B<mr> [options] record [-m "message"]
+B<mr> [options] push
+
B<mr> [options] diff
B<mr> [options] log
+B<mr> [options] run command [param ...]
+
B<mr> [options] bootstrap url [directory]
B<mr> [options] register [repository]
B<mr> is a Multiple Repository management tool. It can checkout, update, or
perform other actions on a set of repositories as if they were one combined
repository. It supports any combination of subversion, git, cvs, mercurial,
-bzr and darcs repositories, and support for other revision control systems can
-easily be added.
+bzr, darcs and fossil repositories, and support for other version
+control systems can easily be added.
B<mr> cds into and operates on all registered repositories at or below your
working directory. Or, if you are in a subdirectory of a repository that
B<mr> is configured by .mrconfig files, which list the repositories. It
starts by reading the .mrconfig file in your home directory, and this can
-in turn chain load .mrconfig files from repositories.
+in turn chain load .mrconfig files from repositories. It also automatically
+looks for a .mrconfig file in the current directory, or in one of its
+parent directories.
-These predefined commands should be fairly familiar to users of any revision
+These predefined commands should be fairly familiar to users of any version
control system:
=over 4
=item record
Records changes to the local repository, but does not push them to the
-remote repository. Only supported for distributed revision control systems.
+remote repository. Only supported for distributed version control systems.
The optional -m parameter allows specifying a commit message.
=item push
Pushes committed local changes to the remote repository. A no-op for
-centralized revision control systems.
+centralized version control systems.
=item diff
Show the commit log.
+=item run command [param ...]
+
+Runs the specified command in each repository.
+
=back
These commands are also available:
directory to register.
The mrconfig file that is modified is chosen by either the -c option, or by
-looking for the closest known one at or below the current directory.
+looking for the closest known one at or in a parent of the current directory.
=item config
mr config DEFAULT lib
-The ~/.mrconfig file is used by default. To use a different config file,
-use the -c option.
+The mrconfig file that is used is chosen by either the -c option, or by
+looking for the closest known one at or in a parent of the current directory.
=item offline
update"
Additional parameters can be passed to most commands, and are passed on
-unchanged to the underlying revision control system. This is mostly useful
-if the repositories mr will act on all use the same revision control
+unchanged to the underlying version control system. This is mostly useful
+if the repositories mr will act on all use the same version control
system.
=head1 OPTIONS
=item --config mrconfig
-Use the specified mrconfig file. The default is B<~/.mrconfig>
-
-=item -p
-
-=item --path
-
-Search in the current directory, and its parent directories and use
-the first B<.mrconfig> found, instead of the default B<~/.mrconfig>.
+Use the specified mrconfig file. The default is to use both B<~/.mrconfig>
+as well as look for a .mrconfig file in the current directory, or in one
+of its parent directories.
=item -v
=item --quiet
-Be quiet.
+Be quiet. This supresses mr's usual output, as well as any output from
+commands that are run (including stderr output). If a command fails,
+the output will be shown.
+
+=item -k
+
+=item --insecure
+
+Accept untrusted SSL certificates when bootstrapping.
=item -s
Trust all mrconfig files even if they are not listed in ~/.mrtrust.
Use with caution.
+=item -p
+
+=item --path
+
+This obsolete flag is ignored.
+
=back
-=head1 "MRCONFIG FILES"
+=head1 MRCONFIG FILES
Here is an example .mrconfig file:
[src]
- checkout = svn co svn://svn.example.com/src/trunk src
+ checkout = svn checkout svn://svn.example.com/src/trunk src
chain = true
[src/linux-2.6]
Within a section, each parameter defines a shell command to run to handle a
given action. mr contains default handlers for "update", "status",
-"commit", and other standard actions. Normally you only need to specify what
-to do for "checkout".
+"commit", and other standard actions.
+
+Normally you only need to specify what to do for "checkout". Here you
+specify the command to run in order to create a checkout of the repository.
+The command will be run in the parent directory, and must create the
+repository's directory. So use "git clone", "svn checkout", "bzr branch"
+or "bzr checkout" (for a bound branch), etc.
Note that these shell commands are run in a "set -e" shell
environment, where any additional parameters you pass are available in
-"$@". The "checkout" command is run in the parent of the repository
-directory, since the repository isn't checked out yet. All other commands
-are run inside the repository, though not necessarily at the top of it.
