]> git.madduck.net Git - code/myrepos.git/blobdiff - mr

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

Allow option bundling, mostly so "-j2" will work.
[code/myrepos.git] / mr
diff --git a/mr b/mr
index cf5ffc0659b0cf28f55cfc8e797f7aa18e06627e..9501322e7a6d04004266f4a21bdc64136dc2dfc2 100755 (executable)
--- a/mr
+++ b/mr
@@ -209,7 +209,11 @@ directory, since the repository isn't checked out yet. All other commands
 are run inside the repository, though not necessarily at the top of it.
 
 The "MR_REPO" environment variable is set to the path to the top of the
-repository. The "MR_CONFIG" environment variable is set to the .mrconfig file
+repository. (For the "register" action, "MR_REPO" is instead set to the 
+basename of the directory that should be created when checking the
+repository out.)
+
+The "MR_CONFIG" environment variable is set to the .mrconfig file
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
@@ -247,6 +251,15 @@ If the "chain" parameter is set and its command returns true, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
@@ -283,7 +296,8 @@ use warnings;
 use strict;
 use Getopt::Long;
 use Cwd qw(getcwd abs_path);
-use POSIX "WNOHANG";
+
+# things that can happen when mr runs a command
 use constant {
        OK => 0,
        FAILED => 1,
@@ -291,243 +305,42 @@ use constant {
        ABORT => 3,
 };
 
