Add support for skip = lazy, a mode where mr only operates on repositories that are...

[code/myrepos.git] / mr

diff --git a/mr b/mr
index abfa2e5187ec8d0512a6b612f0d7184cc5ecef89..d3f8efb0a750dba737ad9463fa9bf3d594309e72 100755 (executable)
--- a/mr
+++ b/mr
@@ -290,7 +290,7 @@ This obsolete flag is ignored.
 Here is an example .mrconfig file:
 
   [src]
 Here is an example .mrconfig file:
 
   [src]

-  checkout = svn co svn://svn.example.com/src/trunk src
+  checkout = svn checkout svn://svn.example.com/src/trunk src

   chain = true
 
   [src/linux-2.6]
   chain = true
 
   [src/linux-2.6]


@@ -317,14 +317,18 @@ will be passed through the shell for expansion. For example,
 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",
 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",

-"commit", and other standard actions. Normally you only need to specify what
-to do for "checkout".
+"commit", and other standard actions.
+
+Normally you only need to specify what to do for "checkout". Here you
+specify the command to run in order to create a checkout of the repository.
+The command will be run in the parent directory, and must create the
+repository's directory. So use "git clone", "svn checkout", "bzr branch"
+or "bzr checkout" (for a bound branch), etc.

 
 Note that these shell commands are run in a "set -e" shell
 environment, where any additional parameters you pass are available in
 
 Note that these shell commands are run in a "set -e" shell
 environment, where any additional parameters you pass are available in

-"$@". The "checkout" command is run in the parent of the repository
-directory, since the repository isn't checked out yet. All other commands
-are run inside the repository, though not necessarily at the top of it.
+"$@". All commands other than "checkout" are run inside the repository,
+though not necessarily at the top of it.

 
 The "MR_REPO" environment variable is set to the path to the top of the
 repository. (For the "register" action, "MR_REPO" is instead set to the 
 
 The "MR_REPO" environment variable is set to the path to the top of the
 repository. (For the "register" action, "MR_REPO" is instead set to the 


@@ -335,6 +339,9 @@ The "MR_CONFIG" environment variable is set to the .mrconfig file
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 

+The "MR_ACTION" environment variable is set to the command being run
+(update, checkout, etc).
+

 A few parameters have special meanings:
 
 =over 4
 A few parameters have special meanings:
 
 =over 4


@@ -345,13 +352,15 @@ If the "skip" parameter is set and its command returns true, then B<mr>
 will skip acting on that repository. The command is passed the action
 name in $1.
 
 will skip acting on that repository. The command is passed the action
 name in $1.
 

-Here are two examples. The first skips the repo unless
+Here are three examples. The first skips the repo unless

 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's
 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's

-been at least 12 hours since the last update.
+been at least 12 hours since the last update. The third skips operating
+on the repo unless it already exists (use mr checkout to enable the repo).

 
   skip = test `whoami` != joey
   skip = [ "$1" = update ] && ! hours_since "$1" 12
 
   skip = test `whoami` != joey
   skip = [ "$1" = update ] && ! hours_since "$1" 12

+  skip = lazy

 
 =item order
 
 
 =item order
 


@@ -575,6 +584,7 @@ sub action {
        my $is_update=($action =~ /update/);
 
        $ENV{MR_REPO}=$dir;
        my $is_update=($action =~ /update/);
 
        $ENV{MR_REPO}=$dir;

+       $ENV{MR_ACTION}=$action;

        
        foreach my $testname ("skip", "deleted") {
                my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
        
        foreach my $testname ("skip", "deleted") {
                my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);


@@ -751,6 +761,9 @@ sub hook {
                        print STDERR "mr $hook: received signal ".($? & 127)."\n";
                        return ABORT;
                }
                        print STDERR "mr $hook: received signal ".($? & 127)."\n";
                        return ABORT;
                }

+               else {
+                       return FAILED;
+               }

        }
 
        return OK;
        }
 
        return OK;


@@ -1231,21 +1244,26 @@ sub loadconfig {
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&

-                                   length $dir && $section ne "DEFAULT" &&
-                                   -e $dir.$section."/.mrconfig") {
-                                       my $ret=system($value);
-                                       if ($ret != 0) {
-                                               if (($? & 127) == 2) {
-                                                       print STDERR "mr: chain test interrupted\n";
-                                                       exit 2;
+                                   length $dir && $section ne "DEFAULT") {
+                                       my $chaindir="$section";
+                                       if ($chaindir !~ m!/!) {
+                                               $chaindir=$dir.$chaindir;
+                                       }
+                                       if (-e "$chaindir/.mrconfig") {
+                                               my $ret=system($value);
+                                               if ($ret != 0) {
+                                                       if (($? & 127) == 2) {
+                                                               print STDERR "mr: chain test interrupted\n";
+                                                               exit 2;
+                                                       }
+                                                       elsif ($? & 127) {
+                                                               print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                                       }

                                                }
                                                }

-                                               elsif ($? & 127) {
-                                                       print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                               else {
+                                                       push @toload, ["$chaindir/.mrconfig", $chaindir];

                                                }
                                        }
                                                }
                                        }

-                                       else {
-                                               push @toload, $dir.$section."/.mrconfig";
-                                       }

                                }
                        }
                }
                                }
                        }
                }


@@ -1254,8 +1272,8 @@ sub loadconfig {
                }
        }
 
                }
        }
 

-       foreach (@toload) {
-               loadconfig($_);
+       foreach my $c (@toload) {
+               loadconfig(@$c);

        }
 }
 
        }
 }
 


@@ -1691,6 +1709,13 @@ lib =
        is_bzr_checkout() {
                LANG=C bzr info | egrep -q '^Checkout'
        }
        is_bzr_checkout() {
                LANG=C bzr info | egrep -q '^Checkout'
        }

+       lazy() {
+               if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then
+                       return 1
+               else
+                       return 0
+               fi
+       }

 
 svn_test = test -d "$MR_REPO"/.svn
 git_test = test -d "$MR_REPO"/.git
 
 svn_test = test -d "$MR_REPO"/.svn
 git_test = test -d "$MR_REPO"/.git


@@ -1739,7 +1764,12 @@ darcs_commit = darcs record -a -m "$@" && darcs push -a
 fossil_commit = fossil commit "$@"
 
 git_record = git commit -a "$@"
 fossil_commit = fossil commit "$@"
 
 git_record = git commit -a "$@"

-bzr_record = bzr commit "$@"
+bzr_record =
+       if is_bzr_checkout; then
+               bzr commit --local "$@"
+       else
+               bzr commit "$@"
+       fi

 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"
 fossil_record = fossil commit "$@"
 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"
 fossil_record = fossil commit "$@"