reword

[code/myrepos.git] / mr

diff --git a/mr b/mr
index 10a547f1ec979ff508a74b175e2d07a09b14a1bd..f14ba4dddebfd38fb55f9a823e7cea2e7050b2b2 100755 (executable)
--- a/mr
+++ b/mr
@@ -41,7 +41,7 @@ B<mr> [options] remember action [params ...]
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined
 repository. It supports any combination of subversion, git, cvs, mercurial,
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined
 repository. It supports any combination of subversion, git, cvs, mercurial,

-bzr, darcs and fossil repositories, and support for other revision
+bzr, darcs and fossil repositories, and support for other version

 control systems can easily be added.
 
 B<mr> cds into and operates on all registered repositories at or below your
 control systems can easily be added.
 
 B<mr> cds into and operates on all registered repositories at or below your


@@ -55,7 +55,7 @@ in turn chain load .mrconfig files from repositories. It also automatically
 looks for a .mrconfig file in the current directory, or in one of its
 parent directories.
 
 looks for a .mrconfig file in the current directory, or in one of its
 parent directories.
 

-These predefined commands should be fairly familiar to users of any revision
+These predefined commands should be fairly familiar to users of any version

 control system:
 
 =over 4
 control system:
 
 =over 4


@@ -87,14 +87,14 @@ The optional -m parameter allows specifying a commit message.
 =item record
 
 Records changes to the local repository, but does not push them to the
 =item record
 
 Records changes to the local repository, but does not push them to the

-remote repository. Only supported for distributed revision control systems.
+remote repository. Only supported for distributed version control systems.

 
 The optional -m parameter allows specifying a commit message.
 
 =item push
 
 Pushes committed local changes to the remote repository. A no-op for
 
 The optional -m parameter allows specifying a commit message.
 
 =item push
 
 Pushes committed local changes to the remote repository. A no-op for

-centralized revision control systems.
+centralized version control systems.

 
 =item diff
 
 
 =item diff
 


@@ -189,8 +189,8 @@ Actions can be abbreviated to any unambiguous substring, so
 update"
 
 Additional parameters can be passed to most commands, and are passed on
 update"
 
 Additional parameters can be passed to most commands, and are passed on

-unchanged to the underlying revision control system. This is mostly useful
-if the repositories mr will act on all use the same revision control
+unchanged to the underlying version control system. This is mostly useful
+if the repositories mr will act on all use the same version control

 system.
 
 =head1 OPTIONS
 system.
 
 =head1 OPTIONS


@@ -208,8 +208,8 @@ the current working directory.
 
 =item --config mrconfig
 
 
 =item --config mrconfig
 

-Use the specified mrconfig file. The default is to use both B<~/.mrconfig>
-as well as look for a .mrconfig file in the current directory, or in one
+Use the specified mrconfig file. The default is to use both F<~/.mrconfig>
+as well as look for a F<.mrconfig> file in the current directory, or in one

 of its parent directories.
 
 =item -v
 of its parent directories.
 
 =item -v


@@ -222,7 +222,7 @@ Be verbose.
 
 =item --quiet
 
 
 =item --quiet
 

-Be quiet. This supresses mr's usual output, as well as any output from
+Be quiet. This suppresses mr's usual output, as well as any output from

 commands that are run (including stderr output). If a command fails,
 the output will be shown.
 
 commands that are run (including stderr output). If a command fails,
 the output will be shown.
 


@@ -274,7 +274,7 @@ a good speedup in updates without loading the machine too much.
 
 =item --trust-all
 
 
 =item --trust-all
 

-Trust all mrconfig files even if they are not listed in ~/.mrtrust.
+Trust all mrconfig files even if they are not listed in F<~/.mrtrust>.

 Use with caution.
 
 =item -p
 Use with caution.
 
 =item -p


@@ -287,10 +287,10 @@ This obsolete flag is ignored.
 
