B<mr> [options] commit [-m "message"]
+B<mr> [options] record [-m "message"]
+
B<mr> [options] diff
B<mr> [options] log
B<mr> is a Multiple Repository management tool. It can checkout, update, or
perform other actions on a set of repositories as if they were one combined
-respository. It supports any combination of subversion, git, cvs, mecurial and
-bzr repositories, and support for other revision control systems can easily be
-added.
+repository. It supports any combination of subversion, git, cvs, mecurial,
+bzr and darcs repositories, and support for other revision control systems can
+easily be added.
B<mr> cds into and operates on all registered repositories at or below your
working directory. Or, if you are in a subdirectory of a repository that
=item commit (or ci)
Commits changes to each repository. (By default, changes are pushed to the
-remote repository too, when using distributed systems like git.)
+remote repository too, when using distributed systems like git. If you
+don't like this default, you can change it in your .mrconfig, or use record
+instead.)
+
+The optional -m parameter allows specifying a commit message.
+
+=item record
+
+Records changes to the local repository, but does not push them to the
+remote repository. Only supported for distributed revision control systems.
The optional -m parameter allows specifying a commit message.
=back
-Actions can be abbreviated to any unambiguous subsctring, so
-"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr
+Actions can be abbreviated to any unambiguous substring, so
+"mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr
update"
Additional parameters can be passed to most commands, and are passed on
Be verbose.
+=item -q
+
+Be quiet.
+
=item -s
Expand the statistics line displayed at the end to include information
about exactly which repositories failed and were skipped, if any.
-=item -n
+=item -n [number]
-Just operate on the repository for the current directory, do not
-recurse into deeper repositories.
+If no number if specified, just operate on the repository for the current
+directory, do not recurse into deeper repositories.
-=item -j number
+If a number is specified, will recurse into repositories at most that many
+subdirectories deep. For example, with -n 2 it would recurse into ./src/foo,
+but not ./src/packages/bar.
-Run the specified number of jobs in parallel. This can greatly speed up
-operations such as updates.
+=item -j [number]
-Note that in -j mode, all output of the jobs goes to standard output, even
-output that would normally go to standard error.
+Run the specified number of jobs in parallel, or an unlimited number of jobs
+with no number specified. This can greatly speed up operations such as updates.
+It is not recommended for interactive operations.
+
+Note that running more than 10 jobs at a time is likely to run afoul of
+ssh connection limits. Running between 3 and 5 jobs at a time will yeild
+a good speedup in updates without loading the machine too much.
=back
are run inside the repository, though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the
-repository. The "MR_CONFIG" environment variable is set to the .mrconfig file
+repository. (For the "register" action, "MR_REPO" is instead set to the
+basename of the directory that should be created when checking the
+repository out.)
+
+The "MR_CONFIG" environment variable is set to the .mrconfig file
that defines the repo being acted on, or, if the repo is not yet in a config
file, the .mrconfig file that should be modified to register the repo.
(included in mr's built-in library) to skip updating the repo unless it's
been at least 12 hours since the last update.
- skip = test $(whoami) != joey
- skip = [ "$1" = update ] && [ $(hours_since "$1") -lt 12 ]
+ skip = test `whoami` != joey
+ skip = [ "$1" = update ] && ! hours_since "$1" 12
+
+=item order
+
+The "order" parameter can be used to override the default ordering of
+repositories. The default order value is 10. Use smaller values to make
+repositories be processed earlier, and larger values to make repositories
+be processed later.
+
+Note that if a repository is located in a subdirectory of another
+repository, ordering it to be processed earlier is not recommended.
=item chain
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
=item lib
The "lib" parameter can specify some shell code that will be run before each
=back
+When looking for a command to run for a given action, mr first looks for
+a parameter with the same name as the action. If that is not found, it
+looks for a parameter named "rcs_action" (substituting in the name of the
+revision control system and the action). The name of the revision control
+system is itself determined by running each defined "rcs_test" action,
+until one succeeds.
+
+Internally, mr has settings for "git_update", "svn_update", etc. To change
+the action that is performed for a given revision control system, you can
+override these rcs specific actions. To add a new revision control system,
+you can just add rcs specific actions for it.
