B<mr> [options] commit [-m "message"]
+B<mr> [options] record [-m "message"]
+
B<mr> [options] diff
B<mr> [options] log
B<mr> [options] action [params ...]
+B<mr> [options] [online|offline]
+
+B<mr> [options] remember action [params ...]
+
=head1 DESCRIPTION
B<mr> is a Multiple Repository management tool. It can checkout, update, or
perform other actions on a set of repositories as if they were one combined
-respository. It supports any combination of subversion, git, cvs, mecurial,
+repository. It supports any combination of subversion, git, cvs, mecurial,
bzr and darcs repositories, and support for other revision control systems can
easily be added.
=item commit (or ci)
Commits changes to each repository. (By default, changes are pushed to the
-remote repository too, when using distributed systems like git.)
+remote repository too, when using distributed systems like git. If you
+don't like this default, you can change it in your .mrconfig, or use record
+instead.)
The optional -m parameter allows specifying a commit message.
+=item record
+
+Records changes to the local repository, but does not push them to the
+remote repository. Only supported for distributed revision control systems.
+
+The optional -m parameter allows specifying a commit message.
+
+=item push
+
+Pushes committed local changes to the remote repository. A no-op for
+centralized revision control systems.
+
=item diff
Show a diff of uncommitted changes.
The ~/.mrconfig file is used by default. To use a different config file,
use the -c option.
+=item offline
+
+Advises mr that it is in offline mode. Any commands that fail in
+offline mode will be remembered, and retried when mr is told it's online.
+
+=item online
+
+Advices mr that it is in online mode again. Commands that failed while in
+offline mode will be re-run.
+
+=item remember
+
+Remember a command, to be run later when mr re-enters online mode. This
+implicitly puts mr into offline mode. The command can be any regular mr
+command. This is useful when you know that a command will fail due to being
+offline, and so don't want to run it right now at all, but just remember
+to run it when you go back online.
+
=item help
Displays this help.
=back
-Actions can be abbreviated to any unambiguous subsctring, so
-"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr
+Actions can be abbreviated to any unambiguous substring, so
+"mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr
update"
Additional parameters can be passed to most commands, and are passed on
Be verbose.
+=item -q
+
+Be quiet.
+
=item -s
Expand the statistics line displayed at the end to include information
about exactly which repositories failed and were skipped, if any.
-=item -n
+=item -i
+
+Interactive mode. If a repository fails to be processed, a subshell will be
+started which you can use to resolve or investigate the problem. Exit the
+subshell to continue the mr run.
+
+=item -n [number]
+
+If no number if specified, just operate on the repository for the current
+directory, do not recurse into deeper repositories.
+
+If a number is specified, will recurse into repositories at most that many
+subdirectories deep. For example, with -n 2 it would recurse into ./src/foo,
+but not ./src/packages/bar.
-Just operate on the repository for the current directory, do not
-recurse into deeper repositories.
+=item -j [number]
-=item -j number
+Run the specified number of jobs in parallel, or an unlimited number of jobs
+with no number specified. This can greatly speed up operations such as updates.
+It is not recommended for interactive operations.
-Run the specified number of jobs in parallel. This can greatly speed up
-operations such as updates. It is not recommended for interactive
-operations.
+Note that running more than 10 jobs at a time is likely to run afoul of
+ssh connection limits. Running between 3 and 5 jobs at a time will yeild
+a good speedup in updates without loading the machine too much.
=back
=head1 FILES
+The ~/.mrlog file contains commands that mr has remembered to run later,
+due to being offline. You can delete or edit this file to remove commands,
+or even to add other commands for 'mr online' to run. If the file is
+present, mr assumes it is in offline mode.
+
B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
file in your home directory, and this can in turn chain load .mrconfig files
from repositories.
All other sections add repositories. The section header specifies the
directory where the repository is located. This is relative to the directory
that contains the mrconfig file, but you can also choose to use absolute
-paths.
+paths. (Note that you can use environment variables in section names; they
+will be passed through the shell for expansion. For example,
+"[$HOSTNAME]", or "[${HOSTNAME}foo]")
Within a section, each parameter defines a shell command to run to handle a
given action. mr contains default handlers for "update", "status",
(included in mr's built-in library) to skip updating the repo unless it's
been at least 12 hours since the last update.
