -# -# When set, mutt will fetch the set of subscribed folders from -# your server on connection, and add them to the set of mailboxes -# it polls for new mail. See also the ``mailboxes'' command. -# -# -# set imap_delim_chars="/." -# -# Name: imap_delim_chars -# Type: string -# Default: "/." -# -# -# This contains the list of characters which you would like to treat -# as folder separators for displaying IMAP paths. In particular it -# helps in using the '=' shortcut for your folder variable. -# -# -# set imap_headers="" -# -# Name: imap_headers -# Type: string -# Default: "" -# -# -# Mutt requests these header fields in addition to the default headers -# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE -# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP -# servers before displaying the index menu. You may want to add more -# headers for spam detection. Note: This is a space separated list. -# -# -# set imap_idle=no -# -# Name: imap_idle -# Type: boolean -# Default: no -# -# -# When set, mutt will attempt to use the IMAP IDLE extension -# to check for new mail in the current mailbox. Some servers -# (dovecot was the inspiration for this option) react badly -# to mutt's implementation. If your connection seems to freeze -# up periodically, try unsetting this. -# -# -# set imap_keepalive=900 -# -# Name: imap_keepalive -# Type: number -# Default: 900 -# -# -# This variable specifies the maximum amount of time in seconds that mutt -# will wait before polling open IMAP connections, to prevent the server -# from closing them before mutt has finished with them. The default is -# well within the RFC-specified minimum amount of time (30 minutes) before -# a server is allowed to do this, but in practice the RFC does get -# violated every now and then. Reduce this number if you find yourself -# getting disconnected from your IMAP server due to inactivity. -# -# -# set imap_list_subscribed=no -# -# Name: imap_list_subscribed -# Type: boolean -# Default: no -# -# -# This variable configures whether IMAP folder browsing will look for -# only subscribed folders or all folders. This can be toggled in the -# IMAP browser with the toggle-subscribed function. -# -# -# set imap_login="" -# -# Name: imap_login -# Type: string -# Default: "" -# -# -# Your login name on the IMAP server. -# -# This variable defaults to the value of imap_user. -# -# -# set imap_pass="" -# -# Name: imap_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your IMAP account. If unset, Mutt will -# prompt you for your password when you invoke the fetch-mail function. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc even -# if you are the only one who can read the file. -# -# -# set imap_passive=yes -# -# Name: imap_passive -# Type: boolean -# Default: yes -# -# -# When set, mutt will not open new IMAP connections to check for new -# mail. Mutt will only check for new mail over existing IMAP -# connections. This is useful if you don't want to be prompted to -# user/password pairs on mutt invocation, or if opening the connection -# is slow. -# -# -# set imap_peek=yes -# -# Name: imap_peek -# Type: boolean -# Default: yes -# -# -# When set, mutt will avoid implicitly marking your mail as read whenever -# you fetch a message from the server. This is generally a good thing, -# but can make closing an IMAP folder somewhat slower. This option -# exists to appease speed freaks. -# -# -# set imap_servernoise=yes -# -# Name: imap_servernoise -# Type: boolean -# Default: yes -# -# -# When set, mutt will display warning messages from the IMAP -# server as error messages. Since these messages are often -# harmless, or generated due to configuration problems on the -# server which are out of the users' hands, you may wish to suppress -# them at some point. -# -# -# set imap_user="" -# -# Name: imap_user -# Type: string -# Default: "" -# -# -# The name of the user whose mail you intend to access on the IMAP -# server. -# -# This variable defaults to your user name on the local machine. -# -# -# set implicit_autoview=no -# -# Name: implicit_autoview -# Type: boolean -# Default: no -# -# -# If set to ``yes'', mutt will look for a mailcap entry with the -# copiousoutput flag set for every MIME attachment it doesn't have -# an internal viewer defined for. If such an entry is found, mutt will -# use the viewer defined in that entry to convert the body part to text -# form. -# -set implicit_autoview=yes -# -# set include=ask-yes -# -# Name: include -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not a copy of the message(s) you are replying to -# is included in your reply. -# -set include=yes -# -# set include_onlyfirst=no -# -# Name: include_onlyfirst -# Type: boolean -# Default: no -# -# -# Controls whether or not Mutt includes only the first attachment -# of the message you are replying. -# -# -# set indent_string="> " -# -# Name: indent_string -# Type: string -# Default: "> " -# -# -# Specifies the string to prepend to each line of text quoted in a -# message to which you are replying. You are strongly encouraged not to -# change this value, as it tends to agitate the more fanatical netizens. -# -# -# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" -# -# Name: index_format -# Type: string -# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" -# -# -# This variable allows you to customize the message index display to -# your personal taste. -# -# ``Format strings'' are similar to the strings used in the ``C'' -# function printf to format output (see the man page for more detail). -# The following sequences are defined in Mutt: -# -# %a address of the author -# %A reply-to address (if present; otherwise: address of author) -# %b filename of the original message folder (think mailBox) -# %B the list to which the letter was sent, or else the folder name (%b). -# %c number of characters (bytes) in the message -# %C current message number -# %d date and time of the message in the format specified by -# ``date_format'' converted to sender's time zone -# %D date and time of the message in the format specified by -# ``date_format'' converted to the local time zone -# %e current message number in thread -# %E number of messages in current thread -# %f entire From: line (address + real name) -# %F author name, or recipient name if the message is from you -# %H spam attribute(s) of this message -# %i message-id of the current message -# %l number of lines in the message (does not work with maildir, -# mh, and possibly IMAP folders) -# %L If an address in the To or CC header field matches an address -# defined by the users ``subscribe'' command, this displays -# "To ", otherwise the same as %F. -# %m total number of message in the mailbox -# %M number of hidden messages if the thread is collapsed. -# %N message score -# %n author's real name (or address if missing) -# %O (_O_riginal save folder) Where mutt would formerly have -# stashed the message: list name or recipient name if no list -# %P progress indicator for the builtin pager (how much of the file has been displayed) -# %s subject of the message -# %S status of the message (N/D/d/!/r/*) -# %t `to:' field (recipients) -# %T the appropriate character from the $to_chars string -# %u user (login) name of the author -# %v first name of the author, or the recipient if the message is from you -# %X number of attachments -# (please see the ``attachments'' section for possible speed effects) -# %y `x-label:' field, if present -# %Y `x-label' field, if present, and (1) not at part of a thread tree, -# (2) at the top of a thread, or (3) `x-label' is different from -# preceding message's `x-label'. -# %Z message status flags -# %{fmt} the date and time of the message is converted to sender's -# time zone, and ``fmt'' is expanded by the library function -# ``strftime''; a leading bang disables locales -# %[fmt] the date and time of the message is converted to the local -# time zone, and ``fmt'' is expanded by the library function -# ``strftime''; a leading bang disables locales -# %(fmt) the local date and time when the message was received. -# ``fmt'' is expanded by the library function ``strftime''; -# a leading bang disables locales -# % the current local time. ``fmt'' is expanded by the library -# function ``strftime''; a leading bang disables locales. -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# -# -# See also: ``$to_chars''. -# -set index_format="%4C %Z %{%b %d} %-15.15F (%?l?%4l&%4c?) %?H?[%H] ?%s" -# -# set ispell="ispell" -# -# Name: ispell -# Type: path -# Default: "ispell" -# -# -# How to invoke ispell (GNU's spell-checking software). -# -# -# set keep_flagged=no -# -# Name: keep_flagged -# Type: boolean -# Default: no -# -# -# If set, read messages marked as flagged will not be moved -# from your spool mailbox to your ``$mbox'' mailbox, or as a result of -# a ``mbox-hook'' command. -# -# -# set locale="C" -# -# Name: locale -# Type: string -# Default: "C" -# -# -# The locale used by strftime(3) to format dates. Legal values are -# the strings your system accepts for the locale variable LC_TIME. -# -# -# set mail_check=5 -# -# Name: mail_check -# Type: number -# Default: 5 -# -# -# This variable configures how often (in seconds) mutt should look for -# new mail. -# -# -# set mailcap_path="" -# -# Name: mailcap_path -# Type: string -# Default: "" -# -# -# This variable specifies which files to consult when attempting to -# display MIME bodies not directly supported by Mutt. -# -# -# set mailcap_sanitize=yes -# -# Name: mailcap_sanitize -# Type: boolean -# Default: yes -# -# -# If set, mutt will restrict possible characters in mailcap % expandos -# to a well-defined set of safe characters. This is the safe setting, -# but we are not sure it doesn't break some more advanced MIME stuff. -# -# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE -# DOING! -# -# -# set maildir_mtime=no -# -# Name: maildir_mtime -# Type: boolean -# Default: no -# -# -# If set, the sort-by-date option in the browser will sort maildirs -# smartly, not using the mtime of the maildir itself but that of the -# newest message in the new subdirectory, making the sorting by -# reverse date much more useful. People with maildirs over NFS may -# wish to leave this option unset. -# -set maildir_mtime=yes -# -# set header_cache="" -# -# Name: header_cache -# Type: path -# Default: "" -# -# -# The header_cache variable points to the header cache database. -# If header_cache points to a directory it will contain a header cache -# database per folder. If header_cache points to a file that file will -# be a single global header cache. By default it is unset so no header -# caching will be used. -# -set header_cache="~/.var/mutt/header_cache" -# -# set maildir_header_cache_verify=yes -# -# Name: maildir_header_cache_verify -# Type: boolean -# Default: yes -# -# -# Check for Maildir unaware programs other than mutt having modified maildir -# files when the header cache is in use. This incurs one stat(2) per -# message every time the folder is opened. -# -set maildir_header_cache_verify=no -# -# set header_cache_pagesize="16384" -# -# Name: header_cache_pagesize -# Type: string -# Default: "16384" -# -# -# When mutt is compiled with either gdbm or bdb4 as the header cache backend, -# this option changes the database page size. Too large or too small -# values can waste space, memory, or CPU time. The default should be more -# or less optimal for most use cases. -# -set header_cache_pagesize=32768 -# -# set maildir_trash=no -# -# Name: maildir_trash -# Type: boolean -# Default: no -# -# -# If set, messages marked as deleted will be saved with the maildir -# (T)rashed flag instead of unlinked. NOTE: this only applies -# to maildir-style mailboxes. Setting it will have no effect on other -# mailbox types. -# -# -# set mark_old=yes -# -# Name: mark_old -# Type: boolean -# Default: yes -# -# -# Controls whether or not mutt marks new unread -# messages as old if you exit a mailbox without reading them. -# With this option set, the next time you start mutt, the messages -# will show up with an "O" next to them in the index menu, -# indicating that they are old. -# -set mark_old=yes -# -# set markers=yes -# -# Name: markers -# Type: boolean -# Default: yes -# -# -# Controls the display of wrapped lines in the internal pager. If set, a -# ``+'' marker is displayed at the beginning of wrapped lines. Also see -# the ``$smart_wrap'' variable. -# -set markers=no -# -# set mask="!^\\.[^.]" -# -# Name: mask -# Type: regular expression -# Default: "!^\\.[^.]" -# -# -# A regular expression used in the file browser, optionally preceded by -# the not operator ``!''. Only files whose names match this mask -# will be shown. The match is always case-sensitive. -# -# -# set mbox="~/mbox" -# -# Name: mbox -# Type: path -# Default: "~/mbox" -# -# -# This specifies the folder into which read mail in your ``$spoolfile'' -# folder will be appended. -# -# -# set mbox_type=mbox -# -# Name: mbox_type -# Type: folder magic -# Default: mbox -# -# -# The default mailbox type used when creating new folders. May be any of -# mbox, MMDF, MH and Maildir. -# -set mbox_type=Maildir -# -# set metoo=no -# -# Name: metoo -# Type: boolean -# Default: no -# -# -# If unset, Mutt will remove your address (see the ``alternates'' -# command) from the list of recipients when replying to a message. -# -# -# set menu_context=0 -# -# Name: menu_context -# Type: number -# Default: 0 -# -set menu_context=2 -# -# This variable controls the number of lines of context that are given -# when scrolling through menus. (Similar to ``$pager_context''.) -# -# -# set menu_move_off=yes -# -# Name: menu_move_off -# Type: boolean -# Default: yes -# -# -# When unset, the bottom entry of menus will never scroll up past -# the bottom of the screen, unless there are less entries than lines. -# When set, the bottom entry may move off the bottom. -# -# -# set menu_scroll=no -# -# Name: menu_scroll -# Type: boolean -# Default: no -# -set menu_scroll=yes -# -# When set, menus will be scrolled up or down one line when you -# attempt to move across a screen boundary. If unset, the screen -# is cleared and the next or previous page of the menu is displayed -# (useful for slow links to avoid many redraws). -# -# -# set meta_key=no -# -# Name: meta_key -# Type: boolean -# Default: no -# -# -# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) -# set as if the user had pressed the ESC key and whatever key remains -# after having the high bit removed. For example, if the key pressed -# has an ASCII value of 0xf8, then this is treated as if the user had -# pressed ESC then ``x''. This is because the result of removing the -# high bit from ``0xf8'' is ``0x78'', which is the ASCII character -# ``x''. -# -# -# set mh_purge=no -# -# Name: mh_purge -# Type: boolean -# Default: no -# -# -# When unset, mutt will mimic mh's behaviour and rename deleted messages -# to , in mh folders instead of really deleting -# them. If the variable is set, the message files will simply be -# deleted. -# -# -# set mh_seq_flagged="flagged" -# -# Name: mh_seq_flagged -# Type: string -# Default: "flagged" -# -# -# The name of the MH sequence used for flagged messages. -# -# -# set mh_seq_replied="replied" -# -# Name: mh_seq_replied -# Type: string -# Default: "replied" -# -# -# The name of the MH sequence used to tag replied messages. -# -# -# set mh_seq_unseen="unseen" -# -# Name: mh_seq_unseen -# Type: string -# Default: "unseen" -# -# -# The name of the MH sequence used for unseen messages. -# -# -# set mime_forward=no -# -# Name: mime_forward -# Type: quadoption -# Default: no -# -# -# When set, the message you are forwarding will be attached as a -# separate MIME part instead of included in the main body of the -# message. This is useful for forwarding MIME messages so the receiver -# can properly view the message as it was delivered to you. If you like -# to switch between MIME and not MIME from mail to mail, set this -# variable to ask-no or ask-yes. -# -# Also see ``$forward_decode'' and ``$mime_forward_decode''. -# -set mime_forward=ask-yes -# -# set mime_forward_decode=no -# -# Name: mime_forward_decode -# Type: boolean -# Default: no -# -# -# Controls the decoding of complex MIME messages into text/plain when -# forwarding a message while ``$mime_forward'' is set. Otherwise -# ``$forward_decode'' is used instead. -# -# -# set mime_forward_rest=yes -# -# Name: mime_forward_rest -# Type: quadoption -# Default: yes -# -# -# When forwarding multiple attachments of a MIME message from the recvattach -# menu, attachments which cannot be decoded in a reasonable manner will -# be attached to the newly composed message if this option is set. -# -# -# set pgp_mime_signature_filename="signature.asc" -# -# Name: pgp_mime_signature_filename -# Type: string -# Default: "signature.asc" -# -# -# This option sets the filename used for signature parts in PGP/MIME -# signed messages. -# -set pgp_mime_signature_filename="digital_signature_gpg.asc" -# -# set pgp_mime_signature_description="Digital signature" -# -# Name: pgp_mime_signature_description -# Type: string -# Default: "Digital signature" -# -set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/)" -# -# This option sets the Content-Description used for signature parts in -# PGP/MIME signed messages. -# -# -# set mix_entry_format="%4n %c %-16s %a" -# -# Name: mix_entry_format -# Type: string -# Default: "%4n %c %-16s %a" -# -# -# This variable describes the format of a remailer line on the mixmaster -# chain selection screen. The following printf-like sequences are -# supported: -# -# %n The running number on the menu. -# %c Remailer capabilities. -# %s The remailer's short name. -# %a The remailer's e-mail address. -# -# -# set mixmaster="mixmaster" -# -# Name: mixmaster -# Type: path -# Default: "mixmaster" -# -# -# This variable contains the path to the Mixmaster binary on your -# system. It is used with various sets of parameters to gather the -# list of known remailers, and to finally send a message through the -# mixmaster chain. -# -# Note: On Debian systems, this option is set by default to -# ``mixmaster-filter'' in /etc/Muttrc. -# -# -# set move=ask-no -# -# Name: move -# Type: quadoption -# Default: ask-no -# -# -# Controls whether or not Mutt will move read messages -# from your spool mailbox to your ``$mbox'' mailbox, or as a result of -# a ``mbox-hook'' command. -# -set move=no -# -# set message_cachedir="" -# -# Name: message_cachedir -# Type: path -# Default: "" -# -# -# Set this to a directory and mutt will cache copies of messages from -# your IMAP and POP servers here. You are free to remove entries at any -# time, for instance if stale entries accumulate because you have -# deleted messages with another mail client. -# -# -# set message_cache_clean=no -# -# Name: message_cache_clean -# Type: boolean -# Default: no -# -# -# If set, mutt will clean out obsolete entries from the cache when -# the mailbox is synchronized. You probably only want to set it -# every once in a while, since it can be a little slow. -# -# -# set message_format="%s" -# -# Name: message_format -# Type: string -# Default: "%s" -# -# -# This is the string displayed in the ``attachment'' menu for -# attachments of type message/rfc822. For a full listing of defined -# printf()-like sequences see the section on ``$index_format''. -# -# -# set narrow_tree=no -# -# Name: narrow_tree -# Type: boolean -# Default: no -# -# -# This variable, when set, makes the thread tree narrower, allowing -# deeper threads to fit on the screen. -# -set narrow_tree=yes -# -# set net_inc=10 -# -# Name: net_inc -# Type: number -# Default: 10 -# -# -# Operations that expect to transfer a large amount of data over the -# network will update their progress every net_inc kilobytes. -# If set to 0, no progress messages will be displayed. -# -# See also ``$read_inc'' and ``$write_inc''. -# -# -# set pager="builtin" -# -# Name: pager -# Type: path -# Default: "builtin" -# -# -# This variable specifies which pager you would like to use to view -# messages. builtin means to use the builtin pager, otherwise this -# variable should specify the pathname of the external pager you would -# like to use. -# -# Using an external pager may have some disadvantages: Additional -# keystrokes are necessary because you can't call mutt functions -# directly from the pager, and screen resizes cause lines longer than -# the screen width to be badly formatted in the help menu. -# -# -# set pager_context=0 -# -# Name: pager_context -# Type: number -# Default: 0 -# -# -# This variable controls the number of lines of context that are given -# when displaying the next or previous page in the internal pager. By -# default, Mutt will display the line after the last one on the screen -# at the top of the next page (0 lines of context). -# -set pager_context=2 -# -# set pager_format="-%Z- %C/%m: %-20.20n %s%> -- (%P)" -# -# Name: pager_format -# Type: string -# Default: "-%Z- %C/%m: %-20.20n %s%> -- (%P)" -# -# -# This variable controls the format of the one-line message ``status'' -# displayed before each message in either the internal or an external -# pager. The valid sequences are listed in the ``$index_format'' -# section. -# -# -# set pager_index_lines=0 -# -# Name: pager_index_lines -# Type: number -# Default: 0 -# -# -# Determines the number of lines of a mini-index which is shown when in -# the pager. The current message, unless near the top or bottom of