B<mr> [options] log
+B<mr> [options] register [repository]
+
+B<mr> [options] config section [parameter=[value] ...]
+
B<mr> [options] action [params ...]
=head1 DESCRIPTION
List the repositories that mr will act on.
+=item register
+
+Register an existing repository in the mrconfig file. By default, the
+epository in the current directory is registered, or you can specify a
+directory to register.
+
+=item config
+
+Adds, modifies, removed, or prints a value from the mrconfig file. The next
+parameter is the name of the section the value is in. To add or modify a
+value, follow it by one or more instances of "parameter=value". Use
+"parameter=" to remove a parameter. Use just "parameter" to get the value
+of a parameter.
+
+For example, to add (or edit) a repository in src/foo:
+
+ mr config src/foo checkout="svn co svn://example.com/foo/trunk foo"
+
=item help
Displays this help.
"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr
update"
-Additional parameters can be passed to other commands than "commit", they
-will be passed on unchanged to the underlying revision control system.
-This is mostly useful if the repositories mr will act on all use the same
-revision control system.
+Additional parameters can be passed to most commands, and are passed on
+unchanged to the underlying revision control system. This is mostly useful
+if the repositories mr will act on all use the same revision control
+system.
=head1 OPTIONS
=head1 FILES
B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
-file in your home directory. Each repository specified in a .mrconfig file
-can also have its own .mrconfig file in its root directory that can
-optionally be used as well. So you could have a ~/.mrconfig that registers a
-repository ~/src, that itself contains a ~/src/.mrconfig file, that in turn
-registers several additional repositories.
+file in your home directory, and this can in turn chain load .mrconfig files
+from repositories.
+
+Here is an example .mrconfig file:
+
+ [src]
+ checkout = svn co svn://svn.example.com/src/trunk src
+ chain = true
+
+ [src/linux-2.6]
+ checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
The .mrconfig file uses a variant of the INI file format. Lines starting with
"#" are comments. Lines ending with "\" are continued on to the next line.
-Sections specify where each repository is located, relative to the
-directory that contains the .mrconfig file.
+
+The "DEFAULT" section allows setting default values for the sections that
+come after it.
+
+The "ALIAS" section allows adding aliases for actions. Each parameter
+is an alias, and its value is the action to use.
+
+All other sections add repositories. The section header specifies the
+directory where the repository is located. This is relative to the directory
+that contains the mrconfig file, but you can also choose to use absolute
+paths.
Within a section, each parameter defines a shell command to run to handle a
-given action. Note that these shell commands are run in a "set -e" shell
+given action. mr contains default handlers for the "update", "status", and
+"commit" actions, so normally you only need to specify what to do for
+"checkout".
+
+Note that these shell commands are run in a "set -e" shell
environment, where any additional parameters you pass are available in
"$@". The "checkout" command is run in the parent of the repository
directory, since the repository isn't checked out yet. All other commands
The "MR_REPO" environment variable is set to the path to the top of the
repository.
-There are three special parameters. If the "skip" parameter is set and
-its command returns nonzero, then B<mr> will skip acting on that repository.
+A few parameters have special meanings:
+
+=over 4
+
+=item skip
+
+If the "skip" parameter is set and its command returns nonzero, then B<mr>
+will skip acting on that repository.
+
+=item chain
+
If the "chain" parameter is set and its command returns nonzero, then B<mr>
will try to load a .mrconfig file from the root of the repository. (You
-should avoid chaining from repositories with untrusted committers.) The
-"lib" parameter can specify some shell code that will be run before each
-command, this can be a useful way to define shell functions for other commands
-to use.
+should avoid chaining from repositories with untrusted committers.)
-The "default" section allows setting up default handlers for each action,
-and is overridden by the contents of other sections. mr contains default
-handlers for the "update", "status", and "commit" actions, so normally
-you only need to specify what to do for "checkout".
+=item deleted
-The "alias" section allows adding aliases for actions. Each parameter
-is an alias, and its value is the action to use.
+If the "deleted" parameter is set and its command returns nonzero, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repsoitory's directory.
+This is useful when one mrconfig file is shared amoung multiple machines,
+to keep track of and remember to delete old repositories.
-For example:
+=item lib
- [src]
- checkout = svn co svn://svn.example.com/src/trunk src
- chain = true
-
- [src/linux-2.6]
- skip = small
- checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+The "lib" parameter can specify some shell code that will be run before each
+command, this can be a useful way to define shell functions for other commands
+to use.
- [default]
- lib = \
- small() {
- case "$(hostname)" in; \
- slug|snail); \
- return 0; ;; ; \
- esac; \
- return 1; \
- }
+=back
=head1 AUTHOR
Getopt::Long::Configure("no_permute");
my $result=GetOptions(
- "d=s" => sub { $directory=abs_path($_[1]) },
- "c=s" => \$config,
- "v" => \$verbose,
+ "d|directory=s" => sub { $directory=abs_path($_[1]) },
+ "c|config=s" => \$config,
+ "verbose" => \$verbose,
);
if (! $result || @ARGV < 1) {
die("Usage: mr [-d directory] action [params ...]\n".
# alias expansion and command stemming
my $action=shift @ARGV;
+if (exists $alias{$action}) {
+ $action=$alias{$action};
+}
if (! exists $knownactions{$action}) {
- if (exists $alias{$action}) {
- $action=$alias{$action};
+ my @matches = grep { /^\Q$action\E/ }
+ keys %knownactions, keys %alias;
+ if (@matches == 1) {
+ $action=$matches[0];
+ }
+ elsif (@matches == 0) {
+ die "mr: unknown action \"$action\" (known actions: ".
+ join(", ", sort keys %knownactions).")\n";
}
else {
- my @matches = grep { /^\Q$action\E/ }
- keys %knownactions, keys %alias;
- if (@matches == 1) {
- $action=$matches[0];
+ die "mr: ambiguous action \"$action\" (matches: ".
+ join(", ", @matches).")\n";
+ }
+}
+
+if ($action eq 'help') {
+ exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
+}
+elsif ($action eq 'config') {
+ if (@ARGV < 2) {
+ die "mr config: not enough parameters\n";
+ }
+ my $section=shift;
+ if ($section=~/^\//) {
+ # try to convert to a path relative to $config's dir
+ my ($dir)=$config=~/^(.*\/)[^\/]+$/;
+ if ($section=~/^\Q$dir\E(.*)/) {
+ $section=$1;
}
- elsif (@matches == 0) {
- die "mr: unknown action \"$action\" (known actions: ".
- join(", ", sort keys %knownactions).")\n";
+ }
+ my %changefields;
+ foreach (@ARGV) {
+ if (/^([^=]+)=(.*)$/) {
+ $changefields{$1}=$2;
}
else {
- die "mr: ambiguous action \"$action\" (matches: ".
- join(", ", @matches).")\n";
+ foreach my $topdir (sort keys %config) {
+ if (exists $config{$topdir}{$section} &&
+ exists $config{$topdir}{$section}{$_}) {
+ print $config{$topdir}{$section}{$_}."\n";
+ }
+ }
}
}
+ modifyconfig($config, $section, %changefields) if %changefields;
+ exit 0;
}
-
-if ($action eq 'help') {
- exec($config{''}{default}{help});
+elsif ($action eq 'register') {
+ my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
+ "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print STDERR "mr $action: running >>$command<<\n" if $verbose;
+ exec($command) || die "exec: $!";
}
# work out what repos to act on
my $nochdir=0;
foreach my $topdir (sort keys %config) {
foreach my $subdir (sort keys %{$config{$topdir}}) {
- next if $subdir eq 'default';
- my $dir=$topdir.$subdir;
- next if $dir ne $directory && $dir !~ /^\Q$directory\E\//;
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ next if $dir ne $directory && $dir !~ /^\Q$directory\E/;
push @repos, [$dir, $topdir, $subdir];
}
}
# fallback to find a leaf repo
LEAF: foreach my $topdir (reverse sort keys %config) {
foreach my $subdir (reverse sort keys %{$config{$topdir}}) {
- next if $subdir eq 'default';
- my $dir=$topdir.$subdir;
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
my ($action, $dir, $topdir, $subdir) = @_;
my $lib= exists $config{$topdir}{$subdir}{lib} ?
- $config{$topdir}{$subdir}{lib} : "";
+ $config{$topdir}{$subdir}{lib}."\n" : "";
+
+ if (exists $config{$topdir}{$subdir}{deleted}) {
+ if (! -d $dir) {
+ return;
+ }
+ else {
+ my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
+ print "mr $action: running deleted test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret >> 8 == 0) {
+ print STDERR "mr error: $dir should be deleted yet still exists\n\n";
+ push @failed, $dir;
+ return;
+ }
+ }
+ }
if ($action eq 'checkout') {
if (-d $dir) {
}
$ENV{MR_REPO}=$dir;
- if (! $nochdir && ! chdir($dir)) {
- print STDERR "mr $action: failed to chdir to $dir: $!\n";
- push @skipped, $dir;
- }
if (exists $config{$topdir}{$subdir}{skip}) {
- my $ret=system($lib.$config{$topdir}{$subdir}{skip});
+ my $test="set -e;".$lib.$config{$topdir}{$subdir}{skip};
+ print "mr $action: running skip test >>$test<<\n" if $verbose;
+ my $ret=system($test);
if ($ret >> 8 == 0) {
print "mr $action: $dir skipped per config file\n" if $verbose;
push @skipped, $dir;
return;
}
}
-
- if (! exists $config{$topdir}{$subdir}{$action}) {
+
+ if (! $nochdir && ! chdir($dir)) {
+ print STDERR "mr $action: failed to chdir to $dir: $!\n";
+ push @failed, $dir;
+ }
+ elsif (! exists $config{$topdir}{$subdir}{$action}) {
print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
push @skipped, $dir;
}
else {
if (! $nochdir) {
- print "mr $action: $dir\n";
+ print "mr $action: $topdir$subdir\n";
}
else {
- print "mr $action: $dir (in subdir $directory)\n";
+ print "mr $action: $topdir$subdir (in subdir $directory)\n";
}
my $command="set -e; ".$lib.
- "my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
+ "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ".
join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print STDERR "mr $action: running $command\n" if $verbose;
+ print STDERR "mr $action: running >>$command<<\n" if $verbose;
my $ret=system($command);
if ($ret != 0) {
print STDERR "mr $action: failed ($ret)\n" if $verbose;
- push @failed, $topdir.$subdir;
+ push @failed, $dir;
if ($ret >> 8 != 0) {
print STDERR "mr $action: command failed\n";
}
$dir="";
}
else {
- # $f might be a symlink
+ if (! -e $f) {
+ return;
+ }
+
my $absf=abs_path($f);
if ($loaded{$absf}) {
return;
my $parent=$dir;
while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
if (exists $config{$parent} &&
- exists $config{$parent}{default}) {
- $config{$dir}{default}={ %{$config{$parent}{default}} };
+ exists $config{$parent}{DEFAULT}) {
+ $config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };
last;
}
}
my $value=$2;
# continuation line
- while ($value=~/(.*)\\$/) {
- $value=$1.<$in>;
+ while ($value=~/(.*)\\$/s) {
+ $value=$1."\n".<$in>;
chomp $value;
}
if (! defined $section) {
die "$f line $.: parameter ($parameter) not in section\n";
}
- if ($section ne 'alias' &&
+ if ($section ne 'ALIAS' &&
! exists $config{$dir}{$section} &&
- exists $config{$dir}{default}) {
+ exists $config{$dir}{DEFAULT}) {
# copy in defaults
- $config{$dir}{$section}={ %{$config{$dir}{default}} };
+ $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
}
- if ($section eq 'alias') {
+ if ($section eq 'ALIAS') {
$alias{$parameter}=$value;
}
elsif ($parameter eq 'lib') {
- $config{$dir}{$section}{lib}.=$value." ; ";
+ $config{$dir}{$section}{lib}.=$value."\n";
}
else {
$config{$dir}{$section}{$parameter}=$value;
$knownactions{$parameter}=1;
if ($parameter eq 'chain' &&
- length $dir && $section ne "default" &&
+ length $dir && $section ne "DEFAULT" &&
-e $dir.$section."/.mrconfig" &&
system($value) >> 8 == 0) {
push @toload, $dir.$section."/.mrconfig";
}
}
+sub modifyconfig {
+ my $f=shift;
+ # the section to modify or add
+ my $targetsection=shift;
+ # fields to change in the section
+ # To remove a field, set its value to "".