- skip = test $(whoami) != joey
+ skip = test `whoami` != joey
skip = [ "$1" = update ] && ! hours_since "$1" 12
=item order
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
=item lib
The "lib" parameter can specify some shell code that will be run before each
use strict;
use Getopt::Long;
use Cwd qw(getcwd abs_path);
-use POSIX "WNOHANG";
+
+# things that can happen when mr runs a command
use constant {
OK => 0,
FAILED => 1,
ABORT => 3,
};
-$SIG{INT}=sub {
- print STDERR "mr: interrupted\n";
- exit 2;
-};
-
-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+# configurables
my $config_overridden=0;
my $verbose=0;
+my $quiet=0;
my $stats=0;
-my $no_recurse=0;
+my $interactive=0;
+my $max_depth;
+my $no_chdir=0;
my $jobs=1;
+my $directory=getcwd();
+$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+# globals :-(
my %config;
my %configfiles;
my %knownactions;
my %alias;
-my $directory=getcwd();
-
-Getopt::Long::Configure("no_permute");
-my $result=GetOptions(
- "d|directory=s" => sub { $directory=abs_path($_[1]) },
- "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
- "v|verbose" => \$verbose,
- "s|stats" => \$stats,
- "n|no-recurse" => \$no_recurse,
- "j|jobs=i" => \$jobs,
-);
-if (! $result || @ARGV < 1) {
- die("Usage: mr [-d directory] action [params ...]\n".
- "(Use mr help for man page.)\n");
-
-}
-if (! defined $directory) {
- die("mr: failed to determine working directory\n");
-}
-
-# Make sure MR_CONFIG is an absolute path, but don't use abs_path since
-# the config file might be a symlink to elsewhere, and the directory it's
-# in is significant.
-if ($ENV{MR_CONFIG} !~ /^\//) {
- $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
-}
-# Try to set MR_PATH to the path to the program.
-eval {
- use FindBin qw($Bin $Script);
- $ENV{MR_PATH}=$Bin."/".$Script;
-};
-
-loadconfig(\*DATA);
-loadconfig($ENV{MR_CONFIG});
-#use Data::Dumper;
-#print Dumper(\%config);
-
-# alias expansion and command stemming
-my $action=shift @ARGV;
-if (exists $alias{$action}) {
- $action=$alias{$action};
-}
-if (! exists $knownactions{$action}) {
- my @matches = grep { /^\Q$action\E/ }
- keys %knownactions, keys %alias;
- if (@matches == 1) {
- $action=$matches[0];
- }
- elsif (@matches == 0) {
- die "mr: unknown action \"$action\" (known actions: ".
- join(", ", sort keys %knownactions).")\n";
- }
- else {
- die "mr: ambiguous action \"$action\" (matches: ".
- join(", ", @matches).")\n";
- }
-}
-
-# commands that do not operate on all repos
-if ($action eq 'help') {
- exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
-}
-elsif ($action eq 'config') {
- if (@ARGV < 2) {
- die "mr config: not enough parameters\n";
- }
- my $section=shift;
- if ($section=~/^\//) {
- # try to convert to a path relative to the config file
- my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
- $dir=abs_path($dir);
- $dir.="/" unless $dir=~/\/$/;
- if ($section=~/^\Q$dir\E(.*)/) {
- $section=$1;
- }
- }
- my %changefields;
- foreach (@ARGV) {
- if (/^([^=]+)=(.*)$/) {
- $changefields{$1}=$2;
- }
- else {
- my $found=0;
- foreach my $topdir (sort keys %config) {
- if (exists $config{$topdir}{$section} &&
- exists $config{$topdir}{$section}{$_}) {
- print $config{$topdir}{$section}{$_}."\n";
- $found=1;
- last if $section eq 'DEFAULT';
- }
- }
- if (! $found) {
- die "mr $action: $section $_ not set\n";
- }
- }
- }
- modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
- exit 0;
-}
-elsif ($action eq 'register') {
- if (! $config_overridden) {
- # Find the closest known mrconfig file to the current
- # directory.
