[etc/mutt.git] / .mutt / muttrc

# from /usr/share/doc/mutt/examples/Muttrc.gz

set my_confdir="~/.mutt"

# set abort_nosubject=ask-yes
#
# Name: abort_nosubject
# Type: quadoption
# Default: ask-yes
# 
# 
# If set to yes, when composing messages and no subject is given
# at the subject prompt, composition will be aborted.  If set to
# no, composing messages with no subject given at the subject
# prompt will never be aborted.
# 
# 
# set abort_unmodified=yes
#
# Name: abort_unmodified
# Type: quadoption
# Default: yes
# 
# 
# If set to yes, composition will automatically abort after
# editing the message body if no changes are made to the file (this
# check only happens after the first edit of the file).  When set
# to no, composition will never be aborted.
# 
# 
# set alias_file="~/.muttrc"
#
# Name: alias_file
# Type: path
# Default: "~/.muttrc"
# 
# 
# The default file in which to save aliases created by the 
# ``create-alias'' function.
# 
# Note: Mutt will not automatically source this file; you must
# explicitly use the ``source'' command for it to be executed.
# 
# The default for this option is the currently used muttrc file, or
# ``~/.muttrc'' if no user muttrc was found.
# 
# 
# set alias_format="%4n %2f %t %-10a   %r"
#
# Name: alias_format
# Type: string
# Default: "%4n %2f %t %-10a   %r"
# 
# 
# Specifies the format of the data displayed for the `alias' menu.  The
# following printf(3)-style sequences are available:
# 
# %a      alias name
# %f      flags - currently, a "d" for an alias marked for deletion
# %n      index number
# %r      address which alias expands to
# %t      character which indicates if the alias is tagged for inclusion
# 
# 
# set allow_8bit=yes
#
# Name: allow_8bit
# Type: boolean
# Default: yes
# 
# 
# Controls whether 8-bit data is converted to 7-bit using either Quoted-
# Printable or Base64 encoding when sending mail.
# 
# 
# set allow_ansi=no
#
# Name: allow_ansi
# Type: boolean
# Default: no
# 
# 
# Controls whether ANSI color codes in messages (and color tags in 
# rich text messages) are to be interpreted.
# Messages containing these codes are rare, but if this option is set,
# their text will be colored accordingly. Note that this may override
# your color choices, and even present a security problem, since a
# message could include a line like "[-- PGP output follows ..." and
# give it the same color as your attachment color.
# 
# 
# set arrow_cursor=no
#
# Name: arrow_cursor
# Type: boolean
# Default: no
# 
# 
# When set, an arrow (``->'') will be used to indicate the current entry
# in menus instead of highlighting the whole line.  On slow network or modem
# links this will make response faster because there is less that has to
# be redrawn on the screen when moving to the next or previous entries
# in the menu.
# 
# 
# set ascii_chars=no
#
# Name: ascii_chars
# Type: boolean
# Default: no
# 
# 
# If set, Mutt will use plain ASCII characters when displaying thread
# and attachment trees, instead of the default ACS characters.
# 
# 
# set askbcc=no
#
# Name: askbcc
# Type: boolean
# Default: no
# 
# 
# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
# before editing an outgoing message.
# 
# 
# set askcc=no
#
# Name: askcc
# Type: boolean
# Default: no
# 
# 
# If set, Mutt will prompt you for carbon-copy (Cc) recipients before
# editing the body of an outgoing message.
# 
# 
# set assumed_charset=""
#
# Name: assumed_charset
# Type: string
# Default: ""
# 
# 
# This variable is a colon-separated list of character encoding
# schemes for messages without character encoding indication.
# Header field values and message body content without character encoding
# indication would be assumed that they are written in one of this list.
# By default, all the header fields and message body without any charset
# indication are assumed to be in "us-ascii".
# 
# For example, Japanese users might prefer this:
# 
# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
# 
# However, only the first content is valid for the message body.
# 
# 
# set attach_charset=""
#
# Name: attach_charset
# Type: string
# Default: ""
# 
# 
# This variable is a colon-separated list of character encoding
# schemes for text file attachments.
# If unset, $charset value will be used instead.
# For example, the following configuration would work for Japanese
# text handling:
# 
# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
# 
# Note: "iso-2022-*" must be put at the head of the value as shown above
# if included.
# 
# 
# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
#
# Name: attach_format
# Type: string
# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
# 
# 
# This variable describes the format of the `attachment' menu.  The
# following printf-style sequences are understood:
# 
# %C      charset
# %c      requires charset conversion (n or c)
# %D      deleted flag
# %d      description
# %e      MIME content-transfer-encoding
# %f      filename
# %I      disposition (I=inline, A=attachment)
# %m      major MIME type
# %M      MIME subtype
# %n      attachment number
# %Q      "Q", if MIME part qualifies for attachment counting
# %s      size
# %t      tagged flag
# %T      graphic tree characters
# %u      unlink (=to delete) flag
# %X      number of qualifying MIME parts in this part and its children
#         (please see the ``attachments'' section for possible speed effects)
# %>X     right justify the rest of the string and pad with character "X"
# %|X     pad to the end of the line with character "X"
# %*X     soft-fill with character "X" as pad
# 
# 
# For an explanation of `soft-fill', see the ``$index_format'' documentation.
# 
# 
# set attach_sep="\n"
#
# Name: attach_sep
# Type: string
# Default: "\n"
# 
# 
# The separator to add between attachments when operating (saving,
# printing, piping, etc) on a list of tagged attachments.
# 
# 
# set attach_split=yes
#
# Name: attach_split
# Type: boolean
# Default: yes
# 
# 
# If this variable is unset, when operating (saving, printing, piping,
# etc) on a list of tagged attachments, Mutt will concatenate the
# attachments and will operate on them as a single attachment. The
# ``$attach_sep'' separator is added after each attachment. When set,
# Mutt will operate on the attachments one by one.
# 
# 
# set attribution="On %d, %n wrote:"
#
# Name: attribution
# Type: string
# Default: "On %d, %n wrote:"
# 
# 
# This is the string that will precede a message which has been included
# in a reply.  For a full listing of defined printf()-like sequences see
# the section on ``$index_format''.
# 
set attribution="also sprach %n <%a> [%[%Y.%m.%d.%H%M %z]]:"
# 
# set autoedit=no
#
# Name: autoedit
# Type: boolean
# Default: no
# 
# 
# When set along with ``$edit_headers'', Mutt will skip the initial
# send-menu and allow you to immediately begin editing the body of your
# message.  The send-menu may still be accessed once you have finished
# editing the body of your message.
# 
# Also see ``$fast_reply''.
# 
set autoedit
# 
# set auto_tag=no
#
# Name: auto_tag
# Type: boolean
# Default: no
# 
# 
# When set, functions in the index menu which affect a message
# will be applied to all tagged messages (if there are any).  When
# unset, you must first use the tag-prefix function (default: ";") to
# make the next function apply to all tagged messages.
# 
# 
# set beep=yes
#
# Name: beep
# Type: boolean
# Default: yes
# 
# 
# When this variable is set, mutt will beep when an error occurs.
# 
set beep=no
# 
# set beep_new=no
#
# Name: beep_new
# Type: boolean
# Default: no
# 
# 
# When this variable is set, mutt will beep whenever it prints a message
# notifying you of new mail.  This is independent of the setting of the
# ``$beep'' variable.
# 
# 
# set bounce=ask-yes
#
# Name: bounce
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether you will be asked to confirm bouncing messages.
# If set to yes you don't get asked if you want to bounce a
# message. Setting this variable to no is not generally useful,
# and thus not recommended, because you are unable to bounce messages.
# 
# 
# set bounce_delivered=yes
#
# Name: bounce_delivered
# Type: boolean
# Default: yes
# 
# 
# When this variable is set, mutt will include Delivered-To headers when
# bouncing messages.  Postfix users may wish to unset this variable.
# 
# Note: On Debian systems, this option is unset by default in
# /etc/Muttrc.
# 
# 
# set braille_friendly=no
#
# Name: braille_friendly
# Type: boolean
# Default: no
# 
# 
# When this variable is set, mutt will place the cursor at the beginning
# of the current line in menus, even when the arrow_cursor variable
# is unset, making it easier for blind persons using Braille displays to 
# follow these menus.  The option is disabled by default because many 
# visual terminals don't permit making the cursor invisible.
# 
# 
# set check_mbox_size=no
#
# Name: check_mbox_size
# Type: boolean
# Default: no
# 
# 
# When this variable is set, mutt will use file size attribute instead of
# access time when checking for new mail.
# 
# 
# set charset=""
#
# Name: charset
# Type: string
# Default: ""
# 
# 
# Character set your terminal uses to display and enter textual data.
# It is also the fallback for $send_charset.
# 
# 
# set check_new=yes
#
# Name: check_new
# Type: boolean
# Default: yes
# 
# 
# Note: this option only affects maildir and MH style
# mailboxes.
# 
# When set, Mutt will check for new mail delivered while the
# mailbox is open.  Especially with MH mailboxes, this operation can
# take quite some time since it involves scanning the directory and
# checking each file to see if it has already been looked at.  If
# check_new is unset, no check for new mail is performed
# while the mailbox is open.
# 
# 
# set collapse_unread=yes
#
# Name: collapse_unread
# Type: boolean
# Default: yes
# 
# 
# When unset, Mutt will not collapse a thread if it contains any
# unread messages.
# 
# 
# set uncollapse_jump=no
#
# Name: uncollapse_jump
# Type: boolean
# Default: no
# 
# 
# When set, Mutt will jump to the next unread message, if any,
# when the current thread is uncollapsed.
# 
# 
# set compose_format="-- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-"
#
# Name: compose_format
# Type: string
# Default: "-- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-"
# 
# 
# Controls the format of the status line displayed in the Compose
# menu.  This string is similar to ``$status_format'', but has its own
# set of printf()-like sequences:
# 
# %a      total number of attachments 
# %h      local hostname
# %l      approximate size (in bytes) of the current message
# %v      Mutt version string
# 
# 
# See the text describing the ``$status_format'' option for more 
# information on how to set ``$compose_format''.
# 
# 
# set config_charset=""
#
# Name: config_charset
# Type: string
# Default: ""
# 
# 
# When defined, Mutt will recode commands in rc files from this
# encoding.
# 
# 
# set confirmappend=yes
#
# Name: confirmappend
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will prompt for confirmation when appending messages to
# an existing mailbox.
# 
set confirmappend=no
# 
# set confirmcreate=yes
#
# Name: confirmcreate
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will prompt for confirmation when saving messages to a
# mailbox which does not yet exist before creating it.
# 
# 
# set connect_timeout=30
#
# Name: connect_timeout
# Type: number
# Default: 30
# 
# 
# Causes Mutt to timeout a network connection (for IMAP or POP) after this
# many seconds if the connection is not able to be established.  A negative
# value causes Mutt to wait indefinitely for the connection to succeed.
# 
# 
# set content_type="text/plain"
#
# Name: content_type
# Type: string
# Default: "text/plain"
# 
# 
# Sets the default Content-Type for the body of newly composed messages.
# 
# 
# set copy=yes
#
# Name: copy
# Type: quadoption
# Default: yes
# 
# 
# This variable controls whether or not copies of your outgoing messages
# will be saved for later references.  Also see ``$record'',
# ``$save_name'', ``$force_name'' and ``fcc-hook''.
# 
set copy=yes
# 
# set crypt_use_gpgme=no
#
# Name: crypt_use_gpgme
# Type: boolean
# Default: no
# 
# 
# This variable controls the use of the GPGME-enabled crypto backends.
# If it is set and Mutt was built with gpgme support, the gpgme code for
# S/MIME and PGP will be used instead of the classic code.  Note that
# you need to set this option in .muttrc; it won't have any effect when 
# used interactively.
# 
# 
# set crypt_use_pka=no
#
# Name: crypt_use_pka
# Type: boolean
# Default: no
# 
# 
# (http://www.g10code.de/docs/pka-intro.de.pdf) during signature
# verification (only supported by the GPGME backend).
# 
# 
# set crypt_autopgp=yes
#
# Name: crypt_autopgp
# Type: boolean
# Default: yes
# 
# 
# This variable controls whether or not mutt may automatically enable
# PGP encryption/signing for messages.  See also ``$crypt_autoencrypt'',
# ``$crypt_replyencrypt'',
# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
# 
# 
# set crypt_autosmime=yes
#
# Name: crypt_autosmime
# Type: boolean
# Default: yes
# 
# 
# This variable controls whether or not mutt may automatically enable
# S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'',
# ``$crypt_replyencrypt'',
# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
# 
# 
# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
#
# Name: date_format
# Type: string
# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
# 
# 
# This variable controls the format of the date printed by the ``%d''
# sequence in ``$index_format''.  This is passed to the strftime
# call to process the date. See the man page for strftime(3) for
# the proper syntax.
# 
# Unless the first character in the string is a bang (``!''), the month
# and week day names are expanded according to the locale specified in
# the variable ``$locale''. If the first character in the string is a
# bang, the bang is discarded, and the month and week day names in the
# rest of the string are expanded in the C locale (that is in US
# English).
# 
set date_format="%d %b %Y %T%Z"
# 
# set default_hook="~f %s !~P | (~P ~C %s)"
#
# Name: default_hook
# Type: string
# Default: "~f %s !~P | (~P ~C %s)"
# 
# 
# This variable controls how message-hooks, reply-hooks, send-hooks,
# send2-hooks, save-hooks, and fcc-hooks will
# be interpreted if they are specified with only a simple regexp,
# instead of a matching pattern.  The hooks are expanded when they are
# declared, so a hook will be interpreted according to the value of this
# variable at the time the hook is declared.  The default value matches
# if the message is either from a user matching the regular expression
# given, or if it is from you (if the from address matches
# ``alternates'') and is to or cc'ed to a user matching the given
# regular expression.
# 
# 
# set delete=ask-yes
#
# Name: delete
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether or not messages are really deleted when closing or
