### Disable Folding
-Add the following line to your `.vimrc` to disable the folding configuration:
+- `g:vim_markdown_folding_disabled`
-```vim
-let g:vim_markdown_folding_disabled = 1
-```
+ Add the following line to your `.vimrc` to disable the folding configuration:
-This option only controls Vim Markdown specific folding configuration.
+ let g:vim_markdown_folding_disabled = 1
-To enable/disable folding use Vim's standard folding configuration.
+ This option only controls Vim Markdown specific folding configuration.
-```vim
-set [no]foldenable
-```
+ To enable/disable folding use Vim's standard folding configuration.
+
+ set [no]foldenable
### Change fold style
-To fold in a style like [python-mode](https://github.com/klen/python-mode), add the following to your `.vimrc`:
+- `g:vim_markdown_folding_style_pythonic`
-```vim
-let g:vim_markdown_folding_style_pythonic = 1
-```
+ To fold in a style like [python-mode](https://github.com/klen/python-mode), add the following to your `.vimrc`:
-Level 1 heading which is served as a document title is not folded.
-`g:vim_markdown_folding_level` setting is not active with this fold style.
+ let g:vim_markdown_folding_style_pythonic = 1
-To prevent foldtext from being set add the following to your `.vimrc`:
+ Level 1 heading which is served as a document title is not folded.
+ `g:vim_markdown_folding_level` setting is not active with this fold style.
-```vim
-let g:vim_markdown_override_foldtext = 0
-```
+- `g:vim_markdown_override_foldtext`
+
+ To prevent foldtext from being set add the following to your `.vimrc`:
+
+ let g:vim_markdown_override_foldtext = 0
### Set header folding level
-Folding level is a number between 1 and 6. By default, if not specified, it is set to 1.
+- `g:vim_markdown_folding_level`
-```vim
-let g:vim_markdown_folding_level = 6
-```
+ Folding level is a number between 1 and 6. By default, if not specified, it is set to 1.
-Tip: it can be changed on the fly with:
+ let g:vim_markdown_folding_level = 6
-```vim
-:let g:vim_markdown_folding_level = 1
-:edit
-```
+ Tip: it can be changed on the fly with:
+
+ :let g:vim_markdown_folding_level = 1
+ :edit
### Disable Default Key Mappings
-Add the following line to your `.vimrc` to disable default key mappings:
+- `g:vim_markdown_no_default_key_mappings`
-```vim
-let g:vim_markdown_no_default_key_mappings = 1
-```
+ Add the following line to your `.vimrc` to disable default key mappings:
+
+ let g:vim_markdown_no_default_key_mappings = 1
-You can also map them by yourself with `<Plug>` mappings.
+
You can also map them by yourself with `<Plug>` mappings.
### Enable TOC window auto-fit
-Allow for the TOC window to auto-fit when it's possible for it to shrink.
-It never increases its default size (half screen), it only shrinks.
+- `g:vim_markdown_toc_autofit`
-```vim
-let g:vim_markdown_toc_autofit = 1
-```
+ Allow for the TOC window to auto-fit when it's possible for it to shrink.
+ It never increases its default size (half screen), it only shrinks.
+
+ let g:vim_markdown_toc_autofit = 1
### Text emphasis restriction to single-lines
-By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (i.e., for it to be applied a closing token must be found on the same line). To do so:
+- `g:vim_markdown_emphasis_multiline`
-```vim
-let g:vim_markdown_emphasis_multiline = 0
-```
+ By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (i.e., for it to be applied a closing token must be found on the same line). To do so:
+
+ let g:vim_markdown_emphasis_multiline = 0
### Syntax Concealing
-Concealing is set for some syntax.
+- `g:vim_markdown_conceal`
-For example, conceal `[link text](link url)` as just `link text`.
-Also, `_italic_` and `*italic*` will conceal to just _italic_.
-Similarly `__bold__`, `**bold**`, `___italic bold___`, and `***italic bold***`
-will conceal to just __bold__, **bold**, ___italic bold___, and ***italic bold*** respectively.
+ Concealing is set for some syntax.
