import new confvars

[etc/neomutt.git] / .config / neomutt / confvars

# Auto-generated using mkconf from manual.txt
# on 2024-09-19 21:42:43
#
# Invoked as: ./mkconf
#

# 3.1. abort_backspace
# 
# Type: boolean
# Default: yes
# 
# If set, hitting backspace against an empty prompt aborts the prompt.
# 


# 3.2. abort_key
# 
# Type: string
# Default: “007”
# 
# Specifies the key that can be used to abort prompts. The format is the same as
# used in "bind" commands. The default is equivalent to "Ctrl-G". Note that the
# specified key should not be used in other bindings, as the abort operation has
# higher precedence and the binding will not have the desired effect.
# 
# Example: 
# 
# set abort_key = "<Esc>"
# 
# Please note that when using <Esc> as the abort key, you may also want to set
# the environment variable ESCDELAY to a low value or even 0 which will reduce
# the time that ncurses waits to distinguish singular <Esc> key presses from the
# start of a terminal escape sequence. The default time is 1000 milliseconds and
# thus quite noticeable.
# 


# 3.3. abort_noattach
# 
# Type: quadoption
# Default: no
# 
# If set to yes, when composing messages containing the regular expression
# specified by $abort_noattach_regex and no attachments are given, composition
# will be aborted. If set to no, composing messages as such will never be
# aborted. 
# 
# Example: 
# 
# set abort_noattach_regex = "\<attach(|ed|ments?)\>"
# 
set abort_noattach=ask-yes


# 3.4. abort_noattach_regex
# 
# Type: regular expression
# Default: “<(attach|attached|attachments?)>”
# 
# Specifies a regular expression to match against the body of the message, to
# determine if an attachment was mentioned but mistakenly forgotten. If it
# matches, $abort_noattach will be consulted to determine if message sending will
# be aborted.
# 
# Like other regular expressions in NeoMutt, the search is case sensitive if the
# pattern contains at least one upper case letter, and case insensitive
# otherwise. 
# 


# 3.5. abort_nosubject
# 
# Type: quadoption
# Default: ask-yes
# 
# If set to yes, when composing messages and no subject is given at the subject
# prompt, composition will be aborted. If set to no, composing messages with no
# subject given at the subject prompt will never be aborted.
# 


# 3.6. abort_unmodified
# 
# Type: quadoption
# Default: yes
# 
# If set to yes, composition will automatically abort after editing the message
# body if no changes are made to the file (this check only happens after the
# first edit of the file). When set to no, composition will never be aborted.
# 


# 3.7. account_command
# 
# Type: command
# Default: (empty)
# 
# If set, this command is used to retrieve account credentials. The command is
# invoked passing a number of --key value arguments with the specifics of the
# account to lookup. The command writes to standard output a number of key: value
# lines. Currently supported arguments are --hostname, --username, and --type,
# where type can be any of imap, imaps, pop, pops, smtp, smtps, nntp, and nntps.
# Currently supported output lines are login, username, and password.
# 


# 3.8. alias_file
# 
# Type: path
# Default: “~/.neomuttrc”
# 
# The default file in which to save aliases created by the <create-alias>
# function. Entries added to this file are encoded in the character set specified
# by $config_charset if it is set or the current character set otherwise.
# 
# Note: NeoMutt will not automatically source this file; you must explicitly use
# the "source" command for it to be executed in case this option points to a
# dedicated alias file.
# 
# The default for this option is the currently used neomuttrc file, or "~
# /.neomuttrc" if no user neomuttrc was found.
# 
set alias_file="$my_confdir/aliases"


# 3.9. alias_format
# 
# Type: string
# Default: “%3n %f%t %-15a %-56r | %c”
# 
# Specifies the format of the data displayed for the "alias" menu. The following
# printf(3)-style sequences are available:
# 
# ┌───┬───────────────────────────────────────────────────────────────┐ 
# │%a │Alias name                                                     │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%c │Comment                                                        │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%f │Flags - currently, a "d" for an alias marked for deletion      │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%n │Index number                                                   │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%r │Address which alias expands to                                 │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%t │Character which indicates if the alias is tagged for inclusion │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%Y │Comma-separated tags                                           │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"│
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                            │
# └───┴───────────────────────────────────────────────────────────────┘ 
# 


# 3.10. allow_8bit
# 
# Type: boolean
# Default: yes
# 
# Controls whether 8-bit data is converted to 7-bit using either Quoted-
# Printable or Base64 encoding when sending mail.
# 


# 3.11. allow_ansi
# 
# Type: boolean
# Default: no
# 
# Controls whether ANSI color codes in messages (and color tags in rich text
# messages) are to be interpreted. Messages containing these codes are rare, but
# if this option is set, their text will be colored accordingly. Note that this
# may override your color choices, and even present a security problem, since a
# message could include a line like
# 
# [-- PGP output follows ...
# 
# and give it the same color as your attachment color (see also $crypt_timestamp
# ). 
# 


# 3.12. arrow_cursor
# 
# Type: boolean
# Default: no
# 
# When set, an arrow ("->") will be used to indicate the current entry in menus
# instead of highlighting the whole line. On slow network or modem links this
# will make response faster because there is less that has to be redrawn on the
# screen when moving to the next or previous entries in the menu.
# 


# 3.13. arrow_string
# 
# Type: string
# Default: “->”
# 
# Specifies the string of arrow_cursor when arrow_cursor enabled.
# 


# 3.14. ascii_chars
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will use plain ASCII characters when displaying thread and
# attachment trees, instead of the default ACS characters.
# 


# 3.15. ask_bcc
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will prompt you for blind-carbon-copy (Bcc) recipients before
# editing an outgoing message.
# 


# 3.16. ask_cc
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will prompt you for carbon-copy (Cc) recipients before editing
# the body of an outgoing message.
# 


# 3.17. ask_followup_to
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will prompt you for follow-up groups before editing the body of
# an outgoing message.
# 


# 3.18. ask_x_comment_to
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will prompt you for x-comment-to field before editing the body
# of an outgoing message.
# 


# 3.19. assumed_charset
# 
# Type: string list
# Default: (empty)
# 
# This variable is a colon-separated list of character encoding schemes for
# messages without character encoding indication. Header field values and message
# body content without character encoding indication would be assumed that they
# are written in one of this list. By default, all the header fields and message
# body without any charset indication are assumed to be in "us-ascii".
# 
# For example, Japanese users might prefer this:
# 
# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
# 
# However, only the first content is valid for the message body.
# 


# 3.20. attach_charset
# 
# Type: string list
# Default: (empty)
# 
# This variable is a colon-separated list of character encoding schemes for text
# file attachments. NeoMutt uses this setting to guess which encoding files being
# attached are encoded in to convert them to a proper character set given in
# $send_charset. 
# 
# If unset, the value of $charset will be used instead. For example, the
# following configuration would work for Japanese text handling:
# 
# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
# 
# Note: for Japanese users, "iso-2022-*" must be put at the head of the value as
# shown above if included.
# 


# 3.21. attach_format
# 
# Type: string
# Default: “%u%D%I %t%4n %T%d %> [%.7m/%.10M, %.6e%<C?, %C>, %s] ”
# 
# This variable describes the format of the "attachment" menu. The following
# printf(3)-style sequences are understood:
# 
# ┌───┬─────────────────────────────────────────────────────────────────────────┐ 
# │%C │Charset                                                                  │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%c │Requires charset conversion ("n" or "c")                                 │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%D │Deleted flag                                                             │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%d │Description (if none, falls back to %F)                                  │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%e │MIME content-transfer-encoding                                           │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%f │Filename                                                                 │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%F │Filename in content-disposition header (if none, falls back to %f)       │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%I │Disposition ("I" for inline, "A" for attachment)                         │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%m │Major MIME type                                                          │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%M │MIME subtype                                                             │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%n │Attachment number                                                        │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%Q │"Q", if MIME part qualifies for attachment counting                      │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%s │Size (see formatstrings-size)                                            │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%T │Graphic tree characters                                                  │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%t │Tagged flag                                                              │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%u │Unlink (=to delete) flag                                                 │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%X │Number of qualifying MIME parts in this part and its children (please see│
# │ │the "attachments" section for possible speed effects)                    │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%>X│Right justify the rest of the string and pad with character "X"          │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%|X│Pad to the end of the line with character "X"                            │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%*X│Soft-fill with character "X" as pad                                      │
# └───┴─────────────────────────────────────────────────────────────────────────┘ 
# 
# For an explanation of "soft-fill", see the $index_format documentation.
# 


# 3.22. attach_save_dir
# 
# Type: path
# Default: “./”
# 
# The directory where attachments are saved.
# 
set attach_save_dir=$tmpdir


# 3.23. attach_save_without_prompting
# 
# Type: boolean
# Default: no
# 
# This variable, when set to true, will cause attachments to be saved to the
# 'attach_save_dir' location without prompting the user for the filename.
# 


# 3.24. attach_sep
# 
# Type: string
# Default: “n”
# 
# The separator to add between attachments when operating (saving, printing,
# piping, etc) on a list of tagged attachments.
# 


# 3.25. attach_split
# 
# Type: boolean
# Default: yes
# 
# If this variable is unset, when operating (saving, printing, piping, etc) on a
# list of tagged attachments, NeoMutt will concatenate the attachments and will
# operate on them as a single attachment. The $attach_sep separator is added
# after each attachment. When set, NeoMutt will operate on the attachments one by
# one. 
# 


# 3.26. attribution_intro
# 
# Type: string
# Default: “On %d, %n wrote:”
# 
# This is the string that will precede a replied-to message which is quoted in
# the main body of the reply (this is the case when $include is set).
# 
# For a full listing of defined printf(3)-like sequences see the section on
# $index_format. See also $attribution_locale.
# 


# 3.27. attribution_locale
# 
# Type: string
# Default: (empty)
# 
# The locale used by strftime(3) to format dates in the attribution strings.
# Legal values are the strings your system accepts for the locale environment
# variable $LC_TIME.
# 
# This variable is to allow the attribution date format to be customized by
# recipient or folder using hooks. By default, NeoMutt will use your locale
# environment, so there is no need to set this except to override that default.
# 
# Affected variables are: $attribution_intro, $attribution_trailer,
# $forward_attribution_intro, $forward_attribution_trailer, $indent_string.
# 


# 3.28. attribution_trailer
# 
# Type: string
# Default: (empty)
# 
# Similar to the $attribution_intro variable, this is the string that will come
# after a replied-to message which is quoted in the main body of the reply (this
# is the case when $include is set).
# 
# For a full listing of defined printf(3)-like sequences see the section on
# $index_format. See also $attribution_locale.
# 


# 3.29. auto_edit
# 
# Type: boolean
# Default: no
# 
# When set along with $edit_headers, NeoMutt will skip the initial send-menu
# (prompting for subject and recipients) and allow you to immediately begin
# editing the body of your message. The send-menu may still be accessed once you
# have finished editing the body of your message.
# 
# Note: when this option is set, you can't use send-hooks that depend on the
# recipients when composing a new (non-reply) message, as the initial list of
# recipients is empty.
# 
# Also see $fast_reply.
# 
set auto_edit=yes


# 3.30. auto_subscribe
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt assumes the presence of a List-Post header means the
# recipient is subscribed to the list. Unless the mailing list is in the
# "unsubscribe" or "unlist" lists, it will be added to the "subscribe" list.
# Parsing and checking these things slows header reading down, so this option is
# disabled by default.
# 


# 3.31. auto_tag
# 
# Type: boolean
# Default: no
# 
# When set, functions in the index menu which affect a message will be applied to
# all tagged messages (if there are any). When unset, you must first use the
# <tag-prefix> function (bound to ";" by default) to make the next function apply
# to all tagged messages.
# 


# 3.32. autocrypt
# 
# Type: boolean
# Default: no
# 
# When set, enables autocrypt, which provides passive encryption protection with
# keys exchanged via headers. See "autocryptdoc" for more details. (Autocrypt
# only) 
# 


# 3.33. autocrypt_acct_format
# 
# Type: string
# Default: “%4n %-30a %20p %10s”
# 
# This variable describes the format of the "autocrypt account" menu. The
# following printf(3)-style sequences are understood
# 
# ┌───┬───────────────────────────────────────────────────────────────┐ 
# │%a │email address                                                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%k │gpg keyid                                                      │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%n │current entry number                                           │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%p │prefer-encrypt flag                                            │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%s │status flag (active/inactive)                                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"│
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                            │
# └───┴───────────────────────────────────────────────────────────────┘ 
# 
# (Autocrypt only)
# 


# 3.34. autocrypt_dir
# 
# Type: path
# Default: “~/.mutt/autocrypt”
# 
# This variable sets where autocrypt files are stored, including the GPG keyring
# and SQLite database. See "autocryptdoc" for more details. (Autocrypt only)
# 


# 3.35. autocrypt_reply
# 
# Type: boolean
# Default: yes
# 
# When set, replying to an autocrypt email automatically enables autocrypt in the
# reply. You may want to unset this if you're using the same key for autocrypt as
# normal web-of-trust, so that autocrypt isn't forced on for all encrypted
# replies. (Autocrypt only)
# 


# 3.36. beep
# 
# Type: boolean
# Default: yes
# 
# When this variable is set, NeoMutt will beep when an error occurs.
# 
set beep=no


# 3.37. beep_new
# 
# Type: boolean
# Default: no
# 
# When this variable is set, NeoMutt will beep whenever it prints a message
# notifying you of new mail. This is independent of the setting of the $beep
# variable. 
# 


# 3.38. bounce
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether you will be asked to confirm bouncing messages. If set to yes
# you don't get asked if you want to bounce a message. Setting this variable to
# no is not generally useful, and thus not recommended, because you are unable to
# bounce messages.
# 


# 3.39. bounce_delivered
# 
# Type: boolean
# Default: yes
# 
# When this variable is set, NeoMutt will include Delivered-To headers when
# bouncing messages. Postfix users may wish to unset this variable.
# 
# Note: On Debian systems, this option is unset by default in /etc/neomuttrc.
# 
set bounce_delivered=no


# 3.40. braille_friendly
# 
# Type: boolean
# Default: no
# 
# When this variable is set, NeoMutt will place the cursor at the beginning of
# the current line in menus, even when the $arrow_cursor variable is unset,
# making it easier for blind persons using Braille displays to follow these
# menus. The option is unset by default because many visual terminals don't
# permit making the cursor invisible.
# 


# 3.41. browser_abbreviate_mailboxes
# 
# Type: boolean
# Default: yes
# 
# When this variable is set, NeoMutt will abbreviate mailbox names in the browser
# mailbox list, using '~' and '=' shortcuts.
# 
# The default "alpha" setting of $sort_browser uses locale-based sorting (using
# strcoll(3)), which ignores some punctuation. This can lead to some situations
# where the order doesn't make intuitive sense. In those cases, it may be
# desirable to unset this variable.
# 


# 3.42. browser_sort_dirs_first
# 
# Type: boolean
# Default: no
# 
# If this variable is set, the browser will group directories before files.
# 


# 3.43. catchup_newsgroup
# 
# Type: quadoption
# Default: ask-yes
# 
# If this variable is set, NeoMutt will mark all articles in newsgroup as read
# when you quit the newsgroup (catchup newsgroup).
# 


# 3.44. certificate_file
# 
# Type: path
# Default: “~/.mutt_certificates”
# 
# This variable specifies the file where the certificates you trust are saved.
# When an unknown certificate is encountered, you are asked if you accept it or
# not. If you accept it, the certificate can also be saved in this file and
# further connections are automatically accepted.
# 
# You can also manually add CA certificates in this file. Any server certificate
# that is signed with one of these CA certificates is also automatically
# accepted. 
# 
# Example: 
# 
# set certificate_file=~/.neomutt/certificates
# 
# (OpenSSL and GnuTLS only)
# 


# 3.45. change_folder_next
# 
# Type: boolean
# Default: no
# 
# When this variable is set, the <change-folder> function mailbox suggestion will
# start at the next folder in your "mailboxes" list, instead of starting at the
# first folder in the list.
# 


# 3.46. charset
# 
# Type: string
# Default: (empty)
# 
# Character set your terminal uses to display and enter textual data. It is also
# the fallback for $send_charset.
# 
# Upon startup NeoMutt tries to derive this value from environment variables such
# as $LC_CTYPE or $LANG.
# 
# Note: It should only be set in case NeoMutt isn't able to determine the
# character set used correctly.
# 


# 3.47. check_mbox_size
# 
# Type: boolean
# Default: no
# 
# When this variable is set, NeoMutt will use file size attribute instead of
# access time when checking for new mail in mbox and mmdf folders.
# 
# This variable is unset by default and should only be enabled when new mail
# detection for these folder types is unreliable or doesn't work.
# 
# Note that enabling this variable should happen before any "mailboxes"
# directives occur in configuration files regarding mbox or mmdf folders because
# NeoMutt needs to determine the initial new mail status of such a mailbox by
# performing a fast mailbox scan when it is defined. Afterwards the new mail
# status is tracked by file size changes.
# 


# 3.48. check_new
# 
# Type: boolean
# Default: yes
# 
# Note: this option only affects maildir and MH style mailboxes.
# 
# When set, NeoMutt will check for new mail delivered while the mailbox is open.
# Especially with MH mailboxes, this operation can take quite some time since it
# involves scanning the directory and checking each file to see if it has already
# been looked at. If this variable is unset, no check for new mail is performed
# while the mailbox is open.
# 


# 3.49. collapse_all
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will collapse all threads when entering a folder.
# 


# 3.50. collapse_flagged
# 
# Type: boolean
# Default: yes
# 
# When unset, NeoMutt will not collapse a thread if it contains any flagged
# messages. 
# 


# 3.51. collapse_unread
# 
# Type: boolean
# Default: yes
# 
# When unset, NeoMutt will not collapse a thread if it contains any unread
# messages. 
# 


# 3.52. color_directcolor
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will use and allow 24bit colours (aka truecolor aka
# directcolor). For colours to work properly support from the terminal is
# required as well as a properly set TERM environment variable advertising the
# terminals directcolor capability, e.g. "TERM=xterm-direct".
# 
# NeoMutt tries to detect whether the terminal supports 24bit colours and enables
# this variable if it does. If this fails for some reason, you can force 24bit
# colours by setting this variable manually. You may also try to force a certain
# TERM environment variable by starting NeoMutt from a terminal as follows (this
# results in wrong colours if the terminal does not implement directcolors):
# 
# TERM=xterm-direct neomutt
# 
# Note: This variable must be set before using any `color` commands.
# 


# 3.53. compose_confirm_detach_first
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will prompt for confirmation when trying to use <detach-file>
# on the first entry in the compose menu. This is to help prevent irreversible
# loss of the typed message by accidentally hitting 'D' in the menu.
# 
# Note: NeoMutt only prompts for the first entry. It doesn't keep track of which
# message is the typed message if the entries are reordered, or if the first
# entry was already deleted.
# 


# 3.54. compose_format
# 
# Type: string
# Default: “-- NeoMutt: Compose  [Approx. msg size: %l   Atts: %a]%>-”
# 
# Controls the format of the status line displayed in the "compose" menu. This
# string is similar to $status_format, but has its own set of printf(3)-like
# sequences: 
# 
# ┌───┬─────────────────────────────────────────────────────────────────────────┐ 
# │%a │Total number of attachments                                              │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%h │Local hostname                                                           │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%l │Approximate size (in bytes) of the current message (see                  │
# │ │formatstrings-size)                                                      │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%v │NeoMutt version string                                                   │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"          │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                            │
# ├───┼─────────────────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                                      │
# └───┴─────────────────────────────────────────────────────────────────────────┘ 
# 
# See the text describing the $status_format option for more information on how
# to set $compose_format.
# 


# 3.55. compose_show_user_headers
# 
# Type: boolean
# Default: yes
# 
# When set, Neomutt will display user-defined headers (set via my_hdr or from
# editing with edit-headers).
# 
set compose_show_user_headers=no


# 3.56. config_charset
# 
# Type: string
# Default: (empty)
# 
# When defined, NeoMutt will recode commands in rc files from this encoding to
# the current character set as specified by $charset and aliases written to
# $alias_file from the current character set.
# 
# Please note that if setting $charset it must be done before setting
# $config_charset. 
# 
# Recoding should be avoided as it may render unconvertible characters as
# question marks which can lead to undesired side effects (for example in regular
# expressions). 
# 


# 3.57. confirm_append
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will prompt for confirmation when appending messages to an
# existing mailbox.
# 
set confirm_append=no


# 3.58. confirm_create
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will prompt for confirmation when saving messages to a
# mailbox which does not yet exist before creating it.
# 


# 3.59. content_type
# 
# Type: string
# Default: “text/plain”
# 
# Sets the default Content-Type for the body of newly composed messages.
# 
set content_type="text/plain; markup=markdown"


# 3.60. copy
# 
# Type: quadoption
# Default: yes
# 
# This variable controls whether or not copies of your outgoing messages will be
# saved for later references. Also see $record, $save_name, $force_name and "
# fcc-hook". 
# 
set copy=yes


# 3.61. copy_decode_weed
# 
# Type: boolean
# Default: no
# 
# Controls whether NeoMutt will weed headers when invoking the <decode-copy> or
# <decode-save> functions.
# 


# 3.62. count_alternatives
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will recurse inside multipart/alternatives while performing
# attachment searching and counting(see attachments).
# 
# Traditionally, multipart/alternative parts have simply represented different
# encodings of the main content of the email. Unfortunately, some mail clients
# have started to place email attachments inside one of alternatives. Setting
# this will allow NeoMutt to find and count matching attachments hidden there,
# and include them in the index via %X or through ~X pattern matching.
# 


# 3.63. crypt_auto_encrypt
# 
# Type: boolean
# Default: no
# 
# Setting this variable will cause NeoMutt to always attempt to PGP encrypt
# outgoing messages. This is probably only useful in connection to the "send-hook
# " command. It can be overridden by use of the pgp menu, when encryption is not
# required or signing is requested as well. If $smime_is_default is set, then
# OpenSSL is used instead to create S/MIME messages and settings can be
# overridden by use of the smime menu instead. (Crypto only)
# 


# 3.64. crypt_auto_pgp
# 
# Type: boolean
# Default: yes
# 
# This variable controls whether or not NeoMutt may automatically enable PGP
# encryption/signing for messages. See also $crypt_auto_encrypt,
# $crypt_reply_encrypt, $crypt_auto_sign, $crypt_reply_sign and $smime_is_default
# . 
# 


# 3.65. crypt_auto_sign
# 
# Type: boolean
# Default: no
# 
# Setting this variable will cause NeoMutt to always attempt to cryptographically
# sign outgoing messages. This can be overridden by use of the pgp menu, when
# signing is not required or encryption is requested as well. If
# $smime_is_default is set, then OpenSSL is used instead to create S/MIME
# messages and settings can be overridden by use of the smime menu instead of the
# pgp menu. (Crypto only)
# 