# synchronizing a mailbox.  If set to yes, messages marked for
# deleting will automatically be purged without prompting.  If set to
# no, messages marked for deletion will be kept in the mailbox.
# 
set delete=yes
# 
# set delete_untag=yes
#
# Name: delete_untag
# Type: boolean
# Default: yes
# 
# 
# If this option is set, mutt will untag messages when marking them
# for deletion.  This applies when you either explicitly delete a message,
# or when you save it to another folder.
# 
# 
# set digest_collapse=yes
#
# Name: digest_collapse
# Type: boolean
# Default: yes
# 
# 
# If this option is set, mutt's received-attachments menu will not show the subparts of
# individual messages in a multipart/digest.  To see these subparts, press 'v' on that menu.
# 
# 
# set display_filter=""
#
# Name: display_filter
# Type: path
# Default: ""
# 
# 
# When set, specifies a command used to filter messages.  When a message
# is viewed it is passed as standard input to $display_filter, and the
# filtered message is read from the standard output.
# 
# 
# set dotlock_program="/usr/bin/mutt_dotlock"
#
# Name: dotlock_program
# Type: path
# Default: "/usr/bin/mutt_dotlock"
# 
# 
# Contains the path of the mutt_dotlock (8) binary to be used by
# mutt.
# 
# 
# set dsn_notify=""
#
# Name: dsn_notify
# Type: string
# Default: ""
# 
# 
# This variable sets the request for when notification is returned.  The
# string consists of a comma separated list (no spaces!) of one or more
# of the following: never, to never request notification,
# failure, to request notification on transmission failure,
# delay, to be notified of message delays, success, to be
# notified of successful transmission.
# 
# Example: set dsn_notify="failure,delay"
# 
# Note: when using $sendmail for delivery, you should not enable
# this unless you are either using Sendmail 8.8.x or greater or a MTA
# providing a sendmail(1)-compatible interface supporting the -N option
# for DSN. For SMTP delivery, it depends on the server whether DSN is
# supported or not.
# 
# 
# set dsn_return=""
#
# Name: dsn_return
# Type: string
# Default: ""
# 
# 
# This variable controls how much of your message is returned in DSN
# messages.  It may be set to either hdrs to return just the
# message header, or full to return the full message.
# 
# Example: set dsn_return=hdrs
# 
# Note: when using $sendmail for delivery, you should not enable
# this unless you are either using Sendmail 8.8.x or greater or a MTA
# providing a sendmail(1)-compatible interface supporting the -R option
# for DSN. For SMTP delivery, it depends on the server whether DSN is
# supported or not.
# 
# 
# set duplicate_threads=yes
#
# Name: duplicate_threads
# Type: boolean
# Default: yes
# 
# 
# This variable controls whether mutt, when sorting by threads, threads
# messages with the same message-id together.  If it is set, it will indicate
# that it thinks they are duplicates of each other with an equals sign
# in the thread diagram.
# 
# 
# set edit_headers=no
#
# Name: edit_headers
# Type: boolean
# Default: no
# 
# 
# This option allows you to edit the header of your outgoing messages
# along with the body of your message.
# 
# Note that changes made to the References: and Date: headers are
# ignored for interoperability reasons.
# 
set edit_headers=yes
# 
# set editor=""
#
# Name: editor
# Type: path
# Default: ""
# 
# 
# This variable specifies which editor is used by mutt.
# It defaults to the value of the VISUAL, or EDITOR, environment
# variable, or to the string "/usr/bin/editor" if neither of those are set.
# 
set editor="mailplate --edit --auto --keep-unknown"
# 
# set encode_from=no
#
# Name: encode_from
# Type: boolean
# Default: no
# 
# 
# When set, mutt will quoted-printable encode messages when
# they contain the string "From " in the beginning of a line.
# Useful to avoid the tampering certain mail delivery and transport
# agents tend to do with messages.
# 
# 
# set envelope_from_address=""
#
# Name: envelope_from_address
# Type: e-mail address
# Default: ""
# 
# 
# Manually sets the envelope sender for outgoing messages.
# This value is ignored if ``$use_envelope_from'' is unset.
# 
# 
# set escape="~"
#
# Name: escape
# Type: string
# Default: "~"
# 
# 
# Escape character to use for functions in the builtin editor.
# 
# 
# set fast_reply=no
#
# Name: fast_reply
# Type: boolean
# Default: no
# 
# 
# When set, the initial prompt for recipients and subject are skipped
# when replying to messages, and the initial prompt for subject is
# skipped when forwarding messages.
# 
# Note: this variable has no effect when the ``$autoedit''
# variable is set.
# 
set fast_reply=yes
# 
# set fcc_attach=yes
#
# Name: fcc_attach
# Type: boolean
# Default: yes
# 
# 
# This variable controls whether or not attachments on outgoing messages
# are saved along with the main body of your message.
# 
set fcc_attach=yes
# 
# set fcc_clear=no
#
# Name: fcc_clear
# Type: boolean
# Default: no
# 
# 
# When this variable is set, FCCs will be stored unencrypted and
# unsigned, even when the actual message is encrypted and/or
# signed.
# (PGP only)
# 
# 
# set folder="~/Mail"
#
# Name: folder
# Type: path
# Default: "~/Mail"
# 
# 
# Specifies the default location of your mailboxes.  A `+' or `=' at the
# beginning of a pathname will be expanded to the value of this
# variable.  Note that if you change this variable from the default
# value you need to make sure that the assignment occurs before
# you use `+' or `=' for any other variables since expansion takes place
# during the `set' command.
# 
set folder="~/mail"
# 
# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
#
# Name: folder_format
# Type: string
# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
# 
# 
# This variable allows you to customize the file browser display to your
# personal taste.  This string is similar to ``$index_format'', but has
# its own set of printf()-like sequences:
# 
# %C      current file number
# %d      date/time folder was last modified
# %f      filename
# %F      file permissions
# %g      group name (or numeric gid, if missing)
# %l      number of hard links
# %N      N if folder has new mail, blank otherwise
# %s      size in bytes
# %t      * if the file is tagged, blank otherwise
# %u      owner name (or numeric uid, if missing)
# %>X     right justify the rest of the string and pad with character "X"
# %|X     pad to the end of the line with character "X"
# %*X     soft-fill with character "X" as pad
# 
# 
# For an explanation of `soft-fill', see the ``$index_format'' documentation.
# 
# 
# set followup_to=yes
#
# Name: followup_to
# Type: boolean
# Default: yes
# 
# ## ENABLED BY A DEFAULT HOOK
# 
# Controls whether or not the Mail-Followup-To header field is
# generated when sending mail.  When set, Mutt will generate this
# field when you are replying to a known mailing list, specified with
# the ``subscribe'' or ``lists'' commands.
# 
# This field has two purposes.  First, preventing you from
# receiving duplicate copies of replies to messages which you send
# to mailing lists, and second, ensuring that you do get a reply
# separately for any messages sent to known lists to which you are
# not subscribed.  The header will contain only the list's address
# for subscribed lists, and both the list address and your own
# email address for unsubscribed lists.  Without this header, a
# group reply to your message sent to a subscribed list will be
# sent to both the list and your address, resulting in two copies
# of the same email for you.
# 
# 
# set force_name=no
#
# Name: force_name
# Type: boolean
# Default: no
# 
# 
# This variable is similar to ``$save_name'', except that Mutt will
# store a copy of your outgoing message by the username of the address
# you are sending to even if that mailbox does not exist.
# 
# Also see the ``$record'' variable.
# 
# 
# set forward_decode=yes
#
# Name: forward_decode
# Type: boolean
# Default: yes
# 
# 
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message.  The message header is also RFC2047 decoded.
# This variable is only used, if ``$mime_forward'' is unset,
# otherwise ``$mime_forward_decode'' is used instead.
# 
# 
# set forward_edit=yes
#
# Name: forward_edit
# Type: quadoption
# Default: yes
# 
# 
# This quadoption controls whether or not the user is automatically
# placed in the editor when forwarding messages.  For those who always want
# to forward with no modification, use a setting of ``no''.
# 
# 
# set forward_format="[%a: %s]"
#
# Name: forward_format
# Type: string
# Default: "[%a: %s]"
# 
# 
# This variable controls the default subject when forwarding a message.
# It uses the same format sequences as the ``$index_format'' variable.
# 
# 
# set forward_quote=no
#
# Name: forward_quote
# Type: boolean
# Default: no
# 
# 
# When set forwarded messages included in the main body of the
# message (when ``$mime_forward'' is unset) will be quoted using
# ``$indent_string''.
# 
# 
# set from=""
#
# Name: from
# Type: e-mail address
# Default: ""
# 
# 
# When set, this variable contains a default from address.  It
# can be overridden using my_hdr (including from send-hooks) and
# ``$reverse_name''.  This variable is ignored if ``$use_from''
# is unset.
# 
# Defaults to the contents of the environment variable EMAIL.
# 
set from='martin f krafft <madduck@madduck.net>'
# 
# set gecos_mask="^[^,]*"
#
# Name: gecos_mask
# Type: regular expression
# Default: "^[^,]*"
# 
# 
# A regular expression used by mutt to parse the GECOS field of a password
# entry when expanding the alias.  By default the regular expression is set
# to "^[^,]*" which will return the string up to the first "," encountered.
# If the GECOS field contains a string like "lastname, firstname" then you
# should set the gecos_mask=".*".
# 
# This can be useful if you see the following behavior: you address a e-mail
# to user ID stevef whose full name is Steve Franklin.  If mutt expands 
# stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to
# a regular expression that will match the whole name so mutt will expand
# "Franklin" to "Franklin, Steve".
# 
# 
# set hdrs=yes
#
# Name: hdrs
# Type: boolean
# Default: yes
# 
# 
# When unset, the header fields normally added by the ``my_hdr''
# command are not created.  This variable must be unset before
# composing a new message or replying in order to take effect.  If set,
# the user defined header fields are added to every new message.
# 
# 
# set header=no
#
# Name: header
# Type: boolean
# Default: no
# 
# 
# When set, this variable causes Mutt to include the header
# of the message you are replying to into the edit buffer.
# The ``$weed'' setting applies.
# 
# 
# set help=yes
#
# Name: help
# Type: boolean
# Default: yes
# 
# 
# When set, help lines describing the bindings for the major functions
# provided by each menu are displayed on the first line of the screen.
# 
# Note: The binding will not be displayed correctly if the
# function is bound to a sequence rather than a single keystroke.  Also,
# the help line may not be updated if a binding is changed while Mutt is
# running.  Since this variable is primarily aimed at new users, neither
# of these should present a major problem.
# 
# 
# set hidden_host=no
#
# Name: hidden_host
# Type: boolean
# Default: no
# 
# 
# When set, mutt will skip the host name part of ``$hostname'' variable
# when adding the domain part to addresses.  This variable does not
# affect the generation of Message-IDs, and it will not lead to the 
# cut-off of first-level domains.
# 
# 
# set hide_limited=no
#
# Name: hide_limited
# Type: boolean
# Default: no
# 
# 
# When set, mutt will not show the presence of messages that are hidden
# by limiting, in the thread tree.
# 
# 
# set hide_missing=yes
#
# Name: hide_missing
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will not show the presence of missing messages in the
# thread tree.
# 
# 
# set hide_thread_subject=yes
#
# Name: hide_thread_subject
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will not show the subject of messages in the thread
# tree that have the same subject as their parent or closest previously
# displayed sibling.
# 
# 
# set hide_top_limited=no
#
# Name: hide_top_limited
# Type: boolean
# Default: no
# 
# 
# When set, mutt will not show the presence of messages that are hidden
# by limiting, at the top of threads in the thread tree.  Note that when
# $hide_limited is set, this option will have no effect.
# 
# 
# set hide_top_missing=yes
#
# Name: hide_top_missing
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will not show the presence of missing messages at the
# top of threads in the thread tree.  Note that when $hide_missing is
# set, this option will have no effect.
# 
# 
# set history=10
#
# Name: history
# Type: number
# Default: 10
# 
# 
# This variable controls the size (in number of strings remembered) of
# the string history buffer. The buffer is cleared each time the
# variable is set.
# 
# 
# set history_file="~/.mutthistory"
#
# Name: history_file
# Type: path
# Default: "~/.mutthistory"
# 
# 
# The file in which Mutt will save its history.
# 
set history_file="~/.var/mutt/history"