- $directory.="/" unless $directory=~/\/$/;
- foreach my $topdir (reverse sort keys %config) {
- next unless length $topdir;
- if ($directory=~/^\Q$topdir\E/) {
- $ENV{MR_CONFIG}=$configfiles{$topdir};
- last;
- }
- }
- }
- if (@ARGV) {
- my $subdir=shift @ARGV;
- if (! chdir($subdir)) {
- print STDERR "mr $action: failed to chdir to $subdir: $!\n";
- }
- }
-
- $ENV{MR_REPO}=getcwd();
- my $command=findcommand("register", '', '', 'DEFAULT');
- if (! defined $command) {
- die "mr $action: unknown repository type\n";
- }
-
- $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
- $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
- "my_action(){ $command\n }; my_action ".
- join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print STDERR "mr $action: running >>$command<<\n" if $verbose;
- exec($command) || die "exec: $!";
-}
-
-# an ordered list of repos
-my @list;
-foreach my $topdir (sort keys %config) {
- foreach my $subdir (sort keys %{$config{$topdir}}) {
- push @list, {
- topdir => $topdir,
- subdir => $subdir,
- order => $config{$topdir}{$subdir}{order},
- };
- }
-}
-@list = sort {
- $a->{order} <=> $b->{order}
- ||
- $a->{topdir} cmp $b->{topdir}
- ||
- $a->{subdir} cmp $b->{subdir}
- } @list;
-
-# work out what repos to act on
-my @repos;
-my $nochdir=0;
-foreach my $repo (@list) {
- my $topdir=$repo->{topdir};
- my $subdir=$repo->{subdir};
-
- next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
- my $d=$directory;
- $dir.="/" unless $dir=~/\/$/;
- $d.="/" unless $d=~/\/$/;
- next if $no_recurse && $d ne $dir;
- next if $dir ne $d && $dir !~ /^\Q$d\E/;
- push @repos, [$dir, $topdir, $subdir];
-}
-if (! @repos) {
- # fallback to find a leaf repo
- foreach my $repo (reverse @list) {
- my $topdir=$repo->{topdir};
- my $subdir=$repo->{subdir};
-
- next if $subdir eq 'DEFAULT';
- my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
- my $d=$directory;
- $dir.="/" unless $dir=~/\/$/;
- $d.="/" unless $d=~/\/$/;
- if ($d=~/^\Q$dir\E/) {
- push @repos, [$dir, $topdir, $subdir];
- last;
- }
- }
- $nochdir=1;
-}
-
-# run the action on each repository and print stats
my (@ok, @failed, @skipped);
-if ($jobs > 1) {
- mrs(@repos);
-}
-else {
- foreach my $repo (@repos) {
- record($repo, action($action, @$repo));
- }
-}
-if (! @ok && ! @failed && ! @skipped) {
- die "mr $action: no repositories found to work on\n";
-}
-print "mr $action: finished (".join("; ",
- showstat($#ok+1, "ok", "ok"),
- showstat($#failed+1, "failed", "failed"),
- showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-if ($stats) {
- if (@skipped) {
- print "mr $action: (skipped: ".join(" ", @skipped).")\n";
- }
- if (@failed) {
- print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
- }
-}
-if (@failed) {
- exit 1;
-}
-elsif (! @ok && @skipped) {
- exit 1;
-}
-exit 0;
+main();
+
+my %rcs;
sub rcs_test { #{{{
my ($action, $dir, $topdir, $subdir) = @_;
+ if (exists $rcs{$dir}) {
+ return $rcs{$dir};
+ }
+
my $test="set -e\n";
foreach my $rcs_test (
sort {
length $a <=> length $b
||
$a cmp $b
- } grep { /_test/ } keys %{$config{$topdir}{$subdir}}) {
+ } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
my ($rcs)=$rcs_test=~/(.*)_test/;
$test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
$test.="if my_$rcs_test; then echo $rcs; fi\n";
print "mr $action: running rcs test >>$test<<\n" if $verbose;
my $rcs=`$test`;
chomp $rcs;
- if (! length $rcs) {
+ if ($rcs=~/\n/s) {
+ $rcs=~s/\n/, /g;
+ print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n";
return undef;
}
+ if (! length $rcs) {
+ return $rcs{$dir}=undef;
+ }
else {
- return $rcs;
+ return $rcs{$dir}=$rcs;
}
} #}}}
sub findcommand { #{{{
- my ($action, $dir, $topdir, $subdir) = @_;
+ my ($action, $dir, $topdir, $subdir, $is_checkout) = @_;
+
+ if (exists $config{$topdir}{$subdir}{$action}) {
+ return $config{$topdir}{$subdir}{$action};
+ }
+
+ if ($is_checkout) {
+ return undef;
+ }
my $rcs=rcs_test(@_);
exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
return $config{$topdir}{$subdir}{$rcs."_".$action};
}
- elsif (exists $config{$topdir}{$subdir}{$action}) {
- return $config{$topdir}{$subdir}{$action};
- }
else {
return undef;
}
sub action { #{{{
my ($action, $dir, $topdir, $subdir) = @_;
-
+
$ENV{MR_CONFIG}=$configfiles{$topdir};
my $lib=exists $config{$topdir}{$subdir}{lib} ?