+
=head1 AUTHOR
Copyright 2007 Joey Hess <joey@kitenet.net>
use strict;
use Getopt::Long;
use Cwd qw(getcwd abs_path);
-use POSIX "WNOHANG";
+
+# things that can happen when mr runs a command
use constant {
OK => 0,
FAILED => 1,
ABORT => 3,
};
-$SIG{INT}=sub {
- print STDERR "mr: interrupted\n";
- exit 2;
-};
-
-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+# configurables
my $config_overridden=0;
-my $directory=getcwd();
my $verbose=0;
+my $quiet=0;
my $stats=0;
-my $no_recurse=0;
+my $max_depth;
+my $no_chdir=0;
my $jobs=1;
+my $directory=getcwd();
+$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+# globals :-(
my %config;
my %configfiles;
my %knownactions;
my %alias;
+my (@ok, @failed, @skipped);
-Getopt::Long::Configure("no_permute");
-my $result=GetOptions(
- "d|directory=s" => sub { $directory=abs_path($_[1]) },
- "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
- "v|verbose" => \$verbose,
- "s|stats" => \$stats,
- "n|no-recurse" => \$no_recurse,
- "j|jobs=i" => \$jobs,
-);
-if (! $result || @ARGV < 1) {
- die("Usage: mr [-d directory] action [params ...]\n".
- "(Use mr help for man page.)\n");
-
-}
-
-# Make sure MR_CONFIG is an absolute path, but don't use abs_path since
-# the config file might be a symlink to elsewhere, and the directory it's
-# in is significant.
-if ($ENV{MR_CONFIG} !~ /^\//) {
- $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
-}
-# Try to set MR_PATH to the path to the program.
-eval {
- use FindBin qw($Bin $Script);
- $ENV{MR_PATH}=$Bin."/".$Script;
-};
+main();
-loadconfig(\*DATA);
-loadconfig($ENV{MR_CONFIG});
-#use Data::Dumper;
-#print Dumper(\%config);
+my %rcs;
+sub rcs_test { #{{{
+ my ($action, $dir, $topdir, $subdir) = @_;
-# alias expansion and command stemming
-my $action=shift @ARGV;
-if (exists $alias{$action}) {
- $action=$alias{$action};
-}
-if (! exists $knownactions{$action}) {
- my @matches = grep { /^\Q$action\E/ }
- keys %knownactions, keys %alias;
- if (@matches == 1) {
- $action=$matches[0];
- }
- elsif (@matches == 0) {
- die "mr: unknown action \"$action\" (known actions: ".
- join(", ", sort keys %knownactions).")\n";
+ if (exists $rcs{$dir}) {
+ return $rcs{$dir};
}
- else {
- die "mr: ambiguous action \"$action\" (matches: ".
- join(", ", @matches).")\n";
+
+ my $test="set -e\n";
+ foreach my $rcs_test (
+ sort {
+ length $a <=> length $b
+ ||
+ $a cmp $b
+ } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
+ my ($rcs)=$rcs_test=~/(.*)_test/;
+ $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
+ $test.="if my_$rcs_test; then echo $rcs; fi\n";
}
-}
-
-# commands that do not operate on all repos
-if ($action eq 'help') {
- exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
-}
-elsif ($action eq 'config') {
- if (@ARGV < 2) {
- die "mr config: not enough parameters\n";
+ $test=$config{$topdir}{$subdir}{lib}."\n".$test
+ if exists $config{$topdir}{$subdir}{lib};
+
+ print "mr $action: running rcs test >>$test<<\n" if $verbose;
+ my $rcs=`$test`;
+ chomp $rcs;
+ if ($rcs=~/\n/s) {
+ $rcs=~s/\n/, /g;
+ print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n";
+ return undef;
}
- my $section=shift;
- if ($section=~/^\//) {
- # try to convert to a path relative to the config file
- my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
- $dir=abs_path($dir);
- $dir.="/" unless $dir=~/\/$/;
- if ($section=~/^\Q$dir\E(.*)/) {
- $section=$1;
- }
+ if (! length $rcs) {
+ return $rcs{$dir}=undef;
}
- my %changefields;
- foreach (@ARGV) {
- if (/^([^=]+)=(.*)$/) {
- $changefields{$1}=$2;
- }
- else {
- my $found=0;
- foreach my $topdir (sort keys %config) {
- if (exists $config{$topdir}{$section} &&
- exists $config{$topdir}{$section}{$_}) {
- print $config{$topdir}{$section}{$_}."\n";
- $found=1;
- last if $section eq 'DEFAULT';
- }
- }
- if (! $found) {
- die "mr $action: $section $_ not set\n";
- }
- }
+ else {
+ return $rcs{$dir}=$rcs;
}
- modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
- exit 0;
-}
-elsif ($action eq 'register') {
- if (! $config_overridden) {
- # Find the closest known mrconfig file to the current
- # directory.