# 3.66. crypt_auto_smime
# 
# Type: boolean
# Default: yes
# 
# This variable controls whether or not NeoMutt may automatically enable S/MIME
# encryption/signing for messages. See also $crypt_auto_encrypt,
# $crypt_reply_encrypt, $crypt_auto_sign, $crypt_reply_sign and $smime_is_default
# . 
# 


# 3.67. crypt_chars
# 
# Type: character string
# Default: “SPsK ”
# 
# Controls the characters used in cryptography flags.
# 
# ┌─────────┬───────┬───────────────────────────────────────────────────────────┐ 
# │Character│Default│Description │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │1 │S      │The mail is signed, and the signature is successfully      │
# │ │       │verified.                                                  │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │2 │P      │The mail is PGP encrypted.                                 │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │3 │s      │The mail is signed.                                        │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │4 │K      │The mail contains a PGP public key.                        │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │5 │<space>│The mail has no crypto info.                               │
# └─────────┴───────┴───────────────────────────────────────────────────────────┘ 
# 


# 3.68. crypt_confirm_hook
# 
# Type: boolean
# Default: yes
# 
# If set, then you will be prompted for confirmation of keys when using the
# crypt-hook command. If unset, no such confirmation prompt will be presented.
# This is generally considered unsafe, especially where typos are concerned.
# 


# 3.69. crypt_opportunistic_encrypt
# 
# Type: boolean
# Default: no
# 
# Setting this variable will cause NeoMutt to automatically enable and disable
# encryption, based on whether all message recipient keys can be located by
# NeoMutt. 
# 
# When this option is enabled, NeoMutt will enable/disable encryption each time
# the TO, CC, and BCC lists are edited. If $edit_headers is set, NeoMutt will
# also do so each time the message is edited.
# 
# While this is set, encryption can't be manually enabled/disabled. The pgp or
# smime menus provide a selection to temporarily disable this option for the
# current message.
# 
# If $crypt_auto_encrypt or $crypt_reply_encrypt enable encryption for a message,
# this option will be disabled for that message. It can be manually re-enabled in
# the pgp or smime menus. (Crypto only)
# 
set crypt_opportunistic_encrypt=no


# 3.70. crypt_opportunistic_encrypt_strong_keys
# 
# Type: boolean
# Default: no
# 
# When set, this modifies the behavior of $crypt_opportunistic_encrypt to only
# search for "strong keys", that is, keys with full validity according to the
# web-of-trust algorithm. A key with marginal or no validity will not enable
# opportunistic encryption.
# 
# For S/MIME, the behavior depends on the backend. Classic S/MIME will filter for
# certificates with the 't'(trusted) flag in the .index file. The GPGME backend
# will use the same filters as with OpenPGP, and depends on GPGME's logic for
# assigning the GPGME_VALIDITY_FULL and GPGME_VALIDITY_ULTIMATE validity flag.
# 


# 3.71. crypt_protected_headers_read
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will display protected headers ("Memory Hole") in the pager,
# When set, NeoMutt will display protected headers in the pager, and will update
# the index and header cache with revised headers.
# 
# Protected headers are stored inside the encrypted or signed part of an an
# email, to prevent disclosure or tampering. For more information see https://
# github.com/autocrypt/protected-headers Currently NeoMutt only supports the
# Subject header.
# 
# Encrypted messages using protected headers often substitute the exposed Subject
# header with a dummy value (see $crypt_protected_headers_subject). NeoMutt will
# update its concept of the correct subject after the message is opened, i.e. via
# the <display-message> function. If you reply to a message before opening it,
# NeoMutt will end up using the dummy Subject header, so be sure to open such a
# message first. (Crypto only)
# 


# 3.72. crypt_protected_headers_save
# 
# Type: boolean
# Default: no
# 
# When $crypt_protected_headers_read is set, and a message with a protected
# Subject is opened, NeoMutt will save the updated Subject into the header cache
# by default. This allows searching/limiting based on the protected Subject
# header if the mailbox is re-opened, without having to re-open the message each
# time. However, for mbox/mh mailbox types, or if header caching is not set up,
# you would need to re-open the message each time the mailbox was reopened before
# you could see or search/limit on the protected subject again.
# 
# When this variable is set, NeoMutt additionally saves the protected Subject
# back in the clear-text message headers. This provides better usability, but
# with the tradeoff of reduced security. The protected Subject header, which may
# have previously been encrypted, is now stored in clear-text in the message
# headers. Copying the message elsewhere, via NeoMutt or external tools, could
# expose this previously encrypted data. Please make sure you understand the
# consequences of this before you enable this variable. (Crypto only)
# 


# 3.73. crypt_protected_headers_subject
# 
# Type: string
# Default: “...”
# 
# When $crypt_protected_headers_write is set, and the message is marked for
# encryption, this will be substituted into the Subject field in the message
# headers. 
# 
# To prevent a subject from being substituted, unset this variable, or set it to
# the empty string. (Crypto only)
# 


# 3.74. crypt_protected_headers_write
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will generate protected headers for signed and encrypted
# emails. 
# 
# Protected headers are stored inside the encrypted or signed part of an an
# email, to prevent disclosure or tampering. For more information see https://
# github.com/autocrypt/protected-headers 
# 
# Currently NeoMutt only supports the Subject header. (Crypto only)
# 


# 3.75. crypt_reply_encrypt
# 
# Type: boolean
# Default: yes
# 
# If set, automatically PGP or OpenSSL encrypt replies to messages which are
# encrypted. (Crypto only)
# 


# 3.76. crypt_reply_sign
# 
# Type: boolean
# Default: no
# 
# If set, automatically PGP or OpenSSL sign replies to messages which are signed.
# 
# Note: this does not work on messages that are encrypted and signed! (Crypto
# only) 
# 


# 3.77. crypt_reply_sign_encrypted
# 
# Type: boolean
# Default: no
# 
# If set, automatically PGP or OpenSSL sign replies to messages which are
# encrypted. This makes sense in combination with $crypt_reply_encrypt, because
# it allows you to sign all messages which are automatically encrypted. This
# works around the problem noted in $crypt_reply_sign, that NeoMutt is not able
# to find out whether an encrypted message is also signed. (Crypto only)
# 


# 3.78. crypt_timestamp
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will include a time stamp in the lines surrounding PGP or S/
# MIME output, so spoofing such lines is more difficult. If you are using colors
# to mark these lines, and rely on these, you may unset this setting. (Crypto
# only) 
# 


# 3.79. crypt_use_gpgme
# 
# Type: boolean
# Default: yes
# 
# This variable controls the use of the GPGME-enabled crypto backends. If it is
# set and NeoMutt was built with GPGME support, the gpgme code for S/MIME and PGP
# will be used instead of the classic code. Note that you need to set this option
# in .neomuttrc; it won't have any effect when used interactively.
# 
# Note that the GPGME backend does not support creating old-style inline
# (traditional) PGP encrypted or signed messages (see $pgp_auto_inline).
# 


# 3.80. crypt_use_pka
# 
# Type: boolean
# Default: no
# 
# Controls whether NeoMutt uses PKA (see http://www.g10code.de/docs/
# pka-intro.de.pdf) during signature verification (only supported by the GPGME
# backend). 
# 
set crypt_use_pka=yes


# 3.81. crypt_verify_sig
# 
# Type: quadoption
# Default: yes
# 
# If "yes", always attempt to verify PGP or S/MIME signatures. If "ask-*", ask
# whether or not to verify the signature. If "no", never attempt to verify
# cryptographic signatures. (Crypto only)
# 


# 3.82. date_format
# 
# Type: string
# Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z”
# 
# Instead of using $date_format it is encouraged to use "%[fmt]" directly in the
# corresponding format strings, where "fmt" is the value of $date_format. This
# allows for a more fine grained control of the different menu needs.
# 
# This variable controls the format of the date printed by the "%d" sequence in
# $index_format. This is passed to the strftime(3) function to process the date,
# see the man page for the proper syntax.
# 
# Unless the first character in the string is a bang ("!"), the month and week
# day names are expanded according to the locale. If the first character in the
# string is a bang, the bang is discarded, and the month and week day names in
# the rest of the string are expanded in the C locale (that is in US English).
# 
# Format strings using this variable are:
# 
# UI: $folder_format, $index_format, $mailbox_folder_format, $message_format
# 
# Composing: $attribution_intro, $forward_attribution_intro,
# $forward_attribution_trailer, $forward_format, $indent_string.
# 
set date_format="%F"


# 3.83. debug_file
# 
# Type: path
# Default: “~/.neomuttdebug”
# 
# Debug logging is controlled by the variables $debug_file and $debug_level.
# $debug_file specifies the root of the filename. NeoMutt will add "0" to the
# end. Each time NeoMutt is run with logging enabled, the log files are rotated.
# A maximum of five log files are kept, numbered 0 (most recent) to 4 (oldest).
# 
# This option can be enabled on the command line, "neomutt -l mylog"
# 
# See also: $debug_level
# 


# 3.84. debug_level
# 
# Type: number
# Default: 0
# 
# Debug logging is controlled by the variables $debug_file and $debug_level.
# 
# The debug level controls how much information is saved to the log file. If you
# have a problem with NeoMutt, then enabling logging may help find the cause.
# Levels 1-3 will usually provide enough information for writing a bug report.
# Levels 4,5 will be extremely verbose.
# 
# Warning: Logging at high levels may save private information to the file.
# 
# This option can be enabled on the command line, "neomutt -d 2"
# 
# See also: $debug_file
# 


# 3.85. default_hook
# 
# Type: string
# Default: “~f %s !~P | (~P ~C %s)”
# 
# This variable controls how some hooks are interpreted if their pattern is a
# plain string or a regex. i.e. they don't contain a pattern, like ~f
# 
# The hooks are: fcc-hook, fcc-save-hook, index-format-hook, message-hook,
# reply-hook, save-hook, send-hook and send2-hook.
# 
# The hooks are expanded when they are declared, so a hook will be interpreted
# according to the value of this variable at the time the hook is declared.
# 
# The default value matches if the message is either from a user matching the
# regular expression given, or if it is from you (if the from address matches "
# alternates") and is to or cc'ed to a user matching the given regular
# expression. 
# 


# 3.86. delete
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether or not messages are really deleted when closing or
# synchronizing a mailbox. If set to yes, messages marked for deleting will
# automatically be purged without prompting. If set to no, messages marked for
# deletion will be kept in the mailbox.
# 
set delete=yes


# 3.87. delete_untag
# 
# Type: boolean
# Default: yes
# 
# If this option is set, NeoMutt will untag messages when marking them for
# deletion. This applies when you either explicitly delete a message, or when you
# save it to another folder.
# 


# 3.88. digest_collapse
# 
# Type: boolean
# Default: yes
# 
# If this option is set, NeoMutt's received-attachments menu will not show the
# subparts of individual messages in a multipart/digest. To see these subparts,
# press "v" on that menu.
# 


# 3.89. display_filter
# 
# Type: command
# Default: (empty)
# 
# When set, specifies a command used to filter messages. When a message is viewed
# it is passed as standard input to $display_filter, and the filtered message is
# read from the standard output.
# 
# When preparing the message, NeoMutt inserts some escape sequences into the
# text. They are of the form: <esc>]9;XXX<bel> where "XXX" is a random 64-bit
# number. 
# 
# If these escape sequences interfere with your filter, they can be removed using
# a tool like ansifilter or sed 's/^x1b]9;[0-9]+x7//'
# 
# If they are removed, then PGP and MIME headers will no longer be coloured. This
# can be fixed by adding this to your config: color body magenta default '^[--
# .* --]$'.
# 


# 3.90. dsn_notify
# 
# Type: string
# Default: (empty)
# 
# This variable sets the request for when notification is returned. The string
# consists of a comma separated list (no spaces!) of one or more of the
# following: never, to never request notification, failure, to request
# notification on transmission failure, delay, to be notified of message delays,
# success, to be notified of successful transmission.
# 
# Example: 
# 
# set dsn_notify="failure,delay"
# 
# Note: when using $sendmail for delivery, you should not enable this unless you
# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
# -compatible interface supporting the -N option for DSN. For SMTP delivery, DSN
# support is auto-detected so that it depends on the server whether DSN will be
# used or not.
# 


# 3.91. dsn_return
# 
# Type: string
# Default: (empty)
# 
# This variable controls how much of your message is returned in DSN messages. It
# may be set to either hdrs to return just the message header, or full to return
# the full message.
# 
# Example: 
# 
# set dsn_return=hdrs
# 
# Note: when using $sendmail for delivery, you should not enable this unless you
# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
# -compatible interface supporting the -R option for DSN. For SMTP delivery, DSN
# support is auto-detected so that it depends on the server whether DSN will be
# used or not.
# 


# 3.92. duplicate_threads
# 
# Type: boolean
# Default: yes
# 
# This variable controls whether NeoMutt, when $sort is set to threads, threads
# messages with the same Message-Id together. If it is set, it will indicate that
# it thinks they are duplicates of each other with an equals sign in the thread
# tree. 
# 


# 3.93. edit_headers
# 
# Type: boolean
# Default: no
# 
# This option allows you to edit the header of your outgoing messages along with
# the body of your message.
# 
# Although the compose menu may have localized header labels, the labels passed
# to your editor will be standard RFC2822 headers, (e.g. To:, Cc:, Subject:).
# Headers added in your editor must also be RFC2822 headers, or one of the pseudo
# headers listed in "edit-header". NeoMutt will not understand localized header
# labels, just as it would not when parsing an actual email.
# 
# Note that changes made to the References: and Date: headers are ignored for
# interoperability reasons.
# 
set edit_headers=yes


# 3.94. editor
# 
# Type: command
# Default: (empty)
# 
# This variable specifies which editor is used by NeoMutt. It defaults to the
# value of the $VISUAL, or $EDITOR, environment variable, or to the string "/usr/
# bin/editor" if neither of those are set.
# 
# The $editor string may contain a %s escape, which will be replaced by the name
# of the file to be edited. If the %s escape does not appear in $editor, a space
# and the name to be edited are appended.
# 
# The resulting string is then executed by running
# 
# sh -c 'string'
# 
# where string is the expansion of $editor described above.
# 
set editor="mailplate --edit --auto --keep-unknown"


# 3.95. empty_subject
# 
# Type: string
# Default: “Re: your mail”
# 
# This variable specifies the subject to be used when replying to an email with
# an empty subject. It defaults to "Re: your mail".
# 


# 3.96. encode_from
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will quoted-printable encode messages when they contain the
# string "From " (note the trailing space) in the beginning of a line. This is
# useful to avoid the tampering certain mail delivery and transport agents tend
# to do with messages (in order to prevent tools from misinterpreting the line as
# a mbox message separator).
# 


# 3.97. entropy_file
# 
# Type: path
# Default: (empty)
# 
# The file which includes random data that is used to initialize SSL library
# functions. (OpenSSL only)
# 


# 3.98. envelope_from_address
# 
# Type: e-mail address
# Default: (empty)
# 
# Manually sets the envelope sender for outgoing messages. This value is ignored
# if $use_envelope_from is unset.
# 


# 3.99. external_search_command
# 
# Type: command
# Default: (empty)
# 
# If set, contains the name of the external program used by "~I" patterns. This
# will usually be a wrapper script around mairix, mu, or similar indexers other
# than notmuch (for which there is optional special support).
# 
# Here is an example how it works. Let's assume $external_search_command is set
# to "mairix_filter", and mairix_filter is a script which runs the old but well
# loved mairix indexer with the arguments given to mairix_filter, in the "raw"
# mode of mairix, producing on the standard output a list of Message-IDs, one per
# line. 
# 
# If possible, it also filters down the results coming from mairix such that only
# messages in the current folder remain. It can do this because it gets a hidden
# first argument which is the path to the folder. (This can be the type of clean
# and simple script called a one-liner.)
# 
# Now if NeoMutt gets a limit or tag command followed by the pattern "~I '-t
# s:bleeping='", mairix_filter runs mairix with the arguments from inside the
# quotes (the quotes are needed because of the space after "-t"), mairix finds
# all messages with "bleeping" in the Subject plus all messages sharing threads
# with these and outputs their file names, and mairix_filter translates the file
# names into Message-IDs. Finally, NeoMutt reads the Message-IDs and targets the
# matching messages with the command given to it.
# 
# You, the user, still have to rewrite the mairix_filter script to match the
# behavior of your indexer, but this should help users of indexers other than
# notmuch to integrate them cleanly with NeoMutt.
# 


# 3.100. fast_reply
# 
# Type: boolean
# Default: no
# 
# When set, the initial prompt for recipients (to, cc, bcc) and subject are
# skipped when the relevant information is already provided. These cases include
# replying to messages and passing the relevant command line arguments. The
# initial prompt for recipients is also skipped when composing a new message to
# the current message sender, while the initial prompt for subject is also
# skipped when forwarding messages.
# 
# Note: this variable has no effect when the $auto_edit variable is set.
# 
# See also: $auto_edit, $edit_headers, $ask_cc, $ask_bcc
# 


# 3.101. fcc_attach
# 
# Type: quadoption
# Default: yes
# 
# This variable controls whether or not attachments on outgoing messages are
# saved along with the main body of your message.
# 
# Note: $fcc_before_send forces the default (set) behavior of this option.
# 


# 3.102. fcc_before_send
# 
# Type: boolean
# Default: no
# 
# When this variable is set, FCCs will occur before sending the message. Before
# sending, the message cannot be manipulated, so it will be stored the exact same
# as sent: $fcc_attach and $fcc_clear will be ignored (using their default
# values). 
# 
# When unset, the default, FCCs will occur after sending. Variables $fcc_attach
# and $fcc_clear will be respected, allowing it to be stored without attachments
# or encryption/signing if desired.
# 


# 3.103. fcc_clear
# 
# Type: boolean
# Default: no
# 
# When this variable is set, FCCs will be stored unencrypted and unsigned, even
# when the actual message is encrypted and/or signed.
# 
# Note: $fcc_before_send forces the default (unset) behavior of this option. (PGP
# only) 
# 
# See also $pgp_self_encrypt, $smime_self_encrypt
# 


# 3.104. flag_chars
# 
# Type: character string
# Default: “*!DdrONon- ”
# 
# Controls the characters used in several flags.
# 
# ┌─────────┬───────┬─────────────────────────────────────────────┐ 
# │Character│Default│Description │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │1 │*      │The mail is tagged.                          │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │2 │!      │The mail is flagged as important.            │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │3 │D      │The mail is marked for deletion.             │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │4 │d      │The mail has attachments marked for deletion.│
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │5 │r      │The mail has been replied to.                │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │6 │O      │The mail is Old (Unread but seen).           │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │7 │N      │The mail is New (Unread but not seen).       │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │8 │o      │The mail thread is Old (Unread but seen).    │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │9 │n      │The mail thread is New (Unread but not seen).│
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │10 │-      │The mail is read - %S expando.               │
# ├─────────┼───────┼─────────────────────────────────────────────┤ 
# │11 │<space>│The mail is read - %Z expando.               │
# └─────────┴───────┴─────────────────────────────────────────────┘ 
# 


# 3.105. flag_safe
# 
# Type: boolean
# Default: no
# 
# If set, flagged messages can't be deleted.
# 


# 3.106. folder
# 
# Type: mailbox
# Default: “~/Mail”
# 
# Specifies the default location of your mailboxes. A "+" or "=" at the beginning
# of a pathname will be expanded to the value of this variable. Note that if you
# change this variable (from the default) value you need to make sure that the
# assignment occurs before you use "+" or "=" for any other variables since
# expansion takes place when handling the "mailboxes" command.
# 
set folder="~/mail"


# 3.107. folder_format
# 
# Type: string
# Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %i”
# 
# This variable allows you to customize the file browser display to your personal
# taste. This string is similar to $index_format, but has its own set of printf
# (3)-like sequences:
# 
# ┌─────┬─┬─────────────────────────────────────────────────────────────────────┐ 
# │%a │ │Alert: 1 if user is notified of new mail                             │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%C │ │Current file number                                                  │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%d │ │Date/time folder was last modified                                   │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │ │ │Date/time folder was last modified using $date_format. It is         │
# │%D │ │encouraged to use "%[fmt]" instead, where "fmt" is the value of      │
# │ │ │$date_format.                                                        │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%f │ │Filename ("/" is appended to directory names, "@" to symbolic links  │
# │ │ │and "*" to executable files)                                         │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%F │ │File permissions                                                     │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%g │ │Group name (or numeric gid, if missing)                              │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%i │ │Description of the folder                                            │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%l │ │Number of hard links                                                 │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%m │*│Number of messages in the mailbox                                    │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%n │*│Number of unread messages in the mailbox                             │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%N │ │"N" if mailbox has new mail, " " (space) otherwise                   │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%p │ │Poll: 1 if Mailbox is checked for new mail                           │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%s │ │Size in bytes (see formatstrings-size)                               │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%t │ │"*" if the file is tagged, blank otherwise                           │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%u │ │Owner name (or numeric uid, if missing)                              │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │% │ │Date/time folder was last modified using an strftime(3) expression   │
# │[fmt]│ │                                                                     │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%>X │ │Right justify the rest of the string and pad with character "X"      │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%|X │ │Pad to the end of the line with character "X"                        │
# ├─────┼─┼─────────────────────────────────────────────────────────────────────┤ 
# │%*X │ │Soft-fill with character "X" as pad                                  │
# └─────┴─┴─────────────────────────────────────────────────────────────────────┘ 
# 
# For an explanation of "soft-fill", see the $index_format documentation.
# 
# * = can be optionally printed if nonzero
# 
# %m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats
# to be set. %n requires $mail_check_stats to be set (except for IMAP mailboxes).
# 
set folder_format='%t%N%2C  %D  %4s  %f'


# 3.108. followup_to
# 
# Type: boolean
# Default: yes
# 
# Controls whether or not the "Mail-Followup-To:" header field is generated when
# sending mail. When set, NeoMutt will generate this field when you are replying
# to a known mailing list, specified with the "subscribe" or "lists" commands.
# 
# This field has two purposes. First, preventing you from receiving duplicate
# copies of replies to messages which you send to mailing lists, and second,
# ensuring that you do get a reply separately for any messages sent to known
# lists to which you are not subscribed.
# 
# The header will contain only the list's address for subscribed lists, and both
# the list address and your own email address for unsubscribed lists. Without
# this header, a group reply to your message sent to a subscribed list will be
# sent to both the list and your address, resulting in two copies of the same
# email for you.
# 


# 3.109. followup_to_poster
# 
# Type: quadoption
# Default: ask-yes
# 
# If this variable is set and the keyword "poster" is present in Followup-To
# header, follow-up to newsgroup function is not permitted. The message will be
# mailed to the submitter of the message via mail.
# 


# 3.110. force_name
# 
# Type: boolean
# Default: no
# 
# This variable is similar to $save_name, except that NeoMutt will store a copy
# of your outgoing message by the username of the address you are sending to even
# if that mailbox does not exist.
# 
# Also see the $record variable.
# 


# 3.111. forward_attachments
# 
# Type: quadoption
# Default: ask-yes
# 
# When forwarding inline (i.e. $mime_forward unset or answered with "no" and
# $forward_decode set), attachments which cannot be decoded in a reasonable
# manner will be attached to the newly composed message if this quadoption is set
# or answered with "yes".
# 