the -# folder, will be roughly one third of the way down this mini-index, -# giving the reader the context of a few messages before and after the -# message. This is useful, for example, to determine how many messages -# remain to be read in the current thread. One of the lines is reserved -# for the status bar from the index, so a pager_index_lines of 6 -# will only show 5 lines of the actual index. A value of 0 results in -# no index being shown. If the number of messages in the current folder -# is less than pager_index_lines, then the index will only use as -# many lines as it needs. -# -set pager_index_lines=5 -# -# set pager_stop=no -# -# Name: pager_stop -# Type: boolean -# Default: no -# -# -# When set, the internal-pager will not move to the next message -# when you are at the end of a message and invoke the next-page -# function. -# -set pager_stop=yes -# -# set crypt_autosign=no -# -# Name: crypt_autosign -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to -# cryptographically sign outgoing messages. This can be overridden -# by use of the pgp-menu, when signing is not required or -# encryption is requested as well. If ``$smime_is_default'' is set, -# then OpenSSL is used instead to create S/MIME messages and settings can -# be overridden by use of the smime-menu. -# (Crypto only) -# -set crypt_autosign=yes -# -# set crypt_autoencrypt=no -# -# Name: crypt_autoencrypt -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to PGP -# encrypt outgoing messages. This is probably only useful in -# connection to the send-hook command. It can be overridden -# by use of the pgp-menu, when encryption is not required or -# signing is requested as well. IF ``$smime_is_default'' is set, -# then OpenSSL is used instead to create S/MIME messages and -# settings can be overridden by use of the smime-menu. -# (Crypto only) -# -# -# set pgp_ignore_subkeys=yes -# -# Name: pgp_ignore_subkeys -# Type: boolean -# Default: yes -# -# -# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, -# the principal key will inherit the subkeys' capabilities. Unset this -# if you want to play interesting key selection games. -# (PGP only) -# -# -# set crypt_replyencrypt=yes -# -# Name: crypt_replyencrypt -# Type: boolean -# Default: yes -# -# -# If set, automatically PGP or OpenSSL encrypt replies to messages which are -# encrypted. -# (Crypto only) -# -# -# set crypt_replysign=no -# -# Name: crypt_replysign -# Type: boolean -# Default: no -# -# -# If set, automatically PGP or OpenSSL sign replies to messages which are -# signed. -# -# Note: this does not work on messages that are encrypted -# and signed! -# (Crypto only) -# -set crypt_replysign=yes -# -# set crypt_replysignencrypted=no -# -# Name: crypt_replysignencrypted -# Type: boolean -# Default: no -# -# -# If set, automatically PGP or OpenSSL sign replies to messages -# which are encrypted. This makes sense in combination with -# ``$crypt_replyencrypt'', because it allows you to sign all -# messages which are automatically encrypted. This works around -# the problem noted in ``$crypt_replysign'', that mutt is not able -# to find out whether an encrypted message is also signed. -# (Crypto only) -# -set crypt_replysignencrypted=yes -# -# set crypt_timestamp=yes -# -# Name: crypt_timestamp -# Type: boolean -# Default: yes -# -# -# If set, mutt will include a time stamp in the lines surrounding -# PGP or S/MIME output, so spoofing such lines is more difficult. -# If you are using colors to mark these lines, and rely on these, -# you may unset this setting. -# (Crypto only) -# -# -# set pgp_use_gpg_agent=no -# -# Name: pgp_use_gpg_agent -# Type: boolean -# Default: no -# -# -# If set, mutt will use a possibly-running gpg-agent process. -# (PGP only) -# -set pgp_use_gpg_agent=yes -# -# set crypt_verify_sig=yes -# -# Name: crypt_verify_sig -# Type: quadoption -# Default: yes -# -# -# If ``yes'', always attempt to verify PGP or S/MIME signatures. -# If ``ask'', ask whether or not to verify the signature. -# If ``no'', never attempt to verify cryptographic signatures. -# (Crypto only) -# -# -# set smime_is_default=no -# -# Name: smime_is_default -# Type: boolean -# Default: no -# -# -# The default behaviour of mutt is to use PGP on all auto-sign/encryption -# operations. To override and to use OpenSSL instead this must be set. -# However, this has no effect while replying, since mutt will automatically -# select the same application that was used to sign/encrypt the original -# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.) -# (S/MIME only) -# -# -# set smime_ask_cert_label=yes -# -# Name: smime_ask_cert_label -# Type: boolean -# Default: yes -# -# -# This flag controls whether you want to be asked to enter a label -# for a certificate about to be added to the database or not. It is -# set by default. -# (S/MIME only) -# -# -# set smime_decrypt_use_default_key=yes -# -# Name: smime_decrypt_use_default_key -# Type: boolean -# Default: yes -# -# -# If set (default) this tells mutt to use the default key for decryption. Otherwise, -# if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address -# to determine the key to use. It will ask you to supply a key, if it can't find one. -# (S/MIME only) -# -# -# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u" -# -# Name: pgp_entry_format -# Type: string -# Default: "%4n %t%f %4l/0x%k %-4a %2c %u" -# -# -# This variable allows you to customize the PGP key selection menu to -# your personal taste. This string is similar to ``$index_format'', but -# has its own set of printf()-like sequences: -# -# %n number -# %k key id -# %u user id -# %a algorithm -# %l key length -# %f flags -# %c capabilities -# %t trust/validity of the key-uid association -# %[] date of the key where is an strftime(3) expression -# -# -# (PGP only) -# -# -# set pgp_good_sign="" -# -# Name: pgp_good_sign -# Type: regular expression -# Default: "" -# -# -# If you assign a text to this variable, then a PGP signature is only -# considered verified if the output from $pgp_verify_command contains -# the text. Use this variable if the exit code from the command is 0 -# even for bad signatures. -# (PGP only) -# -# -# set pgp_check_exit=yes -# -# Name: pgp_check_exit -# Type: boolean -# Default: yes -# -# -# If set, mutt will check the exit code of the PGP subprocess when -# signing or encrypting. A non-zero exit code means that the -# subprocess failed. -# (PGP only) -# -# -# set pgp_long_ids=no -# -# Name: pgp_long_ids -# Type: boolean -# Default: no -# -# -# If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. -# (PGP only) -# -# -# set pgp_retainable_sigs=no -# -# Name: pgp_retainable_sigs -# Type: boolean -# Default: no -# -# -# If set, signed and encrypted messages will consist of nested -# multipart/signed and multipart/encrypted body parts. -# -# This is useful for applications like encrypted and signed mailing -# lists, where the outer layer (multipart/encrypted) can be easily -# removed, while the inner multipart/signed part is retained. -# (PGP only) -# -set pgp_retainable_sigs=yes -# -# set pgp_autoinline=no -# -# Name: pgp_autoinline -# Type: boolean -# Default: no -# -# -# This option controls whether Mutt generates old-style inline -# (traditional) PGP encrypted or signed messages under certain -# circumstances. This can be overridden by use of the pgp-menu, -# when inline is not required. -# -# Note that Mutt might automatically use PGP/MIME for messages -# which consist of more than a single MIME part. Mutt can be -# configured to ask before sending PGP/MIME messages when inline -# (traditional) would not work. -# See also: ``$pgp_mime_auto''. -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_replyinline=no -# -# Name: pgp_replyinline -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to -# create an inline (traditional) message when replying to a -# message which is PGP encrypted/signed inline. This can be -# overridden by use of the pgp-menu, when inline is not -# required. This option does not automatically detect if the -# (replied-to) message is inline; instead it relies on Mutt -# internals for previously checked/flagged messages. -# -# Note that Mutt might automatically use PGP/MIME for messages -# which consist of more than a single MIME part. Mutt can be -# configured to ask before sending PGP/MIME messages when inline -# (traditional) would not work. -# See also: ``$pgp_mime_auto''. -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_show_unusable=yes -# -# Name: pgp_show_unusable -# Type: boolean -# Default: yes -# -# -# If set, mutt will display non-usable keys on the PGP key selection -# menu. This includes keys which have been revoked, have expired, or -# have been marked as ``disabled'' by the user. -# (PGP only) -# -# -# set pgp_sign_as="" -# -# Name: pgp_sign_as -# Type: string -# Default: "" -# -# -# If you have more than one key pair, this option allows you to specify -# which of your private keys to use. It is recommended that you use the -# keyid form to specify your key (e.g., ``0x00112233''). -# (PGP only) -# -set pgp_sign_as="0x330c4a75" -# -# set pgp_strict_enc=yes -# -# Name: pgp_strict_enc -# Type: boolean -# Default: yes -# -# -# If set, Mutt will automatically encode PGP/MIME signed messages as -# quoted-printable. Please note that unsetting this variable may -# lead to problems with non-verifyable PGP signatures, so only change -# this if you know what you are doing. -# (PGP only) -# -# -# set pgp_timeout=300 -# -# Name: pgp_timeout -# Type: number -# Default: 300 -# -# -# The number of seconds after which a cached passphrase will expire if -# not used. -# (PGP only) -# -# -# set pgp_sort_keys=address -# -# Name: pgp_sort_keys -# Type: sort order -# Default: address -# -# -# Specifies how the entries in the `pgp keys' menu are sorted. The -# following are legal values: -# -# address sort alphabetically by user id -# keyid sort alphabetically by key id -# date sort by key creation date -# trust sort by the trust of the key -# -# -# If you prefer reverse order of the above values, prefix it with -# `reverse-'. -# (PGP only) -# -# -# set pgp_mime_auto=ask-yes -# -# Name: pgp_mime_auto -# Type: quadoption -# Default: ask-yes -# -# -# This option controls whether Mutt will prompt you for -# automatically sending a (signed/encrypted) message using -# PGP/MIME when inline (traditional) fails (for any reason). -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_auto_decode=no -# -# Name: pgp_auto_decode -# Type: boolean -# Default: no -# -# -# If set, mutt will automatically attempt to decrypt traditional PGP -# messages whenever the user performs an operation which ordinarily would -# result in the contents of the message being operated on. For example, -# if the