+"$@". All commands other than "checkout" are run inside the repository,
+though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the
repository. (For the "register" action, "MR_REPO" is instead set to the
that defines the repo being acted on, or, if the repo is not yet in a config
file, the .mrconfig file that should be modified to register the repo.
+The "MR_ACTION" environment variable is set to the command being run
+(update, checkout, etc).
+
A few parameters have special meanings:
=over 4
(included in mr's built-in library) to skip updating the repo unless it's
been at least 12 hours since the last update.
+ [mystuff]
+ checkout = ...
skip = test `whoami` != joey
+
+ [linux]
+ checkout = ...
skip = [ "$1" = update ] && ! hours_since "$1" 12
+
+Another way to use skip is for a lazy checkout. This makes mr skip
+operating on a repo unless it already exists. To enable the
+repo, you have to explicitly check it out (using "mr -d foo checkout").
+
+ [foo]
+ checkout = ...
+ skip = lazy
=item order
Unlike all other parameters, this parameter does not need to be placed
within a section.
+B<mr> ships several libraries that can be included to add support for
+additional version control type things (unison, git-svn, vcsh, git-fake-bare,
+git-subtree). To include them all, you could use:
+
+ include = cat /usr/share/mr/*
+
+See the individual files for details.
+
+=item deleted
+
+If the "deleted" parameter is set and its command returns true, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repository's directory.
+This is useful when one mrconfig file is shared amoung multiple machines,
+to keep track of and remember to delete old repositories.
+
=item lib
The "lib" parameter can specify some shell code that will be run before each
command, this can be a useful way to define shell functions for other commands
to use.
+=item fixups
+
+If the "fixups" parameter is set, its command is run whenever a repository
+is checked out, or updated. This provides an easy way to do things
+like permissions fixups, or other tweaks to the repository content,
+whenever the repository is changed.
+
+=item pre_ and post_
+
+If a "pre_action" parameter is set, its command is run before mr performs the
+specified action. Similarly, "post_action" parameters are run after mr
+successfully performs the specified action. For example, "pre_commit" is
+run before committing; "post_update" is run after updating.
+
=back
When looking for a command to run for a given action, mr first looks for
a parameter with the same name as the action. If that is not found, it
-looks for a parameter named "rcs_action" (substituting in the name of the
-revision control system and the action). The name of the revision control
-system is itself determined by running each defined "rcs_test" action,
+looks for a parameter named "VCS_action" (substituting in the name of the
+version control system and the action). The name of the version control
+system is itself determined by running each defined "VCS_test" action,
until one succeeds.
Internally, mr has settings for "git_update", "svn_update", etc. To change
-the action that is performed for a given revision control system, you can
-override these rcs specific actions. To add a new revision control system,
-you can just add rcs specific actions for it.
+the action that is performed for a given version control system, you can
+override these VCS specific actions. To add a new version control system,
+you can just add VCS specific actions for it.
-The ~/.mrlog file contains commands that mr has remembered to run later,
-due to being offline. You can delete or edit this file to remove commands,
-or even to add other commands for 'mr online' to run. If the file is
-present, mr assumes it is in offline mode.
-
-=head "UNTRUSTED MRCONFIG FILES"
+=head1 UNTRUSTED MRCONFIG FILES
Since mrconfig files can contain arbitrary shell commands, they can do
-anything. This flexability is good, but it also allows a malicious mrconfig
+anything. This flexibility is good, but it also allows a malicious mrconfig
file to delete your whole home directory. Such a file might be contained
-inside a repository that your main ~/.mrconfig checks out and chains to. To
-avoid worries about evil commands in a mrconfig file, mr
-has the ability to read mrconfig files in untrusted mode. Such files are
-limited to running only known safe commands (like "git clone") in a
-carefully checked manner.
+inside a repository that your main ~/.mrconfig checks out. To
+avoid worries about evil commands in a mrconfig file, mr defaults to
+reading all mrconfig files other than the main ~/.mrconfig in untrusted
+mode. In untrusted mode, mrconfig files are limited to running only known
+safe commands (like "git clone") in a carefully checked manner.
+
+To configure mr to trust other mrconfig files, list them in ~/.mrtrust.
