B<mr> [options] register [repository]
-B<mr> [options] config section [parameter=[value] ...]
+B<mr> [options] config section ["parameter=[value]" ...]
B<mr> [options] action [params ...]
=head1 DESCRIPTION
-B<mr> is a Multiple Repository management tool. It
-can checkout, update, or perform other actions on
-a set of repositories as if they were one combined respository. It
-supports any combination of subversion, git, cvs, and bzr repositories,
-and support for other revision control systems can easily be added.
+B<mr> is a Multiple Repository management tool. It can checkout, update, or
+perform other actions on a set of repositories as if they were one combined
+respository. It supports any combination of subversion, git, cvs, mecurial and
+bzr repositories, and support for other revision control systems can easily be
+added.
B<mr> cds into and operates on all registered repositories at or below your
working directory. Or, if you are in a subdirectory of a repository that
mr config src/foo update
+To see the built-in library of shell functions contained in mr:
+
+ mr config DEFAULT lib
+
The ~/.mrconfig file is used by default. To use a different config file,
use the -c option.
Just operate on the repository for the current directory, do not
recurse into deeper repositories.
+=item -j number
+
+Run the specified number of jobs in parallel. This can greatly speed up
+operations such as updates. It is not recommended for interactive
+operations.
+
=back
=head1 FILES
paths.
Within a section, each parameter defines a shell command to run to handle a
-given action. mr contains default handlers for the "update", "status", and
-"commit" actions, so normally you only need to specify what to do for
-"checkout".
+given action. mr contains default handlers for "update", "status",
+"commit", and other standard actions. Normally you only need to specify what
+to do for "checkout".
Note that these shell commands are run in a "set -e" shell
environment, where any additional parameters you pass are available in
been at least 12 hours since the last update.
skip = test $(whoami) != joey
- skip = [ "$1" = update ] && [ $(hours_since "$1") -lt 12 ]
+ skip = [ "$1" = update ] && ! hours_since "$1" 12
+
+=item order
+
+The "order" parameter can be used to override the default ordering of
+repositories. The default order value is 10. Use smaller values to make
+repositories be processed earlier, and larger values to make repositories
+be processed later.
+
+Note that if a repository is located in a subdirectory of another
+repository, ordering it to be processed earlier is not recommended, as this
+can cause confusion during checkouts.
=item chain
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
-=item deleted
-
-If the "deleted" parameter is set and its command returns true, then
-B<mr> will treat the repository as deleted. It won't ever actually delete
-the repository, but it will warn if it sees the repository's directory.
-This is useful when one mrconfig file is shared amoung multiple machines,
-to keep track of and remember to delete old repositories.
-
=item lib
The "lib" parameter can specify some shell code that will be run before each
use strict;
use Getopt::Long;
use Cwd qw(getcwd abs_path);
+use POSIX "WNOHANG";
+use constant {
+ OK => 0,
+ FAILED => 1,
+ SKIPPED => 2,
+ ABORT => 3,
+};
$SIG{INT}=sub {
print STDERR "mr: interrupted\n";
my $verbose=0;
my $stats=0;
my $no_recurse=0;
+my $jobs=1;
my %config;
my %configfiles;
my %knownactions;
"v|verbose" => \$verbose,
"s|stats" => \$stats,
"n|no-recurse" => \$no_recurse,
+ "j|jobs=i" => \$jobs,
);
if (! $result || @ARGV < 1) {
die("Usage: mr [-d directory] action [params ...]\n".
if ($ENV{MR_CONFIG} !~ /^\//) {
$ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
}
+# Try to set MR_PATH to the path to the program.