$config{$topdir}{$subdir}{lib}."\n" : "";
+ my $is_checkout=($action eq 'checkout');
- if ($action eq 'checkout') {
+ $ENV{MR_REPO}=$dir;
+
+ if ($is_checkout) {
if (-d $dir) {
print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
return SKIPPED;
}
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
-
- if (! -d $dir) {
- print "mr $action: creating parent directory $dir\n" if $verbose;
- system("mkdir", "-p", $dir);
- }
}
elsif ($action =~ /update/) {
if (! -d $dir) {
}
}
- $ENV{MR_REPO}=$dir;
-
- my $skiptest=findcommand("skip", $dir, $topdir, $subdir);
- my $command=findcommand($action, $dir, $topdir, $subdir);
+ my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);
+ my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
if (defined $skiptest) {
my $test="set -e;".$lib.
return SKIPPED;
}
}
-
- if (! $nochdir && ! chdir($dir)) {
+
+ if ($is_checkout && ! -d $dir) {
+ print "mr $action: creating parent directory $dir\n" if $verbose;
+ system("mkdir", "-p", $dir);
+ }
+
+ if (! $no_chdir && ! chdir($dir)) {
print STDERR "mr $action: failed to chdir to $dir: $!\n";
return FAILED;
}
return FAILED;
}
else {
- print STDERR "mr $action: no defined $action command for $rcs repository $topdir$subdir, skipping\n";
+ print STDERR "mr $action: no defined action for $rcs repository $topdir$subdir, skipping\n";
return SKIPPED;
}
}
else {
- if (! $nochdir) {
- print "mr $action: $topdir$subdir\n";
+ if (! $no_chdir) {
+ print "mr $action: $topdir$subdir\n" unless $quiet;
}
else {
my $s=$directory;
$s=~s/^\Q$topdir$subdir\E\/?//;
- print "mr $action: $topdir$subdir (in subdir $s)\n";
+ print "mr $action: $topdir$subdir (in subdir $s)\n" unless $quiet;
}
$command="set -e; ".$lib.
"my_action(){ $command\n }; my_action ".
join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
- print STDERR "mr $action: running >>$command<<\n" if $verbose;
+ print "mr $action: running >>$command<<\n" if $verbose;
my $ret=system($command);
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: failed ($ret)\n" if $verbose;
if ($ret >> 8 != 0) {
print STDERR "mr $action: command failed\n";
+ if (-e "$ENV{HOME}/.mrlog" && $action ne 'remember') {
+ # recreate original command line to
+ # remember, and avoid recursing
+ my @orig=@ARGV;
+ @ARGV=('-n', $action, @orig);
+ action("remember", $dir, $topdir, $subdir);
+ @ARGV=@orig;
+ }
}
elsif ($ret != 0) {
print STDERR "mr $action: command died ($ret)\n";
# run actions on multiple repos, in parallel
sub mrs { #{{{
+ my $action=shift;
+ my @repos=@_;
+
$| = 1;
my @active;
my @fhs;
my @out;
my $running=0;
while (@fhs or @repos) {
- while ($running < $jobs && @repos) {
+ while ((!$jobs || $running < $jobs) && @repos) {
$running++;
my $repo = shift @repos;
pipe(my $outfh, CHILD_STDOUT);
print "\n";
}
elsif ($ret == FAILED) {
+ if ($interactive) {
+ chdir($dir) unless $no_chdir;
+ print STDERR "mr: Starting interactive shell. Exit shell to continue.\n";
+ system((getpwuid($<))[8]);
+ }
push @failed, $dir;
print "\n";
}
}
} #}}}
+sub showstats { #{{{
+ my $action=shift;
+ if (! @ok && ! @failed && ! @skipped) {
+ die "mr $action: no repositories found to work on\n";
+ }
+ print "mr $action: finished (".join("; ",
+ showstat($#ok+1, "ok", "ok"),
+ showstat($#failed+1, "failed", "failed"),