 =head1 MRCONFIG FILES
 
 
 =head1 MRCONFIG FILES
 

-Here is an example .mrconfig file:
+Here is an example F<.mrconfig> file:

 
   [src]
 
   [src]

-  checkout = svn co svn://svn.example.com/src/trunk src
+  checkout = svn checkout svn://svn.example.com/src/trunk src

   chain = true
 
   [src/linux-2.6]
   chain = true
 
   [src/linux-2.6]


@@ -298,14 +298,14 @@ Here is an example .mrconfig file:
        cd linux-2.6 &&
        git checkout -b mybranch origin/master
 
        cd linux-2.6 &&
        git checkout -b mybranch origin/master
 

-The .mrconfig file uses a variant of the INI file format. Lines starting with
-"#" are comments. Values can be continued to the following line by
-indenting the line with whitespace.
+The F<.mrconfig> file uses a variant of the INI file format. Lines
+starting with "#" are comments. Values can be continued to the
+following line by indenting the line with whitespace.

 
 

-The "DEFAULT" section allows setting default values for the sections that
+The C<DEFAULT> section allows setting default values for the sections that

 come after it.
 
 come after it.
 

-The "ALIAS" section allows adding aliases for actions. Each parameter
+The C<ALIAS> section allows adding aliases for actions. Each parameter

 is an alias, and its value is the action to use.
 
 All other sections add repositories. The section header specifies the
 is an alias, and its value is the action to use.
 
 All other sections add repositories. The section header specifies the


@@ -313,27 +313,34 @@ directory where the repository is located. This is relative to the directory
 that contains the mrconfig file, but you can also choose to use absolute
 paths. (Note that you can use environment variables in section names; they
 will be passed through the shell for expansion. For example, 
 that contains the mrconfig file, but you can also choose to use absolute
 paths. (Note that you can use environment variables in section names; they
 will be passed through the shell for expansion. For example, 

-"[$HOSTNAME]", or "[${HOSTNAME}foo]")
+C<[$HOSTNAME]>, or C<[${HOSTNAME}foo]>).

 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",
 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",

-"commit", and other standard actions. Normally you only need to specify what
-to do for "checkout".
+"commit", and other standard actions.

 
 

-Note that these shell commands are run in a "set -e" shell
+Normally you only need to specify what to do for "checkout". Here you
+specify the command to run in order to create a checkout of the repository.
+The command will be run in the parent directory, and must create the
+repository's directory. So use C<git clone>, C<svn checkout>, C<bzr branch>
+or C<bzr checkout> (for a bound branch), etc.
+
+Note that these shell commands are run in a C<set -e> shell

 environment, where any additional parameters you pass are available in
 environment, where any additional parameters you pass are available in

-"$@". The "checkout" command is run in the parent of the repository
-directory, since the repository isn't checked out yet. All other commands
-are run inside the repository, though not necessarily at the top of it.
+C<$@>. All commands other than "checkout" are run inside the repository,
+though not necessarily at the top of it.

 
 

-The "MR_REPO" environment variable is set to the path to the top of the
+The C<MR_REPO> environment variable is set to the path to the top of the

 repository. (For the "register" action, "MR_REPO" is instead set to the 
 basename of the directory that should be created when checking the
 repository out.)
 
 repository. (For the "register" action, "MR_REPO" is instead set to the 
 basename of the directory that should be created when checking the
 repository out.)
 

-The "MR_CONFIG" environment variable is set to the .mrconfig file
+The C<MR_CONFIG> environment variable is set to the .mrconfig file

 that defines the repo being acted on, or, if the repo is not yet in a config
 that defines the repo being acted on, or, if the repo is not yet in a config

-file, the .mrconfig file that should be modified to register the repo.
+file, the F<.mrconfig> file that should be modified to register the repo.
+
+The C<MR_ACTION> environment variable is set to the command being run
+(update, checkout, etc).

 
 A few parameters have special meanings:
 
 
 A few parameters have special meanings:
 


@@ -343,15 +350,28 @@ A few parameters have special meanings:
 
 If the "skip" parameter is set and its command returns true, then B<mr>
 will skip acting on that repository. The command is passed the action
 
 If the "skip" parameter is set and its command returns true, then B<mr>
 will skip acting on that repository. The command is passed the action

-name in $1.
+name in C<$1>.

