X-Git-Url: https://git.madduck.net/etc/vim.git/blobdiff_plain/e0562c8f61eb871f99192b66fbdccd5fbe60dcd2..c2e53f8cab69594b3fffbbdcbbe38acafdb7ca19:/indent/python.vim diff --git a/indent/python.vim b/indent/python.vim index 939968e..5da97e9 100644 --- a/indent/python.vim +++ b/indent/python.vim @@ -20,7 +20,7 @@ " . " Only load this indent file when no other was loaded. -if exists("b:did_indent") +if exists('b:did_indent') finish endif let b:did_indent = 1 @@ -34,7 +34,19 @@ if !exists('g:python_pep8_indent_multiline_string') let g:python_pep8_indent_multiline_string = 0 endif -let s:maxoff = 50 +if !exists('g:python_pep8_indent_hang_closing') + let g:python_pep8_indent_hang_closing = 0 +endif + +" TODO: check required patch for timeout argument, likely lower than 7.3.429 though. +if !exists('g:python_pep8_indent_searchpair_timeout') + if has('patch-8.0.1483') + let g:python_pep8_indent_searchpair_timeout = 150 + else + let g:python_pep8_indent_searchpair_timeout = 0 + endif +endif + let s:block_rules = { \ '^\s*elif\>': ['if', 'elif'], \ '^\s*except\>': ['try', 'except'], @@ -43,36 +55,45 @@ let s:block_rules = { let s:block_rules_multiple = { \ '^\s*else\>': ['if', 'elif', 'for', 'try', 'except'], \ } -let s:paren_pairs = ['()', '{}', '[]'] -if &ft == 'pyrex' || &ft == 'cython' +" Pairs to look for when searching for opening parenthesis. +" The value is the maximum offset in lines. +let s:paren_pairs = {'()': 50, '[]': 100, '{}': 1000} + +if &filetype ==# 'pyrex' || &filetype ==# 'cython' let b:control_statement = '\v^\s*(class|def|if|while|with|for|except|cdef|cpdef)>' else let b:control_statement = '\v^\s*(class|def|if|while|with|for|except)>' endif let s:stop_statement = '^\s*\(break\|continue\|raise\|return\|pass\)\>' -" Skip strings and comments. Return 1 for chars to skip. -" jedi* refers to syntax definitions from jedi-vim for call signatures, which -" are inserted temporarily into the buffer. -let s:skip_special_chars = 'synIDattr(synID(line("."), col("."), 0), "name") ' . - \ '=~? "\\vstring|comment|jedi\\S"' - let s:skip_after_opening_paren = 'synIDattr(synID(line("."), col("."), 0), "name") ' . \ '=~? "\\vcomment|jedi\\S"' -" Also ignore anything concealed. -" Wrapper around synconcealed for older Vim (7.3.429, used on Travis CI). -function! s:is_concealed(line, col) - let concealed = synconcealed(a:line, a:col) - return len(concealed) && concealed[0] -endfunction -if has('conceal') - let s:skip_special_chars .= '|| s:is_concealed(line("."), col("."))' -endif - +if !get(g:, 'python_pep8_indent_skip_concealed', 0) || !has('conceal') + " Skip strings and comments. Return 1 for chars to skip. + " jedi* refers to syntax definitions from jedi-vim for call signatures, which + " are inserted temporarily into the buffer. + function! s:_skip_special_chars(line, col) + return synIDattr(synID(a:line, a:col, 0), 'name') + \ =~? "\\vstring|comment|^pythonbytes%(contents)=$|jedi\\S" + endfunction +else + " Also ignore anything concealed. + " TODO: doc; likely only necessary with jedi-vim, where a better version is + " planned (https://github.com/Vimjas/vim-python-pep8-indent/pull/98). + + " Wrapper around synconcealed for older Vim (7.3.429, used on Travis CI). + function! s:is_concealed(line, col) + let concealed = synconcealed(a:line, a:col) + return len(concealed) && concealed[0] + endfunction -let s:skip_search = 'synIDattr(synID(line("."), col("."), 0), "name") ' . - \ '=~? "comment"' + function! s:_skip_special_chars(line, col) + return synIDattr(synID(a:line, a:col, 0), 'name') + \ =~? "\\vstring|comment|^pythonbytes%(contents)=$|jedi\\S" + \ || s:is_concealed(a:line, a:col) + endfunction +endif " Use 'shiftwidth()' instead of '&sw'. " (Since Vim patch 7.3.629, 'shiftwidth' can be set to 0 to follow 'tabstop'). @@ -82,55 +103,41 @@ if exists('*shiftwidth') endfunction else function! s:sw() - return &sw + return &shiftwidth endfunction endif -function! s:pair_sort(x, y) - if a:x[0] == a:y[0] - return a:x[1] == a:y[1] ? 