+ showstat($#skipped+1, "skipped", "skipped"),
+ ).")\n" unless $quiet;
+ if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n" unless $quiet;
+ }
+ if (@failed) {
+ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+ }
+} #}}}
+
sub showstat { #{{{
my $count=shift;
my $singular=shift;
return;
} #}}}
+# an ordered list of repos
+sub repolist { #{{{
+ my @list;
+ foreach my $topdir (sort keys %config) {
+ foreach my $subdir (sort keys %{$config{$topdir}}) {
+ push @list, {
+ topdir => $topdir,
+ subdir => $subdir,
+ order => $config{$topdir}{$subdir}{order},
+ };
+ }
+ }
+ return sort {
+ $a->{order} <=> $b->{order}
+ ||
+ $a->{topdir} cmp $b->{topdir}
+ ||
+ $a->{subdir} cmp $b->{subdir}
+ } @list;
+} #}}}
+
+# figure out which repos to act on
+sub selectrepos { #{{{
+ my @repos;
+ foreach my $repo (repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ next if $dir ne $d && $dir !~ /^\Q$d\E/;
+ if (defined $max_depth) {
+ my @a=split('/', $dir);
+ my @b=split('/', $d);
+ do { } while (@a && @b && shift(@a) eq shift(@b));
+ next if @a > $max_depth || @b > $max_depth;
+ }
+ push @repos, [$dir, $topdir, $subdir];
+ }
+ if (! @repos) {
+ # fallback to find a leaf repo
+ foreach my $repo (reverse repolist()) {
+ my $topdir=$repo->{topdir};
+ my $subdir=$repo->{subdir};
+
+ next if $subdir eq 'DEFAULT';
+ my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+ my $d=$directory;
+ $dir.="/" unless $dir=~/\/$/;
+ $d.="/" unless $d=~/\/$/;
+ if ($d=~/^\Q$dir\E/) {
+ push @repos, [$dir, $topdir, $subdir];
+ last;
+ }
+ }
+ $no_chdir=1;
+ }
+ return @repos;
+} #}}}
+
+sub expandenv { #{{{
+ my $val=shift;
+
+
+ if ($val=~/\$/) {
+ $val=`echo "$val"`;
+ chomp $val;
+ }
+
+ return $val;
+} #}}}
+
my %loaded;
sub loadconfig { #{{{
my $f=shift;
chomp;
next if /^\s*\#/ || /^\s*$/;
if (/^\[([^\]]*)\]\s*$/) {
- $section=$1;
+ $section=expandenv($1);
}
elsif (/^(\w+)\s*=\s*(.*)/) {
my $parameter=$1;
chomp $value;
}
+ if ($parameter eq "include") {
+ print "mr: including output of \"$value\"\n" if $verbose;
+ unshift @lines, `$value`;
+ if ($?) {
+ print STDERR "mr: include command exited nonzero ($?)\n";
+ }
+ next;
+ }
+
if (! defined $section) {
die "$f line $.: parameter ($parameter) not in section\n";
}
my $ret=system($value);
if ($ret != 0) {
if (($? & 127) == 2) {
- print STDERR "mr $action: chain test interrupted\n";
+ print STDERR "mr: chain test interrupted\n";
exit 2;
}
elsif ($? & 127) {
- print STDERR "mr $action: chain test received signal ".($? & 127)."\n";
+ print STDERR "mr: chain test received signal ".($? & 127)."\n";
}
}
else {
$addfields->();
}
- $section=$1;
+ $section=expandenv($1);
push @out, $_;
}
close $out;
} #}}}
+sub dispatch { #{{{
+ my $action=shift;
+
+ # actions that do not operate on all repos
+ if ($action eq 'help') {
+ help(@ARGV);
+ }
+ elsif ($action eq 'config') {
+ config(@ARGV);
+ }
+ elsif ($action eq 'register') {
+ register(@ARGV);
+ }
+ elsif ($action eq 'remember' ||
+ $action eq 'offline' ||
+ $action eq 'online') {
+ my @repos=selectrepos;
+ action($action, @{$repos[0]}) if @repos;
+ exit 0;
+ }
+
+ if (!$jobs || $jobs > 1) {
+ mrs($action, selectrepos());
+ }
+ else {
+ foreach my $repo (selectrepos()) {
+ record($repo, action($action, @$repo));