 
 Here are two examples. The first skips the repo unless
 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's
 been at least 12 hours since the last update.
 
 
 Here are two examples. The first skips the repo unless
 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's
 been at least 12 hours since the last update.
 

+  [mystuff]
+  checkout = ...

   skip = test `whoami` != joey
   skip = test `whoami` != joey

+
+  [linux]
+  checkout = ...

   skip = [ "$1" = update ] && ! hours_since "$1" 12
   skip = [ "$1" = update ] && ! hours_since "$1" 12

+ 
+Another way to use skip is for a lazy checkout. This makes mr skip
+operating on a repo unless it already exists. To enable the 
+repo, you have to explicitly check it out (using "mr -d foo checkout").
+
+  [foo]
+  checkout = ...
+  skip = lazy

 
 =item order
 
 
 =item order
 


@@ -366,7 +386,7 @@ repository, ordering it to be processed earlier is not recommended.
 =item chain
 
 If the "chain" parameter is set and its command returns true, then B<mr>
 =item chain
 
 If the "chain" parameter is set and its command returns true, then B<mr>

-will try to load a .mrconfig file from the root of the repository.
+will try to load a F<.mrconfig> file from the root of the repository.

 
 =item include
 
 
 =item include
 


@@ -377,19 +397,31 @@ part of the including file.
 Unlike all other parameters, this parameter does not need to be placed
 within a section.
 
 Unlike all other parameters, this parameter does not need to be placed
 within a section.
 

+B<mr> ships several libraries that can be included to add support for
+additional version control type things (unison, git-svn, vcsh, git-fake-bare,
+git-subtree). To include them all, you could use:
+
+  include = cat /usr/share/mr/*
+
+See the individual files for details.
+

 =item deleted
 
 If the "deleted" parameter is set and its command returns true, then
 B<mr> will treat the repository as deleted. It won't ever actually delete
 the repository, but it will warn if it sees the repository's directory.
 =item deleted
 
 If the "deleted" parameter is set and its command returns true, then
 B<mr> will treat the repository as deleted. It won't ever actually delete
 the repository, but it will warn if it sees the repository's directory.

-This is useful when one mrconfig file is shared amoung multiple machines,
+This is useful when one mrconfig file is shared among multiple machines,

 to keep track of and remember to delete old repositories.
 
 =item lib
 
 to keep track of and remember to delete old repositories.
 
 =item lib
 

-The "lib" parameter can specify some shell code that will be run before each
-command, this can be a useful way to define shell functions for other commands
-to use.
+The "lib" parameter can specify some shell code that will be run
+before each command, this can be a useful way to define shell
+functions for other commands to use. 
+
+Unlike most other parameters, this can be specified multiple times, in
+which case the chunks of shell code are accumulatively concatenated
+together.

 
 =item fixups
 
 
 =item fixups
 


@@ -398,6 +430,20 @@ is checked out, or updated. This provides an easy way to do things
 like permissions fixups, or other tweaks to the repository content,
 whenever the repository is changed.
 
 like permissions fixups, or other tweaks to the repository content,
 whenever the repository is changed.
 

+=item VCS_action
+
+When looking for a command to run for a given action, mr first looks for
+a parameter with the same name as the action. If that is not found, it
+looks for a parameter named "VCS_action" (substituting in the name of the
+version control system and the action). The name of the version control
+system is itself determined by running each defined "VCS_test" action,
+until one succeeds.
+
+Internally, mr has settings for "git_update", "svn_update", etc. To change
+the action that is performed for a given version control system, you can
+override these VCS specific actions. To add a new version control system,
+you can just add VCS specific actions for it.
+

 =item pre_ and post_
 
 If a "pre_action" parameter is set, its command is run before mr performs the
 =item pre_ and post_
 
 If a "pre_action" parameter is set, its command is run before mr performs the


@@ -405,39 +451,33 @@ specified action. Similarly, "post_action" parameters are run after mr
 successfully performs the specified action. For example, "pre_commit" is
 run before committing; "post_update" is run after updating.
 
 successfully performs the specified action. For example, "pre_commit" is
 run before committing; "post_update" is run after updating.
 

