-#!/usr/bin/perl
+#!/usr/bin/env perl
=head1 NAME
-mr - a Multiple Repository management tool
+mr - a tool to manage all your version control repos
=head1 SYNOPSIS
B<mr> [options] status
+B<mr> [options] clean [-f]
+
B<mr> [options] commit [-m "message"]
B<mr> [options] record [-m "message"]
+B<mr> [options] fetch
+
B<mr> [options] push
B<mr> [options] diff
B<mr> [options] log
+B<mr> [options] grep pattern
+
B<mr> [options] run command [param ...]
-B<mr> [options] bootstrap url [directory]
+B<mr> [options] bootstrap src [directory]
B<mr> [options] register [repository]
-B<mr> [options] config section ["parameter=[value]" ...]
+B<mr> [options] config section ["setting=[value]" ...]
B<mr> [options] action [params ...]
=head1 DESCRIPTION
-B<mr> is a Multiple Repository management tool. It can checkout, update, or
-perform other actions on a set of repositories as if they were one combined
-repository. It supports any combination of subversion, git, cvs, mercurial,
-bzr, darcs and fossil repositories, and support for other version
-control systems can easily be added.
+B<mr> is a tool to manage all your version control repos. It can checkout,
+update, or perform other actions on a set of repositories as if they were
+one combined repository. It supports any combination of subversion, git,
+cvs, mercurial, bzr, darcs, fossil and veracity repositories, and support
+for other version control systems can easily be added.
B<mr> cds into and operates on all registered repositories at or below your
working directory. Or, if you are in a subdirectory of a repository that
=item status
Displays a status report for each repository, showing what
-uncommitted changes are present in the repository.
+uncommitted changes are present in the repository. For distributed version
+control systems, also shows unpushed local branches.
+
+=item clean
+
+Print ignored files, untracked files and other cruft in the working directory.
+
+The optional -f parameter allows removing the files as well as printing them.
=item commit (or ci)
The optional -m parameter allows specifying a commit message.
+=item fetch
+
+Fetches from each repository's remote repository, but does not
+update the working copy. Only supported for some distributed version
+control systems.
+
=item push
Pushes committed local changes to the remote repository. A no-op for
Show the commit log.
+=item grep pattern
+
+Searches for a pattern in each repository using the grep subcommand. Uses
+ack-grep on VCS that do not have their own.
+
=item run command [param ...]
Runs the specified command in each repository.
=over 4
-=item bootstrap url [directory]
+=item bootstrap src [directory]
+
+Causes mr to retrieve the source C<src> and use it as a .mrconfig file to
+checkout the repositories listed in it, into the specified directory.
+
+B<mr> understands several types of sources:
+
+=over 4
+
+=item URL for curl
+
+C<src> may be an URL understood by B<curl>.
+
+=item copy via ssh
+
+To use B<scp> to download, the C<src> may have the form
+C<ssh://[user@]host:file>.
+
+=item local file
-Causes mr to download the url, and use it as a .mrconfig file
-to checkout the repositories listed in it, into the specified directory.
+You can retrieve the config file by other means and pass its B<path> as C<src>.
+
+=item standard input
+
+If source C<src> consists in a single dash C<->, config file is read from
+standard input.
+
+=back
The directory will be created if it does not exist. If no directory is
specified, the current directory will be used.
-If the .mrconfig file includes a repository named ".", that
+As a special case, if source C<src> includes a repository named ".", that
is checked out into the top of the specified directory.
=item list (or ls)
Adds, modifies, removes, or prints a value from a mrconfig file. The next
parameter is the name of the section the value is in. To add or modify
-values, use one or more instances of "parameter=value". Use "parameter=" to
-remove a parameter. Use just "parameter" to get the value of a parameter.
+values, use one or more instances of "setting=value". Use "setting=" to
+remove a setting. Use just "setting" to get the value of a that setting.
For example, to add (or edit) a repository in src/foo:
as well as look for a F<.mrconfig> file in the current directory, or in one
of its parent directories.
+=item -f
+
+=item --force
+
+Force mr to act on repositories that would normally be skipped due to their
+configuration.
+
=item -v
=item --verbose
Be verbose.
+=item -m
+
+=item --minimal
+
+Minimise output. If a command fails or there is any output then the usual
+output will be shown.
+
=item -q
=item --quiet
The C<DEFAULT> section allows setting default values for the sections that
come after it.
-The C<ALIAS> section allows adding aliases for actions. Each parameter
+The C<ALIAS> section allows adding aliases for actions. Each setting
is an alias, and its value is the action to use.
All other sections add repositories. The section header specifies the
will be passed through the shell for expansion. For example,
C<[$HOSTNAME]>, or C<[${HOSTNAME}foo]>).
