Added --force option that disables repository skipping.

[code/myrepos.git] / mr

diff --git a/mr b/mr
index 089530556b6b12acab6f67b8e9a6869b3387328c..e89d01a288285058046a17a9ebac7c359986c131 100755 (executable)
--- a/mr
+++ b/mr
@@ -16,10 +16,16 @@ B<mr> [options] commit [-m "message"]
 
 B<mr> [options] record [-m "message"]
 
 
 B<mr> [options] record [-m "message"]
 

+B<mr> [options] push
+

 B<mr> [options] diff
 
 B<mr> [options] log
 
 B<mr> [options] diff
 
 B<mr> [options] log
 

+B<mr> [options] run command [param ...]
+
+B<mr> [options] bootstrap url [directory]
+

 B<mr> [options] register [repository]
 
 B<mr> [options] config section ["parameter=[value]" ...]
 B<mr> [options] register [repository]
 
 B<mr> [options] config section ["parameter=[value]" ...]


@@ -34,16 +40,22 @@ B<mr> [options] remember action [params ...]
 
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined
 
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined

-repository. It supports any combination of subversion, git, cvs, mecurial,
-bzr and darcs repositories, and support for other revision control systems can
-easily be added.
+repository. It supports any combination of subversion, git, cvs, mercurial,
+bzr, darcs and fossil repositories, and support for other version
+control systems can easily be added.

 
 B<mr> cds into and operates on all registered repositories at or below your
 working directory. Or, if you are in a subdirectory of a repository that
 contains no other registered repositories, it will stay in that directory,
 and work on only that repository,
 
 
 B<mr> cds into and operates on all registered repositories at or below your
 working directory. Or, if you are in a subdirectory of a repository that
 contains no other registered repositories, it will stay in that directory,
 and work on only that repository,
 

-These predefined commands should be fairly familiar to users of any revision
+B<mr> is configured by .mrconfig files, which list the repositories. It
+starts by reading the .mrconfig file in your home directory, and this can
+in turn chain load .mrconfig files from repositories. It also automatically
+looks for a .mrconfig file in the current directory, or in one of its
+parent directories.
+
+These predefined commands should be fairly familiar to users of any version

 control system:
 
 =over 4
 control system:
 
 =over 4


@@ -75,14 +87,14 @@ The optional -m parameter allows specifying a commit message.
 =item record
 
 Records changes to the local repository, but does not push them to the
 =item record
 
 Records changes to the local repository, but does not push them to the

-remote repository. Only supported for distributed revision control systems.
+remote repository. Only supported for distributed version control systems.

 
 The optional -m parameter allows specifying a commit message.
 
 =item push
 
 Pushes committed local changes to the remote repository. A no-op for
 
 The optional -m parameter allows specifying a commit message.
 
 =item push
 
 Pushes committed local changes to the remote repository. A no-op for

-centralized revision control systems.
+centralized version control systems.

 
 =item diff
 
 
 =item diff
 


@@ -92,12 +104,27 @@ Show a diff of uncommitted changes.
 
 Show the commit log.
 
 
 Show the commit log.
 

+=item run command [param ...]
+
+Runs the specified command in each repository.
+

 =back
 
 These commands are also available:
 
 =over 4
 
 =back
 
 These commands are also available:
 
 =over 4
 

+=item bootstrap url [directory]
+
+Causes mr to download the url, and use it as a .mrconfig file
+to checkout the repositories listed in it, into the specified directory.
+
+The directory will be created if it does not exist. If no directory is
+specified, the current directory will be used.
+
+If the .mrconfig file includes a repository named ".", that
+is checked out into the top of the specified directory.
+

 =item list (or ls)
 
 List the repositories that mr will act on.
 =item list (or ls)
 
 List the repositories that mr will act on.


@@ -109,7 +136,7 @@ repository in the current directory is registered, or you can specify a
 directory to register.
 
 The mrconfig file that is modified is chosen by either the -c option, or by
 directory to register.
 
 The mrconfig file that is modified is chosen by either the -c option, or by

-looking for the closest known one at or below the current directory.
+looking for the closest known one at or in a parent of the current directory.

 
 =item config
 
 
 =item config
 


@@ -130,8 +157,8 @@ To see the built-in library of shell functions contained in mr:
 
   mr config DEFAULT lib
 
 
   mr config DEFAULT lib
 

-The ~/.mrconfig file is used by default. To use a different config file,
-use the -c option.
+The mrconfig file that is used is chosen by either the -c option, or by
+looking for the closest known one at or in a parent of the current directory.

 
 =item offline
 
 
 =item offline
 


@@ -162,8 +189,8 @@ Actions can be abbreviated to any unambiguous substring, so
 update"
 
 Additional parameters can be passed to most commands, and are passed on
 update"
 
 Additional parameters can be passed to most commands, and are passed on

-unchanged to the underlying revision control system. This is mostly useful
-if the repositories mr will act on all use the same revision control
+unchanged to the underlying version control system. This is mostly useful
+if the repositories mr will act on all use the same version control

 system.
 
 =head1 OPTIONS
 system.
 
 =head1 OPTIONS


@@ -172,34 +199,65 @@ system.
 
 =item -d directory
 
 
 =item -d directory
 

+=item --directory directory
+

 Specifies the topmost directory that B<mr> should work in. The default is
 the current working directory.
 
 =item -c mrconfig
 
 Specifies the topmost directory that B<mr> should work in. The default is
 the current working directory.
 
 =item -c mrconfig
 

-Use the specified mrconfig file. The default is B<~/.mrconfig>
+=item --config mrconfig
+
+Use the specified mrconfig file. The default is to use both F<~/.mrconfig>
+as well as look for a F<.mrconfig> file in the current directory, or in one
+of its parent directories.
+
+=item -f
+
+=item --force
+
+Force mr to act on repositories that would normally be skipped due to their
+configuration.

 
 =item -v
 
 
 =item -v
 

+=item --verbose
+

 Be verbose.
 
 =item -q
 
 Be verbose.
 
 =item -q
 

-Be quiet.
+=item --quiet
+
+Be quiet. This suppresses mr's usual output, as well as any output from
+commands that are run (including stderr output). If a command fails,
+the output will be shown.
+
+=item -k
+
+=item --insecure
+
+Accept untrusted SSL certificates when bootstrapping.

 
 =item -s
 
 
 =item -s
 

+=item --stats
+

 Expand the statistics line displayed at the end to include information
 about exactly which repositories failed and were skipped, if any.
 
 =item -i
 
 Expand the statistics line displayed at the end to include information
 about exactly which repositories failed and were skipped, if any.
 
 =item -i
 

+=item --interactive
+

 Interactive mode. If a repository fails to be processed, a subshell will be
 started which you can use to resolve or investigate the problem. Exit the
 subshell to continue the mr run.
 
 =item -n [number]
 
 Interactive mode. If a repository fails to be processed, a subshell will be
 started which you can use to resolve or investigate the problem. Exit the
 subshell to continue the mr run.
 
 =item -n [number]
 

+=item --no-recurse [number]
+

 If no number if specified, just operate on the repository for the current
 directory, do not recurse into deeper repositories.
 
 If no number if specified, just operate on the repository for the current
 directory, do not recurse into deeper repositories.
 


@@ -209,6 +267,8 @@ but not ./src/packages/bar.
 
 =item -j [number]
 
 
 =item -j [number]
 

+=item --jobs [number]
+

 Run the specified number of jobs in parallel, or an unlimited number of jobs
 with no number specified. This can greatly speed up operations such as updates.
 It is not recommended for interactive operations.
 Run the specified number of jobs in parallel, or an unlimited number of jobs
 with no number specified. This can greatly speed up operations such as updates.
 It is not recommended for interactive operations.


@@ -217,23 +277,27 @@ Note that running more than 10 jobs at a time is likely to run afoul of
 ssh connection limits. Running between 3 and 5 jobs at a time will yield
 a good speedup in updates without loading the machine too much.
 
 ssh connection limits. Running between 3 and 5 jobs at a time will yield
 a good speedup in updates without loading the machine too much.
 