# 
# set honor_followup_to=yes
#
# Name: honor_followup_to
# Type: quadoption
# Default: yes
# 
# 
# This variable controls whether or not a Mail-Followup-To header is
# honored when group-replying to a message.
# 
# 
# set hostname=""
#
# Name: hostname
# Type: string
# Default: ""
# 
# 
# Specifies the fully-qualified hostname of the system mutt is running on
# containing the host's name and the DNS domain it belongs to. It is used
# as the domain part (after ``@'') for local email addresses as well as
# Message-Id headers.
# 
# Its value is determined at startup as follows: If the node's name
# as returned by the uname(3) function contains the hostname and the
# domain, these are used to construct $hostname. If there is no
# domain part returned, Mutt will look for a ``domain'' or ``search''
# line in /etc/resolv.conf to determine the domain. Optionally, Mutt
# can be compiled with a fixed domain name in which case a detected
# one is not used.
# 
# Also see ``$use_domain'' and ``$hidden_host''.
# 
# Note: On Debian systems, the default for this variable is obtained
# from /etc/mailname when Mutt starts.
# 
# 
# set ignore_linear_white_space=no
#
# Name: ignore_linear_white_space
# Type: boolean
# Default: no
# 
# 
# This option replaces linear-white-space between encoded-word
# and *text to a single space to prevent the display of MIME-encoded
# ``Subject'' field from being divided into multiple lines.
# 
# 
# set ignore_list_reply_to=no
#
# Name: ignore_list_reply_to
# Type: boolean
# Default: no
# 
# 
# Affects the behaviour of the reply function when replying to
# messages from mailing lists (as defined by the ``subscribe'' or
# ``lists'' commands).  When set, if the ``Reply-To:'' field is
# set to the same value as the ``To:'' field, Mutt assumes that the
# ``Reply-To:'' field was set by the mailing list to automate responses
# to the list, and will ignore this field.  To direct a response to the
# mailing list when this option is set, use the list-reply
# function; group-reply will reply to both the sender and the
# list.
# 
set ignore_list_reply_to=yes
# 
# set imap_authenticators=""
#
# Name: imap_authenticators
# Type: string
# Default: ""
# 
# 
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an IMAP server, in the order mutt should
# try them.  Authentication methods are either 'login' or the right
# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi'
# or 'cram-md5'. This parameter is case-insensitive. If this
# parameter is unset (the default) mutt will try all available methods,
# in order from most-secure to least-secure.
# 
# Example: set imap_authenticators="gssapi:cram-md5:login"
# 
# Note: Mutt will only fall back to other authentication methods if
# the previous methods are unavailable. If a method is available but
# authentication fails, mutt will not connect to the IMAP server.
# 
# 
# set imap_check_subscribed=no
#
# Name: imap_check_subscribed
# Type: boolean
# Default: no
# 
# 
# When set, mutt will fetch the set of subscribed folders from
# your server on connection, and add them to the set of mailboxes
# it polls for new mail. See also the ``mailboxes'' command.
# 
# 
# set imap_delim_chars="/."
#
# Name: imap_delim_chars
# Type: string
# Default: "/."
# 
# 
# This contains the list of characters which you would like to treat
# as folder separators for displaying IMAP paths. In particular it
# helps in using the '=' shortcut for your folder variable.
# 
# 
# set imap_headers=""
#
# Name: imap_headers
# Type: string
# Default: ""
# 
# 
# Mutt requests these header fields in addition to the default headers
# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
# servers before displaying the index menu. You may want to add more
# headers for spam detection. Note: This is a space separated list.
# 
# 
# set imap_idle=no
#
# Name: imap_idle
# Type: boolean
# Default: no
# 
# 
# When set, mutt will attempt to use the IMAP IDLE extension
# to check for new mail in the current mailbox. Some servers
# (dovecot was the inspiration for this option) react badly
# to mutt's implementation. If your connection seems to freeze
# up periodically, try unsetting this.
# 
# 
# set imap_keepalive=900
#
# Name: imap_keepalive
# Type: number
# Default: 900
# 
# 
# This variable specifies the maximum amount of time in seconds that mutt
# will wait before polling open IMAP connections, to prevent the server
# from closing them before mutt has finished with them. The default is
# well within the RFC-specified minimum amount of time (30 minutes) before
# a server is allowed to do this, but in practice the RFC does get
# violated every now and then. Reduce this number if you find yourself
# getting disconnected from your IMAP server due to inactivity.
# 
# 
# set imap_list_subscribed=no
#
# Name: imap_list_subscribed
# Type: boolean
# Default: no
# 
# 
# This variable configures whether IMAP folder browsing will look for
# only subscribed folders or all folders.  This can be toggled in the
# IMAP browser with the toggle-subscribed function.
# 
# 
# set imap_login=""
#
# Name: imap_login
# Type: string
# Default: ""
# 
# 
# Your login name on the IMAP server.
# 
# This variable defaults to the value of imap_user.
# 
# 
# set imap_pass=""
#
# Name: imap_pass
# Type: string
# Default: ""
# 
# 
# Specifies the password for your IMAP account.  If unset, Mutt will
# prompt you for your password when you invoke the fetch-mail function.
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your muttrc even
# if you are the only one who can read the file.
# 
# 
# set imap_passive=yes
#
# Name: imap_passive
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will not open new IMAP connections to check for new
# mail.  Mutt will only check for new mail over existing IMAP
# connections.  This is useful if you don't want to be prompted to
# user/password pairs on mutt invocation, or if opening the connection
# is slow.
# 
# 
# set imap_peek=yes
#
# Name: imap_peek
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will avoid implicitly marking your mail as read whenever
# you fetch a message from the server. This is generally a good thing,
# but can make closing an IMAP folder somewhat slower. This option
# exists to appease speed freaks.
# 
# 
# set imap_servernoise=yes
#
# Name: imap_servernoise
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will display warning messages from the IMAP
# server as error messages. Since these messages are often
# harmless, or generated due to configuration problems on the
# server which are out of the users' hands, you may wish to suppress
# them at some point.
# 
# 
# set imap_user=""
#
# Name: imap_user
# Type: string
# Default: ""
# 
# 
# The name of the user whose mail you intend to access on the IMAP
# server.
# 
# This variable defaults to your user name on the local machine.
# 
# 
# set implicit_autoview=no
#
# Name: implicit_autoview
# Type: boolean
# Default: no
# 
# 
# If set to ``yes'', mutt will look for a mailcap entry with the
# copiousoutput flag set for every MIME attachment it doesn't have
# an internal viewer defined for.  If such an entry is found, mutt will
# use the viewer defined in that entry to convert the body part to text
# form.
# 
set implicit_autoview=yes
# 
# set include=ask-yes
#
# Name: include
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether or not a copy of the message(s) you are replying to
# is included in your reply.
# 
set include=yes
# 
# set include_onlyfirst=no
#
# Name: include_onlyfirst
# Type: boolean
# Default: no
# 
# 
# Controls whether or not Mutt includes only the first attachment
# of the message you are replying.
# 
# 
# set indent_string="> "
#
# Name: indent_string
# Type: string
# Default: "> "
# 
# 
# Specifies the string to prepend to each line of text quoted in a
# message to which you are replying.  You are strongly encouraged not to
# change this value, as it tends to agitate the more fanatical netizens.
# 
# This option is a format string, please see the description of
# ``$index_format'' for supported printf()-style sequences.
# 
# 
# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
#
# Name: index_format
# Type: string
# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
# 
# 
# This variable allows you to customize the message index display to
# your personal taste.
# 
# ``Format strings'' are similar to the strings used in the ``C''
# function printf to format output (see the man page for more detail).
# The following sequences are defined in Mutt:
# 
# %a      address of the author
# %A      reply-to address (if present; otherwise: address of author)
# %b      filename of the original message folder (think mailBox)
# %B      the list to which the letter was sent, or else the folder name (%b).
# %c      number of characters (bytes) in the message
# %C      current message number
# %d      date and time of the message in the format specified by
#         ``date_format'' converted to sender's time zone
# %D      date and time of the message in the format specified by
#         ``date_format'' converted to the local time zone
# %e      current message number in thread
# %E      number of messages in current thread
# %f      sender (address + real name), either From: or Return-Path:
# %F      author name, or recipient name if the message is from you
# %H      spam attribute(s) of this message
# %i      message-id of the current message
# %l      number of lines in the message (does not work with maildir,
#         mh, and possibly IMAP folders)
# %L      If an address in the To or CC header field matches an address
#         defined by the users ``subscribe'' command, this displays
#         "To <list-name>", otherwise the same as %F.
# %m      total number of message in the mailbox
# %M      number of hidden messages if the thread is collapsed.
# %N      message score
# %n      author's real name (or address if missing)
# %O      (_O_riginal save folder)  Where mutt would formerly have
#         stashed the message: list name or recipient name if no list
# %P      progress indicator for the builtin pager (how much of the file has been displayed)
# %s      subject of the message
# %S      status of the message (N/D/d/!/r/*)
# %t      `to:' field (recipients)
# %T      the appropriate character from the $to_chars string
# %u      user (login) name of the author
# %v      first name of the author, or the recipient if the message is from you
# %X      number of attachments
#         (please see the ``attachments'' section for possible speed effects)
# %y      `x-label:' field, if present
# %Y      `x-label' field, if present, and (1) not at part of a thread tree,
#         (2) at the top of a thread, or (3) `x-label' is different from
#         preceding message's `x-label'.
# %Z      message status flags
# %{fmt}  the date and time of the message is converted to sender's
#         time zone, and ``fmt'' is expanded by the library function
#         ``strftime''; a leading bang disables locales
# %[fmt]  the date and time of the message is converted to the local
#         time zone, and ``fmt'' is expanded by the library function
#         ``strftime''; a leading bang disables locales
# %(fmt)  the local date and time when the message was received.
#         ``fmt'' is expanded by the library function ``strftime'';
#         a leading bang disables locales
# %<fmt>  the current local time. ``fmt'' is expanded by the library
#         function ``strftime''; a leading bang disables locales.
# %>X     right justify the rest of the string and pad with character "X"
# %|X     pad to the end of the line with character "X"
# %*X     soft-fill with character "X" as pad
# 
# 
# `Soft-fill' deserves some explanation. Normal right-justification
# will print everything to the left of the %>, displaying padding and
# the whatever lies to the right only if there's room. By contrast,
# soft-fill gives priority to the right-hand side, guaranteeing space
# to display it and showing padding only if there's still room. If
# necessary, soft-fill will eat text leftwards to make room for
# rightward text.
# 
# Note that these expandos are supported in 
# ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too.
# 
# See also: ``$to_chars''.
# 
#set index_format="%4C %Z %{%b %d} %-15.15F %4c %?H?[%H] ?%s" ## DEFINED BY A DEFAULT HOOK
# 
# set ispell="ispell"
#
# Name: ispell
# Type: path
# Default: "ispell"
# 
# 
# How to invoke ispell (GNU's spell-checking software).
# 
# 
# set keep_flagged=no
#
# Name: keep_flagged
# Type: boolean
# Default: no
# 
# 
# If set, read messages marked as flagged will not be moved
# from your spool mailbox to your ``$mbox'' mailbox, or as a result of
# a ``mbox-hook'' command.
# 
# 
# set locale="C"
#
# Name: locale
# Type: string
# Default: "C"
# 
# 
# The locale used by strftime(3) to format dates. Legal values are
# the strings your system accepts for the locale variable LC_TIME.
# 
# 
# set mail_check=5
#
# Name: mail_check
# Type: number
# Default: 5
# 
# 
# This variable configures how often (in seconds) mutt should look for
# new mail. Also see the ``$timeout'' variable.
# 
# 
# set mailcap_path=""
#
# Name: mailcap_path
# Type: string
# Default: ""
# 
# 
# This variable specifies which files to consult when attempting to
# display MIME bodies not directly supported by Mutt.
# 
# 
# set mailcap_sanitize=yes
#
# Name: mailcap_sanitize
# Type: boolean
# Default: yes
# 
# 
# If set, mutt will restrict possible characters in mailcap % expandos
# to a well-defined set of safe characters.  This is the safe setting,
# but we are not sure it doesn't break some more advanced MIME stuff.
# 
# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
# DOING!
# 
# 
# set header_cache=""
#
# Name: header_cache
# Type: path
# Default: ""
# 
# 
# The header_cache variable points to the header cache database.
# If header_cache points to a directory it will contain a header cache
# database  per folder. If header_cache points to a file that file will
# be a single global header cache. By default it is unset so no header
# caching will be used.
# 
set header_cache="~/.var/mutt/header_cache"