0 : a:x[1] > a:y[1] ? 1 : -1 - else - return a:x[0] > a:y[0] ? 1 : -1 - endif -endfunction - " Find backwards the closest open parenthesis/bracket/brace. -function! s:find_opening_paren(...) - " optional arguments: line and column (defaults to 1) to search around - if a:0 > 0 - let view = winsaveview() - call cursor(a:1, a:0 > 1 ? a:2 : 1) - let ret = s:find_opening_paren() - call winrestview(view) - return ret - endif - - let stopline = max([0, line('.') - s:maxoff]) - +function! s:find_opening_paren(lnum, col) " Return if cursor is in a comment. - exe 'if' s:skip_search '| return [0, 0] | endif' + if synIDattr(synID(a:lnum, a:col, 0), 'name') =~? 'comment' + return [0, 0] + endif - let positions = [] - for p in s:paren_pairs - call add(positions, searchpairpos( - \ '\V'.p[0], '', '\V'.p[1], 'bnW', s:skip_special_chars, stopline)) + call cursor(a:lnum, a:col) + + let nearest = [0, 0] + let timeout = g:python_pep8_indent_searchpair_timeout + let skip_special_chars = 's:_skip_special_chars(line("."), col("."))' + for [p, maxoff] in items(s:paren_pairs) + let stopline = max([0, line('.') - maxoff, nearest[0]]) + let next = searchpairpos( + \ '\V'.p[0], '', '\V'.p[1], 'bnW', skip_special_chars, stopline, timeout) + if next[0] && (next[0] > nearest[0] || (next[0] == nearest[0] && next[1] > nearest[1])) + let nearest = next + endif endfor - - " Remove empty matches and return the type with the closest match - call filter(positions, 'v:val[0]') - call sort(positions, 's:pair_sort') - - return get(positions, -1, [0, 0]) + return nearest endfunction " Find the start of a multi-line statement function! s:find_start_of_multiline_statement(lnum) let lnum = a:lnum while lnum > 0 - if getline(lnum - 1) =~ '\\$' + if getline(lnum - 1) =~# '\\$' let lnum = prevnonblank(lnum - 1) else - let [paren_lnum, _] = s:find_opening_paren(lnum) + let [paren_lnum, _] = s:find_opening_paren(lnum, 1) if paren_lnum < 1 return lnum else @@ -143,27 +150,21 @@ endfunction " Find possible indent(s) of the block starter that matches the current line. function! s:find_start_of_block(lnum, types, multiple) let r = [] - let types = copy(a:types) let re = '\V\^\s\*\('.join(a:types, '\|').'\)\>' let lnum = a:lnum let last_indent = indent(lnum) + 1 while lnum > 0 && last_indent > 0 let indent = indent(lnum) if indent < last_indent - for type in types - let re = '\v^\s*'.type.'>' - if getline(lnum) =~# re - if !a:multiple - return [indent] - endif - if index(r, indent) == -1 - let r += [indent] - endif - " Remove any handled type, e.g. 'if'. - call remove(types, index(types, type)) + if getline(lnum) =~# re + if !a:multiple + return [indent] endif - endfor - let last_indent = indent(lnum) + if index(r, indent) == -1 + let r += [indent] + endif + let last_indent = indent + endif endif let lnum = prevnonblank(lnum - 1) endwhile @@ -182,7 +183,7 @@ function! s:match_expr_on_line(expr, lnum, start, ...) let r = 1 for i in range(a:start, end) call cursor(a:lnum, i) - if !(eval(a:expr) || text[i-1] =~ '\s') + if !(eval(a:expr) || text[i-1] =~# '\s') let r = 0 break endif @@ -193,7 +194,7 @@ endfunction " Line up with open parenthesis/bracket/brace. function! s:indent_like_opening_paren(lnum) - let [paren_lnum, paren_col] = s:find_opening_paren(a:lnum) + let [paren_lnum, paren_col] = s:find_opening_paren(a:lnum, 1) if paren_lnum <= 0 return -2 endif @@ -202,10 +203,13 @@ function! s:indent_like_opening_paren(lnum) let nothing_after_opening_paren = s:match_expr_on_line( \ s:skip_after_opening_paren, paren_lnum, paren_col+1) - let starts_with_closing_paren = getline(a:lnum) =~ '^\s*[])}]' + let starts_with_closing_paren = getline(a:lnum) =~# '^\s*[])}]' + + let hang_closing = get(b:, 'python_pep8_indent_hang_closing', + \ get(g:, 'python_pep8_indent_hang_closing', 0)) if nothing_after_opening_paren - if starts_with_closing_paren + if starts_with_closing_paren && !hang_closing let res = base else let res = base + s:sw() @@ -219,10 +223,13 @@ function! s:indent_like_opening_paren(lnum) " indent further to distinguish the continuation line " from the next logical line. if text =~# b:control_statement && res == base + s:sw() - return base + s:sw() * 2 - else - return res + " But only if not inside parens itself (Flake's E127). + let [paren_lnum, _] = s:find_opening_paren(paren_lnum, 1) + if paren_lnum <= 0 + return res + s:sw() + endif endif + return res endfunction " Match indent of first block of this type. @@ -270,24 +277,23 @@ function! s:indent_like_previous_line(lnum) let base = indent(start) let current = indent(a:lnum) - " Jump to last character in previous line. - call cursor(lnum, len(text)) - let ignore_last_char = eval(s:skip_special_chars) + " Ignore last character in previous line? + let lastcol = len(text) + let col = lastcol " Search for final colon that is not inside something to be ignored. while 1 - let curpos = getpos(".")[2] - if curpos == 1 | break | endif - if eval(s:skip_special_chars) || text[curpos-1] =~ '\s' - normal! h + if col == 1 | break | endif + if text[col-1] =~# '\s' || s:_skip_special_chars(lnum, col) + let col = col - 1 continue - elseif text[curpos-1] == ':' + elseif text[col-1] ==# ':' return base + s:sw() endif break endwhile - if text =~ '\\$' && !ignore_last_char + if text =~# '\\$' && !s:_skip_special_chars(lnum, lastcol) " If this line is the continuation of a control statement " indent further to distinguish the continuation line " from the next logical line. @@ -301,6 +307,13 @@ function! s:indent_like_previous_line(lnum) let empty = getline(a:lnum) =~# '^\s*$' + " Current and prev line are empty, next is not -> indent like next. + if empty && a:lnum > 1 && + \ (getline(a:lnum - 1) =~# '^\s*$') && + \ !(getline(a:lnum + 1) =~# '^\s*$') + return indent(a:lnum + 1) + endif + " If the previous statement was a stop-execution statement or a pass if getline(start) =~# s:stop_statement " Remove one level of indentation if the user hasn't already dedented @@ -311,7 +324,7 @@ function! s:indent_like_previous_line(lnum) return -1 endif - if !empty && s:is_dedented_already(current, base) + if (current || !empty) && s:is_dedented_already(current, base) return -1 endif @@ -329,14 +342,14 @@ endfunction " Is the syntax at lnum (and optionally cnum) a python string? function! s:is_python_string(lnum, ...) let line = getline(a:lnum) - let linelen = len(line) - if linelen < 1 - let linelen = 1 + if a:0 + let cols = type(a:1) != type([]) ? [a:1] : a:1 + else + let cols = range(1, max([1, len(line)])) endif - let cols = a:0 ? type(a:1) != type([]) ? [a:1] : a:1 : range(1, linelen) for cnum in cols if match(map(synstack(a:lnum, cnum), - \ 'synIDattr(v:val,"name")'), 'python\S*String') == -1 + \ "synIDattr(v:val, 'name')"), 'python\S*String') == -1 return 0 end endfor @@ -353,7 +366,7 @@ function! GetPythonPEPIndent(lnum) let prevline = getline(a:lnum-1) " Multilinestrings: continous, docstring or starting. - if s:is_python_string(a:lnum-1, len(prevline)) + if s:is_python_string(a:lnum-1, max([1, len(prevline)])) \ && (s:is_python_string(a:lnum, 1) \ || match(line, '^\%("""\|''''''\)') != -1) @@ -361,18 +374,19 @@ function! GetPythonPEPIndent(lnum) let match_quotes = match(line, '^\s*\zs\%("""\|''''''\)') if match_quotes != -1 " closing multiline string - let quotes = line[match_quotes:match_quotes+2] - let pairpos = searchpairpos(quotes, '', quotes, 'b') + let quotes = line[match_quotes:(match_quotes+2)] + call cursor(a:lnum, 1) + let pairpos = searchpairpos(quotes, '', quotes, 'bW', '', 0, g:python_pep8_indent_searchpair_timeout) if pairpos[0] != 0 return indent(pairpos[0]) else - " TODO: test to cover this! + return -1 endif endif if s:is_python_string(a:lnum-1) - " Previous line is (completely) a string. - return indent(a:lnum-1) + " Previous line is (completely) a string: keep current indent. + return -1 endif if match(prevline, '^\s*\%("""\|''''''\)') != -1