-=back
+=item -t

 
 

-=head1 FILES
+=item --trust-all

 
 

-The ~/.mrlog file contains commands that mr has remembered to run later,
-due to being offline. You can delete or edit this file to remove commands,
-or even to add other commands for 'mr online' to run. If the file is
-present, mr assumes it is in offline mode.
+Trust all mrconfig files even if they are not listed in F<~/.mrtrust>.
+Use with caution.

 
 

-B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
-file in your home directory, and this can in turn chain load .mrconfig files
-from repositories.
+=item -p

 
 

-Here is an example .mrconfig file:
+=item --path
+
+This obsolete flag is ignored.
+
+=back
+
+=head1 MRCONFIG FILES
+
+Here is an example F<.mrconfig> file:

 
   [src]
 
   [src]

-  checkout = svn co svn://svn.example.com/src/trunk src
+  checkout = svn checkout svn://svn.example.com/src/trunk src

   chain = true
 
   [src/linux-2.6]
   chain = true
 
   [src/linux-2.6]


@@ -241,14 +305,14 @@ Here is an example .mrconfig file:
        cd linux-2.6 &&
        git checkout -b mybranch origin/master
 
        cd linux-2.6 &&
        git checkout -b mybranch origin/master
 

-The .mrconfig file uses a variant of the INI file format. Lines starting with
-"#" are comments. Values can be continued to the following line by
-indenting the line with whitespace.
+The F<.mrconfig> file uses a variant of the INI file format. Lines
+starting with "#" are comments. Values can be continued to the
+following line by indenting the line with whitespace.

 
 

-The "DEFAULT" section allows setting default values for the sections that
+The C<DEFAULT> section allows setting default values for the sections that

 come after it.
 
 come after it.
 

-The "ALIAS" section allows adding aliases for actions. Each parameter
+The C<ALIAS> section allows adding aliases for actions. Each parameter

 is an alias, and its value is the action to use.
 
 All other sections add repositories. The section header specifies the
 is an alias, and its value is the action to use.
 
 All other sections add repositories. The section header specifies the


@@ -256,27 +320,34 @@ directory where the repository is located. This is relative to the directory
 that contains the mrconfig file, but you can also choose to use absolute
 paths. (Note that you can use environment variables in section names; they
 will be passed through the shell for expansion. For example, 
 that contains the mrconfig file, but you can also choose to use absolute
 paths. (Note that you can use environment variables in section names; they
 will be passed through the shell for expansion. For example, 

-"[$HOSTNAME]", or "[${HOSTNAME}foo]")
+C<[$HOSTNAME]>, or C<[${HOSTNAME}foo]>).

 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",
 
 Within a section, each parameter defines a shell command to run to handle a
 given action. mr contains default handlers for "update", "status",

-"commit", and other standard actions. Normally you only need to specify what
-to do for "checkout".
+"commit", and other standard actions.

 
 

-Note that these shell commands are run in a "set -e" shell
+Normally you only need to specify what to do for "checkout". Here you
+specify the command to run in order to create a checkout of the repository.
+The command will be run in the parent directory, and must create the
+repository's directory. So use C<git clone>, C<svn checkout>, C<bzr branch>
+or C<bzr checkout> (for a bound branch), etc.
+
+Note that these shell commands are run in a C<set -e> shell

 environment, where any additional parameters you pass are available in
 environment, where any additional parameters you pass are available in

-"$@". The "checkout" command is run in the parent of the repository
-directory, since the repository isn't checked out yet. All other commands
-are run inside the repository, though not necessarily at the top of it.
+C<$@>. All commands other than "checkout" are run inside the repository,
+though not necessarily at the top of it.

 
 

-The "MR_REPO" environment variable is set to the path to the top of the
+The C<MR_REPO> environment variable is set to the path to the top of the

 repository. (For the "register" action, "MR_REPO" is instead set to the 
 basename of the directory that should be created when checking the
 repository out.)
 
 repository. (For the "register" action, "MR_REPO" is instead set to the 
 basename of the directory that should be created when checking the
 repository out.)
 

-The "MR_CONFIG" environment variable is set to the .mrconfig file
+The C<MR_CONFIG> environment variable is set to the .mrconfig file

 that defines the repo being acted on, or, if the repo is not yet in a config
 that defines the repo being acted on, or, if the repo is not yet in a config

-file, the .mrconfig file that should be modified to register the repo.
+file, the F<.mrconfig> file that should be modified to register the repo.
+
+The C<MR_ACTION> environment variable is set to the command being run
+(update, checkout, etc).

 
 A few parameters have special meanings:
 
 
 A few parameters have special meanings:
 


@@ -286,15 +357,28 @@ A few parameters have special meanings:
 
 If the "skip" parameter is set and its command returns true, then B<mr>
 will skip acting on that repository. The command is passed the action
 
 If the "skip" parameter is set and its command returns true, then B<mr>
 will skip acting on that repository. The command is passed the action

-name in $1.
+name in C<$1>.

 
 Here are two examples. The first skips the repo unless
 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's
 been at least 12 hours since the last update.
 
 
 Here are two examples. The first skips the repo unless
 mr is run by joey. The second uses the hours_since function
 (included in mr's built-in library) to skip updating the repo unless it's
 been at least 12 hours since the last update.
 

+  [mystuff]
+  checkout = ...

   skip = test `whoami` != joey
   skip = test `whoami` != joey

+
+  [linux]
+  checkout = ...

   skip = [ "$1" = update ] && ! hours_since "$1" 12
   skip = [ "$1" = update ] && ! hours_since "$1" 12

+ 
+Another way to use skip is for a lazy checkout. This makes mr skip
+operating on a repo unless it already exists. To enable the 
+repo, you have to explicitly check it out (using "mr --force -d foo checkout").
+
+  [foo]
+  checkout = ...
+  skip = lazy

 
 =item order
 
 
 =item order
 


@@ -309,8 +393,7 @@ repository, ordering it to be processed earlier is not recommended.
 =item chain
 
 If the "chain" parameter is set and its command returns true, then B<mr>
 =item chain
 
 If the "chain" parameter is set and its command returns true, then B<mr>

-will try to load a .mrconfig file from the root of the repository. (You
-should avoid chaining from repositories with untrusted committers.)
+will try to load a F<.mrconfig> file from the root of the repository.

 
 =item include
 
 
 =item include
 


@@ -321,29 +404,114 @@ part of the including file.
 Unlike all other parameters, this parameter does not need to be placed
 within a section.
 
 Unlike all other parameters, this parameter does not need to be placed
 within a section.
 

+B<mr> ships several libraries that can be included to add support for
+additional version control type things (unison, git-svn, vcsh, git-fake-bare,
+git-subtree). To include them all, you could use:
+
+  include = cat /usr/share/mr/*
+
+See the individual files for details.
+
+=item deleted
+
+If the "deleted" parameter is set and its command returns true, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repository's directory.
+This is useful when one mrconfig file is shared among multiple machines,
+to keep track of and remember to delete old repositories.
+

 =item lib
 
 =item lib
 

-The "lib" parameter can specify some shell code that will be run before each
-command, this can be a useful way to define shell functions for other commands
-to use.
+The "lib" parameter can specify some shell code that will be run
+before each command, this can be a useful way to define shell
+functions for other commands to use. 

 
 

-=back
+Unlike most other parameters, this can be specified multiple times, in
+which case the chunks of shell code are accumulatively concatenated
+together.
+
+=item fixups
+
+If the "fixups" parameter is set, its command is run whenever a repository
+is checked out, or updated. This provides an easy way to do things
+like permissions fixups, or other tweaks to the repository content,
+whenever the repository is changed.
+
+=item VCS_action

 
 When looking for a command to run for a given action, mr first looks for
 a parameter with the same name as the action. If that is not found, it
 
 When looking for a command to run for a given action, mr first looks for
 a parameter with the same name as the action. If that is not found, it

-looks for a parameter named "rcs_action" (substituting in the name of the
-revision control system and the action). The name of the revision control
-system is itself determined by running each defined "rcs_test" action,
-until one succeeds.
+looks for a parameter named "VCS_action" (substituting in the name of the
+version control system and the action).