-Within a section, each parameter defines a shell command to run to handle a
+Within a section, each setting defines a shell command to run to handle a
given action. mr contains default handlers for "update", "status",
"commit", and other standard actions.
The C<MR_ACTION> environment variable is set to the command being run
(update, checkout, etc).
-A few parameters have special meanings:
+A few settings have special meanings:
=over 4
=item skip
-If the "skip" parameter is set and its command returns true, then B<mr>
+If "skip" is set and its command returns true, then B<mr>
will skip acting on that repository. The command is passed the action
name in C<$1>.
Another way to use skip is for a lazy checkout. This makes mr skip
operating on a repo unless it already exists. To enable the
-repo, you have to explicitly check it out (using "mr -d foo checkout").
+repo, you have to explicitly check it out (using "mr --force -d foo checkout").
[foo]
checkout = ...
=item order
-The "order" parameter can be used to override the default ordering of
+The "order" setting can be used to override the default ordering of
repositories. The default order value is 10. Use smaller values to make
repositories be processed earlier, and larger values to make repositories
be processed later.
=item chain
-If the "chain" parameter is set and its command returns true, then B<mr>
+If "chain" is set and its command returns true, then B<mr>
will try to load a F<.mrconfig> file from the root of the repository.
=item include
-If the "include" parameter is set, its command is ran, and should output
+If "include" is set, its command is ran, and should output
additional mrconfig file content. The content is included as if it were
part of the including file.
-Unlike all other parameters, this parameter does not need to be placed
-within a section.
+Unlike everything else, "include" does not need to be placed within a section.
B<mr> ships several libraries that can be included to add support for
-additional version control type things (unison, git-svn, vcsh, git-fake-bare,
+additional version control type things (unison, git-svn, git-fake-bare,
git-subtree). To include them all, you could use:
include = cat /usr/share/mr/*
=item deleted
-If the "deleted" parameter is set and its command returns true, then
+If "deleted" is set and its command returns true, then
B<mr> will treat the repository as deleted. It won't ever actually delete
the repository, but it will warn if it sees the repository's directory.
This is useful when one mrconfig file is shared among multiple machines,
=item lib
-The "lib" parameter can specify some shell code that will be run
+The "lib" setting can contain some shell code that will be run
before each command, this can be a useful way to define shell
-functions for other commands to use. Unlike most other parameters,
-this can be specified multiple times, in which case the chunks of
-shell code are accumulatively concatenated together. This is
-particularly useful because it allows the user to build a library of
-shell functions defined in the [DEFAULT] section scattered across
-various mr modules (files referenced by an C<include> directive).
+functions for other commands to use.
+
+Unlike most other settings, this can be specified multiple times, in
+which case the chunks of shell code are accumulatively concatenated
+together.
=item fixups
-If the "fixups" parameter is set, its command is run whenever a repository
+If "fixups" is set, its command is run whenever a repository
is checked out, or updated. This provides an easy way to do things
like permissions fixups, or other tweaks to the repository content,
whenever the repository is changed.
-=item pre_ and post_
-
-If a "pre_action" parameter is set, its command is run before mr performs the
-specified action. Similarly, "post_action" parameters are run after mr
-successfully performs the specified action. For example, "pre_commit" is
-run before committing; "post_update" is run after updating.
-
-=back
+=item VCS_action
When looking for a command to run for a given action, mr first looks for
-a parameter with the same name as the action. If that is not found, it
-looks for a parameter named "VCS_action" (substituting in the name of the
-version control system and the action). The name of the version control
-system is itself determined by running each defined "VCS_test" action,
-until one succeeds.
+a setting with the same name as the action. If that is not found, it
+looks for a setting named "VCS_action" (substituting in the name of the
+version control system and the action).
Internally, mr has settings for "git_update", "svn_update", etc. To change
the action that is performed for a given version control system, you can
override these VCS specific actions. To add a new version control system,
you can just add VCS specific actions for it.
-As with the C<lib> parameter, if a parameter is suffixed with
-C<_append>, its value is concatenated to the existing value of the
-parameter for that config block, rather than overwriting it. In this
-way, actions such as C<fixup> can be constructed accumulatively.
+=item pre_ and post_
+
+If "pre_action" is set, its command is run before mr performs the
+specified action. Similarly, "post_action" commands are run after mr
+successfully performs the specified action. For example, "pre_commit" is
+run before committing; "post_update" is run after updating.
+
+=item _append
+
+Any setting can be suffixed with C<_append>, to add an additional value
+to the existing value of the setting. In this way, actions
+can be constructed accumulatively.
+
+=item VCS_test
+
+The name of the version control system is itself determined by
+running each defined "VCS_test" action, until one succeeds.
+
+=back
=head1 UNTRUSTED MRCONFIG FILES
Licensed under the GNU GPL version 2 or higher.
