Every one of the projects in this repository is available at the canonical
URL git://git.madduck.net/madduck/pub/<projectpath> — see
each project's metadata for the exact URL.
All patches and comments are welcome. Please squash your changes to logical
commits before using git-format-patch and git-send-email to
patches@git.madduck.net.
If you'd read over the Git project's submission guidelines and adhered to them,
I'd be especially grateful.
James Addison [Sat, 20 Feb 2021 16:44:48 +0000 (16:44 +0000)]
fuzzer: add special-case for multi-line EOF TokenError (#1991)
* Add special-case for multi-line EOF TokenError under Python3.7
* Update conditional check to correspond to original issue description (and include issue hyperlink)
* Add warning and hint regarding replaying the fuzzer code generation
* Include code review suggestion (with modifications for this to follow)
Co-authored-by: Zac Hatfield-Dodds <zac.hatfield.dodds@gmail.com>
* Remove Python version check, since this issue does exist across more recent Python versions than 3.7
* Update explanatory comment
* Add clarification for potentially-ambiguous blib2to3 import
* Update explanatory comment
* Bring comment into consistent format with previous comment
* Revert "Add clarification for potentially-ambiguous blib2to3 import"
rht [Sun, 14 Feb 2021 15:32:29 +0000 (10:32 -0500)]
readme: Include Zulip in used-by section (#1987)
Zulip has recently formatted their code in Black and also set Black as a linter: https://github.com/zulip/zulip/pull/15662.
See also https://chat.zulip.org/#narrow/stream/2-general/topic/black.
Richard Si [Sun, 14 Feb 2021 15:23:47 +0000 (10:23 -0500)]
Fix duplication of checks on internal PRs (#1986)
Internal PRs (that come from branches of psf/black) match both the push
and pull_request events. This leads to a duplication of test, lint, etc.
checks on such PRs. Not only is it a waste of resources, it makes the
Status Checks UI more frustrating to go through.
Patch taken from:
https://github.community/t/duplicate-checks-on-push-and-pull-request-simultaneous-event/18012
James Addison [Thu, 11 Feb 2021 20:11:42 +0000 (20:11 +0000)]
Stability fixup: interaction between newlines and comments (#1975)
* Add test case to illustrate the issue
* Accept carriage returns as valid separators while enumerating comments
Without this acceptance, escaped multi-line statments that use carriage returns will not be counted into the 'ignored_lines' variable since the emitted line values will end with a CR and not an escape character. That leads to comments associated with the line being incorrectly labeled with the STANDALONE_COMMENT type, affecting comment placement and line space management.
Richard Si [Fri, 5 Feb 2021 04:10:45 +0000 (23:10 -0500)]
Update prettier in pre-commit config (#1966)
With older versions of prettier, when the hook failed a bunch of
"[error] No parser could be inferred for file: {PATH}" error lines
showed up because of lack of support of a flag that pre-commit
passes for us by default. It made figuring out why the prettier hook
failed annoying.
Oliver Newman [Wed, 27 Jan 2021 17:36:21 +0000 (12:36 -0500)]
Update example exclude to match only files in root (#1861)
* Update example exclude to match only files in root
The `exclude` section of the example `pyproject.toml` file didn't work
as expected. It claimed to exclude matched files only in the project
root, but it actually excluded matched files at any directory level
within the project. We can address this by prepending `^/` to the regex
to ensure that it only matches files in the project root.
See https://github.com/psf/black/issues/1473#issuecomment-740008873 for
explanation.
Jon Dufresne [Thu, 31 Dec 2020 17:09:07 +0000 (09:09 -0800)]
Add pyi file support to .pre-commit-hooks.yaml (#1875)
Since pre-commit 2.9.0 (2020-11-21), the types_or key can be used to
match multiple disparate file types. For more upstream details, see:
https://github.com/pre-commit/pre-commit/issues/607
Add the minimum_pre_commit_version to require pre-commit 2.9.0+.
Richard Si [Mon, 28 Dec 2020 02:38:11 +0000 (21:38 -0500)]
Bump mypy to 0.780 in pre-commit config (#1887)
To avoid hitting a mypy bug causes pre-commit to always fail on CPython
3.9. Even though it's still an outdated version, the bug effectively
blocks development on CPython 3.9 so that's why this commit exists
instead of waiting for cooperlees to finish his bump to 0.790 PR.
Also this fixes primer to ensure it always raises CalledProcessError
with an int error code. I stole the patch from cooperlees's mypy bump
PR.