-=back
+=item _append

 
 

-When looking for a command to run for a given action, mr first looks for
-a parameter with the same name as the action. If that is not found, it
-looks for a parameter named "rcs_action" (substituting in the name of the
-revision control system and the action). The name of the revision control
-system is itself determined by running each defined "rcs_test" action,
-until one succeeds.
+Any parameter can be suffixed with C<_append>, to add an additional value
+to the existing value of the parameter. In this way, actions 
+can be constructed accumulatively.

 
 

-Internally, mr has settings for "git_update", "svn_update", etc. To change
-the action that is performed for a given revision control system, you can
-override these rcs specific actions. To add a new revision control system,
-you can just add rcs specific actions for it.
+=back

 
 =head1 UNTRUSTED MRCONFIG FILES
 
 Since mrconfig files can contain arbitrary shell commands, they can do
 anything. This flexibility is good, but it also allows a malicious mrconfig
 file to delete your whole home directory. Such a file might be contained
 
 =head1 UNTRUSTED MRCONFIG FILES
 
 Since mrconfig files can contain arbitrary shell commands, they can do
 anything. This flexibility is good, but it also allows a malicious mrconfig
 file to delete your whole home directory. Such a file might be contained

-inside a repository that your main ~/.mrconfig checks out. To
+inside a repository that your main F<~/.mrconfig> checks out. To

 avoid worries about evil commands in a mrconfig file, mr defaults to
 avoid worries about evil commands in a mrconfig file, mr defaults to

-reading all mrconfig files other than the main ~/.mrconfig in untrusted
+reading all mrconfig files other than the main F<~/.mrconfig> in untrusted

 mode. In untrusted mode, mrconfig files are limited to running only known
 safe commands (like "git clone") in a carefully checked manner.
 
 mode. In untrusted mode, mrconfig files are limited to running only known
 safe commands (like "git clone") in a carefully checked manner.
 

-To configure mr to trust other mrconfig files, list them in ~/.mrtrust.
+To configure mr to trust other mrconfig files, list them in F<~/.mrtrust>.

 One mrconfig file should be listed per line. Either the full pathname
 One mrconfig file should be listed per line. Either the full pathname

-should be listed, or the pathname can start with "~/" to specify a file
+should be listed, or the pathname can start with F<~/> to specify a file

 relative to your home directory.
 
 =head1 OFFLINE LOG FILE
 
 relative to your home directory.
 
 =head1 OFFLINE LOG FILE
 

-The ~/.mrlog file contains commands that mr has remembered to run later,
+The F<~/.mrlog> file contains commands that mr has remembered to run later,

 due to being offline. You can delete or edit this file to remove commands,
 or even to add other commands for 'mr online' to run. If the file is
 present, mr assumes it is in offline mode.
 due to being offline. You can delete or edit this file to remove commands,
 or even to add other commands for 'mr online' to run. If the file is
 present, mr assumes it is in offline mode.


@@ -445,7 +485,7 @@ present, mr assumes it is in offline mode.
 =head1 EXTENSIONS
 
 mr can be extended to support things such as unison and git-svn. Some
 =head1 EXTENSIONS
 
 mr can be extended to support things such as unison and git-svn. Some

-files providing such extensions are available in /usr/share/mr/. See
+files providing such extensions are available in F</usr/share/mr/>. See

 the documentation in the files for details about using them.
 
 =head1 EXIT STATUS
 the documentation in the files for details about using them.
 