-To enable conceal use Vim's standard conceal configuration.
+ For example, conceal `[link text](link url)` as just `link text`.
+ Also, `_italic_` and `*italic*` will conceal to just _italic_.
+ Similarly `__bold__`, `**bold**`, `___italic bold___`, and `***italic bold***`
+ will conceal to just __bold__, **bold**, ___italic bold___, and ***italic bold*** respectively.
-```vim
-set conceallevel=2
-```
+ To enable conceal use Vim's standard conceal configuration.
-To disable conceal regardless of `conceallevel` setting, add the following to your `.vimrc`:
+ set conceallevel=2
-```vim
-let g:vim_markdown_conceal = 0
-```
+ To disable conceal regardless of `conceallevel` setting, add the following to your `.vimrc`:
-To disable math conceal with LaTeX math syntax enabled, add the following to your `.vimrc`:
+ let g:vim_markdown_conceal = 0
-```vim
-let g:tex_conceal = ""
-let g:vim_markdown_math = 1
-```
+ To disable math conceal with LaTeX math syntax enabled, add the following to your `.vimrc`:
+
+ let g:tex_conceal = ""
+ let g:vim_markdown_math = 1
### Fenced code block languages
-You can use filetype name as fenced code block languages for syntax highlighting.
-If you want to use different name from filetype, you can add it in your `.vimrc` like so:
+- `g:vim_markdown_fenced_languages`
-```vim
-let g:vim_markdown_fenced_languages = ['csharp=cs']
-```
+ You can use filetype name as fenced code block languages for syntax highlighting.
+ If you want to use different name from filetype, you can add it in your `.vimrc` like so:
-This will cause the following to be highlighted using the `cs` filetype syntax.
+ let g:vim_markdown_fenced_languages = ['csharp=cs']
- ```csharp
- ...
- ```
+ This will cause the following to be highlighted using the `cs` filetype syntax.
-Default is `['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']`.
+ ```csharp
+ ...
+ ```
+
+ Default is `['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']`.
### Follow named anchors
-This feature allows the `ge` command to follow named anchors in links of the form
-`file#anchor` or just `#anchor`, where file may omit the `.md` extension as
-usual. Two variables control its operation:
+- `g:vim_markdown_follow_anchor`
-```vim
-let g:vim_markdown_follow_anchor = 1
-```
+ This feature allows the `ge` command to follow named anchors in links of the form
+ `file#anchor` or just `#anchor`, where file may omit the `.md` extension as
+ usual. Two variables control its operation:
-This tells vim-markdown whether to attempt to follow a named anchor in a link or
-not. When it is 1, and only if a link can be split in two parts by the pattern
-'#', then the first part is interpreted as the file and the second one as the
-named anchor. This also includes urls of the form `#anchor`, for which the first
-part is considered empty, meaning that the target file is the current one. After
-the file is opened, the anchor will be searched.
+ let g:vim_markdown_follow_anchor = 1
-Default is `0`.
+ This tells vim-markdown whether to attempt to follow a named anchor in a link or
+ not. When it is 1, and only if a link can be split in two parts by the pattern
+ '#', then the first part is interpreted as the file and the second one as the
+ named anchor. This also includes urls of the form `#anchor`, for which the first
+ part is considered empty, meaning that the target file is the current one. After
+ the file is opened, the anchor will be searched.
-```vim
-let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
-```
+ Default is `0`.
+
+- `g:vim_markdown_anchorexpr`
+
+ let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
-This expression will be evaluated substituting `v:anchor` with a quoted string
-that contains the anchor to visit. The result of the evaluation will become the
-real anchor to search in the target file. This is useful in order to convert
-anchors of the form, say, `my-section-title` to searches of the form `My Section
-Title` or `<<my-section-title>>`.
+ This expression will be evaluated substituting `v:anchor` with a quoted string
+ that contains the anchor to visit. The result of the evaluation will become the
+ real anchor to search in the target file. This is useful in order to convert
+ anchors of the form, say, `my-section-title` to searches of the form `My Section
+ Title` or `<<my-section-title>>`.
-Default is `''`.