- $directory.="/" unless $directory=~/\/$/;
- foreach my $topdir (reverse sort keys %config) {
- next unless length $topdir;
- if ($directory=~/^\Q$topdir\E/) {
- $ENV{MR_CONFIG}=$configfiles{$topdir};
- last;
- }
- }
+} #}}}
+
+sub findcommand { #{{{
+ my ($action, $dir, $topdir, $subdir, $is_checkout) = @_;
+
+ if (exists $config{$topdir}{$subdir}{$action}) {
+ return $config{$topdir}{$subdir}{$action};
}
- my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
- "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
- join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print STDERR "mr $action: running >>$command<<\n" if $verbose;
- exec($command) || die "exec: $!";
-}
-# work out what repos to act on
-my @repos;
-my $nochdir=0;
-foreach my $topdir (sort keys %config) {
- foreach my $subdir (sort keys %{$config{$topdir}}) {
- next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
- my $d=$directory;
- $dir.="/" unless $dir=~/\/$/;
- $d.="/" unless $d=~/\/$/;
- next if $no_recurse && $d ne $dir;
- next if $dir ne $d && $dir !~ /^\Q$d\E/;
- push @repos, [$dir, $topdir, $subdir];
- }
-}
-if (! @repos) {
- # fallback to find a leaf repo
- LEAF: foreach my $topdir (reverse sort keys %config) {
- foreach my $subdir (reverse sort keys %{$config{$topdir}}) {
- next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
- my $d=$directory;
- $dir.="/" unless $dir=~/\/$/;
- $d.="/" unless $d=~/\/$/;
- if ($d=~/^\Q$dir\E/) {
- push @repos, [$dir, $topdir, $subdir];
- last LEAF;
- }
- }
+ if ($is_checkout) {
+ return undef;
}
- $nochdir=1;
-}
-# run the action on each repository and print stats
-my (@ok, @failed, @skipped);
-if ($jobs > 1) {
- mrs(@repos);
-}
-else {
- foreach my $repo (@repos) {
- record($repo, action($action, @$repo));
- }
-}
-if (! @ok && ! @failed && ! @skipped) {
- die "mr $action: no repositories found to work on\n";
-}
-print "mr $action: finished (".join("; ",
- showstat($#ok+1, "ok", "ok"),
- showstat($#failed+1, "failed", "failed"),
- showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-if ($stats) {
- if (@skipped) {
- print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+ my $rcs=rcs_test(@_);
+
+ if (defined $rcs &&
+ exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
+ return $config{$topdir}{$subdir}{$rcs."_".$action};
}
- if (@failed) {
- print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ else {
+ return undef;
}
-}
-if (@failed) {
- exit 1;
-}
-elsif (! @ok && @skipped) {
- exit 1;
-}
-exit 0;
+} #}}}
sub action { #{{{
my ($action, $dir, $topdir, $subdir) = @_;
$ENV{MR_CONFIG}=$configfiles{$topdir};
my $lib=exists $config{$topdir}{$subdir}{lib} ?
$config{$topdir}{$subdir}{lib}."\n" : "";
+ my $is_checkout=($action eq 'checkout');
- if ($action eq 'checkout') {
+ if ($is_checkout) {
if (-d $dir) {
print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
return SKIPPED;
}
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
-
- if (! -d $dir) {
- print "mr $action: creating parent directory $dir\n" if $verbose;
- system("mkdir", "-p", $dir);
- }
}
- elsif ($action eq 'update') {
+ elsif ($action =~ /update/) {
if (! -d $dir) {
return action("checkout", $dir, $topdir, $subdir);
}
}
-
+
$ENV{MR_REPO}=$dir;
- if (exists $config{$topdir}{$subdir}{skip}) {
+ my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);
+ my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
+
+ if (defined $skiptest) {
my $test="set -e;".$lib.
- "my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
+ "my_action(){ $skiptest\n }; my_action '$action'";
print "mr $action: running skip test >>$test<<\n" if $verbose;
my $ret=system($test);
if ($ret != 0) {
return SKIPPED;
}
}
-
- if (! $nochdir && ! chdir($dir)) {
+
+ if ($is_checkout && ! -d $dir) {
+ print "mr $action: creating parent directory $dir\n" if $verbose;
+ system("mkdir", "-p", $dir);
+ }
+
+ if (! $no_chdir && ! chdir($dir)) {
print STDERR "mr $action: failed to chdir to $dir: $!\n";
return FAILED;
}
- elsif (! exists $config{$topdir}{$subdir}{$action}) {
- print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
- return SKIPPED;
+ elsif (! defined $command) {
+ my $rcs=rcs_test(@_);
+ if (! defined $rcs) {
+ print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n";
+ return FAILED;
+ }
+ else {
+ print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n";
+ return SKIPPED;
+ }
}
else {
- if (! $nochdir) {
- print "mr $action: $topdir$subdir\n";
+ if (! $no_chdir) {
+ print "mr $action: $topdir$subdir\n" unless $quiet;
}
else {
- print "mr $action: $topdir$subdir (in subdir $directory)\n";
+ my $s=$directory;
+ $s=~s/^\Q$topdir$subdir\E\/?//;
+ print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet;
}
- my $command="set -e; ".$lib.
- "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ".
+ $command="set -e; ".$lib.
+ "my_action(){ $command\n }; my_action ".
join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print STDERR "mr $action: running >>$command<<\n" if $verbose;
+ print "mr $action: running >>$command<<\n" if $verbose;
my $ret=system($command);
- print "\n";
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
} #}}}
# run actions on multiple repos, in parallel
-my %jobs;
sub mrs { #{{{
+ my $action=shift;
+ my @repos=@_;
+
$| = 1;
+ my @active;
my @fhs;
my @out;
my $running=0;
while (@fhs or @repos) {
- while ($running < $jobs && @repos) {
- $SIG{CHLD}='DEFAULT';
+ while ((!$jobs || $running < $jobs) && @repos) {
$running++;
my $repo = shift @repos;
- my $pid = open(my $fh, "-|");
- if (! $pid) {
- open(STDERR, ">&STDOUT");
+ pipe(my $outfh, CHILD_STDOUT);
+ pipe(my $errfh, CHILD_STDERR);
+ my $pid;
+ unless ($pid = fork) {
+ die "mr $action: cannot fork: $!" unless defined $pid;
+ open(STDOUT, ">&CHILD_STDOUT") || die "mr $action cannot reopen stdout: $!";
+ open(STDERR, ">&CHILD_STDERR") || die "mr $action cannot reopen stderr: $!";
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ close $outfh;
+ close $errfh;
exit action($action, @$repo);
}
- $jobs{$pid}=$repo;
- push @fhs, $fh;
- push @out, "";
- reaper();
- $SIG{CHLD}=\&reaper;
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ push @active, [$pid, $repo];
+ push @fhs, [$outfh, $errfh];
+ push @out, ['', ''];
}
- my ($rin, $rout) = ('','', '');
+ my ($rin, $rout) = ('','');
my $nfound;
- foreach my $x (@fhs) {
- next unless defined $x;
- vec($rin, fileno($x), 1) = 1;
+ foreach my $fh (@fhs) {
+ next unless defined $fh;
+ vec($rin, fileno($fh->[0]), 1) = 1 if defined $fh->[0];
+ vec($rin, fileno($fh->[1]), 1) = 1 if defined $fh->[1];
}
$nfound = select($rout=$rin, undef, undef, 1);
- foreach my $i (0..$#fhs) {
- my $fh = $fhs[$i];
- next unless defined $fh;
- if (vec($rout, fileno($fh), 1) == 1) {
- my $r = '';
- if (sysread($fh, $r, 1024) == 0) {
- close($fh);
- $fhs[$i] = undef;
- $running--;
- print $out[$i];
- $out[$i]='';
+ foreach my $channel (0, 1) {
+ foreach my $i (0..$#fhs) {
+ next unless defined $fhs[$i];
+ my $fh = $fhs[$i][$channel];
+ next unless defined $fh;
+ if (vec($rout, fileno($fh), 1) == 1) {
+ my $r = '';
+ if (sysread($fh, $r, 1024) == 0) {
+ close($fh);
+ $fhs[$i][$channel] = undef;
+ if (! defined $fhs[$i][0] &&
+ ! defined $fhs[$i][1]) {
+ waitpid($active[$i][0], 0);
+ print STDOUT $out[$i][0];
+ print STDERR $out[$i][1];
+ record($active[$i][1], $? >> 8);
+ splice(@fhs, $i, 1);
+ splice(@active, $i, 1);
+ splice(@out, $i, 1);
+ $running--;
+ }
+ }
+ $out[$i][$channel] .= $r;
}
- $out[$i] .= $r;
}
}
- while (@fhs and !defined $fhs[0]) {
- shift @fhs;
- shift @out;
- }
}
} #}}}
-sub reaper { #{{{
- while ((my $pid = waitpid(-1, &WNOHANG)) > 0) {
- record($jobs{$pid}, $? >> 8) if exists $jobs{$pid};
- }
-} #}}}
-
sub record { #{{{