+eval {
+ use FindBin qw($Bin $Script);
+ $ENV{MR_PATH}=$Bin."/".$Script;
+};
loadconfig(\*DATA);
loadconfig($ENV{MR_CONFIG});
#use Data::Dumper;
#print Dumper(\%config);
-eval {
- use FindBin qw($Bin $Script);
- $ENV{MR_PATH}=$Bin."/".$Script;
-};
-
# alias expansion and command stemming
my $action=shift @ARGV;
if (exists $alias{$action}) {
exists $config{$topdir}{$section}{$_}) {
print $config{$topdir}{$section}{$_}."\n";
$found=1;
+ last if $section eq 'DEFAULT';
}
}
if (! $found) {
exec($command) || die "exec: $!";
}
+# an ordered list of repos
+my @list;
+foreach my $topdir (sort keys %config) {
+ foreach my $subdir (sort keys %{$config{$topdir}}) {
+ push @list, {
+ topdir => $topdir,
+ subdir => $subdir,
+ order => $config{$topdir}{$subdir}{order},
+ };
+ }
+}
+@list = sort {
+ $a->{order} <=> $b->{order}
+ ||
+ $a->{topdir} cmp $b->{topdir}
+ ||
+ $a->{subdir} cmp $b->{subdir}
+ } @list;
+
# work out what repos to act on
my @repos;
my $nochdir=0;
-foreach my $topdir (sort keys %config) {
- foreach my $subdir (sort keys %{$config{$topdir}}) {
+foreach my $repo (@list) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ next if $no_recurse && $d ne $dir;
+ next if $dir ne $d && $dir !~ /^\Q$d\E/;
+ push @repos, [$dir, $topdir, $subdir];
+}
+if (! @repos) {
+ # fallback to find a leaf repo
+ foreach my $repo (@list) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
next if $subdir eq 'DEFAULT';
my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
- next if $no_recurse && $d ne $dir;
- next if $dir ne $d && $dir !~ /^\Q$d\E/;
- push @repos, [$dir, $topdir, $subdir];
- }
-}
-if (! @repos) {
- # fallback to find a leaf repo
- LEAF: foreach my $topdir (reverse sort keys %config) {
- foreach my $subdir (reverse sort keys %{$config{$topdir}}) {
- next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
- my $d=$directory;
- $dir.="/" unless $dir=~/\/$/;
- $d.="/" unless $d=~/\/$/;
- if ($d=~/^\Q$dir\E/) {
- push @repos, [$dir, $topdir, $subdir];
- last LEAF;
- }
+ if ($d=~/^\Q$dir\E/) {
+ push @repos, [$dir, $topdir, $subdir];
+ last;
}
}
$nochdir=1;
}
-my (@failed, @ok, @skipped);
-foreach my $repo (@repos) {
- action($action, @$repo);
+# run the action on each repository and print stats
+my (@ok, @failed, @skipped);
+if ($jobs > 1) {
+ mrs(@repos);
+}
+else {
+ foreach my $repo (@repos) {
+ record($repo, action($action, @$repo));
+ print "\n";
+ }
+}
+if (! @ok && ! @failed && ! @skipped) {
+ die "mr $action: no repositories found to work on\n";
+}
+print "mr $action: finished (".join("; ",
+ showstat($#ok+1, "ok", "ok"),
+ showstat($#failed+1, "failed", "failed"),
+ showstat($#skipped+1, "skipped", "skipped"),
+).")\n";
+if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+ }
+ if (@failed) {
+ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+}
+if (@failed) {
+ exit 1;
}
+elsif (! @ok && @skipped) {
+ exit 1;
+}
+exit 0;
sub action { #{{{
my ($action, $dir, $topdir, $subdir) = @_;
my $lib=exists $config{$topdir}{$subdir}{lib} ?