It's funny how mypy 0.790 is already asked for in our
Pipfile.lock file, but oh well mypy is probably more commonly run
through pre-commit than standalone I guess.
Oh and if you're curious why the bug doesn't up on CPython 3.8 or lower:
there was some subscription AST changes in CPython 3.9.
Justin Prieto [Mon, 9 Nov 2020 19:58:23 +0000 (14:58 -0500)]
Correctly handle inline tabs in docstrings (#1810)
The `fix_docstring` function expanded all tabs, which caused a
difference in the AST representation when those tabs were inline and not
leading. This changes the function to only expand leading tabs so inline
tabs are preserved.
Richard Si [Sun, 1 Nov 2020 21:17:23 +0000 (16:17 -0500)]
Automatically build and upload binaries on release (#1743)
This commit adds a new GitHub Actions workflow that builds self-contained
binaries / executables and uploads them as release assets to the triggering
release. Publishing a release, drafting one doesn't count, will trigger this
workflow.
I personally used GitHub Actions only because it's the CI/CD platform(?)
I am familiar with. Only Windows and Linux binaries are supported since
I don't have any systems running Mac OS.
For Linux, I had originally planned to use the manylinux2010 docker image
the PyPA provides for highly compatible wheel building, but unfortunately
it wasn't feasible due to GitHub Actions and PyInstaller incompatibilities.
As a stopgap the oldest versions of Linux and Windows are used although
Windows Server 2019 isn't that old nor is Ubuntu 16.04! I guess someone
(maybe me) could work out something else if compatibility is big problem.
A few things you should know about the workflow:
- You don't need to set the `GITHUB_TOKEN` secret as it is automatically
provided by GitHub.
- matrix.pathsep is used because PyInstaller configuration's format is OS
dependent for some reason ...
Also it's worth mentioning that Black once had Travis CI and AppVeyor
configuration that did the same thing as this commit. They were committed
in mid 2018 and worked (somewhat) well. Eventually we stopped using AppVeyor
and the refactor to packages broke the Travis CI config. This commit
replaces the still existing and broken Travis CI config wholesale.
Co-authored-by: Anders Fredrik Kiær <31612826+anders-kiaer@users.noreply.github.com>
- Anders told me that I could get the release asset upload URL directly
from the github.event.release payload. I originally planned to use
bruceadams/get-release to get such URL.
Cooper Lees [Tue, 13 Oct 2020 05:03:00 +0000 (22:03 -0700)]
Add blackd to nicely exit if missing aiohttp deps (#1761)
- If no aiohttp* deps exist nicely print a helpful message and exit
- There seems to be no nice way to optionally install the entry point, so lets make the entry point nicer
Test:
```
cooper-mbp1:black cooper$ /tmp/tb/bin/pip install .
cooper-mbp1:black cooper$ /tmp/tb/bin/blackd
aiohttp dependency is not installed: No module named 'aiohttp'. Please re-install black with the '[d]' extra install to obtain aiohttp_cors: `pip install black[d]`
cooper-mbp1:black cooper$ /tmp/tb/bin/pip install .[d]
...
Successfully installed aiohttp-3.6.3 aiohttp-cors-0.7.0 black
cooper-mbp1:black cooper$ /tmp/tb/bin/blackd
blackd version 20.8b2.dev31+gdd2f86a.d20201013 listening on localhost port 45484
```
Pete Grayson [Sun, 27 Sep 2020 21:41:11 +0000 (21:41 +0000)]
Repair colorama wrapping on non-Windows platforms (#1670)
* Repair colorama wrapping on non-Windows platforms
The wrap_stream_for_windows() function calls
colorama.initialise.wrap_stream() function to apply colorama's magic to
wrapper to the output stream. Except this wrapper is only applied on
Windows platforms that need it, otherwise the original stream is
returned as-is.
The colorama wrapped stream lacks a detach() method, so a no-op lambda
was being assigned to the wrapped stream.
The problem is that the no-op lambda was being assigned unconditionally
whether or not colorama actually returns a wrapped stream, thus
replacing the original TextIOWrapper's detach() method. Replacing the
detach() method with a no-op lambda is the root cause of the problem
observed in #1664.
The solution is to only assign the no-op detach() method if the stream
lacks its own detach() method.
Richard Si [Thu, 10 Sep 2020 20:21:37 +0000 (16:21 -0400)]
Fix empty line handling when formatting typing stubs (#1646)
Black used to erroneously remove all empty lines between non-function
code and decorators when formatting typing stubs. Now a single empty
line is enforced.