 
 Internally, mr has settings for "git_update", "svn_update", etc. To change
 
 Internally, mr has settings for "git_update", "svn_update", etc. To change

-the action that is performed for a given revision control system, you can
-override these rcs specific actions. To add a new revision control system,
-you can just add rcs specific actions for it.
+the action that is performed for a given version control system, you can
+override these VCS specific actions. To add a new version control system,
+you can just add VCS specific actions for it.
+
+=item pre_ and post_
+
+If a "pre_action" parameter is set, its command is run before mr performs the
+specified action. Similarly, "post_action" parameters are run after mr
+successfully performs the specified action. For example, "pre_commit" is
+run before committing; "post_update" is run after updating.
+
+=item _append
+
+Any parameter can be suffixed with C<_append>, to add an additional value
+to the existing value of the parameter. In this way, actions 
+can be constructed accumulatively.
+
+=item VCS_test
+
+The name of the version control system is itself determined by
+running each defined "VCS_test" action, until one succeeds.
+
+=item VCS_dir_test
+
+This is a more optimised way to test for the version control system.
+Each "VCS_dir_test" action is run once, and can output lines consisting
+of the name of a VCS, and a directory to look for in the top of a repo
+to detect that VCS.
+
+=back
+
+=head1 UNTRUSTED MRCONFIG FILES
+
+Since mrconfig files can contain arbitrary shell commands, they can do
+anything. This flexibility is good, but it also allows a malicious mrconfig
+file to delete your whole home directory. Such a file might be contained
+inside a repository that your main F<~/.mrconfig> checks out. To
+avoid worries about evil commands in a mrconfig file, mr defaults to
+reading all mrconfig files other than the main F<~/.mrconfig> in untrusted
+mode. In untrusted mode, mrconfig files are limited to running only known
+safe commands (like "git clone") in a carefully checked manner.
+
+To configure mr to trust other mrconfig files, list them in F<~/.mrtrust>.
+One mrconfig file should be listed per line. Either the full pathname
+should be listed, or the pathname can start with F<~/> to specify a file
+relative to your home directory.
+
+=head1 OFFLINE LOG FILE
+
+The F<~/.mrlog> file contains commands that mr has remembered to run later,
+due to being offline. You can delete or edit this file to remove commands,
+or even to add other commands for 'mr online' to run. If the file is
+present, mr assumes it is in offline mode.
+
+=head1 EXTENSIONS
+
+mr can be extended to support things such as unison and git-svn. Some
+files providing such extensions are available in F</usr/share/mr/>. See
+the documentation in the files for details about using them.
+
+=head1 EXIT STATUS
+
+mr returns nonzero if a command failed in any of the repositories.

 
 =head1 AUTHOR
 
 
 =head1 AUTHOR
 

-Copyright 2007 Joey Hess <joey@kitenet.net>
+Copyright 2007-2011 Joey Hess <joey@kitenet.net>

 
 Licensed under the GNU GPL version 2 or higher.
 
 
 Licensed under the GNU GPL version 2 or higher.
 


@@ -369,12 +537,16 @@ my $config_overridden=0;
 my $verbose=0;
 my $quiet=0;
 my $stats=0;
 my $verbose=0;
 my $quiet=0;
 my $stats=0;

+my $force=0;
+my $insecure=0;

 my $interactive=0;
 my $max_depth;
 my $no_chdir=0;
 my $jobs=1;
 my $interactive=0;
 my $max_depth;
 my $no_chdir=0;
 my $jobs=1;

+my $trust_all=0;

 my $directory=getcwd();
 my $directory=getcwd();

-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+$ENV{MR_CONFIG}=find_mrconfig();

 
 # globals :-(
 my %config;
 
 # globals :-(
 my %config;


@@ -385,41 +557,108 @@ my (@ok, @failed, @skipped);
 
 main();
 
 
 main();
 

-my %rcs;
-sub rcs_test {
+sub shellquote {
+       my $i=shift;
+       $i=~s/'/'"'"'/g;
+       return "'$i'";
+}
+
+# Runs a shell command using a supplied function.
+# The lib will be included in the shell command line, and any params
+# will be available in the shell as $1, $2, etc.
+my $lastlib;
+sub runsh {
+       my ($action, $topdir, $subdir, $command, $params, $runner) = @_;
+
+       # optimisation: avoid running the shell for true and false
+       if ($command =~ /^\s*true\s*$/) {
+               $?=0;
+               return 0;
+       }
+       elsif ($command =~ /^\s*false\s*$/) {
+               $?=0;
+               return 1;
+       }
+       
+       my $quotedparams=join(" ", (map { shellquote($_) } @$params));
+       my $lib=exists $config{$topdir}{$subdir}{lib} ?
+                      $config{$topdir}{$subdir}{lib}."\n" : "";
+       if ($verbose && (! defined $lastlib || $lastlib ne $lib)) {
+               print "mr library now: >>$lib<<\n";
+               $lastlib=$lib;
+       }
+       my $shellcode="set -e;".$lib.
+               "my_sh(){ $command\n }; my_sh $quotedparams";
+       print "mr $action: running $action >>$command<<\n" if $verbose;
+       $runner->($shellcode);
+}
+
+sub runshpipe {
+       runsh @_, sub {
+               my $sh=shift;
+               my $ret=`$sh`;
+               chomp $ret;
+               return $ret;
+       };
+}
+
+my %vcs;
+my %vcs_dir_test;
+sub vcs_test {

        my ($action, $dir, $topdir, $subdir) = @_;
 
        my ($action, $dir, $topdir, $subdir) = @_;
 

-       if (exists $rcs{$dir}) {
-               return $rcs{$dir};
+       if (exists $vcs{$dir}) {
+               return $vcs{$dir};

        }
 
        }
 

-       my $test="set -e\n";
-       foreach my $rcs_test (
+       my $test="";
+       my $dir_test="";
+       foreach my $vcs_test (

                        sort {
                                length $a <=> length $b 
                                          ||
                                       $a cmp $b
                        } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
                        sort {
                                length $a <=> length $b 
                                          ||
                                       $a cmp $b
                        } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {

-               my ($rcs)=$rcs_test=~/(.*)_test/;
-               $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
-               $test.="if my_$rcs_test; then echo $rcs; fi\n";
+               if ($vcs_test =~ /(.*)_dir_test/) {
+                       my $vcs=$1;
+                       if (! defined $vcs_dir_test{$vcs}) {
+                               $dir_test.=$config{$topdir}{$subdir}{$vcs_test}."\n";
+                       }
+                       next;
+               }
+               my $vcs=$vcs_test =~ /(.*)_test/;
+               $test="my_$vcs_test() {\n$config{$topdir}{$subdir}{$vcs_test}\n}\n".$test;
+               $test.="if my_$vcs_test; then echo $vcs; fi\n";

        }
        }

-       $test=$config{$topdir}{$subdir}{lib}."\n".$test
-               if exists $config{$topdir}{$subdir}{lib};
-       
-       print "mr $action: running rcs test >>$test<<\n" if $verbose;
-       my $rcs=`$test`;
-       chomp $rcs;
-       if ($rcs=~/\n/s) {
-               $rcs=~s/\n/, /g;
-               print STDERR "mr $action: found multiple possible repository types ($rcs) for $dir\n";
+
+       if (length $dir_test) {
+               runsh "vcs dir test", $topdir, $subdir, $dir_test, [], sub {
+                       my $sh=shift;
+                       foreach my $line (`$sh`) {
+                               chomp $line;
+                               my ($vcs, $dir)=split(" ", $line);
+                               $vcs_dir_test{$vcs}=$dir;
+                       }
+               }
+       }
+
+       foreach my $vcs (keys %vcs_dir_test) {
+               if (-d "$ENV{MR_REPO}/$vcs_dir_test{$vcs}") {
+                       return $vcs{$dir}=$vcs;
+               }
+       }
+
+       my $vcs=runshpipe "vcs test", $topdir, $subdir, $test, [];
+       if ($vcs=~/\n/s) {
+               $vcs=~s/\n/, /g;
+               print STDERR "mr $action: found multiple possible repository types ($vcs) for ".fulldir($topdir, $subdir)."\n";

                return undef;
        }
                return undef;
        }

-       if (! length $rcs) {
-               return $rcs{$dir}=undef;
+       if (! length $vcs) {
+               return $vcs{$dir}=undef;