# 3.112. forward_attribution_intro
# 
# Type: string
# Default: “----- Forwarded message from %f -----”
# 
# This is the string that will precede a message which has been forwarded in the
# main body of a message (when $mime_forward is unset). For a full listing of
# defined printf(3)-like sequences see the section on $index_format. See also
# $attribution_locale. 
# 


# 3.113. forward_attribution_trailer
# 
# Type: string
# Default: “----- End forwarded message -----”
# 
# This is the string that will follow a message which has been forwarded in the
# main body of a message (when $mime_forward is unset). For a full listing of
# defined printf(3)-like sequences see the section on $index_format. See also
# $attribution_locale. 
# 


# 3.114. forward_decode
# 
# Type: boolean
# Default: yes
# 
# Controls the decoding of complex MIME messages into text/plain when forwarding
# a message. The message header is also RFC2047 decoded. This variable is only
# used, if $mime_forward is unset, otherwise $mime_forward_decode is used
# instead. 
# 


# 3.115. forward_decrypt
# 
# Type: boolean
# Default: yes
# 
# Controls the handling of encrypted messages when forwarding a message. When set
# , the outer layer of encryption is stripped off. This variable is only used if
# $mime_forward is set and $mime_forward_decode is unset.
# 


# 3.116. forward_edit
# 
# Type: quadoption
# Default: yes
# 
# This quadoption controls whether or not the user is automatically placed in the
# editor when forwarding messages. For those who always want to forward with no
# modification, use a setting of "no".
# 


# 3.117. forward_format
# 
# Type: string
# Default: “[%a: %s]”
# 
# This variable controls the default subject when forwarding a message. It uses
# the same format sequences as the $index_format variable.
# 
set forward_format="(fwd) %s"


# 3.118. forward_quote
# 
# Type: boolean
# Default: no
# 
# When set, forwarded messages included in the main body of the message (when
# $mime_forward is unset) will be quoted using $indent_string.
# 


# 3.119. forward_references
# 
# Type: boolean
# Default: no
# 
# When set, forwarded messages set the "In-Reply-To:" and "References:" headers
# in the same way as normal replies would. Hence the forwarded message becomes
# part of the original thread instead of starting a new one.
# 


# 3.120. from
# 
# Type: e-mail address
# Default: (empty)
# 
# When set, this variable contains a default "from" address. It can be overridden
# using "my_hdr" (including from a "send-hook") and $reverse_name. This variable
# is ignored if $use_from is unset.
# 
# If not specified, then it may be read from the environment variable $EMAIL.
# 
set from='martin f krafft <madduck@madduck.net>'


# 3.121. from_chars
# 
# Type: character string
# Default: (empty)
# 
# Controls the character used to prefix the %F and %L fields in the index.
# 
# ┌─────────┬───────────────────────────────────────────────────────────────────┐ 
# │Character│Description │
# ├─────────┼───────────────────────────────────────────────────────────────────┤ 
# │1 │Mail is written by you and has a To address, or has a known mailing│
# │ │list in the To address.                                            │
# ├─────────┼───────────────────────────────────────────────────────────────────┤ 
# │2 │Mail is written by you and has a Cc address, or has a known mailing│
# │ │list in the Cc address.                                            │
# ├─────────┼───────────────────────────────────────────────────────────────────┤ 
# │3 │Mail is written by you and has a Bcc address.                      │
# ├─────────┼───────────────────────────────────────────────────────────────────┤ 
# │4 │All remaining cases.                                               │
# └─────────┴───────────────────────────────────────────────────────────────────┘ 
# 
# If this is empty or unset (default), the traditional long "To ", "Cc " and "Bcc
# " prefixes are used. If set but too short to include a character for a
# particular case, a single space will be prepended to the field. To prevent any
# prefix at all from being added in a particular case, use the special value CR
# (aka ^M) for the corresponding character.
# 
# This slightly odd interface is necessitated by NeoMutt's handling of string
# variables; one can't tell a variable that is unset from one that is set to the
# empty string.
# 


# 3.122. gecos_mask
# 
# Type: regular expression
# Default: “^[^,]*”
# 
# A regular expression used by NeoMutt to parse the GECOS field of a password
# entry when expanding the alias. The default value will return the string up to
# the first "," encountered. If the GECOS field contains a string like "lastname,
# firstname" then you should set it to ".*".
# 
# This can be useful if you see the following behavior: you address an e-mail to
# user ID "stevef" whose full name is "Steve Franklin". If NeoMutt expands
# "stevef" to '"Franklin" stevef@foo.bar' then you should set the $gecos_mask to
# a regular expression that will match the whole name so NeoMutt will expand
# "Franklin" to "Franklin, Steve".
# 


# 3.123. greeting
# 
# Type: string
# Default: (empty)
# 
# When set, this is the string that will precede every message as a greeting
# phrase to the recipients.
# 
# "Format strings" are similar to the strings used in the "C" function printf to
# format output (see the man page for more detail). The following sequences are
# defined in NeoMutt:
# 
# ┌──┬──────────────────────────────┐ 
# │%n│Recipient's real name         │
# ├──┼──────────────────────────────┤ 
# │%u│User (login) name of recipient│
# ├──┼──────────────────────────────┤ 
# │%v│First name of recipient       │
# └──┴──────────────────────────────┘ 
# 


# 3.124. group_index_format
# 
# Type: string
# Default: “%4C %M%N %5s  %-45.45f %d”
# 
# This variable allows you to customize the newsgroup browser display to your
# personal taste. This string is similar to "index_format", but has its own set
# of printf()-like sequences:
# 
# ┌───┬──────────────────────────────────────────────────────────────────┐ 
# │%a │Alert: 1 if user is notified of new mail                          │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%C │Current newsgroup number                                          │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%d │Description of newsgroup (becomes from server)                    │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%f │Newsgroup name                                                    │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%M │- if newsgroup not allowed for direct post (moderated for example)│
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%N │N if newsgroup is new, u if unsubscribed, blank otherwise         │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%n │Number of new articles in newsgroup                               │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%p │Poll: 1 if Mailbox is checked for new mail                        │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%s │Number of unread articles in newsgroup                            │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%>X│Right justify the rest of the string and pad with character "X"   │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%|X│Pad to the end of the line with character "X"                     │
# ├───┼──────────────────────────────────────────────────────────────────┤ 
# │%*X│Soft-fill with character "X" as pad                               │
# └───┴──────────────────────────────────────────────────────────────────┘ 
# 


# 3.125. hdrs
# 
# Type: boolean
# Default: yes
# 
# When unset, the header fields normally added by the "my_hdr" command are not
# created. This variable must be unset before composing a new message or replying
# in order to take effect. If set, the user defined header fields are added to
# every new message.
# 


# 3.126. header
# 
# Type: boolean
# Default: no
# 
# When set, this variable causes NeoMutt to include the header of the message you
# are replying to into the edit buffer. The $weed setting applies.
# 


# 3.127. header_cache
# 
# Type: path
# Default: (empty)
# 
# This variable points to the header cache database. If the path points to an
# existing directory, NeoMutt will create a dedicated header cache database per
# folder. Otherwise, the path points to a regular file, which will be created as
# needed and used as a shared global header cache for all folders. By default it
# is unset so no header caching will be used.
# 
# Header caching can greatly improve speed when opening POP, IMAP MH or Maildir
# folders, see "caching" in the NeoMutt Guide for details.
# 
set header_cache="~/.var/neomutt/header_cache"


# 3.128. header_cache_backend
# 
# Type: string
# Default: (empty)
# 
# This variable specifies the header cache backend. If no backend is specified,
# the first available backend will be used in the following order: tokyocabinet,
# kyotocabinet, qdbm, rocksdb, gdbm, bdb, tdb, lmdb.
# 


# 3.129. header_cache_compress_level
# 
# Type: number
# Default: 1
# 
# When NeoMutt is compiled with lz4, zstd or zlib, this option can be used to
# setup the compression level.
# 


# 3.130. header_cache_compress_method
# 
# Type: string
# Default: (empty)
# 
# When NeoMutt is compiled with lz4, zstd or zlib, the header cache backend can
# use these compression methods for compressing the cache files. This results in
# much smaller cache file sizes and may even improve speed.
# 


# 3.131. header_color_partial
# 
# Type: boolean
# Default: no
# 
# When set, color header regexes behave like color body regexes: color is applied
# to the exact text matched by the regex. When unset, color is applied to the
# entire header.
# 
# One use of this option might be to apply color to just the header labels.
# 
# See "color" for more details.
# 


# 3.132. help
# 
# Type: boolean
# Default: yes
# 
# When set, help lines describing the bindings for the major functions provided
# by each menu are displayed on the first line of the screen.
# 
# Note: The binding will not be displayed correctly if the function is bound to a
# sequence rather than a single keystroke. Also, the help line may not be updated
# if a binding is changed while NeoMutt is running. Since this variable is
# primarily aimed at new users, neither of these should present a major problem.
# 


# 3.133. hidden_host
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will skip the host name part of $hostname variable when
# adding the domain part to addresses.
# 


# 3.134. hidden_tags
# 
# Type: string list
# Default: “unread,draft,flagged,passed,replied,attachment,signed,encrypted”
# 
# This variable specifies a list of comma-separated private notmuch/imap tags
# which should not be printed on screen.
# 


# 3.135. hide_limited
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will not show the presence of messages that are hidden by
# limiting, in the thread tree.
# 


# 3.136. hide_missing
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will not show the presence of missing messages in the thread
# tree. 
# 


# 3.137. hide_thread_subject
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will not show the subject of messages in the thread tree that
# have the same subject as their parent or closest previously displayed sibling.
# 


# 3.138. hide_top_limited
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will not show the presence of messages that are hidden by
# limiting, at the top of threads in the thread tree. Note that when
# $hide_limited is set, this option will have no effect.
# 


# 3.139. hide_top_missing
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will not show the presence of missing messages at the top of
# threads in the thread tree. Note that when $hide_missing is set, this option
# will have no effect.
# 


# 3.140. history
# 
# Type: number
# Default: 10
# 
# This variable controls the size (in number of strings remembered) of the string
# history buffer per category. The buffer is cleared each time the variable is
# set. 
# 
# Note that strings (e.g. commands) starting with a space are never recorded in
# the history. This is for example useful to prevent leaking sensitive
# information into the history file or for one off tests.
# 
# Also note that a string is not added to the history if it exactly matches its
# immediate predecessor, e.g. executing the same command twice in a row results
# in only one copy being added to the history. To prevent duplicates over all
# entries use $history_remove_dups.
# 


# 3.141. history_file
# 
# Type: path
# Default: “~/.mutthistory”
# 
# The file in which NeoMutt will save its history.
# 
# Also see $save_history.
# 
set history_file="~/.var/neomutt/history"


# 3.142. history_format
# 
# Type: string
# Default: “%s”
# 
# Controls the format of the entries of the history list. This string is similar
# to $index_format, but has its own set of printf(3)-like sequences:
# 
# ┌───┬───────────────────────────────────────────────────────────────┐ 
# │%C │Line number                                                    │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%s │History match                                                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"│
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                            │
# └───┴───────────────────────────────────────────────────────────────┘ 
# 


# 3.143. history_remove_dups
# 
# Type: boolean
# Default: no
# 
# When set, all of the string history will be scanned for duplicates when a new
# entry is added. Duplicate entries in the $history_file will also be removed
# when it is periodically compacted.
# 


# 3.144. honor_disposition
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will not display attachments with a disposition of
# "attachment" inline even if it could render the part to plain text. These MIME
# parts can only be viewed from the attachment menu.
# 
# If unset, NeoMutt will render all MIME parts it can properly transform to plain
# text. 
# 


# 3.145. honor_followup_to
# 
# Type: quadoption
# Default: yes
# 
# This variable controls whether or not a Mail-Followup-To header is honored when
# group-replying to a message.
# 


# 3.146. hostname
# 
# Type: string
# Default: (empty)
# 
# Specifies the fully-qualified hostname of the system NeoMutt is running on
# containing the host's name and the DNS domain it belongs to. It is used as the
# domain part (after "@") for local email addresses.
# 
# If not specified in a config file, then NeoMutt will try to determine the
# hostname itself.
# 
# Optionally, NeoMutt can be compiled with a fixed domain name.
# 
# Also see $use_domain and $hidden_host.
# 
# Note: On Debian systems, the default for this variable is obtained from /etc/
# mailname when NeoMutt starts.
# 


# 3.147. idn_decode
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will show you international domain names decoded. Note: You
# can use IDNs for addresses even if this is unset. This variable only affects
# decoding. (IDN only)
# 


# 3.148. idn_encode
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will encode international domain names using IDN. Unset this
# if your SMTP server can handle newer (RFC6531) UTF-8 encoded domains. (IDN
# only) 
# 


# 3.149. ignore_list_reply_to
# 
# Type: boolean
# Default: no
# 
# Affects the behavior of the <reply> function when replying to messages from
# mailing lists (as defined by the "subscribe" or "lists" commands). When set, if
# the "Reply-To:" field is set to the same value as the "To:" field, NeoMutt
# assumes that the "Reply-To:" field was set by the mailing list to automate
# responses to the list, and will ignore this field. To direct a response to the
# mailing list when this option is set, use the <list-reply> function;
# <group-reply> will reply to both the sender and the list.
# 
set ignore_list_reply_to=yes


# 3.150. imap_authenticators
# 
# Type: string list
# Default: (empty)
# 
# This is a colon-separated list of authentication methods NeoMutt may attempt to
# use to log in to an IMAP server, in the order NeoMutt should try them.
# Authentication methods are either "login" or the right side of an IMAP "AUTH=
# xxx" capability string, e.g. "digest-md5", "gssapi" or "cram-md5". This option
# is case-insensitive. If it's unset (the default) NeoMutt will try all available
# methods, in order from most-secure to least-secure.
# 
# Example: 
# 
# set imap_authenticators="gssapi:cram-md5:login"
# 
# Note: NeoMutt will only fall back to other authentication methods if the
# previous methods are unavailable. If a method is available but authentication
# fails, NeoMutt will not connect to the IMAP server.
# 


# 3.151. imap_check_subscribed
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will fetch the set of subscribed folders from your server
# whenever a mailbox is selected, and add them to the set of mailboxes it polls
# for new mail just as if you had issued individual "mailboxes" commands.
# 


# 3.152. imap_condstore
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will use the CONDSTORE extension (RFC7162) if advertised by
# the server. NeoMutt's current implementation is basic, used only for initial
# message fetching and flag updates.
# 
# For some IMAP servers, enabling this will slightly speed up downloading initial
# messages. Unfortunately, Gmail is not one those, and displays worse performance
# when enabled. Your mileage may vary.
# 


# 3.153. imap_deflate
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will use the COMPRESS=DEFLATE extension (RFC4978) if
# advertised by the server.
# 
# In general a good compression efficiency can be achieved, which speeds up
# reading large mailboxes also on fairly good connections.
# 


# 3.154. imap_delim_chars
# 
# Type: string
# Default: “/.”
# 
# This contains the list of characters that NeoMutt will use as folder separators
# for IMAP paths, when no separator is provided on the IMAP connection.
# 


# 3.155. imap_fetch_chunk_size
# 
# Type: number (long)
# Default: 0
# 
# When set to a value greater than 0, new headers will be downloaded in groups of
# this many headers per request. If you have a very large mailbox, this might
# prevent a timeout and disconnect when opening the mailbox, by sending a FETCH
# per set of this many headers, instead of a single FETCH for all new headers.
# 


# 3.156. imap_headers
# 
# Type: string
# Default: (empty)
# 
# NeoMutt requests these header fields in addition to the default headers
# ("Date:", "From:", "Sender:", "Subject:", "To:", "Cc:", "Message-Id:",
# "References:", "Content-Type:", "Content-Description:", "In-Reply-To:",
# "Reply-To:", "Lines:", "List-Post:", "X-Label:") from IMAP servers before
# displaying the index menu. You may want to add more headers for spam detection.
# 
# Note: This is a space separated list, items should be uppercase and not contain
# the colon, e.g. "X-BOGOSITY X-SPAM-STATUS" for the "X-Bogosity:" and
# "X-Spam-Status:" header fields.
# 


# 3.157. imap_idle
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will attempt to use the IMAP IDLE extension to check for new
# mail in the current mailbox. Some servers (dovecot was the inspiration for this
# option) react badly to NeoMutt's implementation. If your connection seems to
# freeze up periodically, try unsetting this.
# 


# 3.158. imap_keep_alive
# 
# Type: number
# Default: 300
# 
# This variable specifies the maximum amount of time in seconds that NeoMutt will
# wait before polling open IMAP connections, to prevent the server from closing
# them before NeoMutt has finished with them. The default is well within the
# RFC-specified minimum amount of time (30 minutes) before a server is allowed to
# do this, but in practice the RFC does get violated every now and then. Reduce
# this number if you find yourself getting disconnected from your IMAP server due
# to inactivity.
# 


# 3.159. imap_list_subscribed
# 
# Type: boolean
# Default: no
# 
# This variable configures whether IMAP folder browsing will look for only
# subscribed folders or all folders. This can be toggled in the IMAP browser with
# the <toggle-subscribed> function.
# 


# 3.160. imap_login
# 
# Type: string
# Default: (empty)
# 
# Your login name on the IMAP server.
# 
# This variable defaults to the value of $imap_user.
# 


# 3.161. imap_oauth_refresh_command
# 
# Type: command
# Default: (empty)
# 
# The command to run to generate an OAUTH refresh token for authorizing your
# connection to your IMAP server. This command will be run on every connection
# attempt that uses the OAUTHBEARER or XOAUTH2 authentication mechanisms. See "
# oauth" for details.
# 


# 3.162. imap_pass
# 
# Type: string
# Default: (empty)
# 
# Specifies the password for your IMAP account. If unset, NeoMutt will prompt you
# for your password when you invoke the <imap-fetch-mail> function or try to open
# an IMAP folder.
# 
# Warning: you should only use this option when you are on a fairly secure
# machine, because the superuser can read your neomuttrc even if you are the only
# one who can read the file.
# 


# 3.163. imap_passive
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will not open new IMAP connections to check for new mail.
# NeoMutt will only check for new mail over existing IMAP connections. This is
# useful if you don't want to be prompted for user/password pairs on NeoMutt
# invocation, or if opening the connection is slow.
# 


# 3.164. imap_peek
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will avoid implicitly marking your mail as read whenever you
# fetch a message from the server. This is generally a good thing, but can make
# closing an IMAP folder somewhat slower. This option exists to appease speed
# freaks. 
# 


# 3.165. imap_pipeline_depth
# 
# Type: number
# Default: 15
# 
# Controls the number of IMAP commands that may be queued up before they are sent
# to the server. A deeper pipeline reduces the amount of time NeoMutt must wait
# for the server, and can make IMAP servers feel much more responsive. But not
# all servers correctly handle pipelined commands, so if you have problems you
# might want to try setting this variable to 0.
# 
# Note: Changes to this variable have no effect on open connections.
# 


# 3.166. imap_poll_timeout
# 
# Type: number
# Default: 15
# 
# This variable specifies the maximum amount of time in seconds that NeoMutt will
# wait for a response when polling IMAP connections for new mail, before timing
# out and closing the connection. Set to 0 to disable timing out.
# 


# 3.167. imap_qresync
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will use the QRESYNC extension (RFC7162) if advertised by the
# server. NeoMutt's current implementation is basic, used only for initial
# message fetching and flag updates.
# 
# Note: this feature is currently experimental. If you experience strange
# behavior, such as duplicate or missing messages please file a bug report to let
# us know.
# 


# 3.168. imap_rfc5161
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will use the IMAP ENABLE extension (RFC5161) to select
# CAPABILITIES. Some servers (notably Coremail System IMap Server) do not
# properly respond to ENABLE commands, which might cause NeoMutt to hang. If your
# connection seems to freeze at login, try unsetting this. See also https://
# github.com/neomutt/neomutt/issues/1689 
# 


# 3.169. imap_send_id
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will send an IMAP ID command (RFC2971) to the server when
# logging in if advertised by the server. This command provides information about
# the IMAP client, such as "NeoMutt" and the current version.
# 


# 3.170. imap_server_noise
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will display warning messages from the IMAP server as error
# messages. Since these messages are often harmless, or generated due to
# configuration problems on the server which are out of the users' hands, you may
# wish to suppress them at some point.
# 


# 3.171. imap_user
# 
# Type: string
# Default: (empty)
# 
# The name of the user whose mail you intend to access on the IMAP server.
# 
# This variable defaults to your user name on the local machine.
# 


# 3.172. implicit_auto_view
# 
# Type: boolean
# Default: no
# 
# If set to "yes", NeoMutt will look for a mailcap entry with the "copiousoutput"
# flag set for every MIME attachment it doesn't have an internal viewer defined
# for. If such an entry is found, NeoMutt will use the viewer defined in that
# entry to convert the body part to text form.
# 


# 3.173. include
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether or not a copy of the message(s) you are replying to is
# included in your reply.
# 
set include=yes


# 3.174. include_encrypted
# 
# Type: boolean
# Default: no
# 
# Controls whether or not NeoMutt includes separately encrypted attachment
# contents when replying.
# 
# This variable was added to prevent accidental exposure of encrypted contents
# when replying to an attacker. If a previously encrypted message were attached
# by the attacker, they could trick an unwary recipient into decrypting and
# including the message in their reply.
# 


# 3.175. include_only_first
# 
# Type: boolean
# Default: no
# 
# Controls whether or not NeoMutt includes only the first attachment of the
# message you are replying.
# 


# 3.176. indent_string
# 
# Type: string
# Default: “> ”
# 
# Specifies the string to prepend to each line of text quoted in a message to
# which you are replying. You are strongly encouraged not to change this value,
# as it tends to agitate the more fanatical netizens.
# 
# The value of this option is ignored if $text_flowed is set, because the quoting
# mechanism is strictly defined for format=flowed.
# 
# This option is a format string, please see the description of $index_format for
# supported printf(3)-style sequences.
# 