#
# set header_cache_compress=yes
#
# Name: header_cache_compress
# Type: boolean
# Default: yes
#
# When mutt is compiled with qdbm or tokyocabinet as header cache backend,
# this option determines whether the database will be compressed. Compression
# results in database files roughly being one fifth of the usual diskspace,
# but the uncompression can result in a slower opening of cached folder(s)
# which in general is still much faster than opening non header cached
# folders.
#
set header_cache_compress=no
# 
# set maildir_header_cache_verify=yes
#
# Name: maildir_header_cache_verify
# Type: boolean
# Default: yes
# 
# 
# Check for Maildir unaware programs other than mutt having modified maildir
# files when the header cache is in use.  This incurs one stat(2) per
# message every time the folder is opened.
# 
set maildir_header_cache_verify=no
# 
# set maildir_trash=no
#
# Name: maildir_trash
# Type: boolean
# Default: no
# 
# 
# If set, messages marked as deleted will be saved with the maildir
# (T)rashed flag instead of unlinked.  NOTE: this only applies
# to maildir-style mailboxes.  Setting it will have no effect on other
# mailbox types.
# 
# 
# set mark_old=yes
#
# Name: mark_old
# Type: boolean
# Default: yes
# 
# 
# Controls whether or not mutt marks new unread
# messages as old if you exit a mailbox without reading them.
# With this option set, the next time you start mutt, the messages
# will show up with an "O" next to them in the index menu,
# indicating that they are old.
# 
set mark_old=yes
# 
# set markers=yes
#
# Name: markers
# Type: boolean
# Default: yes
# 
# 
# Controls the display of wrapped lines in the internal pager. If set, a
# ``+'' marker is displayed at the beginning of wrapped lines. Also see
# the ``$smart_wrap'' variable.
# 
set markers=no
# 
# set mask="!^\\.[^.]"
#
# Name: mask
# Type: regular expression
# Default: "!^\\.[^.]"
# 
# 
# A regular expression used in the file browser, optionally preceded by
# the not operator ``!''.  Only files whose names match this mask
# will be shown. The match is always case-sensitive.
# 
# 
# set mbox="~/mbox"
#
# Name: mbox
# Type: path
# Default: "~/mbox"
# 
# 
# This specifies the folder into which read mail in your ``$spoolfile''
# folder will be appended.
# 
# 
# set mbox_type=mbox
#
# Name: mbox_type
# Type: folder magic
# Default: mbox
# 
# 
# The default mailbox type used when creating new folders. May be any of
# mbox, MMDF, MH and Maildir.
# 
set mbox_type=Maildir
# 
# set metoo=no
#
# Name: metoo
# Type: boolean
# Default: no
# 
# 
# If unset, Mutt will remove your address (see the ``alternates''
# command) from the list of recipients when replying to a message.
# 
# 
# set menu_context=0
#
# Name: menu_context
# Type: number
# Default: 0
# 
set menu_context=2
# 
# This variable controls the number of lines of context that are given
# when scrolling through menus. (Similar to ``$pager_context''.)
# 
# 
# set menu_move_off=yes
#
# Name: menu_move_off
# Type: boolean
# Default: yes
# 
# 
# When unset, the bottom entry of menus will never scroll up past
# the bottom of the screen, unless there are less entries than lines.
# When set, the bottom entry may move off the bottom.
# 
# 
# set menu_scroll=no
#
# Name: menu_scroll
# Type: boolean
# Default: no
# 
set menu_scroll=yes
# 
# When set, menus will be scrolled up or down one line when you
# attempt to move across a screen boundary.  If unset, the screen
# is cleared and the next or previous page of the menu is displayed
# (useful for slow links to avoid many redraws).
# 
# 
# set meta_key=no
#
# Name: meta_key
# Type: boolean
# Default: no
# 
# 
# If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
# set as if the user had pressed the ESC key and whatever key remains
# after having the high bit removed.  For example, if the key pressed
# has an ASCII value of 0xf8, then this is treated as if the user had
# pressed ESC then ``x''.  This is because the result of removing the
# high bit from ``0xf8'' is ``0x78'', which is the ASCII character
# ``x''.
# 
# 
# set mh_purge=no
#
# Name: mh_purge
# Type: boolean
# Default: no
# 
# 
# When unset, mutt will mimic mh's behaviour and rename deleted messages
# to ,<old file name> in mh folders instead of really deleting
# them.  If the variable is set, the message files will simply be
# deleted.
# 
# 
# set mh_seq_flagged="flagged"
#
# Name: mh_seq_flagged
# Type: string
# Default: "flagged"
# 
# 
# The name of the MH sequence used for flagged messages.
# 
# 
# set mh_seq_replied="replied"
#
# Name: mh_seq_replied
# Type: string
# Default: "replied"
# 
# 
# The name of the MH sequence used to tag replied messages.
# 
# 
# set mh_seq_unseen="unseen"
#
# Name: mh_seq_unseen
# Type: string
# Default: "unseen"
# 
# 
# The name of the MH sequence used for unseen messages.
# 
# 
# set mime_forward=no
#
# Name: mime_forward
# Type: quadoption
# Default: no
# 
# 
# When set, the message you are forwarding will be attached as a
# separate MIME part instead of included in the main body of the
# message.  This is useful for forwarding MIME messages so the receiver
# can properly view the message as it was delivered to you. If you like
# to switch between MIME and not MIME from mail to mail, set this
# variable to ask-no or ask-yes.
# 
# Also see ``$forward_decode'' and ``$mime_forward_decode''.
# 
set mime_forward=ask-yes
# 
# set mime_forward_decode=no
#
# Name: mime_forward_decode
# Type: boolean
# Default: no
# 
# 
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message while ``$mime_forward'' is set. Otherwise
# ``$forward_decode'' is used instead.
# 
# 
# set mime_forward_rest=yes
#
# Name: mime_forward_rest
# Type: quadoption
# Default: yes
# 
# 
# When forwarding multiple attachments of a MIME message from the recvattach
# menu, attachments which cannot be decoded in a reasonable manner will
# be attached to the newly composed message if this option is set.
# 
# 
# set pgp_mime_signature_filename="signature.asc"
#
# Name: pgp_mime_signature_filename
# Type: string
# Default: "signature.asc"
# 
# 
# This option sets the filename used for signature parts in PGP/MIME
# signed messages.
# 
set pgp_mime_signature_filename="digital_signature_gpg.asc"
# 
# set pgp_mime_signature_description="Digital signature"
#
# Name: pgp_mime_signature_description
# Type: string
# Default: "Digital signature"
# 
set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/)"
# 
# This option sets the Content-Description used for signature parts in
# PGP/MIME signed messages.
# 
# 
# set mix_entry_format="%4n %c %-16s %a"
#
# Name: mix_entry_format
# Type: string
# Default: "%4n %c %-16s %a"
# 
# 
# This variable describes the format of a remailer line on the mixmaster
# chain selection screen.  The following printf-like sequences are 
# supported:
# 
# %n      The running number on the menu.
# %c      Remailer capabilities.
# %s      The remailer's short name.
# %a      The remailer's e-mail address.
# 
# 
# set mixmaster="mixmaster"
#
# Name: mixmaster
# Type: path
# Default: "mixmaster"
# 
# 
# This variable contains the path to the Mixmaster binary on your
# system.  It is used with various sets of parameters to gather the
# list of known remailers, and to finally send a message through the
# mixmaster chain.
# 
# Note: On Debian systems, this option is set by default to
# ``mixmaster-filter'' in /etc/Muttrc.
# 
# 
# set move=ask-no
#
# Name: move
# Type: quadoption
# Default: ask-no
# 
# 
# Controls whether or not Mutt will move read messages
# from your spool mailbox to your ``$mbox'' mailbox, or as a result of
# a ``mbox-hook'' command.
# 
set move=no
# 
# set message_cachedir=""
#
# Name: message_cachedir
# Type: path
# Default: ""
# 
# 
# Set this to a directory and mutt will cache copies of messages from
# your IMAP and POP servers here. You are free to remove entries at any
# time, for instance if stale entries accumulate because you have
# deleted messages with another mail client.
# 
# 
# set message_cache_clean=no
#
# Name: message_cache_clean
# Type: boolean
# Default: no
# 
# 
# If set, mutt will clean out obsolete entries from the cache when
# the mailbox is synchronized. You probably only want to set it
# every once in a while, since it can be a little slow.
# 
# 
# set message_format="%s"
#
# Name: message_format
# Type: string
# Default: "%s"
# 
# 
# This is the string displayed in the ``attachment'' menu for
# attachments of type message/rfc822.  For a full listing of defined
# printf()-like sequences see the section on ``$index_format''.
# 
# 
# set narrow_tree=no
#
# Name: narrow_tree
# Type: boolean
# Default: no
# 
# 
# This variable, when set, makes the thread tree narrower, allowing
# deeper threads to fit on the screen.
# 
set narrow_tree=yes
# 
# set net_inc=10
#
# Name: net_inc
# Type: number
# Default: 10
# 
# 
# Operations that expect to transfer a large amount of data over the
# network will update their progress every net_inc kilobytes.
# If set to 0, no progress messages will be displayed.
# 
# See also ``$read_inc'' and ``$write_inc''.
# 
# 
# set pager="builtin"
#
# Name: pager
# Type: path
# Default: "builtin"
# 
# 
# This variable specifies which pager you would like to use to view
# messages.  builtin means to use the builtin pager, otherwise this
# variable should specify the pathname of the external pager you would
# like to use.
# 
# Using an external pager may have some disadvantages: Additional
# keystrokes are necessary because you can't call mutt functions
# directly from the pager, and screen resizes cause lines longer than
# the screen width to be badly formatted in the help menu.
# 
# 
# set pager_context=0
#
# Name: pager_context
# Type: number
# Default: 0
# 
# 
# This variable controls the number of lines of context that are given
# when displaying the next or previous page in the internal pager.  By
# default, Mutt will display the line after the last one on the screen
# at the top of the next page (0 lines of context).
# 
set pager_context=2
# 
# set pager_format="-%Z- %C/%m: %-20.20n   %s%*  -- (%P)"
#
# Name: pager_format
# Type: string
# Default: "-%Z- %C/%m: %-20.20n   %s%*  -- (%P)"
# 
# 
# This variable controls the format of the one-line message ``status''
# displayed before each message in either the internal or an external
# pager.  The valid sequences are listed in the ``$index_format''
# section.
# 
set pager_format="<%a> %*  %i (%P)"