+ my %changefields=@_;
+
+ my @lines;
+ my @out;
+
+ if (-e $f) {
+ open(my $in, "<", $f) || die "mr: open $f: $!\n";
+ @lines=<$in>;
+ close $in;
+ }
+
+ my $addfields=sub {
+ my @blanks;
+ while ($out[$#out] =~ /^\s*$/) {
+ unshift @blanks, pop @out;
+ }
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, "$field = $changefields{$field}\n";
+ }
+ }
+ push @out, @blanks;
+ };
+
+ my $section;
+ while (@lines) {
+ $_=shift(@lines);
+
+ if (/^\s*\#/ || /^\s*$/) {
+ push @out, $_;
+ }
+ elsif (/^\s*\[([^\]]*)\]\s*$/) {
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+
+ $section=$1;
+
+ push @out, $_;
+ }
+ elsif (/^\s*(\w+)\s*=\s(.*)/) {
+ my $parameter=$1;
+ my $value=$2;
+
+ # continuation line
+ while ($value=~/(.*\\)$/s) {
+ $value=$1."\n".shift(@lines);
+ chomp $value;
+ }
+
+ if ($section eq $targetsection) {
+ if (exists $changefields{$parameter}) {
+ if (length $changefields{$parameter}) {
+ $value=$changefields{$parameter};
+ }
+ delete $changefields{$parameter};
+ }
+ }
+
+ push @out, "$parameter = $value\n";
+ }
+ }
+
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+ elsif (%changefields) {
+ push @out, "\n[$targetsection]\n";
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, "$field = $changefields{$field}\n";
+ }
+ }
+ }
+
+ open(my $out, ">", $f) || die "mr: write $f: $!\n";
+ print $out @out;
+ close $out;
+}
+
# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
__DATA__
-[alias]
+[ALIAS]
co = checkout
ci = commit
ls = list
-[default]
-lib = \
- error() { \
- echo "mr: $@" >&2; \
- exit 1; \
+
+[DEFAULT]
+lib = \
+ error() { \
+ echo "mr: $@" >&2 \
+ exit 1 \
}
-update = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn update "$@"; \
- elif [ -d "$MR_REPO"/.git ]; then \
- git pull origin master "$@"; \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs update "$@"; \
- else \
- error "unknown repo type"; \
+
+update = \
+ if [ -d "$MR_REPO"/.svn ]; then \
+ svn update "$@" \
+ elif [ -d "$MR_REPO"/.git ]; then \
+ git pull origin master "$@" \
+ elif [ -d "$MR_REPO"/.bzr ]; then \
+ bzr merge "$@" \
+ elif [ -d "$MR_REPO"/CVS ]; then \
+ cvs update "$@" \
+ else \
+ error "unknown repo type" \
+ fi
+status = \
+ if [ -d "$MR_REPO"/.svn ]; then \
+ svn status "$@" \
+ elif [ -d "$MR_REPO"/.git ]; then \
+ git status "$@" || true \
+ elif [ -d "$MR_REPO"/.bzr ]; then \
+ bzr status "$@" \
+ elif [ -d "$MR_REPO"/CVS ]; then \
+ cvs status "$@" \
+ else \
+ error "unknown repo type" \
fi
-status = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn status "$@"; \
- elif [ -d "$MR_REPO"/.git ]; then \
- git status "$@" || true; \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs status "$@"; \
- else \
- error "unknown repo type"; \
+commit = \
+ if [ -d "$MR_REPO"/.svn ]; then \
+ svn commit "$@" \
+ elif [ -d "$MR_REPO"/.git ]; then \