$config{$topdir}{$subdir}{lib}."\n" : "";
- if (exists $config{$topdir}{$subdir}{deleted}) {
- my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
- print "mr $action: running deleted test >>$test<<\n" if $verbose;
- my $ret=system($test);
- if ($ret != 0) {
- if (($? & 127) == 2) {
- print STDERR "mr $action: interrupted\n";
- exit 2;
- }
- elsif ($? & 127) {
- print STDERR "mr $action: deleted test received signal ".($? & 127)."\n";
- }
- }
- if ($ret >> 8 == 0) {
- if (-d $dir) {
- print STDERR "mr error: $dir should be deleted yet still exists\n\n";
- push @failed, $dir;
- return;
- }
- else {
- print "mr $action: $dir skipped (as deleted) per config file\n" if $verbose;
- push @skipped, $dir;
- return;
- }
- }
- }
-
if ($action eq 'checkout') {
if (-d $dir) {
print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
- push @skipped, $dir;
- return;
+ return SKIPPED;
}
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
if (! -d $dir) {
print "mr $action: creating parent directory $dir\n" if $verbose;
- my $ret=system("mkdir", "-p", $dir);
+ system("mkdir", "-p", $dir);
}
}
- elsif ($action eq 'update') {
+ elsif ($action =~ /update/) {
if (! -d $dir) {
return action("checkout", $dir, $topdir, $subdir);
}
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
- exit 2;
+ return ABORT;
}
elsif ($? & 127) {
print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
- exit 1;
+ return ABORT;
}
}
if ($ret >> 8 == 0) {
print "mr $action: $dir skipped per config file\n" if $verbose;
- push @skipped, $dir;
- return;
+ return SKIPPED;
}
}
if (! $nochdir && ! chdir($dir)) {
print STDERR "mr $action: failed to chdir to $dir: $!\n";
- push @failed, $dir;
+ return FAILED;
}
elsif (! exists $config{$topdir}{$subdir}{$action}) {
print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
- push @skipped, $dir;
+ return SKIPPED;
}
else {
if (! $nochdir) {
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
- exit 2;
+ return ABORT;
}
elsif ($? & 127) {
print STDERR "mr $action: received signal ".($? & 127)."\n";
+ return ABORT;
}
print STDERR "mr $action: failed ($ret)\n" if $verbose;
- push @failed, $dir;
if ($ret >> 8 != 0) {
print STDERR "mr $action: command failed\n";
}
elsif ($ret != 0) {
print STDERR "mr $action: command died ($ret)\n";
}
+ return FAILED;
}
else {
if ($action eq 'checkout' && ! -d $dir) {
print STDERR "mr $action: $dir missing after checkout\n";;
- push @failed, $dir;
- return;
+ return FAILED;
}
- push @ok, $dir;
+ return OK;
}
+ }
+} #}}}
- print "\n";
+# run actions on multiple repos, in parallel
+sub mrs { #{{{
+ $| = 1;
+ my @active;
+ my @fhs;
+ my @out;
+ my $running=0;
+ while (@fhs or @repos) {
+ while ($running < $jobs && @repos) {
+ $running++;
+ my $repo = shift @repos;
+ pipe(my $outfh, CHILD_STDOUT);
+ pipe(my $errfh, CHILD_STDERR);
+ my $pid;
+ unless ($pid = fork) {
+ die "mr $action: cannot fork: $!" unless defined $pid;
+ open(STDOUT, ">&CHILD_STDOUT") || die "mr $action cannot reopen stdout: $!";
+ open(STDERR, ">&CHILD_STDERR") || die "mr $action cannot reopen stderr: $!";
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ close $outfh;
+ close $errfh;
+ exit action($action, @$repo);
+ }
+ close CHILD_STDOUT;
+ close CHILD_STDERR;
+ push @active, [$pid, $repo];
+ push @fhs, [$outfh, $errfh];
+ push @out, ['', ''];
+ }
+ my ($rin, $rout) = ('','');
+ my $nfound;
+ foreach my $fh (@fhs) {
+ next unless defined $fh;
+ vec($rin, fileno($fh->[0]), 1) = 1 if defined $fh->[0];
+ vec($rin, fileno($fh->[1]), 1) = 1 if defined $fh->[1];
+ }
+ $nfound = select($rout=$rin, undef, undef, 1);