+ Default is `''`.
### Syntax extensions
#### LaTeX math
-Used as `$x^2$`, `$$x^2$$`, escapable as `\$x\$` and `\$\$x\$\$`.
+- `g:vim_markdown_math`
-```vim
-let g:vim_markdown_math = 1
-```
+ Used as `$x^2$`, `$$x^2$$`, escapable as `\$x\$` and `\$\$x\$\$`.
+
+ let g:vim_markdown_math = 1
#### YAML Front Matter
-Highlight YAML front matter as used by Jekyll or [Hugo](https://gohugo.io/content/front-matter/).
+- `g:vim_markdown_frontmatter`
-```vim
-let g:vim_markdown_frontmatter = 1
-```
+ Highlight YAML front matter as used by Jekyll or [Hugo](https://gohugo.io/content/front-matter/).
+
+ let g:vim_markdown_frontmatter = 1
#### TOML Front Matter
-Highlight TOML front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
+- `g:vim_markdown_toml_frontmatter`
-TOML syntax highlight requires [vim-toml](https://github.com/cespare/vim-toml).
+ Highlight TOML front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
-```vim
-let g:vim_markdown_toml_frontmatter = 1
-```
+ TOML syntax highlight requires [vim-toml](https://github.com/cespare/vim-toml).
+
+ let g:vim_markdown_toml_frontmatter = 1
#### JSON Front Matter
-Highlight JSON front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
+- `g:vim_markdown_json_frontmatter`
-JSON syntax highlight requires [vim-json](https://github.com/elzr/vim-json).
+ Highlight JSON front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
-```vim
-let g:vim_markdown_json_frontmatter = 1
-```
+ JSON syntax highlight requires [vim-json](https://github.com/elzr/vim-json).
+
+ let g:vim_markdown_json_frontmatter = 1
#### Strikethrough
-Strikethrough uses two tildes. `~~Scratch this.~~`
+- `g:vim_markdown_strikethrough`
-```vim
-let g:vim_markdown_strikethrough = 1
-```
+ Strikethrough uses two tildes. `~~Scratch this.~~`
+
+ let g:vim_markdown_strikethrough = 1
### Adjust new list item indent
-You can adjust a new list indent. For example, you insert a single line like below:
+- `g:vim_markdown_new_list_item_indent`
-```
-* item1
-```
+ You can adjust a new list indent. For example, you insert a single line like below:
-Then if you type `o` to insert new line in vim and type `* item2`, the result will be:
+ * item1
-```
-* item1
- * item2
-```
+ Then if you type `o` to insert new line in vim and type `* item2`, the result will be:
-vim-markdown automatically insert the indent. By default, the number of spaces of indent is 4. If you'd like to change the number as 2, just write:
+ * item1
+ * item2
-```vim
-let g:vim_markdown_new_list_item_indent = 2
-```
+ vim-markdown automatically insert the indent. By default, the number of spaces of indent is 4. If you'd like to change the number as 2, just write:
+
+ let g:vim_markdown_new_list_item_indent = 2
### Do not require .md extensions for Markdown links
-If you want to have a link like this `[link text](link-url)` and follow it for editing in vim using the `ge` command, but have it open the file "link-url.md" instead of the file "link-url", then use this option:
+- `g:vim_markdown_no_extensions_in_markdown`
-```vim
-let g:vim_markdown_no_extensions_in_markdown = 1
-```
-This is super useful for GitLab and GitHub wiki repositories.
+ If you want to have a link like this `[link text](link-url)` and follow it for editing in vim using the `ge` command, but have it open the file "link-url.md" instead of the file "link-url", then use this option:
+
+ let g:vim_markdown_no_extensions_in_markdown = 1
-Normal behaviour would be that vim-markup required you to do this `[link text](link-url.md)`, but this is not how the Gitlab and GitHub wiki repositories work. So this option adds some consistency between the two.
+ This is super useful for GitLab and GitHub wiki repositories.
+
+ Normal behaviour would be that vim-markup required you to do this `[link text](link-url.md)`, but this is not how the Gitlab and GitHub wiki repositories work. So this option adds some consistency between the two.