+One mrconfig file should be listed per line. Either the full pathname
+should be listed, or the pathname can start with "~/" to specify a file
+relative to your home directory.
-By default, mr trusts all mrconfig files. (This default will change in a
-future release!) But if you have a ~/.mrtrust file, mr will only trust
-mrconfig files that are listed within it. (One file per line.) All other
-files will be treated as untrusted.
+=head1 OFFLINE LOG FILE
+
+The ~/.mrlog file contains commands that mr has remembered to run later,
+due to being offline. You can delete or edit this file to remove commands,
+or even to add other commands for 'mr online' to run. If the file is
+present, mr assumes it is in offline mode.
=head1 EXTENSIONS
files providing such extensions are available in /usr/share/mr/. See
the documentation in the files for details about using them.
+=head1 EXIT STATUS
+
+mr returns nonzero if a command failed in any of the repositories.
+
=head1 AUTHOR
-Copyright 2007-2009 Joey Hess <joey@kitenet.net>
+Copyright 2007-2011 Joey Hess <joey@kitenet.net>
Licensed under the GNU GPL version 2 or higher.
my $verbose=0;
my $quiet=0;
my $stats=0;
+my $insecure=0;
my $interactive=0;
my $max_depth;
my $no_chdir=0;
my $jobs=1;
my $trust_all=0;
my $directory=getcwd();
-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+$ENV{MR_CONFIG}=find_mrconfig();
# globals :-(
my %config;
main();
-my %rcs;
-sub rcs_test {
+my %vcs;
+sub vcs_test {
my ($action, $dir, $topdir, $subdir) = @_;
- if (exists $rcs{$dir}) {
- return $rcs{$dir};
+ if (exists $vcs{$dir}) {
+ return $vcs{$dir};
}
my $test="set -e\n";
- foreach my $rcs_test (
+ foreach my $vcs_test (
sort {
length $a <=> length $b
||
$a cmp $b
} grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
- my ($rcs)=$rcs_test=~/(.*)_test/;
- $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
- $test.="if my_$rcs_test; then echo $rcs; fi\n";
+ my ($vcs)=$vcs_test=~/(.*)_test/;
+ $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test;
+ $test.="if my_$vcs_test; then echo $vcs; fi\n";
}
$test=$config{$topdir}{$subdir}{lib}."\n".$test
if exists $config{$topdir}{$subdir}{lib};
- print "mr $action: running rcs test >>$test<<\n" if $verbose;
- my $rcs=`$test`;
- chomp $rcs;
- if ($rcs=~/\n/s) {
- $rcs=~s/\n/, /g;
- print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n";
+ print "mr $action: running vcs test >>$test<<\n" if $verbose;
+ my $vcs=`$test`;
+ chomp $vcs;
+ if ($vcs=~/\n/s) {
+ $vcs=~s/\n/, /g;
+ print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n";
return undef;
}
- if (! length $rcs) {
- return $rcs{$dir}=undef;
+ if (! length $vcs) {
+ return $vcs{$dir}=undef;
}
else {
- return $rcs{$dir}=$rcs;
+ return $vcs{$dir}=$vcs;
}
}
return undef;
}
- my $rcs=rcs_test(@_);
+ my $vcs=vcs_test(@_);
- if (defined $rcs &&
- exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
- return $config{$topdir}{$subdir}{$rcs."_".$action};
+ if (defined $vcs &&
+ exists $config{$topdir}{$subdir}{$vcs."_".$action}) {
+ return $config{$topdir}{$subdir}{$vcs."_".$action};
}
else {
return undef;
}
}
+sub fulldir {
+ my ($topdir, $subdir) = @_;
+ return $subdir =~ /^\// ? $subdir : $topdir.$subdir;
+}
+
sub action {
my ($action, $dir, $topdir, $subdir, $force_checkout) = @_;
-
+ my $fulldir=fulldir($topdir, $subdir);
+
$ENV{MR_CONFIG}=$configfiles{$topdir};
my $lib=exists $config{$topdir}{$subdir}{lib} ?
