X-Git-Url: https://git.madduck.net/etc/vim.git/blobdiff_plain/a9f56e2ce0a97c79ed61cb536e141453c2f92975..b4bdf54aa166b991fbd49bf4b3a4d7009e035414:/README.md

diff --git a/README.md b/README.md
index 93b0d98..41629a1 100644
--- a/README.md
+++ b/README.md
@@ -47,39 +47,52 @@ tar --strip=1 -zxf vim-markdown-master.tar.gz
 
 ## Options
 
-**Disable Folding**
+### Disable Folding
 
-Add the following line to your `.vimrc` to disable folding.
+Add the following line to your `.vimrc` to disable the folding configuration:
 
 ```vim
 let g:vim_markdown_folding_disabled=1
 ```
 
-**Set Initial Foldlevel**
+This option only controls Vim Markdown specific folding configuration.
 
-Add the following line to your `.vimrc` to set the initial foldlevel. This option defaults to 0 (i.e. all folds are closed) and is ignored if folding is disabled.
+To enable/disable folding use Vim's standard folding configuration.
 
 ```vim
-let g:vim_markdown_initial_foldlevel=1
+set [no]foldenable
 ```
 
-**Disable Default Key Mappings**
+### Disable Default Key Mappings
 
-Add the following line to your `.vimrc` to disable default key mappings. You can map them by yourself with `<Plug>` mappings.
+Add the following line to your `.vimrc` to disable default key mappings:
 
 ```vim
 let g:vim_markdown_no_default_key_mappings=1
 ```
 
-**Syntax extensions**
+You can also map them by yourself with `<Plug>` mappings.
 
-The following options control which syntax extensions will be turned on.
+### Syntax extensions
 
-LaTeX math: `$ $`, `$$ $$`, escapable as `\$ \$` and `\$\$ \$\$`:
+The following options control which syntax extensions will be turned on. They are off by default.
+
+#### LaTeX math
+
+Used as `$x^2$`, `$$x^2$$`, escapable as `\$x\$` and `\$\$x\$\$`.
 
 ```vim
 let g:vim_markdown_math=1
 ```
+
+#### YAML frontmatter
+
+Highlight YAML frontmatter as used by Jekyll:
+
+```vim
+let g:vim_markdown_frontmatter=1
+```
+
 ## Mappings
 
 The following work on normal and visual modes:
@@ -93,7 +106,7 @@ The following work on normal and visual modes:
 
 ## Commands
 
-- `:HeaderDecrease`:
+-   `:HeaderDecrease`:
 
     Decrease level of all headers in buffer: `h2` to `h1`, `h3` to `h2`, etc.
 
@@ -103,30 +116,30 @@ The following work on normal and visual modes:
 
     For simplicity of implementation, Setex headers are converted to Atx.
 
-- `:HeaderIncrease`: Analogous to `:HeaderDecrease`, but increase levels instead.
+-   `:HeaderIncrease`: Analogous to `:HeaderDecrease`, but increase levels instead.
 
-- `:SetexToAtx`:
+-   `:SetexToAtx`:
 
     Convert all Setex style headers in buffer to Atx.
 
     If a range is given, e.g. hit `:` from visual mode, only operate on the range.
 
-- `:TableFormat`: Format the table under the cursor [like this](http://www.cirosantilli.com/markdown-styleguide/#tables).
+-   `:TableFormat`: Format the table under the cursor [like this](http://www.cirosantilli.com/markdown-styleguide/#tables).
 
     Requires [Tabular](https://github.com/godlygeek/tabular).
 
     The input table *must* already have a separator line as the second line of the table.
     That line only needs to contain the correct pipes `|`, nothing else is required.
 
-- `:Toc`: create a quickfix vertical window navigable table of contents with the headers.
+-   `:Toc`: create a quickfix vertical window navigable table of contents with the headers.
 
     Hit `<Enter>` on a line to jump to the corresponding line of the markdown file.
 
-- `:Toch`: Same as `:Toc` but in an horizontal window.
+-   `:Toch`: Same as `:Toc` but in an horizontal window.
 
-- `:Toct`: Same as `:Toc` but in a new tab.
+-   `:Toct`: Same as `:Toc` but in a new tab.
 
-- `:Tocv`: Same as `:Toc` for symmetry with `:Toch` and `Tocv`.
+-   `:Tocv`: Same as `:Toc` for symmetry with `:Toch` and `Tocv`.
 
 ## Credits