-$SIG{INT}=sub {
-       print STDERR "mr: interrupted\n";
-       exit 2;
-};
-
-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+# configurables
 my $config_overridden=0;
 my $verbose=0;
 my $stats=0;
 my $no_recurse=0;
+my $no_chdir=0;
 my $jobs=1;
+my $directory=getcwd();
+
+# globals :-(
 my %config;
 my %configfiles;
 my %knownactions;
 my %alias;
-my $directory=getcwd();
-
-Getopt::Long::Configure("no_permute");
-my $result=GetOptions(
-       "d|directory=s" => sub { $directory=abs_path($_[1]) },
-       "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
-       "v|verbose" => \$verbose,
-       "s|stats" => \$stats,
-       "n|no-recurse" => \$no_recurse,
-       "j|jobs=i" => \$jobs,
-);
-if (! $result || @ARGV < 1) {
-       die("Usage: mr [-d directory] action [params ...]\n".
-           "(Use mr help for man page.)\n");
-
-}
-if (! defined $directory) {
-       die("mr: failed to determine working directory\n");
-}
-
-# Make sure MR_CONFIG is an absolute path, but don't use abs_path since
-# the config file might be a symlink to elsewhere, and the directory it's
-# in is significant.
-if ($ENV{MR_CONFIG} !~ /^\//) {
-       $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
-}
-# Try to set MR_PATH to the path to the program.
-eval {
-       use FindBin qw($Bin $Script);
-       $ENV{MR_PATH}=$Bin."/".$Script;
-};
-
-loadconfig(\*DATA);
-loadconfig($ENV{MR_CONFIG});
-#use Data::Dumper;
-#print Dumper(\%config);
-
-# alias expansion and command stemming
-my $action=shift @ARGV;
-if (exists $alias{$action}) {
-       $action=$alias{$action};
-}
-if (! exists $knownactions{$action}) {
-       my @matches = grep { /^\Q$action\E/ }
-               keys %knownactions, keys %alias;
-       if (@matches == 1) {
-               $action=$matches[0];
-       }
-       elsif (@matches == 0) {
-               die "mr: unknown action \"$action\" (known actions: ".
-                       join(", ", sort keys %knownactions).")\n";
-       }
-       else {
-               die "mr: ambiguous action \"$action\" (matches: ".
-                       join(", ", @matches).")\n";
-       }
-}
-
-# commands that do not operate on all repos
-if ($action eq 'help') {
-       exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
-}
-elsif ($action eq 'config') {
-       if (@ARGV < 2) {
-               die "mr config: not enough parameters\n";
-       }
-       my $section=shift;
-       if ($section=~/^\//) {
-               # try to convert to a path relative to the config file
-               my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
-               $dir=abs_path($dir);
-               $dir.="/" unless $dir=~/\/$/;
-               if ($section=~/^\Q$dir\E(.*)/) {
-                       $section=$1;
-               }
-       }
-       my %changefields;
-       foreach (@ARGV) {
-               if (/^([^=]+)=(.*)$/) {
-                       $changefields{$1}=$2;
-               }
-               else {
-                       my $found=0;
-                       foreach my $topdir (sort keys %config) {
-                               if (exists $config{$topdir}{$section} &&
-                                   exists $config{$topdir}{$section}{$_}) {
-                                       print $config{$topdir}{$section}{$_}."\n";
-                                       $found=1;
-                                       last if $section eq 'DEFAULT';
-                               }
-                       }
-                       if (! $found) {
-                               die "mr $action: $section $_ not set\n";
-                       }
-               }
-       }
-       modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
-       exit 0;
-}
-elsif ($action eq 'register') {
-       if (! $config_overridden) {
-               # Find the closest known mrconfig file to the current
-               # directory.
-               $directory.="/" unless $directory=~/\/$/;
-               foreach my $topdir (reverse sort keys %config) {
-                       next unless length $topdir;
-                       if ($directory=~/^\Q$topdir\E/) {
-                               $ENV{MR_CONFIG}=$configfiles{$topdir};
-                               last;
-                       }
-               }
-       }
-       my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
-               "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
-               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-       print STDERR "mr $action: running >>$command<<\n" if $verbose;
-       exec($command) || die "exec: $!";
-}
-
-# an ordered list of repos
-my @list;
-foreach my $topdir (sort keys %config) {
-       foreach my $subdir (sort keys %{$config{$topdir}}) {
-               push @list, {
-                       topdir => $topdir,
-                       subdir => $subdir,
-                       order => $config{$topdir}{$subdir}{order},
-               };
-       }
-}
-@list = sort {
-               $a->{order}  <=> $b->{order}
-                            ||
-               $a->{topdir} cmp $b->{topdir}
-                            ||
-               $a->{subdir} cmp $b->{subdir}
-       } @list;
-
-# work out what repos to act on
-my @repos;
-my $nochdir=0;
-foreach my $repo (@list) {
-       my $topdir=$repo->{topdir};
-       my $subdir=$repo->{subdir};
-
-       next if $subdir eq 'DEFAULT';
-       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
-       my $d=$directory;
-       $dir.="/" unless $dir=~/\/$/;
-       $d.="/" unless $d=~/\/$/;
-       next if $no_recurse && $d ne $dir;
-       next if $dir ne $d && $dir !~ /^\Q$d\E/;
-       push @repos, [$dir, $topdir, $subdir];
-}
-if (! @repos) {
-       # fallback to find a leaf repo
-       foreach my $repo (reverse @list) {
-               my $topdir=$repo->{topdir};
-               my $subdir=$repo->{subdir};
-               
-               next if $subdir eq 'DEFAULT';
-               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
-               my $d=$directory;
-               $dir.="/" unless $dir=~/\/$/;
-               $d.="/" unless $d=~/\/$/;
-               if ($d=~/^\Q$dir\E/) {
-                       push @repos, [$dir, $topdir, $subdir];
-                       last;
-               }
-       }
-       $nochdir=1;
-}
-
-# run the action on each repository and print stats
 my (@ok, @failed, @skipped);
-if ($jobs > 1) {
-       mrs(@repos);
-}
-else {
-       foreach my $repo (@repos) {
-               record($repo, action($action, @$repo));
-       }
-}
-if (! @ok && ! @failed && ! @skipped) {
-       die "mr $action: no repositories found to work on\n";
-}
-print "mr $action: finished (".join("; ",
-       showstat($#ok+1, "ok", "ok"),
-       showstat($#failed+1, "failed", "failed"),
-       showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-if ($stats) {
-       if (@skipped) {
-               print "mr $action: (skipped: ".join(" ", @skipped).")\n";
-       }
-       if (@failed) {
-               print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
-       }
-}
-if (@failed) {
-       exit 1;
-}
-elsif (! @ok && @skipped) {
-       exit 1;
-}
-exit 0;
+
+main();
 