# 3.177. index_format
# 
# Type: string
# Default: “%4C %Z %{%b %d} %-15.15L (%<l?%4l&%4c>) %s”
# 
# This variable allows you to customize the message index display to your
# personal taste.
# 
# "Format strings" are similar to the strings used in the C function printf(3) to
# format output (see the man page for more details). For an explanation of the %
# <...> construct, see the status_format description. The following sequences are
# defined in NeoMutt:
# 
# ┌───────┬─────────────────────────────────────────────────────────────────────┐ 
# │%a │Address of the author                                                │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%A │Reply-to address (if present; otherwise: address of author)          │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%b │Filename of the original message folder (think mailbox)              │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%B │Same as %K                                                           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%c │Number of characters (bytes) in the body of the message (see         │
# │ │formatstrings-size)                                                  │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%C │Current message number                                               │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%cr │Number of characters (bytes) in the raw message, including the header│
# │ │(see formatstrings-size)                                             │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │Date and time of message using date_format and sender's timezone It  │
# │%d │is encouraged to use "%{fmt}" instead, where "fmt" is the value of   │
# │ │$date_format.                                                        │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │Date and time of message using date_format and local timezone It is  │
# │%D │encouraged to use "%[fmt]" instead, where "fmt" is the value of      │
# │ │$date_format.                                                        │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%e │Current message number in thread                                     │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%E │Number of messages in current thread                                 │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%f │Sender (address + real name), either From: or Return-Path:           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%F │Author name, or recipient name if the message is from you            │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%Fp │Like %F, but plain. No contextual formatting is applied to recipient │
# │ │name                                                                 │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%g │Message tags (e.g. notmuch tags/imap flags)                          │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%Gx │Individual message tag (e.g. notmuch tags/imap flags)                │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%H │Spam attribute(s) of this message                                    │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%i │Message-id of the current message                                    │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%I │Initials of author                                                   │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%J │Message tags (if present, tree unfolded, and != parent's tags)       │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%K │The list to which the letter was sent (if any; otherwise: empty)     │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%l │number of lines in the unprocessed message (may not work with        │
# │ │maildir, mh, and IMAP folders)                                       │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │If an address in the "To:" or "Cc:" header field matches an address  │
# │%L │Defined by the user's "subscribe" command, this displays "To         │
# │ │<list-name>", otherwise the same as %F                               │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%m │Total number of message in the mailbox                               │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%M │Number of hidden messages if the thread is collapsed                 │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%n │Author's real name (or address if missing)                           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%N │Message score                                                        │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%O │Original save folder where NeoMutt would formerly have Stashed the   │
# │ │message: list name or recipient name If not sent to a list           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%P │Progress indicator for the built-in pager (how much of the file has  │
# │ │been displayed)                                                      │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%q │Newsgroup name (if compiled with NNTP support)                       │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%r │Comma separated list of "To:" recipients                             │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%R │Comma separated list of "Cc:" recipients                             │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%s │Subject of the message                                               │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%S │Single character status of the message ("N"/"O"/"D"/"d"/"!"/"r"/"*") │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%t │"To:" field (recipients)                                             │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%T │The appropriate character from the $to_chars string                  │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%u │User (login) name of the author                                      │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%v │First name of the author, or the recipient if the message is from you│
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%W │Name of organization of author ("Organization:" field)               │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%x │"X-Comment-To:" field (if present and compiled with NNTP support)    │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%X │Number of MIME attachments (please see the "attachments" section for │
# │ │possible speed effects)                                              │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%y │"X-Label:" field, if present                                         │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │"X-Label:" field, if present, and (1) not at part of a thread tree,  │
# │%Y │(2) at the top of a thread, or (3) "X-Label:" is different from      │
# │ │Preceding message's "X-Label:"                                       │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │A three character set of message status flags. The first character is│
# │ │new/read/replied flags ("n"/"o"/"r"/"O"/"N"). The second is deleted  │
# │%Z │or encryption flags ("D"/"d"/"S"/"P"/"s"/"K"). The third is either   │
# │ │tagged/flagged ("*"/"!"), or one of the characters Listed in         │
# │ │$to_chars.                                                           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%zc │Message crypto flags                                                 │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%zs │Message status flags                                                 │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%zt │Message tag flags                                                    │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%@name@│insert and evaluate format-string from the matching "                │
# │ │index-format-hook" command                                           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │the date and time of the message is converted to sender's time zone, │
# │ │and "fmt" is expanded by the library function strftime(3); if the    │
# │%{fmt} │first character inside the braces is a bang ("!"), the date is       │
# │ │formatted ignoring any locale settings. Note that the sender's time  │
# │ │zone might only be available as a numerical offset, so "%Z" behaves  │
# │ │like "%z".                                                           │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │the date and time of the message is converted to the local time zone,│
# │%[fmt] │and "fmt" is expanded by the library function strftime(3); if the    │
# │ │first character inside the brackets is a bang ("!"), the date is     │
# │ │formatted ignoring any locale settings.                              │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │ │the local date and time when the message was received, and "fmt" is  │
# │%(fmt) │expanded by the library function strftime(3); if the first character │
# │ │inside the parentheses is a bang ("!"), the date is formatted        │
# │ │ignoring any locale settings.                                        │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%>X │right justify the rest of the string and pad with character "X"      │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%|X │pad to the end of the line with character "X"                        │
# ├───────┼─────────────────────────────────────────────────────────────────────┤ 
# │%*X │soft-fill with character "X" as pad                                  │
# └───────┴─────────────────────────────────────────────────────────────────────┘ 
# 
# Date format expressions can be constructed based on relative dates. Using the
# date formatting operators along with nested conditionals, the date format can
# be modified based on how old a message is. See the section on "Conditional
# Dates" for an explanation and examples
# 
# Note that for mbox/mmdf, "%l" applies to the unprocessed message, and for
# maildir/mh, the value comes from the "Lines:" header field when present (the
# meaning is normally the same). Thus the value depends on the encodings used in
# the different parts of the message and has little meaning in practice.
# 
# "Soft-fill" deserves some explanation: Normal right-justification will print
# everything to the left of the "%>", displaying padding and whatever lies to the
# right only if there's room. By contrast, soft-fill gives priority to the
# right-hand side, guaranteeing space to display it and showing padding only if
# there's still room. If necessary, soft-fill will eat text leftwards to make
# room for rightward text.
# 
# Note that these expandos are supported in "save-hook", "fcc-hook" and "
# fcc-save-hook", too.
# 


# 3.178. inews
# 
# Type: command
# Default: (empty)
# 
# If set, specifies the program and arguments used to deliver news posted by
# NeoMutt. Otherwise, NeoMutt posts article using current connection to news
# server. The following printf-style sequence is understood:
# 
# ┌──┬──────────────────┐ 
# │%a│account url       │
# ├──┼──────────────────┤ 
# │%p│port │
# ├──┼──────────────────┤ 
# │%P│port if specified │
# ├──┼──────────────────┤ 
# │%s│news server name  │
# ├──┼──────────────────┤ 
# │%S│url schema        │
# ├──┼──────────────────┤ 
# │%u│username │
# └──┴──────────────────┘ 
# 
# Example: 
# 
# set inews="/usr/local/bin/inews -hS"
# 


# 3.179. ispell
# 
# Type: command
# Default: “ispell”
# 
# How to invoke ispell (GNU's spell-checking software).
# 


# 3.180. keep_flagged
# 
# Type: boolean
# Default: no
# 
# If set, read messages marked as flagged will not be moved from your spool
# mailbox to your $mbox mailbox or to the "mbox" specified by a mbox-hook
# command. 
# 
# Note that $keep_flagged only has an effect if $move is set.
# 


# 3.181. local_date_header
# 
# Type: boolean
# Default: yes
# 
# If set, the date in the Date header of emails that you send will be in your
# local timezone. If unset a UTC date will be used instead to avoid leaking
# information about your current location.
# 


# 3.182. mail_check
# 
# Type: number
# Default: 5
# 
# This variable configures how often (in seconds) NeoMutt should look for new
# mail. Also see the $timeout variable.
# 


# 3.183. mail_check_recent
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will only notify you about new mail that has been received
# since the last time you opened the mailbox. When unset, NeoMutt will notify you
# if any new mail exists in the mailbox, regardless of whether you have visited
# it recently.
# 


# 3.184. mail_check_stats
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will periodically calculate message statistics of a mailbox
# while polling for new mail. It will check for unread, flagged, and total
# message counts. (Note: IMAP mailboxes only support unread and total counts).
# 
# Because this operation is more performance intensive, it defaults to unset, and
# has a separate option, $mail_check_stats_interval, to control how often to
# update these counts.
# 
# Message statistics can also be explicitly calculated by invoking the
# <check-stats> function.
# 
set mail_check_stats=yes


# 3.185. mail_check_stats_interval
# 
# Type: number
# Default: 60
# 
# When $mail_check_stats is set, this variable configures how often (in seconds)
# NeoMutt will update message counts.
# 


# 3.186. mailbox_folder_format
# 
# Type: string
# Default: “%2C %<n?%6n&      > %6m %i”
# 
# This variable allows you to customize the file browser display to your personal
# taste. It's only used to customize network mailboxes (e.g. imap). This string
# is identical in formatting to the one used by "$folder_format".
# 


# 3.187. mailcap_path
# 
# Type: string list
# Default: “~/.mailcap:/usr/share/neomutt/mailcap:/etc/mailcap:/etc/mailcap:/usr/
# etc/mailcap:/usr/local/etc/mailcap” 
# 
# This variable specifies a list of colon-separated files to consult when
# attempting to display MIME bodies not directly supported by NeoMutt. The
# default value is generated during startup: see the "mailcap" section of the
# manual. 
# 
# $mailcap_path is overridden by the environment variable $MAILCAPS.
# 
# The default search path is from RFC1524.
# 
set mailcap_path="$my_confdir/mailcap.containers:$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump"


# 3.188. mailcap_sanitize
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will restrict possible characters in mailcap % expandos to a
# well-defined set of safe characters. This is the safe setting, but we are not
# sure it doesn't break some more advanced MIME stuff.
# 
# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
# 


# 3.189. maildir_check_cur
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will poll both the new and cur directories of a maildir folder
# for new messages. This might be useful if other programs interacting with the
# folder (e.g. dovecot) are moving new messages to the cur directory. Note that
# setting this option may slow down polling for new messages in large folders,
# since NeoMutt has to scan all cur messages.
# 


# 3.190. maildir_field_delimiter
# 
# Type: string
# Default: “:”
# 
# Use the value as maildir field delimiter. This is a single-character used to
# accommodate maildir mailboxes on platforms where `:` is not allowed in a
# filename. The recommended alternative on such platforms is `;`. Neomutt
# supports all non-alphanumeric values except for `-`, `.`, ``, `/`. Note: this
# only applies to maildir-style mailboxes. Setting it will have no effect on
# other mailbox types.
# 


# 3.191. maildir_header_cache_verify
# 
# Type: boolean
# Default: yes
# 
# Check for Maildir unaware programs other than NeoMutt having modified maildir
# files when the header cache is in use. This incurs one stat(2) per message
# every time the folder is opened (which can be very slow for NFS folders).
# 
set maildir_header_cache_verify=no


# 3.192. maildir_trash
# 
# Type: boolean
# Default: no
# 
# If set, messages marked as deleted will be saved with the maildir trashed flag
# instead of unlinked. Note: this only applies to maildir-style mailboxes.
# Setting it will have no effect on other mailbox types.
# 


# 3.193. mark_macro_prefix
# 
# Type: string
# Default: “'”
# 
# Prefix for macros created using mark-message. A new macro automatically
# generated with <mark-message>a will be composed from this prefix and the letter
# a. 
# 


# 3.194. mark_old
# 
# Type: boolean
# Default: yes
# 
# Controls whether or not NeoMutt marks new unread messages as old if you exit a
# mailbox without reading them. With this option set, the next time you start
# NeoMutt, the messages will show up with an "O" next to them in the index menu,
# indicating that they are old.
# 
set mark_old=no


# 3.195. markers
# 
# Type: boolean
# Default: yes
# 
# Controls the display of wrapped lines in the internal pager. If set, a "+"
# marker is displayed at the beginning of wrapped lines.
# 
# Also see the $smart_wrap variable.
# 
set markers=no


# 3.196. mask
# 
# Type: regular expression
# Default: “!^.[^.]”
# 
# A regular expression used in the file browser, optionally preceded by the not
# operator "!". Only files whose names match this mask will be shown. The match
# is always case-sensitive.
# 


# 3.197. mbox
# 
# Type: mailbox
# Default: “~/mbox”
# 
# This specifies the folder into which read mail in your $spool_file folder will
# be appended.
# 
# Also see the $move variable.
# 
set mbox="=spool"


# 3.198. mbox_type
# 
# Type: enumeration
# Default: mbox
# 
# The default mailbox type used when creating new folders. May be any of "mbox",
# "MMDF", "MH" or "Maildir".
# 
# This can also be set using the -m command-line option.
# 
set mbox_type=Maildir


# 3.199. me_too
# 
# Type: boolean
# Default: no
# 
# If unset, NeoMutt will remove your address (see the "alternates" command) from
# the list of recipients when replying to a message.
# 


# 3.200. menu_context
# 
# Type: number
# Default: 0
# 
# This variable controls the number of lines of context that are given when
# scrolling through menus. (Similar to $pager_context.)
# 
set menu_context=5


# 3.201. menu_move_off
# 
# Type: boolean
# Default: yes
# 
# When unset, the bottom entry of menus will never scroll up past the bottom of
# the screen, unless there are less entries than lines. When set, the bottom
# entry may move off the bottom.
# 


# 3.202. menu_scroll
# 
# Type: boolean
# Default: no
# 
# When set, menus will be scrolled up or down one line when you attempt to move
# across a screen boundary. If unset, the screen is cleared and the next or
# previous page of the menu is displayed (useful for slow links to avoid many
# redraws). 
# 
set menu_scroll=yes


# 3.203. message_cache_clean
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will clean out obsolete entries from the message cache when the
# mailbox is synchronized. You probably only want to set it every once in a
# while, since it can be a little slow (especially for large folders).
# 


# 3.204. message_cache_dir
# 
# Type: path
# Default: (empty)
# 
# Set this to a directory and NeoMutt will cache copies of messages from your
# IMAP and POP servers here. You are free to remove entries at any time.
# 
# When setting this variable to a directory, NeoMutt needs to fetch every remote
# message only once and can perform regular expression searches as fast as for
# local folders.
# 
# Also see the $message_cache_clean variable.
# 


# 3.205. message_format
# 
# Type: string
# Default: “%s”
# 
# This is the string displayed in the "attachment" menu for attachments of type
# message/rfc822. For a full listing of defined printf(3)-like sequences see the
# section on $index_format.
# 


# 3.206. meta_key
# 
# Type: boolean
# Default: no
# 
# If set, forces NeoMutt to interpret keystrokes with the high bit (bit 8) set as
# if the user had pressed the Esc key and whatever key remains after having the
# high bit removed. For example, if the key pressed has an ASCII value of 0xf8,
# then this is treated as if the user had pressed Esc then "x". This is because
# the result of removing the high bit from 0xf8 is 0x78, which is the ASCII
# character "x".
# 


# 3.207. mh_purge
# 
# Type: boolean
# Default: no
# 
# When unset, NeoMutt will mimic mh's behavior and rename deleted messages to ,
# <old file name> in mh folders instead of really deleting them. This leaves the
# message on disk but makes programs reading the folder ignore it. If the
# variable is set, the message files will simply be deleted.
# 
# This option is similar to $maildir_trash for Maildir folders.
# 


# 3.208. mh_seq_flagged
# 
# Type: string
# Default: “flagged”
# 
# The name of the MH sequence used for flagged messages.
# 


# 3.209. mh_seq_replied
# 
# Type: string
# Default: “replied”
# 
# The name of the MH sequence used to tag replied messages.
# 


# 3.210. mh_seq_unseen
# 
# Type: string
# Default: “unseen”
# 
# The name of the MH sequence used for unseen messages.
# 


# 3.211. mime_forward
# 
# Type: quadoption
# Default: no
# 
# When set, the message you are forwarding will be attached as a separate message
# /rfc822 MIME part instead of included in the main body of the message. This is
# useful for forwarding MIME messages so the receiver can properly view the
# message as it was delivered to you. If you like to switch between MIME and not
# MIME from mail to mail, set this variable to "ask-no" or "ask-yes".
# 
# Also see $forward_decode and $mime_forward_decode.
# 
set mime_forward=ask-yes


# 3.212. mime_forward_decode
# 
# Type: boolean
# Default: no
# 
# Controls the decoding of complex MIME messages into text/plain when forwarding
# a message while $mime_forward is set. Otherwise $forward_decode is used
# instead. 
# 


# 3.213. mime_forward_rest
# 
# Type: quadoption
# Default: yes
# 
# When forwarding multiple attachments of a MIME message from the attachment
# menu, attachments which can't be decoded in a reasonable manner will be
# attached to the newly composed message if this option is set.
# 


# 3.214. mime_type_query_command
# 
# Type: command
# Default: (empty)
# 
# This specifies a command to run, to determine the mime type of a new attachment
# when composing a message. Unless $mime_type_query_first is set, this will only
# be run if the attachment's extension is not found in the mime.types file.
# 
# The string may contain a "%s", which will be substituted with the attachment
# filename. NeoMutt will add quotes around the string substituted for "%s"
# automatically according to shell quoting rules, so you should avoid adding your
# own. If no "%s" is found in the string, NeoMutt will append the attachment
# filename to the end of the string.
# 
# The command should output a single line containing the attachment's mime type.
# 
# Suggested values are "xdg-mime query filetype" or "file -bi".
# 


# 3.215. mime_type_query_first
# 
# Type: boolean
# Default: no
# 
# When set, the $mime_type_query_command will be run before the mime.types
# lookup. 
# 


# 3.216. mix_entry_format
# 
# Type: string
# Default: “%4n %c %-16s %a”
# 
# This variable describes the format of a remailer line on the mixmaster chain
# selection screen. The following printf(3)-like sequences are supported:
# 
# ┌───┬───────────────────────────────────────────────────────────────┐ 
# │%a │The remailer's e-mail address                                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%c │Remailer capabilities                                          │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%n │The running number on the menu                                 │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%s │The remailer's short name                                      │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"│
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                            │
# └───┴───────────────────────────────────────────────────────────────┘ 
# 
# (Mixmaster only)
# 


# 3.217. mixmaster
# 
# Type: command
# Default: “mixmaster”
# 
# This variable contains the path to the Mixmaster binary on your system. It is
# used with various sets of parameters to gather the list of known remailers, and
# to finally send a message through the mixmaster chain. (Mixmaster only)
# 
# Note: On Debian systems, this option is set by default to “mixmaster-filter” in
# /etc/neomuttrc. 
# 
set mixmaster="mixmaster-filter"


# 3.218. move
# 
# Type: quadoption
# Default: no
# 
# If this variable is set, then NeoMutt will move read messages from your spool
# mailbox to your $mbox mailbox or to the "mbox" specified by a mbox-hook
# command. 
# 
# See also $keep_flagged.
# 
set move=no


# 3.219. narrow_tree
# 
# Type: boolean
# Default: no
# 
# This variable, when set, makes the thread tree narrower, allowing deeper
# threads to fit on the screen.
# 
set narrow_tree=yes


# 3.220. net_inc
# 
# Type: number
# Default: 10
# 
# Operations that expect to transfer a large amount of data over the network will
# update their progress every $net_inc kilobytes. If set to 0, no progress
# messages will be displayed.
# 
# See also $read_inc, $write_inc and $net_inc.
# 


# 3.221. new_mail_command
# 
# Type: command
# Default: (empty)
# 
# If set, NeoMutt will call this command after a new message is received. See the
# $status_format documentation for the values that can be formatted into this
# command. 
# 


# 3.222. news_cache_dir
# 
# Type: path
# Default: “~/.neomutt”
# 
# This variable pointing to directory where NeoMutt will save cached news
# articles and headers in. If unset, articles and headers will not be saved at
# all and will be reloaded from the server each time.
# 


# 3.223. news_server
# 
# Type: string
# Default: (empty)
# 
# This variable specifies domain name or address of NNTP server.
# 
# You can also specify username and an alternative port for each news server,
# e.g. [[s]news://][username[:password]@]server[:port]
# 
# This option can also be set using the command line option "-g", the environment
# variable $NNTPSERVER, or putting the server name in the file "/etc/nntpserver".
# 


# 3.224. newsgroups_charset
# 
# Type: string
# Default: “utf-8”
# 
# Character set of newsgroups descriptions.
# 


# 3.225. newsrc
# 
# Type: path
# Default: “~/.newsrc”
# 
# The file, containing info about subscribed newsgroups - names and indexes of
# read articles. The following printf-style sequence is understood:
# 
# ┌───────┬─────────────────┬───────────────────┐ 
# │Expando│Description │Example            │
# ├───────┼─────────────────┼───────────────────┤ 
# │%a │Account url      │news:news.gmane.org│
# ├───────┼─────────────────┼───────────────────┤ 
# │%p │Port             │119                │
# ├───────┼─────────────────┼───────────────────┤ 
# │%P │Port if specified│10119              │
# ├───────┼─────────────────┼───────────────────┤ 
# │%s │News server name │news.gmane.org     │
# ├───────┼─────────────────┼───────────────────┤ 
# │%S │Url schema       │news               │
# ├───────┼─────────────────┼───────────────────┤ 
# │%u │Username         │username           │
# └───────┴─────────────────┴───────────────────┘ 
# 


# 3.226. nm_config_file
# 
# Type: path
# Default: “auto”
# 
# Configuration file for notmuch. Use 'auto' to detect configuration.
# 


# 3.227. nm_config_profile
# 
# Type: string
# Default: (empty)
# 
# Configuration profile for notmuch.
# 


# 3.228. nm_db_limit
# 
# Type: number
# Default: 0
# 
# This variable specifies the default limit used in notmuch queries.
# 


# 3.229. nm_default_url
# 
# Type: string
# Default: (empty)
# 
# This variable specifies the default Notmuch database in format notmuch://
# <absolute path>.
# 


# 3.230. nm_exclude_tags
# 
# Type: string
# Default: (empty)
# 
# The messages tagged with these tags are excluded and not loaded from notmuch DB
# to NeoMutt unless specified explicitly.
# 


# 3.231. nm_flagged_tag
# 
# Type: string
# Default: “flagged”
# 
# This variable specifies notmuch tag which is used for flagged messages. The
# variable is used to count flagged messages in DB and set the flagged flag when
# modifying tags. All other NeoMutt commands use standard (e.g. maildir) flags.
# 


# 3.232. nm_open_timeout
# 
# Type: number
# Default: 5
# 
# This variable specifies the timeout for database open in seconds.
# 


# 3.233. nm_query_type
# 
# Type: string
# Default: “messages”
# 
# This variable specifies the default query type (threads or messages) used in
# notmuch queries.
# 


# 3.234. nm_query_window_current_position
# 
# Type: number
# Default: 0
# 
# This variable contains the position of the current search for window based
# vfolder. 
# 


# 3.235. nm_query_window_current_search
# 
# Type: string
# Default: (empty)
# 
# This variable contains the currently setup notmuch search for window based
# vfolder. 
# 


# 3.236. nm_query_window_duration
# 
# Type: number
# Default: 0
# 
# This variable sets the time duration of a windowed notmuch query. Accepted
# values all non negative integers. A value of 0 disables the feature.
# 


# 3.237. nm_query_window_enable
# 
# Type: boolean
# Default: no
# 
# This variable enables windowed notmuch queries even if window duration is 0.
# 


# 3.238. nm_query_window_or_terms
# 
# Type: string
# Default: (empty)
# 
# This variable contains additional notmuch search terms for messages to be shown
# regardless of date.
# 
# Example: 
# 
# Using "notmuch://?query=tag:inbox" as the mailbox and "tag:flagged and
# tag:unread" as the or terms, NeoMutt will produce a query window such as:
# 
# notmuch://?query=tag:inbox and (date:... or (tag:flagged and tag:unread))
# 