+ }
+ }
+} #}}}
+
+sub help { #{{{
+ exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+} #}}}
+
+sub config { #{{{
+ if (@_ < 2) {
+ die "mr config: not enough parameters\n";
+ }
+ my $section=shift;
+ if ($section=~/^\//) {
+ # try to convert to a path relative to the config file
+ my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
+ $dir=abs_path($dir);
+ $dir.="/" unless $dir=~/\/$/;
+ if ($section=~/^\Q$dir\E(.*)/) {
+ $section=$1;
+ }
+ }
+ my %changefields;
+ foreach (@_) {
+ if (/^([^=]+)=(.*)$/) {
+ $changefields{$1}=$2;
+ }
+ else {
+ my $found=0;
+ foreach my $topdir (sort keys %config) {
+ if (exists $config{$topdir}{$section} &&
+ exists $config{$topdir}{$section}{$_}) {
+ print $config{$topdir}{$section}{$_}."\n";
+ $found=1;
+ last if $section eq 'DEFAULT';
+ }
+ }
+ if (! $found) {
+ die "mr config: $section $_ not set\n";
+ }
+ }
+ }
+ modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
+ exit 0;
+} #}}}
+
+sub register { #{{{
+ if ($config_overridden) {
+ # Find the directory that the specified config file is
+ # located in.
+ ($directory)=abs_path($ENV{MR_CONFIG})=~/^(.*\/)[^\/]+$/;
+ }
+ else {
+ # Find the closest known mrconfig file to the current
+ # directory.
+ $directory.="/" unless $directory=~/\/$/;
+ my $foundconfig=0;
+ foreach my $topdir (reverse sort keys %config) {
+ next unless length $topdir;
+ if ($directory=~/^\Q$topdir\E/) {
+ $ENV{MR_CONFIG}=$configfiles{$topdir};
+ $directory=$topdir;
+ $foundconfig=1;
+ last;
+ }
+ }
+ if (! $foundconfig) {
+ $directory=""; # no config file, use builtin
+ }
+ }
+ if (@ARGV) {
+ my $subdir=shift @ARGV;
+ if (! chdir($subdir)) {
+ print STDERR "mr register: failed to chdir to $subdir: $!\n";
+ }
+ }
+
+ $ENV{MR_REPO}=getcwd();
+ my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT', 0);
+ if (! defined $command) {
+ die "mr register: unknown repository type\n";
+ }
+
+ $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+ $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+ "my_action(){ $command\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print "mr register: running >>$command<<\n" if $verbose;
+ exec($command) || die "exec: $!";
+} #}}}
+
+# alias expansion and command stemming
+sub expandaction { #{{{
+ my $action=shift;
+ if (exists $alias{$action}) {
+ $action=$alias{$action};
+ }
+ if (! exists $knownactions{$action}) {
+ my @matches = grep { /^\Q$action\E/ }
+ keys %knownactions, keys %alias;
+ if (@matches == 1) {
+ $action=$matches[0];
+ }
+ elsif (@matches == 0) {
+ die "mr: unknown action \"$action\" (known actions: ".
+ join(", ", sort keys %knownactions).")\n";
+ }
+ else {
+ die "mr: ambiguous action \"$action\" (matches: ".
+ join(", ", @matches).")\n";
+ }
+ }
+ return $action;
+} #}}}
+
+sub getopts { #{{{
+ my @saved=@ARGV;
+ Getopt::Long::Configure("bundling", "no_permute");
+ my $result=GetOptions(
+ "d|directory=s" => sub { $directory=abs_path($_[1]) },
+ "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
+ "v|verbose" => \$verbose,
+ "q|quiet" => \$quiet,
+ "s|stats" => \$stats,
+ "i|interactive" => \$interactive,
+ "n|no-recurse:i" => \$max_depth,
+ "j|jobs:i" => \$jobs,
+ );
+ if (! $result || @ARGV < 1) {
+ die("Usage: mr [-d directory] action [params ...]\n".