+ git commit -a "$@" && git push --all \
+ elif [ -d "$MR_REPO"/.bzr ]; then \
+ bzr commit "$@" && bzr push \
+ elif [ -d "$MR_REPO"/CVS ]; then \
+ cvs commit "$@" \
+ else \
+ error "unknown repo type" \
fi
-commit = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn commit "$@"; \
- elif [ -d "$MR_REPO"/.git ]; then \
- git commit -a "$@" && git push --all; \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs commit "$@"; \
- else \
- error "unknown repo type"; \
+diff = \
+ if [ -d "$MR_REPO"/.svn ]; then \
+ svn diff "$@" \
+ elif [ -d "$MR_REPO"/.git ]; then \
+ git diff "$@" \
+ elif [ -d "$MR_REPO"/.bzr ]; then \
+ bzr diff "$@" \
+ elif [ -d "$MR_REPO"/CVS ]; then \
+ cvs diff "$@" \
+ else \
+ error "unknown repo type" \
fi
-diff = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn diff "$@"; \
- elif [ -d "$MR_REPO"/.git ]; then \
- git diff "$@"; \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs diff "$@"; \
- else \
- error "unknown repo type"; \
+log = \
+ if [ -d "$MR_REPO"/.svn ]; then \
+ svn log"$@" \
+ elif [ -d "$MR_REPO"/.git ]; then \
+ git log "$@" \
+ elif [ -d "$MR_REPO"/.bzr ]; then \
+ bzr log "$@" \
+ elif [ -d "$MR_REPO"/CVS ]; then \
+ cvs log "$@" \
+ else \
+ error "unknown repo type" \
fi
-log = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn log"$@"; \
- elif [ -d "$MR_REPO"/.git ]; then \
- git log "$@"; \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs log "$@"; \
- else \
- error "unknown repo type"; \
+register = \
+ if [ -n "$1" ]; then \
+ cd "$1" \
+ fi \
+ basedir="$(basename $(pwd))" \
+ if [ -d .svn ]; then \
+ url=$(LANG=C svn info . | \
+ grep -i ^URL: | cut -d ' ' -f 2) \
+ if [ -z "$url" ]; then \
+ error "cannot determine svn url" \
+ fi \
+ echo "Registering svn url: $url" \
+ mr config "$(pwd)" checkout="svn co $url $basedir" \
+ elif [ -d .git ]; then \
+ url=$(LANG=C git-config --get remote.origin.url) \
+ if [ -z "$url" ]; then \
+ error "cannot determine git url" \
+ fi \
+ echo "Registering git url: $url" \
+ mr config "$(pwd)" checkout="git clone $url $basedir" \
+ elif [ -d .bzr ]; then \
+ url=$(cat .bzr/branch/parent) \
+ if [ -z "$url" ]; then \
+ error "cannot determine bzr url" \
+ fi \
+ echo "Registering bzr url: $url" \
+ mr config "$(pwd)" checkout="bzr clone $url $basedir" \
+ else \
+ error "unable to register this repo type" \
fi
list = true
-help = \
- if [ ! -e "$MR_PATH" ]; then \
- error "cannot find program path";\
- fi; \
- (pod2man -c mr "$MR_PATH" | man -l -) || \
+config =
+help = \
+ if [ ! -e "$MR_PATH" ]; then \
+ error "cannot find program path" \
+ fi \
+ (pod2man -c mr "$MR_PATH" | man -l -) || \
error "pod2man or man failed"
+
+ed = echo "A horse is a horse, of course, of course.."
+T = echo "I pity the fool."
projects / code / myrepos.git / blobdiff