-http://kitenet.net/~joey/code/mr/
+http://myrepos.branchable.com/
=cut
# configurables
my $config_overridden=0;
my $verbose=0;
+my $minimal=0;
my $quiet=0;
my $stats=0;
+my $force=0;
my $insecure=0;
my $interactive=0;
my $max_depth;
my $jobs=1;
my $trust_all=0;
my $directory=getcwd();
+my $terminal=-t STDOUT && eval{require IO::Pty::Easy;IO::Pty::Easy->import();1;};
+my $HOME_MR_CONFIG = "$ENV{HOME}/.mrconfig";
$ENV{MR_CONFIG}=find_mrconfig();
# globals :-(
main();
+sub shellquote {
+ my $i=shift;
+ $i=~s/'/'"'"'/g;
+ return "'$i'";
+}
+
+# Runs a shell command using a supplied function.
+# The lib will be included in the shell command line, and any params
+# will be available in the shell as $1, $2, etc.
+my $lastlib;
+sub runsh {
+ my ($action, $topdir, $subdir, $command, $params, $runner) = @_;
+
+ # optimisation: avoid running the shell for true and false
+ if ($command =~ /^\s*true\s*$/) {
+ $?=0;
+ return 0;
+ }
+ elsif ($command =~ /^\s*false\s*$/) {
+ $?=0;
+ return 1;
+ }
+
+ my $quotedparams=join(" ", (map { shellquote($_) } @$params));
+ my $lib=exists $config{$topdir}{$subdir}{lib} ?
+ $config{$topdir}{$subdir}{lib}."\n" : "";
+ if ($verbose && (! defined $lastlib || $lastlib ne $lib)) {
+ print "mr library now: >>$lib<<\n";
+ $lastlib=$lib;
+ }
+ my $shellcode="set -e;".$lib.
+ "my_sh(){ $command\n }; my_sh $quotedparams";
+ print "mr $action: running $action >>$command<<\n" if $verbose;
+ $runner->($shellcode);
+}
+
+my %perl_cache;
+sub perl {
+ my $id=shift;
+ my $s=shift;
+ if ($s =~ m/^perl:\s+(.*)/s) {
+ return $perl_cache{$1} if exists $perl_cache{$1};
+ my $sub=eval "sub {$1}";
+ if (! defined $sub) {
+ print STDERR "mr: bad perl code in $id: $@\n";
+ }
+ return $perl_cache{$1} = $sub;
+ }
+ return undef;
+}
+
my %vcs;
sub vcs_test {
my ($action, $dir, $topdir, $subdir) = @_;
return $vcs{$dir};
}
- my $test="set -e\n";
+ my $test="";
+ my %perltest;
foreach my $vcs_test (
sort {
length $a <=> length $b
||
$a cmp $b
} grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
- my ($vcs)=$vcs_test=~/(.*)_test/;
- $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test;
- $test.="if my_$vcs_test; then echo $vcs; fi\n";
+ my ($vcs)=$vcs_test =~ /(.*)_test/;
+ my $p=perl($vcs_test, $config{$topdir}{$subdir}{$vcs_test});
+ if (defined $p) {
+ $perltest{$vcs}=$p;
+ }
+ else {
+ $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test;
+ $test.="if my_$vcs_test; then echo $vcs; fi\n";
+ }
}
- $test=$config{$topdir}{$subdir}{lib}."\n".$test
- if exists $config{$topdir}{$subdir}{lib};
-
- print "mr $action: running vcs test >>$test<<\n" if $verbose;
- my $vcs=`$test`;
- chomp $vcs;
- if ($vcs=~/\n/s) {
- $vcs=~s/\n/, /g;
- print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n";
+
+ my @vcs;
+ foreach my $vcs (keys %perltest) {
+ if ($perltest{$vcs}->()) {
+ push @vcs, $vcs;
+ }
+ }
+
+ push @vcs, split(/\n/,
+ runsh("vcs test", $topdir, $subdir, $test, [], sub {
+ my $sh=shift;
+ my $ret=`$sh`;
+ return $ret;
+ })) if length $test;
+ if (@vcs > 1) {
+ print STDERR "mr $action: found multiple possible repository types (@vcs) for ".fulldir($topdir, $subdir)."\n";
return undef;
}
- if (! length $vcs) {
+ if (! @vcs) {
return $vcs{$dir}=undef;
}
else {
- return $vcs{$dir}=$vcs;
+ return $vcs{$dir}=$vcs[0];
}
}
return $subdir =~ /^\// ? $subdir : $topdir.$subdir;
}
+sub terminal_friendly_spawn {
+ my $actionmsg = shift;
+ my $sh = shift;
+ my $quiet = shift;
+ my $minimal = shift;
+ my $output = "";
+ if ($terminal) {
+ my $pty = IO::Pty::Easy->new;
+ $pty->spawn($sh);
+ while ($pty->is_active) {
+ my $data = $pty->read();
+ $output .= $data if defined $data;
+ }
+ $pty->close;
+ } else {
+ $output = qx/$sh 2>&1/;
+ }
+ my $ret = $?;
+ if ($quiet && $ret != 0) {
+ print "$actionmsg\n" if $actionmsg;
+ print STDERR $output;
+ } elsif (!$quiet && (!$minimal || $output)) {
+ print "$actionmsg\n" if $actionmsg;
+ print $output;
+ }
+ return ($ret, $output ? 1 : 0);
+}
+
sub action {
my ($action, $dir, $topdir, $subdir, $force_checkout) = @_;
my $fulldir=fulldir($topdir, $subdir);
+ my $checkout_dir;
$ENV{MR_CONFIG}=$configfiles{$topdir};
- my $lib=exists $config{$topdir}{$subdir}{lib} ?