        }
        else {
        }
        else {

-               return $rcs{$dir}=$rcs;
+               return $vcs{$dir}=$vcs;

        }
 }
        
        }
 }
        


@@ -434,65 +673,83 @@ sub findcommand {
                return undef;
        }
 
                return undef;
        }
 

-       my $rcs=rcs_test(@_);
+       my $vcs=vcs_test(@_);

 
 

-       if (defined $rcs && 
-           exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
-               return $config{$topdir}{$subdir}{$rcs."_".$action};
+       if (defined $vcs && 
+           exists $config{$topdir}{$subdir}{$vcs."_".$action}) {
+               return $config{$topdir}{$subdir}{$vcs."_".$action};

        }
        else {
                return undef;
        }
 }
 
        }
        else {
                return undef;
        }
 }
 

+sub fulldir {
+       my ($topdir, $subdir) = @_;
+       return $subdir =~ /^\// ? $subdir : $topdir.$subdir;
+}
+

 sub action {
 sub action {

-       my ($action, $dir, $topdir, $subdir) = @_;
-       
+       my ($action, $dir, $topdir, $subdir, $force_checkout) = @_;
+       my $fulldir=fulldir($topdir, $subdir);
+

        $ENV{MR_CONFIG}=$configfiles{$topdir};
        $ENV{MR_CONFIG}=$configfiles{$topdir};

-       my $lib=exists $config{$topdir}{$subdir}{lib} ?
-                      $config{$topdir}{$subdir}{lib}."\n" : "";

        my $is_checkout=($action eq 'checkout');
        my $is_checkout=($action eq 'checkout');

+       my $is_update=($action =~ /update/);

 
 

-       $ENV{MR_REPO}=$dir;
+       ($ENV{MR_REPO}=$dir) =~ s!/$!!;
+       $ENV{MR_ACTION}=$action;
+       
+       foreach my $testname ("skip", "deleted") {
+               next if $force && $testname eq "skip";
+
+               my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
+
+               if (defined $testcommand) {
+                       my $ret=runsh "$testname test", $topdir, $subdir,
+                               $testcommand, [$action],
+                               sub { system(shift()) };
+                       if ($ret != 0) {
+                               if (($? & 127) == 2) {
+                                       print STDERR "mr $action: interrupted\n";
+                                       return ABORT;
+                               }
+                               elsif ($? & 127) {
+                                       print STDERR "mr $action: $testname test received signal ".($? & 127)."\n";
+                                       return ABORT;
+                               }
+                       }
+                       if ($ret >> 8 == 0) {
+                               if ($testname eq "deleted") {
+                                       if (-d $dir) {
+                                               print STDERR "mr error: $dir should be deleted yet still exists\n";
+                                               return FAILED;
+                                       }
+                               }
+                               print "mr $action: skip $dir skipped\n" if $verbose;
+                               return SKIPPED;
+                       }
+               }
+       }

 
        if ($is_checkout) {
 
        if ($is_checkout) {

-               if (-d $dir) {
-                       print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
-                       return SKIPPED;
+               if (! $force_checkout) {
+                       if (-d $dir) {
+                               print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
+                               return SKIPPED;
+                       }
+       
+                       $dir=~s/^(.*)\/[^\/]+\/?$/$1/;

                }
                }

-
-               $dir=~s/^(.*)\/[^\/]+\/?$/$1/;

        }
        }

-       elsif ($action =~ /update/) {
+       elsif ($is_update) {

                if (! -d $dir) {
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
 
                if (! -d $dir) {
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
 

-       my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);

        my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
 
        my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
 

-       if (defined $skiptest) {
-               my $test="set -e;".$lib.
-                       "my_action(){ $skiptest\n }; my_action '$action'";
-               print "mr $action: running skip test >>$test<<\n" if $verbose;
-               my $ret=system($test);
-               if ($ret != 0) {
-                       if (($? & 127) == 2) {
-                               print STDERR "mr $action: interrupted\n";
-                               return ABORT;
-                       }
-                       elsif ($? & 127) {
-                               print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
-                               return ABORT;
-                       }
-               }
-               if ($ret >> 8 == 0) {
-                       print "mr $action: $dir skipped per config file\n" if $verbose;
-                       return SKIPPED;
-               }
-       }
-

        if ($is_checkout && ! -d $dir) {
                print "mr $action: creating parent directory $dir\n" if $verbose;
                system("mkdir", "-p", $dir);
        if ($is_checkout && ! -d $dir) {
                print "mr $action: creating parent directory $dir\n" if $verbose;
                system("mkdir", "-p", $dir);


@@ -503,30 +760,47 @@ sub action {
                return FAILED;
        }
        elsif (! defined $command) {
                return FAILED;
        }
        elsif (! defined $command) {

-               my $rcs=rcs_test(@_);
-               if (! defined $rcs) {
-                       print STDERR "mr $action: unknown repository type and no defined $action command for $dir\n";
+               my $vcs=vcs_test(@_);
+               if (! defined $vcs) {
+                       print STDERR "mr $action: unknown repository type and no defined $action command for $fulldir\n";

                        return FAILED;
                }
                else {
                        return FAILED;
                }
                else {

-                       print STDERR "mr $action: no defined action for $rcs repository $dir, skipping\n";
+                       print STDERR "mr $action: no defined action for $vcs repository $fulldir, skipping\n";

                        return SKIPPED;
                }
        }
        else {
                        return SKIPPED;
                }
        }
        else {

+               my $actionmsg;

                if (! $no_chdir) {
                if (! $no_chdir) {

-                       print "mr $action: $dir\n" unless $quiet;
+                       $actionmsg="mr $action: $fulldir";

                }
                else {
                        my $s=$directory;
                }
                else {
                        my $s=$directory;

-                       $s=~s/^\Q$dir\E\/?//;
-                       print "mr $action: $dir (in subdir $s)\n" unless $quiet;
+                       $s=~s/^\Q$fulldir\E\/?//;
+                       $actionmsg="mr $action: $fulldir (in subdir $s)";

                }
                }

-               $command="set -e; ".$lib.
-                       "my_action(){ $command\n }; my_action ".
-                       join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-               print "mr $action: running >>$command<<\n" if $verbose;
-               my $ret=system($command);
+               print "$actionmsg\n" unless $quiet;
+
+               my $hookret=hook("pre_$action", $topdir, $subdir);
+               return $hookret if $hookret != OK;
+
+               my $ret=runsh $action, $topdir, $subdir,
+                       $command, \@ARGV, sub {
+                               my $sh=shift;
+                               if ($quiet) {
+                                       my $output = qx/$sh 2>&1/;
+                                       my $ret = $?;
+                                       if ($ret != 0) {
+                                               print "$actionmsg\n";
+                                               print STDERR $output;
+                                       }
+                                       return $ret;
+                               }
+                               else {
+                                       system($sh);
+                               }
+                       };

                if ($ret != 0) {
                        if (($? & 127) == 2) {
                                print STDERR "mr $action: interrupted\n";
                if ($ret != 0) {
                        if (($? & 127) == 2) {
                                print STDERR "mr $action: interrupted\n";


@@ -554,16 +828,60 @@ sub action {
                        return FAILED;
                }
                else {
                        return FAILED;
                }
                else {

-                       if ($action eq 'checkout' && ! -d $dir) {
+                       if ($is_checkout && ! -d $dir) {

                                print STDERR "mr $action: $dir missing after checkout\n";;
                                return FAILED;
                        }
 
                                print STDERR "mr $action: $dir missing after checkout\n";;
                                return FAILED;
                        }
 

+                       my $ret=hook("post_$action", $topdir, $subdir);
+                       return $ret if $ret != OK;
+                       
+                       if (($is_checkout || $is_update)) {
+                               my $ret=hook("fixups", $topdir, $subdir);
+                               return $ret if $ret != OK;
+                       }
+                       

                        return OK;
                }
        }
 }
 
                        return OK;
                }
        }
 }
 

+sub hook {
+       my ($hook, $topdir, $subdir) = @_;
+
+       my $command=$config{$topdir}{$subdir}{$hook};
+       return OK unless defined $command;
+       my $ret=runsh $hook, $topdir, $subdir, $command, [], sub {
+                       my $sh=shift;
+                       if ($quiet) {
+                               my $output = qx/$sh 2>&1/;
+                               my $ret = $?;
+                               if ($ret != 0) {
+                                       print STDERR $output;
+                               }
+                               return $ret;
+                       }
+                       else {
+                               system($sh);
+                       }
+               };
+       if ($ret != 0) {
+               if (($? & 127) == 2) {
+                       print STDERR "mr $hook: interrupted\n";
+                       return ABORT;
+               }
+               elsif ($? & 127) {
+                       print STDERR "mr $hook: received signal ".($? & 127)."\n";
+                       return ABORT;
+               }
+               else {
+                       return FAILED;
+               }
+       }
+
+       return OK;
+}
+

 # run actions on multiple repos, in parallel
 sub mrs {
        my $action=shift;
 # run actions on multiple repos, in parallel
 sub mrs {
        my $action=shift;


@@ -640,16 +958,16 @@ sub record {
 
        if ($ret == OK) {
                push @ok, $dir;
 
        if ($ret == OK) {
                push @ok, $dir;

-               print "\n";
+               print "\n" unless $quiet;

        }
        elsif ($ret == FAILED) {
                if ($interactive) {
                        chdir($dir) unless $no_chdir;
                        print STDERR "mr: Starting interactive shell. Exit shell to continue.\n";
        }
        elsif ($ret == FAILED) {
                if ($interactive) {
                        chdir($dir) unless $no_chdir;
                        print STDERR "mr: Starting interactive shell. Exit shell to continue.\n";

-                       system((getpwuid($<))[8]);
+                       system((getpwuid($<))[8], "-i");

                }
                push @failed, $dir;
                }
                push @failed, $dir;

-               print "\n";
+               print "\n" unless $quiet;

        }
        elsif ($ret == SKIPPED) {
                push @skipped, $dir;
        }
        elsif ($ret == SKIPPED) {
                push @skipped, $dir;


@@ -713,7 +1031,19 @@ sub repolist {
        } @list;
 }
 
        } @list;
 }
 

-# figure out which repos to act on
+sub repodir {
+       my $repo=shift;
+       my $topdir=$repo->{topdir};
+       my $subdir=$repo->{subdir};
+       my $ret=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+       $ret=~s/\/\.$//;
+       return $ret;
+}
+
+# Figure out which repos to act on.  Returns a list of array refs
+# in the format:
+#
+#   [ "$full_repo_path/", "$mr_config_path/", $section_header ]

 sub selectrepos {
        my @repos;
        foreach my $repo (repolist()) {
 sub selectrepos {
        my @repos;
        foreach my $repo (repolist()) {


@@ -721,7 +1051,7 @@ sub selectrepos {
                my $subdir=$repo->{subdir};
 
                next if $subdir eq 'DEFAULT';
                my $subdir=$repo->{subdir};
 
                next if $subdir eq 'DEFAULT';

-               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+               my $dir=repodir($repo);

                my $d=$directory;
                $dir.="/" unless $dir=~/\/$/;
                $d.="/" unless $d=~/\/$/;
                my $d=$directory;
                $dir.="/" unless $dir=~/\/$/;
                $d.="/" unless $d=~/\/$/;


@@ -741,7 +1071,7 @@ sub selectrepos {
                        my $subdir=$repo->{subdir};
                        
                        next if $subdir eq 'DEFAULT';
                        my $subdir=$repo->{subdir};
                        
                        next if $subdir eq 'DEFAULT';

-                       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+                       my $dir=repodir($repo);

                        my $d=$directory;
                        $dir.="/" unless $dir=~/\/$/;
                        $d.="/" unless $d=~/\/$/;
                        my $d=$directory;
                        $dir.="/" unless $dir=~/\/$/;
                        $d.="/" unless $d=~/\/$/;


@@ -767,33 +1097,141 @@ sub expandenv {
        return $val;
 }
 
        return $val;
 }
 

+my %trusted;
+sub is_trusted_config {
+       my $config=shift; # must be abs_pathed already
+
+       # We always trust ~/.mrconfig.
+       return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig");
+
+       return 1 if $trust_all;
+
+       my $trustfile=$ENV{HOME}."/.mrtrust";
+
+       if (! %trusted) {
+               $trusted{"$ENV{HOME}/.mrconfig"}=1;
+               if (open (TRUST, "<", $trustfile)) {
+                       while (<TRUST>) {
+                               chomp;
+                               s/^~\//$ENV{HOME}\//;
+                               $trusted{abs_path($_)}=1;
+                       }
+                       close TRUST;
+               }
+       }
+
+       return $trusted{$config};
+}
+
+
+sub is_trusted_repo {
+       my $repo=shift;
+       
+       # Tightly limit what is allowed in a repo name.
+       # No ../, no absolute paths, and no unusual filenames
+       # that might try to escape to the shell.
+       return $repo =~ /^[-_.+\/A-Za-z0-9]+$/ &&
+              $repo !~ /\.\./ && $repo !~ /^\//;
+}
+
+sub is_trusted_checkout {
+       my $command=shift;
+       
+       # To determine if the command is safe, compare it with the
+       # *_trusted_checkout config settings. Those settings are
+       # templates for allowed commands, so make sure that each word
+       # of the command matches the corresponding word of the template.
+       
+       my @words;
+       foreach my $word (split(' ', $command)) {
+               # strip quoting
+               if ($word=~/^'(.*)'$/) {
+                       $word=$1;
+               }
+               elsif ($word=~/^"(.*)"$/) {
+                       $word=$1;
+               }
+
+               push @words, $word;
+       }
+
+       foreach my $key (grep { /_trusted_checkout$/ }
+                        keys %{$config{''}{DEFAULT}}) {
+               my @twords=split(' ', $config{''}{DEFAULT}{$key});
+               next if @words > @twords;
+
+               my $match=1;
+               my $url;
+               for (my $c=0; $c < @twords && $match; $c++) {
+                       if ($twords[$c] eq '$url') {
+                               # Match all the typical characters found in
+                               # urls, plus @ which svn can use. Note
+                               # that the "url" might also be a local
+                               # directory.
+                               $match=(
+                                       defined $words[$c] &&
+                                       $words[$c] =~ /^[-_.+:@\/A-Za-z0-9]+$/
+                               );
+                               $url=$words[$c];
+                       }
+                       elsif ($twords[$c] eq '$repo') {
+                               # If a repo is not specified, assume it
+                               # will be the last path component of the
+                               # url, or something derived from it, and
+                               # check that.
+                               if (! defined $words[$c] && defined $url) {
+                                       ($words[$c])=$url=~/\/([^\/]+)\/?$/;
+                               }
+
+                               $match=(
+                                       defined $words[$c] &&
+                                       is_trusted_repo($words[$c])
+                               );
+                       }
+                       elsif (defined $words[$c] && $words[$c]=~/^($twords[$c])$/) {
+                               $match=1;
+                       }
+                       else {
+                               $match=0;
+                       }
+               }
+               return 1 if $match;
+       }
+
+       return 0;
+}
+

 my %loaded;
 sub loadconfig {
        my $f=shift;
 my %loaded;
 sub loadconfig {
        my $f=shift;

+       my $dir=shift;
+       my $bootstrap_url=shift;

 
        my @toload;
 
        my $in;
 
        my @toload;
 
        my $in;

-       my $dir;
+       my $trusted;

        if (ref $f eq 'GLOB') {
                $dir="";
        if (ref $f eq 'GLOB') {
                $dir="";

-               $in=$f; 
+               $in=$f;
+               $trusted=1;

        }
        else {
        }
        else {

-               if (! -e $f) {
-                       return;
-               }
-

                my $absf=abs_path($f);
                if ($loaded{$absf}) {
                        return;
                }
                $loaded{$absf}=1;
 
                my $absf=abs_path($f);
                if ($loaded{$absf}) {
                        return;
                }
                $loaded{$absf}=1;
 

-               ($dir)=$f=~/^(.*\/)[^\/]+$/;
+               $trusted=is_trusted_config($absf);
+

                if (! defined $dir) {
                if (! defined $dir) {

-                       $dir=".";
+                       ($dir)=$f=~/^(.*\/)[^\/]+$/;
+                       if (! defined $dir) {
+                               $dir=".";
+                       }

                }
                }

+

                $dir=abs_path($dir)."/";
                
                if (! exists $configfiles{$dir}) {
                $dir=abs_path($dir)."/";
                
                if (! exists $configfiles{$dir}) {


@@ -813,21 +1251,85 @@ sub loadconfig {
                        }
                }
                
                        }
                }
                

+               if (! -e $f) {
+                       return;
+               }
+

                print "mr: loading config $f\n" if $verbose;
                open($in, "<", $f) || die "mr: open $f: $!\n";
        }
        my @lines=<$in>;
                print "mr: loading config $f\n" if $verbose;
                open($in, "<", $f) || die "mr: open $f: $!\n";
        }
        my @lines=<$in>;

-       close $in;
+       close $in unless ref $f eq 'GLOB';

 
        my $section;
 
        my $section;

-       my $line=0;
+
+       # Keep track of the current line in the config file;
+       # when a file is included track the current line from the include.
+       my $lineno=0;
+       my $included=undef;
+
+       my $line;
+       my $nextline = sub {
+               if ($included) {
+                       $included--;
+               }
+               else {
+                       $included=undef;
+                       $lineno++;
+               }
+               $line=shift @lines;
+               chomp $line;
+               return $line;
+       };
+       my $lineerror = sub {
+               my $msg=shift;
+               if (defined $included) {
+                       die "mr: $msg at $f line $lineno, included line: $line\n";
+               }
+               else {
+                       die "mr: $msg at $f line $lineno\n";
+               }
+       };
+       my $trusterror = sub {
+               my $msg=shift;
+               my ($err, $file, $lineno, $url)=@_;
+       
+               if (defined $bootstrap_url) {
+                       die "mr: $err in untrusted $bootstrap_url line $lineno\n".
+                               "(To trust this url, --trust-all can be used; but please use caution;\n".
+                               "this can allow arbitrary code execution!)\n";
+               }
+               else {
+                       die "mr: $err in untrusted $file line $lineno\n".
+                               "(To trust this file, list it in ~/.mrtrust.)\n";
+               }
+       };
+

        while (@lines) {
        while (@lines) {

-               $_=shift @lines;
-               $line++;
-               chomp;
+               $_=$nextline->();
+
+               if (! $trusted && /[[:cntrl:]]/) {
+                       $trusterror->("illegal control character");
+               }
+

                next if /^\s*\#/ || /^\s*$/;
                if (/^\[([^\]]*)\]\s*$/) {
                next if /^\s*\#/ || /^\s*$/;
                if (/^\[([^\]]*)\]\s*$/) {

-                       $section=expandenv($1);
+                       $section=$1;
+
+                       if (! $trusted) {
+                               if (! is_trusted_repo($section) ||
+                                   $section eq 'ALIAS' ||
+                                   $section eq 'DEFAULT') {
+                                       $trusterror->("illegal section \"[$section]\"");
+                               }
+                       }
+                       $section=expandenv($section) if $trusted;
+                       if ($section ne 'ALIAS' &&
+                           ! exists $config{$dir}{$section} &&
+                           exists $config{$dir}{DEFAULT}) {
+                               # copy in defaults
+                               $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
+                       }

                }
                elsif (/^(\w+)\s*=\s*(.*)/) {
                        my $parameter=$1;
                }
                elsif (/^(\w+)\s*=\s*(.*)/) {
                        my $parameter=$1;


@@ -835,35 +1337,51 @@ sub loadconfig {
 
                        # continued value
                        while (@lines && $lines[0]=~/^\s(.+)/) {
 
                        # continued value
                        while (@lines && $lines[0]=~/^\s(.+)/) {

-                               shift(@lines);
-                               $line++;

                                $value.="\n$1";
                                chomp $value;
                                $value.="\n$1";
                                chomp $value;

+                               $nextline->();
+                       }
+
+                       if (! $trusted) {
+                               # Untrusted files can only contain a few
+                               # settings in specific known-safe formats.
+                               if ($parameter eq 'checkout') {
+                                       if (! is_trusted_checkout($value)) {
+                                               $trusterror->("illegal checkout command \"$value\"");
+                                       }
+                               }
+                               elsif ($parameter eq 'order') {
+                                       # not interpreted as a command, so
+                                       # safe.
+                               }
+                               elsif ($value eq 'true' || $value eq 'false') {
+                                       # skip=true , deleted=true etc are
+                                       # safe.
+                               }
+                               else {
+                                       $trusterror->("illegal setting \"$parameter=$value\"");
+                               }

                        }
 
                        if ($parameter eq "include") {
                                print "mr: including output of \"$value\"\n" if $verbose;
                        }
 
                        if ($parameter eq "include") {
                                print "mr: including output of \"$value\"\n" if $verbose;

-                               unshift @lines, `$value`;
+                               my @inc=`$value`;

                                if ($?) {
                                        print STDERR "mr: include command exited nonzero ($?)\n";
                                }
                                if ($?) {
                                        print STDERR "mr: include command exited nonzero ($?)\n";
                                }

+                               $included += @inc;
+                               unshift @lines, @inc;

                                next;
                        }
 
                        if (! defined $section) {
                                next;
                        }
 
                        if (! defined $section) {

-                               die "$f line $.: parameter ($parameter) not in section\n";
-                       }
-                       if ($section ne 'ALIAS' &&
-                           ! exists $config{$dir}{$section} &&
-                           exists $config{$dir}{DEFAULT}) {
-                               # copy in defaults
-                               $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
+                               $lineerror->("parameter ($parameter) not in section");

                        }
                        if ($section eq 'ALIAS') {
                                $alias{$parameter}=$value;
                        }
                        }
                        if ($section eq 'ALIAS') {
                                $alias{$parameter}=$value;
                        }

-                       elsif ($parameter eq 'lib') {
-                               $config{$dir}{$section}{lib}.=$value."\n";
+                       elsif ($parameter eq 'lib' or $parameter =~ s/_append$//) {
+                               $config{$dir}{$section}{$parameter}.="\n".$value."\n";

                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;


@@ -874,34 +1392,46 @@ sub loadconfig {
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&
                                        $knownactions{$parameter}=1;
                                }
                                if ($parameter eq 'chain' &&

-                                   length $dir && $section ne "DEFAULT" &&
-                                   -e $dir.$section."/.mrconfig") {
-                                       my $ret=system($value);
-                                       if ($ret != 0) {
-                                               if (($? & 127) == 2) {
-                                                       print STDERR "mr: chain test interrupted\n";
-                                                       exit 2;
+                                   length $dir && $section ne "DEFAULT") {
+                                       my $chaindir="$section";
+                                       if ($chaindir !~ m!^/!) {
+                                               $chaindir=$dir.$chaindir;
+                                       }
+                                       if (-e "$chaindir/.mrconfig") {
+                                               my $ret=system($value);
+                                               if ($ret != 0) {
+                                                       if (($? & 127) == 2) {
+                                                               print STDERR "mr: chain test interrupted\n";
+                                                               exit 2;
+                                                       }
+                                                       elsif ($? & 127) {
+                                                               print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                                       }

                                                }
                                                }

-                                               elsif ($? & 127) {
-                                                       print STDERR "mr: chain test received signal ".($? & 127)."\n";
+                                               else {
+                                                       push @toload, ["$chaindir/.mrconfig", $chaindir];

                                                }
                                        }
                                                }
                                        }

-                                       else {
-                                               push @toload, $dir.$section."/.mrconfig";
-                                       }

                                }
                        }
                }
                else {
                                }
                        }
                }
                else {

-                       die "$f line $line: parse error\n";
+                       $lineerror->("parse error");

                }
        }
 
                }
        }
 

-       foreach (@toload) {
-               loadconfig($_);
+       foreach my $c (@toload) {
+               loadconfig(@$c);

        }
 }
 
        }
 }
 

+sub startingconfig {
+       %alias=%config=%configfiles=%knownactions=%loaded=();
+       my $datapos=tell(DATA);
+       loadconfig(\*DATA);
+       seek(DATA,$datapos,0); # rewind
+}
+

 sub modifyconfig {
        my $f=shift;
        # the section to modify or add
 sub modifyconfig {
        my $f=shift;
        # the section to modify or add


@@ -1012,6 +1542,9 @@ sub dispatch {
        elsif ($action eq 'register') {
                register(@ARGV);
        }
        elsif ($action eq 'register') {
                register(@ARGV);
        }

+       elsif ($action eq 'bootstrap') {
+               bootstrap();
+       }

        elsif ($action eq 'remember' ||
               $action eq 'offline' ||
               $action eq 'online') {
        elsif ($action eq 'remember' ||
               $action eq 'offline' ||
               $action eq 'online') {


@@ -1112,11 +1645,61 @@ sub register {
        $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
        $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
                "my_action(){ $command\n }; my_action ".
        $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
        $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
                "my_action(){ $command\n }; my_action ".

-               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+               join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV);

        print "mr register: running >>$command<<\n" if $verbose;
        exec($command) || die "exec: $!";
 }
 
        print "mr register: running >>$command<<\n" if $verbose;
        exec($command) || die "exec: $!";
 }
 

+sub bootstrap {
+       my $url=shift @ARGV;
+       my $dir=shift @ARGV || ".";
+       
+       if (! defined $url || ! length $url) {
+               die "mr: bootstrap requires url\n";
+       }
+       
+       # Download the config file to a temporary location.
+       eval q{use File::Temp};
+       die $@ if $@;
+       my $tmpconfig=File::Temp->new();
+       my @curlargs = ("curl", "-A", "mr", "-L", "-s", $url, "-o", $tmpconfig);
+       push(@curlargs, "-k") if $insecure;
+       my $curlstatus = system(@curlargs);
+       die "mr bootstrap: invalid SSL certificate for $url (consider -k)\n" if $curlstatus >> 8 == 60;
+       die "mr bootstrap: download of $url failed\n" if $curlstatus != 0;
+
+       if (! -e $dir) {
+               system("mkdir", "-p", $dir);
+       }
+       chdir($dir) || die "chdir $dir: $!";
+
+       # Special case to handle checkout of the "." repo, which 
+       # would normally be skipped.
+       my $topdir=abs_path(".")."/";
+       my @repo=($topdir, $topdir, ".");
+       loadconfig($tmpconfig, $topdir, $url);
+       record(\@repo, action("checkout", @repo, 1))
+               if exists $config{$topdir}{"."}{"checkout"};
+
+       if (-e ".mrconfig") {
+               print STDERR "mr bootstrap: .mrconfig file already exists, not overwriting with $url\n";
+       }
+       else {
+               eval q{use File::Copy};
+               die $@ if $@;
+               move($tmpconfig, ".mrconfig") || die "rename: $!";
+       }
+
+       # Reload the config file (in case we got a different version)
+       # and checkout everything else.
+       startingconfig();
+       loadconfig(".mrconfig");
+       dispatch("checkout");
+       @skipped=grep { abs_path($_) ne abs_path($topdir) } @skipped;
+       showstats("bootstrap");
+       exitstats();
+}
+

 # alias expansion and command stemming
 sub expandaction {
        my $action=shift;
 # alias expansion and command stemming
 sub expandaction {
        my $action=shift;


@@ -1141,21 +1724,36 @@ sub expandaction {
        return $action;
 }
 
        return $action;
 }
 

+sub find_mrconfig {
+       my $dir=getcwd();
+       while (length $dir) {
+               if (-e "$dir/.mrconfig") {
+                       return "$dir/.mrconfig";
+               }
+               $dir=~s/\/[^\/]*$//;
+       }
+       return "$ENV{HOME}/.mrconfig";
+}
+

 sub getopts {
        my @saved=@ARGV;
        Getopt::Long::Configure("bundling", "no_permute");
        my $result=GetOptions(
                "d|directory=s" => sub { $directory=abs_path($_[1]) },
                "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
 sub getopts {
        my @saved=@ARGV;
        Getopt::Long::Configure("bundling", "no_permute");
        my $result=GetOptions(
                "d|directory=s" => sub { $directory=abs_path($_[1]) },
                "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },

+               "p|path" => sub { }, # now default, ignore
+               "f|force" => \$force,

                "v|verbose" => \$verbose,
                "q|quiet" => \$quiet,
                "s|stats" => \$stats,
                "v|verbose" => \$verbose,
                "q|quiet" => \$quiet,
                "s|stats" => \$stats,

+               "k|insecure" => \$insecure,

                "i|interactive" => \$interactive,
                "n|no-recurse:i" => \$max_depth,
                "j|jobs:i" => \$jobs,
                "i|interactive" => \$interactive,
                "n|no-recurse:i" => \$max_depth,
                "j|jobs:i" => \$jobs,

+               "t|trust-all" => \$trust_all,

        );
        if (! $result || @ARGV < 1) {
        );
        if (! $result || @ARGV < 1) {

-               die("Usage: mr [-d directory] action [params ...]\n".
+               die("Usage: mr [options] action [params ...]\n".

                    "(Use mr help for man page.)\n");
        }
        
                    "(Use mr help for man page.)\n");
        }
        


@@ -1189,28 +1787,30 @@ sub init {
                $ENV{MR_PATH}=$Bin."/".$Script;
        };
 }
                $ENV{MR_PATH}=$Bin."/".$Script;
        };
 }

+       
+sub exitstats {
+       if (@failed) {
+               exit 1;
+       }
+       else {
+               exit 0;
+       }
+}

 
 sub main {
        getopts();
        init();
 
 
 sub main {
        getopts();
        init();
 

-       loadconfig(\*DATA);
+       startingconfig();
+       loadconfig("$ENV{HOME}/.mrconfig");

        loadconfig($ENV{MR_CONFIG});
        #use Data::Dumper; print Dumper(\%config);
        
        my $action=expandaction(shift @ARGV);
        dispatch($action);
        loadconfig($ENV{MR_CONFIG});
        #use Data::Dumper; print Dumper(\%config);
        
        my $action=expandaction(shift @ARGV);
        dispatch($action);

-       showstats($action);

 
 

-       if (@failed) {
-               exit 1;
-       }
-       elsif (! @ok && @skipped) {
-               exit 1;
-       }
-       else {
-               exit 0;
-       }
+       showstats($action);
+       exitstats();

 }
 
 # Finally, some useful actions that mr knows about by default.
 }
 
 # Finally, some useful actions that mr knows about by default.


@@ -1238,7 +1838,7 @@ lib =
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
                fi
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
                fi

-               for dir in .git .svn .bzr CVS .hg _darcs; do
+               for dir in .git .svn .bzr CVS .hg _darcs _FOSSIL_; do

                        if [ -e "$MR_REPO/$dir" ]; then
                                flagfile="$MR_REPO/$dir/.mr_last$1"
                                break
                        if [ -e "$MR_REPO/$dir" ]; then
                                flagfile="$MR_REPO/$dir/.mr_last$1"
                                break