# 
# set pager_index_lines=0
#
# Name: pager_index_lines
# Type: number
# Default: 0
# 
# ## SET BY A DEFAULT HOOK
# 
# Determines the number of lines of a mini-index which is shown when in
# the pager.  The current message, unless near the top or bottom of the
# folder, will be roughly one third of the way down this mini-index,
# giving the reader the context of a few messages before and after the
# message.  This is useful, for example, to determine how many messages
# remain to be read in the current thread.  One of the lines is reserved
# for the status bar from the index, so a pager_index_lines of 6
# will only show 5 lines of the actual index.  A value of 0 results in
# no index being shown.  If the number of messages in the current folder
# is less than pager_index_lines, then the index will only use as
# many lines as it needs.
# 
set pager_index_lines=5
# 
# set pager_stop=no
#
# Name: pager_stop
# Type: boolean
# Default: no
# 
# 
# When set, the internal-pager will not move to the next message
# when you are at the end of a message and invoke the next-page
# function.
# 
set pager_stop=yes
# 
# set crypt_autosign=no
#
# Name: crypt_autosign
# Type: boolean
# Default: no
# 
# 
# Setting this variable will cause Mutt to always attempt to
# cryptographically sign outgoing messages.  This can be overridden
# by use of the pgp-menu, when signing is not required or
# encryption is requested as well. If ``$smime_is_default'' is set,
# then OpenSSL is used instead to create S/MIME messages and settings can
# be overridden by use of the smime-menu.
# (Crypto only)
# 
set crypt_autosign=yes
# 
# set crypt_autoencrypt=no
#
# Name: crypt_autoencrypt
# Type: boolean
# Default: no
# 
# 
# Setting this variable will cause Mutt to always attempt to PGP
# encrypt outgoing messages.  This is probably only useful in
# connection to the send-hook command.  It can be overridden
# by use of the pgp-menu, when encryption is not required or
# signing is requested as well.  IF ``$smime_is_default'' is set,
# then OpenSSL is used instead to create S/MIME messages and
# settings can be overridden by use of the smime-menu.
# (Crypto only)
# 
# 
# set pgp_ignore_subkeys=yes
#
# Name: pgp_ignore_subkeys
# Type: boolean
# Default: yes
# 
# 
# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
# the principal key will inherit the subkeys' capabilities.  Unset this
# if you want to play interesting key selection games.
# (PGP only)
# 
# 
# set crypt_replyencrypt=yes
#
# Name: crypt_replyencrypt
# Type: boolean
# Default: yes
# 
# 
# If set, automatically PGP or OpenSSL encrypt replies to messages which are
# encrypted.
# (Crypto only)
# 
# 
# set crypt_replysign=no
#
# Name: crypt_replysign
# Type: boolean
# Default: no
# 
# 
# If set, automatically PGP or OpenSSL sign replies to messages which are
# signed.
# 
# Note: this does not work on messages that are encrypted
# and signed!
# (Crypto only)
# 
set crypt_replysign=yes
# 
# set crypt_replysignencrypted=no
#
# Name: crypt_replysignencrypted
# Type: boolean
# Default: no
# 
# 
# If set, automatically PGP or OpenSSL sign replies to messages
# which are encrypted. This makes sense in combination with
# ``$crypt_replyencrypt'', because it allows you to sign all
# messages which are automatically encrypted.  This works around
# the problem noted in ``$crypt_replysign'', that mutt is not able
# to find out whether an encrypted message is also signed.
# (Crypto only)
# 
set crypt_replysignencrypted=yes
# 
# set crypt_timestamp=yes
#
# Name: crypt_timestamp
# Type: boolean
# Default: yes
# 
# 
# If set, mutt will include a time stamp in the lines surrounding
# PGP or S/MIME output, so spoofing such lines is more difficult.
# If you are using colors to mark these lines, and rely on these,
# you may unset this setting.
# (Crypto only)
# 
# 
# set pgp_use_gpg_agent=no
#
# Name: pgp_use_gpg_agent
# Type: boolean
# Default: no
# 
# 
# If set, mutt will use a possibly-running gpg-agent process.
# (PGP only)
# 
set pgp_use_gpg_agent=yes
# 
# set crypt_verify_sig=yes
#
# Name: crypt_verify_sig
# Type: quadoption
# Default: yes
# 
# 
# If ``yes'', always attempt to verify PGP or S/MIME signatures.
# If ``ask'', ask whether or not to verify the signature. 
# If ``no'', never attempt to verify cryptographic signatures.
# (Crypto only)
# 
# 
# set smime_is_default=no
#
# Name: smime_is_default
# Type: boolean
# Default: no
# 
# 
# The default behaviour of mutt is to use PGP on all auto-sign/encryption
# operations. To override and to use OpenSSL instead this must be set.
# However, this has no effect while replying, since mutt will automatically 
# select the same application that was used to sign/encrypt the original
# message.  (Note that this variable can be overridden by unsetting $crypt_autosmime.)
# (S/MIME only)
# 
# 
# set smime_ask_cert_label=yes
#
# Name: smime_ask_cert_label
# Type: boolean
# Default: yes
# 
# 
# This flag controls whether you want to be asked to enter a label
# for a certificate about to be added to the database or not. It is
# set by default.
# (S/MIME only)
# 
# 
# set smime_decrypt_use_default_key=yes
#
# Name: smime_decrypt_use_default_key
# Type: boolean
# Default: yes
# 
# 
# If set (default) this tells mutt to use the default key for decryption. Otherwise,
# if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address
# to determine the key to use. It will ask you to supply a key, if it can't find one.
# (S/MIME only)
# 
# 
# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
#
# Name: pgp_entry_format
# Type: string
# Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
# 
# 
# This variable allows you to customize the PGP key selection menu to
# your personal taste. This string is similar to ``$index_format'', but
# has its own set of printf()-like sequences:
# 
# %n      number
# %k      key id
# %u      user id
# %a      algorithm
# %l      key length
# %f      flags
# %c      capabilities
# %t      trust/validity of the key-uid association
# %[<s>]  date of the key where <s> is an strftime(3) expression
# 
# 
# (PGP only)
# 
# 
# set pgp_good_sign=""
#
# Name: pgp_good_sign
# Type: regular expression
# Default: ""
# 
# 
# If you assign a text to this variable, then a PGP signature is only
# considered verified if the output from $pgp_verify_command contains
# the text. Use this variable if the exit code from the command is 0
# even for bad signatures.
# (PGP only)
# 
# 
# set pgp_check_exit=yes
#
# Name: pgp_check_exit
# Type: boolean
# Default: yes
# 
# 
# If set, mutt will check the exit code of the PGP subprocess when
# signing or encrypting.  A non-zero exit code means that the
# subprocess failed.
# (PGP only)
# 
# 
# set pgp_long_ids=no
#
# Name: pgp_long_ids
# Type: boolean
# Default: no
# 
# 
# If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
# (PGP only)
# 
# 
# set pgp_retainable_sigs=no
#
# Name: pgp_retainable_sigs
# Type: boolean
# Default: no
# 
# 
# If set, signed and encrypted messages will consist of nested
# multipart/signed and multipart/encrypted body parts.
# 
# This is useful for applications like encrypted and signed mailing
# lists, where the outer layer (multipart/encrypted) can be easily
# removed, while the inner multipart/signed part is retained.
# (PGP only)
# 
set pgp_retainable_sigs=yes
# 
# set pgp_autoinline=no
#
# Name: pgp_autoinline
# Type: boolean
# Default: no
# 
# 
# This option controls whether Mutt generates old-style inline
# (traditional) PGP encrypted or signed messages under certain
# circumstances.  This can be overridden by use of the pgp-menu,
# when inline is not required.
# 
# Note that Mutt might automatically use PGP/MIME for messages
# which consist of more than a single MIME part.  Mutt can be
# configured to ask before sending PGP/MIME messages when inline
# (traditional) would not work.
# See also: ``$pgp_mime_auto''.
# 
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
# 
# 
# set pgp_replyinline=no
#
# Name: pgp_replyinline
# Type: boolean
# Default: no
# 
# 
# Setting this variable will cause Mutt to always attempt to
# create an inline (traditional) message when replying to a
# message which is PGP encrypted/signed inline.  This can be
# overridden by use of the pgp-menu, when inline is not
# required.  This option does not automatically detect if the
# (replied-to) message is inline; instead it relies on Mutt
# internals for previously checked/flagged messages.
# 
# Note that Mutt might automatically use PGP/MIME for messages
# which consist of more than a single MIME part.  Mutt can be
# configured to ask before sending PGP/MIME messages when inline
# (traditional) would not work.
# See also: ``$pgp_mime_auto''.
# 
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
# 
# 
# set pgp_show_unusable=yes
#
# Name: pgp_show_unusable
# Type: boolean
# Default: yes
# 
# 
# If set, mutt will display non-usable keys on the PGP key selection
# menu.  This includes keys which have been revoked, have expired, or
# have been marked as ``disabled'' by the user.
# (PGP only)
# 
# 
# set pgp_sign_as=""
#
# Name: pgp_sign_as
# Type: string
# Default: ""
# 
# 
# If you have more than one key pair, this option allows you to specify
# which of your private keys to use.  It is recommended that you use the
# keyid form to specify your key (e.g., ``0x00112233'').
# (PGP only)
# 
set pgp_sign_as="0x330c4a75"
# 
# set pgp_strict_enc=yes
#
# Name: pgp_strict_enc
# Type: boolean
# Default: yes
# 
# 
# If set, Mutt will automatically encode PGP/MIME signed messages as
# quoted-printable.  Please note that unsetting this variable may
# lead to problems with non-verifyable PGP signatures, so only change
# this if you know what you are doing.
# (PGP only)
# 
# 
# set pgp_timeout=300
#
# Name: pgp_timeout
# Type: number
# Default: 300
# 
# 
# The number of seconds after which a cached passphrase will expire if
# not used.
# (PGP only)
# 
# 
# set pgp_sort_keys=address
#
# Name: pgp_sort_keys
# Type: sort order
# Default: address
# 
# 
# Specifies how the entries in the `pgp keys' menu are sorted. The
# following are legal values:
# 
# address sort alphabetically by user id
# keyid   sort alphabetically by key id
# date    sort by key creation date
# trust   sort by the trust of the key
# 
# 
# If you prefer reverse order of the above values, prefix it with
# `reverse-'.
# (PGP only)
# 
# 
# set pgp_mime_auto=ask-yes
#
# Name: pgp_mime_auto
# Type: quadoption
# Default: ask-yes
# 
# 
# This option controls whether Mutt will prompt you for
# automatically sending a (signed/encrypted) message using
# PGP/MIME when inline (traditional) fails (for any reason).
# 
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
# 
# 
# set pgp_auto_decode=no
#
# Name: pgp_auto_decode
# Type: boolean
# Default: no
# 
# 
# If set, mutt will automatically attempt to decrypt traditional PGP
# messages whenever the user performs an operation which ordinarily would
# result in the contents of the message being operated on.  For example,
# if the user displays a pgp-traditional message which has not been manually
# checked with the check-traditional-pgp function, mutt will automatically
# check the message for traditional pgp.
# 
set pgp_auto_decode=yes
# 
# set pgp_decode_command=""
#
# Name: pgp_decode_command
# Type: string
# Default: ""
# 
# 
# This format strings specifies a command which is used to decode 
# application/pgp attachments.
# 
# The PGP command formats have their own set of printf-like sequences:
# 
# %p      Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
#         string otherwise. Note: This may be used with a %? construct.
# %f      Expands to the name of a file containing a message.
# %s      Expands to the name of a file containing the signature part
#                    of a multipart/signed attachment when verifying it.
# %a      The value of $pgp_sign_as.
# %r      One or more key IDs.
# 
# 
# For examples on how to configure these formats for the various versions
# of PGP which are floating around, see the pgp*.rc and gpg.rc files in
# the samples/ subdirectory which has been installed on your system
# alongside the documentation.
# (PGP only)
# 
# 
# set pgp_getkeys_command=""
#
# Name: pgp_getkeys_command
# Type: string
# Default: ""
# 
# 
# This command is invoked whenever mutt will need public key information.
# %r is the only printf-like sequence used with this format.
# (PGP only)
# 
# 
# set pgp_verify_command=""
#
# Name: pgp_verify_command
# Type: string
# Default: ""
# 
# 
# This command is used to verify PGP signatures.
# (PGP only)
# 
# 
# set pgp_decrypt_command=""
#
# Name: pgp_decrypt_command
# Type: string
# Default: ""
# 
# 
# This command is used to decrypt a PGP encrypted message.
# (PGP only)
# 
# 
# set pgp_clearsign_command=""
#
# Name: pgp_clearsign_command
# Type: string
# Default: ""
# 
# 
# This format is used to create a old-style "clearsigned" PGP
# message.  Note that the use of this format is strongly
# deprecated.
# (PGP only)
# 
# 
# set pgp_sign_command=""
#
# Name: pgp_sign_command
# Type: string
# Default: ""
# 
# 
# This command is used to create the detached PGP signature for a 
# multipart/signed PGP/MIME body part.
# (PGP only)
# 
# 
# set pgp_encrypt_sign_command=""
#
# Name: pgp_encrypt_sign_command
# Type: string
# Default: ""
# 
# 
# This command is used to both sign and encrypt a body part.
# (PGP only)
# 
# 
# set pgp_encrypt_only_command=""
#
# Name: pgp_encrypt_only_command
# Type: string
# Default: ""
# 
# 
# This command is used to encrypt a body part without signing it.
# (PGP only)
# 
# 
# set pgp_import_command=""
#
# Name: pgp_import_command
# Type: string
# Default: ""
# 
# 
# This command is used to import a key from a message into 
# the user's public key ring.
# (PGP only)
# 
# 
# set pgp_export_command=""
#
# Name: pgp_export_command
# Type: string
# Default: ""
# 
# 
# This command is used to export a public key from the user's
# key ring.
# (PGP only)
# 
# 
# set pgp_verify_key_command=""
#
# Name: pgp_verify_key_command
# Type: string
# Default: ""
# 
# 
# This command is used to verify key information from the key selection
# menu.
# (PGP only)
# 
# 
# set pgp_list_secring_command=""
#
# Name: pgp_list_secring_command
# Type: string
# Default: ""
# 
# 
# This command is used to list the secret key ring's contents.  The
# output format must be analogous to the one used by 
# gpg --list-keys --with-colons.
# 
# This format is also generated by the pgpring utility which comes 
# with mutt.
# (PGP only)
# 
# 
# set pgp_list_pubring_command=""
#
# Name: pgp_list_pubring_command
# Type: string
# Default: ""
# 
# 
# This command is used to list the public key ring's contents.  The
# output format must be analogous to the one used by 
# gpg --list-keys --with-colons.
# 
# This format is also generated by the pgpring utility which comes 
# with mutt.
# (PGP only)
# 
# 
# set forward_decrypt=yes
#
# Name: forward_decrypt
# Type: boolean
# Default: yes
# 
# 
# Controls the handling of encrypted messages when forwarding a message.
# When set, the outer layer of encryption is stripped off.  This
# variable is only used if ``$mime_forward'' is set and
# ``$mime_forward_decode'' is unset.
# (PGP only)
# 
# 
# set smime_timeout=300
#
# Name: smime_timeout
# Type: number
# Default: 300
# 
# 
# The number of seconds after which a cached passphrase will expire if
# not used.
# (S/MIME only)
# 
# 
# set smime_encrypt_with=""
#
# Name: smime_encrypt_with
# Type: string
# Default: ""
# 
# 
# This sets the algorithm that should be used for encryption.
# Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128".
# If unset "3des" (TripleDES) is used.
# (S/MIME only)
# 
# 
# set smime_keys=""
#
# Name: smime_keys
# Type: path
# Default: ""
# 
# 
# Since there is no pubring/secring as with PGP, mutt has to handle
# storage ad retrieval of keys/certs by itself. This is very basic right now,
# and stores keys and certificates in two different directories, both
# named as the hash-value retrieved from OpenSSL. There is an index file
# which contains mailbox-address keyid pair, and which can be manually
# edited. This one points to the location of the private keys.
# (S/MIME only)
# 
set smime_keys="~/.smime/keys"
# 
# set smime_ca_location=""
#
# Name: smime_ca_location
# Type: path
# Default: ""
# 
# 
# This variable contains the name of either a directory, or a file which
# contains trusted certificates for use with OpenSSL.
# (S/MIME only)
# 
# Note: On Debian systems, this defaults to the first existing file in
# the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt
# /etc/ssl/certs/ca-certificates.crt.
# 
# 
# set smime_certificates=""
#
# Name: smime_certificates
# Type: path
# Default: ""
# 
# 
# Since there is no pubring/secring as with PGP, mutt has to handle
# storage and retrieval of keys by itself. This is very basic right
# now, and keys and certificates are stored in two different
# directories, both named as the hash-value retrieved from
# OpenSSL. There is an index file which contains mailbox-address
# keyid pairs, and which can be manually edited. This one points to
# the location of the certificates.
# (S/MIME only)
# 
set smime_certificates="~/.smime/certificates"
# 
# set smime_decrypt_command=""
#
# Name: smime_decrypt_command
# Type: string
# Default: ""
# 
# 
# This format string specifies a command which is used to decrypt
# application/x-pkcs7-mime attachments.
# 
# The OpenSSL command formats have their own set of printf-like sequences
# similar to PGP's:
# 
# %f      Expands to the name of a file containing a message.
# %s      Expands to the name of a file containing the signature part
#                    of a multipart/signed attachment when verifying it.
# %k      The key-pair specified with $smime_default_key
# %c      One or more certificate IDs.
# %a      The algorithm used for encryption.
# %C      CA location:  Depending on whether $smime_ca_location
#                    points to a directory or file, this expands to 
#                    "-CApath $smime_ca_location" or "-CAfile $smime_ca_location".
# 
# 
# For examples on how to configure these formats, see the smime.rc in
# the samples/ subdirectory which has been installed on your system
# alongside the documentation.
# (S/MIME only)
# 
# 
# set smime_verify_command=""
#
# Name: smime_verify_command
# Type: string
# Default: ""
# 
# 
# This command is used to verify S/MIME signatures of type multipart/signed.
# (S/MIME only)
# 
# 
# set smime_verify_opaque_command=""
#
# Name: smime_verify_opaque_command
# Type: string
# Default: ""
# 
# 
# This command is used to verify S/MIME signatures of type
# application/x-pkcs7-mime.
# (S/MIME only)
# 
# 
# set smime_sign_command=""
#
# Name: smime_sign_command
# Type: string
# Default: ""
# 
# 
# This command is used to created S/MIME signatures of type
# multipart/signed, which can be read by all mail clients.
# (S/MIME only)
# 
# 
# set smime_sign_opaque_command=""
#
# Name: smime_sign_opaque_command
# Type: string
# Default: ""
# 
# 
# This command is used to created S/MIME signatures of type
# application/x-pkcs7-signature, which can only be handled by mail
# clients supporting the S/MIME extension.
# (S/MIME only)
# 
# 
# set smime_encrypt_command=""
#
# Name: smime_encrypt_command
# Type: string
# Default: ""
# 
# 
# This command is used to create encrypted S/MIME messages.
# (S/MIME only)
# 
# 
# set smime_pk7out_command=""
#
# Name: smime_pk7out_command
# Type: string
# Default: ""
# 
# 
# This command is used to extract PKCS7 structures of S/MIME signatures,
# in order to extract the public X509 certificate(s).
# (S/MIME only)
# 
# 
# set smime_get_cert_command=""
#
# Name: smime_get_cert_command
# Type: string
# Default: ""
# 
# 
# This command is used to extract X509 certificates from a PKCS7 structure.
# (S/MIME only)
# 
# 
# set smime_get_signer_cert_command=""
#
# Name: smime_get_signer_cert_command
# Type: string
# Default: ""
# 
# 
# This command is used to extract only the signers X509 certificate from a S/MIME
# signature, so that the certificate's owner may get compared to the
# email's 'From'-field.
# (S/MIME only)
# 
# 
# set smime_import_cert_command=""
#
# Name: smime_import_cert_command
# Type: string
# Default: ""
# 
# 
# This command is used to import a certificate via smime_keys.
# (S/MIME only)
# 
# 
# set smime_get_cert_email_command=""
#
# Name: smime_get_cert_email_command
# Type: string
# Default: ""
# 
# 
# This command is used to extract the mail address(es) used for storing
# X509 certificates, and for verification purposes (to check whether the
# certificate was issued for the sender's mailbox).
# (S/MIME only)
# 
# 
# set smime_default_key=""
#
# Name: smime_default_key
# Type: string
# Default: ""
# 
# 
# This is the default key-pair to use for signing. This must be set to the
# keyid (the hash-value that OpenSSL generates) to work properly
# (S/MIME only)
# 
set smime_default_key="a350124a.0"
# 
# set ssl_force_tls=no
#
# Name: ssl_force_tls
# Type: boolean
# Default: no
# 
# 
# If this variable is set, Mutt will require that all connections
# to remote servers be encrypted. Furthermore it will attempt to
# negotiate TLS even if the server does not advertise the capability,
# since it would otherwise have to abort the connection anyway. This
# option supersedes ``$ssl_starttls''.
# 
# 
# set ssl_starttls=yes
#
# Name: ssl_starttls
# Type: quadoption
# Default: yes
# 
# 
# If set (the default), mutt will attempt to use STARTTLS on servers
# advertising the capability. When unset, mutt will not attempt to
# use STARTTLS regardless of the server's capabilities.
# 
# 
# set certificate_file="~/.mutt_certificates"
#
# Name: certificate_file
# Type: path
# Default: "~/.mutt_certificates"
# 
# 
# This variable specifies the file where the certificates you trust
# are saved. When an unknown certificate is encountered, you are asked
# if you accept it or not. If you accept it, the certificate can also 
# be saved in this file and further connections are automatically 
# accepted.
# 
# You can also manually add CA certificates in this file. Any server
# certificate that is signed with one of these CA certificates are 
# also automatically accepted.
# 
# Example: set certificate_file=~/.mutt/certificates
# 
# 
# set ssl_use_sslv3=yes
#
# Name: ssl_use_sslv3
# Type: boolean
# Default: yes
# 
# 
# This variables specifies whether to attempt to use SSLv3 in the
# SSL authentication process.
# 
# 
# set ssl_use_tlsv1=yes
#
# Name: ssl_use_tlsv1
# Type: boolean
# Default: yes
# 
# 
# This variables specifies whether to attempt to use TLSv1 in the
# SSL authentication process.
# 
# 
# set ssl_min_dh_prime_bits=0
#
# Name: ssl_min_dh_prime_bits
# Type: number
# Default: 0
# 
# 
# This variable specifies the minimum acceptable prime size (in bits)
# for use in any Diffie-Hellman key exchange. A value of 0 will use
# the default from the GNUTLS library.
# 
# 
# set ssl_ca_certificates_file=""
#
# Name: ssl_ca_certificates_file
# Type: path
# Default: ""
# 
# 
# This variable specifies a file containing trusted CA certificates.
# Any server certificate that is signed with one of these CA
# certificates are also automatically accepted.
# 
# Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
# 
# Note: On Debian systems, this variable defaults to the example
# mentioned. This file is managed by the ``ca-certificates'' package.
# 
# 
# set pipe_split=no
#
# Name: pipe_split
# Type: boolean
# Default: no
# 
# 
# Used in connection with the pipe-message command and the ``tag-
# prefix'' operator.  If this variable is unset, when piping a list of
# tagged messages Mutt will concatenate the messages and will pipe them
# as a single folder.  When set, Mutt will pipe the messages one by one.
# In both cases the messages are piped in the current sorted order,
# and the ``$pipe_sep'' separator is added after each message.
# 
# 
# set pipe_decode=no
#
# Name: pipe_decode
# Type: boolean
# Default: no
# 
# 
# Used in connection with the pipe-message command.  When unset,
# Mutt will pipe the messages without any preprocessing. When set, Mutt
# will weed headers and will attempt to PGP/MIME decode the messages
# first.
# 
set pipe_decode
# 
# set pipe_sep="\n"
#
# Name: pipe_sep
# Type: string
# Default: "\n"
# 
# 
# The separator to add between messages when piping a list of tagged
# messages to an external Unix command.
# 
# 
# set pop_authenticators=""
#
# Name: pop_authenticators
# Type: string
# Default: ""
# 
# 
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an POP server, in the order mutt should
# try them.  Authentication methods are either 'user', 'apop' or any
# SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'.
# This parameter is case-insensitive. If this parameter is unset
# (the default) mutt will try all available methods, in order from
# most-secure to least-secure.
# 
# Example: set pop_authenticators="digest-md5:apop:user"
# 
# 
# set pop_auth_try_all=yes
#
# Name: pop_auth_try_all
# Type: boolean
# Default: yes
# 
# 
# If set, Mutt will try all available methods. When unset, Mutt will
# only fall back to other authentication methods if the previous
# methods are unavailable. If a method is available but authentication
# fails, Mutt will not connect to the POP server.
# 
# 
# set pop_checkinterval=60
#
# Name: pop_checkinterval
# Type: number
# Default: 60
# 
# 
# This variable configures how often (in seconds) mutt should look for
# new mail in the currently selected mailbox if it is a POP mailbox.
# 
# 
# set pop_delete=ask-no
#
# Name: pop_delete
# Type: quadoption
# Default: ask-no
# 
# 
# If set, Mutt will delete successfully downloaded messages from the POP
# server when using the fetch-mail function.  When unset, Mutt will
# download messages but also leave them on the POP server.
# 
# 
# set pop_host=""
#
# Name: pop_host
# Type: string
# Default: ""
# 
# 
# The name of your POP server for the fetch-mail function.  You
# can also specify an alternative port, username and password, ie:
# 
# [pop[s]://][username[:password]@]popserver[:port]
# 
# 
# set pop_last=no
#
# Name: pop_last
# Type: boolean
# Default: no
# 
# 
# If this variable is set, mutt will try to use the "LAST" POP command
# for retrieving only unread messages from the POP server when using
# the fetch-mail function.
# 
# 
# set pop_reconnect=ask-yes
#
# Name: pop_reconnect
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether or not Mutt will try to reconnect to POP server if
# the connection is lost.
# 
# 
# set pop_user=""
#
# Name: pop_user
# Type: string
# Default: ""
# 
# 
# Your login name on the POP server.
# 
# This variable defaults to your user name on the local machine.
# 
# 
# set pop_pass=""
#
# Name: pop_pass
# Type: string
# Default: ""
# 
# 
# Specifies the password for your POP account.  If unset, Mutt will
# prompt you for your password when you open POP mailbox.
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your muttrc
# even if you are the only one who can read the file.
# 
# 
# set post_indent_string=""
#
# Name: post_indent_string
# Type: string
# Default: ""
# 
# 
# Similar to the ``$attribution'' variable, Mutt will append this
# string after the inclusion of a message which is being replied to.
# 
# 
# set postpone=ask-yes
#
# Name: postpone
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether or not messages are saved in the ``$postponed''
# mailbox when you elect not to send immediately. Also see the
# ``$recall'' variable.
# 
# 
# set postponed="~/postponed"
#
# Name: postponed
# Type: path
# Default: "~/postponed"
# 
# 
# Mutt allows you to indefinitely ``postpone sending a message'' which
# you are editing.  When you choose to postpone a message, Mutt saves it
# in the mailbox specified by this variable.  Also see the ``$postpone''
# variable.
# 
set postponed="=drafts"
# 
# set preconnect=""
#
# Name: preconnect
# Type: string
# Default: ""
# 
# 
# If set, a shell command to be executed if mutt fails to establish
# a connection to the server. This is useful for setting up secure
# connections, e.g. with ssh(1). If the command returns a  nonzero
# status, mutt gives up opening the server. Example:
# 
# preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net
# sleep 20 < /dev/null > /dev/null"
# 
# Mailbox 'foo' on mailhost.net can now be reached
# as '{localhost:1234}foo'.
# 
# NOTE: For this example to work, you must be able to log in to the
# remote machine without having to enter a password.
# 
# 
# set print=ask-no
#
# Name: print
# Type: quadoption
# Default: ask-no
# 
# 
# Controls whether or not Mutt really prints messages.
# This is set to ask-no by default, because some people
# accidentally hit ``p'' often (like me).
# 
# 
# set print_command="lpr"
#
# Name: print_command
# Type: path
# Default: "lpr"
# 
# 
# This specifies the command pipe that should be used to print messages.

set print_command="iconv -s -tlatin1//TRANSLIT | a2ps -=mail -Xlatin1 --title='%D{%Y.%m.%d.%H%M%S}-\$t2-\$t1' -B --borders=no --header='\$t2: \$t1' --left-footer='#?l!%E!#?v|%E|%s./%s#|!' --right-footer='#?l!%s./%s#!#?v|%s./%s#|%E|!' -cl100 -1qP cupspdf"

# 
# set print_decode=yes
#
# Name: print_decode
# Type: boolean
# Default: yes
# 
# 
# Used in connection with the print-message command.  If this
# option is set, the message is decoded before it is passed to the
# external command specified by $print_command.  If this option
# is unset, no processing will be applied to the message when
# printing it.  The latter setting may be useful if you are using
# some advanced printer filter which is able to properly format
# e-mail messages for printing.
# 
# 
# set print_split=no
#
# Name: print_split
# Type: boolean
# Default: no
# 
# 
# Used in connection with the print-message command.  If this option
# is set, the command specified by $print_command is executed once for
# each message which is to be printed.  If this option is unset, 
# the command specified by $print_command is executed only once, and
# all the messages are concatenated, with a form feed as the message
# separator.
# 
# Those who use the enscript(1) program's mail-printing mode will
# most likely want to set this option.
#
set print_split=yes
# 
# set prompt_after=yes
#
# Name: prompt_after
# Type: boolean
# Default: yes
# 
# 
# If you use an external ``$pager'', setting this variable will
# cause Mutt to prompt you for a command when the pager exits rather
# than returning to the index menu.  If unset, Mutt will return to the
# index menu when the external pager exits.
# 
# 
# set query_command=""
#
# Name: query_command
# Type: path
# Default: ""
# 
# 
# This specifies the command that mutt will use to make external address
# queries.  The string should contain a %s, which will be substituted
# with the query string the user types.  See ``query'' for more
# information.
# 
set query_command="lbdbq"
# 
# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
#
# Name: query_format
# Type: string
# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
# 
# 
# This variable describes the format of the `query' menu. The
# following printf-style sequences are understood:
# 
# %a      destination address
# %c      current entry number
# %e      extra information *
# %n      destination name
# %t      ``*'' if current entry is tagged, a space otherwise
# %>X     right justify the rest of the string and pad with "X"
# %|X     pad to the end of the line with "X"
# %*X     soft-fill with character "X" as pad
# 
# 
# For an explanation of `soft-fill', see the ``$index_format'' documentation.
# 
# * = can be optionally printed if nonzero, see the ``$status_format'' documentation.
# 
# 
# set quit=yes
#
# Name: quit
# Type: quadoption
# Default: yes
# 
# 
# This variable controls whether ``quit'' and ``exit'' actually quit
# from mutt.  If it set to yes, they do quit, if it is set to no, they
# have no effect, and if it is set to ask-yes or ask-no, you are
# prompted for confirmation when you try to quit.
# 
# 
# set quote_regexp="^([ \t]*[|>:}#])+"
#
# Name: quote_regexp
# Type: regular expression
# Default: "^([ \t]*[|>:}#])+"
# 
# 
# A regular expression used in the internal-pager to determine quoted
# sections of text in the body of a message.
# 
# Note: In order to use the quotedx patterns in the
# internal pager, you need to set this to a regular expression that
# matches exactly the quote characters at the beginning of quoted
# lines.
# 
# 
# set read_inc=10
#
# Name: read_inc
# Type: number
# Default: 10
# 
# 
# If set to a value greater than 0, Mutt will display which message it
# is currently on when reading a mailbox or when performing search actions
# such as search and limit. The message is printed after
# read_inc messages have been read or searched (e.g., if set to 25, Mutt will
# print a message when it is at message 25, and then again when it gets
# to message 50).  This variable is meant to indicate progress when
# reading or searching large mailboxes which may take some time.
# When set to 0, only a single message will appear before the reading
# the mailbox.
# 
# Also see the ``$write_inc'' variable and the ``Tuning'' section of the
# manual for performance considerations.
# 
# 
# set read_only=no
#
# Name: read_only
# Type: boolean
# Default: no
# 
# 
# If set, all folders are opened in read-only mode.
# 
# 
# set realname=""
#
# Name: realname
# Type: string
# Default: ""
# 
# 
# This variable specifies what "real" or "personal" name should be used
# when sending messages.
# 
# By default, this is the GECOS field from /etc/passwd.  Note that this
# variable will not be used when the user has set a real name
# in the $from variable.
# 
# 
# set recall=ask-yes
#
# Name: recall
# Type: quadoption
# Default: ask-yes
# 
# 
# Controls whether or not Mutt recalls postponed messages
# when composing a new message.  Also see ``$postponed''.
# 
# Setting this variable to ``yes'' is not generally useful, and thus not
# recommended.
# 
set recall=no
# 
# set record="~/sent"
#
# Name: record
# Type: path
# Default: "~/sent"
# 
# 
# This specifies the file into which your outgoing messages should be
# appended.  (This is meant as the primary method for saving a copy of
# your messages, but another way to do this is using the ``my_hdr''
# command to create a Bcc: field with your email address in it.)
# 
# The value of $record is overridden by the ``$force_name'' and
# ``$save_name'' variables, and the ``fcc-hook'' command.
# 
#set record="=outgoing"
set record="=store"
# 
# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
#
# Name: reply_regexp
# Type: regular expression
# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
# 
# 
# A regular expression used to recognize reply messages when threading
# and replying. The default value corresponds to the English "Re:" and
# the German "Aw:".
# 
set reply_regexp="^((re([[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+"
# 
# set reply_self=no
#
# Name: reply_self
# Type: boolean
# Default: no
# 
# 
# If unset and you are replying to a message sent by you, Mutt will
# assume that you want to reply to the recipients of that message rather
# than to yourself.
# 
# 
# set reply_to=ask-yes
#
# Name: reply_to
# Type: quadoption
# Default: ask-yes
# 
# 
# If set, when replying to a message, Mutt will use the address listed
# in the Reply-to: header as the recipient of the reply.  If unset,
# it will use the address in the From: header field instead.  This
# option is useful for reading a mailing list that sets the Reply-To:
# header field to the list address and you want to send a private
# message to the author of a message.
# 
# 
# set resolve=yes
#
# Name: resolve
# Type: boolean
# Default: yes
# 
# 
# When set, the cursor will be automatically advanced to the next
# (possibly undeleted) message whenever a command that modifies the
# current message is executed.
# 
# 
# set reverse_alias=no
#
# Name: reverse_alias
# Type: boolean
# Default: no
# 
# 
# This variable controls whether or not Mutt will display the "personal"
# name from your aliases in the index menu if it finds an alias that
# matches the message's sender.  For example, if you have the following
# alias:
# 
# alias juser abd30425@somewhere.net (Joe User)
# 
# and then you receive mail which contains the following header:
# 
# From: abd30425@somewhere.net
# 
# It would be displayed in the index menu as ``Joe User'' instead of
# ``abd30425@somewhere.net.''  This is useful when the person's e-mail
# address is not human friendly (like CompuServe addresses).
# 
# 
# set reverse_name=no
#
# Name: reverse_name
# Type: boolean
# Default: no
# 
# 
# It may sometimes arrive that you receive mail to a certain machine,
# move the messages to another machine, and reply to some the messages
# from there.  If this variable is set, the default From: line of
# the reply messages is built using the address where you received the
# messages you are replying to if that address matches your
# alternates.  If the variable is unset, or the address that would be
# used doesn't match your alternates, the From: line will use
# your address on the current machine.
# 
set reverse_name=yes
# 
# set reverse_realname=yes
#
# Name: reverse_realname
# Type: boolean
# Default: yes
# 
# 
# This variable fine-tunes the behaviour of the reverse_name feature.
# When it is set, mutt will use the address from incoming messages as-is,
# possibly including eventual real names.  When it is unset, mutt will
# override any such real names with the setting of the realname variable.
# 
# 
# set rfc2047_parameters=no
#
# Name: rfc2047_parameters
# Type: boolean
# Default: no
# 
# 
# When this variable is set, Mutt will decode RFC-2047-encoded MIME 
# parameters. You want to set this variable when mutt suggests you
# to save attachments to files named like this: 
# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
# 
# When this variable is set interactively, the change doesn't have
# the desired effect before you have changed folders.
# 
# Note that this use of RFC 2047's encoding is explicitly,
# prohibited by the standard, but nevertheless encountered in the
# wild.
# Also note that setting this parameter will not have the effect 
# that mutt generates this kind of encoding.  Instead, mutt will
# unconditionally use the encoding specified in RFC 2231.
# 
set rfc2047_parameters=yes
# 
# set save_address=no
#
# Name: save_address
# Type: boolean
# Default: no
# 
# 
# If set, mutt will take the sender's full address when choosing a
# default folder for saving a mail. If ``$save_name'' or ``$force_name''
# is set too, the selection of the fcc folder will be changed as well.
# 
# 
# set save_empty=yes
#
# Name: save_empty
# Type: boolean
# Default: yes
# 
# 
# When unset, mailboxes which contain no saved messages will be removed
# when closed (the exception is ``$spoolfile'' which is never removed).
# If set, mailboxes are never removed.
# 
# Note: This only applies to mbox and MMDF folders, Mutt does not
# delete MH and Maildir directories.
# 
# 
# set save_history=0
#
# Name: save_history
# Type: number
# Default: 0
# 
# 
# This variable controls the size of the history saved in the
# ``$history_file'' file.
# 
set save_history=100
# 
# set save_name=no
#
# Name: save_name
# Type: boolean
# Default: no
# 
# 
# This variable controls how copies of outgoing messages are saved.
# When set, a check is made to see if a mailbox specified by the
# recipient address exists (this is done by searching for a mailbox in
# the ``$folder'' directory with the username part of the
# recipient address).  If the mailbox exists, the outgoing message will
# be saved to that mailbox, otherwise the message is saved to the
# ``$record'' mailbox.
# 
# Also see the ``$force_name'' variable.
# 
# 
# set score=yes
#
# Name: score
# Type: boolean
# Default: yes
# 
# 
# When this variable is unset, scoring is turned off.  This can
# be useful to selectively disable scoring for certain folders when the
# ``$score_threshold_delete'' variable and friends are used.
# 
# 
# set score_threshold_delete=-1
#
# Name: score_threshold_delete
# Type: number
# Default: -1
# 
# 
# Messages which have been assigned a score equal to or lower than the value
# of this variable are automatically marked for deletion by mutt.  Since
# mutt scores are always greater than or equal to zero, the default setting
# of this variable will never mark a message for deletion.
# 
# 
# set score_threshold_flag=9999
#
# Name: score_threshold_flag
# Type: number
# Default: 9999
# 
# 
# Messages which have been assigned a score greater than or equal to this 
# variable's value are automatically marked "flagged".
# 
# 
# set score_threshold_read=-1
#
# Name: score_threshold_read
# Type: number
# Default: -1
# 
# 
# Messages which have been assigned a score equal to or lower than the value
# of this variable are automatically marked as read by mutt.  Since
# mutt scores are always greater than or equal to zero, the default setting
# of this variable will never mark a message read.
# 
# 
# set send_charset="us-ascii:iso-8859-1:utf-8"
#
# Name: send_charset
# Type: string
# Default: "us-ascii:iso-8859-1:utf-8"
# 
# 
# A colon-delimited list of character sets for outgoing messages. Mutt will use the
# first character set into which the text can be converted exactly.
# If your ``$charset'' is not iso-8859-1 and recipients may not
# understand UTF-8, it is advisable to include in the list an
# appropriate widely used standard character set (such as
# iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
# "iso-8859-1".
# 
# In case the text cannot be converted into one of these exactly,
# mutt uses ``$charset'' as a fallback.
# 
# 
# set sendmail="/usr/sbin/sendmail -oem -oi"
#
# Name: sendmail
# Type: path
# Default: "/usr/sbin/sendmail -oem -oi"
# 
# 
# Specifies the program and arguments used to deliver mail sent by Mutt.
# Mutt expects that the specified program interprets additional
# arguments as recipient addresses.
# 
#set sendmail="/bin/true"
set sendmail="~/.mutt/sendmail"
#set sendmail="/usr/sbin/sendmail -oem -oi"
# 
# set sendmail_wait=0
#
# Name: sendmail_wait
# Type: number
# Default: 0
# 
# 
# Specifies the number of seconds to wait for the ``$sendmail'' process
# to finish before giving up and putting delivery in the background.
# 
# Mutt interprets the value of this variable as follows:
# >0      number of seconds to wait for sendmail to finish before continuing
# 0       wait forever for sendmail to finish
# <0      always put sendmail in the background without waiting
# 
# 
# Note that if you specify a value other than 0, the output of the child
# process will be put in a temporary file.  If there is some error, you
# will be informed as to where to find the output.
# 
# 
# set shell=""
#
# Name: shell
# Type: path
# Default: ""
# 
# 
# Command to use when spawning a subshell.  By default, the user's login
# shell from /etc/passwd is used.
# 
# 
# set sig_dashes=yes
#
# Name: sig_dashes
# Type: boolean
# Default: yes
# 
# 
# If set, a line containing ``-- '' will be inserted before your
# ``$signature''.  It is strongly recommended that you not unset
# this variable unless your ``signature'' contains just your name.  The
# reason for this is because many software packages use ``-- \n'' to
# detect your signature.  For example, Mutt has the ability to highlight
# the signature in a different color in the builtin pager.
# 
set sig_dashes=no
# 
# set sig_on_top=no
#
# Name: sig_on_top
# Type: boolean
# Default: no
# 
# 
# If set, the signature will be included before any quoted or forwarded
# text.  It is strongly recommended that you do not set this variable
# unless you really know what you are doing, and are prepared to take
# some heat from netiquette guardians.
# 
# 
# set signature="~/.signature"
#
# Name: signature
# Type: path
# Default: "~/.signature"
# 
# 
# Specifies the filename of your signature, which is appended to all
# outgoing messages.   If the filename ends with a pipe (``|''), it is
# assumed that filename is a shell command and input should be read from
# its stdout.
# 
#set signature="~/.mutt/getsignature|"
# 
# set simple_search="~f %s | ~s %s"
#
# Name: simple_search
# Type: string
# Default: "~f %s | ~s %s"
# 
# 
# Specifies how Mutt should expand a simple search into a real search
# pattern.  A simple search is one that does not contain any of the ~
# operators.  See ``patterns'' for more information on search patterns.
# 
# For example, if you simply type joe at a search or limit prompt, Mutt
# will automatically expand it to the value specified by this variable.
# For the default value it would be:
# 
# ~f joe | ~s joe
set simple_search="~L %s | ~s %s"
# 
# set smart_wrap=yes
#
# Name: smart_wrap
# Type: boolean
# Default: yes
# 
# 
# Controls the display of lines longer than the screen width in the
# internal pager. If set, long lines are wrapped at a word boundary.  If
# unset, lines are simply wrapped at the screen edge. Also see the
# ``$markers'' variable.
# 
# 
# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
#
# Name: smileys
# Type: regular expression
# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
# 
# 
# The pager uses this variable to catch some common false
# positives of ``$quote_regexp'', most notably smileys in the beginning
# of a line
# 
# 
# set sleep_time=1
#
# Name: sleep_time
# Type: number
# Default: 1
# 
# 
# Specifies time, in seconds, to pause while displaying certain informational
# messages, while moving from folder to folder and after expunging
# messages from the current folder.  The default is to pause one second, so 
# a value of zero for this option suppresses the pause.
# 
# 
# set smtp_authenticators=""
#
# Name: smtp_authenticators
# Type: string
# Default: ""
# 
# 
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an SMTP server, in the order mutt should
# try them.  Authentication methods are any SASL mechanism, eg
# ``digest-md5'', ``gssapi'' or ``cram-md5''.
# This parameter is case-insensitive. If this parameter is unset
# (the default) mutt will try all available methods, in order from
# most-secure to least-secure.
# 
# Example: set smtp_authenticators="digest-md5:cram-md5"
# 
# 
# set smtp_pass=""
#
# Name: smtp_pass
# Type: string
# Default: ""
# 
# 
# Specifies the password for your SMTP account.  If unset, Mutt will
# prompt you for your password when you first send mail via SMTP.
# See ``smtp_url'' to configure mutt to send mail via SMTP.
# Warning: you should only use this option when you are on a
# fairly secure machine, because the superuser can read your muttrc even
# if you are the only one who can read the file.
# 
# 
# set smtp_url=""
#
# Name: smtp_url
# Type: string
# Default: ""
# 
# 
# Defines the SMTP ``smart'' host where sent messages should relayed for
# delivery. This should take the form of an SMTP URL, eg:
# 
# smtp[s]://[user[:pass]@]host[:port]/
# 
# Setting this variable overrides the value of the ``$sendmail''
# variable.
# 
# 
# set sort=date
#
# Name: sort
# Type: sort order
# Default: date
# 
# 
# Specifies how to sort messages in the index menu.  Valid values
# are:
# 
#    date or date-sent
#    date-received
#    from
#    mailbox-order (unsorted)
#    score
#    size
#    spam
#    subject
#    threads
#    to
# 
# You may optionally use the reverse- prefix to specify reverse sorting
# order (example: set sort=reverse-date-sent).
# 
# Note: On Debian systems, this option is set by default to
# ``threads'' in /etc/Muttrc.
# 
# 
# set sort_alias=alias
#
# Name: sort_alias
# Type: sort order
# Default: alias
# 
# 
# Specifies how the entries in the `alias' menu are sorted.  The
# following are legal values:
# 
#    address (sort alphabetically by email address)
#    alias (sort alphabetically by alias name)
#    unsorted (leave in order specified in .muttrc)
# 
# 
# set sort_aux=date
#
# Name: sort_aux
# Type: sort order
# Default: date
# 
# 
# When sorting by threads, this variable controls how threads are sorted
# in relation to other threads, and how the branches of the thread trees
# are sorted.  This can be set to any value that ``$sort'' can, except
# threads (in that case, mutt will just use date-sent).  You can also
# specify the last- prefix in addition to the reverse- prefix, but last-
# must come after reverse-.  The last- prefix causes messages to be
# sorted against its siblings by which has the last descendant, using
# the rest of sort_aux as an ordering.  For instance, set sort_aux=last-
# date-received would mean that if a new message is received in a
# thread, that thread becomes the last one displayed (or the first, if
# you have set sort=reverse-threads.) Note: For reversed ``$sort''
# order $sort_aux is reversed again (which is not the right thing to do,
# but kept to not break any existing configuration setting).
# 
set sort_aux=last-date-received
# 
# set sort_browser=alpha
#
# Name: sort_browser
# Type: sort order
# Default: alpha
# 
# 
# Specifies how to sort entries in the file browser.  By default, the
# entries are sorted alphabetically.  Valid values:
# 
#    alpha (alphabetically)
#    date
#    size
#    unsorted
# 
# You may optionally use the reverse- prefix to specify reverse sorting
# order (example: set sort_browser=reverse-date).
# 
# 
# set sort_re=yes
#
# Name: sort_re
# Type: boolean
# Default: yes
# 
# 
# This variable is only useful when sorting by threads with
# ``$strict_threads'' unset.  In that case, it changes the heuristic
# mutt uses to thread messages by subject.  With sort_re set, mutt will
# only attach a message as the child of another message by subject if
# the subject of the child message starts with a substring matching the
# setting of ``$reply_regexp''.  With sort_re unset, mutt will attach
# the message whether or not this is the case, as long as the
# non-``$reply_regexp'' parts of both messages are identical.
# 
# 
# set spam_separator=","
#
# Name: spam_separator
# Type: string
# Default: ","
# 
# 
# ``spam_separator'' controls what happens when multiple spam headers
# are matched: if unset, each successive header will overwrite any
# previous matches value for the spam label. If set, each successive
# match will append to the previous, using ``spam_separator'' as a
# separator.
# 
# 
# set spoolfile=""
#
# Name: spoolfile
# Type: path
# Default: ""
# 
# 
# If your spool mailbox is in a non-default place where Mutt cannot find
# it, you can specify its location with this variable.  Mutt will
# automatically set this variable to the value of the environment
# variable $MAIL if it is not set.
# 
set spoolfile="=inbox"
# 
# set status_chars="-*%A"
#
# Name: status_chars
# Type: string
# Default: "-*%A"
# 
# 
# Controls the characters used by the "%r" indicator in
# ``$status_format''. The first character is used when the mailbox is
# unchanged. The second is used when the mailbox has been changed, and
# it needs to be resynchronized. The third is used if the mailbox is in
# read-only mode, or if the mailbox will not be written when exiting
# that mailbox (You can toggle whether to write changes to a mailbox
# with the toggle-write operation, bound by default to "%"). The fourth
# is used to indicate that the current folder has been opened in attach-
# message mode (Certain operations like composing a new mail, replying,
# forwarding, etc. are not permitted in this mode).
# 
# 
# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
#
# Name: status_format
# Type: string
# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
# 
# 
# Controls the format of the status line displayed in the index
# menu.  This string is similar to ``$index_format'', but has its own
# set of printf()-like sequences:
# 
# %b      number of mailboxes with new mail *
# %d      number of deleted messages *
# %f      the full pathname of the current mailbox
# %F      number of flagged messages *
# %h      local hostname
# %l      size (in bytes) of the current mailbox *
# %L      size (in bytes) of the messages shown 
#         (i.e., which match the current limit) *
# %m      the number of messages in the mailbox *
# %M      the number of messages shown (i.e., which match the current limit) *
# %n      number of new messages in the mailbox *
# %o      number of old unread messages *
# %p      number of postponed messages *
# %P      percentage of the way through the index
# %r      modified/read-only/won't-write/attach-message indicator,
#         according to $status_chars
# %s      current sorting mode ($sort)
# %S      current aux sorting method ($sort_aux)
# %t      number of tagged messages *
# %u      number of unread messages *
# %v      Mutt version string
# %V      currently active limit pattern, if any *
# %>X     right justify the rest of the string and pad with "X"
# %|X     pad to the end of the line with "X"
# %*X     soft-fill with character "X" as pad
# 
# 
# For an explanation of `soft-fill', see the ``$index_format'' documentation.
# 
# * = can be optionally printed if nonzero
# 
# Some of the above sequences can be used to optionally print a string
# if their value is nonzero.  For example, you may only want to see the
# number of flagged messages if such messages exist, since zero is not
# particularly meaningful.  To optionally print a string based upon one
# of the above sequences, the following construct is used:
# 
# %?<sequence_char>?<optional_string>?
# 
# where sequence_char is a character from the table above, and
# optional_string is the string you would like printed if
# sequence_char is nonzero.  optional_string may contain
# other sequences as well as normal text, but you may not nest
# optional strings.
# 
# Here is an example illustrating how to optionally print the number of
# new messages in a mailbox:
# %?n?%n new messages.?
# 
# You can also switch between two strings using the following construct:
# 
# %?<sequence_char>?<if_string>&<else_string>?
# 
# If the value of sequence_char is non-zero, if_string will
# be expanded, otherwise else_string will be expanded.
# 
# You can force the result of any printf-like sequence to be lowercase
# by prefixing the sequence character with an underscore (_) sign.
# For example, if you want to display the local hostname in lowercase,
# you would use:
# %_h
# 
# If you prefix the sequence character with a colon (:) character, mutt
# will replace any dots in the expansion by underscores. This might be helpful 
# with IMAP folders that don't like dots in folder names.
# 
set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "
# 
# set status_on_top=no
#
# Name: status_on_top
# Type: boolean
# Default: no
# 
# 
# Setting this variable causes the ``status bar'' to be displayed on
# the first line of the screen rather than near the bottom.
# 
# 
# set strict_threads=no
#
# Name: strict_threads
# Type: boolean
# Default: no
# 
# 
# If set, threading will only make use of the ``In-Reply-To'' and
# ``References'' fields when you ``$sort'' by message threads.  By
# default, messages with the same subject are grouped together in
# ``pseudo threads.''. This may not always be desirable, such as in a
# personal mailbox where you might have several unrelated messages with
# the subject ``hi'' which will get grouped together. See also
# ``$sort_re'' for a less drastic way of controlling this
# behaviour.
# 
# 
# set suspend=yes
#
# Name: suspend
# Type: boolean
# Default: yes
# 
# 
# When unset, mutt won't stop when the user presses the terminal's
# susp key, usually ``control-Z''. This is useful if you run mutt
# inside an xterm using a command like xterm -e mutt.
# 
# 
# set text_flowed=no
#
# Name: text_flowed
# Type: boolean
# Default: no
# 
# 
# When set, mutt will generate text/plain; format=flowed attachments.
# This format is easier to handle for some mailing software, and generally
# just looks like ordinary text.  To actually make use of this format's 
# features, you'll need support in your editor.
# 
# Note that $indent_string is ignored when this option is set.
# 
# 
# set thread_received=no
#
# Name: thread_received
# Type: boolean
# Default: no
# 
set thread_received=yes
# 
# When set, mutt uses the date received rather than the date sent
# to thread messages by subject.
# 
# 
# set thorough_search=no
#
# Name: thorough_search
# Type: boolean
# Default: no
# 
# 
# Affects the ~b and ~h search operations described in
# section ``patterns'' above.  If set, the headers and attachments of
# messages to be searched are decoded before searching.  If unset,
# messages are searched as they appear in the folder.
# 
set thorough_search=yes
# 
# set tilde=no
#
# Name: tilde
# Type: boolean
# Default: no
# 
# 
# When set, the internal-pager will pad blank lines to the bottom of the
# screen with a tilde (~).
# 
set tilde=yes
# 
# set time_inc=0
#
# Name: time_inc
# Type: number
# Default: 0
# 
# 
# Along with ``read_inc'', ``write_inc'', and ``net_inc'', this
# variable controls the frequency with which progress updates are
# displayed. It suppresses updates less than ``time_inc'' milliseconds
# apart. This can improve throughput on systems with slow terminals,
# or when running mutt on a remote system.
# 
# 
# set timeout=600
#
# Name: timeout
# Type: number
# Default: 600
# 
# 
# When Mutt is waiting for user input either idleing in menus or
# in an interactive prompt, Mutt would block until input is
# present. Depending on the context, this would prevent certain
# operations from working, like checking for new mail or keeping
# an IMAP connection alive.
# 
# This variable controls how many seconds Mutt will at most wait
# until it aborts waiting for input, performs these operations and
# continues to wait for input.
# 
# A value of zero or less will cause Mutt to never time out.
# 
# 
# set tmpdir=""
#
# Name: tmpdir
# Type: path
# Default: ""
# 
# 
# This variable allows you to specify where Mutt will place its
# temporary files needed for displaying and composing messages.  If
# this variable is not set, the environment variable TMPDIR is
# used.  If TMPDIR is not set then "/tmp" is used.
# 
# 
# set to_chars=" +TCFL"
#
# Name: to_chars
# Type: string
# Default: " +TCFL"
# 
# 
# Controls the character used to indicate mail addressed to you.  The
# first character is the one used when the mail is NOT addressed to your
# address (default: space).  The second is used when you are the only
# recipient of the message (default: +).  The third is when your address
# appears in the TO header field, but you are not the only recipient of
# the message (default: T).  The fourth character is used when your
# address is specified in the CC header field, but you are not the only
# recipient.  The fifth character is used to indicate mail that was sent
# by you.  The sixth character is used to indicate when a mail
# was sent to a mailing-list you subscribe to (default: L).
# 
# 
# set trash=""
#
# Name: trash
# Type: path
# Default: ""
# 
# 
# If set, this variable specifies the path of the trash folder where the
# mails marked for deletion will be moved, instead of being irremediably
# purged.
# 
# NOTE: When you delete a message in the trash folder, it is really
# deleted, so that you have a way to clean the trash.
# 
# 
# set tunnel=""
#
# Name: tunnel
# Type: string
# Default: ""
# 
# 
# Setting this variable will cause mutt to open a pipe to a command
# instead of a raw socket. You may be able to use this to set up
# preauthenticated connections to your IMAP/POP3 server. Example:
# 
# tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
# 
# NOTE: For this example to work you must be able to log in to the remote
# machine without having to enter a password.
# 
# 
# set use_8bitmime=no
#
# Name: use_8bitmime
# Type: boolean
# Default: no
# 
# 
# Warning: do not set this variable unless you are using a version
# of sendmail which supports the -B8BITMIME flag (such as sendmail
# 8.8.x) or you may not be able to send mail.
# 
# When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME
# flag when sending 8-bit messages to enable ESMTP negotiation.
# 
# 
# set use_domain=yes
#
# Name: use_domain
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will qualify all local addresses (ones without the
# @host portion) with the value of ``$hostname''.  If unset, no
# addresses will be qualified.
# 
# 
# set use_envelope_from=no
#
# Name: use_envelope_from
# Type: boolean
# Default: no
# 
# 
# When set, mutt will set the envelope sender of the message.
# If ``$envelope_from_address'' is set, it will be used as the sender
# address. If not, mutt will attempt to derive the sender from the
# "From:" header.
# 
# Note that this information is passed to sendmail command using the
# "-f" command line switch. Therefore setting this option is not useful
# if the ``$sendmail'' variable already contains "-f" or if the
# executable pointed to by $sendmail doesn't support the "-f" switch.
# 
# 
# set use_from=yes
#
# Name: use_from
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will generate the `From:' header field when
# sending messages.  If unset, no `From:' header field will be
# generated unless the user explicitly sets one using the ``my_hdr''
# command.
# 
# 
# set use_idn=yes
#
# Name: use_idn
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will show you international domain names decoded.
# Note: You can use IDNs for addresses even if this is unset.
# This variable only affects decoding.
# 
# 
# set use_ipv6=yes
#
# Name: use_ipv6
# Type: boolean
# Default: yes
# 
# 
# When set, Mutt will look for IPv6 addresses of hosts it tries to
# contact.  If this option is unset, Mutt will restrict itself to IPv4 addresses.
# Normally, the default should work.
# 
# 
# set user_agent=yes
#
# Name: user_agent
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will add a "User-Agent" header to outgoing
# messages, indicating which version of mutt was used for composing
# them.
# 
# 
# set visual=""
#
# Name: visual
# Type: path
# Default: ""
# 
# 
# Specifies the visual editor to invoke when the ~v command is
# given in the builtin editor.
# 
# 
# set wait_key=yes
#
# Name: wait_key
# Type: boolean
# Default: yes
# 
# 
# Controls whether Mutt will ask you to press a key after shell-
# escape, pipe-message, pipe-entry, print-message,
# and print-entry commands.
# 
# It is also used when viewing attachments with ``auto_view'', provided
# that the corresponding mailcap entry has a needsterminal flag,
# and the external program is interactive.
# 
# When set, Mutt will always ask for a key. When unset, Mutt will wait
# for a key only if the external command returned a non-zero status.
# 
set wait_key=no
# 
# set weed=yes
#
# Name: weed
# Type: boolean
# Default: yes
# 
# 
# When set, mutt will weed headers when displaying, forwarding,
# printing, or replying to messages.
# 
# 
# set wrap=0
#
# Name: wrap
# Type: number
# Default: 0
# 
# 
# When set to a positive value, mutt will wrap text at $wrap characters.
# When set to a negative value, mutt will wrap text so that there are $wrap
# characters of empty space on the right side of the terminal.
# 
set wrap=-10
# 
# set wrap_search=yes
#
# Name: wrap_search
# Type: boolean
# Default: yes
# 
# 
# Controls whether searches wrap around the end of the mailbox.
# 
# When set, searches will wrap around the first (or last) message. When
# unset, searches will not wrap.
# 
# 
# set wrapmargin=0
#
# Name: wrapmargin
# Type: number
# Default: 0
# 
# 
# (DEPRECATED) Equivalent to setting wrap with a negative value.
# 
# 
# set write_inc=10
#
# Name: write_inc
# Type: number
# Default: 10
# 
# 
# When writing a mailbox, a message will be printed every
# write_inc messages to indicate progress.  If set to 0, only a
# single message will be displayed before writing a mailbox.
# 
# Also see the ``$read_inc'' variable.
# 
# 
# set write_bcc=yes
#
# Name: write_bcc
# Type: boolean
# Default: yes
# 
# 
# Controls whether mutt writes out the Bcc header when preparing
# messages to be sent.  Exim users may wish to unset this. If mutt
# is set to deliver directly via SMTP (see ``$smtp_url''), this
# option does nothing: mutt will never write out the BCC header
# in this case.
# 
# Note: On Debian systems, exim4 and postfix strip BCC headers by
# default. The above warning applies to exim3 users, see /etc/Muttrc.
# 
# 
# set xterm_icon="M%?n?AIL&ail?"
#
# Name: xterm_icon
# Type: string
# Default: "M%?n?AIL&ail?"
# 
# 
# Controls the format of the icon title, as long as xterm_set_titles
# is enabled. This string is identical in formatting to the one used by
# ``$status_format''.
# 
# 
# set xterm_set_titles=no
#
# Name: xterm_set_titles
# Type: boolean
# Default: no
# 
# 
# Controls whether mutt sets the xterm title bar and icon name
# (as long as you are in an appropriate terminal).
# 
set xterm_set_titles=yes
# 
# set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
#
# Name: xterm_title
# Type: string
# Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
# 
# 
# Controls the format of the title bar of the xterm provided that
# xterm_set_titles has been set. This string is identical in formatting
# to the one used by ``$status_format''.
# 
set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?"
# 

auto_view text/html
#auto_view application/x-gunzip application/x-tar-gz application/x-tar application/x-gtar
#auto_view application/postscript
alternative_order text/enriched text/plain text application/postscript image/*
mime_lookup application/octet-stream

source $my_confdir/colours
source $my_confdir/headers
source $my_confdir/alternates
source $my_confdir/keybindings
source $my_confdir/lists
source $my_confdir/spam
source $my_confdir/hooks

set my_mailboxes = `ls ~/.var/offlineimap/mailboxes 2>/dev/null || echo /dev/null`
source $my_mailboxes

set alias_file="$my_confdir/aliases"
source "test -f $alias_file && cat $alias_file 2>/dev/null || echo unset alias_file|"