 =head1 EXIT STATUS


@@ -499,41 +539,41 @@ my (@ok, @failed, @skipped);
 
 main();
 
 
 main();
 

-my %rcs;
-sub rcs_test {
+my %vcs;
+sub vcs_test {

        my ($action, $dir, $topdir, $subdir) = @_;
 
        my ($action, $dir, $topdir, $subdir) = @_;
 

-       if (exists $rcs{$dir}) {
-               return $rcs{$dir};
+       if (exists $vcs{$dir}) {
+               return $vcs{$dir};

        }
 
        my $test="set -e\n";
        }
 
        my $test="set -e\n";

-       foreach my $rcs_test (
+       foreach my $vcs_test (

                        sort {
                                length $a <=> length $b 
                                          ||
                                       $a cmp $b
                        } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
                        sort {
                                length $a <=> length $b 
                                          ||
                                       $a cmp $b
                        } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {

-               my ($rcs)=$rcs_test=~/(.*)_test/;
-               $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
-               $test.="if my_$rcs_test; then echo $rcs; fi\n";
+               my ($vcs)=$vcs_test=~/(.*)_test/;
+               $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test;
+               $test.="if my_$vcs_test; then echo $vcs; fi\n";

        }
        $test=$config{$topdir}{$subdir}{lib}."\n".$test
                if exists $config{$topdir}{$subdir}{lib};
        
        }
        $test=$config{$topdir}{$subdir}{lib}."\n".$test
                if exists $config{$topdir}{$subdir}{lib};
        

-       print "mr $action: running rcs test >>$test<<\n" if $verbose;
-       my $rcs=`$test`;
-       chomp $rcs;
-       if ($rcs=~/\n/s) {
-               $rcs=~s/\n/, /g;
-               print STDERR "mr $action: found multiple possible repository types ($rcs) for ".fulldir($topdir, $subdir)."\n";
+       print "mr $action: running vcs test >>$test<<\n" if $verbose;
+       my $vcs=`$test`;
+       chomp $vcs;
+       if ($vcs=~/\n/s) {
+               $vcs=~s/\n/, /g;
+               print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n";

                return undef;
        }
                return undef;
        }

-       if (! length $rcs) {
-               return $rcs{$dir}=undef;
+       if (! length $vcs) {
+               return $vcs{$dir}=undef;

        }
        else {
        }
        else {

-               return $rcs{$dir}=$rcs;
+               return $vcs{$dir}=$vcs;

        }
 }
        
        }
 }
        


@@ -548,11 +588,11 @@ sub findcommand {
                return undef;
        }
 
                return undef;
        }
 

-       my $rcs=rcs_test(@_);
+       my $vcs=vcs_test(@_);

 
 

-       if (defined $rcs && 
-           exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
-               return $config{$topdir}{$subdir}{$rcs."_".$action};
+       if (defined $vcs && 
+           exists $config{$topdir}{$subdir}{$vcs."_".$action}) {
+               return $config{$topdir}{$subdir}{$vcs."_".$action};

        }
        else {
                return undef;
        }
        else {
                return undef;


@@ -574,7 +614,8 @@ sub action {
        my $is_checkout=($action eq 'checkout');
        my $is_update=($action =~ /update/);
 
        my $is_checkout=($action eq 'checkout');
        my $is_update=($action =~ /update/);
 

-       $ENV{MR_REPO}=$dir;
+       ($ENV{MR_REPO}=$dir) =~ s!/$!!;
+       $ENV{MR_ACTION}=$action;

        
        foreach my $testname ("skip", "deleted") {
                my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
        
        foreach my $testname ("skip", "deleted") {
                my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);


@@ -635,13 +676,13 @@ sub action {
                return FAILED;
        }
        elsif (! defined $command) {
                return FAILED;
        }
        elsif (! defined $command) {

-               my $rcs=rcs_test(@_);
-               if (! defined $rcs) {
+               my $vcs=vcs_test(@_);
+               if (! defined $vcs) {

                        print STDERR "mr $action: unknown repository type and no defined $action command for $fulldir\n";
                        return FAILED;
                }
                else {
                        print STDERR "mr $action: unknown repository type and no defined $action command for $fulldir\n";
                        return FAILED;
                }
                else {