+ foreach my $channel (0, 1) {
+ foreach my $i (0..$#fhs) {
+ next unless defined $fhs[$i];
+ my $fh = $fhs[$i][$channel];
+ next unless defined $fh;
+ if (vec($rout, fileno($fh), 1) == 1) {
+ my $r = '';
+ if (sysread($fh, $r, 1024) == 0) {
+ close($fh);
+ $fhs[$i][$channel] = undef;
+ if (! defined $fhs[$i][0] &&
+ ! defined $fhs[$i][1]) {
+ waitpid($active[$i][0], 0);
+ print STDOUT $out[$i][0];
+ print STDERR $out[$i][1];
+ print "\n";
+ record($active[$i][1], $? >> 8);
+ splice(@fhs, $i, 1);
+ splice(@active, $i, 1);
+ splice(@out, $i, 1);
+ $running--;
+ }
+ }
+ $out[$i][$channel] .= $r;
+ }
+ }
+ }
+ }
+} #}}}
+
+sub record { #{{{
+ my $dir=shift()->[0];
+ my $ret=shift;
+
+ if ($ret == OK) {
+ push @ok, $dir;
+ }
+ elsif ($ret == FAILED) {
+ push @failed, $dir;
+ }
+ elsif ($ret == SKIPPED) {
+ push @skipped, $dir;
+ }
+ elsif ($ret == ABORT) {
+ exit 1;
+ }
+ else {
+ die "unknown exit status $ret";
}
} #}}}
}
return;
} #}}}
-if (! @ok && ! @failed && ! @skipped) {
- die "mr $action: no repositories found to work on\n";
-}
-print "mr $action: finished (".join("; ",
- showstat($#ok+1, "ok", "ok"),
- showstat($#failed+1, "failed", "failed"),
- showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-if ($stats) {
- if (@skipped) {
- print "mr $action: (skipped: ".join(" ", @skipped).")\n";
- }
- if (@failed) {
- print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
- }
-}
-if (@failed) {
- exit 1;
-}
-elsif (! @ok && @skipped) {
- exit 1;
-}
-exit 0;
my %loaded;
sub loadconfig { #{{{
ls = list
[DEFAULT]
+order = 10
lib =
error() {
echo "mr: $@" >&2
exit 1
}
hours_since() {
- for dir in .git .svn .bzr CVS; do
+ if [ -z "$1" ] || [ -z "$2" ]; then
+ error "mr: usage: hours_since action num"
+ fi
+ for dir in .git .svn .bzr CVS .hg; do
if [ -e "$MR_REPO/$dir" ]; then
flagfile="$MR_REPO/$dir/.mr_last$1"
break
if [ -z "$flagfile" ]; then
error "cannot determine flag filename"
fi
- perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"
- touch "$flagfile"
+ delta=$(perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile")
+ if [ "$delta" -lt "$2" ]; then
+ exit 0
+ else
+ touch "$flagfile"
+ exit 1
+ fi
}
update =
if [ -d "$MR_REPO"/.svn ]; then
svn update "$@"
elif [ -d "$MR_REPO"/.git ]; then
- git pull origin master "$@"
+ if [ -z "$@" ]; then
+ git pull -t origin master
+ else
+ git pull "$@"
+ fi
elif [ -d "$MR_REPO"/.bzr ]; then
bzr merge "$@"
elif [ -d "$MR_REPO"/CVS ]; then
cvs update "$@"
+ elif [ -d "$MR_REPO"/.hg ]; then
+ hg pull "$@" && hg update "$@"
else
error "unknown repo type"
fi
bzr status "$@"
elif [ -d "$MR_REPO"/CVS ]; then
cvs status "$@"
+ elif [ -d "$MR_REPO"/.hg ]; then
+ hg status "$@"
else
error "unknown repo type"
fi
bzr commit "$@" && bzr push
elif [ -d "$MR_REPO"/CVS ]; then
cvs commit "$@"
+ elif [ -d "$MR_REPO"/.hg ]; then
+ hg commit -m "$@" && hg push
else
error "unknown repo type"
fi
bzr diff "$@"
elif [ -d "$MR_REPO"/CVS ]; then
cvs diff "$@"
+ elif [ -d "$MR_REPO"/.hg ]; then
+ hg diff "$@"
else
error "unknown repo type"
fi
bzr log "$@"
elif [ -d "$MR_REPO"/CVS ]; then
cvs log "$@"
+ elif [ -d "$MR_REPO"/.hg ]; then
+ hg log "$@"
else
error "unknown repo type"
fi
echo "Registering cvs repository $repo at root $root"
mr -c "$MR_CONFIG" config "$(pwd)" \
checkout="cvs -d '$root' co -d $basedir $repo"
+ elif [ -d .hg ]; then
+ url=$(hg showconfig paths.default)
+ echo "Registering mercurial repo url: $url in $MR_CONFIG"
+ mr -c "$MR_CONFIG" config "$(pwd)" \
+ checkout="hg clone $url $basedir"
else
error "unable to register this repo type"
fi
projects / code / myrepos.git / blobdiff