- $config{$topdir}{$subdir}{lib}."\n" : "";
my $is_checkout=($action eq 'checkout');
my $is_update=($action =~ /update/);
$ENV{MR_ACTION}=$action;
foreach my $testname ("skip", "deleted") {
+ next if $force && $testname eq "skip";
+
my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
if (defined $testcommand) {
- my $test="set -e;".$lib.
- "my_action(){ $testcommand\n }; my_action '$action'";
- print "mr $action: running $testname test >>$test<<\n" if $verbose;
- my $ret=system($test);
+ my $ret=runsh "$testname test", $topdir, $subdir,
+ $testcommand, [$action],
+ sub { system(shift()) };
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
}
if ($is_checkout) {
+ $checkout_dir=$dir;
if (! $force_checkout) {
if (-d $dir) {
print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
return FAILED;
}
else {
- print STDERR "mr $action: no defined action for $vcs repository $fulldir, skipping\n";
+ print STDERR "mr $action: no defined action for $vcs repository $fulldir, skipping\n" unless $minimal;
return SKIPPED;
}
}
$s=~s/^\Q$fulldir\E\/?//;
$actionmsg="mr $action: $fulldir (in subdir $s)";
}
- print "$actionmsg\n" unless $quiet;
+ print "$actionmsg\n" unless $quiet || $minimal;
- my $hookret=hook("pre_$action", $topdir, $subdir);
+ my ($hookret, $hook_out)=hook("pre_$action", $topdir, $subdir);
return $hookret if $hookret != OK;
- $command="set -e; ".$lib.
- "my_action(){ $command\n }; my_action ".
- join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print "mr $action: running >>$command<<\n" if $verbose;
- my $ret;
- if ($quiet) {
- my $output = qx/$command 2>&1/;
- $ret = $?;
- if ($ret != 0) {
- print "$actionmsg\n";
- print STDERR $output;
- }
- }
- else {
- $ret=system($command);
- }
+ my ($ret, $out)=runsh $action, $topdir, $subdir,
+ $command, \@ARGV, sub {
+ my $sh=shift;
+ if (!$jobs || $jobs > 1 || $quiet || $minimal) {
+ return terminal_friendly_spawn($actionmsg, $sh, $quiet, $minimal);
+ }
+ else {
+ system($sh);
+ }
+ };
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
return FAILED;
}
- my $ret=hook("post_$action", $topdir, $subdir);
+ my ($ret, $hook_out)=hook("post_$action", $topdir, $subdir);
return $ret if $ret != OK;
- if (($is_checkout || $is_update)) {
- my $ret=hook("fixups", $topdir, $subdir);
+ if ($is_checkout || $is_update) {
+ if ($is_checkout && ! $no_chdir) {
+ if (! chdir($checkout_dir)) {
+ print STDERR "mr $action: failed to chdir to $checkout_dir: $!\n";
+ return FAILED;
+ }
+ }
+ my ($ret, $hook_out)=hook("fixups", $topdir, $subdir);
return $ret if $ret != OK;
}
- return OK;
+ return (OK, $out || $hook_out);
}
}
}
my $command=$config{$topdir}{$subdir}{$hook};
return OK unless defined $command;
- my $lib=exists $config{$topdir}{$subdir}{lib} ?
- $config{$topdir}{$subdir}{lib}."\n" : "";
- my $shell="set -e;".$lib.