+ "(Use mr help for man page.)\n");
+ }
+
+ $ENV{MR_SWITCHES}="";
+ foreach my $option (@saved) {
+ last if $option eq $ARGV[0];
+ $ENV{MR_SWITCHES}.="$option ";
+ }
+} #}}}
+
+sub init { #{{{
+ $SIG{INT}=sub {
+ print STDERR "mr: interrupted\n";
+ exit 2;
+ };
+
+ # This can happen if it's run in a directory that was removed
+ # or other strangeness.
+ if (! defined $directory) {
+ die("mr: failed to determine working directory\n");
+ }
+ # Make sure MR_CONFIG is an absolute path, but don't use abs_path since
+ # the config file might be a symlink to elsewhere, and the directory it's
+ # in is significant.
+ if ($ENV{MR_CONFIG} !~ /^\//) {
+ $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
+ }
+ # Try to set MR_PATH to the path to the program.
+ eval {
+ use FindBin qw($Bin $Script);
+ $ENV{MR_PATH}=$Bin."/".$Script;
+ };
+} #}}}
+
+sub main { #{{{
+ getopts();
+ init();
+
+ loadconfig(\*DATA);
+ loadconfig($ENV{MR_CONFIG});
+ #use Data::Dumper; print Dumper(\%config);
+
+ my $action=expandaction(shift @ARGV);
+ dispatch($action);
+ showstats($action);
+
+ if (@failed) {
+ exit 1;
+ }
+ elsif (! @ok && @skipped) {
+ exit 1;
+ }
+ else {
+ exit 0;
+ }
+} #}}}
+
# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
#DATA{{{
if [ -z "$flagfile" ]; then
error "cannot determine flag filename"
fi
- delta=$(perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile")
+ delta=`perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"`
if [ "$delta" -lt "$2" ]; then
exit 0
else
git_bare_test =
test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
- test "$(GIT_CONFIG="$MR_REPO"/config git-config --get core.bare)" = true
-git_fake_bare_test =
- test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
- test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
- test "$(GIT_CONFIG="$MR_REPO"/config git-config --get core.bare)" = false
+ test "`GIT_CONFIG="$MR_REPO"/config git config --get core.bare`" = true
svn_update = svn update "$@"
-git_update = if [ "$@" ]; then git pull "$@"; else git pull -t origin master; fi
+git_update = git pull "$@"
bzr_update = bzr merge "$@"
cvs_update = cvs update "$@"
hg_update = hg pull "$@" && hg update "$@"
darcs_update = darcs pull -a "$@"
-git_fake_bare_update =
- # all this is because of a bug in git-fetch, which requires GIT_DIR set
- local git_dir_override; git_dir_override=.git
- case "$(get_git_repo_type "$MR_REPO")" in
- fake-bare) git_dir_override="$MR_REPO";;
- esac
- args="$@"
- [ -z "$args" ] && args="-t origin master"
- eval GIT_DIR="$git_dir_override" git pull "$args"
svn_status = svn status "$@"
git_status = git status "$@" || true
bzr_status = bzr status "$@"
cvs_status = cvs status "$@"
hg_status = hg status "$@"
-darcs_status = darcs whatsnew -ls "$@"
-git_fake_bare_status = git status "$@" || true
+darcs_status = darcs whatsnew -ls "$@" || true
svn_commit = svn commit "$@"
git_commit = git commit -a "$@" && git push --all
bzr_commit = bzr commit "$@" && bzr push
cvs_commit = cvs commit "$@"
hg_commit = hg commit -m "$@" && hg push
-darcs_commit = darcs commit -a -m "$@" && darcs push -a
-git_fake_bare_commit = error "commit does not work for fake bare git repositories (yet)."
+darcs_commit = darcs record -a -m "$@" && darcs push -a
+
+git_record = git commit -a "$@"
+bzr_record = bzr commit "$@"
+hg_record = hg commit -m "$@"
+darcs_record = darcs record -a -m "$@"
+
+svn_push = :
+git_push = git push "$@"
+bzr_push = bzr push "$@"
+cvs_push = :
+hg_push = hg push "$@"
+darcs_push = darcs push -a
svn_diff = svn diff "$@"
git_diff = git diff "$@"
bzr_diff = bzr diff "$@"
cvs_diff = cvs diff "$@"
hg_diff = hg diff "$@"
-darcs_diff = darcs diff "$@"
-git_fake_bare_diff = error "diff does not work for fake bare git repositories (yet)."