# 3.239. nm_query_window_timebase
# 
# Type: string
# Default: “week”
# 
# This variable sets the time base of a windowed notmuch query. Accepted values
# are 'minute', 'hour', 'day', 'week', 'month', 'year'
# 


# 3.240. nm_record
# 
# Type: boolean
# Default: no
# 
# This variable specifies whether, when writing a just-sent message to the
# $record, the message should also be added to the notmuch DB. Replies inherit
# the notmuch tags from the original message. See $nm_record_tags for how to
# modify the set of notmuch tags assigned to sent messages written to the record.
# 


# 3.241. nm_record_tags
# 
# Type: string
# Default: (empty)
# 
# This variable specifies the notmuch tag modifications (addition, removal,
# toggling) applied to messages added to the Neomutt record when $nm_record is
# true. See the description of the <modify-labels> function for the syntax.
# 


# 3.242. nm_replied_tag
# 
# Type: string
# Default: “replied”
# 
# This variable specifies notmuch tag which is used for replied messages. The
# variable is used to set the replied flag when modifying tags. All other NeoMutt
# commands use standard (e.g. maildir) flags.
# 


# 3.243. nm_unread_tag
# 
# Type: string
# Default: “unread”
# 
# This variable specifies notmuch tag which is used for unread messages. The
# variable is used to count unread messages in DB and set the unread flag when
# modifying tags. All other NeoMutt commands use standard (e.g. maildir) flags.
# 


# 3.244. nntp_authenticators
# 
# Type: string
# Default: (empty)
# 
# This is a colon-delimited list of authentication methods NeoMutt may attempt to
# use to log in to a news server, in the order NeoMutt should try them.
# Authentication methods are either "user" or any SASL mechanism, e.g.
# "digest-md5", "gssapi" or "cram-md5". This option is case-insensitive. If it's
# unset (the default) NeoMutt will try all available methods, in order from
# most-secure to least-secure.
# 
# Example: 
# 
# set nntp_authenticators="digest-md5:user"
# 
# Note: NeoMutt will only fall back to other authentication methods if the
# previous methods are unavailable. If a method is available but authentication
# fails, NeoMutt will not connect to the IMAP server.
# 


# 3.245. nntp_context
# 
# Type: number (long)
# Default: 1000
# 
# This variable defines number of articles which will be in index when newsgroup
# entered. If active newsgroup have more articles than this number, oldest
# articles will be ignored. Also controls how many articles headers will be saved
# in cache when you quit newsgroup.
# 


# 3.246. nntp_listgroup
# 
# Type: boolean
# Default: yes
# 
# This variable controls whether or not existence of each article is checked when
# newsgroup is entered.
# 


# 3.247. nntp_load_description
# 
# Type: boolean
# Default: yes
# 
# This variable controls whether or not descriptions for each newsgroup must be
# loaded when newsgroup is added to list (first time list loading or new
# newsgroup adding).
# 


# 3.248. nntp_pass
# 
# Type: string
# Default: (empty)
# 
# Your password for NNTP account.
# 


# 3.249. nntp_poll
# 
# Type: number
# Default: 60
# 
# The time in seconds until any operations on newsgroup except post new article
# will cause recheck for new news. If set to 0, NeoMutt will recheck newsgroup on
# each operation in index (stepping, read article, etc.).
# 


# 3.250. nntp_user
# 
# Type: string
# Default: (empty)
# 
# Your login name on the NNTP server. If unset and NNTP server requires
# authentication, NeoMutt will prompt you for your account name when you connect
# to news server.
# 


# 3.251. pager
# 
# Type: command
# Default: (empty)
# 
# This variable specifies which pager you would like to use to view messages.
# When empty, NeoMutt will use the built-in pager, otherwise this variable should
# specify the pathname of the external pager you would like to use.
# 
# Using an external pager may have some disadvantages: Additional keystrokes are
# necessary because you can't call NeoMutt functions directly from the pager, and
# screen resizes cause lines longer than the screen width to be badly formatted
# in the help menu.
# 


# 3.252. pager_context
# 
# Type: number
# Default: 0
# 
# This variable controls the number of lines of context that are given when
# displaying the next or previous page in the internal pager. By default, NeoMutt
# will display the line after the last one on the screen at the top of the next
# page (0 lines of context).
# 
# This variable also specifies the amount of context given for search results. If
# positive, this many lines will be given before a match, if 0, the match will be
# top-aligned. 
# 
set pager_context=2


# 3.253. pager_format
# 
# Type: string
# Default: “-%Z- %C/%m: %-20.20n   %s%*  -- (%P)”
# 
# This variable controls the format of the one-line message "status" displayed
# before each message in either the internal or an external pager. The valid
# sequences are listed in the $index_format section.
# 
set pager_format="<%a> %*  %i (%P)"


# 3.254. pager_index_lines
# 
# Type: number
# Default: 0
# 
# Determines the number of lines of a mini-index which is shown when in the
# pager. The current message, unless near the top or bottom of the folder, will
# be roughly one third of the way down this mini-index, giving the reader the
# context of a few messages before and after the message. This is useful, for
# example, to determine how many messages remain to be read in the current
# thread. A value of 0 results in no index being shown.
# 
set pager_index_lines=$menu_context


# 3.255. pager_read_delay
# 
# Type: number
# Default: 0
# 
# Determines the number of seconds that must elapse after first opening a new
# message in the pager before that message will be marked as read. A value of 0
# results in the message being marked read unconditionally; for other values,
# navigating to another message or exiting the pager before the timeout will
# leave the message marked unread. This setting is ignored if $pager is set.
# 


# 3.256. pager_skip_quoted_context
# 
# Type: number
# Default: 0
# 
# Determines the number of lines of context to show before the unquoted text when
# using the <skip-quoted> function. When set to a positive number at most that
# many lines of the previous quote are displayed. If the previous quote is
# shorter the whole quote is displayed.
# 
# The (now deprecated) skip_quoted_offset is an alias for this variable, and
# should no longer be used.
# 


# 3.257. pager_stop
# 
# Type: boolean
# Default: no
# 
# When set, the internal-pager will not move to the next message when you are at
# the end of a message and invoke the <next-page> function.
# 
set pager_stop=yes


# 3.258. pattern_format
# 
# Type: string
# Default: “%2n %-15e  %d”
# 
# This variable describes the format of the "pattern completion" menu. The
# following printf(3)-style sequences are understood:
# 
# ┌───┬───────────────────────────────────────────────────────────────┐ 
# │%d │pattern description                                            │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%e │pattern expression                                             │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%n │index number                                                   │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%>X│right justify the rest of the string and pad with character "X"│
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%|X│pad to the end of the line with character "X"                  │
# ├───┼───────────────────────────────────────────────────────────────┤ 
# │%*X│soft-fill with character "X" as pad                            │
# └───┴───────────────────────────────────────────────────────────────┘ 
# 


# 3.259. pgp_auto_decode
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will automatically attempt to decrypt traditional PGP messages
# whenever the user performs an operation which ordinarily would result in the
# contents of the message being operated on. For example, if the user displays a
# pgp-traditional message which has not been manually checked with the
# <check-traditional-pgp> function, NeoMutt will automatically check the message
# for traditional pgp.
# 


# 3.260. pgp_auto_inline
# 
# Type: boolean
# Default: no
# 
# This option controls whether NeoMutt generates old-style inline (traditional)
# PGP encrypted or signed messages under certain circumstances. This can be
# overridden by use of the pgp menu, when inline is not required. The GPGME
# backend does not support this option.
# 
# Note that NeoMutt might automatically use PGP/MIME for messages which consist
# of more than a single MIME part. NeoMutt can be configured to ask before
# sending PGP/MIME messages when inline (traditional) would not work.
# 
# Also see the $pgp_mime_auto variable.
# 
# Also note that using the old-style PGP message format is strongly deprecated.
# (PGP only)
# 


# 3.261. pgp_check_exit
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will check the exit code of the PGP subprocess when signing or
# encrypting. A non-zero exit code means that the subprocess failed. (PGP only)
# 


# 3.262. pgp_check_gpg_decrypt_status_fd
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will check the status file descriptor output of
# $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes indicating
# successful decryption. This will check for the presence of DECRYPTION_OKAY,
# absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs between the
# BEGIN_DECRYPTION and END_DECRYPTION status codes.
# 
# If unset, NeoMutt will instead match the status fd output against
# $pgp_decryption_okay. (PGP only)
# 


# 3.263. pgp_clear_sign_command
# 
# Type: command
# Default: (empty)
# 
# This format is used to create an old-style "clearsigned" PGP message. Note that
# the use of this format is strongly deprecated.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. Note that in this case, %r expands to the search
# string, which is a list of one or more quoted values such as email address,
# name, or keyid. (PGP only)
# 


# 3.264. pgp_decode_command
# 
# Type: command
# Default: (empty)
# 
# This format strings specifies a command which is used to decode application/pgp
# attachments. 
# 
# The PGP command formats have their own set of printf(3)-like sequences:
# 
# ┌──┬──────────────────────────────────────────────────────────────────────────┐ 
# │%a│The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.│
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%f│Expands to the name of a file containing a message.                       │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%p│Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string   │
# │ │otherwise. Note: This may be used with a %<...> construct.                │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%r│One or more key IDs (or fingerprints if available).                       │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%s│Expands to the name of a file containing the signature part of a multipart│
# │ │/signed attachment when verifying it.                                     │
# └──┴──────────────────────────────────────────────────────────────────────────┘ 
# 
# (PGP only)
# 


# 3.265. pgp_decrypt_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to decrypt a PGP encrypted message.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 
# Note: When decrypting messages using gpg, a pinentry program needs to be
# invoked unless the password is cached within gpg-agent. Currently, the
# pinentry-tty program (usually distributed with gpg) isn't suitable for being
# invoked by NeoMutt. You are encouraged to use a different pinentry-program when
# running NeoMutt in order to avoid problems.
# 
# See also: https://github.com/neomutt/neomutt/issues/1014
# 


# 3.266. pgp_decryption_okay
# 
# Type: regular expression
# Default: (empty)
# 
# If you assign text to this variable, then an encrypted PGP message is only
# considered successfully decrypted if the output from $pgp_decrypt_command
# contains the text. This is used to protect against a spoofed encrypted message,
# with multipart/encrypted headers but containing a block that is not actually
# encrypted. (e.g. simply signed and ascii armored text).
# 
# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored.
# (PGP only)
# 


# 3.267. pgp_default_key
# 
# Type: string
# Default: (empty)
# 
# This is the default key-pair to use for PGP operations. It will be used for
# encryption (see $postpone_encrypt and $pgp_self_encrypt).
# 
# It will also be used for signing unless $pgp_sign_as is set.
# 
# The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and
# should no longer be used. (PGP only)
# 


# 3.268. pgp_encrypt_only_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to encrypt a body part without signing it.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. Note that in this case, %r expands to the search
# string, which is a list of one or more quoted values such as email address,
# name, or keyid. (PGP only)
# 


# 3.269. pgp_encrypt_sign_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to both sign and encrypt a body part.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.270. pgp_entry_format
# 
# Type: string
# Default: “%4n %t%f %4l/0x%k %-4a %2c %u”
# 
# This variable allows you to customize the PGP key selection menu to your
# personal taste. If $crypt_use_gpgme is set, then it applies to S/MIME key
# selection menu also. This string is similar to $index_format, but has its own
# set of printf(3)-like sequences:
# 
# ┌──────┬───────────────────────────────────────────────────────────────┐ 
# │%a │Algorithm                                                      │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%c │Capabilities                                                   │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%f │Flags                                                          │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%i │Key fingerprint (or long key id if non-existent)               │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%k │Key id                                                         │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%l │Key length                                                     │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%n │Number                                                         │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%p │Protocol                                                       │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%t │Trust/validity of the key-uid association                      │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%u │User id                                                        │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%[<s>]│Date of the key where <s> is an strftime(3) expression         │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%>X │Right justify the rest of the string and pad with character "X"│
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%|X │Pad to the end of the line with character "X"                  │
# ├──────┼───────────────────────────────────────────────────────────────┤ 
# │%*X │Soft-fill with character "X" as pad                            │
# └──────┴───────────────────────────────────────────────────────────────┘ 
# 
# See the section "Sending Cryptographically Signed/Encrypted Messages" of the
# user manual for the meaning of the letters some of these sequences expand to.
# 
# (Crypto only) or (PGP only when GPGME disabled)
# 


# 3.271. pgp_export_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to export a public key from the user's key ring.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.272. pgp_get_keys_command
# 
# Type: command
# Default: (empty)
# 
# This command is invoked whenever NeoMutt needs to fetch the public key
# associated with an email address. Of the sequences supported by
# $pgp_decode_command, %r is the only printf(3)-like sequence used with this
# format. Note that in this case, %r expands to the email address, not the public
# key ID (the key ID is unknown, which is why NeoMutt is invoking this command).
# (PGP only)
# 


# 3.273. pgp_good_sign
# 
# Type: regular expression
# Default: (empty)
# 
# If you assign a text to this variable, then a PGP signature is only considered
# verified if the output from $pgp_verify_command contains the text. Use this
# variable if the exit code from the command is 0 even for bad signatures. (PGP
# only) 
# 


# 3.274. pgp_ignore_subkeys
# 
# Type: boolean
# Default: yes
# 
# Setting this variable will cause NeoMutt to ignore OpenPGP subkeys. Instead,
# the principal key will inherit the subkeys' capabilities. Unset this if you
# want to play interesting key selection games. (PGP only)
# 


# 3.275. pgp_import_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to import a key from a message into the user's public key
# ring. 
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.276. pgp_list_pubring_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to list the public key ring's contents. The output format
# must be analogous to the one used by
# 
# gpg --list-keys --with-colons --with-fingerprint
# 
# Note: gpg's fixed-list-mode option should not be used. It produces a different
# date format which may result in NeoMutt showing incorrect key generation dates.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.277. pgp_list_secring_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to list the secret key ring's contents. The output format
# must be analogous to the one used by:
# 
# gpg --list-keys --with-colons --with-fingerprint
# 
# Note: gpg's fixed-list-mode option should not be used. It produces a different
# date format which may result in NeoMutt showing incorrect key generation dates.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.278. pgp_long_ids
# 
# Type: boolean
# Default: yes
# 
# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE:
# Internally, NeoMutt has transitioned to using fingerprints (or long key IDs as
# a fallback). This option now only controls the display of key IDs in the key
# selection menu and a few other places. (PGP only)
# 


# 3.279. pgp_mime_auto
# 
# Type: quadoption
# Default: ask-yes
# 
# This option controls whether NeoMutt will prompt you for automatically sending
# a (signed/encrypted) message using PGP/MIME when inline (traditional) fails
# (for any reason).
# 
# Also note that using the old-style PGP message format is strongly deprecated.
# (PGP only)
# 


# 3.280. pgp_reply_inline
# 
# Type: boolean
# Default: no
# 
# Setting this variable will cause NeoMutt to always attempt to create an inline
# (traditional) message when replying to a message which is PGP encrypted/signed
# inline. This can be overridden by use of the pgp menu, when inline is not
# required. This option does not automatically detect if the (replied-to) message
# is inline; instead it relies on NeoMutt internals for previously checked/
# flagged messages.
# 
# Note that NeoMutt might automatically use PGP/MIME for messages which consist
# of more than a single MIME part. NeoMutt can be configured to ask before
# sending PGP/MIME messages when inline (traditional) would not work.
# 
# Also see the $pgp_mime_auto variable.
# 
# Also note that using the old-style PGP message format is strongly deprecated.
# (PGP only)
# 


# 3.281. pgp_retainable_sigs
# 
# Type: boolean
# Default: no
# 
# If set, signed and encrypted messages will consist of nested multipart/signed
# and multipart/encrypted body parts.
# 
# This is useful for applications like encrypted and signed mailing lists, where
# the outer layer (multipart/encrypted) can be easily removed, while the inner
# multipart/signed part is retained. (PGP only)
# 
set pgp_retainable_sigs=yes


# 3.282. pgp_self_encrypt
# 
# Type: boolean
# Default: yes
# 
# When set, PGP encrypted messages will also be encrypted using the key in
# $pgp_default_key. (PGP only)
# 


# 3.283. pgp_show_unusable
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will display non-usable keys on the PGP key selection menu.
# This includes keys which have been revoked, have expired, or have been marked
# as "disabled" by the user. (PGP only)
# 
set pgp_show_unusable=no


# 3.284. pgp_sign_as
# 
# Type: string
# Default: (empty)
# 
# If you have a different key pair to use for signing, you should set this to the
# signing key. Most people will only need to set $pgp_default_key. It is
# recommended that you use the keyid form to specify your key (e.g. 0x00112233).
# (PGP only)
# 
set pgp_sign_as="0x9C9D6979AE941637"


# 3.285. pgp_sign_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to create the detached PGP signature for a multipart/
# signed PGP/MIME body part.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.286. pgp_sort_keys
# 
# Type: sort order
# Default: address
# 
# Specifies how the entries in the pgp menu are sorted. The following are legal
# values: 
# 
# ┌───────┬──────────────────────────────┐ 
# │address│sort alphabetically by user id│
# ├───────┼──────────────────────────────┤ 
# │keyid │sort alphabetically by key id │
# ├───────┼──────────────────────────────┤ 
# │date │sort by key creation date     │
# ├───────┼──────────────────────────────┤ 
# │trust │sort by the trust of the key  │
# └───────┴──────────────────────────────┘ 
# 
# If you prefer reverse order of the above values, prefix it with "reverse-".
# (PGP only)
# 


# 3.287. pgp_strict_enc
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will automatically encode PGP/MIME signed messages as
# quoted-printable. Please note that unsetting this variable may lead to problems
# with non-verifyable PGP signatures, so only change this if you know what you
# are doing. (PGP only)
# 


# 3.288. pgp_timeout
# 
# Type: number (long)
# Default: 300
# 
# The number of seconds after which a cached passphrase will expire if not used.
# (PGP only)
# 


# 3.289. pgp_use_gpg_agent
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt expects a gpg-agent(1) process will handle private key
# passphrase prompts. If unset, NeoMutt will prompt for the passphrase and pass
# it via stdin to the pgp command.
# 
# Note that as of version 2.1, GnuPG automatically spawns an agent and requires
# the agent be used for passphrase management. Since that version is increasingly
# prevalent, this variable now defaults set.
# 
# NeoMutt works with a GUI or curses pinentry program. A TTY pinentry should not
# be used.
# 
# If you are using an older version of GnuPG without an agent running, or another
# encryption program without an agent, you will need to unset this variable. (PGP
# only) 
# 
set pgp_use_gpg_agent=yes


# 3.290. pgp_verify_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to verify PGP signatures.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.291. pgp_verify_key_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to verify key information from the key selection menu.
# 
# This is a format string, see the $pgp_decode_command command for possible
# printf(3)-like sequences. (PGP only)
# 


# 3.292. pipe_decode
# 
# Type: boolean
# Default: no
# 
# Used in connection with the <pipe-message> function. When unset, NeoMutt will
# pipe the messages without any preprocessing. When set, NeoMutt will attempt to
# decode the messages first.
# 
# Also see $pipe_decode_weed, which controls whether headers will be weeded when
# this is set.
# 


# 3.293. pipe_decode_weed
# 
# Type: boolean
# Default: yes
# 
# For <pipe-message>, when $pipe_decode is set, this further controls whether
# NeoMutt will weed headers.
# 


# 3.294. pipe_sep
# 
# Type: string
# Default: “n”
# 
# The separator to add between messages when piping a list of tagged messages to
# an external Unix command.
# 


# 3.295. pipe_split
# 
# Type: boolean
# Default: no
# 
# Used in connection with the <pipe-message> function following <tag-prefix>. If
# this variable is unset, when piping a list of tagged messages NeoMutt will
# concatenate the messages and will pipe them all concatenated. When set, NeoMutt
# will pipe the messages one by one. In both cases the messages are piped in the
# current sorted order, and the $pipe_sep separator is added after each message.
# 


# 3.296. pop_auth_try_all
# 
# Type: boolean
# Default: yes
# 
# If set, NeoMutt will try all available authentication methods. When unset,
# NeoMutt will only fall back to other authentication methods if the previous
# methods are unavailable. If a method is available but authentication fails,
# NeoMutt will not connect to the POP server.
# 


# 3.297. pop_authenticators
# 
# Type: string list
# Default: (empty)
# 
# This is a colon-separated list of authentication methods NeoMutt may attempt to
# use to log in to an POP server, in the order NeoMutt should try them.
# Authentication methods are either "user", "apop" or any SASL mechanism, e.g.
# "digest-md5", "gssapi" or "cram-md5". This option is case-insensitive. If this
# option is unset (the default) NeoMutt will try all available methods, in order
# from most-secure to least-secure.
# 
# Example: 
# 
# set pop_authenticators="digest-md5:apop:user"
# 


# 3.298. pop_check_interval
# 
# Type: number
# Default: 60
# 
# This variable configures how often (in seconds) NeoMutt should look for new
# mail in the currently selected mailbox if it is a POP mailbox.
# 


# 3.299. pop_delete
# 
# Type: quadoption
# Default: ask-no
# 
# If set, NeoMutt will delete successfully downloaded messages from the POP
# server when using the <fetch-mail> function. When unset, NeoMutt will download
# messages but also leave them on the POP server.
# 


# 3.300. pop_host
# 
# Type: string
# Default: (empty)
# 
# The name of your POP server for the <fetch-mail> function. You can also specify
# an alternative port, username and password, i.e.:
# 
# [pop[s]://][username[:password]@]popserver[:port] 
# 
# where "[...]" denotes an optional part.
# 


# 3.301. pop_last
# 
# Type: boolean
# Default: no
# 
# If this variable is set, NeoMutt will try to use the "LAST" POP command for
# retrieving only unread messages from the POP server when using the <fetch-mail>
# function. 
# 


# 3.302. pop_oauth_refresh_command
# 
# Type: command
# Default: (empty)
# 
# The command to run to generate an OAUTH refresh token for authorizing your
# connection to your POP server. This command will be run on every connection
# attempt that uses the OAUTHBEARER authentication mechanism. See "oauth" for
# details. 
# 


# 3.303. pop_pass
# 
# Type: string
# Default: (empty)
# 
# Specifies the password for your POP account. If unset, NeoMutt will prompt you
# for your password when you open a POP mailbox.
# 
# Warning: you should only use this option when you are on a fairly secure
# machine, because the superuser can read your neomuttrc even if you are the only
# one who can read the file.
# 


# 3.304. pop_reconnect
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether or not NeoMutt will try to reconnect to the POP server if the
# connection is lost.
# 


# 3.305. pop_user
# 
# Type: string
# Default: (empty)
# 
# Your login name on the POP server.
# 
# This variable defaults to your user name on the local machine.
# 


# 3.306. post_moderated
# 
# Type: quadoption
# Default: ask-yes
# 
# If set to yes, NeoMutt will post article to newsgroup that have not permissions
# to posting (e.g. moderated). Note: if news server does not support posting to
# that newsgroup or totally read-only, that posting will not have an effect.
# 