- "my_hook(){ $command\n }; my_hook";
- print "mr $hook: running >>$shell<<\n" if $verbose;
- my $ret;
- if ($quiet) {
- my $output = qx/$shell 2>&1/;
- $ret = $?;
- if ($ret != 0) {
- print STDERR $output;
- }
- }
- else {
- $ret=system($shell);
- }
+ my ($ret,$out)=runsh $hook, $topdir, $subdir, $command, [], sub {
+ my $sh=shift;
+ if (!$jobs || $jobs > 1 || $quiet || $minimal) {
+ return terminal_friendly_spawn(undef, $sh, $quiet, $minimal);
+ }
+ else {
+ system($sh);
+ }
+ };
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $hook: interrupted\n";
}
}
- return OK;
+ return (OK, $out);
}
# run actions on multiple repos, in parallel
close CHILD_STDERR;
close $outfh;
close $errfh;
- exit action($action, @$repo);
+ exit +(action($action, @$repo))[0];
}
close CHILD_STDOUT;
close CHILD_STDERR;
waitpid($active[$i][0], 0);
print STDOUT $out[$i][0];
print STDERR $out[$i][1];
- record($active[$i][1], $? >> 8);
+ record($active[$i][1], $? >> 8, $out[$i][0] || $out[$i][1]);
splice(@fhs, $i, 1);
splice(@active, $i, 1);
splice(@out, $i, 1);
sub record {
my $dir=shift()->[0];
my $ret=shift;
+ my $out=shift;
if ($ret == OK) {
push @ok, $dir;
- print "\n" unless $quiet;
+ print "\n" unless $quiet || ($minimal && !$out);
}
elsif ($ret == FAILED) {
if ($interactive) {
system((getpwuid($<))[8], "-i");
}
push @failed, $dir;
- print "\n" unless $quiet;
+ print "\n";
}
elsif ($ret == SKIPPED) {
push @skipped, $dir;
showstat($#ok+1, "ok", "ok"),
showstat($#failed+1, "failed", "failed"),
showstat($#skipped+1, "skipped", "skipped"),
- ).")\n" unless $quiet;
+ ).")\n" unless $quiet || $minimal;
if ($stats) {
if (@skipped) {
- print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet;
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet || $minimal;
}
if (@failed) {
print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
my $config=shift; # must be abs_pathed already
# We always trust ~/.mrconfig.
- return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig");
+ return 1 if $config eq abs_path($HOME_MR_CONFIG);
return 1 if $trust_all;
my $trustfile=$ENV{HOME}."/.mrtrust";
if (! %trusted) {
- $trusted{"$ENV{HOME}/.mrconfig"}=1;
+ $trusted{$HOME_MR_CONFIG}=1;
if (open (TRUST, "<", $trustfile)) {
while (<TRUST>) {
chomp;
s/^~\//$ENV{HOME}\//;
- $trusted{abs_path($_)}=1;
+ my $d=abs_path($_);
+ $trusted{$d}=1 if defined $d;
}
close TRUST;
}
return 0;
}
-sub trusterror {
- my ($err, $file, $line, $url)=@_;
-
- if (defined $url) {
- die "$err in untrusted $url line $line\n".
- "(To trust this url, --trust-all can be used; but please use caution;\n".
- "this can allow arbitrary code execution!)\n";
- }
- else {
- die "$err in untrusted $file line $line\n".
- "(To trust this file, list it in ~/.mrtrust.)\n";
- }
-}
-
my %loaded;
sub loadconfig {
my $f=shift;
my $dir=shift;
- my $bootstrap_url=shift;
+ my $bootstrap_src=shift;
my @toload;
# Keep track of the current line in the config file;
# when a file is included track the current line from the include.
- my $line=0;
+ my $lineno=0;
my $included=undef;
- my $includeline=0;
+
+ my $line;
my $nextline = sub {
if ($included) {
- $includeline++;
$included--;
}
else {
$included=undef;
- $includeline=0;
- $line++;
+ $lineno++;
}
- my $l=shift @lines;
- chomp $l;
- return $l
+ $line=shift @lines;
+ chomp $line;
+ return $line;
};
my $lineerror = sub {
my $msg=shift;
if (defined $included) {
- die "mr: $f line $line include line $includeline: $msg\n";
+ die "mr: $msg at $f line $lineno, included line: $line\n";
}
else {
- die "mr: $f line $line: $msg\n";
+ die "mr: $msg at $f line $lineno\n";
+ }
+ };
+ my $trusterror = sub {
+ my $msg=shift;
+
+ if (defined $bootstrap_src) {
+ die "mr: $msg in untrusted $bootstrap_src line $lineno\n".
+ "(To trust this url, --trust-all can be used; but please use caution;\n".
+ "this can allow arbitrary code execution!)\n";
+ }
+ else {
+ die "mr: $msg in untrusted $f line $lineno\n".