$config{$topdir}{$subdir}{lib}."\n" : "";
my $is_checkout=($action eq 'checkout');
+ my $is_update=($action =~ /update/);
- $ENV{MR_REPO}=$dir;
+ ($ENV{MR_REPO}=$dir) =~ s!/$!!;
+ $ENV{MR_ACTION}=$action;
+
+ foreach my $testname ("skip", "deleted") {
+ my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
+
+ if (defined $testcommand) {
+ my $test="set -e;".$lib.
+ "my_action(){ $testcommand\n }; my_action '$action'";
+ print "mr $action: running $testname test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ return ABORT;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: $testname test received signal ".($? & 127)."\n";
+ return ABORT;
+ }
+ }
+ if ($ret >> 8 == 0) {
+ if ($testname eq "deleted") {
+ if (-d $dir) {
+ print STDERR "mr error: $dir should be deleted yet still exists\n";
+ return FAILED;
+ }
+ }
+ print "mr $action: skip $dir skipped\n" if $verbose;
+ return SKIPPED;
+ }
+ }
+ }
if ($is_checkout) {
if (! $force_checkout) {
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
}
}
- elsif ($action =~ /update/) {
+ elsif ($is_update) {
if (! -d $dir) {
return action("checkout", $dir, $topdir, $subdir);
}
}
- my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);
my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
- if (defined $skiptest) {
- my $test="set -e;".$lib.
- "my_action(){ $skiptest\n }; my_action '$action'";
- print "mr $action: running skip test >>$test<<\n" if $verbose;
- my $ret=system($test);
- if ($ret != 0) {
- if (($? & 127) == 2) {
- print STDERR "mr $action: interrupted\n";
- return ABORT;
- }
- elsif ($? & 127) {
- print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
- return ABORT;
- }
- }
- if ($ret >> 8 == 0) {
- print "mr $action: $dir skipped per config file\n" if $verbose;
- return SKIPPED;
- }
- }
-
if ($is_checkout && ! -d $dir) {
print "mr $action: creating parent directory $dir\n" if $verbose;
system("mkdir", "-p", $dir);
return FAILED;
}
elsif (! defined $command) {
- my $rcs=rcs_test(@_);
- if (! defined $rcs) {
- print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n";
+ my $vcs=vcs_test(@_);
+ if (! defined $vcs) {
+ print STDERR "mr $action: unknown repository type and no defined $action command for $fulldir\n";
return FAILED;
}
else {
- print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n";
+ print STDERR "mr $action: no defined action for $vcs repository $fulldir, skipping\n";
return SKIPPED;
}
}
else {
+ my $actionmsg;
if (! $no_chdir) {
- print "mr $action: $topdir$subdir\n" unless $quiet;
+ $actionmsg="mr $action: $fulldir";
}
else {
my $s=$directory;
- $s=~s/^\Q$topdir$subdir\E\/?//;
- print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet;
+ $s=~s/^\Q$fulldir\E\/?//;
+ $actionmsg="mr $action: $fulldir (in subdir $s)";
}
+ print "$actionmsg\n" unless $quiet;
+
+ my $hookret=hook("pre_$action", $topdir, $subdir);
+ return $hookret if $hookret != OK;
+
$command="set -e; ".$lib.
"my_action(){ $command\n }; my_action ".
- join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV);
print "mr $action: running >>$command<<\n" if $verbose;
- my $ret=system($command);
+ my $ret;
+ if ($quiet) {
+ my $output = qx/$command 2>&1/;
+ $ret = $?;
+ if ($ret != 0) {
+ print "$actionmsg\n";
+ print STDERR $output;
+ }
+ }
+ else {
+ $ret=system($command);
+ }
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
return FAILED;
}
else {
- if ($action eq 'checkout' && ! -d $dir) {
+ if ($is_checkout && ! -d $dir) {
print STDERR "mr $action: $dir missing after checkout\n";;
return FAILED;
}
+ my $ret=hook("post_$action", $topdir, $subdir);
+ return $ret if $ret != OK;
+
+ if (($is_checkout || $is_update)) {
+ my $ret=hook("fixups", $topdir, $subdir);
+ return $ret if $ret != OK;
+ }
+
return OK;
}
}
}
+sub hook {
+ my ($hook, $topdir, $subdir) = @_;
+
+ my $command=$config{$topdir}{$subdir}{$hook};
+ return OK unless defined $command;
+ my $lib=exists $config{$topdir}{$subdir}{lib} ?