user displays a pgp-traditional message which has not been manually -# checked with the check-traditional-pgp function, mutt will automatically -# check the message for traditional pgp. -# -set pgp_auto_decode=yes -# -# set pgp_decode_command="" -# -# Name: pgp_decode_command -# Type: string -# Default: "" -# -# -# This format strings specifies a command which is used to decode -# application/pgp attachments. -# -# The PGP command formats have their own set of printf-like sequences: -# -# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty -# string otherwise. Note: This may be used with a %? construct. -# %f Expands to the name of a file containing a message. -# %s Expands to the name of a file containing the signature part -# of a multipart/signed attachment when verifying it. -# %a The value of $pgp_sign_as. -# %r One or more key IDs. -# -# -# For examples on how to configure these formats for the various versions -# of PGP which are floating around, see the pgp*.rc and gpg.rc files in -# the samples/ subdirectory which has been installed on your system -# alongside the documentation. -# (PGP only) -# -# -# set pgp_getkeys_command="" -# -# Name: pgp_getkeys_command -# Type: string -# Default: "" -# -# -# This command is invoked whenever mutt will need public key information. -# %r is the only printf-like sequence used with this format. -# (PGP only) -# -# -# set pgp_verify_command="" -# -# Name: pgp_verify_command -# Type: string -# Default: "" -# -# -# This command is used to verify PGP signatures. -# (PGP only) -# -# -# set pgp_decrypt_command="" -# -# Name: pgp_decrypt_command -# Type: string -# Default: "" -# -# -# This command is used to decrypt a PGP encrypted message. -# (PGP only) -# -# -# set pgp_clearsign_command="" -# -# Name: pgp_clearsign_command -# Type: string -# Default: "" -# -# -# This format is used to create a old-style "clearsigned" PGP -# message. Note that the use of this format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_sign_command="" -# -# Name: pgp_sign_command -# Type: string -# Default: "" -# -# -# This command is used to create the detached PGP signature for a -# multipart/signed PGP/MIME body part. -# (PGP only) -# -# -# set pgp_encrypt_sign_command="" -# -# Name: pgp_encrypt_sign_command -# Type: string -# Default: "" -# -# -# This command is used to both sign and encrypt a body part. -# (PGP only) -# -# -# set pgp_encrypt_only_command="" -# -# Name: pgp_encrypt_only_command -# Type: string -# Default: "" -# -# -# This command is used to encrypt a body part without signing it. -# (PGP only) -# -# -# set pgp_import_command="" -# -# Name: pgp_import_command -# Type: string -# Default: "" -# -# -# This command is used to import a key from a message into -# the user's public key ring. -# (PGP only) -# -# -# set pgp_export_command="" -# -# Name: pgp_export_command -# Type: string -# Default: "" -# -# -# This command is used to export a public key from the user's -# key ring. -# (PGP only) -# -# -# set pgp_verify_key_command="" -# -# Name: pgp_verify_key_command -# Type: string -# Default: "" -# -# -# This command is used to verify key information from the key selection -# menu. -# (PGP only) -# -# -# set pgp_list_secring_command="" -# -# Name: pgp_list_secring_command -# Type: string -# Default: "" -# -# -# This command is used to list the secret key ring's contents. The -# output format must be analogous to the one used by -# gpg --list-keys --with-colons. -# -# This format is also generated by the pgpring utility which comes -# with mutt. -# (PGP only) -# -# -# set pgp_list_pubring_command="" -# -# Name: pgp_list_pubring_command -# Type: string -# Default: "" -# -# -# This command is used to list the public key ring's contents. The -# output format must be analogous to the one used by -# gpg --list-keys --with-colons. -# -# This format is also generated by the pgpring utility which comes -# with mutt. -# (PGP only) -# -# -# set forward_decrypt=yes -# -# Name: forward_decrypt -# Type: boolean -# Default: yes -# -# -# Controls the handling of encrypted messages when forwarding a message. -# When set, the outer layer of encryption is stripped off. This -# variable is only used if ``$mime_forward'' is set and -# ``$mime_forward_decode'' is unset. -# (PGP only) -# -# -# set smime_timeout=300 -# -# Name: smime_timeout -# Type: number -# Default: 300 -# -# -# The number of seconds after which a cached passphrase will expire if -# not used. -# (S/MIME only) -# -# -# set smime_encrypt_with="" -# -# Name: smime_encrypt_with -# Type: string -# Default: "" -# -# -# This sets the algorithm that should be used for encryption. -# Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128". -# If unset "3des" (TripleDES) is used. -# (S/MIME only) -# -# -# set smime_keys="" -# -# Name: smime_keys -# Type: path -# Default: "" -# -# -# Since there is no pubring/secring as with PGP, mutt has to handle -# storage ad retrieval of keys/certs by itself. This is very basic right now, -# and stores keys and certificates in two different directories, both -# named as the hash-value retrieved from OpenSSL. There is an index file -# which contains mailbox-address keyid pair, and which can be manually -# edited. This one points to the location of the private keys. -# (S/MIME only) -# -# -# set smime_ca_location="" -# -# Name: smime_ca_location -# Type: path -# Default: "" -# -# -# This variable contains the name of either a directory, or a file which -# contains trusted certificates for use with OpenSSL. -# (S/MIME only) -# -# Note: On Debian systems, this defaults to the first existing file in -# the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt -# /etc/ssl/certs/ca-certificates.crt. -# -# -# set smime_certificates="" -# -# Name: smime_certificates -# Type: path -# Default: "" -# -# -# Since there is no pubring/secring as with PGP, mutt has to handle -# storage and retrieval of keys by itself. This is very basic right -# now, and keys and certificates are stored in two different -# directories, both named as the hash-value retrieved from -# OpenSSL. There is an index file which contains mailbox-address -# keyid pairs, and which can be manually edited. This one points to -# the location of the certificates. -# (S/MIME only) -# -# -# set smime_decrypt_command="" -# -# Name: smime_decrypt_command -# Type: string -# Default: "" -# -# -# This format string specifies a command which is used to decrypt -# application/x-pkcs7-mime attachments. -# -# The OpenSSL command formats have their own set of printf-like sequences -# similar to PGP's: -# -# %f Expands to the name of a file containing a message. -# %s Expands to the name of a file containing the signature part -# of a multipart/signed attachment when verifying it. -# %k The key-pair specified with $smime_default_key -# %c One or more certificate IDs. -# %a The algorithm used for encryption. -# %C CA location: Depending on whether $smime_ca_location -# points to a directory or file, this expands to -# "-CApath $smime_ca_location" or "-CAfile $smime_ca_location". -# -# -# For examples on how to configure these formats, see the smime.rc in -# the samples/ subdirectory which has been installed on your system -# alongside the documentation. -# (S/MIME only) -# -# -# set smime_verify_command="" -# -# Name: smime_verify_command -# Type: string -# Default: "" -# -# -# This command is used to verify S/MIME signatures of type multipart/signed. -# (S/MIME only) -# -# -# set smime_verify_opaque_command="" -# -# Name: smime_verify_opaque_command -# Type: string -# Default: "" -# -# -# This command is used to verify S/MIME signatures of type -# application/x-pkcs7-mime. -# (S/MIME only) -# -# -# set smime_sign_command="" -# -# Name: smime_sign_command -# Type: string -# Default: "" -# -# -# This command is used to created S/MIME signatures of type -# multipart/signed, which can be read by all mail clients. -# (S/MIME only) -# -# -# set smime_sign_opaque_command="" -# -# Name: smime_sign_opaque_command -# Type: string -# Default: "" -# -# -# This command is used to created S/MIME signatures of type -# application/x-pkcs7-signature, which can only be handled by mail -# clients supporting the S/MIME extension. -# (S/MIME only) -# -# -# set smime_encrypt_command="" -# -# Name: smime_encrypt_command -# Type: string -# Default: "" -# -# -# This command is used to create encrypted S/MIME messages. -# (S/MIME only) -# -# -# set smime_pk7out_command="" -# -# Name: smime_pk7out_command -# Type: string -# Default: "" -# -# -# This command is used to extract PKCS7 structures of S/MIME signatures, -# in order to extract the public X509 certificate(s). -# (S/MIME only) -# -# -# set smime_get_cert_command="" -# -# Name: smime_get_cert_command -# Type: string -# Default: "" -# -# -# This command is used to extract X509 certificates from a PKCS7 structure. -# (S/MIME only) -# -# -# set smime_get_signer_cert_command="" -# -# Name: smime_get_signer_cert_command -# Type: string -# Default: "" -# -# -# This command is used to extract only the signers X509 certificate from a S/MIME -# signature, so that the certificate's owner may get compared to the -# email's 'From'-field. -# (S/MIME only) -# -# -# set smime_import_cert_command="" -# -# Name: smime_import_cert_command -# Type: string -# Default: "" -# -# -# This command is used to import a certificate via smime_keys. -# (S/MIME only) -# -# -# set smime_get_cert_email_command="" -# -# Name: smime_get_cert_email_command -# Type: string -# Default: "" -# -# -# This command is used to extract the mail address(es) used for storing -# X509 certificates, and for verification purposes (to check whether the -# certificate was issued for the sender's mailbox). -# (S/MIME only) -# -# -# set smime_default_key="" -# -# Name: smime_default_key -# Type: string -# Default: "" -# -# -# This is the default key-pair to use for signing. This must be set to the -# keyid (the hash-value that OpenSSL generates) to work properly -# (S/MIME only) -# -# -# set ssl_force_tls=no -# -# Name: ssl_force_tls -# Type: boolean -# Default: no -# -# -# If this variable is set, Mutt will require that all connections -# to remote servers be encrypted. Furthermore it will attempt to -# negotiate TLS even if the server does not advertise the capability, -# since it would otherwise have to abort the connection anyway. This -# option supersedes ``$ssl_starttls''. -# -# -# set ssl_starttls=yes -# -# Name: ssl_starttls -# Type: quadoption -# Default: yes -# -# -# If set (the default), mutt will attempt to use STARTTLS on servers -# advertising the capability. When unset, mutt will not attempt to -# use STARTTLS regardless of the server's capabilities. -# -# -# set certificate_file="~/.mutt_certificates" -# -# Name: certificate_file -# Type: path -# Default: "~/.mutt_certificates" -# -# -# This variable specifies the file where the certificates you trust -# are saved. When an unknown certificate is encountered, you are asked -# if you accept it or not. If you accept it, the certificate can also -# be saved in this file and further connections are automatically -# accepted. -# -# You can also manually add CA certificates in this file. Any server -# certificate that is signed with one of these CA certificates are -# also automatically accepted. -# -# Example: set certificate_file=~/.mutt/certificates -# -# -# set ssl_use_sslv3=yes -# -# Name: ssl_use_sslv3 -# Type: boolean -# Default: yes -# -# -# This variables specifies whether to attempt to use SSLv3 in the -# SSL authentication process. -# -# -# set ssl_use_tlsv1=yes -# -# Name: ssl_use_tlsv1 -# Type: boolean -# Default: yes -# -# -# This variables specifies whether to attempt to use TLSv1 in the -# SSL authentication process. -# -# -# set ssl_min_dh_prime_bits=0 -# -# Name: ssl_min_dh_prime_bits -# Type: number -# Default: 0 -# -# -# This variable specifies the minimum acceptable prime size (in bits) -# for use in any Diffie-Hellman key exchange. A value of 0 will use -# the default from the GNUTLS library. -# -# -# set ssl_ca_certificates_file="" -# -# Name: ssl_ca_certificates_file -# Type: path -# Default: "" -# -# -# This variable specifies a file containing trusted CA certificates. -# Any server certificate that is signed with one of these CA -# certificates are also automatically accepted. -# -# Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt -# -# Note: On Debian systems, this variable defaults to the example -# mentioned. This file is managed by the ``ca-certificates'' package. -# -# -# set pipe_split=no -# -# Name: pipe_split -# Type: boolean -# Default: no -# -# -# Used in connection with the pipe-message command and the ``tag- -# prefix'' operator. If this variable is unset, when piping a list of -# tagged messages Mutt will concatenate the messages and will pipe them -# as a single folder. When set, Mutt will pipe the messages one by one. -# In both cases the messages are piped in the current sorted order, -# and the ``$pipe_sep'' separator is added after each message. -# -# -# set pipe_decode=no -# -# Name: pipe_decode -# Type: boolean -# Default: no -# -# -# Used in connection with the pipe-message command. When unset, -# Mutt will pipe the messages without any preprocessing. When set, Mutt -# will weed headers and will attempt to PGP/MIME decode the messages -# first. -# -set pipe_decode -# -# set pipe_sep="\n" -# -# Name: pipe_sep -# Type: string -# Default: "\n" -# -# -# The separator to add between messages when piping a list of tagged -# messages to an external Unix command. -# -# -# set pop_authenticators="" -# -# Name: pop_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an POP server, in the order mutt should -# try them. Authentication methods are either 'user', 'apop' or any -# SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'. -# This parameter is case-insensitive. If this parameter is unset -# (the default) mutt will try all available methods, in order from -# most-secure to least-secure. -# -# Example: set pop_authenticators="digest-md5:apop:user" -# -# -# set pop_auth_try_all=yes -# -# Name: pop_auth_try_all -# Type: boolean -# Default: yes -# -# -# If set, Mutt will try all available methods. When unset, Mutt will -# only fall back to other authentication methods if the previous -# methods are unavailable. If a method is available but authentication -# fails, Mutt will not connect to the POP server. -# -# -# set pop_checkinterval=60 -# -# Name: pop_checkinterval -# Type: number -# Default: 60 -# -# -# This variable configures how often (in seconds) mutt should look for -# new mail in the currently selected mailbox if it is a POP mailbox. -# -# -# set pop_delete=ask-no -# -# Name: pop_delete -# Type: quadoption -# Default: ask-no -# -# -# If set, Mutt will delete successfully downloaded messages from the POP -# server when using the fetch-mail function. When unset, Mutt will -# download messages but also leave them on the POP server. -# -# -# set pop_host="" -# -# Name: pop_host -# Type: string -# Default: "" -# -# -# The name of your POP server for the fetch-mail function. You -# can also specify an alternative port, username and password, ie: -# -# [pop[s]://][username[:password]@]popserver[:port] -# -# -# set pop_last=no -# -# Name: pop_last -# Type: boolean -# Default: no -# -# -# If this variable is set, mutt will try to use the "LAST" POP command -# for retrieving only unread messages from the POP server when using -# the fetch-mail function. -# -# -# set pop_reconnect=ask-yes -# -# Name: pop_reconnect -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not Mutt will try to reconnect to POP server if -# the connection is lost. -# -# -# set pop_user="" -# -# Name: pop_user -# Type: string -# Default: "" -# -# -# Your login name on the POP server. -# -# This variable defaults to your user name on the local machine. -# -# -# set pop_pass="" -# -# Name: pop_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your POP account. If unset, Mutt will -# prompt you for your password when you open POP mailbox. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc -# even if you are the only one who can read the file. -# -# -# set post_indent_string="" -# -# Name: post_indent_string -# Type: string -# Default: "" -# -# -# Similar to the ``$attribution'' variable, Mutt will append this -# string after the inclusion of a message which is being replied to. -# -# -# set postpone=ask-yes -# -# Name: postpone -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not messages are saved in the ``$postponed'' -# mailbox when you elect not to send immediately. -# -# -# set postponed="~/postponed" -# -# Name: postponed -# Type: path -# Default: "~/postponed" -# -# -# Mutt allows you to indefinitely ``postpone sending a message'' which -# you are editing. When you choose to postpone a message, Mutt saves it -# in the mailbox specified by this variable. Also see the ``$postpone'' -# variable. -# -set postponed="=drafts" -# -# set preconnect="" -# -# Name: preconnect -# Type: string -# Default: "" -# -# -# If set, a shell command to be executed if mutt fails to establish -# a connection to the server. This is useful for setting up secure -# connections, e.g. with ssh(1). If the command returns a nonzero -# status, mutt gives up opening the server. Example: -# -# preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net -# sleep 20 < /dev/null > /dev/null" -# -# Mailbox 'foo' on mailhost.net can now be reached -# as '{localhost:1234}foo'. -# -# NOTE: For this example to work, you must be able to log in to the -# remote machine without having to enter a password. -# -# -# set print=ask-no -# -# Name: print -# Type: quadoption -# Default: ask-no -# -# -# Controls whether or not Mutt really prints messages. -# This is set to ask-no by default, because some people -# accidentally hit ``p'' often (like me). -# -# -# set print_command="lpr" -# -# Name: print_command -# Type: path -# Default: "lpr" -# -# -# This specifies the command pipe that should be used to print messages. -# -set print_command="muttprint" -# -# set print_decode=yes -# -# Name: print_decode -# Type: boolean -# Default: yes -# -# -# Used in connection with the print-message command. If this -# option is set, the message is decoded before it is passed to the -# external command specified by $print_command. If this option -# is unset, no processing will be applied to the message when -# printing it. The latter setting may be useful if you are using -# some advanced printer filter which is able to properly format -# e-mail messages for printing. -# -# -# set print_split=no -# -# Name: print_split -# Type: boolean -# Default: no -# -# -# Used in connection with the print-message command. If this option -# is set, the command specified by $print_command is executed once for -# each message which is to be printed. If this option is unset, -# the command specified by $print_command is executed only once, and -# all the messages are concatenated, with a form feed as the message -# separator. -# -# Those who use the enscript(1) program's mail-printing mode will -# most likely want to set this option. -# -set print_split=yes -# -# set prompt_after=yes -# -# Name: prompt_after -# Type: boolean -# Default: yes -# -# -# If you use an external ``$pager'', setting this variable will -# cause Mutt to prompt you for a command when the pager exits rather -# than returning to the index menu. If unset, Mutt will return to the -# index menu when the external pager exits. -# -# -# set query_command="" -# -# Name: query_command -# Type: path -# Default: "" -# -# -# This specifies the command that mutt will use to make external address -# queries. The string should contain a %s, which will be substituted -# with the query string the user types. See ``query'' for more -# information. -# -set query_command="lbdbq" -# -# set quit=yes -# -# Name: quit -# Type: quadoption -# Default: yes -# -# -# This variable controls whether ``quit'' and ``exit'' actually quit -# from mutt. If it set to yes, they do quit, if it is set to no, they -# have no effect, and if it is set to ask-yes or ask-no, you are -# prompted for confirmation when you try to quit. -# -# -# set quote_regexp="^([ \t]*[|>:}#])+" -# -# Name: quote_regexp -# Type: regular expression -# Default: "^([ \t]*[|>:}#])+" -# -# -# A regular expression used in the internal-pager to determine quoted -# sections of text in the body of a message. -# -# Note: In order to use the quotedx patterns in the -# internal pager, you need to set this to a regular expression that -# matches exactly the quote characters at the beginning of quoted -# lines. -# -# -# set read_inc=10 -# -# Name: read_inc -# Type: number -# Default: 10 -# -# -# If set to a value greater than 0, Mutt will display which message it -# is currently on when reading a mailbox or when performing search actions -# such as search and limit. The message is printed after -# read_inc messages have been read or searched (e.g., if set to 25, Mutt will -# print a message when it is at message 25, and then again when it gets -# to message 50). This variable is meant to indicate progress when -# reading or searching large mailboxes which may take some time. -# When set to 0, only a single message will appear before the reading -# the mailbox. -# -# Also see the ``$write_inc'' variable and the ``Tuning'' section of the -# manual for performance considerations. -# -# -# set read_only=no -# -# Name: read_only -# Type: boolean -# Default: no -# -# -# If set, all folders are opened in read-only mode. -# -# -# set realname="" -# -# Name: realname -# Type: string -# Default: "" -# -# -# This variable specifies what "real" or "personal" name should be used -# when sending messages. -# -# By default, this is the GECOS field from /etc/passwd. Note that this -# variable will not be used when the user has set a real name -# in the $from variable. -# -# -# set recall=ask-yes -# -# Name: recall -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not Mutt recalls postponed messages -# when composing a new message. Also see ``$postponed''. -# -# Setting this variable to ``yes'' is not generally useful, and thus not -# recommended. -# -set recall=no -# -# set record="~/sent" -# -# Name: record -# Type: path -# Default: "~/sent" -# -# -# This specifies the file into which your outgoing messages should be -# appended. (This is meant as the primary method for saving a copy of -# your messages, but another way to do this is using the ``my_hdr'' -# command to create a Bcc: field with your email address in it.) -# -# The value of $record is overridden by the ``$force_name'' and -# ``$save_name'' variables, and the ``fcc-hook'' command. -# -#set record="=outgoing" -set record="=store" -# -# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*" -# -# Name: reply_regexp -# Type: regular expression -# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*" -# -# -# A regular expression used to recognize reply messages when threading -# and replying. The default value corresponds to the English "Re:" and -# the German "Aw:". -# -set reply_regexp="^((re([[(]?[[:digit:]]+[)]]?)?|aw|antwort|wg|sgkb):[[:space:]]*)+" -# -# set reply_self=no -# -# Name: reply_self -# Type: boolean -# Default: no -# -# -# If unset and you are replying to a message sent by you, Mutt will -# assume that you want to reply to the recipients of that message rather -# than to yourself. -# -# -# set reply_to=ask-yes -# -# Name: reply_to -# Type: quadoption -# Default: ask-yes -# -# -# If set, when replying to a message, Mutt will use the address listed -# in the Reply-to: header as the recipient of the reply. If unset, -# it will use the address in the From: header field instead. This -# option is useful for reading a mailing list that sets the Reply-To: -# header field to the list address and you want to send a private -# message to the author of a message. -# -# -# set resolve=yes -# -# Name: resolve -# Type: boolean -# Default: yes -# -# -# When set, the cursor will be automatically advanced to the next -# (possibly undeleted) message whenever a command that modifies the -# current message is executed. -# -# -# set reverse_alias=no -# -# Name: reverse_alias -# Type: boolean -# Default: no -# -# -# This variable controls whether or not Mutt will display the "personal" -# name from your aliases in the index menu if it finds an alias that -# matches the message's sender. For example, if you have the following -# alias: -# -# alias juser abd30425@somewhere.net (Joe User) -# -# and then you receive mail which contains the following header: -# -# From: abd30425@somewhere.net -# -# It would be displayed in the index menu as ``Joe User'' instead of -# ``abd30425@somewhere.net.'' This is useful when the person's e-mail -# address is not human friendly (like CompuServe addresses). -# -# -# set reverse_name=no -# -# Name: reverse_name -# Type: boolean -# Default: no -# -# -# It may sometimes arrive that you receive mail to a certain machine, -# move the messages to another machine, and reply to some the messages -# from there. If this variable is set, the default From: line of -# the reply messages is built using the address where you received the -# messages you are replying to if that address matches your -# alternates. If the variable is unset, or the address that would be -# used doesn't match your alternates, the From: line will use -# your address on the current machine. -# -set reverse_name=yes -# -# set reverse_realname=yes -# -# Name: reverse_realname -# Type: boolean -# Default: yes -# -# -# This variable fine-tunes the behaviour of the reverse_name feature. -# When it is set, mutt will use the address from incoming messages as-is, -# possibly including eventual real names. When it is unset, mutt will -# override any such real names with the setting of the realname variable. -# -# -# set rfc2047_parameters=no -# -# Name: rfc2047_parameters -# Type: boolean -# Default: no -# -# -# When this variable is set, Mutt will decode RFC-2047-encoded MIME -# parameters. You want to set this variable when mutt suggests you -# to save attachments to files named like this: -# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= -# -# When this variable is set interactively, the change doesn't have -# the desired effect before you have changed folders. -# -# Note that this use of RFC 2047's encoding is explicitly, -# prohibited by the standard, but nevertheless encountered in the -# wild. -# Also note that setting this parameter will not have the effect -# that mutt generates this kind of encoding. Instead, mutt will -# unconditionally use the encoding specified in RFC 2231. -# -set rfc2047_parameters=yes -# -# set save_address=no -# -# Name: save_address -# Type: boolean -# Default: no -# -# -# If set, mutt will take the sender's full address when choosing a -# default folder for saving a mail. If ``$save_name'' or ``$force_name'' -# is set too, the selection of the fcc folder will be changed as well. -# -# -# set save_empty=yes -# -# Name: save_empty -# Type: boolean -# Default: yes -# -# -# When unset, mailboxes which contain no saved messages will be removed -# when closed (the exception is ``$spoolfile'' which is never removed). -# If set, mailboxes are never removed. -# -# Note: This only applies to mbox and MMDF folders, Mutt does not -# delete MH and Maildir directories. -# -# -# set save_history=0 -# -# Name: save_history -# Type: number -# Default: 0 -# -# -# This variable controls the size of the history saved in the -# ``$history_file'' file. -# -set save_history=100 -# -# set save_name=no -# -# Name: save_name -# Type: boolean -# Default: no -# -# -# This variable controls how copies of outgoing messages are saved. -# When set, a check is made to see if a mailbox specified by the -# recipient address exists (this is done by searching for a mailbox in -# the ``$folder'' directory with the username part of the -# recipient address). If the mailbox exists, the outgoing message will -# be saved to that mailbox, otherwise the message is saved to the -# ``$record'' mailbox. -# -# Also see the ``$force_name'' variable. -# -# -# set score=yes -# -# Name: score -# Type: boolean -# Default: yes -# -# -# When this variable is unset, scoring is turned off. This can -# be useful to selectively disable scoring for certain folders when the -# ``$score_threshold_delete'' variable and friends are used. -# -# -# set score_threshold_delete=-1 -# -# Name: score_threshold_delete -# Type: number -# Default: -1 -# -# -# Messages which have been assigned a score equal to or lower than the value -# of this variable are automatically marked for deletion by mutt. Since -# mutt scores are always greater than or equal to zero, the default setting -# of this variable will never mark a message for deletion. -# -# -# set score_threshold_flag=9999 -# -# Name: score_threshold_flag -# Type: number -# Default: 9999 -# -# -# Messages which have been assigned a score greater than or equal to this -# variable's value are automatically marked "flagged". -# -# -# set score_threshold_read=-1 -# -# Name: score_threshold_read -# Type: number -# Default: -1 -# -# -# Messages which have been assigned a score equal to or lower than the value -# of this variable are automatically marked as read by mutt. Since -# mutt scores are always greater than or equal to zero, the default setting -# of this variable will never mark a message read. -# -# -# set send_charset="us-ascii:iso-8859-1:utf-8" -# -# Name: send_charset -# Type: string -# Default: "us-ascii:iso-8859-1:utf-8" -# -# -# A list of character sets for outgoing messages. Mutt will use the -# first character set into which the text can be converted exactly. -# If your ``$charset'' is not iso-8859-1 and recipients may not -# understand UTF-8, it is advisable to include in the list an -# appropriate widely used standard character set (such as -# iso-8859-2, koi8-r or iso-2022-jp) either instead of or after -# "iso-8859-1". -# -# -# set sendmail="/usr/sbin/sendmail -oem -oi" -# -# Name: sendmail -# Type: path -# Default: "/usr/sbin/sendmail -oem -oi" -# -# -# Specifies the program and arguments used to deliver mail sent by Mutt. -# Mutt expects that the specified program interprets additional -# arguments as recipient addresses. -# -#set sendmail="/bin/true" -#set sendmail="~/.mutt/sendmail" -# -# set sendmail_wait=0 -# -# Name: sendmail_wait -# Type: number -# Default: 0 -# -# -# Specifies the number of seconds to wait for the ``$sendmail'' process -# to finish before giving up and putting delivery in the background. -# -# Mutt interprets the value of this variable as follows: -# >0 number of seconds to wait for sendmail to finish before continuing -# 0 wait forever for sendmail to finish -# <0 always put sendmail in the background without waiting -# -# -# Note that if you specify a value other than 0, the output of the child -# process will be put in a temporary file. If there is some error, you -# will be informed as to where to find the output. -# -# -# set shell="" -# -# Name: shell -# Type: path -# Default: "" -# -# -# Command to use when spawning a subshell. By default, the user's login -# shell from /etc/passwd is used. -# -# -# set sig_dashes=yes -# -# Name: sig_dashes -# Type: boolean -# Default: yes -# -# -# If set, a line containing ``-- '' will be inserted before your -# ``$signature''. It is strongly recommended that you not unset -# this variable unless your ``signature'' contains just your name. The -# reason for this is because many software packages use ``-- \n'' to -# detect your signature. For example, Mutt has the ability to highlight -# the signature in a different color in the builtin pager. -# -set sig_dashes=no -# -# set sig_on_top=no -# -# Name: sig_on_top -# Type: boolean -# Default: no -# -# -# If set, the signature will be included before any quoted or forwarded -# text. It is strongly recommended that you do not set this variable -# unless you really know what you are doing, and are prepared to take -# some heat from netiquette guardians. -# -# -# set signature="~/.signature" -# -# Name: signature -# Type: path -# Default: "~/.signature" -# -# -# Specifies the filename of your signature, which is appended to all -# outgoing messages. If the filename ends with a pipe (``|''), it is -# assumed that filename is a shell command and input should be read from -# its stdout. -# -#set signature="~/.mutt/getsignature|" -# -# set simple_search="~f %s | ~s %s" -# -# Name: simple_search -# Type: string -# Default: "~f %s | ~s %s" -# -# -# Specifies how Mutt should expand a simple search into a real search -# pattern. A simple search is one that does not contain any of the ~ -# operators. See ``patterns'' for more information on search patterns. -# -# For example, if you simply type joe at a search or limit prompt, Mutt -# will automatically expand it to the value specified by this variable. -# For the default value it would be: -# -# ~f joe | ~s joe -# -# -# set smart_wrap=yes -# -# Name: smart_wrap -# Type: boolean -# Default: yes -# -# -# Controls the display of lines longer than the screen width in the -# internal pager. If set, long lines are wrapped at a word boundary. If -# unset, lines are simply wrapped at the screen edge. Also see the -# ``$markers'' variable. -# -# -# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])" -# -# Name: smileys -# Type: regular expression -# Default: "(>From )|(:[-^]?[][)(><}{|/DP])" -# -# -# The pager uses this variable to catch some common false -# positives of ``$quote_regexp'', most notably smileys in the beginning -# of a line -# -# -# set sleep_time=1 -# -# Name: sleep_time -# Type: number -# Default: 1 -# -# -# Specifies time, in seconds, to pause while displaying certain informational -# messages, while moving from folder to folder and after expunging -# messages from the current folder. The default is to pause one second, so -# a value of zero for this option suppresses the pause. -# -# -# set smtp_authenticators="" -# -# Name: smtp_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an SMTP server, in the order mutt should -# try them. Authentication methods are any SASL mechanism, eg -# ``digest-md5'', ``gssapi'' or ``cram-md5''. -# This parameter is case-insensitive. If this parameter is unset -# (the default) mutt will try all available methods, in order from -# most-secure to least-secure. -# -# Example: set smtp_authenticators="digest-md5:cram-md5" -# -# -# set smtp_pass="" -# -# Name: smtp_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your SMTP account. If unset, Mutt will -# prompt you for your password when you first send mail via SMTP. -# See ``smtp_url'' to configure mutt to send mail via SMTP. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc even -# if you are the only one who can read the file. -# -# -# set smtp_url="" -# -# Name: smtp_url -# Type: string -# Default: "" -# -# -# Defines the SMTP ``smart'' host where sent messages should relayed for -# delivery. This should take the form of an SMTP URL, eg: -# -# smtp[s]://[user[:pass]@]host[:port]/ -# -# Setting this variable overrides the value of the ``$sendmail'' -# variable. -# -# -# set sort=date -# -# Name: sort -# Type: sort order -# Default: date -# -# -# Specifies how to sort messages in the index menu. Valid values -# are: -# -# date or date-sent -# date-received -# from -# mailbox-order (unsorted) -# score -# size -# spam -# subject -# threads -# to -# -# You may optionally use the reverse- prefix to specify reverse sorting -# order (example: set sort=reverse-date-sent). -# -# Note: On Debian systems, this option is set by default to -# ``threads'' in /etc/Muttrc. -# -# -# set sort_alias=alias -# -# Name: sort_alias -# Type: sort order -# Default: alias -# -# -# Specifies how the entries in the `alias' menu are sorted. The -# following are legal values: -# -# address (sort alphabetically by email address) -# alias (sort alphabetically by alias name) -# unsorted (leave in order specified in .muttrc) -# -# -# set sort_aux=date -# -# Name: sort_aux -# Type: sort order -# Default: date -# -# -# When sorting by threads, this variable controls how threads are sorted -# in relation to other threads, and how the branches of the thread trees -# are sorted. This can be set to any value that ``$sort'' can, except -# threads (in that case, mutt will just use date-sent). You can also -# specify the last- prefix in addition to the reverse- prefix, but last- -# must come after reverse-. The last- prefix causes messages to be -# sorted against its siblings by which has the last descendant, using -# the rest of sort_aux as an ordering. For instance, set sort_aux=last- -# date-received would mean that if a new message is received in a -# thread, that thread becomes the last one displayed (or the first, if -# you have set sort=reverse-threads.) Note: For reversed ``$sort'' -# order $sort_aux is reversed again (which is not the right thing to do, -# but kept to not break any existing configuration setting). -# -set sort_aux=last-date-received -# -# set sort_browser=alpha -# -# Name: sort_browser -# Type: sort order -# Default: alpha -# -# -# Specifies how to sort entries in the file browser. By default, the -# entries are sorted alphabetically. Valid values: -# -# alpha (alphabetically) -# date -# size -# unsorted -# -# You may optionally use the reverse- prefix to specify reverse sorting -# order (example: set sort_browser=reverse-date). -# -# -# set sort_re=yes -# -# Name: sort_re -# Type: boolean -# Default: yes -# -# -# This variable is only useful when sorting by threads with -# ``$strict_threads'' unset. In that case, it changes the heuristic -# mutt uses to thread messages by subject. With sort_re set, mutt will -# only attach a message as the child of another message by subject if -# the subject of the child message starts with a substring matching the -# setting of ``$reply_regexp''. With sort_re unset, mutt will attach -# the message whether or not this is the case, as long as the -# non-``$reply_regexp'' parts of both messages are identical. -# -# -# set spam_separator="," -# -# Name: spam_separator -# Type: string -# Default: "," -# -# -# ``spam_separator'' controls what happens when multiple spam headers -# are matched: if unset, each successive header will overwrite any -# previous matches value for the spam label. If set, each successive -# match will append to the previous, using ``spam_separator'' as a -# separator. -# -# -# set spoolfile="" -# -# Name: spoolfile -# Type: path -# Default: "" -# -# -# If your spool mailbox is in a non-default place where Mutt cannot find -# it, you can specify its location with this variable. Mutt will -# automatically set this variable to the value of the environment -# variable $MAIL if it is not set. -# -# -# set status_chars="-*%A" -# -# Name: status_chars -# Type: string -# Default: "-*%A" -# -# -# Controls the characters used by the "%r" indicator in -# ``$status_format''. The first character is used when the mailbox is -# unchanged. The second is used when the mailbox has been changed, and -# it needs to be resynchronized. The third is used if the mailbox is in -# read-only mode, or if the mailbox will not be written when exiting -# that mailbox (You can toggle whether to write changes to a mailbox -# with the toggle-write operation, bound by default to "%"). The fourth -# is used to indicate that the current folder has been opened in attach- -# message mode (Certain operations like composing a new mail, replying, -# forwarding, etc. are not permitted in this mode). -# -# -# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" -# -# Name: status_format -# Type: string -# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" -# -# -# Controls the format of the status line displayed in the index -# menu. This string is similar to ``$index_format'', but has its own -# set of printf()-like sequences: -# -# %b number of mailboxes with new mail * -# %d number of deleted messages * -# %f the full pathname of the current mailbox -# %F number of flagged messages * -# %h local hostname -# %l size (in bytes) of the current mailbox * -# %L size (in bytes) of the messages shown -# (i.e., which match the current limit) * -# %m the number of messages in the mailbox * -# %M the number of messages shown (i.e., which match the current limit) * -# %n number of new messages in the mailbox * -# %o number of old unread messages * -# %p number of postponed messages * -# %P percentage of the way through the index -# %r modified/read-only/won't-write/attach-message indicator, -# according to $status_chars -# %s current sorting mode ($sort) -# %S current aux sorting method ($sort_aux) -# %t number of tagged messages * -# %u number of unread messages * -# %v Mutt version string -# %V currently active limit pattern, if any * -# %>X right justify the rest of the string and pad with "X" -# %|X pad to the end of the line with "X" -# -# -# * = can be optionally printed if nonzero -# -# Some of the above sequences can be used to optionally print a string -# if their value is nonzero. For example, you may only want to see the -# number of flagged messages if such messages exist, since zero is not -# particularly meaningful. To optionally print a string based upon one -# of the above sequences, the following construct is used: -# -# %??? -# -# where sequence_char is a character from the table above, and -# optional_string is the string you would like printed if -# sequence_char is nonzero. optional_string may contain -# other sequences as well as normal text, but you may not nest -# optional strings. -# -# Here is an example illustrating how to optionally print the number of -# new messages in a mailbox: -# %?n?%n new messages.? -# -# You can also switch between two strings using the following construct: -# -# %??&? -# -# If the value of sequence_char is non-zero, if_string will -# be expanded, otherwise else_string will be expanded. -# -# You can force the result of any printf-like sequence to be lowercase -# by prefixing the sequence character with an underscore (_) sign. -# For example, if you want to display the local hostname in lowercase, -# you would use: -# %_h -# -# If you prefix the sequence character with a colon (:) character, mutt -# will replace any dots in the expansion by underscores. This might be helpful -# with IMAP folders that don't like dots in folder names. -# -set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?[%V] ?(%s/%S) %> (%P) " -# -# set status_on_top=no -# -# Name: status_on_top -# Type: boolean -# Default: no -# -# -# Setting this variable causes the ``status bar'' to be displayed on -# the first line of the screen rather than near the bottom. -# -# -# set strict_threads=no -# -# Name: strict_threads -# Type: boolean -# Default: no -# -# -# If set, threading will only make use of the ``In-Reply-To'' and -# ``References'' fields when you ``$sort'' by message threads. By -# default, messages with the same subject are grouped together in -# ``pseudo threads.''. This may not always be desirable, such as in a -# personal mailbox where you might have several unrelated messages with -# the subject ``hi'' which will get grouped together. See also -# ``$sort_re'' for a less drastic way of controlling this -# behaviour. -# -# -# set suspend=yes -# -# Name: suspend -# Type: boolean -# Default: yes -# -# -# When unset, mutt won't stop when the user presses the terminal's -# susp key, usually ``control-Z''. This is useful if you run mutt -# inside an xterm using a command like xterm -e mutt. -# -# -# set text_flowed=no -# -# Name: text_flowed -# Type: boolean -# Default: no -# -# -# When set, mutt will generate text/plain; format=flowed attachments. -# This format is easier to handle for some mailing software, and generally -# just looks like ordinary text. To actually make use of this format's -# features, you'll need support in your editor. -# -# Note that $indent_string is ignored when this option is set. -# -# -# set thread_received=no -# -# Name: thread_received -# Type: boolean -# Default: no -# -# -# When set, mutt uses the date received rather than the date sent -# to thread messages by subject. -# -# -# set thorough_search=no -# -# Name: thorough_search -# Type: boolean -# Default: no -# -# -# Affects the ~b and ~h search operations described in -# section ``patterns'' above. If set, the headers and attachments of -# messages to be searched are decoded before searching. If unset, -# messages are searched as they appear in the folder. -# -set thorough_search=yes -# -# set tilde=no -# -# Name: tilde -# Type: boolean -# Default: no -# -# -# When set, the internal-pager will pad blank lines to the bottom of the -# screen with a tilde (~). -# -# -# set timeout=600 -# -# Name: timeout -# Type: number -# Default: 600 -# -# -# This variable controls the number of seconds Mutt will wait -# for a key to be pressed in the main menu before timing out and -# checking for new mail. A value of zero or less will cause Mutt -# to never time out. -# -# -# set tmpdir="" -# -# Name: tmpdir -# Type: path -# Default: "" -# -# -# This variable allows you to specify where Mutt will place its -# temporary files needed for displaying and composing messages. If -# this variable is not set, the environment variable TMPDIR is -# used. If TMPDIR is not set then "/tmp" is used. -# -set tmpdir="~/.tmp" -# -# set to_chars=" +TCFL" -# -# Name: to_chars -# Type: string -# Default: " +TCFL" -# -# -# Controls the character used to indicate mail addressed to you. The -# first character is the one used when the mail is NOT addressed to your -# address (default: space). The second is used when you are the only -# recipient of the message (default: +). The third is when your address -# appears in the TO header field, but you are not the only recipient of -# the message (default: T). The fourth character is used when your -# address is specified in the CC header field, but you are not the only -# recipient. The fifth character is used to indicate mail that was sent -# by you. The sixth character is used to indicate when a mail -# was sent to a mailing-list you subscribe to (default: L). -# -# -# set trash="" -# -# Name: trash -# Type: path -# Default: "" -# -# -# If set, this variable specifies the path of the trash folder where the -# mails marked for deletion will be moved, instead of being irremediably -# purged. -# -# NOTE: When you delete a message in the trash folder, it is really -# deleted, so that you have a way to clean the trash. -# -# -# set tunnel="" -# -# Name: tunnel -# Type: string -# Default: "" -# -# -# Setting this variable will cause mutt to open a pipe to a command -# instead of a raw socket. You may be able to use this to set up -# preauthenticated connections to your IMAP/POP3 server. Example: -# -# tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" -# -# NOTE: For this example to work you must be able to log in to the remote -# machine without having to enter a password. -# -# -# set use_8bitmime=no -# -# Name: use_8bitmime -# Type: boolean -# Default: no -# -# -# Warning: do not set this variable unless you are using a version -# of sendmail which supports the -B8BITMIME flag (such as sendmail -# 8.8.x) or you may not be able to send mail. -# -# When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME -# flag when sending 8-bit messages to enable ESMTP negotiation. -# -# -# set use_domain=yes -# -# Name: use_domain -# Type: boolean -# Default: yes -# -# -# When set, Mutt will qualify all local addresses (ones without the -# @host portion) with the value of ``$hostname''. If unset, no -# addresses will be qualified. -# -# -# set use_envelope_from=no -# -# Name: use_envelope_from -# Type: boolean -# Default: no -# -# -# When set, mutt will use ``$envelope_from_address'' as the -# envelope sender if that is set, otherwise it will attempt to -# derive it from the "From:" header. Note that this information is passed -# to sendmail command using the "-f" command line switch, so don't set this -# option if you are using that switch in $sendmail yourself, -# or if the sendmail on your machine doesn't support that command -# line switch. -# -# -# set use_from=yes -# -# Name: use_from -# Type: boolean -# Default: yes -# -# -# When set, Mutt will generate the `From:' header field when -# sending messages. If unset, no `From:' header field will be -# generated unless the user explicitly sets one using the ``my_hdr'' -# command. -# -# -# set use_idn=yes -# -# Name: use_idn -# Type: boolean -# Default: yes -# -# -# When set, Mutt will show you international domain names decoded. -# Note: You can use IDNs for addresses even if this is unset. -# This variable only affects decoding. -# -# -# set use_ipv6=yes -# -# Name: use_ipv6 -# Type: boolean -# Default: yes -# -# -# When set, Mutt will look for IPv6 addresses of hosts it tries to -# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. -# Normally, the default should work. -# -# -# set user_agent=yes -# -# Name: user_agent -# Type: boolean -# Default: yes -# -# -# When set, mutt will add a "User-Agent" header to outgoing -# messages, indicating which version of mutt was used for composing -# them. -# -# -# set visual="" -# -# Name: visual -# Type: path -# Default: "" -# -# -# Specifies the visual editor to invoke when the ~v command is -# given in the builtin editor. -# -# -# set wait_key=yes -# -# Name: wait_key -# Type: boolean -# Default: yes -# -# -# Controls whether Mutt will ask you to press a key after shell- -# escape, pipe-message, pipe-entry, print-message, -# and print-entry commands. -# -# It is also used when viewing attachments with ``auto_view'', provided -# that the corresponding mailcap entry has a needsterminal flag, -# and the external program is interactive. -# -# When set, Mutt will always ask for a key. When unset, Mutt will wait -# for a key only if the external command returned a non-zero status. -# -set wait_key=no -# -# set weed=yes -# -# Name: weed -# Type: boolean -# Default: yes -# -# -# When set, mutt will weed headers when displaying, forwarding, -# printing, or replying to messages. -# -# -# set wrap=0 -# -# Name: wrap -# Type: number -# Default: 0 -# -# -# When set to a positive value, mutt will wrap text at $wrap characters. -# When set to a negative value, mutt will wrap text so that there are $wrap -# characters of empty space on the right side of the terminal. -# -set wrap=80 -# -# set wrap_search=yes -# -# Name: wrap_search -# Type: boolean -# Default: yes -# -# -# Controls whether searches wrap around the end of the mailbox. -# -# When set, searches will wrap around the first (or last) message. When -# unset, searches will not wrap. -# -# -# set wrapmargin=0 -# -# Name: wrapmargin -# Type: number -# Default: 0 -# -# -# (DEPRECATED) Equivalent to setting wrap with a negative value. -# -# -# set write_inc=10 -# -# Name: write_inc -# Type: number -# Default: 10 -# -# -# When writing a mailbox, a message will be printed every -# write_inc messages to indicate progress. If set to 0, only a -# single message will be displayed before writing a mailbox. -# -# Also see the ``$read_inc'' variable. -# -# -# set write_bcc=yes -# -# Name: write_bcc -# Type: boolean -# Default: yes -# -# -# Controls whether mutt writes out the Bcc header when preparing -# messages to be sent. Exim users may wish to unset this. If mutt -# is set to deliver directly via SMTP (see ``$smtp_url''), this -# option does nothing: mutt will never write out the BCC header -# in this case. -# -# Note: On Debian systems, exim4 and postfix strip BCC headers by -# default. The above warning applies to exim3 users, see /etc/Muttrc. -# -# -# set xterm_icon="M%?n?AIL&ail?" -# -# Name: xterm_icon -# Type: string -# Default: "M%?n?AIL&ail?" -# -# -# Controls the format of the icon title, as long as xterm_set_titles -# is enabled. This string is identical in formatting to the one used by -# ``$status_format''. -# -# -# set xterm_set_titles=no -# -# Name: xterm_set_titles -# Type: boolean -# Default: no -# -# -# Controls whether mutt sets the xterm title bar and icon name -# (as long as you are in an appropriate terminal). -# -set xterm_set_titles=yes -# -# set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" -# -# Name: xterm_title -# Type: string -# Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" -# -# -# Controls the format of the title bar of the xterm provided that -# xterm_set_titles has been set. This string is identical in formatting -# to the one used by ``$status_format''. -# -set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?" -# +auto_view text/html application/ics text/calendar +#auto_view application/x-gunzip application/x-tar-gz application/x-tar application/x-gtar +#auto_view application/postscript +alternative_order multipart/mixed multipart/related text/html text/enriched text/* +#alternative_order text/plain text/enriched text/html +#alternative_order text/enriched text/plain text application/postscript image/* +mime_lookup application/octet-stream + +mailto_allow cc in-reply-to references subject body -alternative_order text/enriched text/plain text application/postscript image/* +set my_mutt_mailboxes = "$VARDIR/mutt/mailboxes" +source "test -f $my_mutt_mailboxes && cat $my_mutt_mailboxes|" + +set alias_file="$my_confdir/aliases" +source "test -f $alias_file && cat $alias_file 2>/dev/null || echo unset alias_file|" source $my_confdir/colours source $my_confdir/headers @@ -4441,6 +25,5 @@ source $my_confdir/keybindings source $my_confdir/lists source $my_confdir/spam source $my_confdir/hooks - -set my_mailboxes = `ls ~/.var/offlineimap/mailboxes 2>/dev/null || echo /dev/null` -source $my_mailboxes +source $my_confdir/sidebar +source $my_confdir/confvars