+ "(To trust this file, list it in ~/.mrtrust.)\n";
}
};
while (@lines) {
$_=$nextline->();
+ next if /^\s*\#/ || /^\s*$/;
+
if (! $trusted && /[[:cntrl:]]/) {
- trusterror("mr: illegal control character", $f, $line, $bootstrap_url);
+ $trusterror->("illegal control character");
}
- next if /^\s*\#/ || /^\s*$/;
if (/^\[([^\]]*)\]\s*$/) {
$section=$1;
if (! is_trusted_repo($section) ||
$section eq 'ALIAS' ||
$section eq 'DEFAULT') {
- trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url)
+ $trusterror->("illegal section \"[$section]\"");
}
}
$section=expandenv($section) if $trusted;
# settings in specific known-safe formats.
if ($parameter eq 'checkout') {
if (! is_trusted_checkout($value)) {
- trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url);
+ $trusterror->("illegal checkout command \"$value\"");
}
}
elsif ($parameter eq 'order') {
# safe.
}
else {
- trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url);
+ $trusterror->("illegal setting \"$parameter=$value\"");
}
}
my $action=shift;
# actions that do not operate on all repos
- if ($action eq 'help') {
- help(@ARGV);
- }
- elsif ($action eq 'config') {
+ if ($action eq 'config') {
config(@ARGV);
}
elsif ($action eq 'register') {
}
sub help {
- exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+ my $help=q#
+ case `uname -s` in
+ SunOS)
+ SHOWMANFILE="man -f"
+ ;;
+ Darwin)
+ SHOWMANFILE="man"
+ ;;
+ *)
+ SHOWMANFILE="man"
+ ;;
+ esac
+ if [ ! -e "$MR_PATH" ]; then
+ error "cannot find program path"
+ fi
+ tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
+ trap "rm -f $tmp" exit
+ pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
+ $SHOWMANFILE "$tmp" || error "man failed"
+ #;
+ exec($help) || die "exec: $!";
}
sub config {
}
sub bootstrap {
- my $url=shift @ARGV;
+ eval q{use File::Copy};
+ die $@ if $@;
+
+ my $src=shift @ARGV;
my $dir=shift @ARGV || ".";
- if (! defined $url || ! length $url) {
- die "mr: bootstrap requires url\n";
+ if (! defined $src || ! length $src) {
+ die "mr: bootstrap requires source\n";
}
-
- # Download the config file to a temporary location.
+
+ # Retrieve config file.
eval q{use File::Temp};
die $@ if $@;
my $tmpconfig=File::Temp->new();
- my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig);
- push(@curlargs, "-k") if $insecure;
- my $curlstatus = system(@curlargs);
- die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60;
- die "mr bootstrap: download of $url failed\n" if $curlstatus != 0;
+ if ($src =~ m!^[\w\d]+://!) {
+ # Download the config file to a temporary location.
+ my @downloader;
+ if ($src =~ m!^ssh://(.*)!) {
+ @downloader = ("scp", $1, $tmpconfig);
+ }
+ else {
+ @downloader = ("curl", "-A", "mr", "-L", "-s", $src, "-o", $tmpconfig);
+ push(@downloader, "-k") if $insecure;
+ }
+ my $status = system(@downloader);
+ die "mr bootstrap: invalid SSL certificate for $src (consider -k)\n"
+ if $downloader[0] eq 'curl' && $status >> 8 == 60;
+ die "mr bootstrap: download of $src failed\n" if $status != 0;
+ }
+ elsif ($src eq '-') {
+ # Config file is read from stdin.
+ copy(\*STDIN, $tmpconfig) || die "stdin: $!";
+ }
+ else {
+ # Config file is local.
+ die "mr bootstrap: cannot read file '$src'"
+ unless -r $src;
+ copy($src, $tmpconfig) || die "copy: $!";
+ }
+ # Sanity check on destination directory.
if (! -e $dir) {
system("mkdir", "-p", $dir);
}
# would normally be skipped.
my $topdir=abs_path(".")."/";
my @repo=($topdir, $topdir, ".");
- loadconfig($tmpconfig, $topdir, $url);
+ loadconfig($tmpconfig, $topdir, $src);
record(\@repo, action("checkout", @repo, 1))
if exists $config{$topdir}{"."}{"checkout"};
if (-e ".mrconfig") {
- print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $url\n";
+ print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $src\n";
}
else {
- eval q{use File::Copy};
- die $@ if $@;
move($tmpconfig, ".mrconfig") || die "rename: $!";
}
}
$dir=~s/\/[^\/]*$//;
}
- return "$ENV{HOME}/.mrconfig";
+ return $HOME_MR_CONFIG;
}
sub getopts {
"d|directory=s" => sub { $directory=abs_path($_[1]) },
"c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
"p|path" => sub { }, # now default, ignore
+ "f|force" => \$force,
"v|verbose" => \$verbose,
+ "m|minimal" => \$minimal,
"q|quiet" => \$quiet,
"s|stats" => \$stats,
"k|insecure" => \$insecure,
sub main {
getopts();
init();
+ help(@ARGV) if $ARGV[0] eq 'help';
startingconfig();
- loadconfig("$ENV{HOME}/.mrconfig");
+ loadconfig($HOME_MR_CONFIG);
loadconfig($ENV{MR_CONFIG});
#use Data::Dumper; print Dumper(\%config);
LANG=C bzr info | egrep -q '^Checkout'
}
lazy() {
- if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then
+ if [ -d "$MR_REPO" ]; then
return 1
else
return 0
fi
}
-svn_test = test -d "$MR_REPO"/.svn
-git_test = test -d "$MR_REPO"/.git
-bzr_test = test -d "$MR_REPO"/.bzr
-cvs_test = test -d "$MR_REPO"/CVS
-hg_test = test -d "$MR_REPO"/.hg
-darcs_test = test -d "$MR_REPO"/_darcs
-fossil_test = test -f "$MR_REPO"/_FOSSIL_
-git_bare_test =
- test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
- test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
- test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true
+svn_test = perl: -d "$ENV{MR_REPO}/.svn"
+git_test = perl: -e "$ENV{MR_REPO}/.git"
+bzr_test = perl: -d "$ENV{MR_REPO}/.bzr"
+cvs_test = perl: -d "$ENV{MR_REPO}/CVS"
+hg_test = perl: -d "$ENV{MR_REPO}/.hg"
+darcs_test = perl: -d "$ENV{MR_REPO}/_darcs"
+fossil_test = perl: -f "$ENV{MR_REPO}/_FOSSIL_"
+git_bare_test = perl:
+ -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" &&
+ -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" &&
+ `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get core.bare` =~ /true/
+vcsh_test = perl:
+ -d "$ENV{MR_REPO}/refs/heads" && -d "$ENV{MR_REPO}/refs/tags" &&
+ -d "$ENV{MR_REPO}/objects" && -f "$ENV{MR_REPO}/config" &&
+ `GIT_CONFIG="$ENV{MR_REPO}"/config git config --get vcsh.vcsh` =~ /true/
+veracity_test = perl: -d "$ENV{MR_REPO}/.sgdrawer"
svn_update = svn update "$@"
git_update = git pull "$@"
else
bzr merge --pull "$@"
fi
-cvs_update = cvs update "$@"
-hg_update = hg pull "$@" && hg update "$@"
+cvs_update = cvs -q update "$@"
+hg_update = hg pull "$@"; hg update "$@"
darcs_update = darcs pull -a "$@"
fossil_update = fossil pull "$@"
+vcsh_update = vcsh run "$MR_REPO" git pull "$@"
+veracity_update = vv pull "$@" && vv update "$@"
+
+git_fetch = git fetch --all --prune --tags
+git_svn_fetch = git svn fetch
+darcs_fetch = darcs fetch
+hg_fetch = hg pull
+
+svn_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ svn-clean "$@"
+ else
+ svn-clean --print "$@"
+ fi
+git_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ git clean -dx --force "$@"
+ else
+ git clean -dx --dry-run "$@"
+ fi
+git_svn_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ git clean -dx --force "$@"
+ else
+ git clean -dx --dry-run "$@"
+ fi
+bzr_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ bzr clean-tree --verbose --force --ignored --unknown --detritus "$@"
+ else
+ bzr clean-tree --verbose --dry-run --ignored --unknown --detritus "$@"
+ fi
+cvs_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ cvs-clean "$@"
+ else
+ cvs-clean --dry-run "$@"
+ fi
+hg_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ hg purge --print --all "$@"
+ hg purge --all "$@"
+ else
+ hg purge --print --all "$@"
+ fi
+fossil_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ fossil clean --dry-run --dotfiles --emptydirs "$@"
+ else
+ fossil clean --force --dotfiles --emptydirs "$@"
+ fi
+vcsh_clean =
+ if [ "x$1" = x-f ] ; then
+ shift
+ vcsh run "$MR_REPO" git clean -dx "$@"
+ else
+ vcsh run "$MR_REPO" git clean -dx --dry-run "$@"
+ fi
svn_status = svn status "$@"
-git_status = git status -s "$@" || true
-bzr_status = bzr status --short "$@"
-cvs_status = cvs status "$@"