+ $config{$topdir}{$subdir}{lib}."\n" : "";
+ my $shell="set -e;".$lib.
+ "my_hook(){ $command\n }; my_hook";
+ print "mr $hook: running >>$shell<<\n" if $verbose;
+ my $ret;
+ if ($quiet) {
+ my $output = qx/$shell 2>&1/;
+ $ret = $?;
+ if ($ret != 0) {
+ print STDERR $output;
+ }
+ }
+ else {
+ $ret=system($shell);
+ }
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $hook: interrupted\n";
+ return ABORT;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $hook: received signal ".($? & 127)."\n";
+ return ABORT;
+ }
+ else {
+ return FAILED;
+ }
+ }
+
+ return OK;
+}
+
# run actions on multiple repos, in parallel
sub mrs {
my $action=shift;
if ($ret == OK) {
push @ok, $dir;
- print "\n";
+ print "\n" unless $quiet;
}
elsif ($ret == FAILED) {
if ($interactive) {
system((getpwuid($<))[8], "-i");
}
push @failed, $dir;
- print "\n";
+ print "\n" unless $quiet;
}
elsif ($ret == SKIPPED) {
push @skipped, $dir;
} @list;
}
-# figure out which repos to act on
+sub repodir {
+ my $repo=shift;
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+ my $ret=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ $ret=~s/\/\.$//;
+ return $ret;
+}
+
+# Figure out which repos to act on. Returns a list of array refs
+# in the format:
+#
+# [ "$full_repo_path/", "$mr_config_path/", $section_header ]
sub selectrepos {
my @repos;
foreach my $repo (repolist()) {
my $subdir=$repo->{subdir};
next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $dir=repodir($repo);
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
my $subdir=$repo->{subdir};
next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $dir=repodir($repo);
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
my $trustfile=$ENV{HOME}."/.mrtrust";
- if (! -e $trustfile) {
- print "mr: Assuming $config is trusted.\n";
- print "mr: For better security, you are encouraged to create ~/.mrtrust\n";
- print "mr: and list all trusted mrconfig files in it.\n";
- return 1;
- }
-
if (! %trusted) {
$trusted{"$ENV{HOME}/.mrconfig"}=1;
- open (TRUST, "<", $trustfile) || die "$trustfile: $!";
- while (<TRUST>) {
- chomp;
- s/^~\//$ENV{HOME}\//;
- $trusted{abs_path($_)}=1;
+ if (open (TRUST, "<", $trustfile)) {
+ while (<TRUST>) {
+ chomp;
+ s/^~\//$ENV{HOME}\//;
+ $trusted{abs_path($_)}=1;
+ }
+ close TRUST;
}
- close TRUST;
}
return $trusted{$config};
is_trusted_repo($words[$c])
);
}
- elsif (defined $words[$c] && $twords[$c] eq $words[$c]) {
+ elsif (defined $words[$c] && $words[$c]=~/^($twords[$c])$/) {
$match=1;
}
else {
return 0;
}
+sub trusterror {
+ my ($err, $file, $line, $url)=@_;
+
+ if (defined $url) {
+ die "$err in untrusted $url line $line\n".
+ "(To trust this url, --trust-all can be used; but please use caution;\n".
+ "this can allow arbitrary code execution!)\n";
+ }
+ else {
+ die "$err in untrusted $file line $line\n".
+ "(To trust this file, list it in ~/.mrtrust.)\n";
+ }
+}
+
my %loaded;
sub loadconfig {
my $f=shift;
my $dir=shift;
+ my $bootstrap_url=shift;
my @toload;
$trusted=1;
}
else {
- if (! -e $f) {
- return;
- }
-
my $absf=abs_path($f);
if ($loaded{$absf}) {
return;
}
}
+ if (! -e $f) {
+ return;
+ }
+
print "mr: loading config $f\n" if $verbose;
open($in, "<", $f) || die "mr: open $f: $!\n";
}
my @lines=<$in>;
- close $in;
+ close $in unless ref $f eq 'GLOB';
my $section;
+
+ # Keep track of the current line in the config file;
+ # when a file is included track the current line from the include.