 sub rcs_test { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
 
        my $test="set -e\n";
-       foreach my $rcs_test (grep { /_test/ } keys %{$config{$topdir}{$subdir}}) {
+       foreach my $rcs_test (
+                       sort {
+                               length $a <=> length $b 
+                                         ||
+                                      $a cmp $b
+                       } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
                my ($rcs)=$rcs_test=~/(.*)_test/;
-               $test="my_$rcs_test(){ $config{$topdir}{$subdir}{$rcs_test}\n }\n".$test;
+               $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
                $test.="if my_$rcs_test; then echo $rcs; fi\n";
        }
        $test=$config{$topdir}{$subdir}{lib}."\n".$test
                if exists $config{$topdir}{$subdir}{lib};
        
        print "mr $action: running rcs test >>$test<<\n" if $verbose;
-       $ENV{MR_REPO}=$dir;
-       $ENV{MR_CONFIG}=$configfiles{$topdir};
        my $rcs=`$test`;
        chomp $rcs;
        if (! length $rcs) {
@@ -540,6 +353,10 @@ sub rcs_test { #{{{
        
 sub findcommand { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
+       
+       if (exists $config{$topdir}{$subdir}{$action}) {
+               return $config{$topdir}{$subdir}{$action};
+       }
 
        my $rcs=rcs_test(@_);
 
@@ -547,9 +364,6 @@ sub findcommand { #{{{
            exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
                return $config{$topdir}{$subdir}{$rcs."_".$action};
        }
-       elsif (exists $config{$topdir}{$subdir}{$action}) {
-               return $config{$topdir}{$subdir}{$action};
-       }
        else {
                return undef;
        }
@@ -607,7 +421,7 @@ sub action { #{{{
                }
        }
        
-       if (! $nochdir && ! chdir($dir)) {
+       if (! $no_chdir && ! chdir($dir)) {
                print STDERR "mr $action: failed to chdir to $dir: $!\n";
                return FAILED;
        }
@@ -623,7 +437,7 @@ sub action { #{{{
                }
        }
        else {
-               if (! $nochdir) {
+               if (! $no_chdir) {
                        print "mr $action: $topdir$subdir\n";
                }
                else {
@@ -634,7 +448,7 @@ sub action { #{{{
                $command="set -e; ".$lib.
                        "my_action(){ $command\n }; my_action ".
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-               print STDERR "mr $action: running >>$command<<\n" if $verbose;
+               print "mr $action: running >>$command<<\n" if $verbose;
                my $ret=system($command);
                if ($ret != 0) {
                        if (($? & 127) == 2) {
@@ -667,6 +481,9 @@ sub action { #{{{
 
 # run actions on multiple repos, in parallel
 sub mrs { #{{{
+       my $action=shift;
+       my @repos=@_;
+
        $| = 1;
        my @active;
        my @fhs;
@@ -755,6 +572,26 @@ sub record { #{{{
        }
 } #}}}
 
+sub showstats { #{{{
+       my $action=shift;
+       if (! @ok && ! @failed && ! @skipped) {
+               die "mr $action: no repositories found to work on\n";
+       }
+       print "mr $action: finished (".join("; ",
+               showstat($#ok+1, "ok", "ok"),
+               showstat($#failed+1, "failed", "failed"),
+               showstat($#skipped+1, "skipped", "skipped"),
+       ).")\n";
+       if ($stats) {
+               if (@skipped) {
+                       print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+               }
+               if (@failed) {
+                       print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+               }
+       }
+} #}}}
+
 sub showstat { #{{{
        my $count=shift;
        my $singular=shift;
@@ -765,6 +602,64 @@ sub showstat { #{{{
        return;
 } #}}}
 
+# an ordered list of repos
+sub repolist { #{{{
+       my @list;
+       foreach my $topdir (sort keys %config) {
+               foreach my $subdir (sort keys %{$config{$topdir}}) {
+                       push @list, {
+                               topdir => $topdir,
+                               subdir => $subdir,
+                               order => $config{$topdir}{$subdir}{order},
+                       };
+               }
+       }
+       return sort {
+               $a->{order}  <=> $b->{order}
+                            ||
+               $a->{topdir} cmp $b->{topdir}
+                            ||
+               $a->{subdir} cmp $b->{subdir}
+       } @list;
+} #}}}
+
+# figure out which repos to act on
+sub selectrepos { #{{{
+       my @repos;
+       foreach my $repo (repolist()) {
+               my $topdir=$repo->{topdir};
+               my $subdir=$repo->{subdir};
+
+               next if $subdir eq 'DEFAULT';
+               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+               my $d=$directory;
+               $dir.="/" unless $dir=~/\/$/;
+               $d.="/" unless $d=~/\/$/;
+               next if $no_recurse && $d ne $dir;
+               next if $dir ne $d && $dir !~ /^\Q$d\E/;
+               push @repos, [$dir, $topdir, $subdir];
+       }
+       if (! @repos) {
+               # fallback to find a leaf repo
+               foreach my $repo (reverse repolist()) {
+                       my $topdir=$repo->{topdir};
+                       my $subdir=$repo->{subdir};
+                       
+                       next if $subdir eq 'DEFAULT';
+                       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+                       my $d=$directory;
+                       $dir.="/" unless $dir=~/\/$/;
+                       $d.="/" unless $d=~/\/$/;
+                       if ($d=~/^\Q$dir\E/) {
+                               push @repos, [$dir, $topdir, $subdir];
+                               last;
+                       }
+               }
+               $no_chdir=1;
+       }
+       return @repos;
+} #}}}
+
 my %loaded;
 sub loadconfig { #{{{
        my $f=shift;
@@ -839,6 +734,12 @@ sub loadconfig { #{{{
                                chomp $value;
                        }
 
+                       if ($parameter eq "include") {
+                               print "mr: including output of \"$value\"\n" if $verbose;
+                               unshift @lines, `$value`;
+                               next;
+                       }
+
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
@@ -856,18 +757,23 @@ sub loadconfig { #{{{
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
-                               $knownactions{$parameter}=1 if $parameter !~ /_/;
+                               if ($parameter =~ /.*_(.*)/) {
+                                       $knownactions{$1}=1;
+                               }
+                               else {
+                                       $knownactions{$parameter}=1;
+                               }
                                if ($parameter eq 'chain' &&
                                    length $dir && $section ne "DEFAULT" &&
                                    -e $dir.$section."/.mrconfig") {
                                        my $ret=system($value);
                                        if ($ret != 0) {
                                                if (($? & 127) == 2) {
-                                                       print STDERR "mr $action: chain test interrupted\n";
+                                                       print STDERR "mr: chain test interrupted\n";
                                                        exit 2;
                                                }
                                                elsif ($? & 127) {
-                                                       print STDERR "mr $action: chain test received signal ".($? & 127)."\n";
+                                                       print STDERR "mr: chain test received signal ".($? & 127)."\n";
                                                }
                                        }
                                        else {
@@ -983,6 +889,200 @@ sub modifyconfig { #{{{
        close $out;     
 } #}}}
 
+sub dispatch { #{{{
+       my $action=shift;
+
+       # actions that do not operate on all repos
+       if ($action eq 'help') {
+               help(@ARGV);
+       }
+       elsif ($action eq 'config') {
+               config(@ARGV);
+       }
+       elsif ($action eq 'register') {
+               register(@ARGV);
+       }
+
+       if ($jobs > 1) {
+               mrs($action, selectrepos());
+       }
+       else {
+               foreach my $repo (selectrepos()) {
+                       record($repo, action($action, @$repo));
+               }
+       }
+} #}}}
+
+sub help { #{{{
+       exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+} #}}}
+       
+sub config { #{{{
+       if (@_ < 2) {
+               die "mr config: not enough parameters\n";
+       }
+       my $section=shift;
+       if ($section=~/^\//) {
+               # try to convert to a path relative to the config file
+               my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
+               $dir=abs_path($dir);
+               $dir.="/" unless $dir=~/\/$/;
+               if ($section=~/^\Q$dir\E(.*)/) {
+                       $section=$1;
+               }
+       }
+       my %changefields;
+       foreach (@_) {
+               if (/^([^=]+)=(.*)$/) {
+                       $changefields{$1}=$2;
+               }
+               else {
+                       my $found=0;
+                       foreach my $topdir (sort keys %config) {
+                               if (exists $config{$topdir}{$section} &&
+                                   exists $config{$topdir}{$section}{$_}) {
+                                       print $config{$topdir}{$section}{$_}."\n";
+                                       $found=1;
+                                       last if $section eq 'DEFAULT';
+                               }
+                       }
+                       if (! $found) {
+                               die "mr config: $section $_ not set\n";
+                       }
+               }
+       }
+       modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
+       exit 0;
+} #}}}
+
+sub register { #{{{
+       if (! $config_overridden) {
+               # Find the closest known mrconfig file to the current
+               # directory.
+               $directory.="/" unless $directory=~/\/$/;
+               my $foundconfig=0;
+               foreach my $topdir (reverse sort keys %config) {
+                       next unless length $topdir;
+                       if ($directory=~/^\Q$topdir\E/) {
+                               $ENV{MR_CONFIG}=$configfiles{$topdir};
+                               $directory=$topdir;
+                               $foundconfig=1;
+                               last;
+                       }
+               }
+               if (! $foundconfig) {
+                       $directory=""; # no config file, use builtin
+               }
+       }
+       if (@ARGV) {
+               my $subdir=shift @ARGV;
+               if (! chdir($subdir)) {
+                       print STDERR "mr register: failed to chdir to $subdir: $!\n";
+               }
+       }
+
+       $ENV{MR_REPO}=getcwd();
+       my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT');
+       if (! defined $command) {
+               die "mr register: unknown repository type\n";
+       }
+
+       $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+       $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+               "my_action(){ $command\n }; my_action ".
+               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+       print "mr register: running >>$command<<\n" if $verbose;
+       exec($command) || die "exec: $!";
+} #}}}
+
+# alias expansion and command stemming
+sub expandaction { #{{{
+       my $action=shift;
+       if (exists $alias{$action}) {
+               $action=$alias{$action};
+       }
+       if (! exists $knownactions{$action}) {
+               my @matches = grep { /^\Q$action\E/ }
+                       keys %knownactions, keys %alias;
+               if (@matches == 1) {
+                       $action=$matches[0];
+               }
+               elsif (@matches == 0) {
+                       die "mr: unknown action \"$action\" (known actions: ".
+                               join(", ", sort keys %knownactions).")\n";
+               }
+               else {
+                       die "mr: ambiguous action \"$action\" (matches: ".
+                               join(", ", @matches).")\n";
+               }
+       }
+       return $action;
+} #}}}
+
+sub getopts { #{{{
+       Getopt::Long::Configure("bundling", "no_permute");
+       my $result=GetOptions(
+               "d|directory=s" => sub { $directory=abs_path($_[1]) },
+               "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
+               "v|verbose" => \$verbose,
+               "s|stats" => \$stats,
+               "n|no-recurse" => \$no_recurse,
+               "j|jobs=i" => \$jobs,
+       );
+       if (! $result || @ARGV < 1) {
+               die("Usage: mr [-d directory] action [params ...]\n".
+                   "(Use mr help for man page.)\n");
+       }
+} #}}}
+
+sub init { #{{{
+       $SIG{INT}=sub {
+               print STDERR "mr: interrupted\n";
+               exit 2;
+       };
+       
+       $ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+       # This can happen if it's run in a directory that was removed
+       # or other strangeness.
+       if (! defined $directory) {
+               die("mr: failed to determine working directory\n");
+       }
+       # Make sure MR_CONFIG is an absolute path, but don't use abs_path since
+       # the config file might be a symlink to elsewhere, and the directory it's
+       # in is significant.
+       if ($ENV{MR_CONFIG} !~ /^\//) {
+               $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
+       }
+       # Try to set MR_PATH to the path to the program.
+       eval {
+               use FindBin qw($Bin $Script);
+               $ENV{MR_PATH}=$Bin."/".$Script;
+       };
+} #}}}
+
+sub main { #{{{
+       getopts();
+       init();
+       loadconfig(\*DATA);
+       loadconfig($ENV{MR_CONFIG});
+       #use Data::Dumper; print Dumper(\%config);
+
+       my $action=expandaction(shift @ARGV);
+       dispatch($action);
+       showstats($action);
+
+       if (@failed) {
+               exit 1;
+       }
+       elsif (! @ok && @skipped) {
+               exit 1;
+       }
+       else {
+               exit 0;
+       }
+} #}}}
+
 # Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
 #DATA{{{
@@ -995,7 +1095,6 @@ ls = list
 [DEFAULT]
 order = 10
 lib =
-       PWD="$pwd"
        error() {
                echo "mr: $@" >&2
                exit 1
@@ -1027,25 +1126,6 @@ lib =
                        exit 1
                fi
        }
-       get_git_repo_type()
-       {
-               if [ -d "$1"/.git ] && [ -d "$1"/.git/refs/heads ] &&
-                       [ -d "$1"/.git/objects ] && [ -f "$1"/.git/config ];
-                       then
-                       echo non-bare
-               elif [ -d "$1"/refs/heads ] && [ -d "$1"/refs/tags ] &&
-                       [ -d "$1"/objects ] && [ -f "$1"/config ]; then
-                       local bare
-                       bare="$(GIT_CONFIG="$1"/config git-config --get core.bare)"
-                       case "$bare" in
-                               true) echo bare;;
-                               false) echo fake-bare;;
-                               *) return 255;;
-                       esac
-               else
-                       return 1
-               fi
-       }
 
 svn_test = test -d "$MR_REPO"/.svn
 git_test = test -d "$MR_REPO"/.git
@@ -1053,17 +1133,13 @@ bzr_test = test -d "$MR_REPO"/.bzr
 cvs_test = test -d "$MR_REPO"/CVS
 hg_test  = test -d "$MR_REPO"/.hg
 darcs_test = test -d "$MR_REPO"/_darcs
+git_bare_test =
+       test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
+       test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
+       test "$(GIT_CONFIG="$MR_REPO"/config git config --get core.bare)" = true
 
 svn_update = svn update "$@"
-git_update = 
-       # all this is because of a bug in git-fetch, which requires GIT_DIR set
-       local git_dir_override; git_dir_override=.git
-       case "$(get_git_repo_type "$MR_REPO")" in
-               fake-bare) git_dir_override="$MR_REPO";;
-       esac
-       args="$@"
-       [ -z "$args" ] && args="-t origin master"
-       eval GIT_DIR="$git_dir_override" git pull "$args"
+git_update = if [ "$@" ]; then git pull "$@"; else git pull -t origin master; fi
 bzr_update = bzr merge "$@"
 cvs_update = cvs update "$@"
 hg_update  = hg pull "$@" && hg update "$@"
@@ -1077,24 +1153,14 @@ hg_status  = hg status "$@"
 darcs_status = darcs whatsnew -ls "$@"
 
 svn_commit = svn commit "$@"
-git_commit = 
-       case "$(get_git_repo_type "$MR_REPO")" in
-               bare) error "cannot commit to bare git repositories";;
-               fake-bare) error "commit does not work for fake bare git repositories (yet).";;
-       esac
-       git commit -a "$@" && git push --all
+git_commit = git commit -a "$@" && git push --all
 bzr_commit = bzr commit "$@" && bzr push
 cvs_commit = cvs commit "$@"
 hg_commit  = hg commit -m "$@" && hg push
 darcs_commit = darcs commit -a -m "$@" && darcs push -a
 