-                       print STDERR "mr $action: no defined action for $rcs repository $fulldir, skipping\n";
+                       print STDERR "mr $action: no defined action for $vcs repository $fulldir, skipping\n";

                        return SKIPPED;
                }
        }
                        return SKIPPED;
                }
        }


@@ -751,6 +792,9 @@ sub hook {
                        print STDERR "mr $hook: received signal ".($? & 127)."\n";
                        return ABORT;
                }
                        print STDERR "mr $hook: received signal ".($? & 127)."\n";
                        return ABORT;
                }

+               else {
+                       return FAILED;
+               }

        }
 
        return OK;
        }
 
        return OK;


@@ -914,7 +958,10 @@ sub repodir {
        return $ret;
 }
 
        return $ret;
 }
 

-# figure out which repos to act on
+# Figure out which repos to act on.  Returns a list of array refs
+# in the format:
+#
+#   [ "$full_repo_path/", "$mr_config_path/", $section_header ]

 sub selectrepos {
        my @repos;
        foreach my $repo (repolist()) {
 sub selectrepos {
        my @repos;
        foreach my $repo (repolist()) {


@@ -1059,7 +1106,7 @@ sub is_trusted_checkout {
                                        is_trusted_repo($words[$c])
                                );
                        }
                                        is_trusted_repo($words[$c])
                                );
                        }

-                       elsif (defined $words[$c] && $twords[$c] eq $words[$c]) {
+                       elsif (defined $words[$c] && $words[$c]=~/^($twords[$c])$/) {

                                $match=1;
                        }
                        else {
                                $match=1;
                        }
                        else {


@@ -1072,20 +1119,6 @@ sub is_trusted_checkout {
        return 0;
 }
 
        return 0;
 }
 

-sub trusterror {
-       my ($err, $file, $line, $url)=@_;
-       
-       if (defined $url) {
-               die "$err in untrusted $url line $line\n".
-                       "(To trust this url, --trust-all can be used; but please use caution;\n".
-                       "this can allow arbitrary code execution!)\n";
-       }
-       else {
-               die "$err in untrusted $file line $line\n".
-                       "(To trust this file, list it in ~/.mrtrust.)\n";
-       }
-}
-

 my %loaded;
 sub loadconfig {
        my $f=shift;
 my %loaded;
 sub loadconfig {
        my $f=shift;


@@ -1147,11 +1180,56 @@ sub loadconfig {
        close $in unless ref $f eq 'GLOB';
 
        my $section;
        close $in unless ref $f eq 'GLOB';
 
        my $section;

-       my $line=0;
+
+       # Keep track of the current line in the config file;
+       # when a file is included track the current line from the include.
+       my $lineno=0;
+       my $included=undef;
+
+       my $line;
+       my $nextline = sub {
+               if ($included) {
+                       $included--;
+               }
+               else {
+                       $included=undef;
+                       $lineno++;
+               }
+               $line=shift @lines;
+               chomp $line;
+               return $line;
+       };
+       my $lineerror = sub {
+               my $msg=shift;
+               if (defined $included) {
+                       die "mr: $msg at $f line $lineno, included line: $line\n";
+               }
+               else {
+                       die "mr: $msg at $f line $lineno\n";
+               }
+       };
+       my $trusterror = sub {
+               my $msg=shift;
+               my ($err, $file, $lineno, $url)=@_;
+       
+               if (defined $bootstrap_url) {
+                       die "mr: $err in untrusted $bootstrap_url line $lineno\n".
+                               "(To trust this url, --trust-all can be used; but please use caution;\n".
+                               "this can allow arbitrary code execution!)\n";
+               }
+               else {
+                       die "mr: $err in untrusted $file line $lineno\n".
+                               "(To trust this file, list it in ~/.mrtrust.)\n";
+               }
+       };
+

        while (@lines) {
        while (@lines) {

-               $_=shift @lines;
-               $line++;
-               chomp;
+               $_=$nextline->();
+
+               if (! $trusted && /[[:cntrl:]]/) {
+                       $trusterror->("illegal control character");
+               }
+

                next if /^\s*\#/ || /^\s*$/;
                if (/^\[([^\]]*)\]\s*$/) {
                        $section=$1;
                next if /^\s*\#/ || /^\s*$/;
                if (/^\[([^\]]*)\]\s*$/) {
                        $section=$1;