my $line=0;
+ my $included=undef;
+ my $includeline=0;
+ my $nextline = sub {
+ if ($included) {
+ $includeline++;
+ $included--;
+ }
+ else {
+ $included=undef;
+ $includeline=0;
+ $line++;
+ }
+ my $l=shift @lines;
+ chomp $l;
+ return $l
+ };
+ my $lineerror = sub {
+ my $msg=shift;
+ if (defined $included) {
+ die "mr: $f line $line include line $includeline: $msg\n";
+ }
+ else {
+ die "mr: $f line $line: $msg\n";
+ }
+ };
+
while (@lines) {
- $_=shift @lines;
- $line++;
- chomp;
+ $_=$nextline->();
+
+ if (! $trusted && /[[:cntrl:]]/) {
+ trusterror("mr: illegal control character", $f, $line, $bootstrap_url);
+ }
+
next if /^\s*\#/ || /^\s*$/;
if (/^\[([^\]]*)\]\s*$/) {
$section=$1;
if (! is_trusted_repo($section) ||
$section eq 'ALIAS' ||
$section eq 'DEFAULT') {
- die "mr: illegal section \"[$section]\" in untrusted $f line $line\n";
+ trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url)
}
}
$section=expandenv($section) if $trusted;
+ if ($section ne 'ALIAS' &&
+ ! exists $config{$dir}{$section} &&
+ exists $config{$dir}{DEFAULT}) {
+ # copy in defaults
+ $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
+ }
}
elsif (/^(\w+)\s*=\s*(.*)/) {
my $parameter=$1;
# continued value
while (@lines && $lines[0]=~/^\s(.+)/) {
- shift(@lines);
- $line++;
$value.="\n$1";
chomp $value;
+ $nextline->();
}
if (! $trusted) {
- # Untrusted files can only contain checkout
- # parameters.
- if ($parameter ne 'checkout') {
- die "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line\n";
+ # Untrusted files can only contain a few
+ # settings in specific known-safe formats.
+ if ($parameter eq 'checkout') {
+ if (! is_trusted_checkout($value)) {
+ trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url);
+ }
+ }
+ elsif ($parameter eq 'order') {
+ # not interpreted as a command, so
+ # safe.
}
- if (! is_trusted_checkout($value)) {
- die "mr: illegal checkout command \"$value\" in untrusted $f line $line\n";
+ elsif ($value eq 'true' || $value eq 'false') {
+ # skip=true , deleted=true etc are
+ # safe.
+ }
+ else {
+ trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url);
}
}
if ($parameter eq "include") {
print "mr: including output of \"$value\"\n" if $verbose;
- unshift @lines, `$value`;
+ my @inc=`$value`;
if ($?) {
print STDERR "mr: include command exited nonzero ($?)\n";
}
+ $included += @inc;
+ unshift @lines, @inc;
next;
}
if (! defined $section) {
- die "$f line $.: parameter ($parameter) not in section\n";
- }
- if ($section ne 'ALIAS' &&
- ! exists $config{$dir}{$section} &&
- exists $config{$dir}{DEFAULT}) {
- # copy in defaults
- $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
+ $lineerror->("parameter ($parameter) not in section");
}
if ($section eq 'ALIAS') {
$alias{$parameter}=$value;
$knownactions{$parameter}=1;
}
if ($parameter eq 'chain' &&
- length $dir && $section ne "DEFAULT" &&
- -e $dir.$section."/.mrconfig") {
- my $ret=system($value);
- if ($ret != 0) {
- if (($? & 127) == 2) {
- print STDERR "mr: chain test interrupted\n";
- exit 2;
+ length $dir && $section ne "DEFAULT") {
+ my $chaindir="$section";
+ if ($chaindir !~ m!^/!) {
+ $chaindir=$dir.$chaindir;
+ }
+ if (-e "$chaindir/.mrconfig") {
+ my $ret=system($value);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr: chain test interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr: chain test received signal ".($? & 127)."\n";
+ }
}
- elsif ($? & 127) {
- print STDERR "mr: chain test received signal ".($? & 127)."\n";
+ else {
+ push @toload, ["$chaindir/.mrconfig", $chaindir];
}
}
- else {
- push @toload, $dir.$section."/.mrconfig";
- }
}
}
}
else {
- die "$f line $line: parse error\n";
+ $lineerror->("parse error");
}
}
- foreach (@toload) {
- loadconfig($_);
+ foreach my $c (@toload) {
+ loadconfig(@$c);
}
}
+sub startingconfig {
+ %alias=%config=%configfiles=%knownactions=%loaded=();
+ my $datapos=tell(DATA);
+ loadconfig(\*DATA);
+ seek(DATA,$datapos,0); # rewind
+}
+
sub modifyconfig {
my $f=shift;
# the section to modify or add
$ENV{MR_REPO}=~s/.*\/(.*)/$1/;
$command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
"my_action(){ $command\n }; my_action ".
- join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV);
print "mr register: running >>$command<<\n" if $verbose;
exec($command) || die "exec: $!";
}
eval q{use File::Temp};
die $@ if $@;
my $tmpconfig=File::Temp->new();
- if (system("curl", "-A", "mr", "-s", $url, "-o", $tmpconfig) != 0) {
- die "mr: download of $url failed\n";
- }
+ my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig);
+ push(@curlargs, "-k") if $insecure;
+ my $curlstatus = system(@curlargs);
+ die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60;
+ die "mr bootstrap: download of $url failed\n" if $curlstatus != 0;
if (! -e $dir) {
system("mkdir", "-p", $dir);
# would normally be skipped.
my $topdir=abs_path(".")."/";
my @repo=($topdir, $topdir, ".");
- loadconfig($tmpconfig, $topdir);
+ loadconfig($tmpconfig, $topdir, $url);
record(\@repo, action("checkout", @repo, 1))
if exists $config{$topdir}{"."}{"checkout"};
if (-e ".mrconfig") {
- print STDERR "mr: .mrconfig file already exists, not overwriting with $url\n";
+ print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $url\n";
}
else {
- rename($tmpconfig, ".mrconfig") || die "rename: $!";
- }
-
- exec("mr $ENV{MR_SWITCHES} -c .mrconfig checkout");
- die "failed to run mr checkout";
+ eval q{use File::Copy};
+ die $@ if $@;
+ move($tmpconfig, ".mrconfig") || die "rename: $!";
+ }
+
+ # Reload the config file (in case we got a different version)
+ # and checkout everything else.
+ startingconfig();
+ loadconfig(".mrconfig");
+ dispatch("checkout");
+ @skipped=grep { abs_path($_) ne abs_path($topdir) } @skipped;
+ showstats("bootstrap");
+ exitstats();
}
# alias expansion and command stemming
return $action;
}
-sub find_nearest_mrconfig {
+sub find_mrconfig {
my $dir=getcwd();
while (length $dir) {
if (-e "$dir/.mrconfig") {
}
$dir=~s/\/[^\/]*$//;
}
- die "no .mrconfig found in path\n";
+ return "$ENV{HOME}/.mrconfig";
}
sub getopts {
my $result=GetOptions(
"d|directory=s" => sub { $directory=abs_path($_[1]) },
"c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
- "p|path" => sub { $ENV{MR_CONFIG}=find_nearest_mrconfig(); $config_overridden=1 },
+ "p|path" => sub { }, # now default, ignore
"v|verbose" => \$verbose,
"q|quiet" => \$quiet,
"s|stats" => \$stats,
+ "k|insecure" => \$insecure,
"i|interactive" => \$interactive,
"n|no-recurse:i" => \$max_depth,
"j|jobs:i" => \$jobs,
$ENV{MR_PATH}=$Bin."/".$Script;
};
}
+
+sub exitstats {
+ if (@failed) {
+ exit 1;
+ }
+ else {
+ exit 0;
+ }
+}
sub main {
getopts();
init();
- loadconfig(\*DATA);
+ startingconfig();
+ loadconfig("$ENV{HOME}/.mrconfig");
loadconfig($ENV{MR_CONFIG});
#use Data::Dumper; print Dumper(\%config);
my $action=expandaction(shift @ARGV);
dispatch($action);
- showstats($action);
- if (@failed) {
- exit 1;
- }
- elsif (! @ok && @skipped) {
- exit 1;
- }
- else {
- exit 0;
- }
+ showstats($action);
+ exitstats();