my $dir=shift()->[0];
my $ret=shift;
if ($ret == OK) {
push @ok, $dir;
+ print "\n";
}
elsif ($ret == FAILED) {
push @failed, $dir;
+ print "\n";
}
elsif ($ret == SKIPPED) {
push @skipped, $dir;
}
} #}}}
+sub showstats { #{{{
+ my $action=shift;
+ if (! @ok && ! @failed && ! @skipped) {
+ die "mr $action: no repositories found to work on\n";
+ }
+ print "mr $action: finished (".join("; ",
+ showstat($#ok+1, "ok", "ok"),
+ showstat($#failed+1, "failed", "failed"),
+ showstat($#skipped+1, "skipped", "skipped"),
+ ).")\n" unless $quiet;
+ if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet;
+ }
+ if (@failed) {
+ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+ }
+} #}}}
+
sub showstat { #{{{
my $count=shift;
my $singular=shift;
return;
} #}}}
+# an ordered list of repos
+sub repolist { #{{{
+ my @list;
+ foreach my $topdir (sort keys %config) {
+ foreach my $subdir (sort keys %{$config{$topdir}}) {
+ push @list, {
+ topdir => $topdir,
+ subdir => $subdir,
+ order => $config{$topdir}{$subdir}{order},
+ };
+ }
+ }
+ return sort {
+ $a->{order} <=> $b->{order}
+ ||
+ $a->{topdir} cmp $b->{topdir}
+ ||
+ $a->{subdir} cmp $b->{subdir}
+ } @list;
+} #}}}
+
+# figure out which repos to act on
+sub selectrepos { #{{{
+ my @repos;
+ foreach my $repo (repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ next if $dir ne $d && $dir !~ /^\Q$d\E/;
+ if (defined $max_depth) {
+ my @a=split('/', $dir);
+ my @b=split('/', $d);
+ do { } while (@a && @b && shift(@a) eq shift(@b));
+ next if @a > $max_depth || @b > $max_depth;
+ }
+ push @repos, [$dir, $topdir, $subdir];
+ }
+ if (! @repos) {
+ # fallback to find a leaf repo
+ foreach my $repo (reverse repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ if ($d=~/^\Q$dir\E/) {
+ push @repos, [$dir, $topdir, $subdir];
+ last;
+ }
+ }
+ $no_chdir=1;
+ }
+ return @repos;
+} #}}}
+
my %loaded;
sub loadconfig { #{{{
my $f=shift;
chomp $value;
}
+ if ($parameter eq "include") {
+ print "mr: including output of \"$value\"\n" if $verbose;
+ unshift @lines, `$value`;
+ next;
+ }
+
if (! defined $section) {
die "$f line $.: parameter ($parameter) not in section\n";
}
}
else {
$config{$dir}{$section}{$parameter}=$value;
- $knownactions{$parameter}=1;
+ if ($parameter =~ /.*_(.*)/) {
+ $knownactions{$1}=1;
+ }
+ else {
+ $knownactions{$parameter}=1;
+ }
if ($parameter eq 'chain' &&
length $dir && $section ne "DEFAULT" &&
-e $dir.$section."/.mrconfig") {
my $ret=system($value);
if ($ret != 0) {
if (($? & 127) == 2) {
- print STDERR "mr $action: chain test interrupted\n";
+ print STDERR "mr: chain test interrupted\n";
exit 2;
}
elsif ($? & 127) {
- print STDERR "mr $action: chain test received signal ".($? & 127)."\n";
+ print STDERR "mr: chain test received signal ".($? & 127)."\n";
}
}
else {
close $out;
} #}}}
+sub dispatch { #{{{
+ my $action=shift;
+
+ # actions that do not operate on all repos
+ if ($action eq 'help') {
+ help(@ARGV);
+ }
+ elsif ($action eq 'config') {
+ config(@ARGV);
+ }
+ elsif ($action eq 'register') {
+ register(@ARGV);
+ }
+
+ if (!$jobs || $jobs > 1) {
+ mrs($action, selectrepos());
+ }
+ else {
+ foreach my $repo (selectrepos()) {
+ record($repo, action($action, @$repo));
+ }
+ }
+} #}}}
+
+sub help { #{{{
+ exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+} #}}}
+
+sub config { #{{{
+ if (@_ < 2) {
+ die "mr config: not enough parameters\n";
+ }
+ my $section=shift;
+ if ($section=~/^\//) {
+ # try to convert to a path relative to the config file
+ my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
+ $dir=abs_path($dir);
+ $dir.="/" unless $dir=~/\/$/;
+ if ($section=~/^\Q$dir\E(.*)/) {
+ $section=$1;
+ }
+ }
+ my %changefields;
+ foreach (@_) {
+ if (/^([^=]+)=(.*)$/) {
+ $changefields{$1}=$2;
+ }
+ else {
+ my $found=0;
+ foreach my $topdir (sort keys %config) {
+ if (exists $config{$topdir}{$section} &&
+ exists $config{$topdir}{$section}{$_}) {
+ print $config{$topdir}{$section}{$_}."\n";
+ $found=1;
+ last if $section eq 'DEFAULT';
+ }
+ }
+ if (! $found) {
+ die "mr config: $section $_ not set\n";
+ }
+ }
+ }
+ modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
+ exit 0;
+} #}}}
+
+sub register { #{{{
+ if (! $config_overridden) {
+ # Find the closest known mrconfig file to the current
+ # directory.