 svn_diff = svn diff "$@"
-git_diff = 
-       case "$(get_git_repo_type "$MR_REPO")" in
-               bare) error "cannot diff in bare git repositories";;
-               fake-bare) error "diff does not work for fake bare git repositories (yet).";;
-       esac
-       git diff "$@"
+git_diff = git diff "$@"
 bzr_diff = bzr diff "$@"
 cvs_diff = cvs diff "$@"
 hg_diff  = hg diff "$@"
@@ -1106,91 +1172,52 @@ bzr_log = bzr log "$@"
 cvs_log = cvs log "$@"
 hg_log  = hg log "$@"
 darcs_log = darcs changes "$@"
+git_bare_log = git log "$@"
 
 svn_register =
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
        url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
        if [ -z "$url" ]; then
                error "cannot determine svn url"
        fi
        echo "Registering svn url: $url in $MR_CONFIG"
-       mr -c "$MR_CONFIG" config "$PWD" checkout="svn co $url $basedir"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
 git_register = 
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
-       local repo_type; repo_type="$(get_git_repo_type .)"
-       local config;
-       case "$repo_type" in
-               non-bare) config=.git/config;;
-               bare|fake-bare) config=config;;
-       esac
-       url="$(LANG=C GIT_CONFIG="$config" git-config --get remote.origin.url)"
+       url="$(LANG=C git config --get remote.origin.url)" || true
        if [ -z "$url" ]; then
                error "cannot determine git url"
        fi
-       case "$repo_type" in
-               bare|fake-bare)
-                       # this seems like a bare repo as it has no
-                       # worktree.
-                       local work_tree
-                       work_tree="$(git-config --get core.worktree)" || :
-                       if [ ! -d "$work_tree" ]; then
-                               error "git worktree $work_tree does not exist"
-                       fi
-                       suffix=" (with worktree $work_tree)"
-                       mr -c "$MR_CONFIG" config "$PWD" \
-                               lib="GIT_WORK_TREE=$work_tree; export GIT_WORK_TREE"
-                       ;;
-       esac
-       echo "Registering git url: $url in $MR_CONFIG${suffix:-}"
-       mr -c "$MR_CONFIG" config "$PWD" checkout="git clone $url $basedir"
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
 bzr_register =
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
        url=$(cat .bzr/branch/parent)
        if [ -z "$url" ]; then
                error "cannot determine bzr url"
        fi
        echo "Registering bzr url: $url in $MR_CONFIG"
-       mr -c "$MR_CONFIG" config "$PWD" checkout="bzr clone $url $basedir"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
 cvs_register =
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
        repo=$(cat CVS/Repository)
        root=$(cat CVS/Root)
        if [ -z "$root" ]; then
                error "cannot determine cvs root"
                fi
        echo "Registering cvs repository $repo at root $root"
-       mr -c "$MR_CONFIG" config "$PWD" \
-               checkout="cvs -d '$root' co -d $basedir $repo"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
 hg_register = 
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
        url=$(hg showconfig paths.default)
        echo "Registering mercurial repo url: $url in $MR_CONFIG"
-       mr -c "$MR_CONFIG" config "$PWD" \
-               checkout="hg clone $url $basedir"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
 darcs_register = 
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="${PWD##*/}"
        url=$(cat _darcs/prefs/defaultrepo)
        echo "Registering darcs repository $url in $MR_CONFIG"
-       mr -c "$MR_CONFIG" config "$PWD" \
-               checkout="darcs get $url $basedir"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url'p '$MR_REPO'"
+git_bare_register = 
+       url="$(LANG=C GIT_CONFIG=config git config --get remote.origin.url)" || true
+       if [ -z "$url" ]; then
+               error "cannot determine git url"
+       fi
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
 
 help =
        if [ ! -e "$MR_PATH" ]; then