}
# Finally, some useful actions that mr knows about by default.
if [ -z "$1" ] || [ -z "$2" ]; then
error "mr: usage: hours_since action num"
fi
- for dir in .git .svn .bzr CVS .hg _darcs; do
+ for dir in .git .svn .bzr CVS .hg _darcs _FOSSIL_; do
if [ -e "$MR_REPO/$dir" ]; then
flagfile="$MR_REPO/$dir/.mr_last$1"
break
fi
delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
if [ "$delta" -lt "$2" ]; then
- exit 0
+ return 1
else
touch "$flagfile"
- exit 1
+ return 0
+ fi
+ }
+ is_bzr_checkout() {
+ LANG=C bzr info | egrep -q '^Checkout'
+ }
+ lazy() {
+ if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then
+ return 1
+ else
+ return 0
fi
}
cvs_test = test -d "$MR_REPO"/CVS
hg_test = test -d "$MR_REPO"/.hg
darcs_test = test -d "$MR_REPO"/_darcs
+fossil_test = test -f "$MR_REPO"/_FOSSIL_
git_bare_test =
test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
svn_update = svn update "$@"
git_update = git pull "$@"
-bzr_update = bzr merge --pull "$@"
+bzr_update =
+ if is_bzr_checkout; then
+ bzr update "$@"
+ else
+ bzr merge --pull "$@"
+ fi
cvs_update = cvs update "$@"
hg_update = hg pull "$@" && hg update "$@"
darcs_update = darcs pull -a "$@"
+fossil_update = fossil pull "$@"
svn_status = svn status "$@"
-git_status = git status "$@" || true
-bzr_status = bzr status "$@"
+git_status = git status -s "$@" || true
+bzr_status = bzr status --short "$@"
cvs_status = cvs status "$@"
hg_status = hg status "$@"
darcs_status = darcs whatsnew -ls "$@" || true
+fossil_status = fossil changes "$@"
svn_commit = svn commit "$@"
git_commit = git commit -a "$@" && git push --all
-bzr_commit = bzr commit "$@" && bzr push
+bzr_commit =
+ if is_bzr_checkout; then
+ bzr commit "$@"
+ else
+ bzr commit "$@" && bzr push
+ fi
cvs_commit = cvs commit "$@"
hg_commit = hg commit -m "$@" && hg push
darcs_commit = darcs record -a -m "$@" && darcs push -a
+fossil_commit = fossil commit "$@"
git_record = git commit -a "$@"
-bzr_record = bzr commit "$@"
+bzr_record =
+ if is_bzr_checkout; then
+ bzr commit --local "$@"
+ else
+ bzr commit "$@"
+ fi
hg_record = hg commit -m "$@"
darcs_record = darcs record -a -m "$@"
+fossil_record = fossil commit "$@"
svn_push = :
git_push = git push "$@"
cvs_push = :
hg_push = hg push "$@"
darcs_push = darcs push -a "$@"
+fossil_push = fossil push "$@"
svn_diff = svn diff "$@"
git_diff = git diff "$@"
cvs_diff = cvs diff "$@"
hg_diff = hg diff "$@"
darcs_diff = darcs diff -u "$@"
+fossil_diff = fossil diff "$@"
svn_log = svn log "$@"
git_log = git log "$@"
hg_log = hg log "$@"
darcs_log = darcs changes "$@"
git_bare_log = git log "$@"
+fossil_log = fossil timeline "$@"
+
+run = "$@"
svn_register =
url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`
error "cannot determine bzr url"
fi
echo "Registering bzr url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr branch '$url' '$MR_REPO'"
cvs_register =
repo=`cat CVS/Repository`
root=`cat CVS/Root`
fi
echo "Registering git url: $url in $MR_CONFIG"
mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+fossil_register =
+ url=`fossil remote-url`
+ repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'`
+ echo "Registering fossil repository $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'"
svn_trusted_checkout = svn co $url $repo
svn_alt_trusted_checkout = svn checkout $url $repo
git_trusted_checkout = git clone $url $repo
-bzr_trusted_checkout = bzr clone $url $repo
+bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo
# cvs: too hard
hg_trusted_checkout = hg clone $url $repo
darcs_trusted_checkout = darcs get $url $repo
git_bare_trusted_checkout = git clone --bare $url $repo
+# fossil: messy to do
help =
projects / code / myrepos.git / blobdiff