+ $directory.="/" unless $directory=~/\/$/;
+ my $foundconfig=0;
+ foreach my $topdir (reverse sort keys %config) {
+ next unless length $topdir;
+ if ($directory=~/^\Q$topdir\E/) {
+ $ENV{MR_CONFIG}=$configfiles{$topdir};
+ $directory=$topdir;
+ $foundconfig=1;
+ last;
+ }
+ }
+ if (! $foundconfig) {
+ $directory=""; # no config file, use builtin
+ }
+ }
+ if (@ARGV) {
+ my $subdir=shift @ARGV;
+ if (! chdir($subdir)) {
+ print STDERR "mr register: failed to chdir to $subdir: $!\n";
+ }
+ }
+
+ $ENV{MR_REPO}=getcwd();
+ my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT', 0);
+ if (! defined $command) {
+ die "mr register: unknown repository type\n";
+ }
+
+ $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+ $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+ "my_action(){ $command\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print "mr register: running >>$command<<\n" if $verbose;
+ exec($command) || die "exec: $!";
+} #}}}
+
+# alias expansion and command stemming
+sub expandaction { #{{{
+ my $action=shift;
+ if (exists $alias{$action}) {
+ $action=$alias{$action};
+ }
+ if (! exists $knownactions{$action}) {
+ my @matches = grep { /^\Q$action\E/ }
+ keys %knownactions, keys %alias;
+ if (@matches == 1) {
+ $action=$matches[0];
+ }
+ elsif (@matches == 0) {
+ die "mr: unknown action \"$action\" (known actions: ".
+ join(", ", sort keys %knownactions).")\n";
+ }
+ else {
+ die "mr: ambiguous action \"$action\" (matches: ".
+ join(", ", @matches).")\n";
+ }
+ }
+ return $action;
+} #}}}
+
+sub getopts { #{{{
+ Getopt::Long::Configure("bundling", "no_permute");
+ my $result=GetOptions(
+ "d|directory=s" => sub { $directory=abs_path($_[1]) },
+ "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
+ "v|verbose" => \$verbose,
+ "q|quiet" => \$quiet,
+ "s|stats" => \$stats,
+ "n|no-recurse:i" => \$max_depth,
+ "j|jobs:i" => \$jobs,
+ );
+ if (! $result || @ARGV < 1) {
+ die("Usage: mr [-d directory] action [params ...]\n".
+ "(Use mr help for man page.)\n");
+ }
+} #}}}
+
+sub init { #{{{
+ $SIG{INT}=sub {
+ print STDERR "mr: interrupted\n";
+ exit 2;
+ };
+
+ # This can happen if it's run in a directory that was removed
+ # or other strangeness.
+ if (! defined $directory) {
+ die("mr: failed to determine working directory\n");
+ }
+ # Make sure MR_CONFIG is an absolute path, but don't use abs_path since
+ # the config file might be a symlink to elsewhere, and the directory it's
+ # in is significant.
+ if ($ENV{MR_CONFIG} !~ /^\//) {
+ $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
+ }
+ # Try to set MR_PATH to the path to the program.
+ eval {
+ use FindBin qw($Bin $Script);
+ $ENV{MR_PATH}=$Bin."/".$Script;
+ };
+} #}}}
+
+sub main { #{{{
+ getopts();
+ init();
+ loadconfig(\*DATA);
+ loadconfig($ENV{MR_CONFIG});
+ #use Data::Dumper; print Dumper(\%config);
+
+ my $action=expandaction(shift @ARGV);
+ dispatch($action);
+ showstats($action);
+
+ if (@failed) {
+ exit 1;
+ }
+ elsif (! @ok && @skipped) {
+ exit 1;
+ }
+ else {
+ exit 0;
+ }
+} #}}}
+
# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
#DATA{{{
ls = list
[DEFAULT]
+order = 10
lib =
error() {
echo "mr: $@" >&2
exit 1
}
+ warning() {
+ echo "mr (warning): $@" >&2
+ }
+ info() {
+ echo "mr: $@" >&2
+ }
hours_since() {
- for dir in .git .svn .bzr CVS .hg; do
+ if [ -z "$1" ] || [ -z "$2" ]; then
+ error "mr: usage: hours_since action num"
+ fi
+ for dir in .git .svn .bzr CVS .hg _darcs; do
if [ -e "$MR_REPO/$dir" ]; then
flagfile="$MR_REPO/$dir/.mr_last$1"
break
if [ -z "$flagfile" ]; then
error "cannot determine flag filename"
fi
- perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"
- touch "$flagfile"
- }
-
-update =
- if [ -d "$MR_REPO"/.svn ]; then
- svn update "$@"
- elif [ -d "$MR_REPO"/.git ]; then
- if [ -z "$@" ]; then
- git pull -t origin master
+ delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
+ if [ "$delta" -lt "$2" ]; then
+ exit 0
else
- git pull "$@"
+ touch "$flagfile"
+ exit 1
fi
- elif [ -d "$MR_REPO"/.bzr ]; then
- bzr merge "$@"
- elif [ -d "$MR_REPO"/CVS ]; then
- cvs update "$@"
- elif [ -d "$MR_REPO"/.hg ]; then
- hg pull "$@" && hg update "$@"
+ }
+
+svn_test = test -d "$MR_REPO"/.svn
+git_test = test -d "$MR_REPO"/.git
+bzr_test = test -d "$MR_REPO"/.bzr
+cvs_test = test -d "$MR_REPO"/CVS
+hg_test = test -d "$MR_REPO"/.hg
+darcs_test = test -d "$MR_REPO"/_darcs
+git_bare_test =
+ test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
+ test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
+ test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true
+
+svn_update = svn update "$@"
+git_update =
+ if [ "$@" ]; then
+ git pull "$@"
else
- error "unknown repo type"
+ git pull
fi
-status =
- if [ -d "$MR_REPO"/.svn ]; then
- svn status "$@"
- elif [ -d "$MR_REPO"/.git ]; then
- git status "$@" || true
- elif [ -d "$MR_REPO"/.bzr ]; then
- bzr status "$@"
- elif [ -d "$MR_REPO"/CVS ]; then
- cvs status "$@"
- elif [ -d "$MR_REPO"/.hg ]; then
- hg status "$@"
- else
- error "unknown repo type"
+bzr_update = bzr merge "$@"
+cvs_update = cvs update "$@"
+hg_update = hg pull "$@" && hg update "$@"
+darcs_update = darcs pull -a "$@"
+
+svn_status = svn status "$@"
+git_status = git status "$@" || true
+bzr_status = bzr status "$@"
+cvs_status = cvs status "$@"
+hg_status = hg status "$@"
+darcs_status = darcs whatsnew -ls "$@"
+
+svn_commit = svn commit "$@"
+git_commit = git commit -a "$@" && git push --all
+bzr_commit = bzr commit "$@" && bzr push
+cvs_commit = cvs commit "$@"
+hg_commit = hg commit -m "$@" && hg push
+darcs_commit = darcs record -a -m "$@" && darcs push -a
+
+git_record = git commit -a "$@"
+bzr_record = bzr commit "$@"
+hg_record = hg commit -m "$@"
+darcs_record = darcs record -a -m "$@"
+
+svn_diff = svn diff "$@"
+git_diff = git diff "$@"
+bzr_diff = bzr diff "$@"
+cvs_diff = cvs diff "$@"
+hg_diff = hg diff "$@"
+darcs_diff = darcs diff -u "$@"
+
+svn_log = svn log "$@"
+git_log = git log "$@"
+bzr_log = bzr log "$@"
+cvs_log = cvs log "$@"
+hg_log = hg log "$@"
+darcs_log = darcs changes "$@"
+git_bare_log = git log "$@"
+
+svn_register =
+ url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`
+ if [ -z "$url" ]; then
+ error "cannot determine svn url"
fi
-commit =
- if [ -d "$MR_REPO"/.svn ]; then
- svn commit "$@"
- elif [ -d "$MR_REPO"/.git ]; then
- git commit -a "$@" && git push --all
- elif [ -d "$MR_REPO"/.bzr ]; then
- bzr commit "$@" && bzr push
- elif [ -d "$MR_REPO"/CVS ]; then
- cvs commit "$@"
- elif [ -d "$MR_REPO"/.hg ]; then
- hg commit -m "$@" && hg push
- else
- error "unknown repo type"
+ echo "Registering svn url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
+git_register =
+ url="`LC_ALL=C git config --get remote.origin.url`" || true
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
fi
-diff =
- if [ -d "$MR_REPO"/.svn ]; then
- svn diff "$@"
- elif [ -d "$MR_REPO"/.git ]; then
- git diff "$@"
- elif [ -d "$MR_REPO"/.bzr ]; then
- bzr diff "$@"
- elif [ -d "$MR_REPO"/CVS ]; then
- cvs diff "$@"
- elif [ -d "$MR_REPO"/.hg ]; then
- hg diff "$@"
- else
- error "unknown repo type"
+ echo "Registering git url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
+bzr_register =
+ url=`cat .bzr/branch/parent`
+ if [ -z "$url" ]; then
+ error "cannot determine bzr url"
fi
-log =
- if [ -d "$MR_REPO"/.svn ]; then
- svn log"$@"
- elif [ -d "$MR_REPO"/.git ]; then
- git log "$@"
- elif [ -d "$MR_REPO"/.bzr ]; then
- bzr log "$@"
- elif [ -d "$MR_REPO"/CVS ]; then
- cvs log "$@"
- elif [ -d "$MR_REPO"/.hg ]; then
- hg log "$@"
- else
- error "unknown repo type"
- fi
-register =
- if [ -n "$1" ]; then
- cd "$1"
- fi
- basedir="$(basename $(pwd))"
- if [ -d .svn ]; then
- url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
- if [ -z "$url" ]; then
- error "cannot determine svn url"
- fi
- echo "Registering svn url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "$(pwd)" checkout="svn co $url $basedir"
- elif [ -d .git ]; then
- url=$(LANG=C git-config --get remote.origin.url)
- if [ -z "$url" ]; then
- error "cannot determine git url"
- fi
- echo "Registering git url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "$(pwd)" checkout="git clone $url $basedir"
- elif [ -d .bzr ]; then
- url=$(cat .bzr/branch/parent)
- if [ -z "$url" ]; then
- error "cannot determine bzr url"
+ echo "Registering bzr url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+cvs_register =
+ repo=`cat CVS/Repository`
+ root=`cat CVS/Root`
+ if [ -z "$root" ]; then
+ error "cannot determine cvs root"
fi
- echo "Registering bzr url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "$(pwd)" checkout="bzr clone $url $basedir"
- elif [ -d CVS ]; then
- repo=$(cat CVS/Repository)
- root=$(cat CVS/Root)
- if [ -z "$root" ]; then
- error "cannot determine cvs root"
- fi
- echo "Registering cvs repository $repo at root $root"
- mr -c "$MR_CONFIG" config "$(pwd)" \
- checkout="cvs -d '$root' co -d $basedir $repo"
- elif [ -d .hg ]; then
- url=$(hg showconfig paths.default)
- echo "Registering mercurial repo url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "$(pwd)" \
- checkout="hg clone $url $basedir"
- else
- error "unable to register this repo type"
+ echo "Registering cvs repository $repo at root $root"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
+hg_register =
+ url=`hg showconfig paths.default`
+ echo "Registering mercurial repo url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
+darcs_register =
+ url=`cat _darcs/prefs/defaultrepo`
+ echo "Registering darcs repository $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url' '$MR_REPO'"
+git_bare_register =
+ url="`LC_ALL=C GIT_CONFIG=config git config --get remote.origin.url`" || true
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
fi
+ echo "Registering git url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+
help =
if [ ! -e "$MR_PATH" ]; then
error "cannot find program path"
fi
- (pod2man -c mr "$MR_PATH" | man -l -) || error "pod2man or man failed"
+ tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
+ trap "rm -f $tmp" exit
+ pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
+ man -l "$tmp" || error "man failed"
list = true
config =
T = echo "I pity the fool."
right = echo "Not found."
#}}}
+
+# vim:sw=8:sts=0:ts=8:noet
projects / code / myrepos.git / blobdiff