I chose for putting empty lines around decorated classes that have empty
bodies since removing empty lines around such classes would cause a
formatting issue that seems to be impossible to fix.
For example:
```
class A: ...
@some_decorator
class B: ...
class C: ...
class D: ...
@some_other_decorator
def foo(): -> None: ...
```
It is easy to enforce no empty lines between class A, B, and C.
Just return 0, 0 for a line that is a decorator and precedes an stub
class. Fortunately before this commit, empty lines after that class
would be removed already.
Now let's look at the empty line between class D and function foo. In
this case, there should be an empty line there since it's class code next
to function code. The problem is that when deciding to add X empty lines
before a decorator, you can't tell whether it's before a class or a
function. If the decorator is before a function, then an empty line
is needed, while no empty lines are needed when the decorator is
before a class.
So even though I personally prefer no empty lines around decorated
classes, I had to go the other way surrounding decorated classes with
empty lines.
- attrs already adopted Black but they updated to 20.08b1 + did a format pass and removed some trailing commas
https://github.com/python-attrs/attrs/commit/f680c5b83e65413eeb684c68ece60198015058c3
Richard Si [Mon, 31 Aug 2020 21:20:05 +0000 (17:20 -0400)]
Fix incorrect space before colon in if/while stmts (#1655)
* Fix incorrect space before colon in if/while stmts
Previously Black would format this code
```
if (foo := True):
print(foo)
```
as
```
if (foo := True) :
print(foo)
```
adding an incorrect space after the RPAR. Buggy code in the
normalize_invisible_parens function caused the colon to be wrapped in
invisible parentheses. The LPAR of that pair was then prefixed with a
single space at the request of the whitespace function.
This commit fixes the accidental skipping of a pre-condition check
which must return True before parenthesis normalization of a specific
child Leaf or Node can happen. The pre-condition check being skipped
was why the colon was wrapped in invisible parentheses.
Richard Si [Wed, 26 Aug 2020 22:17:59 +0000 (18:17 -0400)]
Fix multiline docstring quote normalization
The quotes of multiline docstrings are now only normalized when string
normalization is off, instead of the string normalization setting being
ignored and the quotes being *always* normalized.
I had to make a new test case and data file since the current pair for
docstrings only worked when there is no formatting difference between the
formatting results with string normalization on and off. I needed to add
tests for when there *are* differences between the two. So I split
test_docstring's test code when string normalization is disabled into a
new test case along with a new data file.
Łukasz Langa [Wed, 26 Aug 2020 10:22:56 +0000 (12:22 +0200)]
Treat all trailing commas as pre-existing, as they effectively are
On a second pass of Black on the same file, inserted trailing commas are now
pre-existing. Doesn't make sense to differentiate between the passes then.
Cooper Lees [Wed, 26 Aug 2020 04:55:05 +0000 (21:55 -0700)]
Primer update config - enable pytest (#1626)
Reformatted projects I have acceess to:
- aioexabgp
- bandersnatch
- flake8-bugbear
```
-- primer results 📊 --
13 / 16 succeeded (81.25%) ✅
0 / 16 FAILED (0.0%) 💩
- 3 projects disabled by config
- 0 projects skipped due to Python version
- 0 skipped due to long checkout
```
* Also re-enable pytest
```
-- primer results 📊 --
14 / 16 succeeded (87.5%) ✅
0 / 16 FAILED (0.0%) 💩
- 2 projects disabled by config
- 0 projects skipped due to Python version
- 0 skipped due to long checkout
Łukasz Langa [Mon, 24 Aug 2020 16:29:59 +0000 (18:29 +0200)]
Address pre-existing trailing commas when not in the rightmost bracket pair
This required some hackery. Long story short, we need to reuse the ability to
omit rightmost bracket pairs (which glues them together and splits on something
else instead), for use with pre-existing trailing commas.
This form of user-controlled formatting is brittle so we have to be careful not
to cause a scenario where Black first formats code without trailing commas in
one way, and then looks at the same file with pre-existing trailing commas
(that it itself put on the previous run) and decides to format the code again.
One particular ugly edge case here is handling of optional parentheses. In
particular, the long-standing `line_length=1` hack got in the way of
pre-existing trailing commas and had to be removed. Instead, a more
intelligent but costly solution was put in place: a "second opinion" if the
formatting that omits optional parentheses ended up causing lines to be too
long. Again, for efficiency purposes, Black reuses Leaf objects from blib2to3
and modifies them in place, which was invalid for having two separate
formattings. Line cloning was used to mitigate this.
projects / etc / vim.git / log