@@ -1160,7 +1238,7 @@ sub loadconfig {
                                if (! is_trusted_repo($section) ||
                                    $section eq 'ALIAS' ||
                                    $section eq 'DEFAULT') {
                                if (! is_trusted_repo($section) ||
                                    $section eq 'ALIAS' ||
                                    $section eq 'DEFAULT') {

-                                       trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url)
+                                       $trusterror->("illegal section \"[$section]\"");

                                }
                        }
                        $section=expandenv($section) if $trusted;
                                }
                        }
                        $section=expandenv($section) if $trusted;


@@ -1177,10 +1255,9 @@ sub loadconfig {
 
                        # continued value
                        while (@lines && $lines[0]=~/^\s(.+)/) {
 
                        # continued value
                        while (@lines && $lines[0]=~/^\s(.+)/) {

-                               shift(@lines);
-                               $line++;

                                $value.="\n$1";
                                chomp $value;
                                $value.="\n$1";
                                chomp $value;

+                               $nextline->();

                        }
 
                        if (! $trusted) {
                        }
 
                        if (! $trusted) {


@@ -1188,7 +1265,7 @@ sub loadconfig {
                                # settings in specific known-safe formats.
                                if ($parameter eq 'checkout') {
                                        if (! is_trusted_checkout($value)) {
                                # settings in specific known-safe formats.
                                if ($parameter eq 'checkout') {
                                        if (! is_trusted_checkout($value)) {

-                                               trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url);
+                                               $trusterror->("illegal checkout command \"$value\"");

                                        }
                                }
                                elsif ($parameter eq 'order') {
                                        }
                                }
                                elsif ($parameter eq 'order') {


@@ -1200,27 +1277,29 @@ sub loadconfig {
                                        # safe.
                                }
                                else {
                                        # safe.
                                }
                                else {

-                                       trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url);
+                                       $trusterror->("illegal setting \"$parameter=$value\"");

                                }
                        }
 
                        if ($parameter eq "include") {
                                print "mr: including output of \"$value\"\n" if $verbose;
                                }
                        }
 
                        if ($parameter eq "include") {
                                print "mr: including output of \"$value\"\n" if $verbose;

-                               unshift @lines, `$value`;
+                               my @inc=`$value`;

                                if ($?) {
                                        print STDERR "mr: include command exited nonzero ($?)\n";
                                }
                                if ($?) {
                                        print STDERR "mr: include command exited nonzero ($?)\n";
                                }

+                               $included += @inc;
+                               unshift @lines, @inc;

                                next;
                        }
 
                        if (! defined $section) {
                                next;
                        }
 
                        if (! defined $section) {

-                               die "$f line $.: parameter ($parameter) not in section\n";
+                               $lineerror->("parameter ($parameter) not in section");

                        }
                        if ($section eq 'ALIAS') {
                                $alias{$parameter}=$value;
                        }
                        }
                        if ($section eq 'ALIAS') {
                                $alias{$parameter}=$value;
                        }

-                       elsif ($parameter eq 'lib') {
-                               $config{$dir}{$section}{lib}.=$value."\n";
+                       elsif ($parameter eq 'lib' or $parameter =~ s/_append$//) {
+                               $config{$dir}{$section}{$parameter}.="\n".$value."\n";

                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;


@@ -1231,31 +1310,36 @@ sub loadconfig {
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&

-                                   length $dir && $section ne "DEFAULT" &&
-                                   -e $dir.$section."/.mrconfig") {
-                                       my $ret=system($value);
-                                       if ($ret != 0) {
-                                               if (($? & 127) == 2) {
-                                                       print STDERR "mr: chain test interrupted\n";
-                                                       exit 2;
+                                   length $dir && $section ne "DEFAULT") {
+                                       my $chaindir="$section";
+                                       if ($chaindir !~ m!^/!) {
+                                               $chaindir=$dir.$chaindir;
+                                       }
+                                       if (-e "$chaindir/.mrconfig") {
+                                               my $ret=system($value);
+                                               if ($ret != 0) {
+                                                       if (($? & 127) == 2) {
+                                                               print STDERR "mr: chain test interrupted\n";
+                                                               exit 2;
+                                                       }
+                                                       elsif ($? & 127) {
+                                                               print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                                       }

                                                }
                                                }

-                                               elsif ($? & 127) {
-                                                       print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                               else {
+                                                       push @toload, ["$chaindir/.mrconfig", $chaindir];

                                                }
                                        }
                                                }
                                        }

-                                       else {
-                                               push @toload, $dir.$section."/.mrconfig";
-                                       }

                                }
                        }
                }
                else {
                                }
                        }
                }
                else {

-                       die "$f line $line: parse error\n";
+                       $lineerror->("parse error");

                }
        }
 
                }
        }
 

-       foreach (@toload) {
-               loadconfig($_);
+       foreach my $c (@toload) {
+               loadconfig(@$c);

        }
 }
 
        }
 }
 


@@ -1691,6 +1775,13 @@ lib =
        is_bzr_checkout() {
                LANG=C bzr info | egrep -q '^Checkout'
        }
        is_bzr_checkout() {
                LANG=C bzr info | egrep -q '^Checkout'
        }

+       lazy() {
+               if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then
+                       return 1
+               else
+                       return 0
+               fi
+       }

 
 svn_test = test -d "$MR_REPO"/.svn
 git_test = test -d "$MR_REPO"/.git
 
 svn_test = test -d "$MR_REPO"/.svn
 git_test = test -d "$MR_REPO"/.git


@@ -1739,7 +1830,12 @@ darcs_commit = darcs record -a -m "$@" && darcs push -a
 fossil_commit = fossil commit "$@"
 
 git_record = git commit -a "$@"
 fossil_commit = fossil commit "$@"
 
 git_record = git commit -a "$@"

-bzr_record = bzr commit "$@"
+bzr_record =
+       if is_bzr_checkout; then
+               bzr commit --local "$@"
+       else
+               bzr commit "$@"
+       fi

 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"
 fossil_record = fossil commit "$@"
 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"
 fossil_record = fossil commit "$@"


@@ -1791,7 +1887,7 @@ bzr_register =
                error "cannot determine bzr url"
        fi
        echo "Registering bzr url: $url in $MR_CONFIG"
                error "cannot determine bzr url"
        fi
        echo "Registering bzr url: $url in $MR_CONFIG"

-       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr branch '$url' '$MR_REPO'"

 cvs_register =
        repo=`cat CVS/Repository`
        root=`cat CVS/Root`
 cvs_register =
        repo=`cat CVS/Repository`
        root=`cat CVS/Root`


@@ -1824,7 +1920,7 @@ fossil_register =
 svn_trusted_checkout = svn co $url $repo
 svn_alt_trusted_checkout = svn checkout $url $repo
 git_trusted_checkout = git clone $url $repo
 svn_trusted_checkout = svn co $url $repo
 svn_alt_trusted_checkout = svn checkout $url $repo
 git_trusted_checkout = git clone $url $repo

-bzr_trusted_checkout = bzr clone $url $repo
+bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo

 # cvs: too hard
 hg_trusted_checkout = hg clone $url $repo
 darcs_trusted_checkout = darcs get $url $repo
 # cvs: too hard
 hg_trusted_checkout = hg clone $url $repo
 darcs_trusted_checkout = darcs get $url $repo


@@ -1885,3 +1981,7 @@ T = echo "I pity the fool."
 right = echo "Not found."
 
 # vim:sw=8:sts=0:ts=8:noet
 right = echo "Not found."
 
 # vim:sw=8:sts=0:ts=8:noet

+# Local variables:
+# indent-tabs-mode: t
+# cperl-indent-level: 8
+# End: