B<mr> [options] status
-B<mr> [options] commit -m "message"
+B<mr> [options] commit [-m "message"]
+
+B<mr> [options] record [-m "message"]
+
+B<mr> [options] diff
+
+B<mr> [options] log
+
+B<mr> [options] bootstrap url [directory]
+
+B<mr> [options] register [repository]
+
+B<mr> [options] config section ["parameter=[value]" ...]
B<mr> [options] action [params ...]
+B<mr> [options] [online|offline]
+
+B<mr> [options] remember action [params ...]
+
=head1 DESCRIPTION
-B<mr> is a Multiple Repository management tool. It allows you to register a
-set of repositories in a .mrconfig file, and then checkout, update, or
-perform other actions on all of the repositories at once.
+B<mr> is a Multiple Repository management tool. It can checkout, update, or
+perform other actions on a set of repositories as if they were one combined
+repository. It supports any combination of subversion, git, cvs, mercurial,
+bzr and darcs repositories, and support for other revision control systems can
+easily be added.
+
+B<mr> cds into and operates on all registered repositories at or below your
+working directory. Or, if you are in a subdirectory of a repository that
+contains no other registered repositories, it will stay in that directory,
+and work on only that repository,
+
+B<mr> is configured by .mrconfig files, which list the repositories. It
+starts by reading the .mrconfig file in your home directory, and this can
+in turn chain load .mrconfig files from repositories.
+
+These predefined commands should be fairly familiar to users of any revision
+control system:
+
+=over 4
+
+=item checkout (or co)
+
+Checks out any repositories that are not already checked out.
+
+=item update
+
+Updates each repository from its configured remote repository.
+
+If a repository isn't checked out yet, it will first check it out.
+
+=item status
+
+Displays a status report for each repository, showing what
+uncommitted changes are present in the repository.
+
+=item commit (or ci)
+
+Commits changes to each repository. (By default, changes are pushed to the
+remote repository too, when using distributed systems like git. If you
+don't like this default, you can change it in your .mrconfig, or use record
+instead.)
+
+The optional -m parameter allows specifying a commit message.
+
+=item record
+
+Records changes to the local repository, but does not push them to the
+remote repository. Only supported for distributed revision control systems.
+
+The optional -m parameter allows specifying a commit message.
+
+=item push
+
+Pushes committed local changes to the remote repository. A no-op for
+centralized revision control systems.
+
+=item diff
+
+Show a diff of uncommitted changes.
+
+=item log
+
+Show the commit log.
+
+=back
+
+These commands are also available:
+
+=over 4
+
+=item bootstrap url [directory]
+
+Causes mr to download the url, and use it as a .mrconfig file
+to checkout the repositories listed in it, into the specified directory.
+
+The directory will be created if it does not exist. If no directory is
+specified, the current directory will be used.
+
+If the .mrconfig file includes a repository named ".", that
+is checked out into the top of the specified directory.
+
+=item list (or ls)
+
+List the repositories that mr will act on.
+
+=item register
+
+Register an existing repository in a mrconfig file. By default, the
+repository in the current directory is registered, or you can specify a
+directory to register.
+
+The mrconfig file that is modified is chosen by either the -c option, or by
+looking for the closest known one at or below the current directory.
+
+=item config
+
+Adds, modifies, removes, or prints a value from a mrconfig file. The next
+parameter is the name of the section the value is in. To add or modify
+values, use one or more instances of "parameter=value". Use "parameter=" to
+remove a parameter. Use just "parameter" to get the value of a parameter.
+
+For example, to add (or edit) a repository in src/foo:
+
+ mr config src/foo checkout="svn co svn://example.com/foo/trunk foo"
+
+To show the command that mr uses to update the repository in src/foo:
+
+ mr config src/foo update
+
+To see the built-in library of shell functions contained in mr:
+
+ mr config DEFAULT lib
-Any mix of revision control systems can be used with B<mr>, and you can
-define arbitrary actions like "update", "checkout", or "commit".
+The ~/.mrconfig file is used by default. To use a different config file,
+use the -c option.
+
+=item offline
+
+Advises mr that it is in offline mode. Any commands that fail in
+offline mode will be remembered, and retried when mr is told it's online.
+
+=item online
+
+Advices mr that it is in online mode again. Commands that failed while in
+offline mode will be re-run.
+
+=item remember
+
+Remember a command, to be run later when mr re-enters online mode. This
+implicitly puts mr into offline mode. The command can be any regular mr
+command. This is useful when you know that a command will fail due to being
+offline, and so don't want to run it right now at all, but just remember
+to run it when you go back online.
+
+=item help
+
+Displays this help.
+
+=back
+
+Actions can be abbreviated to any unambiguous substring, so
+"mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr
+update"
+
+Additional parameters can be passed to most commands, and are passed on
+unchanged to the underlying revision control system. This is mostly useful
+if the repositories mr will act on all use the same revision control
+system.
=head1 OPTIONS
=item -d directory
+=item --directory directory
+
Specifies the topmost directory that B<mr> should work in. The default is
-the current working directory. B<mr> will operate on all registered
-repositories at or under the directory.
+the current working directory.
=item -c mrconfig
-Use the specified mrconfig file, instead of looking for on in your home
-directory.
+=item --config mrconfig
+
+Use the specified mrconfig file. The default is B<~/.mrconfig>
+
+=item -p
+
+=item --path
+
+Search in the current directory, and its parent directories and use
+the first B<.mrconfig> found, instead of the default B<~/.mrconfig>.
=item -v
+=item --verbose
+
Be verbose.
-=back
+=item -q
-=head1 FILES
+=item --quiet
-B<mr> is configured by .mrconfig files. It searches for .mrconfig files in
-your home directory, and in the root directory of each repository specified
-in a .mrconfig file. So you could have a ~/.mrconfig that registers a
-repository ~/src, that itself contains a ~/src/.mrconfig file, that in turn
-registers several additional repositories.
+Be quiet.
-The .mrconfig file uses a variant of the INI file format. Lines starting with
-"#" are comments. Lines ending with "\" are continued on to the next line.
-Sections specify where each repository is located, relative to the
-directory that contains the .mrconfig file.
+=item -s
-Within a section, each parameter defines a shell command to run to handle a
-given action. Note that these shell commands are run in a "set -e" shell
-environment, and B<mr> cds into the repository directory before running
-them, except for the "checkout" command, which is run in the parent of the
-repository directory, since the repository isn't checked out yet.
+=item --stats
+
+Expand the statistics line displayed at the end to include information
+about exactly which repositories failed and were skipped, if any.
+
+=item -i
+
+=item --interactive
+
+Interactive mode. If a repository fails to be processed, a subshell will be
+started which you can use to resolve or investigate the problem. Exit the
+subshell to continue the mr run.
+
+=item -n [number]
+
+=item --no-recurse [number]
-There are two special parameters. If the "skip" parameter is set and
-its command returns nonzero, then B<mr> will skip acting on that repository.
+If no number if specified, just operate on the repository for the current
+directory, do not recurse into deeper repositories.
-The "default" section allows setting up default handlers for each action,
-and is overridden by the contents of other sections. mr contains default
-handlers for the "update", "status", and "commit" actions, so normally
-you only need to specify what to do for "checkout".
+If a number is specified, will recurse into repositories at most that many
+subdirectories deep. For example, with -n 2 it would recurse into ./src/foo,
+but not ./src/packages/bar.
-For example:
+=item -j [number]
+
+=item --jobs [number]
+
+Run the specified number of jobs in parallel, or an unlimited number of jobs
+with no number specified. This can greatly speed up operations such as updates.
+It is not recommended for interactive operations.
+
+Note that running more than 10 jobs at a time is likely to run afoul of
+ssh connection limits. Running between 3 and 5 jobs at a time will yield
+a good speedup in updates without loading the machine too much.
+
+=item -t
+
+=item --trust-all
+
+Trust all mrconfig files even if they are not listed in ~/.mrtrust.
+Use with caution.
+
+=back
+
+=head1 "MRCONFIG FILES"
+
+Here is an example .mrconfig file:
[src]
checkout = svn co svn://svn.example.com/src/trunk src
+ chain = true
[src/linux-2.6]
- # only check this out on kodama
- skip = test $(hostname) != kodama
- checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git &&
+ cd linux-2.6 &&
+ git checkout -b mybranch origin/master
+
+The .mrconfig file uses a variant of the INI file format. Lines starting with
+"#" are comments. Values can be continued to the following line by
+indenting the line with whitespace.
+
+The "DEFAULT" section allows setting default values for the sections that
+come after it.
+
+The "ALIAS" section allows adding aliases for actions. Each parameter
+is an alias, and its value is the action to use.
+
+All other sections add repositories. The section header specifies the
+directory where the repository is located. This is relative to the directory
+that contains the mrconfig file, but you can also choose to use absolute
+paths. (Note that you can use environment variables in section names; they
+will be passed through the shell for expansion. For example,
+"[$HOSTNAME]", or "[${HOSTNAME}foo]")
+
+Within a section, each parameter defines a shell command to run to handle a
+given action. mr contains default handlers for "update", "status",
+"commit", and other standard actions. Normally you only need to specify what
+to do for "checkout".
+
+Note that these shell commands are run in a "set -e" shell
+environment, where any additional parameters you pass are available in
+"$@". The "checkout" command is run in the parent of the repository
+directory, since the repository isn't checked out yet. All other commands
+are run inside the repository, though not necessarily at the top of it.
+
+The "MR_REPO" environment variable is set to the path to the top of the
+repository. (For the "register" action, "MR_REPO" is instead set to the
+basename of the directory that should be created when checking the
+repository out.)
+
+The "MR_CONFIG" environment variable is set to the .mrconfig file
+that defines the repo being acted on, or, if the repo is not yet in a config
+file, the .mrconfig file that should be modified to register the repo.
+
+A few parameters have special meanings:
+
+=over 4
+
+=item skip
+
+If the "skip" parameter is set and its command returns true, then B<mr>
+will skip acting on that repository. The command is passed the action
+name in $1.
+
+Here are two examples. The first skips the repo unless
+mr is run by joey. The second uses the hours_since function
+(included in mr's built-in library) to skip updating the repo unless it's
+been at least 12 hours since the last update.
+
+ skip = test `whoami` != joey
+ skip = [ "$1" = update ] && ! hours_since "$1" 12
+
+=item order
+
+The "order" parameter can be used to override the default ordering of
+repositories. The default order value is 10. Use smaller values to make
+repositories be processed earlier, and larger values to make repositories
+be processed later.
+
+Note that if a repository is located in a subdirectory of another
+repository, ordering it to be processed earlier is not recommended.
+
+=item chain
+
+If the "chain" parameter is set and its command returns true, then B<mr>
+will try to load a .mrconfig file from the root of the repository.
+
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
+=item lib
+
+The "lib" parameter can specify some shell code that will be run before each
+command, this can be a useful way to define shell functions for other commands
+to use.
+
+=back
+
+When looking for a command to run for a given action, mr first looks for
+a parameter with the same name as the action. If that is not found, it
+looks for a parameter named "rcs_action" (substituting in the name of the
+revision control system and the action). The name of the revision control
+system is itself determined by running each defined "rcs_test" action,
+until one succeeds.
+
+Internally, mr has settings for "git_update", "svn_update", etc. To change
+the action that is performed for a given revision control system, you can
+override these rcs specific actions. To add a new revision control system,
+you can just add rcs specific actions for it.
+
+The ~/.mrlog file contains commands that mr has remembered to run later,
+due to being offline. You can delete or edit this file to remove commands,
+or even to add other commands for 'mr online' to run. If the file is
+present, mr assumes it is in offline mode.
+
+=head "UNTRUSTED MRCONFIG FILES"
+
+Since mrconfig files can contain arbitrary shell commands, they can do
+anything. This flexability is good, but it also allows a malicious mrconfig
+file to delete your whole home directory. Such a file might be contained
+inside a repository that your main ~/.mrconfig checks out and chains to. To
+avoid worries about evil commands in a mrconfig file, mr
+has the ability to read mrconfig files in untrusted mode. Such files are
+limited to running only known safe commands (like "git clone") in a
+carefully checked manner.
+
+By default, mr trusts all mrconfig files. (This default will change in a
+future release!) But if you have a ~/.mrtrust file, mr will only trust
+mrconfig files that are listed within it. (One file per line.) All other
+files will be treated as untrusted.
+
+=head1 EXTENSIONS
+
+mr can be extended to support things such as unison and git-svn. Some
+files providing such extensions are available in /usr/share/mr/. See
+the documentation in the files for details about using them.
=head1 AUTHOR
-Copyright 2007 Joey Hess <joey@kitenet.net>
+Copyright 2007-2009 Joey Hess <joey@kitenet.net>
Licensed under the GNU GPL version 2 or higher.
use Getopt::Long;
use Cwd qw(getcwd abs_path);
-my $directory=getcwd();
-my $config="$ENV{HOME}/.mrconfig";
+# things that can happen when mr runs a command
+use constant {
+ OK => 0,
+ FAILED => 1,
+ SKIPPED => 2,
+ ABORT => 3,
+};
+
+# configurables
+my $config_overridden=0;
my $verbose=0;
+my $quiet=0;
+my $stats=0;
+my $interactive=0;
+my $max_depth;
+my $no_chdir=0;
+my $jobs=1;
+my $trust_all=0;
+my $directory=getcwd();
+$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+# globals :-(
my %config;
+my %configfiles;
+my %knownactions;
+my %alias;
+my (@ok, @failed, @skipped);
+
+main();
+
+my %rcs;
+sub rcs_test {
+ my ($action, $dir, $topdir, $subdir) = @_;
+
+ if (exists $rcs{$dir}) {
+ return $rcs{$dir};
+ }
-Getopt::Long::Configure("no_permute");
-my $result=GetOptions(
- "d=s" => sub { $directory=abs_path($_[1]) },
- "c=s" => \$config,
- "v" => \$verbose,
-);
-if (! $result || @ARGV < 1) {
- die("Usage: mr [-d directory] action [params ...]\n");
+ my $test="set -e\n";
+ foreach my $rcs_test (
+ sort {
+ length $a <=> length $b
+ ||
+ $a cmp $b
+ } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
+ my ($rcs)=$rcs_test=~/(.*)_test/;
+ $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
+ $test.="if my_$rcs_test; then echo $rcs; fi\n";
+ }
+ $test=$config{$topdir}{$subdir}{lib}."\n".$test
+ if exists $config{$topdir}{$subdir}{lib};
+
+ print "mr $action: running rcs test >>$test<<\n" if $verbose;
+ my $rcs=`$test`;
+ chomp $rcs;
+ if ($rcs=~/\n/s) {
+ $rcs=~s/\n/, /g;
+ print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n";
+ return undef;
+ }
+ if (! length $rcs) {
+ return $rcs{$dir}=undef;
+ }
+ else {
+ return $rcs{$dir}=$rcs;
+ }
}
-my $action=shift @ARGV;
-
-loadconfig(\*DATA);
-loadconfig($config);
-#use Data::Dumper;
-#print Dumper(\%config);
-
-my (@failures, @successes, @skipped);
-my $first=1;
-foreach my $topdir (sort keys %config) {
- foreach my $subdir (sort keys %{$config{$topdir}}) {
- next if $subdir eq 'default';
-
- my $dir=$topdir.$subdir;
+
+sub findcommand {
+ my ($action, $dir, $topdir, $subdir, $is_checkout) = @_;
+
+ if (exists $config{$topdir}{$subdir}{$action}) {
+ return $config{$topdir}{$subdir}{$action};
+ }
- if (defined $directory &&
- $dir !~ /^\Q$directory\E\//) {
- print "mr $action: $dir skipped per -d parameter ($directory)\n" if $verbose;
- push @skipped, $dir;
- next;
- }
+ if ($is_checkout) {
+ return undef;
+ }
- print "\n" unless $first;
- $first=0;
+ my $rcs=rcs_test(@_);
- if (exists $config{$topdir}{$subdir}{skip}) {
- my $ret=system($config{$topdir}{$subdir}{skip});
- if ($ret >> 8 == 0) {
- print "mr $action: $dir skipped per config file\n" if $verbose;
- push @skipped, $dir;
- next;
+ if (defined $rcs &&
+ exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
+ return $config{$topdir}{$subdir}{$rcs."_".$action};
+ }
+ else {
+ return undef;
+ }
+}
+
+sub action {
+ my ($action, $dir, $topdir, $subdir, $force_checkout) = @_;
+
+ $ENV{MR_CONFIG}=$configfiles{$topdir};
+ my $lib=exists $config{$topdir}{$subdir}{lib} ?
+ $config{$topdir}{$subdir}{lib}."\n" : "";
+ my $is_checkout=($action eq 'checkout');
+
+ $ENV{MR_REPO}=$dir;
+
+ if ($is_checkout) {
+ if (! $force_checkout) {
+ if (-d $dir) {
+ print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
+ return SKIPPED;
}
+
+ $dir=~s/^(.*)\/[^\/]+\/?$/$1/;
+ }
+ }
+ elsif ($action =~ /update/) {
+ if (! -d $dir) {
+ return action("checkout", $dir, $topdir, $subdir);
}
+ }
- if ($action eq 'checkout') {
- if (-e $dir) {
- print "mr $action: $dir already exists, skipping checkout\n";
- push @skipped, $dir;
- next;
+ my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);
+ my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
+
+ if (defined $skiptest) {
+ my $test="set -e;".$lib.
+ "my_action(){ $skiptest\n }; my_action '$action'";
+ print "mr $action: running skip test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ return ABORT;
}
- $dir=~s/^(.*)\/[^\/]+\/?$/$1/;
+ elsif ($? & 127) {
+ print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
+ return ABORT;
+ }
+ }
+ if ($ret >> 8 == 0) {
+ print "mr $action: $dir skipped per config file\n" if $verbose;
+ return SKIPPED;
}
- if (! chdir($dir)) {
- print STDERR "mr $action: failed to chdir to $dir: $!\n";
- push @skipped, $dir;
+ }
+
+ if ($is_checkout && ! -d $dir) {
+ print "mr $action: creating parent directory $dir\n" if $verbose;
+ system("mkdir", "-p", $dir);
+ }
+
+ if (! $no_chdir && ! chdir($dir)) {
+ print STDERR "mr $action: failed to chdir to $dir: $!\n";
+ return FAILED;
+ }
+ elsif (! defined $command) {
+ my $rcs=rcs_test(@_);
+ if (! defined $rcs) {
+ print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n";
+ return FAILED;
+ }
+ else {
+ print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n";
+ return SKIPPED;
}
- elsif (! exists $config{$topdir}{$subdir}{$action}) {
- print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
- push @skipped, $dir;
+ }
+ else {
+ if (! $no_chdir) {
+ print "mr $action: $topdir$subdir\n" unless $quiet;
}
else {
- print "mr $action: in $dir\n";
- my $command="set -e; my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action @ARGV";
- my $ret=system($command);
- if ($ret != 0) {
- print STDERR "mr $action: failed to run: $command\n" if $verbose;
- push @failures, $topdir.$subdir;
- if ($ret >> 8 != 0) {
- print STDERR "mr $action: command failed\n";
- }
- elsif ($ret != 0) {
- print STDERR "mr $action: command died ($ret)\n";
+ my $s=$directory;
+ $s=~s/^\Q$topdir$subdir\E\/?//;
+ print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet;
+ }
+ $command="set -e; ".$lib.
+ "my_action(){ $command\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print "mr $action: running >>$command<<\n" if $verbose;
+ my $ret=system($command);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ return ABORT;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: received signal ".($? & 127)."\n";
+ return ABORT;
+ }
+ print STDERR "mr $action: failed ($ret)\n" if $verbose;
+ if ($ret >> 8 != 0) {
+ print STDERR "mr $action: command failed\n";
+ if (-e "$ENV{HOME}/.mrlog" && $action ne 'remember') {
+ # recreate original command line to
+ # remember, and avoid recursing
+ my @orig=@ARGV;
+ @ARGV=('-n', $action, @orig);
+ action("remember", $dir, $topdir, $subdir);
+ @ARGV=@orig;
}
}
- else {
- push @successes, $dir;
+ elsif ($ret != 0) {
+ print STDERR "mr $action: command died ($ret)\n";
+ }
+ return FAILED;
+ }
+ else {
+ if ($action eq 'checkout' && ! -d $dir) {
+ print STDERR "mr $action: $dir missing after checkout\n";;
+ return FAILED;
+ }
+
+ return OK;
+ }
+ }
+}
+
+# run actions on multiple repos, in parallel
+sub mrs {
+ my $action=shift;
+ my @repos=@_;
+
+ $| = 1;
+ my @active;
+ my @fhs;
+ my @out;
+ my $running=0;
+ while (@fhs or @repos) {
+ while ((!$jobs || $running < $jobs) && @repos) {
+ $running++;
+ my $repo = shift @repos;
+ pipe(my $outfh, CHILD_STDOUT);
+ pipe(my $errfh, CHILD_STDERR);
+ my $pid;
+ unless ($pid = fork) {
+ die "mr $action: cannot fork: $!" unless defined $pid;
+ open(STDOUT, ">&CHILD_STDOUT") || die "mr $action cannot reopen stdout: $!";
+ open(STDERR, ">&CHILD_STDERR") || die "mr $action cannot reopen stderr: $!";
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ close $outfh;
+ close $errfh;
+ exit action($action, @$repo);
+ }
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ push @active, [$pid, $repo];
+ push @fhs, [$outfh, $errfh];
+ push @out, ['', ''];
+ }
+ my ($rin, $rout) = ('','');
+ my $nfound;
+ foreach my $fh (@fhs) {
+ next unless defined $fh;
+ vec($rin, fileno($fh->[0]), 1) = 1 if defined $fh->[0];
+ vec($rin, fileno($fh->[1]), 1) = 1 if defined $fh->[1];
+ }
+ $nfound = select($rout=$rin, undef, undef, 1);
+ foreach my $channel (0, 1) {
+ foreach my $i (0..$#fhs) {
+ next unless defined $fhs[$i];
+ my $fh = $fhs[$i][$channel];
+ next unless defined $fh;
+ if (vec($rout, fileno($fh), 1) == 1) {
+ my $r = '';
+ if (sysread($fh, $r, 1024) == 0) {
+ close($fh);
+ $fhs[$i][$channel] = undef;
+ if (! defined $fhs[$i][0] &&
+ ! defined $fhs[$i][1]) {
+ waitpid($active[$i][0], 0);
+ print STDOUT $out[$i][0];
+ print STDERR $out[$i][1];
+ record($active[$i][1], $? >> 8);
+ splice(@fhs, $i, 1);
+ splice(@active, $i, 1);
+ splice(@out, $i, 1);
+ $running--;
+ }
+ }
+ $out[$i][$channel] .= $r;
+ }
}
}
}
}
+sub record {
+ my $dir=shift()->[0];
+ my $ret=shift;
+
+ if ($ret == OK) {
+ push @ok, $dir;
+ print "\n";
+ }
+ elsif ($ret == FAILED) {
+ if ($interactive) {
+ chdir($dir) unless $no_chdir;
+ print STDERR "mr: Starting interactive shell. Exit shell to continue.\n";
+ system((getpwuid($<))[8], "-i");
+ }
+ push @failed, $dir;
+ print "\n";
+ }
+ elsif ($ret == SKIPPED) {
+ push @skipped, $dir;
+ }
+ elsif ($ret == ABORT) {
+ exit 1;
+ }
+ else {
+ die "unknown exit status $ret";
+ }
+}
+
+sub showstats {
+ my $action=shift;
+ if (! @ok && ! @failed && ! @skipped) {
+ die "mr $action: no repositories found to work on\n";
+ }
+ print "mr $action: finished (".join("; ",
+ showstat($#ok+1, "ok", "ok"),
+ showstat($#failed+1, "failed", "failed"),
+ showstat($#skipped+1, "skipped", "skipped"),
+ ).")\n" unless $quiet;
+ if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet;
+ }
+ if (@failed) {
+ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+ }
+}
+
sub showstat {
my $count=shift;
my $singular=shift;
}
return;
}
-print "\nmr $action: finished (".join("; ",
- showstat($#successes+1, "success", "successes"),
- showstat($#failures+1, "failure", "failures"),
- showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-exit @failures ? 1 : 0;
+
+# an ordered list of repos
+sub repolist {
+ my @list;
+ foreach my $topdir (sort keys %config) {
+ foreach my $subdir (sort keys %{$config{$topdir}}) {
+ push @list, {
+ topdir => $topdir,
+ subdir => $subdir,
+ order => $config{$topdir}{$subdir}{order},
+ };
+ }
+ }
+ return sort {
+ $a->{order} <=> $b->{order}
+ ||
+ $a->{topdir} cmp $b->{topdir}
+ ||
+ $a->{subdir} cmp $b->{subdir}
+ } @list;
+}
+
+# figure out which repos to act on
+sub selectrepos {
+ my @repos;
+ foreach my $repo (repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ next if $dir ne $d && $dir !~ /^\Q$d\E/;
+ if (defined $max_depth) {
+ my @a=split('/', $dir);
+ my @b=split('/', $d);
+ do { } while (@a && @b && shift(@a) eq shift(@b));
+ next if @a > $max_depth || @b > $max_depth;
+ }
+ push @repos, [$dir, $topdir, $subdir];
+ }
+ if (! @repos) {
+ # fallback to find a leaf repo
+ foreach my $repo (reverse repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ if ($d=~/^\Q$dir\E/) {
+ push @repos, [$dir, $topdir, $subdir];
+ last;
+ }
+ }
+ $no_chdir=1;
+ }
+ return @repos;
+}
+
+sub expandenv {
+ my $val=shift;
+
+
+ if ($val=~/\$/) {
+ $val=`echo "$val"`;
+ chomp $val;
+ }
+
+ return $val;
+}
+
+my %trusted;
+sub is_trusted_config {
+ my $config=shift; # must be abs_pathed already
+
+ # We always trust ~/.mrconfig.
+ return 1 if $config eq abs_path("$ENV{HOME}/.mrconfig");
+
+ return 1 if $trust_all;
+
+ my $trustfile=$ENV{HOME}."/.mrtrust";
+
+ if (! -e $trustfile) {
+ print "mr: Assuming $config is trusted.\n";
+ print "mr: For better security, you are encouraged to create ~/.mrtrust\n";
+ print "mr: and list all trusted mrconfig files in it.\n";
+ return 1;
+ }
+
+ if (! %trusted) {
+ $trusted{"$ENV{HOME}/.mrconfig"}=1;
+ open (TRUST, "<", $trustfile) || die "$trustfile: $!";
+ while (<TRUST>) {
+ chomp;
+ s/^~\//$ENV{HOME}\//;
+ $trusted{abs_path($_)}=1;
+ }
+ close TRUST;
+ }
+
+ return $trusted{$config};
+}
+
+
+sub is_trusted_repo {
+ my $repo=shift;
+
+ # Tightly limit what is allowed in a repo name.
+ # No ../, no absolute paths, and no unusual filenames
+ # that might try to escape to the shell.
+ return $repo =~ /^[-_.+\/A-Za-z0-9]+$/ &&
+ $repo !~ /\.\./ && $repo !~ /^\//;
+}
+
+sub is_trusted_checkout {
+ my $command=shift;
+
+ # To determine if the command is safe, compare it with the
+ # *_trusted_checkout config settings. Those settings are
+ # templates for allowed commands, so make sure that each word
+ # of the command matches the corresponding word of the template.
+
+ my @words;
+ foreach my $word (split(' ', $command)) {
+ # strip quoting
+ if ($word=~/^'(.*)'$/) {
+ $word=$1;
+ }
+ elsif ($word=~/^"(.*)"$/) {
+ $word=$1;
+ }
+
+ push @words, $word;
+ }
+
+ foreach my $key (grep { /_trusted_checkout$/ }
+ keys %{$config{''}{DEFAULT}}) {
+ my @twords=split(' ', $config{''}{DEFAULT}{$key});
+ next if @words > @twords;
+
+ my $match=1;
+ my $url;
+ for (my $c=0; $c < @twords && $match; $c++) {
+ if ($twords[$c] eq '$url') {
+ # Match all the typical characters found in
+ # urls, plus @ which svn can use. Note
+ # that the "url" might also be a local
+ # directory.
+ $match=(
+ defined $words[$c] &&
+ $words[$c] =~ /^[-_.+:@\/A-Za-z0-9]+$/
+ );
+ $url=$words[$c];
+ }
+ elsif ($twords[$c] eq '$repo') {
+ # If a repo is not specified, assume it
+ # will be the last path component of the
+ # url, or something derived from it, and
+ # check that.
+ if (! defined $words[$c] && defined $url) {
+ ($words[$c])=$url=~/\/([^\/]+)\/?$/;
+ }
+
+ $match=(
+ defined $words[$c] &&
+ is_trusted_repo($words[$c])
+ );
+ }
+ elsif (defined $words[$c] && $twords[$c] eq $words[$c]) {
+ $match=1;
+ }
+ else {
+ $match=0;
+ }
+ }
+ return 1 if $match;
+ }
+
+ return 0;
+}
my %loaded;
sub loadconfig {
my $f=shift;
+ my $dir=shift;
my @toload;
my $in;
- my $dir;
+ my $trusted;
if (ref $f eq 'GLOB') {
- $in=$f;
$dir="";
+ $in=$f;
+ $trusted=1;
}
else {
- # $f might be a symlink
+ if (! -e $f) {
+ return;
+ }
+
my $absf=abs_path($f);
if ($loaded{$absf}) {
return;
}
$loaded{$absf}=1;
- print "mr: loading config $f\n" if $verbose;
- open($in, "<", $f) || die "mr: open $f: $!\n";
- ($dir)=$f=~/^(.*\/)[^\/]+$/;
+ $trusted=is_trusted_config($absf);
+
+ if (! defined $dir) {
+ ($dir)=$f=~/^(.*\/)[^\/]+$/;
+ if (! defined $dir) {
+ $dir=".";
+ }
+ }
+
$dir=abs_path($dir)."/";
+
+ if (! exists $configfiles{$dir}) {
+ $configfiles{$dir}=$f;
+ }
# copy in defaults from first parent
my $parent=$dir;
- while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
+ while ($parent=~s/^(.*\/)[^\/]+\/?$/$1/) {
+ if ($parent eq '/') {
+ $parent="";
+ }
if (exists $config{$parent} &&
- exists $config{$parent}{default}) {
- $config{$dir}{default}={ %{$config{$parent}{default}} };
+ exists $config{$parent}{DEFAULT}) {
+ $config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };
last;
}
}
+
+ print "mr: loading config $f\n" if $verbose;
+ open($in, "<", $f) || die "mr: open $f: $!\n";
}
+ my @lines=<$in>;
+ close $in;
my $section;
- while (<$in>) {
+ my $line=0;
+ while (@lines) {
+ $_=shift @lines;
+ $line++;
chomp;
next if /^\s*\#/ || /^\s*$/;
- if (/^\s*\[([^\]]*)\]\s*$/) {
+ if (/^\[([^\]]*)\]\s*$/) {
$section=$1;
- if (length $dir && $section ne "default" &&
- -e $dir.$section."/.mrconfig") {
- push @toload, $dir.$section."/.mrconfig";
- }
+
+ if (! $trusted) {
+ if (! is_trusted_repo($section) ||
+ $section eq 'ALIAS' ||
+ $section eq 'DEFAULT') {
+ die "mr: illegal section \"[$section]\" in untrusted $f line $line\n";
+ }
+ }
+ $section=expandenv($section) if $trusted;
}
- elsif (/^\s*(\w+)\s*=\s*(.*)/) {
+ elsif (/^(\w+)\s*=\s*(.*)/) {
my $parameter=$1;
my $value=$2;
- # continuation line
- while ($value=~/(.*)\\$/) {
- $value=$1.<$in>;
+ # continued value
+ while (@lines && $lines[0]=~/^\s(.+)/) {
+ shift(@lines);
+ $line++;
+ $value.="\n$1";
chomp $value;
}
+ if (! $trusted) {
+ # Untrusted files can only contain checkout
+ # parameters.
+ if ($parameter ne 'checkout') {
+ die "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line\n";
+ }
+ if (! is_trusted_checkout($value)) {
+ die "mr: illegal checkout command \"$value\" in untrusted $f line $line\n";
+ }
+ }
+
+ if ($parameter eq "include") {
+ print "mr: including output of \"$value\"\n" if $verbose;
+ unshift @lines, `$value`;
+ if ($?) {
+ print STDERR "mr: include command exited nonzero ($?)\n";
+ }
+ next;
+ }
+
if (! defined $section) {
die "$f line $.: parameter ($parameter) not in section\n";
}
- if (! exists $config{$dir}{$section} &&
- exists $config{$dir}{default}) {
+ if ($section ne 'ALIAS' &&
+ ! exists $config{$dir}{$section} &&
+ exists $config{$dir}{DEFAULT}) {
# copy in defaults
- $config{$dir}{$section}={ %{$config{$dir}{default}} };
+ $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };
+ }
+ if ($section eq 'ALIAS') {
+ $alias{$parameter}=$value;
+ }
+ elsif ($parameter eq 'lib') {
+ $config{$dir}{$section}{lib}.=$value."\n";
+ }
+ else {
+ $config{$dir}{$section}{$parameter}=$value;
+ if ($parameter =~ /.*_(.*)/) {
+ $knownactions{$1}=1;
+ }
+ else {
+ $knownactions{$parameter}=1;
+ }
+ if ($parameter eq 'chain' &&
+ length $dir && $section ne "DEFAULT" &&
+ -e $dir.$section."/.mrconfig") {
+ my $ret=system($value);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr: chain test interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr: chain test received signal ".($? & 127)."\n";
+ }
+ }
+ else {
+ push @toload, $dir.$section."/.mrconfig";
+ }
+ }
}
- $config{$dir}{$section}{$parameter}=$value;
}
else {
- die "$f line $.: parse error\n";
+ die "$f line $line: parse error\n";
}
}
- close $in;
foreach (@toload) {
loadconfig($_);
}
}
-__DATA__
-# Some useful actions that mr knows about by default.
+sub modifyconfig {
+ my $f=shift;
+ # the section to modify or add
+ my $targetsection=shift;
+ # fields to change in the section
+ # To remove a field, set its value to "".
+ my %changefields=@_;
+
+ my @lines;
+ my @out;
+
+ if (-e $f) {
+ open(my $in, "<", $f) || die "mr: open $f: $!\n";
+ @lines=<$in>;
+ close $in;
+ }
+
+ my $formatfield=sub {
+ my $field=shift;
+ my @value=split(/\n/, shift);
+
+ return "$field = ".shift(@value)."\n".
+ join("", map { "\t$_\n" } @value);
+ };
+ my $addfields=sub {
+ my @blanks;
+ while ($out[$#out] =~ /^\s*$/) {
+ unshift @blanks, pop @out;
+ }
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, "$field = $changefields{$field}\n";
+ delete $changefields{$field};
+ }
+ }
+ push @out, @blanks;
+ };
+
+ my $section;
+ while (@lines) {
+ $_=shift(@lines);
+
+ if (/^\s*\#/ || /^\s*$/) {
+ push @out, $_;
+ }
+ elsif (/^\[([^\]]*)\]\s*$/) {
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+
+ $section=expandenv($1);
+
+ push @out, $_;
+ }
+ elsif (/^(\w+)\s*=\s(.*)/) {
+ my $parameter=$1;
+ my $value=$2;
+
+ # continued value
+ while (@lines && $lines[0]=~/^\s(.+)/) {
+ shift(@lines);
+ $value.="\n$1";
+ chomp $value;
+ }
+
+ if ($section eq $targetsection) {
+ if (exists $changefields{$parameter}) {
+ if (length $changefields{$parameter}) {
+ $value=$changefields{$parameter};
+ }
+ delete $changefields{$parameter};
+ }
+ }
+
+ push @out, $formatfield->($parameter, $value);
+ }
+ }
+
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+ elsif (%changefields) {
+ push @out, "\n[$targetsection]\n";
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, $formatfield->($field, $changefields{$field});
+ }
+ }
+ }
+
+ open(my $out, ">", $f) || die "mr: write $f: $!\n";
+ print $out @out;
+ close $out;
+}
+
+sub dispatch {
+ my $action=shift;
+
+ # actions that do not operate on all repos
+ if ($action eq 'help') {
+ help(@ARGV);
+ }
+ elsif ($action eq 'config') {
+ config(@ARGV);
+ }
+ elsif ($action eq 'register') {
+ register(@ARGV);
+ }
+ elsif ($action eq 'bootstrap') {
+ bootstrap();
+ }
+ elsif ($action eq 'remember' ||
+ $action eq 'offline' ||
+ $action eq 'online') {
+ my @repos=selectrepos;
+ action($action, @{$repos[0]}) if @repos;
+ exit 0;
+ }
+
+ if (!$jobs || $jobs > 1) {
+ mrs($action, selectrepos());
+ }
+ else {
+ foreach my $repo (selectrepos()) {
+ record($repo, action($action, @$repo));
+ }
+ }
+}
+
+sub help {
+ exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+}
+
+sub config {
+ if (@_ < 2) {
+ die "mr config: not enough parameters\n";
+ }
+ my $section=shift;
+ if ($section=~/^\//) {
+ # try to convert to a path relative to the config file
+ my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
+ $dir=abs_path($dir);
+ $dir.="/" unless $dir=~/\/$/;
+ if ($section=~/^\Q$dir\E(.*)/) {
+ $section=$1;
+ }
+ }
+ my %changefields;
+ foreach (@_) {
+ if (/^([^=]+)=(.*)$/) {
+ $changefields{$1}=$2;
+ }
+ else {
+ my $found=0;
+ foreach my $topdir (sort keys %config) {
+ if (exists $config{$topdir}{$section} &&
+ exists $config{$topdir}{$section}{$_}) {
+ print $config{$topdir}{$section}{$_}."\n";
+ $found=1;
+ last if $section eq 'DEFAULT';
+ }
+ }
+ if (! $found) {
+ die "mr config: $section $_ not set\n";
+ }
+ }
+ }
+ modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
+ exit 0;
+}
+
+sub register {
+ if ($config_overridden) {
+ # Find the directory that the specified config file is
+ # located in.
+ ($directory)=abs_path($ENV{MR_CONFIG})=~/^(.*\/)[^\/]+$/;
+ }
+ else {
+ # Find the closest known mrconfig file to the current
+ # directory.
+ $directory.="/" unless $directory=~/\/$/;
+ my $foundconfig=0;
+ foreach my $topdir (reverse sort keys %config) {
+ next unless length $topdir;
+ if ($directory=~/^\Q$topdir\E/) {
+ $ENV{MR_CONFIG}=$configfiles{$topdir};
+ $directory=$topdir;
+ $foundconfig=1;
+ last;
+ }
+ }
+ if (! $foundconfig) {
+ $directory=""; # no config file, use builtin
+ }
+ }
+ if (@ARGV) {
+ my $subdir=shift @ARGV;
+ if (! chdir($subdir)) {
+ print STDERR "mr register: failed to chdir to $subdir: $!\n";
+ }
+ }
+
+ $ENV{MR_REPO}=getcwd();
+ my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT', 0);
+ if (! defined $command) {
+ die "mr register: unknown repository type\n";
+ }
+
+ $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+ $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+ "my_action(){ $command\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print "mr register: running >>$command<<\n" if $verbose;
+ exec($command) || die "exec: $!";
+}
+
+sub bootstrap {
+ my $url=shift @ARGV;
+ my $dir=shift @ARGV || ".";
+
+ if (! defined $url || ! length $url) {
+ die "mr: bootstrap requires url\n";
+ }
+
+ # Download the config file to a temporary location.
+ eval q{use File::Temp};
+ die $@ if $@;
+ my $tmpconfig=File::Temp->new();
+ if (system("curl", "-A", "mr", "-s", $url, "-o", $tmpconfig) != 0) {
+ die "mr: download of $url failed\n";
+ }
+
+ if (! -e $dir) {
+ system("mkdir", "-p", $dir);
+ }
+ chdir($dir) || die "chdir $dir: $!";
+
+ # Special case to handle checkout of the "." repo, which
+ # would normally be skipped.
+ my $topdir=abs_path(".")."/";
+ my @repo=($topdir, $topdir, ".");
+ loadconfig($tmpconfig, $topdir);
+ record(\@repo, action("checkout", @repo, 1))
+ if exists $config{$topdir}{"."}{"checkout"};
+
+ if (-e ".mrconfig") {
+ print STDERR "mr: .mrconfig file already exists, not overwriting with $url\n";
+ }
+ else {
+ rename($tmpconfig, ".mrconfig") || die "rename: $!";
+ }
+
+ exec("mr $ENV{MR_SWITCHES} -c .mrconfig checkout");
+ die "failed to run mr checkout";
+}
+
+# alias expansion and command stemming
+sub expandaction {
+ my $action=shift;
+ if (exists $alias{$action}) {
+ $action=$alias{$action};
+ }
+ if (! exists $knownactions{$action}) {
+ my @matches = grep { /^\Q$action\E/ }
+ keys %knownactions, keys %alias;
+ if (@matches == 1) {
+ $action=$matches[0];
+ }
+ elsif (@matches == 0) {
+ die "mr: unknown action \"$action\" (known actions: ".
+ join(", ", sort keys %knownactions).")\n";
+ }
+ else {
+ die "mr: ambiguous action \"$action\" (matches: ".
+ join(", ", @matches).")\n";
+ }
+ }
+ return $action;
+}
+
+sub find_nearest_mrconfig {
+ my $dir=getcwd();
+ while (length $dir) {
+ if (-e "$dir/.mrconfig") {
+ return "$dir/.mrconfig";
+ }
+ $dir=~s/\/[^\/]*$//;
+ }
+ die "no .mrconfig found in path\n";
+}
+
+sub getopts {
+ my @saved=@ARGV;
+ Getopt::Long::Configure("bundling", "no_permute");
+ my $result=GetOptions(
+ "d|directory=s" => sub { $directory=abs_path($_[1]) },
+ "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
+ "p|path" => sub { $ENV{MR_CONFIG}=find_nearest_mrconfig(); $config_overridden=1 },
+ "v|verbose" => \$verbose,
+ "q|quiet" => \$quiet,
+ "s|stats" => \$stats,
+ "i|interactive" => \$interactive,
+ "n|no-recurse:i" => \$max_depth,
+ "j|jobs:i" => \$jobs,
+ "t|trust-all" => \$trust_all,
+ );
+ if (! $result || @ARGV < 1) {
+ die("Usage: mr [options] action [params ...]\n".
+ "(Use mr help for man page.)\n");
+ }
+
+ $ENV{MR_SWITCHES}="";
+ foreach my $option (@saved) {
+ last if $option eq $ARGV[0];
+ $ENV{MR_SWITCHES}.="$option ";
+ }
+}
+
+sub init {
+ $SIG{INT}=sub {
+ print STDERR "mr: interrupted\n";
+ exit 2;
+ };
+
+ # This can happen if it's run in a directory that was removed
+ # or other strangeness.
+ if (! defined $directory) {
+ die("mr: failed to determine working directory\n");
+ }
+ # Make sure MR_CONFIG is an absolute path, but don't use abs_path since
+ # the config file might be a symlink to elsewhere, and the directory it's
+ # in is significant.
+ if ($ENV{MR_CONFIG} !~ /^\//) {
+ $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
+ }
+ # Try to set MR_PATH to the path to the program.
+ eval {
+ use FindBin qw($Bin $Script);
+ $ENV{MR_PATH}=$Bin."/".$Script;
+ };
+}
+
+sub main {
+ getopts();
+ init();
+
+ loadconfig(\*DATA);
+ loadconfig($ENV{MR_CONFIG});
+ #use Data::Dumper; print Dumper(\%config);
+
+ my $action=expandaction(shift @ARGV);
+ dispatch($action);
+ showstats($action);
+
+ if (@failed) {
+ exit 1;
+ }
+ elsif (! @ok && @skipped) {
+ exit 1;
+ }
+ else {
+ exit 0;
+ }
+}
+
+# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
-[default]
-update = \
- if [ -d .svn ]; then \
- svn update; \
- elif [ -d .git ]; then \
- git pull origin master; \
- else \
- echo "mr update: unknown RCS"; \
- exit 1; \
+__DATA__
+[ALIAS]
+co = checkout
+ci = commit
+ls = list
+
+[DEFAULT]
+order = 10
+lib =
+ error() {
+ echo "mr: $@" >&2
+ exit 1
+ }
+ warning() {
+ echo "mr (warning): $@" >&2
+ }
+ info() {
+ echo "mr: $@" >&2
+ }
+ hours_since() {
+ if [ -z "$1" ] || [ -z "$2" ]; then
+ error "mr: usage: hours_since action num"
+ fi
+ for dir in .git .svn .bzr CVS .hg _darcs; do
+ if [ -e "$MR_REPO/$dir" ]; then
+ flagfile="$MR_REPO/$dir/.mr_last$1"
+ break
+ fi
+ done
+ if [ -z "$flagfile" ]; then
+ error "cannot determine flag filename"
+ fi
+ delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
+ if [ "$delta" -lt "$2" ]; then
+ exit 0
+ else
+ touch "$flagfile"
+ exit 1
+ fi
+ }
+
+svn_test = test -d "$MR_REPO"/.svn
+git_test = test -d "$MR_REPO"/.git
+bzr_test = test -d "$MR_REPO"/.bzr
+cvs_test = test -d "$MR_REPO"/CVS
+hg_test = test -d "$MR_REPO"/.hg
+darcs_test = test -d "$MR_REPO"/_darcs
+git_bare_test =
+ test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
+ test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
+ test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true
+
+svn_update = svn update "$@"
+git_update = git pull "$@"
+bzr_update = bzr merge --pull "$@"
+cvs_update = cvs update "$@"
+hg_update = hg pull "$@" && hg update "$@"
+darcs_update = darcs pull -a "$@"
+
+svn_status = svn status "$@"
+git_status = git status "$@" || true
+bzr_status = bzr status "$@"
+cvs_status = cvs status "$@"
+hg_status = hg status "$@"
+darcs_status = darcs whatsnew -ls "$@" || true
+
+svn_commit = svn commit "$@"
+git_commit = git commit -a "$@" && git push --all
+bzr_commit = bzr commit "$@" && bzr push
+cvs_commit = cvs commit "$@"
+hg_commit = hg commit -m "$@" && hg push
+darcs_commit = darcs record -a -m "$@" && darcs push -a
+
+git_record = git commit -a "$@"
+bzr_record = bzr commit "$@"
+hg_record = hg commit -m "$@"
+darcs_record = darcs record -a -m "$@"
+
+svn_push = :
+git_push = git push "$@"
+bzr_push = bzr push "$@"
+cvs_push = :
+hg_push = hg push "$@"
+darcs_push = darcs push -a "$@"
+
+svn_diff = svn diff "$@"
+git_diff = git diff "$@"
+bzr_diff = bzr diff "$@"
+cvs_diff = cvs diff "$@"
+hg_diff = hg diff "$@"
+darcs_diff = darcs diff -u "$@"
+
+svn_log = svn log "$@"
+git_log = git log "$@"
+bzr_log = bzr log "$@"
+cvs_log = cvs log "$@"
+hg_log = hg log "$@"
+darcs_log = darcs changes "$@"
+git_bare_log = git log "$@"
+
+svn_register =
+ url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`
+ if [ -z "$url" ]; then
+ error "cannot determine svn url"
fi
-status = \
- if [ -d .svn ]; then \
- svn status; \
- elif [ -d .git ]; then \
- git status || true; \
- else \
- echo "mr status: unknown RCS"; \
- exit 1; \
+ echo "Registering svn url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
+git_register =
+ url="`LC_ALL=C git config --get remote.origin.url`" || true
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
fi
-commit = \
- if [ -d .svn ]; then \
- svn commit "$@"; \
- elif [ -d .git ]; then \
- git commit -a "$@"; \
- else \
- echo "mr commit: unknown RCS"; \
- exit 1; \
+ echo "Registering git url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
+bzr_register =
+ url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`"
+ if [ -z "$url" ]; then
+ error "cannot determine bzr url"
fi
+ echo "Registering bzr url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+cvs_register =
+ repo=`cat CVS/Repository`
+ root=`cat CVS/Root`
+ if [ -z "$root" ]; then
+ error "cannot determine cvs root"
+ fi
+ echo "Registering cvs repository $repo at root $root"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
+hg_register =
+ url=`hg showconfig paths.default`
+ echo "Registering mercurial repo url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
+darcs_register =
+ url=`cat _darcs/prefs/defaultrepo`
+ echo "Registering darcs repository $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url' '$MR_REPO'"
+git_bare_register =
+ url="`LC_ALL=C GIT_CONFIG=config git config --get remote.origin.url`" || true
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
+ fi
+ echo "Registering git url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+
+svn_trusted_checkout = svn co $url $repo
+svn_alt_trusted_checkout = svn checkout $url $repo
+git_trusted_checkout = git clone $url $repo
+bzr_trusted_checkout = bzr clone $url $repo
+# cvs: too hard
+hg_trusted_checkout = hg clone $url $repo
+darcs_trusted_checkout = darcs get $url $repo
+git_bare_trusted_checkout = git clone --bare $url $repo
+
+help =
+ if [ ! -e "$MR_PATH" ]; then
+ error "cannot find program path"
+ fi
+ tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
+ trap "rm -f $tmp" exit
+ pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
+ man -l "$tmp" || error "man failed"
+list = true
+config =
+bootstrap =
+
+online =
+ if [ -s ~/.mrlog ]; then
+ info "running offline commands"
+ mv -f ~/.mrlog ~/.mrlog.old
+ if ! sh -e ~/.mrlog.old; then
+ error "offline command failed; left in ~/.mrlog.old"
+ fi
+ rm -f ~/.mrlog.old
+ else
+ info "no offline commands to run"
+ fi
+offline =
+ umask 077
+ touch ~/.mrlog
+ info "offline mode enabled"
+remember =
+ info "remembering command: 'mr $@'"
+ command="mr -d '$(pwd)' $MR_SWITCHES"
+ for w in "$@"; do
+ command="$command '$w'"
+ done
+ if [ ! -e ~/.mrlog ] || ! grep -q -F "$command" ~/.mrlog; then
+ echo "$command" >> ~/.mrlog
+ fi
+
+ed = echo "A horse is a horse, of course, of course.."
+T = echo "I pity the fool."
+right = echo "Not found."
+
+# vim:sw=8:sts=0:ts=8:noet
projects / code / myrepos.git / blobdiff