### Auto-write when following link
-If you follow a link like this `[link text](link-url)` using the `ge` shortcut, this option will automatically save any edits you made before moving you:
+- `g:vim_markdown_autowrite`
-```vim
-let g:vim_markdown_autowrite = 1
-```
+ If you follow a link like this `[link text](link-url)` using the `ge` shortcut, this option will automatically save any edits you made before moving you:
+
+ let g:vim_markdown_autowrite = 1
### Change default file extension
-If you would like to use a file extension other than `.md` you may do so using the `vim_markdown_auto_extension_ext` variable:
+- `g:vim_markdown_auto_extension_ext`
-```vim
-let g:vim_markdown_auto_extension_ext = 'txt'
-```
+ If you would like to use a file extension other than `.md` you may do so using the `vim_markdown_auto_extension_ext` variable:
+
+ let g:vim_markdown_auto_extension_ext = 'txt'
### Do not automatically insert bulletpoints
-Automatically inserting bulletpoints can lead to problems when wrapping text
-(see issue #232 for details), so it can be disabled:
+- `g:vim_markdown_auto_insert_bullets`
-```vim
-let g:vim_markdown_auto_insert_bullets = 0
-```
+ Automatically inserting bulletpoints can lead to problems when wrapping text
+ (see issue #232 for details), so it can be disabled:
-In that case, you probably also want to set the new list item indent to 0 as
-well, or you will have to remove an indent each time you add a new list item:
+ let g:vim_markdown_auto_insert_bullets = 0
-```vim
-let g:vim_markdown_new_list_item_indent = 0
-```
+ In that case, you probably also want to set the new list item indent to 0 as
+ well, or you will have to remove an indent each time you add a new list item:
+
+ let g:vim_markdown_new_list_item_indent = 0
### Change how to open new files
-By default when following a link the target file will be opened in your current buffer. This behavior can change if you prefer using splits or tabs by using the `vim_markdown_edit_url_in` variable. Possible values are `tab`, `vsplit`, `hsplit`, `current` opening in a new tab, vertical split, horizontal split, and current buffer respectively. Defaults to current buffer if not set:
+- `g:vim_markdown_edit_url_in`
-```vim
-let g:vim_markdown_edit_url_in = 'tab'
-```
+ By default when following a link the target file will be opened in your current buffer. This behavior can change if you prefer using splits or tabs by using the `vim_markdown_edit_url_in` variable. Possible values are `tab`, `vsplit`, `hsplit`, `current` opening in a new tab, vertical split, horizontal split, and current buffer respectively. Defaults to current buffer if not set:
+
+ let g:vim_markdown_edit_url_in = 'tab'
## Mappings
*vim-markdown-installation*
Installation ~
-If you use Vundle [2], add the following line to your '~/.vimrc':
+If you use Vundle [2], add the following lines to your '~/.vimrc':
>
Plugin 'godlygeek/tabular'
Plugin 'plasticboy/vim-markdown'
-------------------------------------------------------------------------------
*vim-markdown-disable-folding*
- *g:vim_markdown_folding_disabled*
Disable Folding ~
-Add the following line to your '.vimrc' to disable the folding configuration:
+ *g:vim_markdown_folding_disabled*
+- 'g:vim_markdown_folding_disabled'
+
+ Add the following line to your '.vimrc' to disable the folding
+ configuration:
>
let g:vim_markdown_folding_disabled = 1
<
-This option only controls Vim Markdown specific folding configuration.
+ This option only controls Vim Markdown specific folding configuration.
-To enable/disable folding use Vim's standard folding configuration.
+ To enable/disable folding use Vim's standard folding configuration.
>
set [no]foldenable
<
-------------------------------------------------------------------------------
*vim-markdown-change-fold-style*
- *g:vim_markdown_folding_style_pythonic*
- *g:vim_markdown_override_foldtext*
Change fold style ~
-To fold in a style like python-mode [6], add the following to your '.vimrc':
+ *g:vim_markdown_folding_style_pythonic*
+- 'g:vim_markdown_folding_style_pythonic'
+
+ To fold in a style like python-mode [6], add the following to your
+ '.vimrc':
>
let g:vim_markdown_folding_style_pythonic = 1
<
-Level 1 heading which is served as a document title is not folded.
-'g:vim_markdown_folding_level' setting is not active with this fold style.
+ Level 1 heading which is served as a document title is not folded.
+ 'g:vim_markdown_folding_level' setting is not active with this fold style.
+
+ *g:vim_markdown_override_foldtext*
+- 'g:vim_markdown_override_foldtext'
-To prevent foldtext from being set add the following to your '.vimrc':
+ To prevent foldtext from being set add the following to your '.vimrc':
>
let g:vim_markdown_override_foldtext = 0
<
-------------------------------------------------------------------------------
*vim-markdown-set-header-folding-level*
- *g:vim_markdown_folding_level*
Set header folding level ~
-Folding level is a number between 1 and 6. By default, if not specified, it is
-set to 1.
+ *g:vim_markdown_folding_level*
+- 'g:vim_markdown_folding_level'
+
+ Folding level is a number between 1 and 6. By default, if not specified, it
+ is set to 1.
>
let g:vim_markdown_folding_level = 6
<
-Tip: it can be changed on the fly with:
+ Tip: it can be changed on the fly with:
>
:let g:vim_markdown_folding_level = 1
:edit
<
-------------------------------------------------------------------------------
*vim-markdown-disable-default-key-mappings*
- *g:vim_markdown_no_default_key_mappings*
Disable Default Key Mappings ~
-Add the following line to your '.vimrc' to disable default key mappings:
+ *g:vim_markdown_no_default_key_mappings*
+- 'g:vim_markdown_no_default_key_mappings'
+
+ Add the following line to your '.vimrc' to disable default key mappings:
>
let g:vim_markdown_no_default_key_mappings = 1
<
-You can also map them by yourself with '<Plug>' mappings.
+
You can also map them by yourself with '<Plug>' mappings.
-------------------------------------------------------------------------------
*vim-markdown-enable-toc-window-auto-fit*
- *g:vim_markdown_toc_autofit*
Enable TOC window auto-fit ~
-Allow for the TOC window to auto-fit when it's possible for it to shrink. It
-never increases its default size (half screen), it only shrinks.
+ *g:vim_markdown_toc_autofit*
+- 'g:vim_markdown_toc_autofit'
+
+ Allow for the TOC window to auto-fit when it's possible for it to shrink.
+ It never increases its default size (half screen), it only shrinks.
>
let g:vim_markdown_toc_autofit = 1
<
-------------------------------------------------------------------------------
*vim-markdown-text-emphasis-restriction-to-single-lines*
- *g:vim_markdown_emphasis_multiline*
Text emphasis restriction to single-lines ~
-By default text emphasis works across multiple lines until a closing token is
-found. However, it's possible to restrict text emphasis to a single line (i.e.,
-for it to be applied a closing token must be found on the same line). To do so:
+ *g:vim_markdown_emphasis_multiline*
+- 'g:vim_markdown_emphasis_multiline'
+
+ By default text emphasis works across multiple lines until a closing token
+ is found. However, it's possible to restrict text emphasis to a single line
+ (i.e., for it to be applied a closing token must be found on the same
+ line). To do so:
>
let g:vim_markdown_emphasis_multiline = 0
<
-------------------------------------------------------------------------------
*vim-markdown-syntax-concealing*
- *g:vim_markdown_conceal*
Syntax Concealing ~
-Concealing is set for some syntax.
+ *g:vim_markdown_conceal*
+- 'g:vim_markdown_conceal'
+
+ Concealing is set for some syntax.
-For example, conceal '[link text](link url)' as just 'link text'. Also,
-'_italic_' and '*italic*' will conceal to just _italic_. Similarly '__bold__',
-'**bold**', '___italic bold___', and '***italic bold***' will conceal to just
-**bold**, **bold**, **_italic bold_**, and **_italic bold_** respectively.
+ For example, conceal '[link text](link url)' as just 'link text'. Also,
+ '_italic_' and '*italic*' will conceal to just _italic_. Similarly
+ '__bold__', '**bold**', '___italic bold___', and '***italic bold***' will
+ conceal to just **bold**, **bold**, **_italic bold_**, and **_italic
+ bold_** respectively.
-To enable conceal use Vim's standard conceal configuration.
+ To enable conceal use Vim's standard conceal configuration.
>
set conceallevel=2
<
-To disable conceal regardless of 'conceallevel' setting, add the following to
-your '.vimrc':
+ To disable conceal regardless of 'conceallevel' setting, add the following
+ to your '.vimrc':
>
let g:vim_markdown_conceal = 0
<
-To disable math conceal with LaTeX math syntax enabled, add the following to
-your '.vimrc':
+ To disable math conceal with LaTeX math syntax enabled, add the following
+ to your '.vimrc':
>
let g:tex_conceal = ""
let g:vim_markdown_math = 1
<
-------------------------------------------------------------------------------
*vim-markdown-fenced-code-block-languages*
- *g:vim_markdown_fenced_languages*
Fenced code block languages ~
-You can use filetype name as fenced code block languages for syntax
-highlighting. If you want to use different name from filetype, you can add it
-in your '.vimrc' like so:
+ *g:vim_markdown_fenced_languages*
+- 'g:vim_markdown_fenced_languages'
+
+ You can use filetype name as fenced code block languages for syntax
+ highlighting. If you want to use different name from filetype, you can add
+ it in your '.vimrc' like so:
>
let g:vim_markdown_fenced_languages = ['csharp=cs']
<
-This will cause the following to be highlighted using the 'cs' filetype syntax.
+ This will cause the following to be highlighted using the 'cs' filetype
+ syntax.
>
```csharp
...
```
<
-Default is "['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']".
+ Default is "['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']".
-------------------------------------------------------------------------------
*vim-markdown-follow-named-anchors*
- *g:vim_markdown_follow_anchor*
- *g:vim_markdown_anchorexpr*
Follow named anchors ~
-This feature allows the 'ge' command to follow named anchors in links of the
-form 'file#anchor' or just '#anchor', where file may omit the '.md' extension
-as usual. Two variables control its operation:
+ *g:vim_markdown_follow_anchor*
+- 'g:vim_markdown_follow_anchor'
+
+ This feature allows the 'ge' command to follow named anchors in links of
+ the form 'file#anchor' or just '#anchor', where file may omit the '.md'
+ extension as usual. Two variables control its operation:
>
let g:vim_markdown_follow_anchor = 1
<
-This tells vim-markdown whether to attempt to follow a named anchor in a link
-or not. When it is 1, and only if a link can be split in two parts by the
-pattern '#', then the first part is interpreted as the file and the second one
-as the named anchor. This also includes urls of the form '#anchor', for which
-the first part is considered empty, meaning that the target file is the current
-one. After the file is opened, the anchor will be searched.
+ This tells vim-markdown whether to attempt to follow a named anchor in a
+ link or not. When it is 1, and only if a link can be split in two parts by
+ the pattern '#', then the first part is interpreted as the file and the
+ second one as the named anchor. This also includes urls of the form
+ '#anchor', for which the first part is considered empty, meaning that the
+ target file is the current one. After the file is opened, the anchor will
+ be searched.
-Default is '0'.
+ Default is '0'.
+
+ *g:vim_markdown_anchorexpr*
+- 'g:vim_markdown_anchorexpr'
>
let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
<
-This expression will be evaluated substituting 'v:anchor' with a quoted string
-that contains the anchor to visit. The result of the evaluation will become the
-real anchor to search in the target file. This is useful in order to convert
-anchors of the form, say, 'my-section-title' to searches of the form 'My
-Section Title' or '<<my-section-title>>'.
+ This expression will be evaluated substituting 'v:anchor' with a quoted
+ string that contains the anchor to visit. The result of the evaluation will
+ become the real anchor to search in the target file. This is useful in
+ order to convert anchors of the form, say, 'my-section-title' to searches
+ of the form 'My Section Title' or '<<my-section-title>>'.
-Default is "''".
+ Default is "''".
-------------------------------------------------------------------------------
*vim-markdown-syntax-extensions*
-------------------------------------------------------------------------------
*vim-markdown-latex-math*
- *g:vim_markdown_math*
LaTeX math ~
-Used as '$x^2$', '$$x^2$$', escapable as '\$x\$' and '\$\$x\$\$'.
+ *g:vim_markdown_math*
+- 'g:vim_markdown_math'
+
+ Used as '$x^2$', '$$x^2$$', escapable as '\$x\$' and '\$\$x\$\$'.
>
let g:vim_markdown_math = 1
<
-------------------------------------------------------------------------------
*vim-markdown-yaml-front-matter*
- *g:vim_markdown_frontmatter*
YAML Front Matter ~
-Highlight YAML front matter as used by Jekyll or Hugo [7].
+ *g:vim_markdown_frontmatter*
+- 'g:vim_markdown_frontmatter'
+
+ Highlight YAML front matter as used by Jekyll or Hugo [7].
>
let g:vim_markdown_frontmatter = 1
<
-------------------------------------------------------------------------------
*vim-markdown-toml-front-matter*
- *g:vim_markdown_toml_frontmatter*
TOML Front Matter ~
-Highlight TOML front matter as used by Hugo [7].
+ *g:vim_markdown_toml_frontmatter*
+- 'g:vim_markdown_toml_frontmatter'
+
+ Highlight TOML front matter as used by Hugo [7].
-TOML syntax highlight requires vim-toml [8].
+ TOML syntax highlight requires vim-toml [8].
>
let g:vim_markdown_toml_frontmatter = 1
<
-------------------------------------------------------------------------------
*vim-markdown-json-front-matter*
- *g:vim_markdown_json_frontmatter*
JSON Front Matter ~
-Highlight JSON front matter as used by Hugo [7].
+ *g:vim_markdown_json_frontmatter*
+- 'g:vim_markdown_json_frontmatter'
+
+ Highlight JSON front matter as used by Hugo [7].
-JSON syntax highlight requires vim-json [9].
+ JSON syntax highlight requires vim-json [9].
>
let g:vim_markdown_json_frontmatter = 1
<
-------------------------------------------------------------------------------
*vim-markdown-strikethrough*
- *g:vim_markdown_strikethrough*
Strikethrough ~
-Strikethrough uses two tildes. '~~Scratch this.~~'
+ *g:vim_markdown_strikethrough*
+- 'g:vim_markdown_strikethrough'
+
+ Strikethrough uses two tildes. '~~Scratch this.~~'
>
let g:vim_markdown_strikethrough = 1
<
-------------------------------------------------------------------------------
*vim-markdown-adjust-new-list-item-indent*
- *g:vim_markdown_new_list_item_indent*
Adjust new list item indent ~
-You can adjust a new list indent. For example, you insert a single line like
-below:
+ *g:vim_markdown_new_list_item_indent*
+- 'g:vim_markdown_new_list_item_indent'
+
+ You can adjust a new list indent. For example, you insert a single line
+ like below:
>
* item1
<
-Then if you type 'o' to insert new line in vim and type '* item2', the result
-will be:
+ Then if you type 'o' to insert new line in vim and type '* item2', the
+ result will be:
>
* item1
* item2
<
-vim-markdown automatically insert the indent. By default, the number of spaces
-of indent is 4. If you'd like to change the number as 2, just write:
+ vim-markdown automatically insert the indent. By default, the number of
+ spaces of indent is 4. If you'd like to change the number as 2, just write:
>
let g:vim_markdown_new_list_item_indent = 2
<
-------------------------------------------------------------------------------
*vim-markdown-do-not-require-.md-extensions-for-markdown-links*
- *g:vim_markdown_no_extensions_in_markdown*
Do not require .md extensions for Markdown links ~
-If you want to have a link like this '[link text](link-url)' and follow it for
-editing in vim using the 'ge' command, but have it open the file "link-url.md"
-instead of the file "link-url", then use this option:
+ *g:vim_markdown_no_extensions_in_markdown*
+- 'g:vim_markdown_no_extensions_in_markdown'
+
+ If you want to have a link like this '[link text](link-url)' and follow it
+ for editing in vim using the 'ge' command, but have it open the file "link-
+ url.md" instead of the file "link-url", then use this option:
>
let g:vim_markdown_no_extensions_in_markdown = 1
<
-This is super useful for GitLab and GitHub wiki repositories.