# 3.307. postpone
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether or not messages are saved in the $postponed mailbox when you
# elect not to send immediately. If set to ask-yes or ask-no, you will be
# prompted with "Save (postpone) draft message?" when quitting from the "compose"
# screen. 
# 
# Also see the $recall variable.
# 


# 3.308. postpone_encrypt
# 
# Type: boolean
# Default: no
# 
# When set, postponed messages that are marked for encryption will be
# self-encrypted. NeoMutt will first try to encrypt using the value specified in
# $pgp_default_key or $smime_default_key. If those are not set, it will try the
# deprecated $postpone_encrypt_as. (Crypto only)
# 


# 3.309. postpone_encrypt_as
# 
# Type: string
# Default: (empty)
# 
# This is a deprecated fall-back variable for $postpone_encrypt. Please use
# $pgp_default_key or $smime_default_key. (Crypto only)
# 


# 3.310. postponed
# 
# Type: mailbox
# Default: “~/postponed”
# 
# NeoMutt allows you to indefinitely "postpone sending a message" which you are
# editing. When you choose to postpone a message, NeoMutt saves it in the mailbox
# specified by this variable.
# 
# Also see the $postpone variable.
# 
set postponed="=drafts"


# 3.311. preconnect
# 
# Type: string
# Default: (empty)
# 
# If set, a shell command to be executed if NeoMutt fails to establish a
# connection to the server. This is useful for setting up secure connections,
# e.g. with ssh(1). If the command returns a nonzero status, NeoMutt gives up
# opening the server. Example:
# 
# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 < /dev/null > /dev/null"
# 
# Mailbox "foo" on "mailhost.net" can now be reached as "{localhost:1234}foo".
# 
# Note: For this example to work, you must be able to log in to the remote
# machine without having to enter a password.
# 


# 3.312. preferred_languages
# 
# Type: string list
# Default: (empty)
# 
# This variable specifies a list of comma-separated languages. RFC8255 : user
# preferred languages to be searched in parts and display. Example:
# 
# set preferred_languages="en,fr,de"
# 


# 3.313. print
# 
# Type: quadoption
# Default: ask-no
# 
# Controls whether or not NeoMutt really prints messages. This is set to "ask-no"
# by default, because some people accidentally hit "p" often.
# 


# 3.314. print_command
# 
# Type: command
# Default: “lpr”
# 
# This specifies the command pipe that should be used to print messages.
# 
set print_command="muttprint"


# 3.315. print_decode
# 
# Type: boolean
# Default: yes
# 
# Used in connection with the <print-message> function. If this option is set,
# the message is decoded before it is passed to the external command specified by
# $print_command. If this option is unset, no processing will be applied to the
# message when printing it. The latter setting may be useful if you are using
# some advanced printer filter which is able to properly format e-mail messages
# for printing.
# 
# Also see $print_decode_weed, which controls whether headers will be weeded when
# this is set.
# 


# 3.316. print_decode_weed
# 
# Type: boolean
# Default: yes
# 
# For <print-message>, when $print_decode is set, this further controls whether
# NeoMutt will weed headers.
# 


# 3.317. print_split
# 
# Type: boolean
# Default: no
# 
# Used in connection with the <print-message> function. If this option is set,
# the command specified by $print_command is executed once for each message which
# is to be printed. If this option is unset, the command specified by
# $print_command is executed only once, and all the messages are concatenated,
# with a form feed as the message separator.
# 
# Those who use the enscript(1) program's mail-printing mode will most likely
# want to set this option.
# 
set print_split=yes


# 3.318. prompt_after
# 
# Type: boolean
# Default: yes
# 
# If you use an external $pager, setting this variable will cause NeoMutt to
# prompt you for a command when the pager exits rather than returning to the
# index menu. If unset, NeoMutt will return to the index menu when the external
# pager exits.
# 


# 3.319. query_command
# 
# Type: command
# Default: (empty)
# 
# This specifies the command NeoMutt will use to make external address queries.
# The string may contain a "%s", which will be substituted with the query string
# the user types. NeoMutt will add quotes around the string substituted for "%s"
# automatically according to shell quoting rules, so you should avoid adding your
# own. If no "%s" is found in the string, NeoMutt will append the user's query to
# the end of the string. See "query" (https://neomutt.org/guide/
# advancedusage.html#query) for more information.
# 
set query_command="lbdbq"


# 3.320. query_format
# 
# Type: string
# Default: “%3c %t %-25.25n %-25.25a | %e”
# 
# This variable describes the format of the "query" menu. The following printf(3)
# -style sequences are understood:
# 
# ┌───┬─┬─────────────────────────────────────────────────────┐ 
# │%a │ │Destination address                                  │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%c │ │Current entry number                                 │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%e │*│Extra information                                    │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%n │ │Destination name                                     │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%t │ │"*" if current entry is tagged, a space otherwise    │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%Y │ │Comma-separated tags                                 │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%>X│ │Right justify the rest of the string and pad with "X"│
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%|X│ │Pad to the end of the line with "X"                  │
# ├───┼─┼─────────────────────────────────────────────────────┤ 
# │%*X│ │Soft-fill with character "X" as pad                  │
# └───┴─┴─────────────────────────────────────────────────────┘ 
# 
# For an explanation of "soft-fill", see the $index_format documentation.
# 
# * = can be optionally printed if nonzero, see the $status_format documentation.
# 


# 3.321. quit
# 
# Type: quadoption
# Default: yes
# 
# This variable controls whether "quit" and "exit" actually quit from NeoMutt. If
# this option is set, they do quit, if it is unset, they have no effect, and if
# it is set to ask-yes or ask-no, you are prompted for confirmation when you try
# to quit.
# 
# In order to quit from NeoMutt if this variable is unset, you must send the
# signal SIGINT to NeoMutt. This can usually be achieved by pressing CTRL-C in
# the terminal.
# 


# 3.322. quote_regex
# 
# Type: regular expression
# Default: “^([ t]*[|>:}#])+”
# 
# A regular expression used in the internal pager to determine quoted sections of
# text in the body of a message. Quoted text may be filtered out using the
# <toggle-quoted> command, or colored according to the "color quoted" family of
# directives. 
# 
# Higher levels of quoting may be colored differently ("color quoted1", "color
# quoted2", etc.). The quoting level is determined by removing the last character
# from the matched text and recursively reapplying the regular expression until
# it fails to produce a match.
# 
# Match detection may be overridden by the $smileys regular expression.
# 


# 3.323. read_inc
# 
# Type: number
# Default: 10
# 
# If set to a value greater than 0, NeoMutt will display which message it is
# currently on when reading a mailbox or when performing search actions such as
# search and limit. The message is printed after this many messages have been
# read or searched (e.g., if set to 25, NeoMutt will print a message when it is
# at message 25, and then again when it gets to message 50). This variable is
# meant to indicate progress when reading or searching large mailboxes which may
# take some time. When set to 0, only a single message will appear before the
# reading the mailbox.
# 
# Also see the $write_inc, $net_inc and $time_inc variables and the "tuning"
# section of the manual for performance considerations.
# 


# 3.324. read_only
# 
# Type: boolean
# Default: no
# 
# If set, all folders are opened in read-only mode.
# 


# 3.325. real_name
# 
# Type: string
# Default: (empty)
# 
# This variable specifies what "real" or "personal" name should be used when
# sending messages.
# 
# If not specified, then the user's "real name" will be read from /etc/passwd.
# This option will not be used, if "$from" is set.
# 


# 3.326. recall
# 
# Type: quadoption
# Default: ask-yes
# 
# Controls whether or not NeoMutt recalls postponed messages when composing a new
# message. 
# 
# Setting this variable to yes is not generally useful, and thus not recommended.
# Note that the <recall-message> function can be used to manually recall
# postponed messages.
# 
# Also see $postponed variable.
# 
set recall=no


# 3.327. record
# 
# Type: mailbox
# Default: “~/sent”
# 
# This specifies the file into which your outgoing messages should be appended.
# (This is meant as the primary method for saving a copy of your messages, but
# another way to do this is using the "my_hdr" command to create a "Bcc:" field
# with your email address in it.)
# 
# The value of $record is overridden by the $force_name and $save_name variables,
# and the "fcc-hook" command. Also see $copy and $write_bcc.
# 
set record="=store"


# 3.328. reflow_space_quotes
# 
# Type: boolean
# Default: yes
# 
# This option controls how quotes from format=flowed messages are displayed in
# the pager and when replying (with $text_flowed unset). When set, this option
# adds spaces after each level of quote marks, turning ">>>foo" into "> > > foo".
# 
# Note: If $reflow_text is unset, this option has no effect. Also, this option
# does not affect replies when $text_flowed is set.
# 


# 3.329. reflow_text
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will reformat paragraphs in text/plain parts marked format=
# flowed. If unset, NeoMutt will display paragraphs unaltered from how they
# appear in the message body. See RFC3676 for details on the format=flowed
# format. 
# 
# Also see $reflow_wrap, and $wrap.
# 


# 3.330. reflow_wrap
# 
# Type: number
# Default: 78
# 
# This variable controls the maximum paragraph width when reformatting text/plain
# parts when $reflow_text is set. When the value is 0, paragraphs will be wrapped
# at the terminal's right margin. A positive value sets the paragraph width
# relative to the left margin. A negative value set the paragraph width relative
# to the right margin.
# 
# Be aware that the reformatted lines of a paragraph are still subject to $wrap.
# This means if $reflow_wrap is 40 and $wrap is 30, then the paragraph gets
# reformatted to 40 characters a line (due to $reflow_wrap) and afterwards each
# 40-character-line is split at 30 characters (due to $wrap), resulting in
# alternating line lengths of 30 and 10 characters.
# 
# Also see $wrap.
# 
set reflow_wrap=-10


# 3.331. reply_regex
# 
# Type: regular expression
# Default: “^((re|aw|sv)([[0-9]+])*:[ t]*)*”
# 
# A regular expression used to recognize reply messages when threading and
# replying. The default value corresponds to the standard Latin "Re:" prefix.
# 
# This value may have been localized by the translator for your locale, adding
# other prefixes that are common in the locale. You can add your own prefixes by
# appending inside "^(re)". For example: "^(re|sv)" or "^(re|aw|sv)".
# 
# The second parenthesized expression matches zero or more bracketed numbers
# following the prefix, such as "Re[1]: ". The initial "\[" means a literal
# left-bracket character. Note the backslash must be doubled when used inside a
# double quoted string in the neomuttrc. "[0-9]+" means one or more numbers. "\]
# " means a literal right-bracket. Finally the whole parenthesized expression has
# a "*" suffix, meaning it can occur zero or more times.
# 
# The last part matches a colon followed by an optional space or tab. Note "t"
# is converted to a literal tab inside a double quoted string. If you use a
# single quoted string, you would have to type an actual tab character, and would
# need to convert the double-backslashes to single backslashes.
# 
# Note: the result of this regex match against the subject is stored in the
# header cache. Mutt isn't smart enough to invalidate a header cache entry based
# on changing $reply_regex, so if you aren't seeing correct values in the index,
# try temporarily turning off the header cache. If that fixes the problem, then
# once the variable is set to your liking, remove your stale header cache files
# and turn the header cache back on.
# 


# 3.332. reply_self
# 
# Type: boolean
# Default: no
# 
# If unset and you are replying to a message sent by you, NeoMutt will assume
# that you want to reply to the recipients of that message rather than to
# yourself. 
# 
# Also see the "alternates" command.
# 


# 3.333. reply_to
# 
# Type: quadoption
# Default: ask-yes
# 
# If set, when replying to a message, NeoMutt will use the address listed in the
# Reply-to: header as the recipient of the reply. If unset, it will use the
# address in the From: header field instead. This option is useful for reading a
# mailing list that sets the Reply-To: header field to the list address and you
# want to send a private message to the author of a message.
# 


# 3.334. reply_with_xorig
# 
# Type: boolean
# Default: no
# 
# This variable provides a toggle. When active, the From: header will be
# extracted from the current mail's 'X-Original-To:' header. This setting does
# not have precedence over "reverse_real_name".
# 
# Assuming 'fast_reply' is disabled, this option will prompt the user with a
# prefilled From: header.
# 


# 3.335. resolve
# 
# Type: boolean
# Default: yes
# 
# When set, the cursor in a list will be automatically advanced to the next
# (possibly undeleted) message/attachment/entry whenever a command that modifies
# the current message/attachment/entry is executed.
# 
# Examples of such commands are tagging a message, deleting an entry, or saving
# an attachment.
# 


# 3.336. resume_draft_files
# 
# Type: boolean
# Default: no
# 
# If set, draft files (specified by -H on the command line) are processed
# similarly to when resuming a postponed message. Recipients are not prompted
# for; send-hooks are not evaluated; no alias expansion takes place; user-defined
# headers and signatures are not added to the message.
# 


# 3.337. resume_edited_draft_files
# 
# Type: boolean
# Default: yes
# 
# If set, draft files previously edited (via -E -H on the command line) will have
# $resume_draft_files automatically set when they are used as a draft file again.
# 
# The first time a draft file is saved, NeoMutt will add a header,
# X-Mutt-Resume-Draft to the saved file. The next time the draft file is read in,
# if NeoMutt sees the header, it will set $resume_draft_files.
# 
# This option is designed to prevent multiple signatures, user-defined headers,
# and other processing effects from being made multiple times to the draft file.
# 


# 3.338. reverse_alias
# 
# Type: boolean
# Default: no
# 
# This variable controls whether or not NeoMutt will display the "personal" name
# from your aliases in the index menu if it finds an alias that matches the
# message's sender. For example, if you have the following alias:
# 
# alias juser abd30425@somewhere.net (Joe User)
# 
# and then you receive mail which contains the following header:
# 
# From: abd30425@somewhere.net
# 
# It would be displayed in the index menu as "Joe User" instead of
# "abd30425@somewhere.net." This is useful when the person's e-mail address is
# not human friendly.
# 


# 3.339. reverse_name
# 
# Type: boolean
# Default: no
# 
# It may sometimes arrive that you receive mail to a certain machine, move the
# messages to another machine, and reply to some the messages from there. If this
# variable is set, the default From: line of the reply messages is built using
# the address where you received the messages you are replying to if that address
# matches your "alternates". If the variable is unset, or the address that would
# be used doesn't match your "alternates", the From: line will use your address
# on the current machine.
# 
# Also see the "alternates" command and $reverse_real_name.
# 
set reverse_name=yes


# 3.340. reverse_real_name
# 
# Type: boolean
# Default: yes
# 
# This variable fine-tunes the behavior of the $reverse_name feature.
# 
# When it is unset, NeoMutt will remove the real name part of a matching address.
# This allows the use of the email address without having to also use what the
# sender put in the real name field.
# 
# When it is set, NeoMutt will use the matching address as-is.
# 
# In either case, a missing real name will be filled in afterwards using the
# value of $real_name.
# 


# 3.341. rfc2047_parameters
# 
# Type: boolean
# Default: yes
# 
# When this variable is set, NeoMutt will decode RFC2047-encoded MIME parameters.
# You want to set this variable when NeoMutt suggests you to save attachments to
# files named like:
# 
# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= 
# =?utf-8?Q?z=C4=99ta.png?= 
# 
# When this variable is set interactively, the change won't be active until you
# change folders.
# 
# Note that this use of RFC2047's encoding is explicitly prohibited by the
# standard, but nevertheless encountered in the wild and produced by, e.g.,
# Outlook. 
# 
# Also note that setting this parameter will not have the effect that NeoMutt
# generates this kind of encoding. Instead, NeoMutt will unconditionally use the
# encoding specified in RFC2231.
# 
set rfc2047_parameters=yes


# 3.342. save_address
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will take the sender's full address when choosing a default
# folder for saving a mail. If $save_name or $force_name is set too, the
# selection of the Fcc folder will be changed as well.
# 


# 3.343. save_empty
# 
# Type: boolean
# Default: yes
# 
# When unset, mailboxes which contain no saved messages will be removed when
# closed (the exception is $spool_file which is never removed). If set, mailboxes
# are never removed.
# 
# Note: This only applies to mbox and MMDF folders, NeoMutt does not delete MH
# and Maildir directories.
# 


# 3.344. save_history
# 
# Type: number
# Default: 0
# 
# This variable controls the size of the history (per category) saved in the
# $history_file file.
# 
# Setting this to a value greater than $history is possible. However, there will
# never be more than $history entries to select from even if more are recorded in
# the history file.
# 
set save_history=100


# 3.345. save_name
# 
# Type: boolean
# Default: no
# 
# This variable controls how copies of outgoing messages are saved. When set, a
# check is made to see if a mailbox specified by the recipient address exists
# (this is done by searching for a mailbox in the $folder directory with the
# username part of the recipient address). If the mailbox exists, the outgoing
# message will be saved to that mailbox, otherwise the message is saved to the
# $record mailbox.
# 
# Also see the $force_name variable.
# 


# 3.346. save_unsubscribed
# 
# Type: boolean
# Default: no
# 
# When set, info about unsubscribed newsgroups will be saved into "newsrc" file
# and into cache.
# 


# 3.347. score
# 
# Type: boolean
# Default: yes
# 
# When this variable is unset, scoring is turned off. This can be useful to
# selectively disable scoring for certain folders when the
# $score_threshold_delete variable and related are used.
# 


# 3.348. score_threshold_delete
# 
# Type: number
# Default: -1
# 
# Messages which have been assigned a score equal to or lower than the value of
# this variable are automatically marked for deletion by NeoMutt. Since NeoMutt
# scores are always greater than or equal to zero, the default setting of this
# variable will never mark a message for deletion.
# 


# 3.349. score_threshold_flag
# 
# Type: number
# Default: 9999
# 
# Messages which have been assigned a score greater than or equal to this
# variable's value are automatically marked "flagged".
# 


# 3.350. score_threshold_read
# 
# Type: number
# Default: -1
# 
# Messages which have been assigned a score equal to or lower than the value of
# this variable are automatically marked as read by NeoMutt. Since NeoMutt scores
# are always greater than or equal to zero, the default setting of this variable
# will never mark a message read.
# 


# 3.351. search_context
# 
# Type: number
# Default: 0
# 
# For the pager, this variable specifies the number of lines shown before search
# results. By default, search results will be top-aligned.
# 
set search_context=5


# 3.352. send_charset
# 
# Type: string list
# Default: “us-ascii:iso-8859-1:utf-8”
# 
# A colon-delimited list of character sets for outgoing messages. NeoMutt will
# use the first character set into which the text can be converted exactly. If
# your $charset is not "iso-8859-1" and recipients may not understand "UTF-8", it
# is advisable to include in the list an appropriate widely used standard
# character set (such as "iso-8859-2", "koi8-r" or "iso-2022-jp") either instead
# of or after "iso-8859-1".
# 
# In case the text can't be converted into one of these exactly, NeoMutt uses
# $charset as a fallback.
# 
set send_charset="utf-8"


# 3.353. sendmail
# 
# Type: command
# Default: “/usr/sbin/sendmail -oem -oi”
# 
# Specifies the program and arguments used to deliver mail sent by NeoMutt.
# NeoMutt expects that the specified program interprets additional arguments as
# recipient addresses. NeoMutt appends all recipients after adding a -- delimiter
# (if not already present). Additional flags, such as for $use_8bit_mime,
# $use_envelope_from, $dsn_notify, or $dsn_return will be added before the
# delimiter. 
# 
# Note: This command is invoked differently from most other commands in NeoMutt.
# It is tokenized by space, and invoked directly via execvp(3) with an array of
# arguments - so commands or arguments with spaces in them are not supported. The
# shell is not used to run the command, so shell quoting is also not supported.
# 
# See also: $write_bcc.
# 
set sendmail="$my_confdir/sendmail"


# 3.354. sendmail_wait
# 
# Type: number
# Default: 0
# 
# Specifies the number of seconds to wait for the $sendmail process to finish
# before giving up and putting delivery in the background.
# 
# NeoMutt interprets the value of this variable as follows:
# 
# ┌──┬──────────────────────────────────────────────────────────────────┐ 
# │>0│number of seconds to wait for sendmail to finish before continuing│
# ├──┼──────────────────────────────────────────────────────────────────┤ 
# │0 │wait forever for sendmail to finish                               │
# ├──┼──────────────────────────────────────────────────────────────────┤ 
# │<0│always put sendmail in the background without waiting             │
# └──┴──────────────────────────────────────────────────────────────────┘ 
# 
# Note that if you specify a value other than 0, the output of the child process
# will be put in a temporary file. If there is some error, you will be informed
# as to where to find the output.
# 


# 3.355. shell
# 
# Type: command
# Default: “/bin/sh”
# 
# Command to use when spawning a subshell. If not specified, then the user's
# login shell from /etc/passwd is used.
# 


# 3.356. show_multipart_alternative
# 
# Type: string
# Default: (empty)
# 
# When set to info, the multipart/alternative information is shown. When set to
# inline, all of the alternatives are displayed. When not set, the default
# behavior is to show only the chosen alternative.
# 


# 3.357. show_new_news
# 
# Type: boolean
# Default: yes
# 
# If set, news server will be asked for new newsgroups on entering the browser.
# Otherwise, it will be done only once for a news server. Also controls whether
# or not number of new articles of subscribed newsgroups will be then checked.
# 


# 3.358. show_only_unread
# 
# Type: boolean
# Default: no
# 
# If set, only subscribed newsgroups that contain unread articles will be
# displayed in browser.
# 


# 3.359. sidebar_component_depth
# 
# Type: number
# Default: 0
# 
# By default the sidebar will show the mailbox's path, relative to the $folder
# variable. This specifies the number of parent directories to hide from display
# in the sidebar. For example: If a maildir is normally displayed in the sidebar
# as dir1/dir2/dir3/maildir, setting sidebar_component_depth=2 will display it as
# dir3/maildir, having truncated the 2 highest directories.
# 
# See also: $sidebar_short_path
# 


# 3.360. sidebar_delim_chars
# 
# Type: string
# Default: “/.”
# 
# This contains the list of characters which you would like to treat as folder
# separators for displaying paths in the sidebar.
# 
# Local mail is often arranged in directories: 'dir1/dir2/mailbox'.
# 
# set sidebar_delim_chars='/'
# 
# IMAP mailboxes are often named: 'folder1.folder2.mailbox'.
# 
# set sidebar_delim_chars='.'
# 
# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
# 


# 3.361. sidebar_divider_char
# 
# Type: string
# Default: “|”
# 
# The default is a Unicode vertical line.
# 
# This specifies the characters to be drawn between the sidebar (when visible)
# and the other NeoMutt panels. ASCII and Unicode line-drawing characters are
# supported. 
# 
# The divider char can be set to an empty string for some extra space. If empty,
# setting the sidebar_background color may help distinguish the sidebar from
# other panels.
# 
set sidebar_divider_char=" "


# 3.362. sidebar_folder_indent
# 
# Type: boolean
# Default: no
# 
# Set this to indent mailboxes in the sidebar.
# 
# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
# 
set sidebar_folder_indent=yes


# 3.363. sidebar_format
# 
# Type: string
# Default: “%D%*  %n”
# 
# This variable allows you to customize the sidebar display. This string is
# similar to $index_format, but has its own set of printf(3)-like sequences:
# 
# ┌───┬──┬──────────────────────────────────────────────────────────────────────┐ 
# │%a │  │Alert: 1 if user is notified of new mail                              │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%B │  │Name of the mailbox                                                   │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%d │* │Number of deleted messages in the mailbox                             │
# │ │@ │                                                                      │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%D │  │Descriptive name of the mailbox                                       │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%F │* │Number of flagged messages in the mailbox                             │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%L │* │Number of messages after limiting                                     │
# │ │@ │                                                                      │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%n │  │"N" if mailbox has new mail, " " (space) otherwise                    │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%N │* │Number of unread messages in the mailbox (seen or unseen)             │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%o │* │Number of old messages in the mailbox (unread, seen)                  │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%p │  │Poll: 1 if Mailbox is checked for new mail                            │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%r │* │Number of read messages in the mailbox (read, seen)                   │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%S │* │Size of mailbox (total number of messages)                            │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%t │* │Number of tagged messages in the mailbox                              │
# │ │@ │                                                                      │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%Z │* │Number of new messages in the mailbox (unread, unseen)                │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%! │  │"!" : one flagged message; "!!" : two flagged messages; "n!" : n      │
# │ │  │flagged messages (for n > 2). Otherwise prints nothing.               │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%>X│ │Right justify the rest of the string and pad with "X"                 │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%|X│ │Pad to the end of the line with "X"                                   │
# ├───┼──┼──────────────────────────────────────────────────────────────────────┤ 
# │%*X│ │Soft-fill with character "X" as pad                                   │
# └───┴──┴──────────────────────────────────────────────────────────────────────┘ 
# 
# * = Can be optionally printed if nonzero
# 
# @ = Only applicable to the current folder
# 
# In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus
# set, a suggested value for this option is "%B%<F? [%F]>%* %<N?%N/>%S".
# 
set sidebar_format="%D%?F? [%F]?%*  %?N?%N/?%S"


# 3.364. sidebar_indent_string
# 
# Type: string
# Default: “  ”
# 
# This specifies the string that is used to indent mailboxes in the sidebar. It
# defaults to two spaces.
# 
# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
# 
set sidebar_indent_string=" "


# 3.365. sidebar_new_mail_only
# 
# Type: boolean
# Default: no
# 
# When set, the sidebar will only display mailboxes containing new, or flagged,
# mail. 
# 
# See also: sidebar_pin, $sidebar_non_empty_mailbox_only.
# 


# 3.366. sidebar_next_new_wrap
# 
# Type: boolean
# Default: no
# 
# When set, the <sidebar-next-new> command will not stop at the end of the list
# of mailboxes, but wrap around to the beginning. The <sidebar-prev-new> command
# is similarly affected, wrapping around to the end of the list.
# 
set sidebar_next_new_wrap=yes


# 3.367. sidebar_non_empty_mailbox_only
# 
# Type: boolean
# Default: no
# 
# When set, the sidebar will only display mailboxes that contain one or more
# mails. 
# 
# See also: $sidebar_new_mail_only, sidebar_pin.
# 


# 3.368. sidebar_on_right
# 
# Type: boolean
# Default: no
# 
# When set, the sidebar will appear on the right-hand side of the screen.
# 


# 3.369. sidebar_short_path
# 
# Type: boolean
# Default: no
# 
# By default the sidebar will show the mailbox's path, relative to the $folder
# variable. Setting sidebar_shortpath=yes will shorten the names relative to the
# previous name. Here's an example:
# 
# ┌────────────┬─────────────┬───────────────────────────────────────────────┐ 
# │shortpath=no│shortpath=yes│shortpath=yes, folderindent=yes, indentstr=".."│
# ├────────────┼─────────────┼───────────────────────────────────────────────┤ 
# │fruit │fruit        │fruit                                          │
# ├────────────┼─────────────┼───────────────────────────────────────────────┤ 
# │fruit.apple │apple        │..apple                                        │
# ├────────────┼─────────────┼───────────────────────────────────────────────┤ 
# │fruit.banana│banana │..banana                                       │
# ├────────────┼─────────────┼───────────────────────────────────────────────┤ 
# │fruit.cherry│cherry │..cherry                                       │
# └────────────┴─────────────┴───────────────────────────────────────────────┘ 
# 
# See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string,
# $sidebar_component_depth. 
# 
set sidebar_short_path=no


# 3.370. sidebar_sort_method
# 
# Type: sort order
# Default: order
# 
# Specifies how to sort mailbox entries in the sidebar. By default, the entries
# are unsorted. Valid values:
# 
# • path (alphabetically)
# 
# • count (all message count)
# 
# • flagged (flagged message count)
# 
# • unread (unread message count)
# 
# • unsorted
# 
# You may optionally use the "reverse-" prefix to specify reverse sorting order
# (example: "set sidebar_sort_method=reverse-path").
# 
# The alpha and name values are synonyms for path. The new value is a synonym for
# unread. 
# 
set sidebar_sort_method=path


# 3.371. sidebar_visible
# 
# Type: boolean
# Default: no
# 
# This specifies whether or not to show sidebar. The sidebar shows a list of all
# your mailboxes.
# 
# See also: $sidebar_format, $sidebar_width
# 
set sidebar_visible=no


# 3.372. sidebar_width
# 
# Type: number
# Default: 30
# 
# This controls the width of the sidebar. It is measured in screen columns. For
# example: sidebar_width=20 could display 20 ASCII characters, or 10 Chinese
# characters. 
# 
set sidebar_width=20


# 3.373. sig_dashes
# 
# Type: boolean
# Default: yes
# 
# If set, a line containing "-- " (note the trailing space) will be inserted
# before your $signature. It is strongly recommended that you not unset this
# variable unless your signature contains just your name. The reason for this is
# because many software packages use "-- n" to detect your signature. For
# example, NeoMutt has the ability to highlight the signature in a different
# color in the built-in pager.
# 
set sig_dashes=no


# 3.374. sig_on_top
# 
# Type: boolean
# Default: no
# 
# If set, the signature will be included before any quoted or forwarded text. It
# is strongly recommended that you do not set this variable unless you really
# know what you are doing, and are prepared to take some heat from netiquette
# guardians. 
# 


# 3.375. signature
# 
# Type: path
# Default: “~/.signature”
# 
# Specifies the filename of your signature, which is appended to all outgoing
# messages. If the filename ends with a pipe ("|"), it is assumed that filename
# is a shell command and input should be read from its standard output.
# 


# 3.376. simple_search
# 
# Type: string
# Default: “~f %s | ~s %s”
# 
# Specifies how NeoMutt should expand a simple search into a real search pattern.
# A simple search is one that does not contain any of the "~" pattern operators.
# See "patterns" for more information on search patterns.
# 
# simple_search applies to several functions, e.g. <delete-pattern>, <limit>,
# searching in the index, and all of the index colors.
# 
# For example, if you simply type "joe" at a search or limit prompt, NeoMutt will
# automatically expand it to the value specified by this variable by replacing
# "%s" with the supplied string. For the default value, "joe" would be expanded
# to: "~f joe | ~s joe".
# 
set simple_search="~L %s | ~s %s"


# 3.377. size_show_bytes
# 
# Type: boolean
# Default: no
# 
# If set, message sizes will display bytes for values less than 1 kilobyte. See
# formatstrings-size. 
# 


# 3.378. size_show_fractions
# 
# Type: boolean
# Default: yes
# 
# If set, message sizes will be displayed with a single decimal value for sizes
# from 0 to 10 kilobytes and 1 to 10 megabytes. See formatstrings-size.
# 


# 3.379. size_show_mb
# 
# Type: boolean
# Default: yes
# 
# If set, message sizes will display megabytes for values greater than or equal
# to 1 megabyte. See formatstrings-size.
# 


# 3.380. size_units_on_left
# 
# Type: boolean
# Default: no
# 
# If set, message sizes units will be displayed to the left of the number. See
# formatstrings-size. 
# 


# 3.381. sleep_time
# 
# Type: number
# Default: 1
# 
# Specifies time, in seconds, to pause while displaying certain informational
# messages, while moving from folder to folder and after expunging messages from
# the current folder. The default is to pause one second, so a value of zero for
# this option suppresses the pause.
# 


# 3.382. smart_wrap
# 
# Type: boolean
# Default: yes
# 
# Controls the display of lines longer than the screen width in the internal
# pager. If set, long lines are wrapped at a word boundary. If unset, lines are
# simply wrapped at the screen edge. Also see the $markers variable.
# 


# 3.383. smileys
# 
# Type: regular expression
# Default: “(>From )|(:[-^]?[][)(><}{|/DP])”
# 
# The pager uses this variable to catch some common false positives of
# $quote_regex, most notably smileys and not consider a line quoted text if it
# also matches $smileys. This mostly happens at the beginning of a line.
# 


# 3.384. smime_ask_cert_label
# 
# Type: boolean
# Default: yes
# 
# This flag controls whether you want to be asked to enter a label for a
# certificate about to be added to the database or not. It is set by default. (S/
# MIME only)
# 


# 3.385. smime_ca_location
# 
# Type: path
# Default: (empty)
# 
# This variable contains the name of either a directory, or a file which contains
# trusted certificates for use with OpenSSL. (S/MIME only)
# 


# 3.386. smime_certificates
# 
# Type: path
# Default: (empty)
# 
# Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
# storage and retrieval of keys by itself. This is very basic right now, and keys
# and certificates are stored in two different directories, both named as the
# hash-value retrieved from OpenSSL. There is an index file which contains
# mailbox-address keyid pairs, and which can be manually edited. This option
# points to the location of the certificates. (S/MIME only)
# 
set smime_certificates="~/.smime/certificates"


# 3.387. smime_decrypt_command
# 
# Type: command
# Default: (empty)
# 
# This format string specifies a command which is used to decrypt application/
# pkcs7-mime attachments.
# 
# The OpenSSL command formats have their own set of printf(3)-like sequences
# similar to PGP's:
# 
# ┌──┬──────────────────────────────────────────────────────────────────────────┐ 
# │%a│The algorithm used for encryption.                                        │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%c│One or more certificate IDs.                                              │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │ │CA location: Depending on whether $smime_ca_location points to a directory│
# │%C│or file, this expands to "-CApath $smime_ca_location" or "-CAfile         │
# │ │$smime_ca_location".                                                      │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%d│The message digest algorithm specified with $smime_sign_digest_alg.       │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%f│Expands to the name of a file containing a message.                       │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%i│Intermediate certificates                                                 │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%k│The key-pair specified with $smime_default_key                            │
# ├──┼──────────────────────────────────────────────────────────────────────────┤ 
# │%s│Expands to the name of a file containing the signature part of a multipart│
# │ │/signed attachment when verifying it.                                     │
# └──┴──────────────────────────────────────────────────────────────────────────┘ 
# 
# For examples on how to configure these formats, see the smime.rc in the samples
# / subdirectory which has been installed on your system alongside the
# documentation. (S/MIME only)
# 


# 3.388. smime_decrypt_use_default_key
# 
# Type: boolean
# Default: yes
# 
# If set (default) this tells NeoMutt to use the default key for decryption.
# Otherwise, if managing multiple certificate-key-pairs, NeoMutt will try to use
# the mailbox-address to determine the key to use. It will ask you to supply a
# key, if it can't find one. (S/MIME only)
# 


# 3.389. smime_default_key
# 
# Type: string
# Default: (empty)
# 
# This is the default key-pair to use for S/MIME operations, and must be set to
# the keyid (the hash-value that OpenSSL generates) to work properly.
# 
# It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt).
# If GPGME is enabled, this is the key id displayed by gpgsm.
# 
# It will be used for decryption unless $smime_decrypt_use_default_key is unset.
# 
# It will also be used for signing unless $smime_sign_as is set.
# 
# The (now deprecated) smime_self_encrypt_as is an alias for this variable, and
# should no longer be used. (S/MIME only)
# 


# 3.390. smime_encrypt_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to create encrypted S/MIME messages.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 
# Encrypt the message to $smime_default_key too. (S/MIME only)
# 
# Note: On Debian systems, this defaults to the first existing file in the
# following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt /etc/ssl/
# certs/ca-certificates.crt. 
# 


# 3.391. smime_encrypt_with
# 
# Type: string
# Default: “aes256”
# 
# This sets the algorithm that should be used for encryption. Valid choices are
# "aes128", "aes192", "aes256", "des", "des3", "rc2-40", "rc2-64", "rc2-128". (S/
# MIME only)
# 


# 3.392. smime_get_cert_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to extract X509 certificates from a PKCS7 structure.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.393. smime_get_cert_email_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to extract the mail address(es) used for storing X509
# certificates, and for verification purposes (to check whether the certificate
# was issued for the sender's mailbox).
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.394. smime_get_signer_cert_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to extract only the signers X509 certificate from a S/MIME
# signature, so that the certificate's owner may get compared to the email's
# "From:" field.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.395. smime_import_cert_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to import a certificate via smime_keys.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. NOTE: %c and %k will default to $smime_sign_as if
# set, otherwise $smime_default_key. (S/MIME only)
# 


# 3.396. smime_is_default
# 
# Type: boolean
# Default: no
# 
# The default behavior of NeoMutt is to use PGP on all auto-sign/encryption
# operations. To override and to use OpenSSL instead this must be set. However,
# this has no effect while replying, since NeoMutt will automatically select the
# same application that was used to sign/encrypt the original message. (Note that
# this variable can be overridden by unsetting $crypt_auto_smime.) (S/MIME only)
# 


# 3.397. smime_keys
# 
# Type: path
# Default: (empty)
# 
# Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
# storage and retrieval of keys/certs by itself. This is very basic right now,
# and stores keys and certificates in two different directories, both named as
# the hash-value retrieved from OpenSSL. There is an index file which contains
# mailbox-address keyid pair, and which can be manually edited. This option
# points to the location of the private keys. (S/MIME only)
# 
set smime_keys="~/.smime/keys"


# 3.398. smime_pk7out_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to extract PKCS7 structures of S/MIME signatures, in order
# to extract the public X509 certificate(s).
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.399. smime_self_encrypt
# 
# Type: boolean
# Default: yes
# 
# When set, S/MIME encrypted messages will also be encrypted using the
# certificate in $smime_default_key. (S/MIME only)
# 


# 3.400. smime_sign_as
# 
# Type: string
# Default: (empty)
# 
# If you have a separate key to use for signing, you should set this to the
# signing key. Most people will only need to set $smime_default_key. (S/MIME
# only) 
# 


# 3.401. smime_sign_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to created S/MIME signatures of type multipart/signed,
# which can be read by all mail clients.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.402. smime_sign_digest_alg
# 
# Type: string
# Default: “sha256”
# 
# This sets the algorithm that should be used for the signature message digest.
# Valid choices are "md5", "sha1", "sha224", "sha256", "sha384", "sha512". (S/
# MIME only)
# 


# 3.403. smime_timeout
# 
# Type: number
# Default: 300
# 
# The number of seconds after which a cached passphrase will expire if not used.
# (S/MIME only)
# 


# 3.404. smime_verify_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to verify S/MIME signatures of type multipart/signed.
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.405. smime_verify_opaque_command
# 
# Type: command
# Default: (empty)
# 
# This command is used to verify S/MIME signatures of type application/
# pkcs7-mime. 
# 
# This is a format string, see the $smime_decrypt_command command for possible
# printf(3)-like sequences. (S/MIME only)
# 


# 3.406. smtp_authenticators
# 
# Type: string list
# Default: (empty)
# 
# This is a colon-separated list of authentication methods NeoMutt may attempt to
# use to log in to an SMTP server, in the order NeoMutt should try them.
# Authentication methods are any SASL mechanism, e.g. "plain", "digest-md5",
# "gssapi" or "cram-md5". This option is case-insensitive. If it is "unset" (the
# default) NeoMutt will try all available methods, in order from most-secure to
# least-secure. Support for the "plain" mechanism is bundled; other mechanisms
# are provided by an external SASL library (look for '+sasl' in the output of
# neomutt -v).
# 
# Example: 
# 
# set smtp_authenticators="digest-md5:cram-md5"
# 


# 3.407. smtp_oauth_refresh_command
# 
# Type: command
# Default: (empty)
# 
# The command to run to generate an OAUTH refresh token for authorizing your
# connection to your SMTP server. This command will be run on every connection
# attempt that uses the OAUTHBEARER or XOAUTH2 authentication mechanisms. See "
# oauth" for details.
# 


# 3.408. smtp_pass
# 
# Type: string
# Default: (empty)
# 
# Specifies the password for your SMTP account. If unset, NeoMutt will prompt you
# for your password when you first send mail via SMTP. See $smtp_url to configure
# NeoMutt to send mail via SMTP.
# 
# Warning: you should only use this option when you are on a fairly secure
# machine, because the superuser can read your neomuttrc even if you are the only
# one who can read the file.
# 


# 3.409. smtp_url
# 
# Type: string
# Default: (empty)
# 
# Defines the SMTP smarthost where sent messages should relayed for delivery.
# This should take the form of an SMTP URL, e.g.:
# 
# smtp[s]://[user[:pass]@]host[:port] 
# 
# where "[...]" denotes an optional part. Setting this variable overrides the
# value of the $sendmail variable.
# 
# Also see $write_bcc.
# 


# 3.410. smtp_user
# 
# Type: string
# Default: (empty)
# 
# The username for the SMTP server.
# 
# This variable defaults to your user name on the local machine.
# 


# 3.411. socket_timeout
# 
# Type: number
# Default: 30
# 
# Causes NeoMutt to timeout any socket connect/read/write operation (for IMAP,
# POP or SMTP) after this many seconds. A negative value causes NeoMutt to wait
# indefinitely. 
# 


# 3.412. sort
# 
# Type: sort order
# Default: date
# 
# Specifies how to sort messages in the "index" menu. Valid values are:
# 
# • date
# 
# • date-received
# 
# • from
# 
# • score
# 
# • size
# 
# • spam
# 
# • subject
# 
# • threads
# 
# • to
# 
# • unsorted
# 
# You may optionally use the "reverse-" prefix to specify reverse sorting order,
# or the "last-" prefix to sort threads based on the corresponding attribute of
# the last descendant rather than the thread root. If both prefixes are in use,
# "reverse-" must come before "last-". The "last-" prefix has no effect on a flat
# view. 
# 
# Any ties in the primary sort are broken by $sort_aux. When $use_threads is
# "threads" or "reverse", $sort controls the sorting between threads, and
# $sort_aux controls the sorting within a thread.
# 
# The "date-sent" value is a synonym for "date". The "mailbox-order" value is a
# synonym for "unsorted".
# 
# The values of "threads" and "reverse-threads" are legacy options, which cause
# the value of $sort_aux to also control sorting between threads, and they may
# not be used with the "last-" prefix. The preferred way to enable a threaded
# view is via $use_threads. This variable can also be set via the <sort-mailbox>
# and <sort-reverse> functions.
# 
# Note: When $use_threads is "threads", the last thread sorts to the bottom; when
# it is "reversed", the last thread sorts to the top. The use of "reverse-" in
# $sort swaps which end the last thread will sort to.
# 
# See the "Use Threads Feature" section for further explanation and examples,
# https://neomutt.org/feature/use-threads 
# 
set sort=threads


# 3.413. sort_alias
# 
# Type: sort order
# Default: alias
# 
# Specifies how the entries in the "alias" menu are sorted. The following are
# legal values:
# 
# • address (sort alphabetically by email address)
# 
# • alias (sort alphabetically by alias name)
# 
# • unsorted (leave in order specified in .neomuttrc)
# 
# Note: This also affects the entries of the address query menu, thus potentially
# overruling the order of entries as generated by $query_command.
# 


# 3.414. sort_aux
# 
# Type: sort order
# Default: date
# 
# This provides a secondary sort for messages in the "index" menu, used when the
# $sort value is equal for two messages.
# 
# When sorting by threads, this variable controls how subthreads are sorted
# within a single thread (for the order between threads, see $sort). This can be
# set to any value that $sort can, including with the use of "reverse-" and
# "last-" prefixes, except for variations using "threads" (in that case, NeoMutt
# will just use "date"). For instance,
# 
# set sort_aux=last-date-received
# 
# would mean that if a new message is received in a thread, that subthread
# becomes the last one displayed (or the first, if you have "set use_threads=
# reverse".) When using $use_threads, it is more common to use "last-" with $sort
# and not with $sort_aux.
# 
# See the "Use Threads Feature" section for further explanation and examples,
# https://neomutt.org/feature/use-threads 
# 
set sort_aux=last-date-received


# 3.415. sort_browser
# 
# Type: sort order
# Default: alpha
# 
# Specifies how to sort entries in the file browser. By default, the entries are
# sorted alphabetically. Valid values:
# 
# • alpha (alphabetically)
# 
# • count (all message count)
# 
# • date
# 
# • desc (description)
# 
# • new (new message count)
# 
# • size
# 
# • unsorted
# 
# You may optionally use the "reverse-" prefix to specify reverse sorting order
# (example: "set sort_browser=reverse-date").
# 
# The "unread" value is a synonym for "new".
# 


# 3.416. sort_re
# 
# Type: boolean
# Default: yes
# 
# This variable is only useful when sorting by threads with $strict_threads unset
# . In that case, it changes the heuristic neomutt uses to thread messages by
# subject. With $sort_re set, neomutt will only attach a message as the child of
# another message by subject if the subject of the child message starts with a
# substring matching the setting of $reply_regex. With $sort_re unset, neomutt
# will attach the message whether or not this is the case, as long as the non-
# $reply_regex parts of both messages are identical.
# 


# 3.417. spam_separator
# 
# Type: string
# Default: “,”
# 
# This variable controls what happens when multiple spam headers are matched: if
# unset, each successive header will overwrite any previous matches value for the
# spam label. If set, each successive match will append to the previous, using
# this variable's value as a separator.
# 


# 3.418. spool_file
# 
# Type: mailbox
# Default: (empty)
# 
# If your spool mailbox is in a non-default place where NeoMutt can't find it,
# you can specify its location with this variable. The description from
# "named-mailboxes" or "virtual-mailboxes" may be used for the spool_file.
# 
# If not specified, then the environment variables $MAIL and $MAILDIR will be
# checked. 
# 
set spool_file="=inbox"


# 3.419. ssl_ca_certificates_file
# 
# Type: path
# Default: (empty)
# 
# This variable specifies a file containing trusted CA certificates. Any server
# certificate that is signed with one of these CA certificates is also
# automatically accepted. (GnuTLS only)
# 
# Example: 
# 
# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
# 
set ssl_ca_certificates_file="/etc/ssl/certs/ca-certificates.crt"


# 3.420. ssl_ciphers
# 
# Type: string
# Default: (empty)
# 
# Contains a colon-separated list of ciphers to use when using SSL. For OpenSSL,
# see ciphers(1) for the syntax of the string.
# 
# For GnuTLS, this option will be used in place of "NORMAL" at the start of the
# priority string. See gnutls_priority_init(3) for the syntax and more details.
# (Note: GnuTLS version 2.1.7 or higher is required.)
# 


# 3.421. ssl_client_cert
# 
# Type: path
# Default: (empty)
# 
# The file containing a client certificate and its associated private key.
# 


# 3.422. ssl_force_tls
# 
# Type: boolean
# Default: yes
# 
# If this variable is set, NeoMutt will require that all connections to remote
# servers be encrypted. Furthermore it will attempt to negotiate TLS even if the
# server does not advertise the capability, since it would otherwise have to
# abort the connection anyway. This option supersedes $ssl_starttls.
# 


# 3.423. ssl_min_dh_prime_bits
# 
# Type: number
# Default: 0
# 
# This variable specifies the minimum acceptable prime size (in bits) for use in
# any Diffie-Hellman key exchange. A value of 0 will use the default from the
# GNUTLS library. (GnuTLS only)
# 


# 3.424. ssl_starttls
# 
# Type: quadoption
# Default: yes
# 
# If set (the default), NeoMutt will attempt to use STARTTLS on servers
# advertising the capability. When unset, NeoMutt will not attempt to use
# STARTTLS regardless of the server's capabilities.
# 
# Note that STARTTLS is subject to many kinds of attacks, including the ability
# of a machine-in-the-middle to suppress the advertising of support. Setting
# $ssl_force_tls is recommended if you rely on STARTTLS.
# 


# 3.425. ssl_use_sslv2
# 
# Type: boolean
# Default: no
# 
# If set , NeoMutt will use SSLv2 when communicating with servers that request
# it. N.B. As of 2011, SSLv2 is considered insecure, and using is inadvisable.
# See https://tools.ietf.org/html/rfc6176 (OpenSSL only)
# 


# 3.426. ssl_use_sslv3
# 
# Type: boolean
# Default: no
# 
# If set , NeoMutt will use SSLv3 when communicating with servers that request
# it. N.B. As of 2015, SSLv3 is considered insecure, and using it is inadvisable.
# See https://tools.ietf.org/html/rfc7525
# 


# 3.427. ssl_use_system_certs
# 
# Type: boolean
# Default: yes
# 
# If set to yes, NeoMutt will use CA certificates in the system-wide certificate
# store when checking if a server certificate is signed by a trusted CA. (OpenSSL
# only) 
# 


# 3.428. ssl_use_tlsv1
# 
# Type: boolean
# Default: no
# 
# If set , NeoMutt will use TLSv1.0 when communicating with servers that request
# it. N.B. As of 2015, TLSv1.0 is considered insecure, and using it is
# inadvisable. See https://tools.ietf.org/html/rfc7525
# 


# 3.429. ssl_use_tlsv1_1
# 
# Type: boolean
# Default: no
# 
# If set , NeoMutt will use TLSv1.1 when communicating with servers that request
# it. N.B. As of 2015, TLSv1.1 is considered insecure, and using it is
# inadvisable. See https://tools.ietf.org/html/rfc7525
# 


# 3.430. ssl_use_tlsv1_2
# 
# Type: boolean
# Default: yes
# 
# If set , NeoMutt will use TLSv1.2 when communicating with servers that request
# it. 
# 


# 3.431. ssl_use_tlsv1_3
# 
# Type: boolean
# Default: yes
# 
# If set , NeoMutt will use TLSv1.3 when communicating with servers that request
# it. 
# 


# 3.432. ssl_verify_dates
# 
# Type: boolean
# Default: yes
# 
# If set (the default), NeoMutt will not automatically accept a server
# certificate that is either not yet valid or already expired. You should only
# unset this for particular known hosts, using the <account-hook> function.
# 


# 3.433. ssl_verify_host
# 
# Type: boolean
# Default: yes
# 
# If set (the default), NeoMutt will not automatically accept a server
# certificate whose host name does not match the host used in your folder URL.
# You should only unset this for particular known hosts, using the <account-hook>
# function. 
# 


# 3.434. ssl_verify_partial_chains
# 
# Type: boolean
# Default: no
# 
# This option should not be changed from the default unless you understand what
# you are doing.
# 
# Setting this variable to yes will permit verifying partial certification
# chains, i. e. a certificate chain where not the root, but an intermediate
# certificate CA, or the host certificate, are marked trusted (in
# $certificate_file), without marking the root signing CA as trusted.
# 
# (OpenSSL 1.0.2b and newer only).
# 


# 3.435. status_chars
# 
# Type: character string
# Default: “-*%A”
# 
# Controls the characters used by the "%r" indicator in $status_format.
# 
# ┌─────────┬───────┬───────────────────────────────────────────────────────────┐ 
# │Character│Default│Description │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │1 │-      │Mailbox is unchanged                                       │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │2 │*      │Mailbox has been changed and needs to be resynchronized    │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │ │       │Mailbox is read-only, or will not be written when exiting. │
# │3 │%      │(You can toggle whether to write changes to a mailbox with │
# │ │       │the <toggle-write> operation, bound by default to "%")     │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │ │       │Folder opened in attach-message mode. (Certain operations  │
# │4 │A      │like composing a new mail, replying, forwarding, etc. are  │
# │ │       │not permitted in this mode)                                │
# └─────────┴───────┴───────────────────────────────────────────────────────────┘ 
# 


# 3.436. status_format
# 
# Type: string
# Default: “-%r-NeoMutt: %D [Msgs:%<M?%M/>%m%<n? New:%n>%<o? Old:%o>%<d? Del:%d>%
# <F? Flag:%F>%<t? Tag:%t>%<p? Post:%p>%<b? Inc:%b>%<l? %l>]---(%<T?%T/>%s/%S)-%>
# -(%P)---” 
# 
# Controls the format of the status line displayed in the "index" menu. This
# string is similar to $index_format, but has its own set of printf(3)-like
# sequences: 
# 
# ┌───┬─┬───────────────────────────────────────────────────────────────────────┐ 
# │%b │*│Number of mailboxes with new mail                                      │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%d │*│Number of deleted messages                                             │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%D │ │Description of the mailbox                                             │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%f │ │The full pathname of the current mailbox                               │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%F │*│Number of flagged messages                                             │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%h │ │Local hostname                                                         │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%l │*│Size (in bytes) of the current mailbox (see formatstrings-size)        │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%L │*│Size (in bytes) of the messages shown (i.e., which match the current   │
# │ │ │limit) (see formatstrings-size)                                        │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%m │*│The number of messages in the mailbox                                  │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%M │*│The number of messages shown (i.e., which match the current limit)     │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%n │*│Number of new messages in the mailbox (unread, unseen)                 │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%o │*│Number of old messages in the mailbox (unread, seen)                   │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%p │*│Number of postponed messages                                           │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%P │ │Percentage of the way through the index                                │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%r │ │Modified/read-only/won't-write/attach-message indicator, According to  │
# │ │ │$status_chars                                                          │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%R │*│Number of read messages in the mailbox (read, seen)                    │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%s │ │Current sorting mode ($sort)                                           │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%S │ │Current aux sorting method ($sort_aux)                                 │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%t │*│Number of tagged messages in the mailbox                               │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%T │*│Current threading mode ($use_threads)                                  │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%u │*│Number of unread messages in the mailbox (seen or unseen)              │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%v │ │NeoMutt version string                                                 │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%V │*│Currently active limit pattern, if any                                 │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%>X│ │Right justify the rest of the string and pad with "X"                  │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%|X│ │Pad to the end of the line with "X"                                    │
# ├───┼─┼───────────────────────────────────────────────────────────────────────┤ 
# │%*X│ │Soft-fill with character "X" as pad                                    │
# └───┴─┴───────────────────────────────────────────────────────────────────────┘ 
# 
# For an explanation of "soft-fill", see the $index_format documentation.
# 
# * = can be optionally printed if nonzero
# 
# Some of the above sequences can be used to optionally print a string if their
# value is nonzero. For example, you may only want to see the number of flagged
# messages if such messages exist, since zero is not particularly meaningful. To
# optionally print a string based upon one of the above sequences, the following
# construct is used:
# 
# %<sequence_char?optional_string> 
# 
# where sequence_char is a character from the table above, and optional_string is
# the string you would like printed if sequence_char is nonzero. optional_string
# may contain other sequences as well as normal text.
# 
# Here is an example illustrating how to optionally print the number of new
# messages in a mailbox:
# 
# %<n?%n new messages>
# 
# You can also switch between two strings using the following construct:
# 
# %<sequence_char?if_string&else_string> 
# 
# If the value of sequence_char is non-zero, if_string will be expanded,
# otherwise else_string will be expanded.
# 
# As another example, here is how to show either $sort and $sort_aux or
# $use_threads and $sort, based on whether threads are enabled with $use_threads:
# 
# %<T?%s/%S&%T/%s> 
# 
# You can force the result of any printf(3)-like sequence to be lowercase by
# prefixing the sequence character with an underscore ("_") sign. For example, if
# you want to display the local hostname in lowercase, you would use: "%_h".
# 
# If you prefix the sequence character with a colon (":") character, NeoMutt will
# replace any dots in the expansion by underscores. This might be helpful with
# IMAP folders that don't like dots in folder names.
# 
set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "


# 3.437. status_on_top
# 
# Type: boolean
# Default: no
# 
# Setting this variable causes the "status bar" to be displayed on the first line
# of the screen rather than near the bottom. If $help is set too, it'll be placed
# at the bottom.
# 


# 3.438. strict_threads
# 
# Type: boolean
# Default: no
# 
# If set, threading will only make use of the "In-Reply-To" and "References:"
# fields when you $sort by message threads. By default, messages with the same
# subject are grouped together in "pseudo threads.". This may not always be
# desirable, such as in a personal mailbox where you might have several unrelated
# messages with the subjects like "hi" which will get grouped together. See also
# $sort_re for a less drastic way of controlling this behavior.
# 
set strict_threads=yes


# 3.439. suspend
# 
# Type: boolean
# Default: yes
# 
# When unset, NeoMutt won't stop when the user presses the terminal's susp key,
# usually "^Z". This is useful if you run NeoMutt inside an xterm using a command
# like "xterm -e neomutt".
# 
# On startup NeoMutt tries to detect if it is the process session leader. If so,
# the default of suspend is "no" otherwise "yes". This default covers the above
# mentioned use case of "xterm -e neomutt".
# 


# 3.440. text_flowed
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will generate "format=flowed" bodies with a content type of
# "text/plain; format=flowed". This format is easier to handle for some mailing
# software, and generally just looks like ordinary text. To actually make use of
# this format's features, you'll need support in your editor.
# 
# The option only controls newly composed messages. Postponed messages, resent
# messages, and draft messages (via -H on the command line) will use the
# content-type of the source message.
# 
# Note that $indent_string is ignored when this option is set.
# 
set text_flowed=yes


# 3.441. thorough_search
# 
# Type: boolean
# Default: yes
# 
# Affects the ~b, ~B, and ~h search operations described in section "patterns".
# If set, the headers and body/attachments of messages to be searched are decoded
# before searching. If unset, messages are searched as they appear in the folder.
# 
# Users searching attachments or for non-ASCII characters should set this value
# because decoding also includes MIME parsing/decoding and possible character set
# conversions. Otherwise NeoMutt will attempt to match against the raw message
# received (for example quoted-printable encoded or with encoded headers) which
# may lead to incorrect search results.
# 
set thorough_search=yes


# 3.442. thread_received
# 
# Type: boolean
# Default: no
# 
# If $strict_threads is unset, then messages may also be grouped by subject.
# Unlike threading by "In-Reply-To:" and "References:" header, grouping by
# subject does not imply a parent-child relation between two messages.
# 
# To determine the ancestry between messages grouped by subject, Neomutt uses
# their date: only newer messages can be descendants of older ones.
# 
# When $thread_received is set, NeoMutt uses the date received rather than the
# date sent when comparing messages for the date.
# 
# See also $strict_threads, and $sort_re.
# 
set thread_received=yes


# 3.443. tilde
# 
# Type: boolean
# Default: no
# 
# When set, the internal-pager will pad blank lines to the bottom of the screen
# with a tilde ("~").
# 
set tilde=yes


# 3.444. time_inc
# 
# Type: number
# Default: 0
# 
# Along with $read_inc, $write_inc, and $net_inc, this variable controls the
# frequency with which progress updates are displayed. It suppresses updates less
# than $time_inc milliseconds apart. This can improve throughput on systems with
# slow terminals, or when running NeoMutt on a remote system.
# 
# Also see the "tuning" section of the manual for performance considerations.
# 
set time_inc=250


# 3.445. timeout
# 
# Type: number
# Default: 600
# 
# When NeoMutt is waiting for user input either idling in menus or in an
# interactive prompt, NeoMutt would block until input is present. Depending on
# the context, this would prevent certain operations from working, like checking
# for new mail or keeping an IMAP connection alive.
# 
# This variable controls how many seconds NeoMutt will at most wait until it
# aborts waiting for input, performs these operations and continues to wait for
# input. 
# 
# A value of zero or less will cause NeoMutt to never time out.
# 


# 3.446. tmp_dir
# 
# Type: path
# Default: “/tmp”
# 
# This variable allows you to specify where NeoMutt will place its temporary
# files needed for displaying and composing messages.
# 
# If this variable is not set, the environment variable $TMPDIR is used. Failing
# that, then "/tmp" is used.
# 


# 3.447. to_chars
# 
# Type: character string
# Default: “ +TCFLR”
# 
# Controls the character used to indicate mail addressed to you.
# 
# ┌─────────┬───────┬───────────────────────────────────────────────────────────┐ 
# │Character│Default│Description │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │1 │<space>│The mail is not addressed to your address.                 │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │2 │+      │You are the only recipient of the message.                 │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │3 │T      │Your address appears in the "To:" header field, but you are│
# │ │       │not the only recipient of the message.                     │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │4 │C      │Your address is specified in the "Cc:" header field, but   │
# │ │       │you are not the only recipient.                            │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │5 │F      │Indicates the mail that was sent by you.                   │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │6 │L      │Indicates the mail was sent to a mailing-list you subscribe│
# │ │       │to.                                                        │
# ├─────────┼───────┼───────────────────────────────────────────────────────────┤ 
# │7 │R      │Your address appears in the "Reply-To:" header field but   │
# │ │       │none of the above applies.                                 │
# └─────────┴───────┴───────────────────────────────────────────────────────────┘ 
# 


# 3.448. toggle_quoted_show_levels
# 
# Type: number
# Default: 0
# 
# Quoted text may be filtered out using the <toggle-quoted> command. If set to a
# number greater than 0, then the <toggle-quoted> command will only filter out
# quote levels above this number.
# 


# 3.449. trash
# 
# Type: mailbox
# Default: (empty)
# 
# If set, this variable specifies the path of the trash folder where the mails
# marked for deletion will be moved, instead of being irremediably purged.
# 
# NOTE: When you delete a message in the trash folder, it is really deleted, so
# that you have a way to clean the trash.
# 


# 3.450. ts_enabled
# 
# Type: boolean
# Default: no
# 
# Controls whether NeoMutt tries to set the terminal status line and icon name.
# Most terminal emulators emulate the status line in the window title.
# 
set ts_enabled=yes


# 3.451. ts_icon_format
# 
# Type: string
# Default: “M%<n?AIL&ail>”
# 
# Controls the format of the icon title, as long as "$ts_enabled" is set. This
# string is identical in formatting to the one used by "$status_format".
# 


# 3.452. ts_status_format
# 
# Type: string
# Default: “NeoMutt with %<m?%m messages&no messages>%<n? [%n NEW]>”
# 
# Controls the format of the terminal status line (or window title), provided
# that "$ts_enabled" has been set. This string is identical in formatting to the
# one used by "$status_format".
# 
set ts_status_format="[`tty|sed -re 's,.+pts/,,'`]mutt@%h%r %f%?V?[%V]&?"


# 3.453. tunnel
# 
# Type: command
# Default: (empty)
# 
# Setting this variable will cause NeoMutt to open a pipe to a command instead of
# a raw socket. You may be able to use this to set up preauthenticated
# connections to your IMAP/POP3/SMTP server. Example:
# 
# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
# 
# Note: For this example to work you must be able to log in to the remote machine
# without having to enter a password.
# 
# When set, NeoMutt uses the tunnel for all remote connections. Please see "
# account-hook" in the manual for how to use different tunnel commands per
# connection. 
# 


# 3.454. tunnel_is_secure
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will assume the $tunnel connection does not need STARTTLS to
# be enabled. It will also allow IMAP PREAUTH server responses inside a tunnel to
# proceed. This is appropriate if $tunnel uses ssh or directly invokes the server
# locally. 
# 
# When unset, NeoMutt will negotiate STARTTLS according to the ssl_starttls and
# ssl_force_tls variables. If ssl_force_tls is set, NeoMutt will abort connecting
# if an IMAP server responds with PREAUTH. This setting is appropriate if $tunnel
# does not provide security and could be tampered with by attackers.
# 


# 3.455. uncollapse_jump
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will jump to the next unread message, if any, when the
# current thread is uncollapsed.
# 


# 3.456. uncollapse_new
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will automatically uncollapse any collapsed thread that
# receives a newly delivered message. When unset, collapsed threads will remain
# collapsed. The presence of the newly delivered message will still affect index
# sorting, though.
# 


# 3.457. use_8bit_mime
# 
# Type: boolean
# Default: no
# 
# Warning: do not set this variable unless you are using a version of sendmail
# which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be
# able to send mail.
# 
# When set, NeoMutt will invoke $sendmail with the -B8BITMIME flag when sending
# 8-bit messages to enable ESMTP negotiation.
# 


# 3.458. use_domain
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will qualify all local addresses (ones without the "@host"
# portion) with the value of $hostname. If unset, no addresses will be qualified.
# 


# 3.459. use_envelope_from
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will set the envelope sender of the message. If
# $envelope_from_address is set, it will be used as the sender address. If unset,
# NeoMutt will attempt to derive the sender from the "From:" header.
# 
# Note that this information is passed to sendmail command using the -f command
# line switch. Therefore setting this option is not useful if the $sendmail
# variable already contains -f or if the executable pointed to by $sendmail
# doesn't support the -f switch.
# 
set use_envelope_from=yes


# 3.460. use_from
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will generate the "From:" header field when sending messages.
# If unset, no "From:" header field will be generated unless the user explicitly
# sets one using the "my_hdr" command.
# 


# 3.461. use_ipv6
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will look for IPv6 addresses of hosts it tries to contact. If
# this option is unset, NeoMutt will restrict itself to IPv4 addresses. Normally,
# the default should work.
# 


# 3.462. use_threads
# 
# Type: enumeration
# Default: unset
# 
# The style of threading used in the index. May be one of "flat" (no threading),
# "threads" (threaded, with subthreads below root message) or "reverse"
# (threaded, with subthreads above root message). For convenience, the value
# "yes" is a synonym for "threads", and "no" is a synonym for "flat".
# 
# If this variable is never set, then $sort controls whether threading is used,
# $sort_aux controls both the sorting of threads and subthreads, and using
# <sort-mailbox> to select threads affects only $sort. Once this variable is set,
# attempting to set $sort to a value using "threads" will warn, the value of
# $sort controls the sorting between threads while $sort_aux controls sorting
# within a thread, and <sort-mailbox> toggles $use_threads.
# 
# Example: 
# 
# set use_threads=yes
# 
# See the "Use Threads Feature" section for further explanation and examples.
# 
# Note: On Debian systems, this option is set by default to “threads” in /etc/
# neomuttrc. 
# 


# 3.463. user_agent
# 
# Type: boolean
# Default: no
# 
# When set, NeoMutt will add a "User-Agent:" header to outgoing messages,
# indicating which version of NeoMutt was used for composing them.
# 


# 3.464. virtual_spool_file
# 
# Type: boolean
# Default: no
# 
# This command is now unnecessary. $spool_file has been extended to support
# mailbox descriptions as a value.
# 
# When set, NeoMutt will use the first defined virtual mailbox (see
# virtual-mailboxes) as a spool file.
# 


# 3.465. wait_key
# 
# Type: boolean
# Default: yes
# 
# Controls whether NeoMutt will ask you to press a key after an external command
# has been invoked by these functions: <shell-escape>, <pipe-message>,
# <pipe-entry>, <print-message>, and <print-entry> commands.
# 
# It is also used when viewing attachments with "auto_view", provided that the
# corresponding mailcap entry has a needsterminal flag, and the external program
# is interactive.
# 
# When set, NeoMutt will always ask for a key. When unset, NeoMutt will wait for
# a key only if the external command returned a non-zero status.
# 
set wait_key=no


# 3.466. weed
# 
# Type: boolean
# Default: yes
# 
# When set, NeoMutt will weed headers when displaying, forwarding, or replying to
# messages. 
# 
# Also see $copy_decode_weed, $pipe_decode_weed, $print_decode_weed.
# 


# 3.467. wrap
# 
# Type: number
# Default: 0
# 
# When set to a positive value, NeoMutt will wrap text at $wrap characters. When
# set to a negative value, NeoMutt will wrap text so that there are $wrap
# characters of empty space on the right side of the terminal. Setting it to zero
# makes NeoMutt wrap at the terminal width.
# 
# Also see $reflow_wrap.
# 
set wrap=$reflow_wrap


# 3.468. wrap_headers
# 
# Type: number
# Default: 78
# 
# This option specifies the number of characters to use for wrapping an outgoing
# message's headers. Allowed values are between 78 and 998 inclusive.
# 
# Note: This option usually shouldn't be changed. RFC5233 recommends a line
# length of 78 (the default), so please only change this setting when you know
# what you're doing.
# 


# 3.469. wrap_search
# 
# Type: boolean
# Default: yes
# 
# Controls whether searches wrap around the end.
# 
# When set, searches will wrap around the first (or last) item. When unset,
# incremental searches will not wrap.
# 


# 3.470. write_bcc
# 
# Type: boolean
# Default: no
# 
# Controls whether NeoMutt writes out the "Bcc:" header when preparing messages
# to be sent. Some MTAs, such as Exim and Courier, do not strip the "Bcc:"
# header; so it is advisable to leave this unset unless you have a particular
# need for the header to be in the sent message.
# 
# If NeoMutt is set to deliver directly via SMTP(see $smtp_url), this option does
# nothing: NeoMutt will never write out the "Bcc:" header in this case.
# 
# Note this option only affects the sending of messages. Fcc'ed copies of a
# message will always contain the "Bcc:" header if one exists.
# 
# Note: On Debian systems, exim4 and postfix strip BCC headers by default. The
# above warning applies to exim3 users, see /etc/neomuttrc.
# 


# 3.471. write_inc
# 
# Type: number
# Default: 10
# 
# When writing a mailbox, a message will be printed every $write_inc messages to
# indicate progress. If set to 0, only a single message will be displayed before
# writing a mailbox.
# 
# Also see the $read_inc, $net_inc and $time_inc variables and the "tuning"
# section of the manual for performance considerations.
# 


# 3.472. x_comment_to
# 
# Type: boolean
# Default: no
# 
# If set, NeoMutt will add "X-Comment-To:" field (that contains full name of
# original article author) to article that followuped to newsgroup.
# 

# vim:sw=12:noet:sts=12:ts=12:ft=muttrc