-hg_status = hg status "$@"
+git_status = git status -s "$@" || true; git --no-pager log --branches --not --remotes --simplify-by-decoration --decorate --oneline || true
+bzr_status = bzr status --short "$@"; bzr missing
+cvs_status = cvs -q status | grep -E '^(File:.*Status:|\?)' | grep -v 'Status: Up-to-date'
+hg_status = hg status "$@"; hg summary --quiet | grep -v 'parent: 0:'
darcs_status = darcs whatsnew -ls "$@" || true
fossil_status = fossil changes "$@"
+vcsh_status = vcsh run "$MR_REPO" git -c status.relativePaths=false status -s "$@" || true
+veracity_status = vv status "$@"
svn_commit = svn commit "$@"
git_commit = git commit -a "$@" && git push --all
bzr commit "$@" && bzr push
fi
cvs_commit = cvs commit "$@"
-hg_commit = hg commit -m "$@" && hg push
-darcs_commit = darcs record -a -m "$@" && darcs push -a
+hg_commit = hg commit "$@" && hg push
+darcs_commit = darcs record -a "$@" && darcs push -a
fossil_commit = fossil commit "$@"
+vcsh_commit = vcsh run "$MR_REPO" git commit -a "$@" && vcsh run "$MR_REPO" git push --all
+veracity_commit = vv commit "$@" && vv push
git_record = git commit -a "$@"
bzr_record =
else
bzr commit "$@"
fi
-hg_record = hg commit -m "$@"
-darcs_record = darcs record -a -m "$@"
+hg_record = hg commit "$@"
+darcs_record = darcs record -a "$@"
fossil_record = fossil commit "$@"
+vcsh_record = vcsh run "$MR_REPO" git commit -a "$@"
+veracity_record = vv commit "$@"
svn_push = :
git_push = git push "$@"
hg_push = hg push "$@"
darcs_push = darcs push -a "$@"
fossil_push = fossil push "$@"
+vcsh_push = vcsh run "$MR_REPO" git push "$@"
+veracity_push = vv push "$@"
svn_diff = svn diff "$@"
git_diff = git diff "$@"
bzr_diff = bzr diff "$@"
-cvs_diff = cvs diff "$@"
+cvs_diff = cvs -q diff "$@"
hg_diff = hg diff "$@"
darcs_diff = darcs diff -u "$@"
fossil_diff = fossil diff "$@"
+vcsh_diff = vcsh run "$MR_REPO" git diff "$@"
+veracity_diff = vv diff "$@"
svn_log = svn log "$@"
git_log = git log "$@"
darcs_log = darcs changes "$@"
git_bare_log = git log "$@"
fossil_log = fossil timeline "$@"
+vcsh_log = vcsh run "$MR_REPO" git log "$@"
+veracity_log = vv log "$@"
+
+hg_grep = hg grep "$@"
+cvs_grep = ack-grep "$@"
+svn_grep = ack-grep "$@"
+git_svn_grep = git grep "$@"
+git_grep = git grep "$@"
+bzr_grep = ack-grep "$@"
+darcs_grep = ack-grep "$@"
run = "$@"
echo "Registering git url: $url in $MR_CONFIG"
mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
bzr_register =
- url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`"
+ url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}' | head -n 1`"
if [ -z "$url" ]; then
error "cannot determine bzr url"
fi
fi
echo "Registering git url: $url in $MR_CONFIG"
mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+vcsh_register =
+ url="`LC_ALL=C vcsh run "$MR_REPO" git config --get remote.origin.url`" || true
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
+ fi
+ echo "Registering git url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="vcsh clone '$url' '$MR_REPO'"
fossil_register =
url=`fossil remote-url`
repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'`
echo "Registering fossil repository $url in $MR_CONFIG"
mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'"
+veracity_register =
+ url=`vv config | grep sync_targets | sed -e 's/sync_targets:*.//g' -e 's/ //g'`
+ repo=`vv repo info | grep repository | sed -e 's/Current repository:*.//g' -e 's/ //g'`
+ echo "Registering veracity repository $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && vv checkout '$repo'"
svn_trusted_checkout = svn co $url $repo
svn_alt_trusted_checkout = svn checkout $url $repo
hg_trusted_checkout = hg clone $url $repo
darcs_trusted_checkout = darcs get $url $repo
git_bare_trusted_checkout = git clone --bare $url $repo
+vcsh_old_trusted_checkout = vcsh run "$MR_REPO" git clone $url $repo
+vcsh_trusted_checkout = vcsh clone $url $repo
# fossil: messy to do
+veracity_trusted_checkout = vv clone $url $repo
-help =
- case `uname -s` in
- SunOS)
- SHOWMANFILE="man -f"
- ;;
- Darwin)
- SHOWMANFILE="man"
- ;;
- *)
- SHOWMANFILE="man -l"
- ;;
- esac
- if [ ! -e "$MR_PATH" ]; then
- error "cannot find program path"
- fi
- tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
- trap "rm -f $tmp" exit
- pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
- $SHOWMANFILE "$tmp" || error "man failed"
list = true
config =
bootstrap =
projects / code / myrepos.git / blobdiff