+darcs_diff = darcs diff -u "$@"
svn_log = svn log "$@"
git_log = git log "$@"
hg_log = hg log "$@"
darcs_log = darcs changes "$@"
git_bare_log = git log "$@"
-git_fake_bare_log = git log "$@"
svn_register =
- url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
+ url=`LC_ALL=C svn info . | grep -i '^URL:' | cut -d ' ' -f 2`
if [ -z "$url" ]; then
error "cannot determine svn url"
fi
echo "Registering svn url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
git_register =
- url="$(LANG=C git-config --get remote.origin.url)" || true
+ url="`LC_ALL=C git config --get remote.origin.url`" || true
if [ -z "$url" ]; then
error "cannot determine git url"
fi
echo "Registering git url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
bzr_register =
- url=$(cat .bzr/branch/parent)
+ url="`LC_ALL=C bzr info . | egrep -i 'checkout of branch|parent branch' | awk '{print $NF}'`"
if [ -z "$url" ]; then
error "cannot determine bzr url"
fi
echo "Registering bzr url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
cvs_register =
- repo=$(cat CVS/Repository)
- root=$(cat CVS/Root)
+ repo=`cat CVS/Repository`
+ root=`cat CVS/Root`
if [ -z "$root" ]; then
error "cannot determine cvs root"
fi
echo "Registering cvs repository $repo at root $root"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d $MR_REPO $repo"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
hg_register =
- url=$(hg showconfig paths.default)
+ url=`hg showconfig paths.default`
echo "Registering mercurial repo url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
darcs_register =
- url=$(cat _darcs/prefs/defaultrepo)
+ url=`cat _darcs/prefs/defaultrepo`
echo "Registering darcs repository $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url' '$MR_REPO'"
git_bare_register =
- url="$(LANG=C GIT_CONFIG=config git-config --get remote.origin.url)" || true
+ url="`LC_ALL=C GIT_CONFIG=config git config --get remote.origin.url`" || true
if [ -z "$url" ]; then
error "cannot determine git url"
fi
- mr -c "$MR_CONFIG" config "`pwd`" \
- lib="GIT_WORK_TREE=$work_tree; export GIT_WORK_TREE"
echo "Registering git url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone $url $MR_REPO"
-git_fake_bare_register =
- url="$(LANG=C GIT_CONFIG=config git-config --get remote.origin.url)" || true
- if [ -z "$url" ]; then
- error "cannot determine git url"
- fi
- worktree="$(git-config --get core.worktree)" || true
- if [ ! -d "$worktree" ]; then
- error "git worktree $worktree does not exist"
- fi
- mr -c "$MR_CONFIG" config "`pwd`" \
- lib="GIT_WORK_TREE=$work_tree; export GIT_WORK_TREE"
- echo "Registering git url: $url in $MR_CONFIG (with worktree $worktree)"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone $url $MR_REPO"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
help =
if [ ! -e "$MR_PATH" ]; then
error "cannot find program path"
fi
- (pod2man -c mr "$MR_PATH" | man -l -) || error "pod2man or man failed"
+ tmp=$(mktemp -t mr.XXXXXXXXXX) || error "mktemp failed"
+ trap "rm -f $tmp" exit
+ pod2man -c mr "$MR_PATH" > "$tmp" || error "pod2man failed"
+ man -l "$tmp" || error "man failed"
list = true
config =
+online =
+ if [ -s ~/.mrlog ]; then
+ info "running offline commands"
+ mv -f ~/.mrlog ~/.mrlog.old
+ if ! sh -e ~/.mrlog.old; then
+ error "offline command failed; left in ~/.mrlog.old"
+ fi
+ rm -f ~/.mrlog.old
+ else
+ info "no offline commands to run"
+ fi
+offline =
+ touch ~/.mrlog
+ info "offline mode enabled"
+remember =
+ info "remembering command: 'mr $@'"
+ command="mr -d '$(pwd)' $MR_SWITCHES"
+ for w in "$@"; do
+ command="$command '$w'"
+ done
+ if [ ! -e ~/.mrlog ] || ! grep -q -F "$command" ~/.mrlog; then
+ echo "$command" >> ~/.mrlog
+ fi
+
ed = echo "A horse is a horse, of course, of course.."
T = echo "I pity the fool."
right = echo "Not found."
projects / code / myrepos.git / blobdiff