@@ -1249,19 +1849,30 @@ lib =
                fi
                delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
                if [ "$delta" -lt "$2" ]; then
                fi
                delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
                if [ "$delta" -lt "$2" ]; then

-                       exit 0
+                       return 1

                else
                        touch "$flagfile"
                else
                        touch "$flagfile"

-                       exit 1
+                       return 0
+               fi
+       }
+       is_bzr_checkout() {
+               LANG=C bzr info | egrep -q '^Checkout'
+       }
+       lazy() {
+               if [ -d "$MR_REPO" ]; then
+                       return 1
+               else
+                       return 0

                fi
        }
 
                fi
        }
 

-svn_test = test -d "$MR_REPO"/.svn
-git_test = test -d "$MR_REPO"/.git
-bzr_test = test -d "$MR_REPO"/.bzr
-cvs_test = test -d "$MR_REPO"/CVS
-hg_test  = test -d "$MR_REPO"/.hg
-darcs_test = test -d "$MR_REPO"/_darcs
+svn_dir_test = echo svn .svn
+git_dir_test = echo git .git
+bzr_dir_test = echo bzr .bzr
+cvs_dir_test = echo cvs CVS
+hg_dir_test  = echo hg .hg
+darcs_dir_test = echo darcs _darcs
+fossil_test = test -f "$MR_REPO"/_FOSSIL_

 git_bare_test =
        test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
        test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
 git_bare_test =
        test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
        test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&


@@ -1269,29 +1880,48 @@ git_bare_test =
 
 svn_update = svn update "$@"
 git_update = git pull "$@"
 
 svn_update = svn update "$@"
 git_update = git pull "$@"

-bzr_update = bzr merge "$@"
+bzr_update = 
+       if is_bzr_checkout; then
+               bzr update "$@"
+       else
+               bzr merge --pull "$@"
+       fi

 cvs_update = cvs update "$@"
 hg_update  = hg pull "$@" && hg update "$@"
 darcs_update = darcs pull -a "$@"
 cvs_update = cvs update "$@"
 hg_update  = hg pull "$@" && hg update "$@"
 darcs_update = darcs pull -a "$@"

+fossil_update = fossil pull "$@"

 
 svn_status = svn status "$@"
 
 svn_status = svn status "$@"

-git_status = git status "$@" || true
-bzr_status = bzr status "$@"
+git_status = git status -s "$@" || true
+bzr_status = bzr status --short "$@"

 cvs_status = cvs status "$@"
 hg_status  = hg status "$@"
 darcs_status = darcs whatsnew -ls "$@" || true
 cvs_status = cvs status "$@"
 hg_status  = hg status "$@"
 darcs_status = darcs whatsnew -ls "$@" || true

+fossil_status = fossil changes "$@"

 
 svn_commit = svn commit "$@"
 git_commit = git commit -a "$@" && git push --all
 
 svn_commit = svn commit "$@"
 git_commit = git commit -a "$@" && git push --all

-bzr_commit = bzr commit "$@" && bzr push
+bzr_commit = 
+       if is_bzr_checkout; then
+               bzr commit "$@"
+       else
+               bzr commit "$@" && bzr push
+       fi

 cvs_commit = cvs commit "$@"
 hg_commit  = hg commit -m "$@" && hg push
 darcs_commit = darcs record -a -m "$@" && darcs push -a
 cvs_commit = cvs commit "$@"
 hg_commit  = hg commit -m "$@" && hg push
 darcs_commit = darcs record -a -m "$@" && darcs push -a

+fossil_commit = fossil commit "$@"

 
 git_record = git commit -a "$@"
 
 git_record = git commit -a "$@"

-bzr_record = bzr commit "$@"
+bzr_record =
+       if is_bzr_checkout; then
+               bzr commit --local "$@"
+       else
+               bzr commit "$@"
+       fi

 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"
 hg_record  = hg commit -m "$@"
 darcs_record = darcs record -a -m "$@"

+fossil_record = fossil commit "$@"

 
 svn_push = :
 git_push = git push "$@"
 
 svn_push = :
 git_push = git push "$@"


@@ -1299,6 +1929,7 @@ bzr_push = bzr push "$@"
 cvs_push = :
 hg_push = hg push "$@"
 darcs_push = darcs push -a "$@"
 cvs_push = :
 hg_push = hg push "$@"
 darcs_push = darcs push -a "$@"

+fossil_push = fossil push "$@"

 
 svn_diff = svn diff "$@"
 git_diff = git diff "$@"
 
 svn_diff = svn diff "$@"
 git_diff = git diff "$@"


@@ -1306,6 +1937,7 @@ bzr_diff = bzr diff "$@"
 cvs_diff = cvs diff "$@"
 hg_diff  = hg diff "$@"
 darcs_diff = darcs diff -u "$@"
 cvs_diff = cvs diff "$@"
 hg_diff  = hg diff "$@"
 darcs_diff = darcs diff -u "$@"

+fossil_diff = fossil diff "$@"

 
 svn_log = svn log "$@"
 git_log = git log "$@"
 
 svn_log = svn log "$@"
 git_log = git log "$@"


@@ -1314,6 +1946,9 @@ cvs_log = cvs log "$@"
 hg_log  = hg log "$@"
 darcs_log = darcs changes "$@"
 git_bare_log = git log "$@"
 hg_log  = hg log "$@"
 darcs_log = darcs changes "$@"
 git_bare_log = git log "$@"

+fossil_log = fossil timeline "$@"
+
+run = "$@"

 
 svn_register =
        url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`
 
 svn_register =
        url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`


@@ -1335,7 +1970,7 @@ bzr_register =
                error "cannot determine bzr url"
        fi
        echo "Registering bzr url: $url in $MR_CONFIG"
                error "cannot determine bzr url"
        fi
        echo "Registering bzr url: $url in $MR_CONFIG"

-       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr branch '$url' '$MR_REPO'"

 cvs_register =
        repo=`cat CVS/Repository`
        root=`cat CVS/Root`
 cvs_register =
        repo=`cat CVS/Repository`
        root=`cat CVS/Root`


@@ -1359,17 +1994,45 @@ git_bare_register =
        fi
        echo "Registering git url: $url in $MR_CONFIG"
        mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
        fi
        echo "Registering git url: $url in $MR_CONFIG"
        mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"

+fossil_register =
+       url=`fossil remote-url`
+       repo=`fossil info | grep repository | sed -e 's/repository:*.//g' -e 's/ //g'`
+       echo "Registering fossil repository $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="mkdir -p '$MR_REPO' && cd '$MR_REPO' && fossil open '$repo'"
+
+svn_trusted_checkout = svn co $url $repo
+svn_alt_trusted_checkout = svn checkout $url $repo
+git_trusted_checkout = git clone $url $repo
+bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo
+# cvs: too hard
+hg_trusted_checkout = hg clone $url $repo
+darcs_trusted_checkout = darcs get $url $repo
+git_bare_trusted_checkout = git clone --bare $url $repo
+# fossil: messy to do
+

 
 help =
 
 help =

+       case `uname -s` in
+               SunOS)
+               SHOWMANFILE="man -f"
+               ;;
+               Darwin)
+               SHOWMANFILE="man"
+               ;;
+               *)
+               SHOWMANFILE="man -l"
+               ;;
+       esac

        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
        fi
        tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
        trap "rm -f $tmp" exit
        pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
        fi
        tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
        trap "rm -f $tmp" exit
        pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"

-       man -l "$tmp" || error "man failed"
+       $SHOWMANFILE "$tmp" || error "man failed"

 list = true
 config = 
 list = true
 config = 

+bootstrap = 

 
 online =
        if [ -s ~/.mrlog ]; then
 
 online =
        if [ -s ~/.mrlog ]; then


@@ -1401,3 +2064,7 @@ T = echo "I pity the fool."
 right = echo "Not found."
 
 # vim:sw=8:sts=0:ts=8:noet
 right = echo "Not found."
 
 # vim:sw=8:sts=0:ts=8:noet

+# Local variables:
+# indent-tabs-mode: t
+# cperl-indent-level: 8
+# End: