From: martin f. krafft Date: Fri, 18 Jan 2019 08:55:18 +0000 (+1300) Subject: Factor out confvars to autogenerated file X-Git-Url: https://git.madduck.net/etc/mutt.git/commitdiff_plain/a5ab5741acbc36d8f5d8a527639edaad4143f2f8 Factor out confvars to autogenerated file --- diff --git a/.gitignore.d/mutt b/.gitignore.d/mutt index 757457b..17a9235 100644 --- a/.gitignore.d/mutt +++ b/.gitignore.d/mutt @@ -7,8 +7,9 @@ !/.mutt/append-header !/.mutt/batch-subject-editor !/.mutt/bgrun -!/.mutt/browserrun +!/.mutt/bgrun-fifo !/.mutt/colours +!/.mutt/confvars !/.mutt/edit-header !/.mutt/filter-proxy !/.mutt/get-timestamp @@ -24,6 +25,7 @@ !/.mutt/mailcap.editing !/.mutt/mailcap.htmldump !/.mutt/mailcap.icalendar +!/.mutt/mkconf !/.mutt/muttrc !/.muttprintrc !/.mutt/remove-header diff --git a/.mutt/confvars b/.mutt/confvars new file mode 100644 index 0000000..89eac1c --- /dev/null +++ b/.mutt/confvars @@ -0,0 +1,5337 @@ +# Auto-generated using mkconf from manual.txt +# on 2019-01-18 23:23:40 +# +# Invoked as: ./mkconf confvars +# + +# 3.1. abort_noattach +# +# Type: quadoption +# Default: no +# +# When the body of the message matches $abort_noattach_regexp and there are no +# attachments, this quadoption controls whether to abort sending the message. +# +set abort_noattach=ask-yes + + +# 3.2. abort_noattach_regexp +# +# Type: regular expression +# Default: “attach” +# +# Specifies a regular expression to match against the body of the message, to +# determine if an attachment was mentioned but mistakenly forgotten. If it +# matches, $abort_noattach will be consulted to determine if message sending will +# be aborted. +# +# Like other regular expressions in Mutt, the search is case sensitive if the +# pattern contains at least one upper case letter, and case insensitive +# otherwise. +# +set abort_noattach_regexp='attach|beigefügt|angehängt|an(hang|lage)' +#'attach(ing|ed|ment)?|included\W+(with|in)\W+th(is|e\W+(curr|pres)ent)\W+mail|an(geh(ä|=E4|=C3=A4)ngt|h(ä|=E4|=C3=A4)ngsel|bei)|bei(gef(ü|=FC|=C3=BC)gt|lage)|(im|siehe)\W+(anhang|beilage)|attach(e|er|(é|=E9|=C3=A9)e?s?|ement|ant)' + + +# 3.3. abort_nosubject +# +# Type: quadoption +# Default: ask-yes +# +# If set to yes, when composing messages and no subject is given at the subject +# prompt, composition will be aborted. If set to no, composing messages with no +# subject given at the subject prompt will never be aborted. +# + + +# 3.4. abort_unmodified +# +# Type: quadoption +# Default: yes +# +# If set to yes, composition will automatically abort after editing the message +# body if no changes are made to the file (this check only happens after the +# first edit of the file). When set to no, composition will never be aborted. +# + + +# 3.5. alias_file +# +# Type: path +# Default: “~/.muttrc” +# +# The default file in which to save aliases created by the +# function. Entries added to this file are encoded in the character set specified +# by $config_charset if it is set or the current character set otherwise. +# +# Note: Mutt will not automatically source this file; you must explicitly use the +# “source” command for it to be executed in case this option points to a +# dedicated alias file. +# +# The default for this option is the currently used muttrc file, or “~/.muttrc” +# if no user muttrc was found. +# +set alias_file="$my_confdir/aliases" + + +# 3.6. alias_format +# +# Type: string +# Default: “%4n %2f %t %-10a %r” +# +# Specifies the format of the data displayed for the “alias” menu. The following +# printf(3)-style sequences are available: +# +# ┌──┬──────────────────────────────────────────────────────────────┐ +# │%a│alias name │ +# ├──┼──────────────────────────────────────────────────────────────┤ +# │%f│flags - currently, a “d” for an alias marked for deletion │ +# ├──┼──────────────────────────────────────────────────────────────┤ +# │%n│index number │ +# ├──┼──────────────────────────────────────────────────────────────┤ +# │%r│address which alias expands to │ +# ├──┼──────────────────────────────────────────────────────────────┤ +# │%t│character which indicates if the alias is tagged for inclusion│ +# └──┴──────────────────────────────────────────────────────────────┘ +# + + +# 3.7. allow_8bit +# +# Type: boolean +# Default: yes +# +# Controls whether 8-bit data is converted to 7-bit using either Quoted- +# Printable or Base64 encoding when sending mail. +# + + +# 3.8. allow_ansi +# +# Type: boolean +# Default: no +# +# Controls whether ANSI color codes in messages (and color tags in rich text +# messages) are to be interpreted. Messages containing these codes are rare, but +# if this option is set, their text will be colored accordingly. Note that this +# may override your color choices, and even present a security problem, since a +# message could include a line like +# +# [-- PGP output follows ... +# +# and give it the same color as your attachment color (see also $crypt_timestamp +# ). +# + + +# 3.9. arrow_cursor +# +# Type: boolean +# Default: no +# +# When set, an arrow (“->”) will be used to indicate the current entry in menus +# instead of highlighting the whole line. On slow network or modem links this +# will make response faster because there is less that has to be redrawn on the +# screen when moving to the next or previous entries in the menu. +# + + +# 3.10. ascii_chars +# +# Type: boolean +# Default: no +# +# If set, Mutt will use plain ASCII characters when displaying thread and +# attachment trees, instead of the default ACS characters. +# + + +# 3.11. askbcc +# +# Type: boolean +# Default: no +# +# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before +# editing an outgoing message. +# + + +# 3.12. askcc +# +# Type: boolean +# Default: no +# +# If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing the +# body of an outgoing message. +# + + +# 3.13. assumed_charset +# +# Type: string +# Default: (empty) +# +# This variable is a colon-separated list of character encoding schemes for +# messages without character encoding indication. Header field values and message +# body content without character encoding indication would be assumed that they +# are written in one of this list. By default, all the header fields and message +# body without any charset indication are assumed to be in “us-ascii”. +# +# For example, Japanese users might prefer this: +# +# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" +# +# However, only the first content is valid for the message body. +# + + +# 3.14. attach_charset +# +# Type: string +# Default: (empty) +# +# This variable is a colon-separated list of character encoding schemes for text +# file attachments. Mutt uses this setting to guess which encoding files being +# attached are encoded in to convert them to a proper character set given in +# $send_charset. +# +# If unset, the value of $charset will be used instead. For example, the +# following configuration would work for Japanese text handling: +# +# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" +# +# Note: for Japanese users, “iso-2022-*” must be put at the head of the value as +# shown above if included. +# + + +# 3.15. attach_format +# +# Type: string +# Default: “%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ” +# +# This variable describes the format of the “attachment” menu. The following +# printf(3)-style sequences are understood: +# +# ┌───┬─────────────────────────────────────────────────────────────────────────┐ +# │%C │charset │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%c │requires charset conversion (“n” or “c”) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%D │deleted flag │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%d │description (if none, falls back to %F) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%e │MIME content-transfer-encoding │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%F │filename in content-disposition header (if none, falls back to %f) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%f │filename │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%I │disposition (“I” for inline, “A” for attachment) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%m │major MIME type │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%M │MIME subtype │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%n │attachment number │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%Q │“Q”, if MIME part qualifies for attachment counting │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%s │size │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%t │tagged flag │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%T │graphic tree characters │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%u │unlink (=to delete) flag │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%X │number of qualifying MIME parts in this part and its children (please see│ +# │ │the “attachments” section for possible speed effects) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%>X│right justify the rest of the string and pad with character “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%|X│pad to the end of the line with character “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%*X│soft-fill with character “X” as pad │ +# └───┴─────────────────────────────────────────────────────────────────────────┘ +# +# For an explanation of “soft-fill”, see the $index_format documentation. +# + + +# 3.16. attach_sep +# +# Type: string +# Default: “n” +# +# The separator to add between attachments when operating (saving, printing, +# piping, etc) on a list of tagged attachments. +# + + +# 3.17. attach_split +# +# Type: boolean +# Default: yes +# +# If this variable is unset, when operating (saving, printing, piping, etc) on a +# list of tagged attachments, Mutt will concatenate the attachments and will +# operate on them as a single attachment. The $attach_sep separator is added +# after each attachment. When set, Mutt will operate on the attachments one by +# one. +# + + +# 3.18. attribution +# +# Type: string +# Default: “On %d, %n wrote:” +# +# This is the string that will precede a message which has been included in a +# reply. For a full listing of defined printf(3)-like sequences see the section +# on $index_format. +# +set attribution="also sprach %n <%a> [%[%Y-%m-%d %H:%M %z]]:" + + +# 3.19. attribution_locale +# +# Type: string +# Default: (empty) +# +# The locale used by strftime(3) to format dates in the attribution string. Legal +# values are the strings your system accepts for the locale environment variable +# $LC_TIME. +# +# This variable is to allow the attribution date format to be customized by +# recipient or folder using hooks. By default, Mutt will use your locale +# environment, so there is no need to set this except to override that default. +# + + +# 3.20. auto_tag +# +# Type: boolean +# Default: no +# +# When set, functions in the index menu which affect a message will be applied to +# all tagged messages (if there are any). When unset, you must first use the +# function (bound to “;” by default) to make the next function apply +# to all tagged messages. +# + + +# 3.21. autoedit +# +# Type: boolean +# Default: no +# +# When set along with $edit_headers, Mutt will skip the initial send-menu +# (prompting for subject and recipients) and allow you to immediately begin +# editing the body of your message. The send-menu may still be accessed once you +# have finished editing the body of your message. +# +# Note: when this option is set, you cannot use send-hooks that depend on the +# recipients when composing a new (non-reply) message, as the initial list of +# recipients is empty. +# +# Also see $fast_reply. +# + + +# 3.22. beep +# +# Type: boolean +# Default: yes +# +# When this variable is set, mutt will beep when an error occurs. +# +set beep=no + + +# 3.23. beep_new +# +# Type: boolean +# Default: no +# +# When this variable is set, mutt will beep whenever it prints a message +# notifying you of new mail. This is independent of the setting of the $beep +# variable. +# + + +# 3.24. bounce +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether you will be asked to confirm bouncing messages. If set to yes +# you don't get asked if you want to bounce a message. Setting this variable to +# no is not generally useful, and thus not recommended, because you are unable to +# bounce messages. +# + + +# 3.25. bounce_delivered +# +# Type: boolean +# Default: yes +# +# When this variable is set, mutt will include Delivered-To headers when bouncing +# messages. Postfix users may wish to unset this variable. +# +set bounce_delivered=no + + +# 3.26. braille_friendly +# +# Type: boolean +# Default: no +# +# When this variable is set, mutt will place the cursor at the beginning of the +# current line in menus, even when the $arrow_cursor variable is unset, making it +# easier for blind persons using Braille displays to follow these menus. The +# option is unset by default because many visual terminals don't permit making +# the cursor invisible. +# + + +# 3.27. browser_abbreviate_mailboxes +# +# Type: boolean +# Default: yes +# +# When this variable is set, mutt will abbreviate mailbox names in the browser +# mailbox list, using '~' and '=' shortcuts. +# +# The default "alpha" setting of $sort_browser uses locale-based sorting (using +# strcoll(3)), which ignores some punctuation. This can lead to some situations +# where the order doesn't make intuitive sense. In those cases, it may be +# desirable to unset this variable. +# + + +# 3.28. certificate_file +# +# Type: path +# Default: “~/.mutt_certificates” +# +# This variable specifies the file where the certificates you trust are saved. +# When an unknown certificate is encountered, you are asked if you accept it or +# not. If you accept it, the certificate can also be saved in this file and +# further connections are automatically accepted. +# +# You can also manually add CA certificates in this file. Any server certificate +# that is signed with one of these CA certificates is also automatically +# accepted. +# +# Example: +# +# set certificate_file=~/.mutt/certificates +# + + +# 3.29. change_folder_next +# +# Type: boolean +# Default: no +# +# When this variable is set, the function mailbox suggestion will +# start at the next folder in your “mailboxes” list, instead of starting at the +# first folder in the list. +# + + +# 3.30. charset +# +# Type: string +# Default: (empty) +# +# Character set your terminal uses to display and enter textual data. It is also +# the fallback for $send_charset. +# +# Upon startup Mutt tries to derive this value from environment variables such as +# $LC_CTYPE or $LANG. +# +# Note: It should only be set in case Mutt isn't able to determine the character +# set used correctly. +# + + +# 3.31. check_mbox_size +# +# Type: boolean +# Default: no +# +# When this variable is set, mutt will use file size attribute instead of access +# time when checking for new mail in mbox and mmdf folders. +# +# This variable is unset by default and should only be enabled when new mail +# detection for these folder types is unreliable or doesn't work. +# +# Note that enabling this variable should happen before any “mailboxes” +# directives occur in configuration files regarding mbox or mmdf folders because +# mutt needs to determine the initial new mail status of such a mailbox by +# performing a fast mailbox scan when it is defined. Afterwards the new mail +# status is tracked by file size changes. +# + + +# 3.32. check_new +# +# Type: boolean +# Default: yes +# +# Note: this option only affects maildir and MH style mailboxes. +# +# When set, Mutt will check for new mail delivered while the mailbox is open. +# Especially with MH mailboxes, this operation can take quite some time since it +# involves scanning the directory and checking each file to see if it has already +# been looked at. If this variable is unset, no check for new mail is performed +# while the mailbox is open. +# + + +# 3.33. collapse_unread +# +# Type: boolean +# Default: yes +# +# When unset, Mutt will not collapse a thread if it contains any unread messages. +# + + +# 3.34. compose_format +# +# Type: string +# Default: “-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-” +# +# Controls the format of the status line displayed in the “compose” menu. This +# string is similar to $status_format, but has its own set of printf(3)-like +# sequences: +# +# ┌──┬──────────────────────────────────────────────────┐ +# │%a│total number of attachments │ +# ├──┼──────────────────────────────────────────────────┤ +# │%h│local hostname │ +# ├──┼──────────────────────────────────────────────────┤ +# │%l│approximate size (in bytes) of the current message│ +# ├──┼──────────────────────────────────────────────────┤ +# │%v│Mutt version string │ +# └──┴──────────────────────────────────────────────────┘ +# +# See the text describing the $status_format option for more information on how +# to set $compose_format. +# + + +# 3.35. config_charset +# +# Type: string +# Default: (empty) +# +# When defined, Mutt will recode commands in rc files from this encoding to the +# current character set as specified by $charset and aliases written to +# $alias_file from the current character set. +# +# Please note that if setting $charset it must be done before setting +# $config_charset. +# +# Recoding should be avoided as it may render unconvertable characters as +# question marks which can lead to undesired side effects (for example in regular +# expressions). +# + + +# 3.36. confirmappend +# +# Type: boolean +# Default: yes +# +# When set, Mutt will prompt for confirmation when appending messages to an +# existing mailbox. +# +set confirmappend=no + + +# 3.37. confirmcreate +# +# Type: boolean +# Default: yes +# +# When set, Mutt will prompt for confirmation when saving messages to a mailbox +# which does not yet exist before creating it. +# + + +# 3.38. connect_timeout +# +# Type: number +# Default: 30 +# +# Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this +# many seconds if the connection is not able to be established. A negative value +# causes Mutt to wait indefinitely for the connection attempt to succeed. +# + + +# 3.39. content_type +# +# Type: string +# Default: “text/plain” +# +# Sets the default Content-Type for the body of newly composed messages. +# + + +# 3.40. copy +# +# Type: quadoption +# Default: yes +# +# This variable controls whether or not copies of your outgoing messages will be +# saved for later references. Also see $record, $save_name, $force_name and “ +# fcc-hook”. +# +set copy=yes + + +# 3.41. crypt_autoencrypt +# +# Type: boolean +# Default: no +# +# Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing +# messages. This is probably only useful in connection to the “send-hook” +# command. It can be overridden by use of the pgp menu, when encryption is not +# required or signing is requested as well. If $smime_is_default is set, then +# OpenSSL is used instead to create S/MIME messages and settings can be +# overridden by use of the smime menu instead. (Crypto only) +# + + +# 3.42. crypt_autopgp +# +# Type: boolean +# Default: yes +# +# This variable controls whether or not mutt may automatically enable PGP +# encryption/signing for messages. See also $crypt_autoencrypt, +# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default. +# + + +# 3.43. crypt_autosign +# +# Type: boolean +# Default: no +# +# Setting this variable will cause Mutt to always attempt to cryptographically +# sign outgoing messages. This can be overridden by use of the pgp menu, when +# signing is not required or encryption is requested as well. If +# $smime_is_default is set, then OpenSSL is used instead to create S/MIME +# messages and settings can be overridden by use of the smime menu instead of the +# pgp menu. (Crypto only) +# +set crypt_autosign=yes + + +# 3.44. crypt_autosmime +# +# Type: boolean +# Default: yes +# +# This variable controls whether or not mutt may automatically enable S/MIME +# encryption/signing for messages. See also $crypt_autoencrypt, +# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default. +# + + +# 3.45. crypt_confirmhook +# +# Type: boolean +# Default: yes +# +# If set, then you will be prompted for confirmation of keys when using the +# crypt-hook command. If unset, no such confirmation prompt will be presented. +# This is generally considered unsafe, especially where typos are concerned. +# + + +# 3.46. crypt_opportunistic_encrypt +# +# Type: boolean +# Default: no +# +# Setting this variable will cause Mutt to automatically enable and disable +# encryption, based on whether all message recipient keys can be located by Mutt. +# +# When this option is enabled, Mutt will enable/disable encryption each time the +# TO, CC, and BCC lists are edited. If $edit_headers is set, Mutt will also do so +# each time the message is edited. +# +# While this is set, encryption can't be manually enabled/disabled. The pgp or +# smime menus provide a selection to temporarily disable this option for the +# current message. +# +# If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for a message, +# this option will be disabled for that message. It can be manually re-enabled in +# the pgp or smime menus. (Crypto only) +# +set crypt_opportunistic_encrypt=yes + + +# 3.47. crypt_replyencrypt +# +# Type: boolean +# Default: yes +# +# If set, automatically PGP or OpenSSL encrypt replies to messages which are +# encrypted. (Crypto only) +# + + +# 3.48. crypt_replysign +# +# Type: boolean +# Default: no +# +# If set, automatically PGP or OpenSSL sign replies to messages which are signed. +# +# Note: this does not work on messages that are encrypted and signed! (Crypto +# only) +# +set crypt_replysign=yes + + +# 3.49. crypt_replysignencrypted +# +# Type: boolean +# Default: no +# +# If set, automatically PGP or OpenSSL sign replies to messages which are +# encrypted. This makes sense in combination with $crypt_replyencrypt, because it +# allows you to sign all messages which are automatically encrypted. This works +# around the problem noted in $crypt_replysign, that mutt is not able to find out +# whether an encrypted message is also signed. (Crypto only) +# +set crypt_replysignencrypted=yes + + +# 3.50. crypt_timestamp +# +# Type: boolean +# Default: yes +# +# If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME +# output, so spoofing such lines is more difficult. If you are using colors to +# mark these lines, and rely on these, you may unset this setting. (Crypto only) +# + + +# 3.51. crypt_use_gpgme +# +# Type: boolean +# Default: no +# +# This variable controls the use of the GPGME-enabled crypto backends. If it is +# set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP +# will be used instead of the classic code. Note that you need to set this option +# in .muttrc; it won't have any effect when used interactively. +# +# Note that the GPGME backend does not support creating old-style inline +# (traditional) PGP encrypted or signed messages (see $pgp_autoinline). +# + + +# 3.52. crypt_use_pka +# +# Type: boolean +# Default: no +# +# Controls whether mutt uses PKA (see http://www.g10code.de/docs/ +# pka-intro.de.pdf) during signature verification (only supported by the GPGME +# backend). +# + + +# 3.53. crypt_verify_sig +# +# Type: quadoption +# Default: yes +# +# If “yes”, always attempt to verify PGP or S/MIME signatures. If “ask-*”, ask +# whether or not to verify the signature. If “no”, never attempt to verify +# cryptographic signatures. (Crypto only) +# + + +# 3.54. date_format +# +# Type: string +# Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z” +# +# This variable controls the format of the date printed by the “%d” sequence in +# $index_format. This is passed to the strftime(3) function to process the date, +# see the man page for the proper syntax. +# +# Unless the first character in the string is a bang (“!”), the month and week +# day names are expanded according to the locale. If the first character in the +# string is a bang, the bang is discarded, and the month and week day names in +# the rest of the string are expanded in the C locale (that is in US English). +# +set date_format="%d %b %Y %T%Z" + + +# 3.55. default_hook +# +# Type: string +# Default: “~f %s !~P | (~P ~C %s)” +# +# This variable controls how “message-hook”, “reply-hook”, “send-hook”, “ +# send2-hook”, “save-hook”, and “fcc-hook” will be interpreted if they are +# specified with only a simple regexp, instead of a matching pattern. The hooks +# are expanded when they are declared, so a hook will be interpreted according to +# the value of this variable at the time the hook is declared. +# +# The default value matches if the message is either from a user matching the +# regular expression given, or if it is from you (if the from address matches “ +# alternates”) and is to or cc'ed to a user matching the given regular +# expression. +# + + +# 3.56. delete +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether or not messages are really deleted when closing or +# synchronizing a mailbox. If set to yes, messages marked for deleting will +# automatically be purged without prompting. If set to no, messages marked for +# deletion will be kept in the mailbox. +# +set delete=yes + + +# 3.57. delete_untag +# +# Type: boolean +# Default: yes +# +# If this option is set, mutt will untag messages when marking them for deletion. +# This applies when you either explicitly delete a message, or when you save it +# to another folder. +# + + +# 3.58. digest_collapse +# +# Type: boolean +# Default: yes +# +# If this option is set, mutt's received-attachments menu will not show the +# subparts of individual messages in a multipart/digest. To see these subparts, +# press “v” on that menu. +# + + +# 3.59. display_filter +# +# Type: path +# Default: (empty) +# +# When set, specifies a command used to filter messages. When a message is viewed +# it is passed as standard input to $display_filter, and the filtered message is +# read from the standard output. +# + + +# 3.60. dotlock_program +# +# Type: path +# Default: “/usr/bin/mutt_dotlock” +# +# Contains the path of the mutt_dotlock(8) binary to be used by mutt. +# + + +# 3.61. dsn_notify +# +# Type: string +# Default: (empty) +# +# This variable sets the request for when notification is returned. The string +# consists of a comma separated list (no spaces!) of one or more of the +# following: never, to never request notification, failure, to request +# notification on transmission failure, delay, to be notified of message delays, +# success, to be notified of successful transmission. +# +# Example: +# +# set dsn_notify="failure,delay" +# +# Note: when using $sendmail for delivery, you should not enable this unless you +# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1) +# -compatible interface supporting the -N option for DSN. For SMTP delivery, DSN +# support is auto-detected so that it depends on the server whether DSN will be +# used or not. +# + + +# 3.62. dsn_return +# +# Type: string +# Default: (empty) +# +# This variable controls how much of your message is returned in DSN messages. It +# may be set to either hdrs to return just the message header, or full to return +# the full message. +# +# Example: +# +# set dsn_return=hdrs +# +# Note: when using $sendmail for delivery, you should not enable this unless you +# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1) +# -compatible interface supporting the -R option for DSN. For SMTP delivery, DSN +# support is auto-detected so that it depends on the server whether DSN will be +# used or not. +# + + +# 3.63. duplicate_threads +# +# Type: boolean +# Default: yes +# +# This variable controls whether mutt, when $sort is set to threads, threads +# messages with the same Message-Id together. If it is set, it will indicate that +# it thinks they are duplicates of each other with an equals sign in the thread +# tree. +# + + +# 3.64. edit_headers +# +# Type: boolean +# Default: no +# +# This option allows you to edit the header of your outgoing messages along with +# the body of your message. +# +# Although the compose menu may have localized header labels, the labels passed +# to your editor will be standard RFC 2822 headers, (e.g. To:, Cc:, Subject:). +# Headers added in your editor must also be RFC 2822 headers, or one of the +# pseudo headers listed in “edit-header”. Mutt will not understand localized +# header labels, just as it would not when parsing an actual email. +# +# Note that changes made to the References: and Date: headers are ignored for +# interoperability reasons. +# +set edit_headers=yes + + +# 3.65. editor +# +# Type: path +# Default: (empty) +# +# This variable specifies which editor is used by mutt. It defaults to the value +# of the $VISUAL, or $EDITOR, environment variable, or to the string “vi” if +# neither of those are set. +# +# The $editor string may contain a %s escape, which will be replaced by the name +# of the file to be edited. If the %s escape does not appear in $editor, a space +# and the name to be edited are appended. +# +# The resulting string is then executed by running +# +# sh -c 'string' +# +# where string is the expansion of $editor described above. +# +set editor="mailplate --edit --auto --keep-unknown" + + +# 3.66. encode_from +# +# Type: boolean +# Default: no +# +# When set, mutt will quoted-printable encode messages when they contain the +# string “From ” (note the trailing space) in the beginning of a line. This is +# useful to avoid the tampering certain mail delivery and transport agents tend +# to do with messages (in order to prevent tools from misinterpreting the line as +# a mbox message separator). +# + + +# 3.67. entropy_file +# +# Type: path +# Default: (empty) +# +# The file which includes random data that is used to initialize SSL library +# functions. +# + + +# 3.68. envelope_from_address +# +# Type: e-mail address +# Default: (empty) +# +# Manually sets the envelope sender for outgoing messages. This value is ignored +# if $use_envelope_from is unset. +# + + +# 3.69. error_history +# +# Type: number +# Default: 30 +# +# This variable controls the size (in number of strings remembered) of the error +# messages displayed by mutt. These can be shown with the +# function. The history is cleared each time this variable is set. +# + + +# 3.70. escape +# +# Type: string +# Default: “~” +# +# Escape character to use for functions in the built-in editor. +# + + +# 3.71. fast_reply +# +# Type: boolean +# Default: no +# +# When set, the initial prompt for recipients and subject are skipped when +# replying to messages, and the initial prompt for subject is skipped when +# forwarding messages. +# +# Note: this variable has no effect when the $autoedit variable is set. +# +set fast_reply=yes + + +# 3.72. fcc_attach +# +# Type: quadoption +# Default: yes +# +# This variable controls whether or not attachments on outgoing messages are +# saved along with the main body of your message. +# +set fcc_attach=yes + + +# 3.73. fcc_clear +# +# Type: boolean +# Default: no +# +# When this variable is set, FCCs will be stored unencrypted and unsigned, even +# when the actual message is encrypted and/or signed. (PGP only) +# + + +# 3.74. flag_safe +# +# Type: boolean +# Default: no +# +# If set, flagged messages cannot be deleted. +# + + +# 3.75. folder +# +# Type: path +# Default: “~/Mail” +# +# Specifies the default location of your mailboxes. A “+” or “=” at the beginning +# of a pathname will be expanded to the value of this variable. Note that if you +# change this variable (from the default) value you need to make sure that the +# assignment occurs before you use “+” or “=” for any other variables since +# expansion takes place when handling the “mailboxes” command. +# +set folder="~/mail" + + +# 3.76. folder_format +# +# Type: string +# Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f” +# +# This variable allows you to customize the file browser display to your personal +# taste. This string is similar to $index_format, but has its own set of printf +# (3)-like sequences: +# +# ┌───┬─────────────────────────────────────────────────────────────────────────┐ +# │%C │current file number │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%d │date/time folder was last modified │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%D │date/time folder was last modified using $date_format. │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%f │filename (“/” is appended to directory names, “@” to symbolic links and “│ +# │ │*” to executable files) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%F │file permissions │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%g │group name (or numeric gid, if missing) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%l │number of hard links │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%m │number of messages in the mailbox * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%n │number of unread messages in the mailbox * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%N │N if mailbox has new mail, blank otherwise │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%s │size in bytes │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%t │“*” if the file is tagged, blank otherwise │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%u │owner name (or numeric uid, if missing) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%>X│right justify the rest of the string and pad with character “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%|X│pad to the end of the line with character “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%*X│soft-fill with character “X” as pad │ +# └───┴─────────────────────────────────────────────────────────────────────────┘ +# +# For an explanation of “soft-fill”, see the $index_format documentation. +# +# * = can be optionally printed if nonzero +# +# %m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats +# to be set. %n requires $mail_check_stats to be set (except for IMAP mailboxes). +# + + +# 3.77. followup_to +# +# Type: boolean +# Default: yes +# +# Controls whether or not the “Mail-Followup-To:” header field is generated when +# sending mail. When set, Mutt will generate this field when you are replying to +# a known mailing list, specified with the “subscribe” or “lists” commands. +# +# This field has two purposes. First, preventing you from receiving duplicate +# copies of replies to messages which you send to mailing lists, and second, +# ensuring that you do get a reply separately for any messages sent to known +# lists to which you are not subscribed. +# +# The header will contain only the list's address for subscribed lists, and both +# the list address and your own email address for unsubscribed lists. Without +# this header, a group reply to your message sent to a subscribed list will be +# sent to both the list and your address, resulting in two copies of the same +# email for you. +# + + +# 3.78. force_name +# +# Type: boolean +# Default: no +# +# This variable is similar to $save_name, except that Mutt will store a copy of +# your outgoing message by the username of the address you are sending to even if +# that mailbox does not exist. +# +# Also see the $record variable. +# + + +# 3.79. forward_attribution_intro +# +# Type: string +# Default: “----- Forwarded message from %f -----” +# +# This is the string that will precede a message which has been forwarded in the +# main body of a message (when $mime_forward is unset). For a full listing of +# defined printf(3)-like sequences see the section on $index_format. See also +# $attribution_locale. +# + + +# 3.80. forward_attribution_trailer +# +# Type: string +# Default: “----- End forwarded message -----” +# +# This is the string that will follow a message which has been forwarded in the +# main body of a message (when $mime_forward is unset). For a full listing of +# defined printf(3)-like sequences see the section on $index_format. See also +# $attribution_locale. +# + + +# 3.81. forward_decode +# +# Type: boolean +# Default: yes +# +# Controls the decoding of complex MIME messages into text/plain when forwarding +# a message. The message header is also RFC2047 decoded. This variable is only +# used, if $mime_forward is unset, otherwise $mime_forward_decode is used +# instead. +# + + +# 3.82. forward_decrypt +# +# Type: boolean +# Default: yes +# +# Controls the handling of encrypted messages when forwarding a message. When set +# , the outer layer of encryption is stripped off. This variable is only used if +# $mime_forward is set and $mime_forward_decode is unset. (PGP only) +# + + +# 3.83. forward_edit +# +# Type: quadoption +# Default: yes +# +# This quadoption controls whether or not the user is automatically placed in the +# editor when forwarding messages. For those who always want to forward with no +# modification, use a setting of “no”. +# + + +# 3.84. forward_format +# +# Type: string +# Default: “[%a: %s]” +# +# This variable controls the default subject when forwarding a message. It uses +# the same format sequences as the $index_format variable. +# +set forward_format="(fwd) %s" + + +# 3.85. forward_quote +# +# Type: boolean +# Default: no +# +# When set, forwarded messages included in the main body of the message (when +# $mime_forward is unset) will be quoted using $indent_string. +# + + +# 3.86. from +# +# Type: e-mail address +# Default: (empty) +# +# When set, this variable contains a default from address. It can be overridden +# using “my_hdr” (including from a “send-hook”) and $reverse_name. This variable +# is ignored if $use_from is unset. +# +# This setting defaults to the contents of the environment variable $EMAIL. +# +set from='martin f krafft ' + + +# 3.87. gecos_mask +# +# Type: regular expression +# Default: “^[^,]*” +# +# A regular expression used by mutt to parse the GECOS field of a password entry +# when expanding the alias. The default value will return the string up to the +# first “,” encountered. If the GECOS field contains a string like “lastname, +# firstname” then you should set it to “.*”. +# +# This can be useful if you see the following behavior: you address an e-mail to +# user ID “stevef” whose full name is “Steve Franklin”. If mutt expands “stevef” +# to “"Franklin" stevef@foo.bar” then you should set the $gecos_mask to a regular +# expression that will match the whole name so mutt will expand “Franklin” to “ +# Franklin, Steve”. +# + + +# 3.88. hdrs +# +# Type: boolean +# Default: yes +# +# When unset, the header fields normally added by the “my_hdr” command are not +# created. This variable must be unset before composing a new message or replying +# in order to take effect. If set, the user defined header fields are added to +# every new message. +# + + +# 3.89. header +# +# Type: boolean +# Default: no +# +# When set, this variable causes Mutt to include the header of the message you +# are replying to into the edit buffer. The $weed setting applies. +# + + +# 3.90. header_cache +# +# Type: path +# Default: (empty) +# +# This variable points to the header cache database. If pointing to a directory +# Mutt will contain a header cache database file per folder, if pointing to a +# file that file will be a single global header cache. By default it is unset so +# no header caching will be used. +# +# Header caching can greatly improve speed when opening POP, IMAP MH or Maildir +# folders, see “caching” for details. +# +set header_cache="~/.var/mutt/header_cache" + + +# 3.91. header_cache_compress +# +# Type: boolean +# Default: yes +# +# When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header cache +# backend, this option determines whether the database will be compressed. +# Compression results in database files roughly being one fifth of the usual +# diskspace, but the decompression can result in a slower opening of cached +# folder(s) which in general is still much faster than opening non header cached +# folders. +# +set header_cache_compress=no + + +# 3.92. header_cache_pagesize +# +# Type: string +# Default: “16384” +# +# When mutt is compiled with either gdbm or bdb4 as the header cache backend, +# this option changes the database page size. Too large or too small values can +# waste space, memory, or CPU time. The default should be more or less optimal +# for most use cases. +# + + +# 3.93. header_color_partial +# +# Type: boolean +# Default: no +# +# When set, color header regexps behave like color body regexps: color is applied +# to the exact text matched by the regexp. When unset, color is applied to the +# entire header. +# +# One use of this option might be to apply color to just the header labels. +# +# See “color” for more details. +# + + +# 3.94. help +# +# Type: boolean +# Default: yes +# +# When set, help lines describing the bindings for the major functions provided +# by each menu are displayed on the first line of the screen. +# +# Note: The binding will not be displayed correctly if the function is bound to a +# sequence rather than a single keystroke. Also, the help line may not be updated +# if a binding is changed while Mutt is running. Since this variable is primarily +# aimed at new users, neither of these should present a major problem. +# + + +# 3.95. hidden_host +# +# Type: boolean +# Default: no +# +# When set, mutt will skip the host name part of $hostname variable when adding +# the domain part to addresses. This variable does not affect the generation of +# Message-IDs, and it will not lead to the cut-off of first-level domains. +# + + +# 3.96. hide_limited +# +# Type: boolean +# Default: no +# +# When set, mutt will not show the presence of messages that are hidden by +# limiting, in the thread tree. +# + + +# 3.97. hide_missing +# +# Type: boolean +# Default: yes +# +# When set, mutt will not show the presence of missing messages in the thread +# tree. +# + + +# 3.98. hide_thread_subject +# +# Type: boolean +# Default: yes +# +# When set, mutt will not show the subject of messages in the thread tree that +# have the same subject as their parent or closest previously displayed sibling. +# + + +# 3.99. hide_top_limited +# +# Type: boolean +# Default: no +# +# When set, mutt will not show the presence of messages that are hidden by +# limiting, at the top of threads in the thread tree. Note that when +# $hide_limited is set, this option will have no effect. +# + + +# 3.100. hide_top_missing +# +# Type: boolean +# Default: yes +# +# When set, mutt will not show the presence of missing messages at the top of +# threads in the thread tree. Note that when $hide_missing is set, this option +# will have no effect. +# + + +# 3.101. history +# +# Type: number +# Default: 10 +# +# This variable controls the size (in number of strings remembered) of the string +# history buffer per category. The buffer is cleared each time the variable is +# set. +# + + +# 3.102. history_file +# +# Type: path +# Default: “~/.mutthistory” +# +# The file in which Mutt will save its history. +# +# Also see $save_history. +# +set history_file="~/.var/mutt/history" + + +# 3.103. history_remove_dups +# +# Type: boolean +# Default: no +# +# When set, all of the string history will be scanned for duplicates when a new +# entry is added. Duplicate entries in the $history_file will also be removed +# when it is periodically compacted. +# + + +# 3.104. honor_disposition +# +# Type: boolean +# Default: no +# +# When set, Mutt will not display attachments with a disposition of “attachment” +# inline even if it could render the part to plain text. These MIME parts can +# only be viewed from the attachment menu. +# +# If unset, Mutt will render all MIME parts it can properly transform to plain +# text. +# + + +# 3.105. honor_followup_to +# +# Type: quadoption +# Default: yes +# +# This variable controls whether or not a Mail-Followup-To header is honored when +# group-replying to a message. +# + + +# 3.106. hostname +# +# Type: string +# Default: (empty) +# +# Specifies the fully-qualified hostname of the system mutt is running on +# containing the host's name and the DNS domain it belongs to. It is used as the +# domain part (after “@”) for local email addresses as well as Message-Id +# headers. +# +# Its value is determined at startup as follows: the node's hostname is first +# determined by the uname(3) function. The domain is then looked up using the +# gethostname(2) and getaddrinfo(3) functions. If those calls are unable to +# determine the domain, the full value returned by uname is used. Optionally, +# Mutt can be compiled with a fixed domain name in which case a detected one is +# not used. +# +# Also see $use_domain and $hidden_host. +# + + +# 3.107. idn_decode +# +# Type: boolean +# Default: yes +# +# When set, Mutt will show you international domain names decoded. Note: You can +# use IDNs for addresses even if this is unset. This variable only affects +# decoding. (IDN only) +# + + +# 3.108. idn_encode +# +# Type: boolean +# Default: yes +# +# When set, Mutt will encode international domain names using IDN. Unset this if +# your SMTP server can handle newer (RFC 6531) UTF-8 encoded domains. (IDN only) +# + + +# 3.109. ignore_linear_white_space +# +# Type: boolean +# Default: no +# +# This option replaces linear-white-space between encoded-word and text to a +# single space to prevent the display of MIME-encoded “Subject:” field from being +# divided into multiple lines. +# + + +# 3.110. ignore_list_reply_to +# +# Type: boolean +# Default: no +# +# Affects the behavior of the function when replying to messages from +# mailing lists (as defined by the “subscribe” or “lists” commands). When set, if +# the “Reply-To:” field is set to the same value as the “To:” field, Mutt assumes +# that the “Reply-To:” field was set by the mailing list to automate responses to +# the list, and will ignore this field. To direct a response to the mailing list +# when this option is set, use the function; will +# reply to both the sender and the list. +# +set ignore_list_reply_to=yes + + +# 3.111. imap_authenticators +# +# Type: string +# Default: (empty) +# +# This is a colon-delimited list of authentication methods mutt may attempt to +# use to log in to an IMAP server, in the order mutt should try them. +# Authentication methods are either “login” or the right side of an IMAP “AUTH= +# xxx” capability string, e.g. “digest-md5”, “gssapi” or “cram-md5”. This option +# is case-insensitive. If it's unset (the default) mutt will try all available +# methods, in order from most-secure to least-secure. +# +# Example: +# +# set imap_authenticators="gssapi:cram-md5:login" +# +# Note: Mutt will only fall back to other authentication methods if the previous +# methods are unavailable. If a method is available but authentication fails, +# mutt will not connect to the IMAP server. +# + + +# 3.112. imap_check_subscribed +# +# Type: boolean +# Default: no +# +# When set, mutt will fetch the set of subscribed folders from your server on +# connection, and add them to the set of mailboxes it polls for new mail just as +# if you had issued individual “mailboxes” commands. +# + + +# 3.113. imap_delim_chars +# +# Type: string +# Default: “/.” +# +# This contains the list of characters which you would like to treat as folder +# separators for displaying IMAP paths. In particular it helps in using the “=” +# shortcut for your folder variable. +# + + +# 3.114. imap_headers +# +# Type: string +# Default: (empty) +# +# Mutt requests these header fields in addition to the default headers (“Date:”, +# “From:”, “Subject:”, “To:”, “Cc:”, “Message-Id:”, “References:”, “Content-Type: +# ”, “Content-Description:”, “In-Reply-To:”, “Reply-To:”, “Lines:”, “List-Post:”, +# “X-Label:”) from IMAP servers before displaying the index menu. You may want to +# add more headers for spam detection. +# +# Note: This is a space separated list, items should be uppercase and not contain +# the colon, e.g. “X-BOGOSITY X-SPAM-STATUS” for the “X-Bogosity:” and “ +# X-Spam-Status:” header fields. +# + + +# 3.115. imap_idle +# +# Type: boolean +# Default: no +# +# When set, mutt will attempt to use the IMAP IDLE extension to check for new +# mail in the current mailbox. Some servers (dovecot was the inspiration for this +# option) react badly to mutt's implementation. If your connection seems to +# freeze up periodically, try unsetting this. +# + + +# 3.116. imap_keepalive +# +# Type: number +# Default: 300 +# +# This variable specifies the maximum amount of time in seconds that mutt will +# wait before polling open IMAP connections, to prevent the server from closing +# them before mutt has finished with them. The default is well within the +# RFC-specified minimum amount of time (30 minutes) before a server is allowed to +# do this, but in practice the RFC does get violated every now and then. Reduce +# this number if you find yourself getting disconnected from your IMAP server due +# to inactivity. +# + + +# 3.117. imap_list_subscribed +# +# Type: boolean +# Default: no +# +# This variable configures whether IMAP folder browsing will look for only +# subscribed folders or all folders. This can be toggled in the IMAP browser with +# the function. +# + + +# 3.118. imap_login +# +# Type: string +# Default: (empty) +# +# Your login name on the IMAP server. +# +# This variable defaults to the value of $imap_user. +# + + +# 3.119. imap_oauth_refresh_command +# +# Type: string +# Default: (empty) +# +# The command to run to generate an OAUTH refresh token for authorizing your +# connection to your IMAP server. This command will be run on every connection +# attempt that uses the OAUTHBEARER authentication mechanism. +# + + +# 3.120. imap_pass +# +# Type: string +# Default: (empty) +# +# Specifies the password for your IMAP account. If unset, Mutt will prompt you +# for your password when you invoke the function or try to open +# an IMAP folder. +# +# Warning: you should only use this option when you are on a fairly secure +# machine, because the superuser can read your muttrc even if you are the only +# one who can read the file. +# + + +# 3.121. imap_passive +# +# Type: boolean +# Default: yes +# +# When set, mutt will not open new IMAP connections to check for new mail. Mutt +# will only check for new mail over existing IMAP connections. This is useful if +# you don't want to be prompted to user/password pairs on mutt invocation, or if +# opening the connection is slow. +# + + +# 3.122. imap_peek +# +# Type: boolean +# Default: yes +# +# When set, mutt will avoid implicitly marking your mail as read whenever you +# fetch a message from the server. This is generally a good thing, but can make +# closing an IMAP folder somewhat slower. This option exists to appease speed +# freaks. +# + + +# 3.123. imap_pipeline_depth +# +# Type: number +# Default: 15 +# +# Controls the number of IMAP commands that may be queued up before they are sent +# to the server. A deeper pipeline reduces the amount of time mutt must wait for +# the server, and can make IMAP servers feel much more responsive. But not all +# servers correctly handle pipelined commands, so if you have problems you might +# want to try setting this variable to 0. +# +# Note: Changes to this variable have no effect on open connections. +# + + +# 3.124. imap_poll_timeout +# +# Type: number +# Default: 15 +# +# This variable specifies the maximum amount of time in seconds that mutt will +# wait for a response when polling IMAP connections for new mail, before timing +# out and closing the connection. Set to 0 to disable timing out. +# + + +# 3.125. imap_servernoise +# +# Type: boolean +# Default: yes +# +# When set, mutt will display warning messages from the IMAP server as error +# messages. Since these messages are often harmless, or generated due to +# configuration problems on the server which are out of the users' hands, you may +# wish to suppress them at some point. +# + + +# 3.126. imap_user +# +# Type: string +# Default: (empty) +# +# The name of the user whose mail you intend to access on the IMAP server. +# +# This variable defaults to your user name on the local machine. +# + + +# 3.127. implicit_autoview +# +# Type: boolean +# Default: no +# +# If set to “yes”, mutt will look for a mailcap entry with the “copiousoutput” +# flag set for every MIME attachment it doesn't have an internal viewer defined +# for. If such an entry is found, mutt will use the viewer defined in that entry +# to convert the body part to text form. +# +set implicit_autoview=no + + +# 3.128. include +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether or not a copy of the message(s) you are replying to is +# included in your reply. +# +set include=yes + + +# 3.129. include_onlyfirst +# +# Type: boolean +# Default: no +# +# Controls whether or not Mutt includes only the first attachment of the message +# you are replying. +# + + +# 3.130. indent_string +# +# Type: string +# Default: “> ” +# +# Specifies the string to prepend to each line of text quoted in a message to +# which you are replying. You are strongly encouraged not to change this value, +# as it tends to agitate the more fanatical netizens. +# +# The value of this option is ignored if $text_flowed is set, because the quoting +# mechanism is strictly defined for format=flowed. +# +# This option is a format string, please see the description of $index_format for +# supported printf(3)-style sequences. +# + + +# 3.131. index_format +# +# Type: string +# Default: “%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s” +# +# This variable allows you to customize the message index display to your +# personal taste. +# +# “Format strings” are similar to the strings used in the C function printf(3) to +# format output (see the man page for more details). For an explanation of the %? +# construct, see the $status_format description. The following sequences are +# defined in Mutt: +# +# ┌─────┬───────────────────────────────────────────────────────────────────────┐ +# │%a │address of the author │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%A │reply-to address (if present; otherwise: address of author) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%b │filename of the original message folder (think mailbox) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%B │the list to which the letter was sent, or else the folder name (%b). │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%c │number of characters (bytes) in the message │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%C │current message number │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%d │date and time of the message in the format specified by $date_format │ +# │ │converted to sender's time zone │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%D │date and time of the message in the format specified by $date_format │ +# │ │converted to the local time zone │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%e │current message number in thread │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%E │number of messages in current thread │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%f │sender (address + real name), either From: or Return-Path: │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%F │author name, or recipient name if the message is from you │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%H │spam attribute(s) of this message │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%i │message-id of the current message │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%l │number of lines in the message (does not work with maildir, mh, and │ +# │ │possibly IMAP folders) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │ │If an address in the “To:” or “Cc:” header field matches an address │ +# │%L │defined by the users “subscribe” command, this displays "To │ +# │ │", otherwise the same as %F. │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%m │total number of message in the mailbox │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%M │number of hidden messages if the thread is collapsed. │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%N │message score │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%n │author's real name (or address if missing) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%O │original save folder where mutt would formerly have stashed the │ +# │ │message: list name or recipient name if not sent to a list │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%P │progress indicator for the built-in pager (how much of the file has │ +# │ │been displayed) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%r │comma separated list of “To:” recipients │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%R │comma separated list of “Cc:” recipients │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%s │subject of the message │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%S │single character status of the message (“N”/“O”/“D”/“d”/“!”/“r”/“*”) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%t │“To:” field (recipients) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%T │the appropriate character from the $to_chars string │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%u │user (login) name of the author │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%v │first name of the author, or the recipient if the message is from you │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%X │number of attachments (please see the “attachments” section for │ +# │ │possible speed effects) │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%y │“X-Label:” field, if present │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │ │“X-Label:” field, if present, and (1) not at part of a thread tree, (2)│ +# │%Y │at the top of a thread, or (3) “X-Label:” is different from preceding │ +# │ │message's “X-Label:”. │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │ │a three character set of message status flags. the first character is │ +# │%Z │new/read/replied flags (“n”/“o”/“r”/“O”/“N”). the second is deleted or │ +# │ │encryption flags (“D”/“d”/“S”/“P”/“s”/“K”). the third is either tagged/│ +# │ │flagged (“*”/“!”), or one of the characters listed in $to_chars. │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │% │the date and time of the message is converted to sender's time zone, │ +# │{fmt}│and “fmt” is expanded by the library function strftime(3); a leading │ +# │ │bang disables locales │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │% │the date and time of the message is converted to the local time zone, │ +# │[fmt]│and “fmt” is expanded by the library function strftime(3); a leading │ +# │ │bang disables locales │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │% │the local date and time when the message was received. “fmt” is │ +# │(fmt)│expanded by the library function strftime(3); a leading bang disables │ +# │ │locales │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │% │the current local time. “fmt” is expanded by the library function │ +# ││strftime(3); a leading bang disables locales. │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%>X │right justify the rest of the string and pad with character “X” │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%|X │pad to the end of the line with character “X” │ +# ├─────┼───────────────────────────────────────────────────────────────────────┤ +# │%*X │soft-fill with character “X” as pad │ +# └─────┴───────────────────────────────────────────────────────────────────────┘ +# +# “Soft-fill” deserves some explanation: Normal right-justification will print +# everything to the left of the “%>”, displaying padding and whatever lies to the +# right only if there's room. By contrast, soft-fill gives priority to the +# right-hand side, guaranteeing space to display it and showing padding only if +# there's still room. If necessary, soft-fill will eat text leftwards to make +# room for rightward text. +# +# Note that these expandos are supported in “save-hook”, “fcc-hook” and “ +# fcc-save-hook”, too. +# + + +# 3.132. ispell +# +# Type: path +# Default: “ispell” +# +# How to invoke ispell (GNU's spell-checking software). +# + + +# 3.133. keep_flagged +# +# Type: boolean +# Default: no +# +# If set, read messages marked as flagged will not be moved from your spool +# mailbox to your $mbox mailbox, or as a result of a “mbox-hook” command. +# + + +# 3.134. mail_check +# +# Type: number +# Default: 5 +# +# This variable configures how often (in seconds) mutt should look for new mail. +# Also see the $timeout variable. +# + + +# 3.135. mail_check_recent +# +# Type: boolean +# Default: yes +# +# When set, Mutt will only notify you about new mail that has been received since +# the last time you opened the mailbox. When unset, Mutt will notify you if any +# new mail exists in the mailbox, regardless of whether you have visited it +# recently. +# +# When $mark_old is set, Mutt does not consider the mailbox to contain new mail +# if only old messages exist. +# + + +# 3.136. mail_check_stats +# +# Type: boolean +# Default: no +# +# When set, mutt will periodically calculate message statistics of a mailbox +# while polling for new mail. It will check for unread, flagged, and total +# message counts. Because this operation is more performance intensive, it +# defaults to unset, and has a separate option, $mail_check_stats_interval, to +# control how often to update these counts. +# + + +# 3.137. mail_check_stats_interval +# +# Type: number +# Default: 60 +# +# When $mail_check_stats is set, this variable configures how often (in seconds) +# mutt will update message counts. +# + + +# 3.138. mailcap_path +# +# Type: string +# Default: (empty) +# +# This variable specifies which files to consult when attempting to display MIME +# bodies not directly supported by Mutt. +# +set mailcap_path="$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump" + + +# 3.139. mailcap_sanitize +# +# Type: boolean +# Default: yes +# +# If set, mutt will restrict possible characters in mailcap % expandos to a +# well-defined set of safe characters. This is the safe setting, but we are not +# sure it doesn't break some more advanced MIME stuff. +# +# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING! +# + + +# 3.140. maildir_header_cache_verify +# +# Type: boolean +# Default: yes +# +# Check for Maildir unaware programs other than mutt having modified maildir +# files when the header cache is in use. This incurs one stat(2) per message +# every time the folder is opened (which can be very slow for NFS folders). +# +set maildir_header_cache_verify=no + + +# 3.141. maildir_trash +# +# Type: boolean +# Default: no +# +# If set, messages marked as deleted will be saved with the maildir trashed flag +# instead of unlinked. Note: this only applies to maildir-style mailboxes. +# Setting it will have no effect on other mailbox types. +# + + +# 3.142. maildir_check_cur +# +# Type: boolean +# Default: no +# +# If set, mutt will poll both the new and cur directories of a maildir folder for +# new messages. This might be useful if other programs interacting with the +# folder (e.g. dovecot) are moving new messages to the cur directory. Note that +# setting this option may slow down polling for new messages in large folders, +# since mutt has to scan all cur messages. +# + + +# 3.143. mark_macro_prefix +# +# Type: string +# Default: “'” +# +# Prefix for macros created using mark-message. A new macro automatically +# generated with a will be composed from this prefix and the letter +# a. +# + + +# 3.144. mark_old +# +# Type: boolean +# Default: yes +# +# Controls whether or not mutt marks new unread messages as old if you exit a +# mailbox without reading them. With this option set, the next time you start +# mutt, the messages will show up with an “O” next to them in the index menu, +# indicating that they are old. +# +set mark_old=yes + + +# 3.145. markers +# +# Type: boolean +# Default: yes +# +# Controls the display of wrapped lines in the internal pager. If set, a “+” +# marker is displayed at the beginning of wrapped lines. +# +# Also see the $smart_wrap variable. +# +set markers=no + + +# 3.146. mask +# +# Type: regular expression +# Default: “!^.[^.]” +# +# A regular expression used in the file browser, optionally preceded by the not +# operator “!”. Only files whose names match this mask will be shown. The match +# is always case-sensitive. +# + + +# 3.147. mbox +# +# Type: path +# Default: “~/mbox” +# +# This specifies the folder into which read mail in your $spoolfile folder will +# be appended. +# +# Also see the $move variable. +# + + +# 3.148. mbox_type +# +# Type: folder magic +# Default: mbox +# +# The default mailbox type used when creating new folders. May be any of “mbox”, +# “MMDF”, “MH” and “Maildir”. This is overridden by the -m command-line option. +# +set mbox_type=Maildir + + +# 3.149. menu_context +# +# Type: number +# Default: 0 +# +# This variable controls the number of lines of context that are given when +# scrolling through menus. (Similar to $pager_context.) +# +set menu_context=2 + + +# 3.150. menu_move_off +# +# Type: boolean +# Default: yes +# +# When unset, the bottom entry of menus will never scroll up past the bottom of +# the screen, unless there are less entries than lines. When set, the bottom +# entry may move off the bottom. +# + + +# 3.151. menu_scroll +# +# Type: boolean +# Default: no +# +# When set, menus will be scrolled up or down one line when you attempt to move +# across a screen boundary. If unset, the screen is cleared and the next or +# previous page of the menu is displayed (useful for slow links to avoid many +# redraws). +# +set menu_scroll=yes + + +# 3.152. message_cache_clean +# +# Type: boolean +# Default: no +# +# If set, mutt will clean out obsolete entries from the message cache when the +# mailbox is synchronized. You probably only want to set it every once in a +# while, since it can be a little slow (especially for large folders). +# + + +# 3.153. message_cachedir +# +# Type: path +# Default: (empty) +# +# Set this to a directory and mutt will cache copies of messages from your IMAP +# and POP servers here. You are free to remove entries at any time. +# +# When setting this variable to a directory, mutt needs to fetch every remote +# message only once and can perform regular expression searches as fast as for +# local folders. +# +# Also see the $message_cache_clean variable. +# + + +# 3.154. message_format +# +# Type: string +# Default: “%s” +# +# This is the string displayed in the “attachment” menu for attachments of type +# message/rfc822. For a full listing of defined printf(3)-like sequences see the +# section on $index_format. +# + + +# 3.155. meta_key +# +# Type: boolean +# Default: no +# +# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if +# the user had pressed the Esc key and whatever key remains after having the high +# bit removed. For example, if the key pressed has an ASCII value of 0xf8, then +# this is treated as if the user had pressed Esc then “x”. This is because the +# result of removing the high bit from 0xf8 is 0x78, which is the ASCII character +# “x”. +# + + +# 3.156. metoo +# +# Type: boolean +# Default: no +# +# If unset, Mutt will remove your address (see the “alternates” command) from the +# list of recipients when replying to a message. +# + + +# 3.157. mh_purge +# +# Type: boolean +# Default: no +# +# When unset, mutt will mimic mh's behavior and rename deleted messages to , in mh folders instead of really deleting them. This leaves the +# message on disk but makes programs reading the folder ignore it. If the +# variable is set, the message files will simply be deleted. +# +# This option is similar to $maildir_trash for Maildir folders. +# + + +# 3.158. mh_seq_flagged +# +# Type: string +# Default: “flagged” +# +# The name of the MH sequence used for flagged messages. +# + + +# 3.159. mh_seq_replied +# +# Type: string +# Default: “replied” +# +# The name of the MH sequence used to tag replied messages. +# + + +# 3.160. mh_seq_unseen +# +# Type: string +# Default: “unseen” +# +# The name of the MH sequence used for unseen messages. +# + + +# 3.161. mime_forward +# +# Type: quadoption +# Default: no +# +# When set, the message you are forwarding will be attached as a separate message +# /rfc822 MIME part instead of included in the main body of the message. This is +# useful for forwarding MIME messages so the receiver can properly view the +# message as it was delivered to you. If you like to switch between MIME and not +# MIME from mail to mail, set this variable to “ask-no” or “ask-yes”. +# +# Also see $forward_decode and $mime_forward_decode. +# +set mime_forward=ask-yes + + +# 3.162. mime_forward_decode +# +# Type: boolean +# Default: no +# +# Controls the decoding of complex MIME messages into text/plain when forwarding +# a message while $mime_forward is set. Otherwise $forward_decode is used +# instead. +# + + +# 3.163. mime_forward_rest +# +# Type: quadoption +# Default: yes +# +# When forwarding multiple attachments of a MIME message from the attachment +# menu, attachments which cannot be decoded in a reasonable manner will be +# attached to the newly composed message if this option is set. +# + + +# 3.164. mime_type_query_command +# +# Type: string +# Default: (empty) +# +# This specifies a command to run, to determine the mime type of a new attachment +# when composing a message. Unless $mime_type_query_first is set, this will only +# be run if the attachment's extension is not found in the mime.types file. +# +# The string may contain a “%s”, which will be substituted with the attachment +# filename. Mutt will add quotes around the string substituted for “%s” +# automatically according to shell quoting rules, so you should avoid adding your +# own. If no “%s” is found in the string, Mutt will append the attachment +# filename to the end of the string. +# +# The command should output a single line containing the attachment's mime type. +# +# Suggested values are “xdg-mime query filetype” or “file -bi”. +# + + +# 3.165. mime_type_query_first +# +# Type: boolean +# Default: no +# +# When set, the $mime_type_query_command will be run before the mime.types +# lookup. +# + + +# 3.166. mix_entry_format +# +# Type: string +# Default: “%4n %c %-16s %a” +# +# This variable describes the format of a remailer line on the mixmaster chain +# selection screen. The following printf(3)-like sequences are supported: +# +# ┌──┬───────────────────────────────┐ +# │%n│The running number on the menu.│ +# ├──┼───────────────────────────────┤ +# │%c│Remailer capabilities. │ +# ├──┼───────────────────────────────┤ +# │%s│The remailer's short name. │ +# ├──┼───────────────────────────────┤ +# │%a│The remailer's e-mail address. │ +# └──┴───────────────────────────────┘ +# + + +# 3.167. mixmaster +# +# Type: path +# Default: “mixmaster” +# +# This variable contains the path to the Mixmaster binary on your system. It is +# used with various sets of parameters to gather the list of known remailers, and +# to finally send a message through the mixmaster chain. +# +set mixmaster="mixmaster-filter" + + +# 3.168. move +# +# Type: quadoption +# Default: no +# +# Controls whether or not Mutt will move read messages from your spool mailbox to +# your $mbox mailbox, or as a result of a “mbox-hook” command. +# +set move=no + + +# 3.169. narrow_tree +# +# Type: boolean +# Default: no +# +# This variable, when set, makes the thread tree narrower, allowing deeper +# threads to fit on the screen. +# +set narrow_tree=yes + + +# 3.170. net_inc +# +# Type: number +# Default: 10 +# +# Operations that expect to transfer a large amount of data over the network will +# update their progress every $net_inc kilobytes. If set to 0, no progress +# messages will be displayed. +# +# See also $read_inc, $write_inc and $net_inc. +# + + +# 3.171. new_mail_command +# +# Type: path +# Default: (empty) +# +# If set, Mutt will call this command after a new message is received. See the +# $status_format documentation for the values that can be formatted into this +# command. +# + + +# 3.172. pager +# +# Type: path +# Default: “builtin” +# +# This variable specifies which pager you would like to use to view messages. The +# value “builtin” means to use the built-in pager, otherwise this variable should +# specify the pathname of the external pager you would like to use. +# +# Using an external pager may have some disadvantages: Additional keystrokes are +# necessary because you can't call mutt functions directly from the pager, and +# screen resizes cause lines longer than the screen width to be badly formatted +# in the help menu. +# + + +# 3.173. pager_context +# +# Type: number +# Default: 0 +# +# This variable controls the number of lines of context that are given when +# displaying the next or previous page in the internal pager. By default, Mutt +# will display the line after the last one on the screen at the top of the next +# page (0 lines of context). +# +# This variable also specifies the amount of context given for search results. If +# positive, this many lines will be given before a match, if 0, the match will be +# top-aligned. +# +set pager_context=2 + + +# 3.174. pager_format +# +# Type: string +# Default: “-%Z- %C/%m: %-20.20n %s%* -- (%P)” +# +# This variable controls the format of the one-line message “status” displayed +# before each message in either the internal or an external pager. The valid +# sequences are listed in the $index_format section. +# +set pager_format="<%a> %* %i (%P)" + + +# 3.175. pager_index_lines +# +# Type: number +# Default: 0 +# +# Determines the number of lines of a mini-index which is shown when in the +# pager. The current message, unless near the top or bottom of the folder, will +# be roughly one third of the way down this mini-index, giving the reader the +# context of a few messages before and after the message. This is useful, for +# example, to determine how many messages remain to be read in the current +# thread. One of the lines is reserved for the status bar from the index, so a +# setting of 6 will only show 5 lines of the actual index. A value of 0 results +# in no index being shown. If the number of messages in the current folder is +# less than $pager_index_lines, then the index will only use as many lines as it +# needs. +# +set pager_index_lines=5 + + +# 3.176. pager_stop +# +# Type: boolean +# Default: no +# +# When set, the internal-pager will not move to the next message when you are at +# the end of a message and invoke the function. +# +set pager_stop=yes + + +# 3.177. pgp_auto_decode +# +# Type: boolean +# Default: no +# +# If set, mutt will automatically attempt to decrypt traditional PGP messages +# whenever the user performs an operation which ordinarily would result in the +# contents of the message being operated on. For example, if the user displays a +# pgp-traditional message which has not been manually checked with the +# function, mutt will automatically check the message for +# traditional pgp. +# +set pgp_auto_decode=yes + + +# 3.178. pgp_autoinline +# +# Type: boolean +# Default: no +# +# This option controls whether Mutt generates old-style inline (traditional) PGP +# encrypted or signed messages under certain circumstances. This can be +# overridden by use of the pgp menu, when inline is not required. The GPGME +# backend does not support this option. +# +# Note that Mutt might automatically use PGP/MIME for messages which consist of +# more than a single MIME part. Mutt can be configured to ask before sending PGP/ +# MIME messages when inline (traditional) would not work. +# +# Also see the $pgp_mime_auto variable. +# +# Also note that using the old-style PGP message format is strongly deprecated. +# (PGP only) +# + + +# 3.179. pgp_check_exit +# +# Type: boolean +# Default: yes +# +# If set, mutt will check the exit code of the PGP subprocess when signing or +# encrypting. A non-zero exit code means that the subprocess failed. (PGP only) +# + + +# 3.180. pgp_check_gpg_decrypt_status_fd +# +# Type: boolean +# Default: yes +# +# If set, mutt will check the status file descriptor output of +# $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes indicating +# successful decryption. This will check for the presence of DECRYPTION_OKAY, +# absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs between the +# BEGIN_DECRYPTION and END_DECRYPTION status codes. +# +# If unset, mutt will instead match the status fd output against +# $pgp_decryption_okay. (PGP only) +# + + +# 3.181. pgp_clearsign_command +# +# Type: string +# Default: (empty) +# +# This format is used to create an old-style “clearsigned” PGP message. Note that +# the use of this format is strongly deprecated. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.182. pgp_decode_command +# +# Type: string +# Default: (empty) +# +# This format strings specifies a command which is used to decode application/pgp +# attachments. +# +# The PGP command formats have their own set of printf(3)-like sequences: +# +# ┌──┬──────────────────────────────────────────────────────────────────────────┐ +# │%p│Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string │ +# │ │otherwise. Note: This may be used with a %? construct. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%f│Expands to the name of a file containing a message. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%s│Expands to the name of a file containing the signature part of a multipart│ +# │ │/signed attachment when verifying it. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%a│The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.│ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%r│One or more key IDs (or fingerprints if available). │ +# └──┴──────────────────────────────────────────────────────────────────────────┘ +# +# For examples on how to configure these formats for the various versions of PGP +# which are floating around, see the pgp and gpg sample configuration files in +# the samples/ subdirectory which has been installed on your system alongside the +# documentation. (PGP only) +# + + +# 3.183. pgp_decrypt_command +# +# Type: string +# Default: (empty) +# +# This command is used to decrypt a PGP encrypted message. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.184. pgp_decryption_okay +# +# Type: regular expression +# Default: (empty) +# +# If you assign text to this variable, then an encrypted PGP message is only +# considered successfully decrypted if the output from $pgp_decrypt_command +# contains the text. This is used to protect against a spoofed encrypted message, +# with multipart/encrypted headers but containing a block that is not actually +# encrypted. (e.g. simply signed and ascii armored text). +# +# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored. +# (PGP only) +# + + +# 3.185. pgp_default_key +# +# Type: string +# Default: (empty) +# +# This is the default key-pair to use for PGP operations. It will be used for +# encryption (see $postpone_encrypt and $pgp_self_encrypt). +# +# It will also be used for signing unless $pgp_sign_as is set. +# +# The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and +# should no longer be used. (PGP only) +# + + +# 3.186. pgp_encrypt_only_command +# +# Type: string +# Default: (empty) +# +# This command is used to encrypt a body part without signing it. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.187. pgp_encrypt_sign_command +# +# Type: string +# Default: (empty) +# +# This command is used to both sign and encrypt a body part. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.188. pgp_entry_format +# +# Type: string +# Default: “%4n %t%f %4l/0x%k %-4a %2c %u” +# +# This variable allows you to customize the PGP key selection menu to your +# personal taste. This string is similar to $index_format, but has its own set of +# printf(3)-like sequences: +# +# ┌──────┬──────────────────────────────────────────────────────┐ +# │%n │number │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%k │key id │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%u │user id │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%a │algorithm │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%l │key length │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%f │flags │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%c │capabilities │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%t │trust/validity of the key-uid association │ +# ├──────┼──────────────────────────────────────────────────────┤ +# │%[]│date of the key where is an strftime(3) expression│ +# └──────┴──────────────────────────────────────────────────────┘ +# +# (PGP only) +# + + +# 3.189. pgp_export_command +# +# Type: string +# Default: (empty) +# +# This command is used to export a public key from the user's key ring. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.190. pgp_getkeys_command +# +# Type: string +# Default: (empty) +# +# This command is invoked whenever Mutt needs to fetch the public key associated +# with an email address. Of the sequences supported by $pgp_decode_command, %r is +# the only printf(3)-like sequence used with this format. Note that in this case, +# %r expands to the email address, not the public key ID (the key ID is unknown, +# which is why Mutt is invoking this command). (PGP only) +# + + +# 3.191. pgp_good_sign +# +# Type: regular expression +# Default: (empty) +# +# If you assign a text to this variable, then a PGP signature is only considered +# verified if the output from $pgp_verify_command contains the text. Use this +# variable if the exit code from the command is 0 even for bad signatures. (PGP +# only) +# + + +# 3.192. pgp_ignore_subkeys +# +# Type: boolean +# Default: yes +# +# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the +# principal key will inherit the subkeys' capabilities. Unset this if you want to +# play interesting key selection games. (PGP only) +# + + +# 3.193. pgp_import_command +# +# Type: string +# Default: (empty) +# +# This command is used to import a key from a message into the user's public key +# ring. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.194. pgp_list_pubring_command +# +# Type: string +# Default: (empty) +# +# This command is used to list the public key ring's contents. The output format +# must be analogous to the one used by +# +# gpg --list-keys --with-colons --with-fingerprint +# +# This format is also generated by the pgpring utility which comes with mutt. +# +# Note: gpg's fixed-list-mode option should not be used. It produces a different +# date format which may result in mutt showing incorrect key generation dates. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.195. pgp_list_secring_command +# +# Type: string +# Default: (empty) +# +# This command is used to list the secret key ring's contents. The output format +# must be analogous to the one used by: +# +# gpg --list-keys --with-colons --with-fingerprint +# +# This format is also generated by the pgpring utility which comes with mutt. +# +# Note: gpg's fixed-list-mode option should not be used. It produces a different +# date format which may result in mutt showing incorrect key generation dates. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.196. pgp_long_ids +# +# Type: boolean +# Default: yes +# +# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE: +# Internally, Mutt has transitioned to using fingerprints (or long key IDs as a +# fallback). This option now only controls the display of key IDs in the key +# selection menu and a few other places. (PGP only) +# + + +# 3.197. pgp_mime_auto +# +# Type: quadoption +# Default: ask-yes +# +# This option controls whether Mutt will prompt you for automatically sending a +# (signed/encrypted) message using PGP/MIME when inline (traditional) fails (for +# any reason). +# +# Also note that using the old-style PGP message format is strongly deprecated. +# (PGP only) +# + + +# 3.198. pgp_replyinline +# +# Type: boolean +# Default: no +# +# Setting this variable will cause Mutt to always attempt to create an inline +# (traditional) message when replying to a message which is PGP encrypted/signed +# inline. This can be overridden by use of the pgp menu, when inline is not +# required. This option does not automatically detect if the (replied-to) message +# is inline; instead it relies on Mutt internals for previously checked/flagged +# messages. +# +# Note that Mutt might automatically use PGP/MIME for messages which consist of +# more than a single MIME part. Mutt can be configured to ask before sending PGP/ +# MIME messages when inline (traditional) would not work. +# +# Also see the $pgp_mime_auto variable. +# +# Also note that using the old-style PGP message format is strongly deprecated. +# (PGP only) +# + + +# 3.199. pgp_retainable_sigs +# +# Type: boolean +# Default: no +# +# If set, signed and encrypted messages will consist of nested multipart/signed +# and multipart/encrypted body parts. +# +# This is useful for applications like encrypted and signed mailing lists, where +# the outer layer (multipart/encrypted) can be easily removed, while the inner +# multipart/signed part is retained. (PGP only) +# +set pgp_retainable_sigs=yes + + +# 3.200. pgp_self_encrypt +# +# Type: boolean +# Default: yes +# +# When set, PGP encrypted messages will also be encrypted using the key in +# $pgp_default_key. (PGP only) +# + + +# 3.201. pgp_show_unusable +# +# Type: boolean +# Default: yes +# +# If set, mutt will display non-usable keys on the PGP key selection menu. This +# includes keys which have been revoked, have expired, or have been marked as “ +# disabled” by the user. (PGP only) +# +set pgp_show_unusable=no + + +# 3.202. pgp_sign_as +# +# Type: string +# Default: (empty) +# +# If you have a different key pair to use for signing, you should set this to the +# signing key. Most people will only need to set $pgp_default_key. It is +# recommended that you use the keyid form to specify your key (e.g. 0x00112233). +# (PGP only) +# +set pgp_sign_as="0x9C9D6979AE941637" + + +# 3.203. pgp_sign_command +# +# Type: string +# Default: (empty) +# +# This command is used to create the detached PGP signature for a multipart/ +# signed PGP/MIME body part. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.204. pgp_sort_keys +# +# Type: sort order +# Default: address +# +# Specifies how the entries in the pgp menu are sorted. The following are legal +# values: +# +# ┌───────┬──────────────────────────────┐ +# │address│sort alphabetically by user id│ +# ├───────┼──────────────────────────────┤ +# │keyid │sort alphabetically by key id │ +# ├───────┼──────────────────────────────┤ +# │date │sort by key creation date │ +# ├───────┼──────────────────────────────┤ +# │trust │sort by the trust of the key │ +# └───────┴──────────────────────────────┘ +# +# If you prefer reverse order of the above values, prefix it with “reverse-”. +# (PGP only) +# + + +# 3.205. pgp_strict_enc +# +# Type: boolean +# Default: yes +# +# If set, Mutt will automatically encode PGP/MIME signed messages as +# quoted-printable. Please note that unsetting this variable may lead to problems +# with non-verifyable PGP signatures, so only change this if you know what you +# are doing. (PGP only) +# + + +# 3.206. pgp_timeout +# +# Type: number +# Default: 300 +# +# The number of seconds after which a cached passphrase will expire if not used. +# (PGP only) +# + + +# 3.207. pgp_use_gpg_agent +# +# Type: boolean +# Default: no +# +# If set, mutt will use a possibly-running gpg-agent(1) process. Note that as of +# version 2.1, GnuPG no longer exports GPG_AGENT_INFO, so mutt no longer verifies +# if the agent is running. (PGP only) +# +set pgp_use_gpg_agent=yes + + +# 3.208. pgp_verify_command +# +# Type: string +# Default: (empty) +# +# This command is used to verify PGP signatures. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.209. pgp_verify_key_command +# +# Type: string +# Default: (empty) +# +# This command is used to verify key information from the key selection menu. +# +# This is a format string, see the $pgp_decode_command command for possible +# printf(3)-like sequences. (PGP only) +# + + +# 3.210. pipe_decode +# +# Type: boolean +# Default: no +# +# Used in connection with the command. When unset, Mutt will pipe +# the messages without any preprocessing. When set, Mutt will weed headers and +# will attempt to decode the messages first. +# + + +# 3.211. pipe_sep +# +# Type: string +# Default: “n” +# +# The separator to add between messages when piping a list of tagged messages to +# an external Unix command. +# + + +# 3.212. pipe_split +# +# Type: boolean +# Default: no +# +# Used in connection with the function following . If +# this variable is unset, when piping a list of tagged messages Mutt will +# concatenate the messages and will pipe them all concatenated. When set, Mutt +# will pipe the messages one by one. In both cases the messages are piped in the +# current sorted order, and the $pipe_sep separator is added after each message. +# + + +# 3.213. pop_auth_try_all +# +# Type: boolean +# Default: yes +# +# If set, Mutt will try all available authentication methods. When unset, Mutt +# will only fall back to other authentication methods if the previous methods are +# unavailable. If a method is available but authentication fails, Mutt will not +# connect to the POP server. +# + + +# 3.214. pop_authenticators +# +# Type: string +# Default: (empty) +# +# This is a colon-delimited list of authentication methods mutt may attempt to +# use to log in to an POP server, in the order mutt should try them. +# Authentication methods are either “user”, “apop” or any SASL mechanism, e.g. “ +# digest-md5”, “gssapi” or “cram-md5”. This option is case-insensitive. If this +# option is unset (the default) mutt will try all available methods, in order +# from most-secure to least-secure. +# +# Example: +# +# set pop_authenticators="digest-md5:apop:user" +# + + +# 3.215. pop_checkinterval +# +# Type: number +# Default: 60 +# +# This variable configures how often (in seconds) mutt should look for new mail +# in the currently selected mailbox if it is a POP mailbox. +# + + +# 3.216. pop_delete +# +# Type: quadoption +# Default: ask-no +# +# If set, Mutt will delete successfully downloaded messages from the POP server +# when using the function. When unset, Mutt will download messages +# but also leave them on the POP server. +# + + +# 3.217. pop_host +# +# Type: string +# Default: (empty) +# +# The name of your POP server for the function. You can also specify +# an alternative port, username and password, i.e.: +# +# [pop[s]://][username[:password]@]popserver[:port] +# +# where “[...]” denotes an optional part. +# + + +# 3.218. pop_last +# +# Type: boolean +# Default: no +# +# If this variable is set, mutt will try to use the “LAST” POP command for +# retrieving only unread messages from the POP server when using the +# function. +# + + +# 3.219. pop_oauth_refresh_command +# +# Type: string +# Default: (empty) +# +# The command to run to generate an OAUTH refresh token for authorizing your +# connection to your POP server. This command will be run on every connection +# attempt that uses the OAUTHBEARER authentication mechanism. +# + + +# 3.220. pop_pass +# +# Type: string +# Default: (empty) +# +# Specifies the password for your POP account. If unset, Mutt will prompt you for +# your password when you open a POP mailbox. +# +# Warning: you should only use this option when you are on a fairly secure +# machine, because the superuser can read your muttrc even if you are the only +# one who can read the file. +# + + +# 3.221. pop_reconnect +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether or not Mutt will try to reconnect to the POP server if the +# connection is lost. +# + + +# 3.222. pop_user +# +# Type: string +# Default: (empty) +# +# Your login name on the POP server. +# +# This variable defaults to your user name on the local machine. +# + + +# 3.223. post_indent_string +# +# Type: string +# Default: (empty) +# +# Similar to the $attribution variable, Mutt will append this string after the +# inclusion of a message which is being replied to. +# + + +# 3.224. postpone +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether or not messages are saved in the $postponed mailbox when you +# elect not to send immediately. +# +# Also see the $recall variable. +# + + +# 3.225. postponed +# +# Type: path +# Default: “~/postponed” +# +# Mutt allows you to indefinitely “postpone sending a message” which you are +# editing. When you choose to postpone a message, Mutt saves it in the mailbox +# specified by this variable. +# +# Also see the $postpone variable. +# +set postponed="=drafts" + + +# 3.226. postpone_encrypt +# +# Type: boolean +# Default: no +# +# When set, postponed messages that are marked for encryption will be +# self-encrypted. Mutt will first try to encrypt using the value specified in +# $pgp_default_key or $smime_default_key. If those are not set, it will try the +# deprecated $postpone_encrypt_as. (Crypto only) +# + + +# 3.227. postpone_encrypt_as +# +# Type: string +# Default: (empty) +# +# This is a deprecated fall-back variable for $postpone_encrypt. Please use +# $pgp_default_key or $smime_default_key. (Crypto only) +# + + +# 3.228. preconnect +# +# Type: string +# Default: (empty) +# +# If set, a shell command to be executed if mutt fails to establish a connection +# to the server. This is useful for setting up secure connections, e.g. with ssh +# (1). If the command returns a nonzero status, mutt gives up opening the server. +# Example: +# +# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 < /dev/null > /dev/null" +# +# Mailbox “foo” on “mailhost.net” can now be reached as “{localhost:1234}foo”. +# +# Note: For this example to work, you must be able to log in to the remote +# machine without having to enter a password. +# + + +# 3.229. print +# +# Type: quadoption +# Default: ask-no +# +# Controls whether or not Mutt really prints messages. This is set to “ask-no” by +# default, because some people accidentally hit “p” often. +# + + +# 3.230. print_command +# +# Type: path +# Default: “lpr” +# +# This specifies the command pipe that should be used to print messages. +# +set print_command="muttprint" + + +# 3.231. print_decode +# +# Type: boolean +# Default: yes +# +# Used in connection with the command. If this option is set, the +# message is decoded before it is passed to the external command specified by +# $print_command. If this option is unset, no processing will be applied to the +# message when printing it. The latter setting may be useful if you are using +# some advanced printer filter which is able to properly format e-mail messages +# for printing. +# + + +# 3.232. print_split +# +# Type: boolean +# Default: no +# +# Used in connection with the command. If this option is set, the +# command specified by $print_command is executed once for each message which is +# to be printed. If this option is unset, the command specified by $print_command +# is executed only once, and all the messages are concatenated, with a form feed +# as the message separator. +# +# Those who use the enscript(1) program's mail-printing mode will most likely +# want to set this option. +# +set print_split=yes + + +# 3.233. prompt_after +# +# Type: boolean +# Default: yes +# +# If you use an external $pager, setting this variable will cause Mutt to prompt +# you for a command when the pager exits rather than returning to the index menu. +# If unset, Mutt will return to the index menu when the external pager exits. +# + + +# 3.234. query_command +# +# Type: path +# Default: (empty) +# +# This specifies the command Mutt will use to make external address queries. The +# string may contain a “%s”, which will be substituted with the query string the +# user types. Mutt will add quotes around the string substituted for “%s” +# automatically according to shell quoting rules, so you should avoid adding your +# own. If no “%s” is found in the string, Mutt will append the user's query to +# the end of the string. See “query” for more information. +# +set query_command="lbdbq" + + +# 3.235. query_format +# +# Type: string +# Default: “%4c %t %-25.25a %-25.25n %?e?(%e)?” +# +# This variable describes the format of the “query” menu. The following printf(3) +# -style sequences are understood: +# +# ┌───┬─────────────────────────────────────────────────────┐ +# │%a │destination address │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%c │current entry number │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%e │extra information * │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%n │destination name │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%t │“*” if current entry is tagged, a space otherwise │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%>X│right justify the rest of the string and pad with “X”│ +# ├───┼─────────────────────────────────────────────────────┤ +# │%|X│pad to the end of the line with “X” │ +# ├───┼─────────────────────────────────────────────────────┤ +# │%*X│soft-fill with character “X” as pad │ +# └───┴─────────────────────────────────────────────────────┘ +# +# For an explanation of “soft-fill”, see the $index_format documentation. +# +# * = can be optionally printed if nonzero, see the $status_format documentation. +# + + +# 3.236. quit +# +# Type: quadoption +# Default: yes +# +# This variable controls whether “quit” and “exit” actually quit from mutt. If +# this option is set, they do quit, if it is unset, they have no effect, and if +# it is set to ask-yes or ask-no, you are prompted for confirmation when you try +# to quit. +# + + +# 3.237. quote_regexp +# +# Type: regular expression +# Default: “^([ t]*[|>:}#])+” +# +# A regular expression used in the internal pager to determine quoted sections of +# text in the body of a message. Quoted text may be filtered out using the +# command, or colored according to the “color quoted” family of +# directives. +# +# Higher levels of quoting may be colored differently (“color quoted1”, “color +# quoted2”, etc.). The quoting level is determined by removing the last character +# from the matched text and recursively reapplying the regular expression until +# it fails to produce a match. +# +# Match detection may be overridden by the $smileys regular expression. +# + + +# 3.238. read_inc +# +# Type: number +# Default: 10 +# +# If set to a value greater than 0, Mutt will display which message it is +# currently on when reading a mailbox or when performing search actions such as +# search and limit. The message is printed after this many messages have been +# read or searched (e.g., if set to 25, Mutt will print a message when it is at +# message 25, and then again when it gets to message 50). This variable is meant +# to indicate progress when reading or searching large mailboxes which may take +# some time. When set to 0, only a single message will appear before the reading +# the mailbox. +# +# Also see the $write_inc, $net_inc and $time_inc variables and the “tuning” +# section of the manual for performance considerations. +# + + +# 3.239. read_only +# +# Type: boolean +# Default: no +# +# If set, all folders are opened in read-only mode. +# + + +# 3.240. realname +# +# Type: string +# Default: (empty) +# +# This variable specifies what “real” or “personal” name should be used when +# sending messages. +# +# By default, this is the GECOS field from /etc/passwd. Note that this variable +# will not be used when the user has set a real name in the $from variable. +# + + +# 3.241. recall +# +# Type: quadoption +# Default: ask-yes +# +# Controls whether or not Mutt recalls postponed messages when composing a new +# message. +# +# Setting this variable to yes is not generally useful, and thus not recommended. +# Note that the function can be used to manually recall +# postponed messages. +# +# Also see $postponed variable. +# +set recall=no + + +# 3.242. record +# +# Type: path +# Default: “~/sent” +# +# This specifies the file into which your outgoing messages should be appended. +# (This is meant as the primary method for saving a copy of your messages, but +# another way to do this is using the “my_hdr” command to create a “Bcc:” field +# with your email address in it.) +# +# The value of $record is overridden by the $force_name and $save_name variables, +# and the “fcc-hook” command. +# +set record="=store" + + +# 3.243. reflow_space_quotes +# +# Type: boolean +# Default: yes +# +# This option controls how quotes from format=flowed messages are displayed in +# the pager and when replying (with $text_flowed unset). When set, this option +# adds spaces after each level of quote marks, turning ">>>foo" into "> > > foo". +# +# Note: If $reflow_text is unset, this option has no effect. Also, this option +# does not affect replies when $text_flowed is set. +# + + +# 3.244. reflow_text +# +# Type: boolean +# Default: yes +# +# When set, Mutt will reformat paragraphs in text/plain parts marked format= +# flowed. If unset, Mutt will display paragraphs unaltered from how they appear +# in the message body. See RFC3676 for details on the format=flowed format. +# +# Also see $reflow_wrap, and $wrap. +# + + +# 3.245. reflow_wrap +# +# Type: number +# Default: 78 +# +# This variable controls the maximum paragraph width when reformatting text/plain +# parts when $reflow_text is set. When the value is 0, paragraphs will be wrapped +# at the terminal's right margin. A positive value sets the paragraph width +# relative to the left margin. A negative value set the paragraph width relative +# to the right margin. +# +# Also see $wrap. +# + + +# 3.246. reply_regexp +# +# Type: regular expression +# Default: “^(re([[0-9]+])*|aw):[ t]*” +# +# A regular expression used to recognize reply messages when threading and +# replying. The default value corresponds to the English "Re:" and the German +# "Aw:". +# +set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+" + + +# 3.247. reply_self +# +# Type: boolean +# Default: no +# +# If unset and you are replying to a message sent by you, Mutt will assume that +# you want to reply to the recipients of that message rather than to yourself. +# +# Also see the “alternates” command. +# + + +# 3.248. reply_to +# +# Type: quadoption +# Default: ask-yes +# +# If set, when replying to a message, Mutt will use the address listed in the +# Reply-to: header as the recipient of the reply. If unset, it will use the +# address in the From: header field instead. This option is useful for reading a +# mailing list that sets the Reply-To: header field to the list address and you +# want to send a private message to the author of a message. +# + + +# 3.249. resolve +# +# Type: boolean +# Default: yes +# +# When set, the cursor will be automatically advanced to the next (possibly +# undeleted) message whenever a command that modifies the current message is +# executed. +# + + +# 3.250. resume_draft_files +# +# Type: boolean +# Default: no +# +# If set, draft files (specified by -H on the command line) are processed +# similarly to when resuming a postponed message. Recipients are not prompted +# for; send-hooks are not evaluated; no alias expansion takes place; user-defined +# headers and signatures are not added to the message. +# + + +# 3.251. resume_edited_draft_files +# +# Type: boolean +# Default: yes +# +# If set, draft files previously edited (via -E -H on the command line) will have +# $resume_draft_files automatically set when they are used as a draft file again. +# +# The first time a draft file is saved, mutt will add a header, +# X-Mutt-Resume-Draft to the saved file. The next time the draft file is read in, +# if mutt sees the header, it will set $resume_draft_files. +# +# This option is designed to prevent multiple signatures, user-defined headers, +# and other processing effects from being made multiple times to the draft file. +# + + +# 3.252. reverse_alias +# +# Type: boolean +# Default: no +# +# This variable controls whether or not Mutt will display the “personal” name +# from your aliases in the index menu if it finds an alias that matches the +# message's sender. For example, if you have the following alias: +# +# alias juser abd30425@somewhere.net (Joe User) +# +# and then you receive mail which contains the following header: +# +# From: abd30425@somewhere.net +# +# It would be displayed in the index menu as “Joe User” instead of “ +# abd30425@somewhere.net.” This is useful when the person's e-mail address is not +# human friendly. +# + + +# 3.253. reverse_name +# +# Type: boolean +# Default: no +# +# It may sometimes arrive that you receive mail to a certain machine, move the +# messages to another machine, and reply to some the messages from there. If this +# variable is set, the default From: line of the reply messages is built using +# the address where you received the messages you are replying to if that address +# matches your “alternates”. If the variable is unset, or the address that would +# be used doesn't match your “alternates”, the From: line will use your address +# on the current machine. +# +# Also see the “alternates” command. +# +set reverse_name=yes + + +# 3.254. reverse_realname +# +# Type: boolean +# Default: yes +# +# This variable fine-tunes the behavior of the $reverse_name feature. When it is +# set, mutt will use the address from incoming messages as-is, possibly including +# eventual real names. When it is unset, mutt will override any such real names +# with the setting of the $realname variable. +# + + +# 3.255. rfc2047_parameters +# +# Type: boolean +# Default: no +# +# When this variable is set, Mutt will decode RFC2047-encoded MIME parameters. +# You want to set this variable when mutt suggests you to save attachments to +# files named like: +# +# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= +# +# When this variable is set interactively, the change won't be active until you +# change folders. +# +# Note that this use of RFC2047's encoding is explicitly prohibited by the +# standard, but nevertheless encountered in the wild. +# +# Also note that setting this parameter will not have the effect that mutt +# generates this kind of encoding. Instead, mutt will unconditionally use the +# encoding specified in RFC2231. +# +set rfc2047_parameters=yes + + +# 3.256. save_address +# +# Type: boolean +# Default: no +# +# If set, mutt will take the sender's full address when choosing a default folder +# for saving a mail. If $save_name or $force_name is set too, the selection of +# the Fcc folder will be changed as well. +# + + +# 3.257. save_empty +# +# Type: boolean +# Default: yes +# +# When unset, mailboxes which contain no saved messages will be removed when +# closed (the exception is $spoolfile which is never removed). If set, mailboxes +# are never removed. +# +# Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and +# Maildir directories. +# + + +# 3.258. save_history +# +# Type: number +# Default: 0 +# +# This variable controls the size of the history (per category) saved in the +# $history_file file. +# +set save_history=100 + + +# 3.259. save_name +# +# Type: boolean +# Default: no +# +# This variable controls how copies of outgoing messages are saved. When set, a +# check is made to see if a mailbox specified by the recipient address exists +# (this is done by searching for a mailbox in the $folder directory with the +# username part of the recipient address). If the mailbox exists, the outgoing +# message will be saved to that mailbox, otherwise the message is saved to the +# $record mailbox. +# +# Also see the $force_name variable. +# + + +# 3.260. score +# +# Type: boolean +# Default: yes +# +# When this variable is unset, scoring is turned off. This can be useful to +# selectively disable scoring for certain folders when the +# $score_threshold_delete variable and related are used. +# + + +# 3.261. score_threshold_delete +# +# Type: number +# Default: -1 +# +# Messages which have been assigned a score equal to or lower than the value of +# this variable are automatically marked for deletion by mutt. Since mutt scores +# are always greater than or equal to zero, the default setting of this variable +# will never mark a message for deletion. +# + + +# 3.262. score_threshold_flag +# +# Type: number +# Default: 9999 +# +# Messages which have been assigned a score greater than or equal to this +# variable's value are automatically marked "flagged". +# + + +# 3.263. score_threshold_read +# +# Type: number +# Default: -1 +# +# Messages which have been assigned a score equal to or lower than the value of +# this variable are automatically marked as read by mutt. Since mutt scores are +# always greater than or equal to zero, the default setting of this variable will +# never mark a message read. +# + + +# 3.264. search_context +# +# Type: number +# Default: 0 +# +# For the pager, this variable specifies the number of lines shown before search +# results. By default, search results will be top-aligned. +# +set search_context=5 + + +# 3.265. send_charset +# +# Type: string +# Default: “us-ascii:iso-8859-1:utf-8” +# +# A colon-delimited list of character sets for outgoing messages. Mutt will use +# the first character set into which the text can be converted exactly. If your +# $charset is not “iso-8859-1” and recipients may not understand “UTF-8”, it is +# advisable to include in the list an appropriate widely used standard character +# set (such as “iso-8859-2”, “koi8-r” or “iso-2022-jp”) either instead of or +# after “iso-8859-1”. +# +# In case the text cannot be converted into one of these exactly, mutt uses +# $charset as a fallback. +# + + +# 3.266. sendmail +# +# Type: path +# Default: “/usr/sbin/sendmail -oem -oi” +# +# Specifies the program and arguments used to deliver mail sent by Mutt. Mutt +# expects that the specified program interprets additional arguments as recipient +# addresses. Mutt appends all recipients after adding a -- delimiter (if not +# already present). Additional flags, such as for $use_8bitmime, +# $use_envelope_from, $dsn_notify, or $dsn_return will be added before the +# delimiter. +# +set sendmail="$my_confdir/sendmail" + + +# 3.267. sendmail_wait +# +# Type: number +# Default: 0 +# +# Specifies the number of seconds to wait for the $sendmail process to finish +# before giving up and putting delivery in the background. +# +# Mutt interprets the value of this variable as follows: +# +# ┌──┬──────────────────────────────────────────────────────────────────┐ +# │>0│number of seconds to wait for sendmail to finish before continuing│ +# ├──┼──────────────────────────────────────────────────────────────────┤ +# │0 │wait forever for sendmail to finish │ +# ├──┼──────────────────────────────────────────────────────────────────┤ +# │<0│always put sendmail in the background without waiting │ +# └──┴──────────────────────────────────────────────────────────────────┘ +# +# Note that if you specify a value other than 0, the output of the child process +# will be put in a temporary file. If there is some error, you will be informed +# as to where to find the output. +# + + +# 3.268. shell +# +# Type: path +# Default: (empty) +# +# Command to use when spawning a subshell. By default, the user's login shell +# from /etc/passwd is used. +# + + +# 3.269. sidebar_delim_chars +# +# Type: string +# Default: “/.” +# +# This contains the list of characters which you would like to treat as folder +# separators for displaying paths in the sidebar. +# +# Local mail is often arranged in directories: `dir1/dir2/mailbox'. +# +# set sidebar_delim_chars='/' +# +# IMAP mailboxes are often named: `folder1.folder2.mailbox'. +# +# set sidebar_delim_chars='.' +# +# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string. +# + + +# 3.270. sidebar_divider_char +# +# Type: string +# Default: “|” +# +# This specifies the characters to be drawn between the sidebar (when visible) +# and the other Mutt panels. ASCII and Unicode line-drawing characters are +# supported. +# +set sidebar_divider_char=" " + + +# 3.271. sidebar_folder_indent +# +# Type: boolean +# Default: no +# +# Set this to indent mailboxes in the sidebar. +# +# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars. +# +set sidebar_folder_indent=yes + + +# 3.272. sidebar_format +# +# Type: string +# Default: “%B%* %n” +# +# This variable allows you to customize the sidebar display. This string is +# similar to $index_format, but has its own set of printf(3)-like sequences: +# +# ┌───┬─────────────────────────────────────────────────────────────────────────┐ +# │%B │Name of the mailbox │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%S │* Size of mailbox (total number of messages) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%N │* Number of unread messages in the mailbox │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%n │N if mailbox has new mail, blank otherwise │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%F │* Number of Flagged messages in the mailbox │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%! │“!” : one flagged message; “!!” : two flagged messages; “n!” : n flagged │ +# │ │messages (for n > 2). Otherwise prints nothing. │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%d │* @ Number of deleted messages │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%L │* @ Number of messages after limiting │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%t │* @ Number of tagged messages │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%>X│right justify the rest of the string and pad with “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%|X│pad to the end of the line with “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%*X│soft-fill with character “X” as pad │ +# └───┴─────────────────────────────────────────────────────────────────────────┘ +# +# * = Can be optionally printed if nonzero @ = Only applicable to the current +# folder +# +# In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus +# set, a suggested value for this option is "%B%?F? [%F]?%* %?N?%N/?%S". +# +set sidebar_format="%B%?F? [%F]?%* %?N?%N/?%S" + + +# 3.273. sidebar_indent_string +# +# Type: string +# Default: “ ” +# +# This specifies the string that is used to indent mailboxes in the sidebar. It +# defaults to two spaces. +# +# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars. +# +set sidebar_indent_string=" " + + +# 3.274. sidebar_new_mail_only +# +# Type: boolean +# Default: no +# +# When set, the sidebar will only display mailboxes containing new, or flagged, +# mail. +# +# See also: sidebar_whitelist. +# + + +# 3.275. sidebar_next_new_wrap +# +# Type: boolean +# Default: no +# +# When set, the command will not stop and the end of the list +# of mailboxes, but wrap around to the beginning. The command +# is similarly affected, wrapping around to the end of the list. +# + + +# 3.276. sidebar_short_path +# +# Type: boolean +# Default: no +# +# By default the sidebar will show the mailbox's path, relative to the $folder +# variable. Setting sidebar_shortpath=yes will shorten the names relative to the +# previous name. Here's an example: +# +# ┌────────────┬─────────────┬───────────────────────────────────────────────┐ +# │shortpath=no│shortpath=yes│shortpath=yes, folderindent=yes, indentstr=".."│ +# ├────────────┼─────────────┼───────────────────────────────────────────────┤ +# │fruit │fruit │fruit │ +# ├────────────┼─────────────┼───────────────────────────────────────────────┤ +# │fruit.apple │apple │..apple │ +# ├────────────┼─────────────┼───────────────────────────────────────────────┤ +# │fruit.banana│banana │..banana │ +# ├────────────┼─────────────┼───────────────────────────────────────────────┤ +# │fruit.cherry│cherry │..cherry │ +# └────────────┴─────────────┴───────────────────────────────────────────────┘ +# +# See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string. +# +set sidebar_short_path=yes + + +# 3.277. sidebar_sort_method +# +# Type: sort order +# Default: order +# +# Specifies how to sort entries in the file browser. By default, the entries are +# sorted alphabetically. Valid values: +# +# • alpha (alphabetically) +# +# • count (all message count) +# +# • flagged (flagged message count) +# +# • name (alphabetically) +# +# • new (unread message count) +# +# • path (alphabetically) +# +# • unread (unread message count) +# +# • unsorted +# +# You may optionally use the “reverse-” prefix to specify reverse sorting order +# (example: “set sort_browser=reverse-date”). +# + + +# 3.278. sidebar_visible +# +# Type: boolean +# Default: no +# +# This specifies whether or not to show sidebar. The sidebar shows a list of all +# your mailboxes. +# +# See also: $sidebar_format, $sidebar_width +# +set sidebar_visible=no + + +# 3.279. sidebar_width +# +# Type: number +# Default: 30 +# +# This controls the width of the sidebar. It is measured in screen columns. For +# example: sidebar_width=20 could display 20 ASCII characters, or 10 Chinese +# characters. +# +set sidebar_width=20 + + +# 3.280. sig_dashes +# +# Type: boolean +# Default: yes +# +# If set, a line containing “-- ” (note the trailing space) will be inserted +# before your $signature. It is strongly recommended that you not unset this +# variable unless your signature contains just your name. The reason for this is +# because many software packages use “-- n” to detect your signature. For +# example, Mutt has the ability to highlight the signature in a different color +# in the built-in pager. +# +set sig_dashes=no + + +# 3.281. sig_on_top +# +# Type: boolean +# Default: no +# +# If set, the signature will be included before any quoted or forwarded text. It +# is strongly recommended that you do not set this variable unless you really +# know what you are doing, and are prepared to take some heat from netiquette +# guardians. +# + + +# 3.282. signature +# +# Type: path +# Default: “~/.signature” +# +# Specifies the filename of your signature, which is appended to all outgoing +# messages. If the filename ends with a pipe (“|”), it is assumed that filename +# is a shell command and input should be read from its standard output. +# + + +# 3.283. simple_search +# +# Type: string +# Default: “~f %s | ~s %s” +# +# Specifies how Mutt should expand a simple search into a real search pattern. A +# simple search is one that does not contain any of the “~” pattern operators. +# See “patterns” for more information on search patterns. +# +# For example, if you simply type “joe” at a search or limit prompt, Mutt will +# automatically expand it to the value specified by this variable by replacing “ +# %s” with the supplied string. For the default value, “joe” would be expanded +# to: “~f joe | ~s joe”. +# +set simple_search="~L %s | ~s %s" + + +# 3.284. sleep_time +# +# Type: number +# Default: 1 +# +# Specifies time, in seconds, to pause while displaying certain informational +# messages, while moving from folder to folder and after expunging messages from +# the current folder. The default is to pause one second, so a value of zero for +# this option suppresses the pause. +# + + +# 3.285. smart_wrap +# +# Type: boolean +# Default: yes +# +# Controls the display of lines longer than the screen width in the internal +# pager. If set, long lines are wrapped at a word boundary. If unset, lines are +# simply wrapped at the screen edge. Also see the $markers variable. +# + + +# 3.286. smileys +# +# Type: regular expression +# Default: “(>From )|(:[-^]?[][)(><}{|/DP])” +# +# The pager uses this variable to catch some common false positives of +# $quote_regexp, most notably smileys and not consider a line quoted text if it +# also matches $smileys. This mostly happens at the beginning of a line. +# + + +# 3.287. smime_ask_cert_label +# +# Type: boolean +# Default: yes +# +# This flag controls whether you want to be asked to enter a label for a +# certificate about to be added to the database or not. It is set by default. (S/ +# MIME only) +# + + +# 3.288. smime_ca_location +# +# Type: path +# Default: (empty) +# +# This variable contains the name of either a directory, or a file which contains +# trusted certificates for use with OpenSSL. (S/MIME only) +# + + +# 3.289. smime_certificates +# +# Type: path +# Default: (empty) +# +# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle +# storage and retrieval of keys by itself. This is very basic right now, and keys +# and certificates are stored in two different directories, both named as the +# hash-value retrieved from OpenSSL. There is an index file which contains +# mailbox-address keyid pairs, and which can be manually edited. This option +# points to the location of the certificates. (S/MIME only) +# +set smime_certificates="~/.smime/certificates" + + +# 3.290. smime_decrypt_command +# +# Type: string +# Default: (empty) +# +# This format string specifies a command which is used to decrypt application/ +# x-pkcs7-mime attachments. +# +# The OpenSSL command formats have their own set of printf(3)-like sequences +# similar to PGP's: +# +# ┌──┬──────────────────────────────────────────────────────────────────────────┐ +# │%f│Expands to the name of a file containing a message. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%s│Expands to the name of a file containing the signature part of a multipart│ +# │ │/signed attachment when verifying it. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%k│The key-pair specified with $smime_default_key │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%c│One or more certificate IDs. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%a│The algorithm used for encryption. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │%d│The message digest algorithm specified with $smime_sign_digest_alg. │ +# ├──┼──────────────────────────────────────────────────────────────────────────┤ +# │ │CA location: Depending on whether $smime_ca_location points to a directory│ +# │%C│or file, this expands to “-CApath $smime_ca_location” or “-CAfile │ +# │ │$smime_ca_location”. │ +# └──┴──────────────────────────────────────────────────────────────────────────┘ +# +# For examples on how to configure these formats, see the smime.rc in the samples +# / subdirectory which has been installed on your system alongside the +# documentation. (S/MIME only) +# + + +# 3.291. smime_decrypt_use_default_key +# +# Type: boolean +# Default: yes +# +# If set (default) this tells mutt to use the default key for decryption. +# Otherwise, if managing multiple certificate-key-pairs, mutt will try to use the +# mailbox-address to determine the key to use. It will ask you to supply a key, +# if it can't find one. (S/MIME only) +# + + +# 3.292. smime_default_key +# +# Type: string +# Default: (empty) +# +# This is the default key-pair to use for S/MIME operations, and must be set to +# the keyid (the hash-value that OpenSSL generates) to work properly. +# +# It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt). +# +# It will be used for decryption unless $smime_decrypt_use_default_key is unset. +# +# It will also be used for signing unless $smime_sign_as is set. +# +# The (now deprecated) smime_self_encrypt_as is an alias for this variable, and +# should no longer be used. (S/MIME only) +# + + +# 3.293. smime_encrypt_command +# +# Type: string +# Default: (empty) +# +# This command is used to create encrypted S/MIME messages. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.294. smime_encrypt_with +# +# Type: string +# Default: “aes256” +# +# This sets the algorithm that should be used for encryption. Valid choices are “ +# aes128”, “aes192”, “aes256”, “des”, “des3”, “rc2-40”, “rc2-64”, “rc2-128”. (S/ +# MIME only) +# + + +# 3.295. smime_get_cert_command +# +# Type: string +# Default: (empty) +# +# This command is used to extract X509 certificates from a PKCS7 structure. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.296. smime_get_cert_email_command +# +# Type: string +# Default: (empty) +# +# This command is used to extract the mail address(es) used for storing X509 +# certificates, and for verification purposes (to check whether the certificate +# was issued for the sender's mailbox). +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.297. smime_get_signer_cert_command +# +# Type: string +# Default: (empty) +# +# This command is used to extract only the signers X509 certificate from a S/MIME +# signature, so that the certificate's owner may get compared to the email's “ +# From:” field. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.298. smime_import_cert_command +# +# Type: string +# Default: (empty) +# +# This command is used to import a certificate via smime_keys. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.299. smime_is_default +# +# Type: boolean +# Default: no +# +# The default behavior of mutt is to use PGP on all auto-sign/encryption +# operations. To override and to use OpenSSL instead this must be set. However, +# this has no effect while replying, since mutt will automatically select the +# same application that was used to sign/encrypt the original message. (Note that +# this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only) +# + + +# 3.300. smime_keys +# +# Type: path +# Default: (empty) +# +# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle +# storage and retrieval of keys/certs by itself. This is very basic right now, +# and stores keys and certificates in two different directories, both named as +# the hash-value retrieved from OpenSSL. There is an index file which contains +# mailbox-address keyid pair, and which can be manually edited. This option +# points to the location of the private keys. (S/MIME only) +# +set smime_keys="~/.smime/keys" + + +# 3.301. smime_pk7out_command +# +# Type: string +# Default: (empty) +# +# This command is used to extract PKCS7 structures of S/MIME signatures, in order +# to extract the public X509 certificate(s). +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.302. smime_self_encrypt +# +# Type: boolean +# Default: yes +# +# When set, S/MIME encrypted messages will also be encrypted using the +# certificate in $smime_default_key. (S/MIME only) +# + + +# 3.303. smime_sign_as +# +# Type: string +# Default: (empty) +# +# If you have a separate key to use for signing, you should set this to the +# signing key. Most people will only need to set $smime_default_key. (S/MIME +# only) +# + + +# 3.304. smime_sign_command +# +# Type: string +# Default: (empty) +# +# This command is used to created S/MIME signatures of type multipart/signed, +# which can be read by all mail clients. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. NOTE: %c and %k will default to $smime_sign_as if +# set, otherwise $smime_default_key. (S/MIME only) +# + + +# 3.305. smime_sign_digest_alg +# +# Type: string +# Default: “sha256” +# +# This sets the algorithm that should be used for the signature message digest. +# Valid choices are “md5”, “sha1”, “sha224”, “sha256”, “sha384”, “sha512”. (S/ +# MIME only) +# + + +# 3.306. smime_sign_opaque_command +# +# Type: string +# Default: (empty) +# +# This command is used to created S/MIME signatures of type application/ +# x-pkcs7-signature, which can only be handled by mail clients supporting the S/ +# MIME extension. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.307. smime_timeout +# +# Type: number +# Default: 300 +# +# The number of seconds after which a cached passphrase will expire if not used. +# (S/MIME only) +# + + +# 3.308. smime_verify_command +# +# Type: string +# Default: (empty) +# +# This command is used to verify S/MIME signatures of type multipart/signed. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.309. smime_verify_opaque_command +# +# Type: string +# Default: (empty) +# +# This command is used to verify S/MIME signatures of type application/ +# x-pkcs7-mime. +# +# This is a format string, see the $smime_decrypt_command command for possible +# printf(3)-like sequences. (S/MIME only) +# + + +# 3.310. smtp_authenticators +# +# Type: string +# Default: (empty) +# +# This is a colon-delimited list of authentication methods mutt may attempt to +# use to log in to an SMTP server, in the order mutt should try them. +# Authentication methods are any SASL mechanism, e.g. “digest-md5”, “gssapi” or “ +# cram-md5”. This option is case-insensitive. If it is “unset” (the default) mutt +# will try all available methods, in order from most-secure to least-secure. +# +# Example: +# +# set smtp_authenticators="digest-md5:cram-md5" +# + + +# 3.311. smtp_oauth_refresh_command +# +# Type: string +# Default: (empty) +# +# The command to run to generate an OAUTH refresh token for authorizing your +# connection to your SMTP server. This command will be run on every connection +# attempt that uses the OAUTHBEARER authentication mechanism. +# + + +# 3.312. smtp_pass +# +# Type: string +# Default: (empty) +# +# Specifies the password for your SMTP account. If unset, Mutt will prompt you +# for your password when you first send mail via SMTP. See $smtp_url to configure +# mutt to send mail via SMTP. +# +# Warning: you should only use this option when you are on a fairly secure +# machine, because the superuser can read your muttrc even if you are the only +# one who can read the file. +# + + +# 3.313. smtp_url +# +# Type: string +# Default: (empty) +# +# Defines the SMTP smarthost where sent messages should relayed for delivery. +# This should take the form of an SMTP URL, e.g.: +# +# smtp[s]://[user[:pass]@]host[:port] +# +# where “[...]” denotes an optional part. Setting this variable overrides the +# value of the $sendmail variable. +# + + +# 3.314. sort +# +# Type: sort order +# Default: date +# +# Specifies how to sort messages in the “index” menu. Valid values are: +# +# • date or date-sent +# +# • date-received +# +# • from +# +# • mailbox-order (unsorted) +# +# • score +# +# • size +# +# • spam +# +# • subject +# +# • threads +# +# • to +# +# You may optionally use the “reverse-” prefix to specify reverse sorting order +# (example: “set sort=reverse-date-sent”). +# +set sort=threads + + +# 3.315. sort_alias +# +# Type: sort order +# Default: alias +# +# Specifies how the entries in the “alias” menu are sorted. The following are +# legal values: +# +# • address (sort alphabetically by email address) +# +# • alias (sort alphabetically by alias name) +# +# • unsorted (leave in order specified in .muttrc) +# + + +# 3.316. sort_aux +# +# Type: sort order +# Default: date +# +# When sorting by threads, this variable controls how threads are sorted in +# relation to other threads, and how the branches of the thread trees are sorted. +# This can be set to any value that $sort can, except “threads” (in that case, +# mutt will just use “date-sent”). You can also specify the “last-” prefix in +# addition to the “reverse-” prefix, but “last-” must come after “reverse-”. The +# “last-” prefix causes messages to be sorted against its siblings by which has +# the last descendant, using the rest of $sort_aux as an ordering. For instance, +# +# set sort_aux=last-date-received +# +# would mean that if a new message is received in a thread, that thread becomes +# the last one displayed (or the first, if you have “set sort=reverse-threads”.) +# +# Note: For reversed $sort order $sort_aux is reversed again (which is not the +# right thing to do, but kept to not break any existing configuration setting). +# +set sort_aux=last-date-received + + +# 3.317. sort_browser +# +# Type: sort order +# Default: alpha +# +# Specifies how to sort entries in the file browser. By default, the entries are +# sorted alphabetically. Valid values: +# +# • alpha (alphabetically) +# +# • count +# +# • date +# +# • size +# +# • unread +# +# • unsorted +# +# You may optionally use the “reverse-” prefix to specify reverse sorting order +# (example: “set sort_browser=reverse-date”). +# + + +# 3.318. sort_re +# +# Type: boolean +# Default: yes +# +# This variable is only useful when sorting by threads with $strict_threads unset +# . In that case, it changes the heuristic mutt uses to thread messages by +# subject. With $sort_re set, mutt will only attach a message as the child of +# another message by subject if the subject of the child message starts with a +# substring matching the setting of $reply_regexp. With $sort_re unset, mutt will +# attach the message whether or not this is the case, as long as the non- +# $reply_regexp parts of both messages are identical. +# + + +# 3.319. spam_separator +# +# Type: string +# Default: “,” +# +# This variable controls what happens when multiple spam headers are matched: if +# unset, each successive header will overwrite any previous matches value for the +# spam label. If set, each successive match will append to the previous, using +# this variable's value as a separator. +# + + +# 3.320. spoolfile +# +# Type: path +# Default: (empty) +# +# If your spool mailbox is in a non-default place where Mutt cannot find it, you +# can specify its location with this variable. Mutt will initially set this +# variable to the value of the environment variable $MAIL or $MAILDIR if either +# is defined. +# +set spoolfile="=inbox" + + +# 3.321. ssl_ca_certificates_file +# +# Type: path +# Default: (empty) +# +# This variable specifies a file containing trusted CA certificates. Any server +# certificate that is signed with one of these CA certificates is also +# automatically accepted. (GnuTLS only) +# +# Example: +# +# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt +# +set ssl_ca_certificates_file="/etc/ssl/certs/ca-certificates.crt" + + +# 3.322. ssl_client_cert +# +# Type: path +# Default: (empty) +# +# The file containing a client certificate and its associated private key. +# + + +# 3.323. ssl_force_tls +# +# Type: boolean +# Default: no +# +# If this variable is set, Mutt will require that all connections to remote +# servers be encrypted. Furthermore it will attempt to negotiate TLS even if the +# server does not advertise the capability, since it would otherwise have to +# abort the connection anyway. This option supersedes $ssl_starttls. +# + + +# 3.324. ssl_min_dh_prime_bits +# +# Type: number +# Default: 0 +# +# This variable specifies the minimum acceptable prime size (in bits) for use in +# any Diffie-Hellman key exchange. A value of 0 will use the default from the +# GNUTLS library. (GnuTLS only) +# + + +# 3.325. ssl_starttls +# +# Type: quadoption +# Default: yes +# +# If set (the default), mutt will attempt to use STARTTLS on servers advertising +# the capability. When unset, mutt will not attempt to use STARTTLS regardless of +# the server's capabilities. +# + + +# 3.326. ssl_use_sslv2 +# +# Type: boolean +# Default: no +# +# This variable specifies whether to attempt to use SSLv2 in the SSL +# authentication process. Note that SSLv2 and SSLv3 are now considered +# fundamentally insecure and are no longer recommended. (OpenSSL only) +# + + +# 3.327. ssl_use_sslv3 +# +# Type: boolean +# Default: no +# +# This variable specifies whether to attempt to use SSLv3 in the SSL +# authentication process. Note that SSLv2 and SSLv3 are now considered +# fundamentally insecure and are no longer recommended. +# + + +# 3.328. ssl_use_tlsv1 +# +# Type: boolean +# Default: yes +# +# This variable specifies whether to attempt to use TLSv1.0 in the SSL +# authentication process. +# + + +# 3.329. ssl_use_tlsv1_1 +# +# Type: boolean +# Default: yes +# +# This variable specifies whether to attempt to use TLSv1.1 in the SSL +# authentication process. +# + + +# 3.330. ssl_use_tlsv1_2 +# +# Type: boolean +# Default: yes +# +# This variable specifies whether to attempt to use TLSv1.2 in the SSL +# authentication process. +# + + +# 3.331. ssl_usesystemcerts +# +# Type: boolean +# Default: yes +# +# If set to yes, mutt will use CA certificates in the system-wide certificate +# store when checking if a server certificate is signed by a trusted CA. (OpenSSL +# only) +# + + +# 3.332. ssl_verify_dates +# +# Type: boolean +# Default: yes +# +# If set (the default), mutt will not automatically accept a server certificate +# that is either not yet valid or already expired. You should only unset this for +# particular known hosts, using the function. +# + + +# 3.333. ssl_verify_host +# +# Type: boolean +# Default: yes +# +# If set (the default), mutt will not automatically accept a server certificate +# whose host name does not match the host used in your folder URL. You should +# only unset this for particular known hosts, using the function. +# + + +# 3.334. ssl_verify_partial_chains +# +# Type: boolean +# Default: no +# +# This option should not be changed from the default unless you understand what +# you are doing. +# +# Setting this variable to yes will permit verifying partial certification +# chains, i. e. a certificate chain where not the root, but an intermediate +# certificate CA, or the host certificate, are marked trusted (in +# $certificate_file), without marking the root signing CA as trusted. +# +# (OpenSSL 1.0.2b and newer only). +# + + +# 3.335. ssl_ciphers +# +# Type: string +# Default: (empty) +# +# Contains a colon-seperated list of ciphers to use when using SSL. For OpenSSL, +# see ciphers(1) for the syntax of the string. +# +# For GnuTLS, this option will be used in place of "NORMAL" at the start of the +# priority string. See gnutls_priority_init(3) for the syntax and more details. +# (Note: GnuTLS version 2.1.7 or higher is required.) +# + + +# 3.336. status_chars +# +# Type: string +# Default: “-*%A” +# +# Controls the characters used by the “%r” indicator in $status_format. The first +# character is used when the mailbox is unchanged. The second is used when the +# mailbox has been changed, and it needs to be resynchronized. The third is used +# if the mailbox is in read-only mode, or if the mailbox will not be written when +# exiting that mailbox (You can toggle whether to write changes to a mailbox with +# the operation, bound by default to “%”). The fourth is used to +# indicate that the current folder has been opened in attach- message mode +# (Certain operations like composing a new mail, replying, forwarding, etc. are +# not permitted in this mode). +# + + +# 3.337. status_format +# +# Type: string +# Default: “-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? +# Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---” +# +# Controls the format of the status line displayed in the “index” menu. This +# string is similar to $index_format, but has its own set of printf(3)-like +# sequences: +# +# ┌───┬─────────────────────────────────────────────────────────────────────────┐ +# │%b │number of mailboxes with new mail * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%d │number of deleted messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%f │the full pathname of the current mailbox │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%F │number of flagged messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%h │local hostname │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%l │size (in bytes) of the current mailbox * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%L │size (in bytes) of the messages shown (i.e., which match the current │ +# │ │limit) * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%m │the number of messages in the mailbox * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%M │the number of messages shown (i.e., which match the current limit) * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%n │number of new messages in the mailbox * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%o │number of old unread messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%p │number of postponed messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%P │percentage of the way through the index │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%r │modified/read-only/won't-write/attach-message indicator, according to │ +# │ │$status_chars │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%R │number of read messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%s │current sorting mode ($sort) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%S │current aux sorting method ($sort_aux) │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%t │number of tagged messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%u │number of unread messages * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%v │Mutt version string │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%V │currently active limit pattern, if any * │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%>X│right justify the rest of the string and pad with “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%|X│pad to the end of the line with “X” │ +# ├───┼─────────────────────────────────────────────────────────────────────────┤ +# │%*X│soft-fill with character “X” as pad │ +# └───┴─────────────────────────────────────────────────────────────────────────┘ +# +# For an explanation of “soft-fill”, see the $index_format documentation. +# +# * = can be optionally printed if nonzero +# +# Some of the above sequences can be used to optionally print a string if their +# value is nonzero. For example, you may only want to see the number of flagged +# messages if such messages exist, since zero is not particularly meaningful. To +# optionally print a string based upon one of the above sequences, the following +# construct is used: +# +# %??? +# +# where sequence_char is a character from the table above, and optional_string is +# the string you would like printed if sequence_char is nonzero. optional_string +# may contain other sequences as well as normal text, but you may not nest +# optional strings. +# +# Here is an example illustrating how to optionally print the number of new +# messages in a mailbox: +# +# %?n?%n new messages.? +# +# You can also switch between two strings using the following construct: +# +# %??&? +# +# If the value of sequence_char is non-zero, if_string will be expanded, +# otherwise else_string will be expanded. +# +# You can force the result of any printf(3)-like sequence to be lowercase by +# prefixing the sequence character with an underscore (“_”) sign. For example, if +# you want to display the local hostname in lowercase, you would use: “%_h”. +# +# If you prefix the sequence character with a colon (“:”) character, mutt will +# replace any dots in the expansion by underscores. This might be helpful with +# IMAP folders that don't like dots in folder names. +# +set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) " + + +# 3.338. status_on_top +# +# Type: boolean +# Default: no +# +# Setting this variable causes the “status bar” to be displayed on the first line +# of the screen rather than near the bottom. If $help is set, too it'll be placed +# at the bottom. +# + + +# 3.339. strict_threads +# +# Type: boolean +# Default: no +# +# If set, threading will only make use of the “In-Reply-To” and “References:” +# fields when you $sort by message threads. By default, messages with the same +# subject are grouped together in “pseudo threads.”. This may not always be +# desirable, such as in a personal mailbox where you might have several unrelated +# messages with the subjects like “hi” which will get grouped together. See also +# $sort_re for a less drastic way of controlling this behavior. +# +set strict_threads=yes + + +# 3.340. suspend +# +# Type: boolean +# Default: yes +# +# When unset, mutt won't stop when the user presses the terminal's susp key, +# usually “^Z”. This is useful if you run mutt inside an xterm using a command +# like “xterm -e mutt”. +# + + +# 3.341. text_flowed +# +# Type: boolean +# Default: no +# +# When set, mutt will generate “format=flowed” bodies with a content type of “ +# text/plain; format=flowed”. This format is easier to handle for some mailing +# software, and generally just looks like ordinary text. To actually make use of +# this format's features, you'll need support in your editor. +# +# Note that $indent_string is ignored when this option is set. +# +set text_flowed=yes + + +# 3.342. thorough_search +# +# Type: boolean +# Default: yes +# +# Affects the ~b and ~h search operations described in section “patterns”. If set +# , the headers and body/attachments of messages to be searched are decoded +# before searching. If unset, messages are searched as they appear in the folder. +# +# Users searching attachments or for non-ASCII characters should set this value +# because decoding also includes MIME parsing/decoding and possible character set +# conversions. Otherwise mutt will attempt to match against the raw message +# received (for example quoted-printable encoded or with encoded headers) which +# may lead to incorrect search results. +# +set thorough_search=yes + + +# 3.343. thread_received +# +# Type: boolean +# Default: no +# +# When set, mutt uses the date received rather than the date sent to thread +# messages by subject. +# +set thread_received=yes + + +# 3.344. tilde +# +# Type: boolean +# Default: no +# +# When set, the internal-pager will pad blank lines to the bottom of the screen +# with a tilde (“~”). +# +set tilde=yes + + +# 3.345. time_inc +# +# Type: number +# Default: 0 +# +# Along with $read_inc, $write_inc, and $net_inc, this variable controls the +# frequency with which progress updates are displayed. It suppresses updates less +# than $time_inc milliseconds apart. This can improve throughput on systems with +# slow terminals, or when running mutt on a remote system. +# +# Also see the “tuning” section of the manual for performance considerations. +# +set time_inc=250 + + +# 3.346. timeout +# +# Type: number +# Default: 600 +# +# When Mutt is waiting for user input either idling in menus or in an interactive +# prompt, Mutt would block until input is present. Depending on the context, this +# would prevent certain operations from working, like checking for new mail or +# keeping an IMAP connection alive. +# +# This variable controls how many seconds Mutt will at most wait until it aborts +# waiting for input, performs these operations and continues to wait for input. +# +# A value of zero or less will cause Mutt to never time out. +# + + +# 3.347. tmpdir +# +# Type: path +# Default: (empty) +# +# This variable allows you to specify where Mutt will place its temporary files +# needed for displaying and composing messages. If this variable is not set, the +# environment variable $TMPDIR is used. If $TMPDIR is not set then “/tmp” is +# used. +# + + +# 3.348. to_chars +# +# Type: string +# Default: “ +TCFL” +# +# Controls the character used to indicate mail addressed to you. The first +# character is the one used when the mail is not addressed to your address. The +# second is used when you are the only recipient of the message. The third is +# when your address appears in the “To:” header field, but you are not the only +# recipient of the message. The fourth character is used when your address is +# specified in the “Cc:” header field, but you are not the only recipient. The +# fifth character is used to indicate mail that was sent by you. The sixth +# character is used to indicate when a mail was sent to a mailing-list you +# subscribe to. +# + + +# 3.349. trash +# +# Type: path +# Default: (empty) +# +# If set, this variable specifies the path of the trash folder where the mails +# marked for deletion will be moved, instead of being irremediably purged. +# +# NOTE: When you delete a message in the trash folder, it is really deleted, so +# that you have a way to clean the trash. +# + + +# 3.350. ts_icon_format +# +# Type: string +# Default: “M%?n?AIL&ail?” +# +# Controls the format of the icon title, as long as “$ts_enabled” is set. This +# string is identical in formatting to the one used by “$status_format”. +# + + +# 3.351. ts_enabled +# +# Type: boolean +# Default: no +# +# Controls whether mutt tries to set the terminal status line and icon name. Most +# terminal emulators emulate the status line in the window title. +# +set ts_enabled=yes + + +# 3.352. ts_status_format +# +# Type: string +# Default: “Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?” +# +# Controls the format of the terminal status line (or window title), provided +# that “$ts_enabled” has been set. This string is identical in formatting to the +# one used by “$status_format”. +# +set ts_status_format="mutt: %f%?V?[%V]&?" + + +# 3.353. tunnel +# +# Type: string +# Default: (empty) +# +# Setting this variable will cause mutt to open a pipe to a command instead of a +# raw socket. You may be able to use this to set up preauthenticated connections +# to your IMAP/POP3/SMTP server. Example: +# +# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" +# +# Note: For this example to work you must be able to log in to the remote machine +# without having to enter a password. +# +# When set, Mutt uses the tunnel for all remote connections. Please see “ +# account-hook” in the manual for how to use different tunnel commands per +# connection. +# + + +# 3.354. uncollapse_jump +# +# Type: boolean +# Default: no +# +# When set, Mutt will jump to the next unread message, if any, when the current +# thread is uncollapsed. +# + + +# 3.355. uncollapse_new +# +# Type: boolean +# Default: yes +# +# When set, Mutt will automatically uncollapse any collapsed thread that receives +# a new message. When unset, collapsed threads will remain collapsed. the +# presence of the new message will still affect index sorting, though. +# + + +# 3.356. use_8bitmime +# +# Type: boolean +# Default: no +# +# Warning: do not set this variable unless you are using a version of sendmail +# which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be +# able to send mail. +# +# When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending +# 8-bit messages to enable ESMTP negotiation. +# + + +# 3.357. use_domain +# +# Type: boolean +# Default: yes +# +# When set, Mutt will qualify all local addresses (ones without the “@host” +# portion) with the value of $hostname. If unset, no addresses will be qualified. +# + + +# 3.358. use_envelope_from +# +# Type: boolean +# Default: no +# +# When set, mutt will set the envelope sender of the message. If +# $envelope_from_address is set, it will be used as the sender address. If unset, +# mutt will attempt to derive the sender from the “From:” header. +# +# Note that this information is passed to sendmail command using the -f command +# line switch. Therefore setting this option is not useful if the $sendmail +# variable already contains -f or if the executable pointed to by $sendmail +# doesn't support the -f switch. +# +set use_envelope_from=yes + + +# 3.359. use_from +# +# Type: boolean +# Default: yes +# +# When set, Mutt will generate the “From:” header field when sending messages. If +# unset, no “From:” header field will be generated unless the user explicitly +# sets one using the “my_hdr” command. +# + + +# 3.360. use_ipv6 +# +# Type: boolean +# Default: yes +# +# When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If +# this option is unset, Mutt will restrict itself to IPv4 addresses. Normally, +# the default should work. +# + + +# 3.361. user_agent +# +# Type: boolean +# Default: yes +# +# When set, mutt will add a “User-Agent:” header to outgoing messages, indicating +# which version of mutt was used for composing them. +# + + +# 3.362. visual +# +# Type: path +# Default: (empty) +# +# Specifies the visual editor to invoke when the “~v” command is given in the +# built-in editor. +# + + +# 3.363. wait_key +# +# Type: boolean +# Default: yes +# +# Controls whether Mutt will ask you to press a key after an external command has +# been invoked by these functions: , , , +# , and commands. +# +# It is also used when viewing attachments with “auto_view”, provided that the +# corresponding mailcap entry has a needsterminal flag, and the external program +# is interactive. +# +# When set, Mutt will always ask for a key. When unset, Mutt will wait for a key +# only if the external command returned a non-zero status. +# +set wait_key=no + + +# 3.364. weed +# +# Type: boolean +# Default: yes +# +# When set, mutt will weed headers when displaying, forwarding, printing, or +# replying to messages. +# + + +# 3.365. wrap +# +# Type: number +# Default: 0 +# +# When set to a positive value, mutt will wrap text at $wrap characters. When set +# to a negative value, mutt will wrap text so that there are $wrap characters of +# empty space on the right side of the terminal. Setting it to zero makes mutt +# wrap at the terminal width. +# +# Also see $reflow_wrap. +# +set wrap=-10 + + +# 3.366. wrap_headers +# +# Type: number +# Default: 78 +# +# This option specifies the number of characters to use for wrapping an outgoing +# message's headers. Allowed values are between 78 and 998 inclusive. +# +# Note: This option usually shouldn't be changed. RFC5233 recommends a line +# length of 78 (the default), so please only change this setting when you know +# what you're doing. +# + + +# 3.367. wrap_search +# +# Type: boolean +# Default: yes +# +# Controls whether searches wrap around the end. +# +# When set, searches will wrap around the first (or last) item. When unset, +# incremental searches will not wrap. +# + + +# 3.368. wrapmargin +# +# Type: number +# Default: 0 +# +# (DEPRECATED) Equivalent to setting $wrap with a negative value. +# + + +# 3.369. write_bcc +# +# Type: boolean +# Default: yes +# +# Controls whether mutt writes out the “Bcc:” header when preparing messages to +# be sent. Exim users may wish to unset this. If mutt is set to deliver directly +# via SMTP (see $smtp_url), this option does nothing: mutt will never write out +# the “Bcc:” header in this case. +# + + +# 3.370. write_inc +# +# Type: number +# Default: 10 +# +# When writing a mailbox, a message will be printed every $write_inc messages to +# indicate progress. If set to 0, only a single message will be displayed before +# writing a mailbox. +# +# Also see the $read_inc, $net_inc and $time_inc variables and the “tuning” +# section of the manual for performance considerations. +# diff --git a/.mutt/mkconf b/.mutt/mkconf new file mode 100755 index 0000000..c16c254 --- /dev/null +++ b/.mutt/mkconf @@ -0,0 +1,70 @@ +#!/bin/sh +set -eu + +FILE="${1:-}" +TARGET="${2:-}" + +if [ ! -f "$FILE" ]; then + echo >&2 "E: File $FILE does not exist" + exit 1 +fi + +if [ -z "$TARGET" ]; then + TARGET="$FILE" +fi + +TMPFILE="$(mktemp -t vit.XXXXXXXX)" +cleanup() { rm -f "$TMPFILE"; trap - 1 2 3 4 5 6 7 8 10 11 12 13 14 15; } +trap cleanup 1 2 3 4 5 6 7 8 10 11 12 13 14 15 + +process_stanza() { + echo "$2" + local opt setting trailer + opt="$(sed -ne "/^set ${1}=/,/# 3\./p" $FILE)" + if [ -n "$opt" ]; then + opt="${opt% +*}" + setting="${opt%% +*}" + echo >&2 "Importing setting: $setting …" + echo "$setting" + echo "$opt" | grep '^#' || : + fi + echo + echo +} + +option= +{ zcat /usr/share/doc/mutt/manual.txt.gz | \ + sed -e '1,/^3\. Configuration Variables$/d;1d;/^4\./,$d' -e 's, , ,g'; + echo END; } | \ + +while read first rest; do + line="$first ${rest%% }" + case "$first" in + (3.[0-9]*|END) + [ -z "$option" ] || \ + process_stanza "$option" "${stanza}" + stanza="# $line" + option="$rest" + ;; + ('') + stanza="${stanza:+$stanza\n}#$line" + ;; + (*) + stanza="${stanza:+$stanza\n}# $line" + ;; + esac + +done > $TMPFILE + +cat <<_eof > "$TARGET" +# Auto-generated using mkconf from manual.txt +# on $(date +'%Y-%m-%d %H:%M:%S') +# +# Invoked as: $0 $@ +# + +$(cat "$TMPFILE") +_eof +cleanup diff --git a/.mutt/muttrc b/.mutt/muttrc index 8ae6d9e..61401d9 100644 --- a/.mutt/muttrc +++ b/.mutt/muttrc @@ -2,4571 +2,6 @@ set my_confdir="$HOME/.mutt" -# set abort_noattach=no -# -# Name: abort_noattach -# Type: quadoption -# Default: no -# -# -# When the body of the message matches $abort_noattach_regexp and -# there are no attachments, this quadoption controls whether to -# abort sending the message. -# -set abort_noattach=ask-yes -# -# set abort_noattach_regexp="attach" -# -# Name: abort_noattach_regexp -# Type: regular expression -# Default: "attach" -# -# -# Specifies a regular expression to match against the body of the -# message, to determine if an attachment was mentioned but -# mistakenly forgotten. If it matches, $abort_noattach will be -# consulted to determine if message sending will be aborted. -# -# Like other regular expressions in Mutt, the search is case -# sensitive if the pattern contains at least one upper case letter, -# and case insensitive otherwise. -# -set abort_noattach_regexp='attach|beigefügt|angehängt|an(hang|lage)' -#'attach(ing|ed|ment)?|included\W+(with|in)\W+th(is|e\W+(curr|pres)ent)\W+mail|an(geh(ä|=E4|=C3=A4)ngt|h(ä|=E4|=C3=A4)ngsel|bei)|bei(gef(ü|=FC|=C3=BC)gt|lage)|(im|siehe)\W+(anhang|beilage)|attach(e|er|(é|=E9|=C3=A9)e?s?|ement|ant)' -# -# set abort_nosubject=ask-yes -# -# Name: abort_nosubject -# Type: quadoption -# Default: ask-yes -# -# -# If set to yes, when composing messages and no subject is given -# at the subject prompt, composition will be aborted. If set to -# no, composing messages with no subject given at the subject -# prompt will never be aborted. -# -# -# set abort_unmodified=yes -# -# Name: abort_unmodified -# Type: quadoption -# Default: yes -# -# -# If set to yes, composition will automatically abort after -# editing the message body if no changes are made to the file (this -# check only happens after the first edit of the file). When set -# to no, composition will never be aborted. -# -# -# set alias_file="~/.muttrc" -# -# Name: alias_file -# Type: path -# Default: "~/.muttrc" -# -# -# The default file in which to save aliases created by the -# ``create-alias'' function. -# -# Note: Mutt will not automatically source this file; you must -# explicitly use the ``source'' command for it to be executed. -# -# The default for this option is the currently used muttrc file, or -# ``~/.muttrc'' if no user muttrc was found. -# -# -# set alias_format="%4n %2f %t %-10a %r" -# -# Name: alias_format -# Type: string -# Default: "%4n %2f %t %-10a %r" -# -# -# Specifies the format of the data displayed for the `alias' menu. The -# following printf(3)-style sequences are available: -# -# %a alias name -# %f flags - currently, a "d" for an alias marked for deletion -# %n index number -# %r address which alias expands to -# %t character which indicates if the alias is tagged for inclusion -# -# -# set allow_8bit=yes -# -# Name: allow_8bit -# Type: boolean -# Default: yes -# -# -# Controls whether 8-bit data is converted to 7-bit using either Quoted- -# Printable or Base64 encoding when sending mail. -# -# -# set allow_ansi=no -# -# Name: allow_ansi -# Type: boolean -# Default: no -# -# -# Controls whether ANSI color codes in messages (and color tags in -# rich text messages) are to be interpreted. -# Messages containing these codes are rare, but if this option is set, -# their text will be colored accordingly. Note that this may override -# your color choices, and even present a security problem, since a -# message could include a line like "[-- PGP output follows ..." and -# give it the same color as your attachment color. -# -# -# set arrow_cursor=no -# -# Name: arrow_cursor -# Type: boolean -# Default: no -# -# -# When set, an arrow (``->'') will be used to indicate the current entry -# in menus instead of highlighting the whole line. On slow network or modem -# links this will make response faster because there is less that has to -# be redrawn on the screen when moving to the next or previous entries -# in the menu. -# -# -# set ascii_chars=no -# -# Name: ascii_chars -# Type: boolean -# Default: no -# -# -# If set, Mutt will use plain ASCII characters when displaying thread -# and attachment trees, instead of the default ACS characters. -# -# -# set askbcc=no -# -# Name: askbcc -# Type: boolean -# Default: no -# -# -# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients -# before editing an outgoing message. -# -# -# set askcc=no -# -# Name: askcc -# Type: boolean -# Default: no -# -# -# If set, Mutt will prompt you for carbon-copy (Cc) recipients before -# editing the body of an outgoing message. -# -# -# set assumed_charset="" -# -# Name: assumed_charset -# Type: string -# Default: "" -# -# -# This variable is a colon-separated list of character encoding -# schemes for messages without character encoding indication. -# Header field values and message body content without character encoding -# indication would be assumed that they are written in one of this list. -# By default, all the header fields and message body without any charset -# indication are assumed to be in "us-ascii". -# -# For example, Japanese users might prefer this: -# -# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" -# -# However, only the first content is valid for the message body. -# -# -# set attach_charset="" -# -# Name: attach_charset -# Type: string -# Default: "" -# -# -# This variable is a colon-separated list of character encoding -# schemes for text file attachments. -# If unset, $charset value will be used instead. -# For example, the following configuration would work for Japanese -# text handling: -# -# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" -# -# Note: "iso-2022-*" must be put at the head of the value as shown above -# if included. -# -# -# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " -# -# Name: attach_format -# Type: string -# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " -# -# -# This variable describes the format of the `attachment' menu. The -# following printf-style sequences are understood: -# -# %C charset -# %c requires charset conversion (n or c) -# %D deleted flag -# %d description -# %e MIME content-transfer-encoding -# %f filename -# %I disposition (I=inline, A=attachment) -# %m major MIME type -# %M MIME subtype -# %n attachment number -# %Q "Q", if MIME part qualifies for attachment counting -# %s size -# %t tagged flag -# %T graphic tree characters -# %u unlink (=to delete) flag -# %X number of qualifying MIME parts in this part and its children -# (please see the ``attachments'' section for possible speed effects) -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# %*X soft-fill with character "X" as pad -# -# -# For an explanation of `soft-fill', see the ``$index_format'' documentation. -# -# -# set attach_sep="\n" -# -# Name: attach_sep -# Type: string -# Default: "\n" -# -# -# The separator to add between attachments when operating (saving, -# printing, piping, etc) on a list of tagged attachments. -# -# -# set attach_split=yes -# -# Name: attach_split -# Type: boolean -# Default: yes -# -# -# If this variable is unset, when operating (saving, printing, piping, -# etc) on a list of tagged attachments, Mutt will concatenate the -# attachments and will operate on them as a single attachment. The -# ``$attach_sep'' separator is added after each attachment. When set, -# Mutt will operate on the attachments one by one. -# -# -# set attribution="On %d, %n wrote:" -# -# Name: attribution -# Type: string -# Default: "On %d, %n wrote:" -# -# -# This is the string that will precede a message which has been included -# in a reply. For a full listing of defined printf()-like sequences see -# the section on ``$index_format''. -# -set attribution="Quoting %n, who wrote on %{%Y-%m-%d} at %{%H:%M %z}:" -# -# set autoedit=no -# -# Name: autoedit -# Type: boolean -# Default: no -# -# -# When set along with ``$edit_headers'', Mutt will skip the initial -# send-menu and allow you to immediately begin editing the body of your -# message. The send-menu may still be accessed once you have finished -# editing the body of your message. -# -# Also see ``$fast_reply''. -# -set autoedit -# -# set auto_tag=no -# -# Name: auto_tag -# Type: boolean -# Default: no -# -# -# When set, functions in the index menu which affect a message -# will be applied to all tagged messages (if there are any). When -# unset, you must first use the tag-prefix function (default: ";") to -# make the next function apply to all tagged messages. -# -# -# set beep=yes -# -# Name: beep -# Type: boolean -# Default: yes -# -# -# When this variable is set, mutt will beep when an error occurs. -# -set beep=no -# -# set beep_new=no -# -# Name: beep_new -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will beep whenever it prints a message -# notifying you of new mail. This is independent of the setting of the -# ``$beep'' variable. -# -# -# set bounce=ask-yes -# -# Name: bounce -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether you will be asked to confirm bouncing messages. -# If set to yes you don't get asked if you want to bounce a -# message. Setting this variable to no is not generally useful, -# and thus not recommended, because you are unable to bounce messages. -# -# -# set bounce_delivered=yes -# -# Name: bounce_delivered -# Type: boolean -# Default: yes -# -# -# When this variable is set, mutt will include Delivered-To headers when -# bouncing messages. Postfix users may wish to unset this variable. -# -# Note: On Debian systems, this option is unset by default in -# /etc/Muttrc. -# -# -# set braille_friendly=no -# -# Name: braille_friendly -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will place the cursor at the beginning -# of the current line in menus, even when the arrow_cursor variable -# is unset, making it easier for blind persons using Braille displays to -# follow these menus. The option is disabled by default because many -# visual terminals don't permit making the cursor invisible. -# -# -# set check_mbox_size=no -# -# Name: check_mbox_size -# Type: boolean -# Default: no -# -# -# When this variable is set, mutt will use file size attribute instead of -# access time when checking for new mail. -# -# -# set charset="" -# -# Name: charset -# Type: string -# Default: "" -# -# -# Character set your terminal uses to display and enter textual data. -# It is also the fallback for $send_charset. -# -# -# set check_new=yes -# -# Name: check_new -# Type: boolean -# Default: yes -# -# -# Note: this option only affects maildir and MH style -# mailboxes. -# -# When set, Mutt will check for new mail delivered while the -# mailbox is open. Especially with MH mailboxes, this operation can -# take quite some time since it involves scanning the directory and -# checking each file to see if it has already been looked at. If -# check_new is unset, no check for new mail is performed -# while the mailbox is open. -# -# -# set collapse_unread=yes -# -# Name: collapse_unread -# Type: boolean -# Default: yes -# -# -# When unset, Mutt will not collapse a thread if it contains any -# unread messages. -# -# -# set uncollapse_jump=no -# -# Name: uncollapse_jump -# Type: boolean -# Default: no -# -# -# When set, Mutt will jump to the next unread message, if any, -# when the current thread is uncollapsed. -# -# -# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" -# -# Name: compose_format -# Type: string -# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" -# -# -# Controls the format of the status line displayed in the Compose -# menu. This string is similar to ``$status_format'', but has its own -# set of printf()-like sequences: -# -# %a total number of attachments -# %h local hostname -# %l approximate size (in bytes) of the current message -# %v Mutt version string -# -# -# See the text describing the ``$status_format'' option for more -# information on how to set ``$compose_format''. -# -# -# set config_charset="" -# -# Name: config_charset -# Type: string -# Default: "" -# -# -# When defined, Mutt will recode commands in rc files from this -# encoding. -# -# -# set confirmappend=yes -# -# Name: confirmappend -# Type: boolean -# Default: yes -# -# -# When set, Mutt will prompt for confirmation when appending messages to -# an existing mailbox. -# -set confirmappend=no -# -# set confirmcreate=yes -# -# Name: confirmcreate -# Type: boolean -# Default: yes -# -# -# When set, Mutt will prompt for confirmation when saving messages to a -# mailbox which does not yet exist before creating it. -# -# -# set connect_timeout=30 -# -# Name: connect_timeout -# Type: number -# Default: 30 -# -# -# Causes Mutt to timeout a network connection (for IMAP or POP) after this -# many seconds if the connection is not able to be established. A negative -# value causes Mutt to wait indefinitely for the connection to succeed. -# -# -# set content_type="text/plain" -# -# Name: content_type -# Type: string -# Default: "text/plain" -# -# -# Sets the default Content-Type for the body of newly composed messages. -# -# -# set copy=yes -# -# Name: copy -# Type: quadoption -# Default: yes -# -# -# This variable controls whether or not copies of your outgoing messages -# will be saved for later references. Also see ``$record'', -# ``$save_name'', ``$force_name'' and ``fcc-hook''. -# -set copy=yes -# -# set crypt_use_gpgme=no -# -# Name: crypt_use_gpgme -# Type: boolean -# Default: no -# -# -# This variable controls the use of the GPGME-enabled crypto backends. -# If it is set and Mutt was built with gpgme support, the gpgme code for -# S/MIME and PGP will be used instead of the classic code. Note that -# you need to set this option in .muttrc; it won't have any effect when -# used interactively. -# -# -# set crypt_use_pka=no -# -# Name: crypt_use_pka -# Type: boolean -# Default: no -# -# -# (http://www.g10code.de/docs/pka-intro.de.pdf) during signature -# verification (only supported by the GPGME backend). -# -# -# set crypt_autopgp=yes -# -# Name: crypt_autopgp -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not mutt may automatically enable -# PGP encryption/signing for messages. See also ``$crypt_autoencrypt'', -# ``$crypt_replyencrypt'', -# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. -# -# -# set crypt_autosmime=yes -# -# Name: crypt_autosmime -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not mutt may automatically enable -# S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'', -# ``$crypt_replyencrypt'', -# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. -# -# -# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z" -# -# Name: date_format -# Type: string -# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z" -# -# -# This variable controls the format of the date printed by the ``%d'' -# sequence in ``$index_format''. This is passed to the strftime -# call to process the date. See the man page for strftime(3) for -# the proper syntax. -# -# Unless the first character in the string is a bang (``!''), the month -# and week day names are expanded according to the locale specified in -# the variable ``$locale''. If the first character in the string is a -# bang, the bang is discarded, and the month and week day names in the -# rest of the string are expanded in the C locale (that is in US -# English). -# -set date_format="%d %b %Y %T%Z" -# -# set default_hook="~f %s !~P | (~P ~C %s)" -# -# Name: default_hook -# Type: string -# Default: "~f %s !~P | (~P ~C %s)" -# -# -# This variable controls how message-hooks, reply-hooks, send-hooks, -# send2-hooks, save-hooks, and fcc-hooks will -# be interpreted if they are specified with only a simple regexp, -# instead of a matching pattern. The hooks are expanded when they are -# declared, so a hook will be interpreted according to the value of this -# variable at the time the hook is declared. The default value matches -# if the message is either from a user matching the regular expression -# given, or if it is from you (if the from address matches -# ``alternates'') and is to or cc'ed to a user matching the given -# regular expression. -# -# -# set delete=ask-yes -# -# Name: delete -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not messages are really deleted when closing or -# synchronizing a mailbox. If set to yes, messages marked for -# deleting will automatically be purged without prompting. If set to -# no, messages marked for deletion will be kept in the mailbox. -# -set delete=yes -# -# set delete_untag=yes -# -# Name: delete_untag -# Type: boolean -# Default: yes -# -# -# If this option is set, mutt will untag messages when marking them -# for deletion. This applies when you either explicitly delete a message, -# or when you save it to another folder. -# -# -# set digest_collapse=yes -# -# Name: digest_collapse -# Type: boolean -# Default: yes -# -# -# If this option is set, mutt's received-attachments menu will not show the subparts of -# individual messages in a multipart/digest. To see these subparts, press 'v' on that menu. -# -# -# set display_filter="" -# -# Name: display_filter -# Type: path -# Default: "" -# -# -# When set, specifies a command used to filter messages. When a message -# is viewed it is passed as standard input to $display_filter, and the -# filtered message is read from the standard output. -# -# -# set dotlock_program="/usr/bin/mutt_dotlock" -# -# Name: dotlock_program -# Type: path -# Default: "/usr/bin/mutt_dotlock" -# -# -# Contains the path of the mutt_dotlock (8) binary to be used by -# mutt. -# -# -# set dsn_notify="" -# -# Name: dsn_notify -# Type: string -# Default: "" -# -# -# This variable sets the request for when notification is returned. The -# string consists of a comma separated list (no spaces!) of one or more -# of the following: never, to never request notification, -# failure, to request notification on transmission failure, -# delay, to be notified of message delays, success, to be -# notified of successful transmission. -# -# Example: set dsn_notify="failure,delay" -# -# Note: when using $sendmail for delivery, you should not enable -# this unless you are either using Sendmail 8.8.x or greater or a MTA -# providing a sendmail(1)-compatible interface supporting the -N option -# for DSN. For SMTP delivery, it depends on the server whether DSN is -# supported or not. -# -# -# set dsn_return="" -# -# Name: dsn_return -# Type: string -# Default: "" -# -# -# This variable controls how much of your message is returned in DSN -# messages. It may be set to either hdrs to return just the -# message header, or full to return the full message. -# -# Example: set dsn_return=hdrs -# -# Note: when using $sendmail for delivery, you should not enable -# this unless you are either using Sendmail 8.8.x or greater or a MTA -# providing a sendmail(1)-compatible interface supporting the -R option -# for DSN. For SMTP delivery, it depends on the server whether DSN is -# supported or not. -# -# -# set duplicate_threads=yes -# -# Name: duplicate_threads -# Type: boolean -# Default: yes -# -# -# This variable controls whether mutt, when sorting by threads, threads -# messages with the same message-id together. If it is set, it will indicate -# that it thinks they are duplicates of each other with an equals sign -# in the thread diagram. -# -# -# set edit_headers=no -# -# Name: edit_headers -# Type: boolean -# Default: no -# -# -# This option allows you to edit the header of your outgoing messages -# along with the body of your message. -# -# Note that changes made to the References: and Date: headers are -# ignored for interoperability reasons. -# -set edit_headers=yes -# -# set editor="" -# -# Name: editor -# Type: path -# Default: "" -# -# -# This variable specifies which editor is used by mutt. -# It defaults to the value of the VISUAL, or EDITOR, environment -# variable, or to the string "/usr/bin/editor" if neither of those are set. -# -set editor="mailplate --edit --auto --keep-unknown" -# -# set encode_from=no -# -# Name: encode_from -# Type: boolean -# Default: no -# -# -# When set, mutt will quoted-printable encode messages when -# they contain the string "From " in the beginning of a line. -# Useful to avoid the tampering certain mail delivery and transport -# agents tend to do with messages. -# -# -# set envelope_from_address="" -# -# Name: envelope_from_address -# Type: e-mail address -# Default: "" -# -# -# Manually sets the envelope sender for outgoing messages. -# This value is ignored if ``$use_envelope_from'' is unset. -# -# -# set escape="~" -# -# Name: escape -# Type: string -# Default: "~" -# -# -# Escape character to use for functions in the builtin editor. -# -# -# set fast_reply=no -# -# Name: fast_reply -# Type: boolean -# Default: no -# -# -# When set, the initial prompt for recipients and subject are skipped -# when replying to messages, and the initial prompt for subject is -# skipped when forwarding messages. -# -# Note: this variable has no effect when the ``$autoedit'' -# variable is set. -# -set fast_reply=yes -# -# set fcc_attach=yes -# -# Name: fcc_attach -# Type: boolean -# Default: yes -# -# -# This variable controls whether or not attachments on outgoing messages -# are saved along with the main body of your message. -# -set fcc_attach=yes -# -# set fcc_clear=no -# -# Name: fcc_clear -# Type: boolean -# Default: no -# -# -# When this variable is set, FCCs will be stored unencrypted and -# unsigned, even when the actual message is encrypted and/or -# signed. -# (PGP only) -# -# -# set folder="~/Mail" -# -# Name: folder -# Type: path -# Default: "~/Mail" -# -# -# Specifies the default location of your mailboxes. A `+' or `=' at the -# beginning of a pathname will be expanded to the value of this -# variable. Note that if you change this variable from the default -# value you need to make sure that the assignment occurs before -# you use `+' or `=' for any other variables since expansion takes place -# during the `set' command. -# -set folder="~/mail" -# -# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" -# -# Name: folder_format -# Type: string -# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" -# -# -# This variable allows you to customize the file browser display to your -# personal taste. This string is similar to ``$index_format'', but has -# its own set of printf()-like sequences: -# -# %C current file number -# %d date/time folder was last modified -# %f filename -# %F file permissions -# %g group name (or numeric gid, if missing) -# %l number of hard links -# %N N if folder has new mail, blank otherwise -# %s size in bytes -# %t * if the file is tagged, blank otherwise -# %u owner name (or numeric uid, if missing) -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# %*X soft-fill with character "X" as pad -# -# -# For an explanation of `soft-fill', see the ``$index_format'' documentation. -# -# -# set followup_to=yes -# -# Name: followup_to -# Type: boolean -# Default: yes -# -# ## ENABLED BY A DEFAULT HOOK -# -# Controls whether or not the Mail-Followup-To header field is -# generated when sending mail. When set, Mutt will generate this -# field when you are replying to a known mailing list, specified with -# the ``subscribe'' or ``lists'' commands. -# -# This field has two purposes. First, preventing you from -# receiving duplicate copies of replies to messages which you send -# to mailing lists, and second, ensuring that you do get a reply -# separately for any messages sent to known lists to which you are -# not subscribed. The header will contain only the list's address -# for subscribed lists, and both the list address and your own -# email address for unsubscribed lists. Without this header, a -# group reply to your message sent to a subscribed list will be -# sent to both the list and your address, resulting in two copies -# of the same email for you. -# -# -# set force_name=no -# -# Name: force_name -# Type: boolean -# Default: no -# -# -# This variable is similar to ``$save_name'', except that Mutt will -# store a copy of your outgoing message by the username of the address -# you are sending to even if that mailbox does not exist. -# -# Also see the ``$record'' variable. -# -# -# set forward_decode=yes -# -# Name: forward_decode -# Type: boolean -# Default: yes -# -# -# Controls the decoding of complex MIME messages into text/plain when -# forwarding a message. The message header is also RFC2047 decoded. -# This variable is only used, if ``$mime_forward'' is unset, -# otherwise ``$mime_forward_decode'' is used instead. -# -# -# set forward_edit=yes -# -# Name: forward_edit -# Type: quadoption -# Default: yes -# -# -# This quadoption controls whether or not the user is automatically -# placed in the editor when forwarding messages. For those who always want -# to forward with no modification, use a setting of ``no''. -# -# -# set forward_format="[%a: %s]" -# -# Name: forward_format -# Type: string -# Default: "[%a: %s]" -# -# -# This variable controls the default subject when forwarding a message. -# It uses the same format sequences as the ``$index_format'' variable. -# -set forward_format="(fwd) %s" -# -# set forward_quote=no -# -# Name: forward_quote -# Type: boolean -# Default: no -# -# -# When set forwarded messages included in the main body of the -# message (when ``$mime_forward'' is unset) will be quoted using -# ``$indent_string''. -# -# -# set from="" -# -# Name: from -# Type: e-mail address -# Default: "" -# -# -# When set, this variable contains a default from address. It -# can be overridden using my_hdr (including from send-hooks) and -# ``$reverse_name''. This variable is ignored if ``$use_from'' -# is unset. -# -# Defaults to the contents of the environment variable EMAIL. -# -set from='martin f krafft ' -# -# set gecos_mask="^[^,]*" -# -# Name: gecos_mask -# Type: regular expression -# Default: "^[^,]*" -# -# -# A regular expression used by mutt to parse the GECOS field of a password -# entry when expanding the alias. By default the regular expression is set -# to "^[^,]*" which will return the string up to the first "," encountered. -# If the GECOS field contains a string like "lastname, firstname" then you -# should set the gecos_mask=".*". -# -# This can be useful if you see the following behavior: you address a e-mail -# to user ID stevef whose full name is Steve Franklin. If mutt expands -# stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to -# a regular expression that will match the whole name so mutt will expand -# "Franklin" to "Franklin, Steve". -# -# -# set hdrs=yes -# -# Name: hdrs -# Type: boolean -# Default: yes -# -# -# When unset, the header fields normally added by the ``my_hdr'' -# command are not created. This variable must be unset before -# composing a new message or replying in order to take effect. If set, -# the user defined header fields are added to every new message. -# -# -# set header=no -# -# Name: header -# Type: boolean -# Default: no -# -# -# When set, this variable causes Mutt to include the header -# of the message you are replying to into the edit buffer. -# The ``$weed'' setting applies. -# -# -# set help=yes -# -# Name: help -# Type: boolean -# Default: yes -# -# -# When set, help lines describing the bindings for the major functions -# provided by each menu are displayed on the first line of the screen. -# -# Note: The binding will not be displayed correctly if the -# function is bound to a sequence rather than a single keystroke. Also, -# the help line may not be updated if a binding is changed while Mutt is -# running. Since this variable is primarily aimed at new users, neither -# of these should present a major problem. -# -# -# set hidden_host=no -# -# Name: hidden_host -# Type: boolean -# Default: no -# -# -# When set, mutt will skip the host name part of ``$hostname'' variable -# when adding the domain part to addresses. This variable does not -# affect the generation of Message-IDs, and it will not lead to the -# cut-off of first-level domains. -# -# -# set hide_limited=no -# -# Name: hide_limited -# Type: boolean -# Default: no -# -# -# When set, mutt will not show the presence of messages that are hidden -# by limiting, in the thread tree. -# -# -# set hide_missing=yes -# -# Name: hide_missing -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the presence of missing messages in the -# thread tree. -# -# -# set hide_thread_subject=yes -# -# Name: hide_thread_subject -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the subject of messages in the thread -# tree that have the same subject as their parent or closest previously -# displayed sibling. -# -# -# set hide_top_limited=no -# -# Name: hide_top_limited -# Type: boolean -# Default: no -# -# -# When set, mutt will not show the presence of messages that are hidden -# by limiting, at the top of threads in the thread tree. Note that when -# $hide_limited is set, this option will have no effect. -# -# -# set hide_top_missing=yes -# -# Name: hide_top_missing -# Type: boolean -# Default: yes -# -# -# When set, mutt will not show the presence of missing messages at the -# top of threads in the thread tree. Note that when $hide_missing is -# set, this option will have no effect. -# -# -# set history=10 -# -# Name: history -# Type: number -# Default: 10 -# -# -# This variable controls the size (in number of strings remembered) of -# the string history buffer. The buffer is cleared each time the -# variable is set. -# -# -# set history_file="~/.mutthistory" -# -# Name: history_file -# Type: path -# Default: "~/.mutthistory" -# -# -# The file in which Mutt will save its history. -# -set history_file="~/.var/mutt/history" -# -# set honor_followup_to=yes -# -# Name: honor_followup_to -# Type: quadoption -# Default: yes -# -# -# This variable controls whether or not a Mail-Followup-To header is -# honored when group-replying to a message. -# -# -# set hostname="" -# -# Name: hostname -# Type: string -# Default: "" -# -# -# Specifies the fully-qualified hostname of the system mutt is running on -# containing the host's name and the DNS domain it belongs to. It is used -# as the domain part (after ``@'') for local email addresses as well as -# Message-Id headers. -# -# Its value is determined at startup as follows: If the node's name -# as returned by the uname(3) function contains the hostname and the -# domain, these are used to construct $hostname. If there is no -# domain part returned, Mutt will look for a ``domain'' or ``search'' -# line in /etc/resolv.conf to determine the domain. Optionally, Mutt -# can be compiled with a fixed domain name in which case a detected -# one is not used. -# -# Also see ``$use_domain'' and ``$hidden_host''. -# -# Note: On Debian systems, the default for this variable is obtained -# from /etc/mailname when Mutt starts. -# -# -# set ignore_linear_white_space=no -# -# Name: ignore_linear_white_space -# Type: boolean -# Default: no -# -# -# This option replaces linear-white-space between encoded-word -# and *text to a single space to prevent the display of MIME-encoded -# ``Subject'' field from being divided into multiple lines. -# -# -# set ignore_list_reply_to=no -# -# Name: ignore_list_reply_to -# Type: boolean -# Default: no -# -# -# Affects the behaviour of the reply function when replying to -# messages from mailing lists (as defined by the ``subscribe'' or -# ``lists'' commands). When set, if the ``Reply-To:'' field is -# set to the same value as the ``To:'' field, Mutt assumes that the -# ``Reply-To:'' field was set by the mailing list to automate responses -# to the list, and will ignore this field. To direct a response to the -# mailing list when this option is set, use the list-reply -# function; group-reply will reply to both the sender and the -# list. -# -set ignore_list_reply_to=yes -# -# set imap_authenticators="" -# -# Name: imap_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an IMAP server, in the order mutt should -# try them. Authentication methods are either 'login' or the right -# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' -# or 'cram-md5'. This parameter is case-insensitive. If this -# parameter is unset (the default) mutt will try all available methods, -# in order from most-secure to least-secure. -# -# Example: set imap_authenticators="gssapi:cram-md5:login" -# -# Note: Mutt will only fall back to other authentication methods if -# the previous methods are unavailable. If a method is available but -# authentication fails, mutt will not connect to the IMAP server. -# -# -# set imap_check_subscribed=no -# -# Name: imap_check_subscribed -# Type: boolean -# Default: no -# -# -# When set, mutt will fetch the set of subscribed folders from -# your server on connection, and add them to the set of mailboxes -# it polls for new mail. See also the ``mailboxes'' command. -# -# -# set imap_delim_chars="/." -# -# Name: imap_delim_chars -# Type: string -# Default: "/." -# -# -# This contains the list of characters which you would like to treat -# as folder separators for displaying IMAP paths. In particular it -# helps in using the '=' shortcut for your folder variable. -# -# -# set imap_headers="" -# -# Name: imap_headers -# Type: string -# Default: "" -# -# -# Mutt requests these header fields in addition to the default headers -# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE -# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP -# servers before displaying the index menu. You may want to add more -# headers for spam detection. Note: This is a space separated list. -# -# -# set imap_idle=no -# -# Name: imap_idle -# Type: boolean -# Default: no -# -# -# When set, mutt will attempt to use the IMAP IDLE extension -# to check for new mail in the current mailbox. Some servers -# (dovecot was the inspiration for this option) react badly -# to mutt's implementation. If your connection seems to freeze -# up periodically, try unsetting this. -# -# -# set imap_keepalive=900 -# -# Name: imap_keepalive -# Type: number -# Default: 900 -# -# -# This variable specifies the maximum amount of time in seconds that mutt -# will wait before polling open IMAP connections, to prevent the server -# from closing them before mutt has finished with them. The default is -# well within the RFC-specified minimum amount of time (30 minutes) before -# a server is allowed to do this, but in practice the RFC does get -# violated every now and then. Reduce this number if you find yourself -# getting disconnected from your IMAP server due to inactivity. -# -# -# set imap_list_subscribed=no -# -# Name: imap_list_subscribed -# Type: boolean -# Default: no -# -# -# This variable configures whether IMAP folder browsing will look for -# only subscribed folders or all folders. This can be toggled in the -# IMAP browser with the toggle-subscribed function. -# -# -# set imap_login="" -# -# Name: imap_login -# Type: string -# Default: "" -# -# -# Your login name on the IMAP server. -# -# This variable defaults to the value of imap_user. -# -# -# set imap_pass="" -# -# Name: imap_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your IMAP account. If unset, Mutt will -# prompt you for your password when you invoke the fetch-mail function. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc even -# if you are the only one who can read the file. -# -# -# set imap_passive=yes -# -# Name: imap_passive -# Type: boolean -# Default: yes -# -# -# When set, mutt will not open new IMAP connections to check for new -# mail. Mutt will only check for new mail over existing IMAP -# connections. This is useful if you don't want to be prompted to -# user/password pairs on mutt invocation, or if opening the connection -# is slow. -# -# -# set imap_peek=yes -# -# Name: imap_peek -# Type: boolean -# Default: yes -# -# -# When set, mutt will avoid implicitly marking your mail as read whenever -# you fetch a message from the server. This is generally a good thing, -# but can make closing an IMAP folder somewhat slower. This option -# exists to appease speed freaks. -# -# -# set imap_servernoise=yes -# -# Name: imap_servernoise -# Type: boolean -# Default: yes -# -# -# When set, mutt will display warning messages from the IMAP -# server as error messages. Since these messages are often -# harmless, or generated due to configuration problems on the -# server which are out of the users' hands, you may wish to suppress -# them at some point. -# -# -# set imap_user="" -# -# Name: imap_user -# Type: string -# Default: "" -# -# -# The name of the user whose mail you intend to access on the IMAP -# server. -# -# This variable defaults to your user name on the local machine. -# -# -# set implicit_autoview=no -# -# Name: implicit_autoview -# Type: boolean -# Default: no -# -# -# If set to ``yes'', mutt will look for a mailcap entry with the -# copiousoutput flag set for every MIME attachment it doesn't have -# an internal viewer defined for. If such an entry is found, mutt will -# use the viewer defined in that entry to convert the body part to text -# form. -# -set implicit_autoview=no -# -# set include=ask-yes -# -# Name: include -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not a copy of the message(s) you are replying to -# is included in your reply. -# -set include=yes -# -# set include_onlyfirst=no -# -# Name: include_onlyfirst -# Type: boolean -# Default: no -# -# -# Controls whether or not Mutt includes only the first attachment -# of the message you are replying. -# -# -# set indent_string="> " -# -# Name: indent_string -# Type: string -# Default: "> " -# -# -# Specifies the string to prepend to each line of text quoted in a -# message to which you are replying. You are strongly encouraged not to -# change this value, as it tends to agitate the more fanatical netizens. -# -# This option is a format string, please see the description of -# ``$index_format'' for supported printf()-style sequences. -# -# -# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" -# -# Name: index_format -# Type: string -# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" -# -# -# This variable allows you to customize the message index display to -# your personal taste. -# -# ``Format strings'' are similar to the strings used in the ``C'' -# function printf to format output (see the man page for more detail). -# The following sequences are defined in Mutt: -# -# %a address of the author -# %A reply-to address (if present; otherwise: address of author) -# %b filename of the original message folder (think mailBox) -# %B the list to which the letter was sent, or else the folder name (%b). -# %c number of characters (bytes) in the message -# %C current message number -# %d date and time of the message in the format specified by -# ``date_format'' converted to sender's time zone -# %D date and time of the message in the format specified by -# ``date_format'' converted to the local time zone -# %e current message number in thread -# %E number of messages in current thread -# %f sender (address + real name), either From: or Return-Path: -# %F author name, or recipient name if the message is from you -# %H spam attribute(s) of this message -# %i message-id of the current message -# %l number of lines in the message (does not work with maildir, -# mh, and possibly IMAP folders) -# %L If an address in the To or CC header field matches an address -# defined by the users ``subscribe'' command, this displays -# "To ", otherwise the same as %F. -# %m total number of message in the mailbox -# %M number of hidden messages if the thread is collapsed. -# %N message score -# %n author's real name (or address if missing) -# %O (_O_riginal save folder) Where mutt would formerly have -# stashed the message: list name or recipient name if no list -# %P progress indicator for the builtin pager (how much of the file has been displayed) -# %s subject of the message -# %S status of the message (N/D/d/!/r/*) -# %t `to:' field (recipients) -# %T the appropriate character from the $to_chars string -# %u user (login) name of the author -# %v first name of the author, or the recipient if the message is from you -# %X number of attachments -# (please see the ``attachments'' section for possible speed effects) -# %y `x-label:' field, if present -# %Y `x-label' field, if present, and (1) not at part of a thread tree, -# (2) at the top of a thread, or (3) `x-label' is different from -# preceding message's `x-label'. -# %Z message status flags -# %{fmt} the date and time of the message is converted to sender's -# time zone, and ``fmt'' is expanded by the library function -# ``strftime''; a leading bang disables locales -# %[fmt] the date and time of the message is converted to the local -# time zone, and ``fmt'' is expanded by the library function -# ``strftime''; a leading bang disables locales -# %(fmt) the local date and time when the message was received. -# ``fmt'' is expanded by the library function ``strftime''; -# a leading bang disables locales -# % the current local time. ``fmt'' is expanded by the library -# function ``strftime''; a leading bang disables locales. -# %>X right justify the rest of the string and pad with character "X" -# %|X pad to the end of the line with character "X" -# %*X soft-fill with character "X" as pad -# -# -# `Soft-fill' deserves some explanation. Normal right-justification -# will print everything to the left of the %>, displaying padding and -# the whatever lies to the right only if there's room. By contrast, -# soft-fill gives priority to the right-hand side, guaranteeing space -# to display it and showing padding only if there's still room. If -# necessary, soft-fill will eat text leftwards to make room for -# rightward text. -# -# Note that these expandos are supported in -# ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too. -# -# See also: ``$to_chars''. -# -#set index_format="%4C %Z %{%b %d} %-15.15F %4c %?H?[%H] ?%s" ## DEFINED BY A DEFAULT HOOK -# -# set ispell="ispell" -# -# Name: ispell -# Type: path -# Default: "ispell" -# -# -# How to invoke ispell (GNU's spell-checking software). -# -# -# set keep_flagged=no -# -# Name: keep_flagged -# Type: boolean -# Default: no -# -# -# If set, read messages marked as flagged will not be moved -# from your spool mailbox to your ``$mbox'' mailbox, or as a result of -# a ``mbox-hook'' command. -# -# -# set locale="C" -# -# Name: locale -# Type: string -# Default: "C" -# -# -# The locale used by strftime(3) to format dates. Legal values are -# the strings your system accepts for the locale variable LC_TIME. -# -# -# set mail_check=5 -# -# Name: mail_check -# Type: number -# Default: 5 -# -# -# This variable configures how often (in seconds) mutt should look for -# new mail. Also see the ``$timeout'' variable. -# -# -# set mailcap_path="" -# -# Name: mailcap_path -# Type: string -# Default: "" -# -# -# This variable specifies which files to consult when attempting to -# display MIME bodies not directly supported by Mutt. -# -set mailcap_path="$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump" -# -# set mailcap_sanitize=yes -# -# Name: mailcap_sanitize -# Type: boolean -# Default: yes -# -# -# If set, mutt will restrict possible characters in mailcap % expandos -# to a well-defined set of safe characters. This is the safe setting, -# but we are not sure it doesn't break some more advanced MIME stuff. -# -# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE -# DOING! -# -# -# set header_cache="" -# -# Name: header_cache -# Type: path -# Default: "" -# -# -# The header_cache variable points to the header cache database. -# If header_cache points to a directory it will contain a header cache -# database per folder. If header_cache points to a file that file will -# be a single global header cache. By default it is unset so no header -# caching will be used. -# -set header_cache="~/.var/mutt/header_cache" -# -# set header_cache_compress=yes -# -# Name: header_cache_compress -# Type: boolean -# Default: yes -# -# When mutt is compiled with qdbm or tokyocabinet as header cache backend, -# this option determines whether the database will be compressed. Compression -# results in database files roughly being one fifth of the usual diskspace, -# but the uncompression can result in a slower opening of cached folder(s) -# which in general is still much faster than opening non header cached -# folders. -# -set header_cache_compress=no -# -# set maildir_header_cache_verify=yes -# -# Name: maildir_header_cache_verify -# Type: boolean -# Default: yes -# -# -# Check for Maildir unaware programs other than mutt having modified maildir -# files when the header cache is in use. This incurs one stat(2) per -# message every time the folder is opened. -# -set maildir_header_cache_verify=no -# -# set maildir_trash=no -# -# Name: maildir_trash -# Type: boolean -# Default: no -# -# -# If set, messages marked as deleted will be saved with the maildir -# (T)rashed flag instead of unlinked. NOTE: this only applies -# to maildir-style mailboxes. Setting it will have no effect on other -# mailbox types. -# -# -# set mark_old=yes -# -# Name: mark_old -# Type: boolean -# Default: yes -# -# -# Controls whether or not mutt marks new unread -# messages as old if you exit a mailbox without reading them. -# With this option set, the next time you start mutt, the messages -# will show up with an "O" next to them in the index menu, -# indicating that they are old. -# -set mark_old=yes -# -# set markers=yes -# -# Name: markers -# Type: boolean -# Default: yes -# -# -# Controls the display of wrapped lines in the internal pager. If set, a -# ``+'' marker is displayed at the beginning of wrapped lines. Also see -# the ``$smart_wrap'' variable. -# -set markers=no -# -# set mask="!^\\.[^.]" -# -# Name: mask -# Type: regular expression -# Default: "!^\\.[^.]" -# -# -# A regular expression used in the file browser, optionally preceded by -# the not operator ``!''. Only files whose names match this mask -# will be shown. The match is always case-sensitive. -# -# -# set mbox="~/mbox" -# -# Name: mbox -# Type: path -# Default: "~/mbox" -# -# -# This specifies the folder into which read mail in your ``$spoolfile'' -# folder will be appended. -# -# -# set mbox_type=mbox -# -# Name: mbox_type -# Type: folder magic -# Default: mbox -# -# -# The default mailbox type used when creating new folders. May be any of -# mbox, MMDF, MH and Maildir. -# -set mbox_type=Maildir -# -# set metoo=no -# -# Name: metoo -# Type: boolean -# Default: no -# -# -# If unset, Mutt will remove your address (see the ``alternates'' -# command) from the list of recipients when replying to a message. -# -# -# set menu_context=0 -# -# Name: menu_context -# Type: number -# Default: 0 -# -set menu_context=2 -# -# This variable controls the number of lines of context that are given -# when scrolling through menus. (Similar to ``$pager_context''.) -# -# -# set menu_move_off=yes -# -# Name: menu_move_off -# Type: boolean -# Default: yes -# -# -# When unset, the bottom entry of menus will never scroll up past -# the bottom of the screen, unless there are less entries than lines. -# When set, the bottom entry may move off the bottom. -# -# -# set menu_scroll=no -# -# Name: menu_scroll -# Type: boolean -# Default: no -# -set menu_scroll=yes -# -# When set, menus will be scrolled up or down one line when you -# attempt to move across a screen boundary. If unset, the screen -# is cleared and the next or previous page of the menu is displayed -# (useful for slow links to avoid many redraws). -# -# -# set meta_key=no -# -# Name: meta_key -# Type: boolean -# Default: no -# -# -# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) -# set as if the user had pressed the ESC key and whatever key remains -# after having the high bit removed. For example, if the key pressed -# has an ASCII value of 0xf8, then this is treated as if the user had -# pressed ESC then ``x''. This is because the result of removing the -# high bit from ``0xf8'' is ``0x78'', which is the ASCII character -# ``x''. -# -# -# set mh_purge=no -# -# Name: mh_purge -# Type: boolean -# Default: no -# -# -# When unset, mutt will mimic mh's behaviour and rename deleted messages -# to , in mh folders instead of really deleting -# them. If the variable is set, the message files will simply be -# deleted. -# -# -# set mh_seq_flagged="flagged" -# -# Name: mh_seq_flagged -# Type: string -# Default: "flagged" -# -# -# The name of the MH sequence used for flagged messages. -# -# -# set mh_seq_replied="replied" -# -# Name: mh_seq_replied -# Type: string -# Default: "replied" -# -# -# The name of the MH sequence used to tag replied messages. -# -# -# set mh_seq_unseen="unseen" -# -# Name: mh_seq_unseen -# Type: string -# Default: "unseen" -# -# -# The name of the MH sequence used for unseen messages. -# -# -# set mime_forward=no -# -# Name: mime_forward -# Type: quadoption -# Default: no -# -# -# When set, the message you are forwarding will be attached as a -# separate MIME part instead of included in the main body of the -# message. This is useful for forwarding MIME messages so the receiver -# can properly view the message as it was delivered to you. If you like -# to switch between MIME and not MIME from mail to mail, set this -# variable to ask-no or ask-yes. -# -# Also see ``$forward_decode'' and ``$mime_forward_decode''. -# -set mime_forward=ask-yes -# -# set mime_forward_decode=no -# -# Name: mime_forward_decode -# Type: boolean -# Default: no -# -# -# Controls the decoding of complex MIME messages into text/plain when -# forwarding a message while ``$mime_forward'' is set. Otherwise -# ``$forward_decode'' is used instead. -# -# -# set mime_forward_rest=yes -# -# Name: mime_forward_rest -# Type: quadoption -# Default: yes -# -# -# When forwarding multiple attachments of a MIME message from the recvattach -# menu, attachments which cannot be decoded in a reasonable manner will -# be attached to the newly composed message if this option is set. -# -# -# set pgp_mime_signature_filename="signature.asc" -# -# Name: pgp_mime_signature_filename -# Type: string -# Default: "signature.asc" -# -# -# This option sets the filename used for signature parts in PGP/MIME -# signed messages. -# -#set pgp_mime_signature_filename="digital_signature_gpg.asc" -# -# set pgp_mime_signature_description="Digital signature" -# -# Name: pgp_mime_signature_description -# Type: string -# Default: "Digital signature" -# -#set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/sig-policy/999bbcc4/current)" -# -# This option sets the Content-Description used for signature parts in -# PGP/MIME signed messages. -# -# -# set mix_entry_format="%4n %c %-16s %a" -# -# Name: mix_entry_format -# Type: string -# Default: "%4n %c %-16s %a" -# -# -# This variable describes the format of a remailer line on the mixmaster -# chain selection screen. The following printf-like sequences are -# supported: -# -# %n The running number on the menu. -# %c Remailer capabilities. -# %s The remailer's short name. -# %a The remailer's e-mail address. -# -# -# set mixmaster="mixmaster" -# -# Name: mixmaster -# Type: path -# Default: "mixmaster" -# -# -# This variable contains the path to the Mixmaster binary on your -# system. It is used with various sets of parameters to gather the -# list of known remailers, and to finally send a message through the -# mixmaster chain. -# -# Note: On Debian systems, this option is set by default to -# ``mixmaster-filter'' in /etc/Muttrc. -# -# -# set move=ask-no -# -# Name: move -# Type: quadoption -# Default: ask-no -# -# -# Controls whether or not Mutt will move read messages -# from your spool mailbox to your ``$mbox'' mailbox, or as a result of -# a ``mbox-hook'' command. -# -set move=no -# -# set message_cachedir="" -# -# Name: message_cachedir -# Type: path -# Default: "" -# -# -# Set this to a directory and mutt will cache copies of messages from -# your IMAP and POP servers here. You are free to remove entries at any -# time, for instance if stale entries accumulate because you have -# deleted messages with another mail client. -# -# -# set message_cache_clean=no -# -# Name: message_cache_clean -# Type: boolean -# Default: no -# -# -# If set, mutt will clean out obsolete entries from the cache when -# the mailbox is synchronized. You probably only want to set it -# every once in a while, since it can be a little slow. -# -# -# set message_format="%s" -# -# Name: message_format -# Type: string -# Default: "%s" -# -# -# This is the string displayed in the ``attachment'' menu for -# attachments of type message/rfc822. For a full listing of defined -# printf()-like sequences see the section on ``$index_format''. -# -# -# set narrow_tree=no -# -# Name: narrow_tree -# Type: boolean -# Default: no -# -# -# This variable, when set, makes the thread tree narrower, allowing -# deeper threads to fit on the screen. -# -set narrow_tree=yes -# -# set net_inc=10 -# -# Name: net_inc -# Type: number -# Default: 10 -# -# -# Operations that expect to transfer a large amount of data over the -# network will update their progress every net_inc kilobytes. -# If set to 0, no progress messages will be displayed. -# -# See also ``$read_inc'' and ``$write_inc''. -# -# -# set pager="builtin" -# -# Name: pager -# Type: path -# Default: "builtin" -# -# -# This variable specifies which pager you would like to use to view -# messages. builtin means to use the builtin pager, otherwise this -# variable should specify the pathname of the external pager you would -# like to use. -# -# Using an external pager may have some disadvantages: Additional -# keystrokes are necessary because you can't call mutt functions -# directly from the pager, and screen resizes cause lines longer than -# the screen width to be badly formatted in the help menu. -# -# -# set pager_context=0 -# -# Name: pager_context -# Type: number -# Default: 0 -# -# -# This variable controls the number of lines of context that are given -# when displaying the next or previous page in the internal pager. By -# default, Mutt will display the line after the last one on the screen -# at the top of the next page (0 lines of context). -# -set pager_context=2 -# -# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)" -# -# Name: pager_format -# Type: string -# Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)" -# -# -# This variable controls the format of the one-line message ``status'' -# displayed before each message in either the internal or an external -# pager. The valid sequences are listed in the ``$index_format'' -# section. -# -set pager_format="<%a> %* %i (%P)" -# -# set pager_index_lines=0 -# -# Name: pager_index_lines -# Type: number -# Default: 0 -# -# ## SET BY A DEFAULT HOOK -# -# Determines the number of lines of a mini-index which is shown when in -# the pager. The current message, unless near the top or bottom of the -# folder, will be roughly one third of the way down this mini-index, -# giving the reader the context of a few messages before and after the -# message. This is useful, for example, to determine how many messages -# remain to be read in the current thread. One of the lines is reserved -# for the status bar from the index, so a pager_index_lines of 6 -# will only show 5 lines of the actual index. A value of 0 results in -# no index being shown. If the number of messages in the current folder -# is less than pager_index_lines, then the index will only use as -# many lines as it needs. -# -set pager_index_lines=5 -# -# set pager_stop=no -# -# Name: pager_stop -# Type: boolean -# Default: no -# -# -# When set, the internal-pager will not move to the next message -# when you are at the end of a message and invoke the next-page -# function. -# -set pager_stop=yes -# -# set crypt_autosign=no -# -# Name: crypt_autosign -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to -# cryptographically sign outgoing messages. This can be overridden -# by use of the pgp-menu, when signing is not required or -# encryption is requested as well. If ``$smime_is_default'' is set, -# then OpenSSL is used instead to create S/MIME messages and settings can -# be overridden by use of the smime-menu. -# (Crypto only) -# -set crypt_autosign=yes -# -# set crypt_autoencrypt=no -# -# Name: crypt_autoencrypt -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to PGP -# encrypt outgoing messages. This is probably only useful in -# connection to the send-hook command. It can be overridden -# by use of the pgp-menu, when encryption is not required or -# signing is requested as well. IF ``$smime_is_default'' is set, -# then OpenSSL is used instead to create S/MIME messages and -# settings can be overridden by use of the smime-menu. -# (Crypto only) -# -# -# set pgp_ignore_subkeys=yes -# -# Name: pgp_ignore_subkeys -# Type: boolean -# Default: yes -# -# -# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, -# the principal key will inherit the subkeys' capabilities. Unset this -# if you want to play interesting key selection games. -# (PGP only) -# -# -# set crypt_replyencrypt=yes -# -# Name: crypt_replyencrypt -# Type: boolean -# Default: yes -# -# -# If set, automatically PGP or OpenSSL encrypt replies to messages which are -# encrypted. -# (Crypto only) -# -# -# set crypt_replysign=no -# -# Name: crypt_replysign -# Type: boolean -# Default: no -# -# -# If set, automatically PGP or OpenSSL sign replies to messages which are -# signed. -# -# Note: this does not work on messages that are encrypted -# and signed! -# (Crypto only) -# -set crypt_replysign=yes -# -# set crypt_replysignencrypted=no -# -# Name: crypt_replysignencrypted -# Type: boolean -# Default: no -# -# -# If set, automatically PGP or OpenSSL sign replies to messages -# which are encrypted. This makes sense in combination with -# ``$crypt_replyencrypt'', because it allows you to sign all -# messages which are automatically encrypted. This works around -# the problem noted in ``$crypt_replysign'', that mutt is not able -# to find out whether an encrypted message is also signed. -# (Crypto only) -# -set crypt_replysignencrypted=yes -# -# set crypt_timestamp=yes -# -# Name: crypt_timestamp -# Type: boolean -# Default: yes -# -# -# If set, mutt will include a time stamp in the lines surrounding -# PGP or S/MIME output, so spoofing such lines is more difficult. -# If you are using colors to mark these lines, and rely on these, -# you may unset this setting. -# (Crypto only) -# -# -# set pgp_use_gpg_agent=no -# -# Name: pgp_use_gpg_agent -# Type: boolean -# Default: no -# -# -# If set, mutt will use a possibly-running gpg-agent process. -# (PGP only) -# -set pgp_use_gpg_agent=yes -# -# set crypt_verify_sig=yes -# -# Name: crypt_verify_sig -# Type: quadoption -# Default: yes -# -# -# If ``yes'', always attempt to verify PGP or S/MIME signatures. -# If ``ask'', ask whether or not to verify the signature. -# If ``no'', never attempt to verify cryptographic signatures. -# (Crypto only) -# -# -# set smime_is_default=no -# -# Name: smime_is_default -# Type: boolean -# Default: no -# -# -# The default behaviour of mutt is to use PGP on all auto-sign/encryption -# operations. To override and to use OpenSSL instead this must be set. -# However, this has no effect while replying, since mutt will automatically -# select the same application that was used to sign/encrypt the original -# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.) -# (S/MIME only) -# -# -# set smime_ask_cert_label=yes -# -# Name: smime_ask_cert_label -# Type: boolean -# Default: yes -# -# -# This flag controls whether you want to be asked to enter a label -# for a certificate about to be added to the database or not. It is -# set by default. -# (S/MIME only) -# -# -# set smime_decrypt_use_default_key=yes -# -# Name: smime_decrypt_use_default_key -# Type: boolean -# Default: yes -# -# -# If set (default) this tells mutt to use the default key for decryption. Otherwise, -# if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address -# to determine the key to use. It will ask you to supply a key, if it can't find one. -# (S/MIME only) -# -# -# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u" -# -# Name: pgp_entry_format -# Type: string -# Default: "%4n %t%f %4l/0x%k %-4a %2c %u" -# -# -# This variable allows you to customize the PGP key selection menu to -# your personal taste. This string is similar to ``$index_format'', but -# has its own set of printf()-like sequences: -# -# %n number -# %k key id -# %u user id -# %a algorithm -# %l key length -# %f flags -# %c capabilities -# %t trust/validity of the key-uid association -# %[] date of the key where is an strftime(3) expression -# -# -# (PGP only) -# -# -# set pgp_good_sign="" -# -# Name: pgp_good_sign -# Type: regular expression -# Default: "" -# -# -# If you assign a text to this variable, then a PGP signature is only -# considered verified if the output from $pgp_verify_command contains -# the text. Use this variable if the exit code from the command is 0 -# even for bad signatures. -# (PGP only) -# -# -# set pgp_check_exit=yes -# -# Name: pgp_check_exit -# Type: boolean -# Default: yes -# -# -# If set, mutt will check the exit code of the PGP subprocess when -# signing or encrypting. A non-zero exit code means that the -# subprocess failed. -# (PGP only) -# -# -# set pgp_long_ids=no -# -# Name: pgp_long_ids -# Type: boolean -# Default: no -# -# -# If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. -# (PGP only) -# -# -# set pgp_retainable_sigs=no -# -# Name: pgp_retainable_sigs -# Type: boolean -# Default: no -# -# -# If set, signed and encrypted messages will consist of nested -# multipart/signed and multipart/encrypted body parts. -# -# This is useful for applications like encrypted and signed mailing -# lists, where the outer layer (multipart/encrypted) can be easily -# removed, while the inner multipart/signed part is retained. -# (PGP only) -# -set pgp_retainable_sigs=yes -# -# set pgp_autoinline=no -# -# Name: pgp_autoinline -# Type: boolean -# Default: no -# -# -# This option controls whether Mutt generates old-style inline -# (traditional) PGP encrypted or signed messages under certain -# circumstances. This can be overridden by use of the pgp-menu, -# when inline is not required. -# -# Note that Mutt might automatically use PGP/MIME for messages -# which consist of more than a single MIME part. Mutt can be -# configured to ask before sending PGP/MIME messages when inline -# (traditional) would not work. -# See also: ``$pgp_mime_auto''. -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_replyinline=no -# -# Name: pgp_replyinline -# Type: boolean -# Default: no -# -# -# Setting this variable will cause Mutt to always attempt to -# create an inline (traditional) message when replying to a -# message which is PGP encrypted/signed inline. This can be -# overridden by use of the pgp-menu, when inline is not -# required. This option does not automatically detect if the -# (replied-to) message is inline; instead it relies on Mutt -# internals for previously checked/flagged messages. -# -# Note that Mutt might automatically use PGP/MIME for messages -# which consist of more than a single MIME part. Mutt can be -# configured to ask before sending PGP/MIME messages when inline -# (traditional) would not work. -# See also: ``$pgp_mime_auto''. -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_show_unusable=yes -# -# Name: pgp_show_unusable -# Type: boolean -# Default: yes -# -# -# If set, mutt will display non-usable keys on the PGP key selection -# menu. This includes keys which have been revoked, have expired, or -# have been marked as ``disabled'' by the user. -# (PGP only) -# -set pgp_show_unusable=no -# -# set pgp_sign_as="" -# -# Name: pgp_sign_as -# Type: string -# Default: "" -# -# -# If you have more than one key pair, this option allows you to specify -# which of your private keys to use. It is recommended that you use the -# keyid form to specify your key (e.g., ``0x00112233''). -# (PGP only) -# -set pgp_sign_as="0x9C9D6979AE941637" -# -# set pgp_strict_enc=yes -# -# Name: pgp_strict_enc -# Type: boolean -# Default: yes -# -# -# If set, Mutt will automatically encode PGP/MIME signed messages as -# quoted-printable. Please note that unsetting this variable may -# lead to problems with non-verifyable PGP signatures, so only change -# this if you know what you are doing. -# (PGP only) -# -# -# set pgp_timeout=300 -# -# Name: pgp_timeout -# Type: number -# Default: 300 -# -# -# The number of seconds after which a cached passphrase will expire if -# not used. -# (PGP only) -# -# -# set pgp_sort_keys=address -# -# Name: pgp_sort_keys -# Type: sort order -# Default: address -# -# -# Specifies how the entries in the `pgp keys' menu are sorted. The -# following are legal values: -# -# address sort alphabetically by user id -# keyid sort alphabetically by key id -# date sort by key creation date -# trust sort by the trust of the key -# -# -# If you prefer reverse order of the above values, prefix it with -# `reverse-'. -# (PGP only) -# -# -# set pgp_mime_auto=ask-yes -# -# Name: pgp_mime_auto -# Type: quadoption -# Default: ask-yes -# -# -# This option controls whether Mutt will prompt you for -# automatically sending a (signed/encrypted) message using -# PGP/MIME when inline (traditional) fails (for any reason). -# -# Also note that using the old-style PGP message format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_auto_decode=no -# -# Name: pgp_auto_decode -# Type: boolean -# Default: no -# -# -# If set, mutt will automatically attempt to decrypt traditional PGP -# messages whenever the user performs an operation which ordinarily would -# result in the contents of the message being operated on. For example, -# if the user displays a pgp-traditional message which has not been manually -# checked with the check-traditional-pgp function, mutt will automatically -# check the message for traditional pgp. -# -set pgp_auto_decode=yes -# -# set pgp_decode_command="" -# -# Name: pgp_decode_command -# Type: string -# Default: "" -# -# -# This format strings specifies a command which is used to decode -# application/pgp attachments. -# -# The PGP command formats have their own set of printf-like sequences: -# -# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty -# string otherwise. Note: This may be used with a %? construct. -# %f Expands to the name of a file containing a message. -# %s Expands to the name of a file containing the signature part -# of a multipart/signed attachment when verifying it. -# %a The value of $pgp_sign_as. -# %r One or more key IDs. -# -# -# For examples on how to configure these formats for the various versions -# of PGP which are floating around, see the pgp*.rc and gpg.rc files in -# the samples/ subdirectory which has been installed on your system -# alongside the documentation. -# (PGP only) -# -# -# set pgp_getkeys_command="" -# -# Name: pgp_getkeys_command -# Type: string -# Default: "" -# -# -# This command is invoked whenever mutt will need public key information. -# %r is the only printf-like sequence used with this format. -# (PGP only) -# -# -# set pgp_verify_command="" -# -# Name: pgp_verify_command -# Type: string -# Default: "" -# -# -# This command is used to verify PGP signatures. -# (PGP only) -# -# -# set pgp_decrypt_command="" -# -# Name: pgp_decrypt_command -# Type: string -# Default: "" -# -# -# This command is used to decrypt a PGP encrypted message. -# (PGP only) -# -# -# set pgp_clearsign_command="" -# -# Name: pgp_clearsign_command -# Type: string -# Default: "" -# -# -# This format is used to create a old-style "clearsigned" PGP -# message. Note that the use of this format is strongly -# deprecated. -# (PGP only) -# -# -# set pgp_sign_command="" -# -# Name: pgp_sign_command -# Type: string -# Default: "" -# -# -# This command is used to create the detached PGP signature for a -# multipart/signed PGP/MIME body part. -# (PGP only) -# -# -# set pgp_encrypt_sign_command="" -# -# Name: pgp_encrypt_sign_command -# Type: string -# Default: "" -# -# -# This command is used to both sign and encrypt a body part. -# (PGP only) -# -# -# set pgp_encrypt_only_command="" -# -# Name: pgp_encrypt_only_command -# Type: string -# Default: "" -# -# -# This command is used to encrypt a body part without signing it. -# (PGP only) -# -# -# set pgp_import_command="" -# -# Name: pgp_import_command -# Type: string -# Default: "" -# -# -# This command is used to import a key from a message into -# the user's public key ring. -# (PGP only) -# -# -# set pgp_export_command="" -# -# Name: pgp_export_command -# Type: string -# Default: "" -# -# -# This command is used to export a public key from the user's -# key ring. -# (PGP only) -# -# -# set pgp_verify_key_command="" -# -# Name: pgp_verify_key_command -# Type: string -# Default: "" -# -# -# This command is used to verify key information from the key selection -# menu. -# (PGP only) -# -# -# set pgp_list_secring_command="" -# -# Name: pgp_list_secring_command -# Type: string -# Default: "" -# -# -# This command is used to list the secret key ring's contents. The -# output format must be analogous to the one used by -# gpg --list-keys --with-colons. -# -# This format is also generated by the pgpring utility which comes -# with mutt. -# (PGP only) -# -# -# set pgp_list_pubring_command="" -# -# Name: pgp_list_pubring_command -# Type: string -# Default: "" -# -# -# This command is used to list the public key ring's contents. The -# output format must be analogous to the one used by -# gpg --list-keys --with-colons. -# -# This format is also generated by the pgpring utility which comes -# with mutt. -# (PGP only) -# -# -# set forward_decrypt=yes -# -# Name: forward_decrypt -# Type: boolean -# Default: yes -# -# -# Controls the handling of encrypted messages when forwarding a message. -# When set, the outer layer of encryption is stripped off. This -# variable is only used if ``$mime_forward'' is set and -# ``$mime_forward_decode'' is unset. -# (PGP only) -# -# -# set smime_timeout=300 -# -# Name: smime_timeout -# Type: number -# Default: 300 -# -# -# The number of seconds after which a cached passphrase will expire if -# not used. -# (S/MIME only) -# -# -# set smime_encrypt_with="" -# -# Name: smime_encrypt_with -# Type: string -# Default: "" -# -# -# This sets the algorithm that should be used for encryption. -# Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128". -# If unset "3des" (TripleDES) is used. -# (S/MIME only) -# -# -# set smime_keys="" -# -# Name: smime_keys -# Type: path -# Default: "" -# -# -# Since there is no pubring/secring as with PGP, mutt has to handle -# storage ad retrieval of keys/certs by itself. This is very basic right now, -# and stores keys and certificates in two different directories, both -# named as the hash-value retrieved from OpenSSL. There is an index file -# which contains mailbox-address keyid pair, and which can be manually -# edited. This one points to the location of the private keys. -# (S/MIME only) -# -set smime_keys="~/.smime/keys" -# -# set smime_ca_location="" -# -# Name: smime_ca_location -# Type: path -# Default: "" -# -# -# This variable contains the name of either a directory, or a file which -# contains trusted certificates for use with OpenSSL. -# (S/MIME only) -# -# Note: On Debian systems, this defaults to the first existing file in -# the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt -# /etc/ssl/certs/ca-certificates.crt. -# -# -# set smime_certificates="" -# -# Name: smime_certificates -# Type: path -# Default: "" -# -# -# Since there is no pubring/secring as with PGP, mutt has to handle -# storage and retrieval of keys by itself. This is very basic right -# now, and keys and certificates are stored in two different -# directories, both named as the hash-value retrieved from -# OpenSSL. There is an index file which contains mailbox-address -# keyid pairs, and which can be manually edited. This one points to -# the location of the certificates. -# (S/MIME only) -# -set smime_certificates="~/.smime/certificates" -# -# set smime_decrypt_command="" -# -# Name: smime_decrypt_command -# Type: string -# Default: "" -# -# -# This format string specifies a command which is used to decrypt -# application/x-pkcs7-mime attachments. -# -# The OpenSSL command formats have their own set of printf-like sequences -# similar to PGP's: -# -# %f Expands to the name of a file containing a message. -# %s Expands to the name of a file containing the signature part -# of a multipart/signed attachment when verifying it. -# %k The key-pair specified with $smime_default_key -# %c One or more certificate IDs. -# %a The algorithm used for encryption. -# %C CA location: Depending on whether $smime_ca_location -# points to a directory or file, this expands to -# "-CApath $smime_ca_location" or "-CAfile $smime_ca_location". -# -# -# For examples on how to configure these formats, see the smime.rc in -# the samples/ subdirectory which has been installed on your system -# alongside the documentation. -# (S/MIME only) -# -# -# set smime_verify_command="" -# -# Name: smime_verify_command -# Type: string -# Default: "" -# -# -# This command is used to verify S/MIME signatures of type multipart/signed. -# (S/MIME only) -# -# -# set smime_verify_opaque_command="" -# -# Name: smime_verify_opaque_command -# Type: string -# Default: "" -# -# -# This command is used to verify S/MIME signatures of type -# application/x-pkcs7-mime. -# (S/MIME only) -# -# -# set smime_sign_command="" -# -# Name: smime_sign_command -# Type: string -# Default: "" -# -# -# This command is used to created S/MIME signatures of type -# multipart/signed, which can be read by all mail clients. -# (S/MIME only) -# -# -# set smime_sign_opaque_command="" -# -# Name: smime_sign_opaque_command -# Type: string -# Default: "" -# -# -# This command is used to created S/MIME signatures of type -# application/x-pkcs7-signature, which can only be handled by mail -# clients supporting the S/MIME extension. -# (S/MIME only) -# -# -# set smime_encrypt_command="" -# -# Name: smime_encrypt_command -# Type: string -# Default: "" -# -# -# This command is used to create encrypted S/MIME messages. -# (S/MIME only) -# -# -# set smime_pk7out_command="" -# -# Name: smime_pk7out_command -# Type: string -# Default: "" -# -# -# This command is used to extract PKCS7 structures of S/MIME signatures, -# in order to extract the public X509 certificate(s). -# (S/MIME only) -# -# -# set smime_get_cert_command="" -# -# Name: smime_get_cert_command -# Type: string -# Default: "" -# -# -# This command is used to extract X509 certificates from a PKCS7 structure. -# (S/MIME only) -# -# -# set smime_get_signer_cert_command="" -# -# Name: smime_get_signer_cert_command -# Type: string -# Default: "" -# -# -# This command is used to extract only the signers X509 certificate from a S/MIME -# signature, so that the certificate's owner may get compared to the -# email's 'From'-field. -# (S/MIME only) -# -# -# set smime_import_cert_command="" -# -# Name: smime_import_cert_command -# Type: string -# Default: "" -# -# -# This command is used to import a certificate via smime_keys. -# (S/MIME only) -# -# -# set smime_get_cert_email_command="" -# -# Name: smime_get_cert_email_command -# Type: string -# Default: "" -# -# -# This command is used to extract the mail address(es) used for storing -# X509 certificates, and for verification purposes (to check whether the -# certificate was issued for the sender's mailbox). -# (S/MIME only) -# -# -# set smime_default_key="" -# -# Name: smime_default_key -# Type: string -# Default: "" -# -# -# This is the default key-pair to use for signing. This must be set to the -# keyid (the hash-value that OpenSSL generates) to work properly -# (S/MIME only) -# -set smime_default_key="a350124a.0" -# -# set ssl_force_tls=no -# -# Name: ssl_force_tls -# Type: boolean -# Default: no -# -# -# If this variable is set, Mutt will require that all connections -# to remote servers be encrypted. Furthermore it will attempt to -# negotiate TLS even if the server does not advertise the capability, -# since it would otherwise have to abort the connection anyway. This -# option supersedes ``$ssl_starttls''. -# -# -# set ssl_starttls=yes -# -# Name: ssl_starttls -# Type: quadoption -# Default: yes -# -# -# If set (the default), mutt will attempt to use STARTTLS on servers -# advertising the capability. When unset, mutt will not attempt to -# use STARTTLS regardless of the server's capabilities. -# -# -# set certificate_file="~/.mutt_certificates" -# -# Name: certificate_file -# Type: path -# Default: "~/.mutt_certificates" -# -# -# This variable specifies the file where the certificates you trust -# are saved. When an unknown certificate is encountered, you are asked -# if you accept it or not. If you accept it, the certificate can also -# be saved in this file and further connections are automatically -# accepted. -# -# You can also manually add CA certificates in this file. Any server -# certificate that is signed with one of these CA certificates are -# also automatically accepted. -# -# Example: set certificate_file=~/.mutt/certificates -# -# -# set ssl_use_sslv3=yes -# -# Name: ssl_use_sslv3 -# Type: boolean -# Default: yes -# -# -# This variables specifies whether to attempt to use SSLv3 in the -# SSL authentication process. -# -# -# set ssl_use_tlsv1=yes -# -# Name: ssl_use_tlsv1 -# Type: boolean -# Default: yes -# -# -# This variables specifies whether to attempt to use TLSv1 in the -# SSL authentication process. -# -# -# set ssl_min_dh_prime_bits=0 -# -# Name: ssl_min_dh_prime_bits -# Type: number -# Default: 0 -# -# -# This variable specifies the minimum acceptable prime size (in bits) -# for use in any Diffie-Hellman key exchange. A value of 0 will use -# the default from the GNUTLS library. -# -# -# set ssl_ca_certificates_file="" -# -# Name: ssl_ca_certificates_file -# Type: path -# Default: "" -# -# -# This variable specifies a file containing trusted CA certificates. -# Any server certificate that is signed with one of these CA -# certificates are also automatically accepted. -# -# Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt -# -# Note: On Debian systems, this variable defaults to the example -# mentioned. This file is managed by the ``ca-certificates'' package. -# -# -# set pipe_split=no -# -# Name: pipe_split -# Type: boolean -# Default: no -# -# -# Used in connection with the pipe-message command and the ``tag- -# prefix'' operator. If this variable is unset, when piping a list of -# tagged messages Mutt will concatenate the messages and will pipe them -# as a single folder. When set, Mutt will pipe the messages one by one. -# In both cases the messages are piped in the current sorted order, -# and the ``$pipe_sep'' separator is added after each message. -# -# -# set pipe_decode=no -# -# Name: pipe_decode -# Type: boolean -# Default: no -# -# -# Used in connection with the pipe-message command. When unset, -# Mutt will pipe the messages without any preprocessing. When set, Mutt -# will weed headers and will attempt to PGP/MIME decode the messages -# first. -# -set pipe_decode -# -# set pipe_sep="\n" -# -# Name: pipe_sep -# Type: string -# Default: "\n" -# -# -# The separator to add between messages when piping a list of tagged -# messages to an external Unix command. -# -# -# set pop_authenticators="" -# -# Name: pop_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an POP server, in the order mutt should -# try them. Authentication methods are either 'user', 'apop' or any -# SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'. -# This parameter is case-insensitive. If this parameter is unset -# (the default) mutt will try all available methods, in order from -# most-secure to least-secure. -# -# Example: set pop_authenticators="digest-md5:apop:user" -# -# -# set pop_auth_try_all=yes -# -# Name: pop_auth_try_all -# Type: boolean -# Default: yes -# -# -# If set, Mutt will try all available methods. When unset, Mutt will -# only fall back to other authentication methods if the previous -# methods are unavailable. If a method is available but authentication -# fails, Mutt will not connect to the POP server. -# -# -# set pop_checkinterval=60 -# -# Name: pop_checkinterval -# Type: number -# Default: 60 -# -# -# This variable configures how often (in seconds) mutt should look for -# new mail in the currently selected mailbox if it is a POP mailbox. -# -# -# set pop_delete=ask-no -# -# Name: pop_delete -# Type: quadoption -# Default: ask-no -# -# -# If set, Mutt will delete successfully downloaded messages from the POP -# server when using the fetch-mail function. When unset, Mutt will -# download messages but also leave them on the POP server. -# -# -# set pop_host="" -# -# Name: pop_host -# Type: string -# Default: "" -# -# -# The name of your POP server for the fetch-mail function. You -# can also specify an alternative port, username and password, ie: -# -# [pop[s]://][username[:password]@]popserver[:port] -# -# -# set pop_last=no -# -# Name: pop_last -# Type: boolean -# Default: no -# -# -# If this variable is set, mutt will try to use the "LAST" POP command -# for retrieving only unread messages from the POP server when using -# the fetch-mail function. -# -# -# set pop_reconnect=ask-yes -# -# Name: pop_reconnect -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not Mutt will try to reconnect to POP server if -# the connection is lost. -# -# -# set pop_user="" -# -# Name: pop_user -# Type: string -# Default: "" -# -# -# Your login name on the POP server. -# -# This variable defaults to your user name on the local machine. -# -# -# set pop_pass="" -# -# Name: pop_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your POP account. If unset, Mutt will -# prompt you for your password when you open POP mailbox. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc -# even if you are the only one who can read the file. -# -# -# set post_indent_string="" -# -# Name: post_indent_string -# Type: string -# Default: "" -# -# -# Similar to the ``$attribution'' variable, Mutt will append this -# string after the inclusion of a message which is being replied to. -# -# -# set postpone=ask-yes -# -# Name: postpone -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not messages are saved in the ``$postponed'' -# mailbox when you elect not to send immediately. Also see the -# ``$recall'' variable. -# -# -# set postponed="~/postponed" -# -# Name: postponed -# Type: path -# Default: "~/postponed" -# -# -# Mutt allows you to indefinitely ``postpone sending a message'' which -# you are editing. When you choose to postpone a message, Mutt saves it -# in the mailbox specified by this variable. Also see the ``$postpone'' -# variable. -# -set postponed="=drafts" -# -# set preconnect="" -# -# Name: preconnect -# Type: string -# Default: "" -# -# -# If set, a shell command to be executed if mutt fails to establish -# a connection to the server. This is useful for setting up secure -# connections, e.g. with ssh(1). If the command returns a nonzero -# status, mutt gives up opening the server. Example: -# -# preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net -# sleep 20 < /dev/null > /dev/null" -# -# Mailbox 'foo' on mailhost.net can now be reached -# as '{localhost:1234}foo'. -# -# NOTE: For this example to work, you must be able to log in to the -# remote machine without having to enter a password. -# -# -# set print=ask-no -# -# Name: print -# Type: quadoption -# Default: ask-no -# -# -# Controls whether or not Mutt really prints messages. -# This is set to ask-no by default, because some people -# accidentally hit ``p'' often (like me). -# -# -# set print_command="lpr" -# -# Name: print_command -# Type: path -# Default: "lpr" -# -# -# This specifies the command pipe that should be used to print messages. - -#set print_command="iconv -s -tlatin1//TRANSLIT | a2ps -=mail -Xlatin1 --title='%D{%Y.%m.%d.%H%M%S}-\$t2-\$t1' -B --borders=no --header='\$t2: \$t1' --left-footer='#?l!%E!#?v|%E|%s./%s#|!' --right-footer='#?l!%s./%s#!#?v|%s./%s#|%E|!' -cl100 -1qP cupspdf" -set print_command="muttprint" - -# -# set print_decode=yes -# -# Name: print_decode -# Type: boolean -# Default: yes -# -# -# Used in connection with the print-message command. If this -# option is set, the message is decoded before it is passed to the -# external command specified by $print_command. If this option -# is unset, no processing will be applied to the message when -# printing it. The latter setting may be useful if you are using -# some advanced printer filter which is able to properly format -# e-mail messages for printing. -# -# -# set print_split=no -# -# Name: print_split -# Type: boolean -# Default: no -# -# -# Used in connection with the print-message command. If this option -# is set, the command specified by $print_command is executed once for -# each message which is to be printed. If this option is unset, -# the command specified by $print_command is executed only once, and -# all the messages are concatenated, with a form feed as the message -# separator. -# -# Those who use the enscript(1) program's mail-printing mode will -# most likely want to set this option. -# -set print_split=yes -# -# set prompt_after=yes -# -# Name: prompt_after -# Type: boolean -# Default: yes -# -# -# If you use an external ``$pager'', setting this variable will -# cause Mutt to prompt you for a command when the pager exits rather -# than returning to the index menu. If unset, Mutt will return to the -# index menu when the external pager exits. -# -# -# set query_command="" -# -# Name: query_command -# Type: path -# Default: "" -# -# -# This specifies the command that mutt will use to make external address -# queries. The string should contain a %s, which will be substituted -# with the query string the user types. See ``query'' for more -# information. -# -set query_command="lbdbq" -# -# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?" -# -# Name: query_format -# Type: string -# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?" -# -# -# This variable describes the format of the `query' menu. The -# following printf-style sequences are understood: -# -# %a destination address -# %c current entry number -# %e extra information * -# %n destination name -# %t ``*'' if current entry is tagged, a space otherwise -# %>X right justify the rest of the string and pad with "X" -# %|X pad to the end of the line with "X" -# %*X soft-fill with character "X" as pad -# -# -# For an explanation of `soft-fill', see the ``$index_format'' documentation. -# -# * = can be optionally printed if nonzero, see the ``$status_format'' documentation. -# -# -# set quit=yes -# -# Name: quit -# Type: quadoption -# Default: yes -# -# -# This variable controls whether ``quit'' and ``exit'' actually quit -# from mutt. If it set to yes, they do quit, if it is set to no, they -# have no effect, and if it is set to ask-yes or ask-no, you are -# prompted for confirmation when you try to quit. -# -# -# set quote_regexp="^([ \t]*[|>:}#])+" -# -# Name: quote_regexp -# Type: regular expression -# Default: "^([ \t]*[|>:}#])+" -# -# -# A regular expression used in the internal-pager to determine quoted -# sections of text in the body of a message. -# -# Note: In order to use the quotedx patterns in the -# internal pager, you need to set this to a regular expression that -# matches exactly the quote characters at the beginning of quoted -# lines. -# -# -# set read_inc=10 -# -# Name: read_inc -# Type: number -# Default: 10 -# -# -# If set to a value greater than 0, Mutt will display which message it -# is currently on when reading a mailbox or when performing search actions -# such as search and limit. The message is printed after -# read_inc messages have been read or searched (e.g., if set to 25, Mutt will -# print a message when it is at message 25, and then again when it gets -# to message 50). This variable is meant to indicate progress when -# reading or searching large mailboxes which may take some time. -# When set to 0, only a single message will appear before the reading -# the mailbox. -# -# Also see the ``$write_inc'' variable and the ``Tuning'' section of the -# manual for performance considerations. -# -# -# set read_only=no -# -# Name: read_only -# Type: boolean -# Default: no -# -# -# If set, all folders are opened in read-only mode. -# -# -# set realname="" -# -# Name: realname -# Type: string -# Default: "" -# -# -# This variable specifies what "real" or "personal" name should be used -# when sending messages. -# -# By default, this is the GECOS field from /etc/passwd. Note that this -# variable will not be used when the user has set a real name -# in the $from variable. -# -# -# set recall=ask-yes -# -# Name: recall -# Type: quadoption -# Default: ask-yes -# -# -# Controls whether or not Mutt recalls postponed messages -# when composing a new message. Also see ``$postponed''. -# -# Setting this variable to ``yes'' is not generally useful, and thus not -# recommended. -# -set recall=no -# -# set record="~/sent" -# -# Name: record -# Type: path -# Default: "~/sent" -# -# -# This specifies the file into which your outgoing messages should be -# appended. (This is meant as the primary method for saving a copy of -# your messages, but another way to do this is using the ``my_hdr'' -# command to create a Bcc: field with your email address in it.) -# -# The value of $record is overridden by the ``$force_name'' and -# ``$save_name'' variables, and the ``fcc-hook'' command. -# -#set record="=outgoing" -set record="=store" -# -# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*" -# -# Name: reply_regexp -# Type: regular expression -# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*" -# -# -# A regular expression used to recognize reply messages when threading -# and replying. The default value corresponds to the English "Re:" and -# the German "Aw:". -# -set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+" -# -# set reply_self=no -# -# Name: reply_self -# Type: boolean -# Default: no -# -# -# If unset and you are replying to a message sent by you, Mutt will -# assume that you want to reply to the recipients of that message rather -# than to yourself. -# -# -# set reply_to=ask-yes -# -# Name: reply_to -# Type: quadoption -# Default: ask-yes -# -# -# If set, when replying to a message, Mutt will use the address listed -# in the Reply-to: header as the recipient of the reply. If unset, -# it will use the address in the From: header field instead. This -# option is useful for reading a mailing list that sets the Reply-To: -# header field to the list address and you want to send a private -# message to the author of a message. -# -# -# set resolve=yes -# -# Name: resolve -# Type: boolean -# Default: yes -# -# -# When set, the cursor will be automatically advanced to the next -# (possibly undeleted) message whenever a command that modifies the -# current message is executed. -# -# -# set reverse_alias=no -# -# Name: reverse_alias -# Type: boolean -# Default: no -# -# -# This variable controls whether or not Mutt will display the "personal" -# name from your aliases in the index menu if it finds an alias that -# matches the message's sender. For example, if you have the following -# alias: -# -# alias juser abd30425@somewhere.net (Joe User) -# -# and then you receive mail which contains the following header: -# -# From: abd30425@somewhere.net -# -# It would be displayed in the index menu as ``Joe User'' instead of -# ``abd30425@somewhere.net.'' This is useful when the person's e-mail -# address is not human friendly (like CompuServe addresses). -# -# -# set reverse_name=no -# -# Name: reverse_name -# Type: boolean -# Default: no -# -# -# It may sometimes arrive that you receive mail to a certain machine, -# move the messages to another machine, and reply to some the messages -# from there. If this variable is set, the default From: line of -# the reply messages is built using the address where you received the -# messages you are replying to if that address matches your -# alternates. If the variable is unset, or the address that would be -# used doesn't match your alternates, the From: line will use -# your address on the current machine. -# -set reverse_name=yes -# -# set reverse_realname=yes -# -# Name: reverse_realname -# Type: boolean -# Default: yes -# -# -# This variable fine-tunes the behaviour of the reverse_name feature. -# When it is set, mutt will use the address from incoming messages as-is, -# possibly including eventual real names. When it is unset, mutt will -# override any such real names with the setting of the realname variable. -# -# -# set rfc2047_parameters=no -# -# Name: rfc2047_parameters -# Type: boolean -# Default: no -# -# -# When this variable is set, Mutt will decode RFC-2047-encoded MIME -# parameters. You want to set this variable when mutt suggests you -# to save attachments to files named like this: -# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= -# -# When this variable is set interactively, the change doesn't have -# the desired effect before you have changed folders. -# -# Note that this use of RFC 2047's encoding is explicitly, -# prohibited by the standard, but nevertheless encountered in the -# wild. -# Also note that setting this parameter will not have the effect -# that mutt generates this kind of encoding. Instead, mutt will -# unconditionally use the encoding specified in RFC 2231. -# -set rfc2047_parameters=yes -# -# set save_address=no -# -# Name: save_address -# Type: boolean -# Default: no -# -# -# If set, mutt will take the sender's full address when choosing a -# default folder for saving a mail. If ``$save_name'' or ``$force_name'' -# is set too, the selection of the fcc folder will be changed as well. -# -# -# set save_empty=yes -# -# Name: save_empty -# Type: boolean -# Default: yes -# -# -# When unset, mailboxes which contain no saved messages will be removed -# when closed (the exception is ``$spoolfile'' which is never removed). -# If set, mailboxes are never removed. -# -# Note: This only applies to mbox and MMDF folders, Mutt does not -# delete MH and Maildir directories. -# -# -# set save_history=0 -# -# Name: save_history -# Type: number -# Default: 0 -# -# -# This variable controls the size of the history saved in the -# ``$history_file'' file. -# -set save_history=100 -# -# set save_name=no -# -# Name: save_name -# Type: boolean -# Default: no -# -# -# This variable controls how copies of outgoing messages are saved. -# When set, a check is made to see if a mailbox specified by the -# recipient address exists (this is done by searching for a mailbox in -# the ``$folder'' directory with the username part of the -# recipient address). If the mailbox exists, the outgoing message will -# be saved to that mailbox, otherwise the message is saved to the -# ``$record'' mailbox. -# -# Also see the ``$force_name'' variable. -# -# -# set score=yes -# -# Name: score -# Type: boolean -# Default: yes -# -# -# When this variable is unset, scoring is turned off. This can -# be useful to selectively disable scoring for certain folders when the -# ``$score_threshold_delete'' variable and friends are used. -# -# -# set score_threshold_delete=-1 -# -# Name: score_threshold_delete -# Type: number -# Default: -1 -# -# -# Messages which have been assigned a score equal to or lower than the value -# of this variable are automatically marked for deletion by mutt. Since -# mutt scores are always greater than or equal to zero, the default setting -# of this variable will never mark a message for deletion. -# -# -# set score_threshold_flag=9999 -# -# Name: score_threshold_flag -# Type: number -# Default: 9999 -# -# -# Messages which have been assigned a score greater than or equal to this -# variable's value are automatically marked "flagged". -# -# -# set score_threshold_read=-1 -# -# Name: score_threshold_read -# Type: number -# Default: -1 -# -# -# Messages which have been assigned a score equal to or lower than the value -# of this variable are automatically marked as read by mutt. Since -# mutt scores are always greater than or equal to zero, the default setting -# of this variable will never mark a message read. -# -# -# set send_charset="us-ascii:iso-8859-1:utf-8" -# -# Name: send_charset -# Type: string -# Default: "us-ascii:iso-8859-1:utf-8" -# -# -# A colon-delimited list of character sets for outgoing messages. Mutt will use the -# first character set into which the text can be converted exactly. -# If your ``$charset'' is not iso-8859-1 and recipients may not -# understand UTF-8, it is advisable to include in the list an -# appropriate widely used standard character set (such as -# iso-8859-2, koi8-r or iso-2022-jp) either instead of or after -# "iso-8859-1". -# -# In case the text cannot be converted into one of these exactly, -# mutt uses ``$charset'' as a fallback. -# -# -# set sendmail="/usr/sbin/sendmail -oem -oi" -# -# Name: sendmail -# Type: path -# Default: "/usr/sbin/sendmail -oem -oi" -# -# -# Specifies the program and arguments used to deliver mail sent by Mutt. -# Mutt expects that the specified program interprets additional -# arguments as recipient addresses. -# -#set sendmail="/bin/true" -set sendmail="$my_confdir/sendmail" -#set sendmail="/usr/sbin/sendmail -oem -oi" -# -# set sendmail_wait=0 -# -# Name: sendmail_wait -# Type: number -# Default: 0 -# -# -# Specifies the number of seconds to wait for the ``$sendmail'' process -# to finish before giving up and putting delivery in the background. -# -# Mutt interprets the value of this variable as follows: -# >0 number of seconds to wait for sendmail to finish before continuing -# 0 wait forever for sendmail to finish -# <0 always put sendmail in the background without waiting -# -# -# Note that if you specify a value other than 0, the output of the child -# process will be put in a temporary file. If there is some error, you -# will be informed as to where to find the output. -# -# -# set shell="" -# -# Name: shell -# Type: path -# Default: "" -# -# -# Command to use when spawning a subshell. By default, the user's login -# shell from /etc/passwd is used. -# -# -# set sig_dashes=yes -# -# Name: sig_dashes -# Type: boolean -# Default: yes -# -# -# If set, a line containing ``-- '' will be inserted before your -# ``$signature''. It is strongly recommended that you not unset -# this variable unless your ``signature'' contains just your name. The -# reason for this is because many software packages use ``-- \n'' to -# detect your signature. For example, Mutt has the ability to highlight -# the signature in a different color in the builtin pager. -# -set sig_dashes=no -# -# set sig_on_top=no -# -# Name: sig_on_top -# Type: boolean -# Default: no -# -# -# If set, the signature will be included before any quoted or forwarded -# text. It is strongly recommended that you do not set this variable -# unless you really know what you are doing, and are prepared to take -# some heat from netiquette guardians. -# -# -# set signature="~/.signature" -# -# Name: signature -# Type: path -# Default: "~/.signature" -# -# -# Specifies the filename of your signature, which is appended to all -# outgoing messages. If the filename ends with a pipe (``|''), it is -# assumed that filename is a shell command and input should be read from -# its stdout. -# -#set signature="~/.mutt/getsignature|" -# -# set simple_search="~f %s | ~s %s" -# -# Name: simple_search -# Type: string -# Default: "~f %s | ~s %s" -# -# -# Specifies how Mutt should expand a simple search into a real search -# pattern. A simple search is one that does not contain any of the ~ -# operators. See ``patterns'' for more information on search patterns. -# -# For example, if you simply type joe at a search or limit prompt, Mutt -# will automatically expand it to the value specified by this variable. -# For the default value it would be: -# -# ~f joe | ~s joe -set simple_search="~L %s | ~s %s" -# -# set smart_wrap=yes -# -# Name: smart_wrap -# Type: boolean -# Default: yes -# -# -# Controls the display of lines longer than the screen width in the -# internal pager. If set, long lines are wrapped at a word boundary. If -# unset, lines are simply wrapped at the screen edge. Also see the -# ``$markers'' variable. -# -# -# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])" -# -# Name: smileys -# Type: regular expression -# Default: "(>From )|(:[-^]?[][)(><}{|/DP])" -# -# -# The pager uses this variable to catch some common false -# positives of ``$quote_regexp'', most notably smileys in the beginning -# of a line -# -# -# set sleep_time=1 -# -# Name: sleep_time -# Type: number -# Default: 1 -# -# -# Specifies time, in seconds, to pause while displaying certain informational -# messages, while moving from folder to folder and after expunging -# messages from the current folder. The default is to pause one second, so -# a value of zero for this option suppresses the pause. -# -# -# set smtp_authenticators="" -# -# Name: smtp_authenticators -# Type: string -# Default: "" -# -# -# This is a colon-delimited list of authentication methods mutt may -# attempt to use to log in to an SMTP server, in the order mutt should -# try them. Authentication methods are any SASL mechanism, eg -# ``digest-md5'', ``gssapi'' or ``cram-md5''. -# This parameter is case-insensitive. If this parameter is unset -# (the default) mutt will try all available methods, in order from -# most-secure to least-secure. -# -# Example: set smtp_authenticators="digest-md5:cram-md5" -# -# -# set smtp_pass="" -# -# Name: smtp_pass -# Type: string -# Default: "" -# -# -# Specifies the password for your SMTP account. If unset, Mutt will -# prompt you for your password when you first send mail via SMTP. -# See ``smtp_url'' to configure mutt to send mail via SMTP. -# Warning: you should only use this option when you are on a -# fairly secure machine, because the superuser can read your muttrc even -# if you are the only one who can read the file. -# -# -# set smtp_url="" -# -# Name: smtp_url -# Type: string -# Default: "" -# -# -# Defines the SMTP ``smart'' host where sent messages should relayed for -# delivery. This should take the form of an SMTP URL, eg: -# -# smtp[s]://[user[:pass]@]host[:port]/ -# -# Setting this variable overrides the value of the ``$sendmail'' -# variable. -# -# -# set sort=date -# -# Name: sort -# Type: sort order -# Default: date -# -# -# Specifies how to sort messages in the index menu. Valid values -# are: -# -# date or date-sent -# date-received -# from -# mailbox-order (unsorted) -# score -# size -# spam -# subject -# threads -# to -# -# You may optionally use the reverse- prefix to specify reverse sorting -# order (example: set sort=reverse-date-sent). -# -# Note: On Debian systems, this option is set by default to -# ``threads'' in /etc/Muttrc. -# -set sort=threads -# -# set sort_alias=alias -# -# Name: sort_alias -# Type: sort order -# Default: alias -# -# -# Specifies how the entries in the `alias' menu are sorted. The -# following are legal values: -# -# address (sort alphabetically by email address) -# alias (sort alphabetically by alias name) -# unsorted (leave in order specified in .muttrc) -# -# -# set sort_aux=date -# -# Name: sort_aux -# Type: sort order -# Default: date -# -# -# When sorting by threads, this variable controls how threads are sorted -# in relation to other threads, and how the branches of the thread trees -# are sorted. This can be set to any value that ``$sort'' can, except -# threads (in that case, mutt will just use date-sent). You can also -# specify the last- prefix in addition to the reverse- prefix, but last- -# must come after reverse-. The last- prefix causes messages to be -# sorted against its siblings by which has the last descendant, using -# the rest of sort_aux as an ordering. For instance, set sort_aux=last- -# date-received would mean that if a new message is received in a -# thread, that thread becomes the last one displayed (or the first, if -# you have set sort=reverse-threads.) Note: For reversed ``$sort'' -# order $sort_aux is reversed again (which is not the right thing to do, -# but kept to not break any existing configuration setting). -# -set sort_aux=last-date-received -# -# set sort_browser=alpha -# -# Name: sort_browser -# Type: sort order -# Default: alpha -# -# -# Specifies how to sort entries in the file browser. By default, the -# entries are sorted alphabetically. Valid values: -# -# alpha (alphabetically) -# date -# size -# unsorted -# -# You may optionally use the reverse- prefix to specify reverse sorting -# order (example: set sort_browser=reverse-date). -# -# -# set sort_re=yes -# -# Name: sort_re -# Type: boolean -# Default: yes -# -# -# This variable is only useful when sorting by threads with -# ``$strict_threads'' unset. In that case, it changes the heuristic -# mutt uses to thread messages by subject. With sort_re set, mutt will -# only attach a message as the child of another message by subject if -# the subject of the child message starts with a substring matching the -# setting of ``$reply_regexp''. With sort_re unset, mutt will attach -# the message whether or not this is the case, as long as the -# non-``$reply_regexp'' parts of both messages are identical. -# -# -# set spam_separator="," -# -# Name: spam_separator -# Type: string -# Default: "," -# -# -# ``spam_separator'' controls what happens when multiple spam headers -# are matched: if unset, each successive header will overwrite any -# previous matches value for the spam label. If set, each successive -# match will append to the previous, using ``spam_separator'' as a -# separator. -# -# -# set spoolfile="" -# -# Name: spoolfile -# Type: path -# Default: "" -# -# -# If your spool mailbox is in a non-default place where Mutt cannot find -# it, you can specify its location with this variable. Mutt will -# automatically set this variable to the value of the environment -# variable $MAIL if it is not set. -# -set spoolfile="=inbox" -# -# set status_chars="-*%A" -# -# Name: status_chars -# Type: string -# Default: "-*%A" -# -# -# Controls the characters used by the "%r" indicator in -# ``$status_format''. The first character is used when the mailbox is -# unchanged. The second is used when the mailbox has been changed, and -# it needs to be resynchronized. The third is used if the mailbox is in -# read-only mode, or if the mailbox will not be written when exiting -# that mailbox (You can toggle whether to write changes to a mailbox -# with the toggle-write operation, bound by default to "%"). The fourth -# is used to indicate that the current folder has been opened in attach- -# message mode (Certain operations like composing a new mail, replying, -# forwarding, etc. are not permitted in this mode). -# -# -# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" -# -# Name: status_format -# Type: string -# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" -# -# -# Controls the format of the status line displayed in the index -# menu. This string is similar to ``$index_format'', but has its own -# set of printf()-like sequences: -# -# %b number of mailboxes with new mail * -# %d number of deleted messages * -# %f the full pathname of the current mailbox -# %F number of flagged messages * -# %h local hostname -# %l size (in bytes) of the current mailbox * -# %L size (in bytes) of the messages shown -# (i.e., which match the current limit) * -# %m the number of messages in the mailbox * -# %M the number of messages shown (i.e., which match the current limit) * -# %n number of new messages in the mailbox * -# %o number of old unread messages * -# %p number of postponed messages * -# %P percentage of the way through the index -# %r modified/read-only/won't-write/attach-message indicator, -# according to $status_chars -# %s current sorting mode ($sort) -# %S current aux sorting method ($sort_aux) -# %t number of tagged messages * -# %u number of unread messages * -# %v Mutt version string -# %V currently active limit pattern, if any * -# %>X right justify the rest of the string and pad with "X" -# %|X pad to the end of the line with "X" -# %*X soft-fill with character "X" as pad -# -# -# For an explanation of `soft-fill', see the ``$index_format'' documentation. -# -# * = can be optionally printed if nonzero -# -# Some of the above sequences can be used to optionally print a string -# if their value is nonzero. For example, you may only want to see the -# number of flagged messages if such messages exist, since zero is not -# particularly meaningful. To optionally print a string based upon one -# of the above sequences, the following construct is used: -# -# %??? -# -# where sequence_char is a character from the table above, and -# optional_string is the string you would like printed if -# sequence_char is nonzero. optional_string may contain -# other sequences as well as normal text, but you may not nest -# optional strings. -# -# Here is an example illustrating how to optionally print the number of -# new messages in a mailbox: -# %?n?%n new messages.? -# -# You can also switch between two strings using the following construct: -# -# %??&? -# -# If the value of sequence_char is non-zero, if_string will -# be expanded, otherwise else_string will be expanded. -# -# You can force the result of any printf-like sequence to be lowercase -# by prefixing the sequence character with an underscore (_) sign. -# For example, if you want to display the local hostname in lowercase, -# you would use: -# %_h -# -# If you prefix the sequence character with a colon (:) character, mutt -# will replace any dots in the expansion by underscores. This might be helpful -# with IMAP folders that don't like dots in folder names. -# -set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) " -# -# set status_on_top=no -# -# Name: status_on_top -# Type: boolean -# Default: no -# -# -# Setting this variable causes the ``status bar'' to be displayed on -# the first line of the screen rather than near the bottom. -# -# -# set strict_threads=no -# -# Name: strict_threads -# Type: boolean -# Default: no -# -# -# If set, threading will only make use of the ``In-Reply-To'' and -# ``References'' fields when you ``$sort'' by message threads. By -# default, messages with the same subject are grouped together in -# ``pseudo threads.''. This may not always be desirable, such as in a -# personal mailbox where you might have several unrelated messages with -# the subject ``hi'' which will get grouped together. See also -# ``$sort_re'' for a less drastic way of controlling this -# behaviour. -# -set strict_threads=yes -# -# set suspend=yes -# -# Name: suspend -# Type: boolean -# Default: yes -# -# -# When unset, mutt won't stop when the user presses the terminal's -# susp key, usually ``control-Z''. This is useful if you run mutt -# inside an xterm using a command like xterm -e mutt. -# -# -# set text_flowed=no -# -# Name: text_flowed -# Type: boolean -# Default: no -# -# -# When set, mutt will generate text/plain; format=flowed attachments. -# This format is easier to handle for some mailing software, and generally -# just looks like ordinary text. To actually make use of this format's -# features, you'll need support in your editor. -# -# Note that $indent_string is ignored when this option is set. -# -set text_flowed=yes -# -# set thread_received=no -# -# Name: thread_received -# Type: boolean -# Default: no -# -set thread_received=yes -# -# When set, mutt uses the date received rather than the date sent -# to thread messages by subject. -# -# -# set thorough_search=no -# -# Name: thorough_search -# Type: boolean -# Default: no -# -# -# Affects the ~b and ~h search operations described in -# section ``patterns'' above. If set, the headers and attachments of -# messages to be searched are decoded before searching. If unset, -# messages are searched as they appear in the folder. -# -set thorough_search=yes -# -# set tilde=no -# -# Name: tilde -# Type: boolean -# Default: no -# -# -# When set, the internal-pager will pad blank lines to the bottom of the -# screen with a tilde (~). -# -set tilde=yes -# -# set time_inc=0 -# -# Name: time_inc -# Type: number -# Default: 0 -# -# -# Along with ``read_inc'', ``write_inc'', and ``net_inc'', this -# variable controls the frequency with which progress updates are -# displayed. It suppresses updates less than ``time_inc'' milliseconds -# apart. This can improve throughput on systems with slow terminals, -# or when running mutt on a remote system. -# -# -# set timeout=600 -# -# Name: timeout -# Type: number -# Default: 600 -# -# -# When Mutt is waiting for user input either idleing in menus or -# in an interactive prompt, Mutt would block until input is -# present. Depending on the context, this would prevent certain -# operations from working, like checking for new mail or keeping -# an IMAP connection alive. -# -# This variable controls how many seconds Mutt will at most wait -# until it aborts waiting for input, performs these operations and -# continues to wait for input. -# -# A value of zero or less will cause Mutt to never time out. -# -# -# set tmpdir="" -# -# Name: tmpdir -# Type: path -# Default: "" -# -# -# This variable allows you to specify where Mutt will place its -# temporary files needed for displaying and composing messages. If -# this variable is not set, the environment variable TMPDIR is -# used. If TMPDIR is not set then "/tmp" is used. -# -# -# set to_chars=" +TCFL" -# -# Name: to_chars -# Type: string -# Default: " +TCFL" -# -# -# Controls the character used to indicate mail addressed to you. The -# first character is the one used when the mail is NOT addressed to your -# address (default: space). The second is used when you are the only -# recipient of the message (default: +). The third is when your address -# appears in the TO header field, but you are not the only recipient of -# the message (default: T). The fourth character is used when your -# address is specified in the CC header field, but you are not the only -# recipient. The fifth character is used to indicate mail that was sent -# by you. The sixth character is used to indicate when a mail -# was sent to a mailing-list you subscribe to (default: L). -# -# -# set trash="" -# -# Name: trash -# Type: path -# Default: "" -# -# -# If set, this variable specifies the path of the trash folder where the -# mails marked for deletion will be moved, instead of being irremediably -# purged. -# -# NOTE: When you delete a message in the trash folder, it is really -# deleted, so that you have a way to clean the trash. -# -# -# set tunnel="" -# -# Name: tunnel -# Type: string -# Default: "" -# -# -# Setting this variable will cause mutt to open a pipe to a command -# instead of a raw socket. You may be able to use this to set up -# preauthenticated connections to your IMAP/POP3 server. Example: -# -# tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" -# -# NOTE: For this example to work you must be able to log in to the remote -# machine without having to enter a password. -# -# -# set use_8bitmime=no -# -# Name: use_8bitmime -# Type: boolean -# Default: no -# -# -# Warning: do not set this variable unless you are using a version -# of sendmail which supports the -B8BITMIME flag (such as sendmail -# 8.8.x) or you may not be able to send mail. -# -# When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME -# flag when sending 8-bit messages to enable ESMTP negotiation. -# -# -# set use_domain=yes -# -# Name: use_domain -# Type: boolean -# Default: yes -# -# -# When set, Mutt will qualify all local addresses (ones without the -# @host portion) with the value of ``$hostname''. If unset, no -# addresses will be qualified. -# -# -# set use_envelope_from=no -# -# Name: use_envelope_from -# Type: boolean -# Default: no -# -# -# When set, mutt will set the envelope sender of the message. -# If ``$envelope_from_address'' is set, it will be used as the sender -# address. If not, mutt will attempt to derive the sender from the -# "From:" header. -# -# Note that this information is passed to sendmail command using the -# "-f" command line switch. Therefore setting this option is not useful -# if the ``$sendmail'' variable already contains "-f" or if the -# executable pointed to by $sendmail doesn't support the "-f" switch. -# -set use_envelope_from=yes -# -# set use_from=yes -# -# Name: use_from -# Type: boolean -# Default: yes -# -# -# When set, Mutt will generate the `From:' header field when -# sending messages. If unset, no `From:' header field will be -# generated unless the user explicitly sets one using the ``my_hdr'' -# command. -# -# -# set use_idn=yes -# -# Name: use_idn -# Type: boolean -# Default: yes -# -# -# When set, Mutt will show you international domain names decoded. -# Note: You can use IDNs for addresses even if this is unset. -# This variable only affects decoding. -# -# -# set use_ipv6=yes -# -# Name: use_ipv6 -# Type: boolean -# Default: yes -# -# -# When set, Mutt will look for IPv6 addresses of hosts it tries to -# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. -# Normally, the default should work. -# -# -# set user_agent=yes -# -# Name: user_agent -# Type: boolean -# Default: yes -# -# -# When set, mutt will add a "User-Agent" header to outgoing -# messages, indicating which version of mutt was used for composing -# them. -# -# -# set visual="" -# -# Name: visual -# Type: path -# Default: "" -# -# -# Specifies the visual editor to invoke when the ~v command is -# given in the builtin editor. -# -# -# set wait_key=yes -# -# Name: wait_key -# Type: boolean -# Default: yes -# -# -# Controls whether Mutt will ask you to press a key after shell- -# escape, pipe-message, pipe-entry, print-message, -# and print-entry commands. -# -# It is also used when viewing attachments with ``auto_view'', provided -# that the corresponding mailcap entry has a needsterminal flag, -# and the external program is interactive. -# -# When set, Mutt will always ask for a key. When unset, Mutt will wait -# for a key only if the external command returned a non-zero status. -# -set wait_key=no -# -# set weed=yes -# -# Name: weed -# Type: boolean -# Default: yes -# -# -# When set, mutt will weed headers when displaying, forwarding, -# printing, or replying to messages. -# -# -# set wrap=0 -# -# Name: wrap -# Type: number -# Default: 0 -# -# -# When set to a positive value, mutt will wrap text at $wrap characters. -# When set to a negative value, mutt will wrap text so that there are $wrap -# characters of empty space on the right side of the terminal. -# -set wrap=-10 -# -# set wrap_search=yes -# -# Name: wrap_search -# Type: boolean -# Default: yes -# -# -# Controls whether searches wrap around the end of the mailbox. -# -# When set, searches will wrap around the first (or last) message. When -# unset, searches will not wrap. -# -# -# set wrapmargin=0 -# -# Name: wrapmargin -# Type: number -# Default: 0 -# -# -# (DEPRECATED) Equivalent to setting wrap with a negative value. -# -# -# set write_inc=10 -# -# Name: write_inc -# Type: number -# Default: 10 -# -# -# When writing a mailbox, a message will be printed every -# write_inc messages to indicate progress. If set to 0, only a -# single message will be displayed before writing a mailbox. -# -# Also see the ``$read_inc'' variable. -# -# -# set write_bcc=yes -# -# Name: write_bcc -# Type: boolean -# Default: yes -# -# -# Controls whether mutt writes out the Bcc header when preparing -# messages to be sent. Exim users may wish to unset this. If mutt -# is set to deliver directly via SMTP (see ``$smtp_url''), this -# option does nothing: mutt will never write out the BCC header -# in this case. -# -# Note: On Debian systems, exim4 and postfix strip BCC headers by -# default. The above warning applies to exim3 users, see /etc/Muttrc. -# -# -# set xterm_icon="M%?n?AIL&ail?" -# -# Name: xterm_icon -# Type: string -# Default: "M%?n?AIL&ail?" -# -# -# Controls the format of the icon title, as long as xterm_set_titles -# is enabled. This string is identical in formatting to the one used by -# ``$status_format''. -# -# -# set xterm_set_titles=no -# -# Name: xterm_set_titles -# Type: boolean -# Default: no -# -# -# Controls whether mutt sets the xterm title bar and icon name -# (as long as you are in an appropriate terminal). -# -set xterm_set_titles=yes -# -# set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" -# -# Name: xterm_title -# Type: string -# Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?" -# -# -# Controls the format of the title bar of the xterm provided that -# xterm_set_titles has been set. This string is identical in formatting -# to the one used by ``$status_format''. -# -set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?" -# - auto_view text/html application/ics text/calendar #auto_view application/x-gunzip application/x-tar-gz application/x-tar application/x-gtar #auto_view application/postscript @@ -4575,19 +10,20 @@ alternative_order multipart/mixed multipart/related text/html text/enriched text #alternative_order text/enriched text/plain text application/postscript image/* mime_lookup application/octet-stream -source $my_confdir/colours -source $my_confdir/headers -source $my_confdir/alternates -source $my_confdir/keybindings -source $my_confdir/lists -source $my_confdir/spam -source $my_confdir/hooks +mailto_allow cc in-reply-to references subject body set my_mutt_mailboxes = "$VARDIR/mutt/mailboxes" source "test -f $my_mutt_mailboxes && cat $my_mutt_mailboxes|" -#source "$my_confdir/list-mailboxes $folder $spoolfile|" set alias_file="$my_confdir/aliases" source "test -f $alias_file && cat $alias_file 2>/dev/null || echo unset alias_file|" +source $my_confdir/colours +source $my_confdir/headers +source $my_confdir/alternates +source $my_confdir/keybindings +source $my_confdir/lists +source $my_confdir/spam +source $my_confdir/hooks source $my_confdir/sidebar +source $my_confdir/confvars diff --git a/.mutt/sidebar b/.mutt/sidebar index d32a4ca..39aebc2 100644 --- a/.mutt/sidebar +++ b/.mutt/sidebar @@ -1,11 +1,3 @@ -set sidebar_width=20 -set sidebar_visible=no -set sidebar_divider_char=" " -set sidebar_folder_indent=yes -set sidebar_short_path=yes -set sidebar_indent_string=" " -set sidebar_format="%B%?F? [%F]?%* %?N?%N/?%S" - bind index,pager sidebar-prev bind index,pager \e sidebar-prev bind index,pager sidebar-next