+ This is super useful for GitLab and GitHub wiki repositories.
-Normal behaviour would be that vim-markup required you to do this '[link text
-](link-url.md)', but this is not how the Gitlab and GitHub wiki repositories
-work. So this option adds some consistency between the two.
+ Normal behaviour would be that vim-markup required you to do this '[link
+ text](link-url.md)', but this is not how the Gitlab and GitHub wiki
+ repositories work. So this option adds some consistency between the two.
-------------------------------------------------------------------------------
*vim-markdown-auto-write-when-following-link*
- *g:vim_markdown_autowrite*
Auto-write when following link ~
-If you follow a link like this '[link text](link-url)' using the 'ge' shortcut,
-this option will automatically save any edits you made before moving you:
+ *g:vim_markdown_autowrite*
+- 'g:vim_markdown_autowrite'
+
+ If you follow a link like this '[link text](link-url)' using the 'ge'
+ shortcut, this option will automatically save any edits you made before
+ moving you:
>
let g:vim_markdown_autowrite = 1
<
-------------------------------------------------------------------------------
*vim-markdown-change-default-file-extension*
- *g:vim_markdown_auto_extension_ext*
Change default file extension ~
-If you would like to use a file extension other than '.md' you may do so using
-the 'vim_markdown_auto_extension_ext' variable:
+ *g:vim_markdown_auto_extension_ext*
+- 'g:vim_markdown_auto_extension_ext'
+
+ If you would like to use a file extension other than '.md' you may do so
+ using the 'vim_markdown_auto_extension_ext' variable:
>
let g:vim_markdown_auto_extension_ext = 'txt'
<
-------------------------------------------------------------------------------
*vim-markdown-do-not-automatically-insert-bulletpoints*
- *g:vim_markdown_auto_insert_bullets*
Do not automatically insert bulletpoints ~
-Automatically inserting bulletpoints can lead to problems when wrapping text
-(see issue #232 for details), so it can be disabled:
+ *g:vim_markdown_auto_insert_bullets*
+- 'g:vim_markdown_auto_insert_bullets'
+
+ Automatically inserting bulletpoints can lead to problems when wrapping
+ text (see issue #232 for details), so it can be disabled:
>
let g:vim_markdown_auto_insert_bullets = 0
<
-In that case, you probably also want to set the new list item indent to 0 as
-well, or you will have to remove an indent each time you add a new list item:
+ In that case, you probably also want to set the new list item indent to 0
+ as well, or you will have to remove an indent each time you add a new list
+ item:
>
let g:vim_markdown_new_list_item_indent = 0
<
-------------------------------------------------------------------------------
*vim-markdown-change-how-to-open-new-files*
- *g:vim_markdown_edit_url_in*
Change how to open new files ~
-By default when following a link the target file will be opened in your current
-buffer. This behavior can change if you prefer using splits or tabs by using
-the 'vim_markdown_edit_url_in' variable. Possible values are 'tab', 'vsplit',
-'hsplit', 'current' opening in a new tab, vertical split, horizontal split, and
-current buffer respectively. Defaults to current buffer if not set:
+ *g:vim_markdown_edit_url_in*
+- 'g:vim_markdown_edit_url_in'
+
+ By default when following a link the target file will be opened in your
+ current buffer. This behavior can change if you prefer using splits or tabs
+ by using the 'vim_markdown_edit_url_in' variable. Possible values are
+ 'tab', 'vsplit', 'hsplit', 'current' opening in a new tab, vertical split,
+ horizontal split, and current buffer respectively. Defaults to current
+ buffer if not set:
>
let g:vim_markdown_edit_url_in = 'tab'
<
projects / etc / vim.git / commitdiff