improve wording

[code/myrepos.git] / mr

diff --git a/mr b/mr
index 9a33d40b3c2f9949df9c2a4e2ba46b4de2b2609f..89f3281f1137cda05469f33afd05b7df82008a39 100755 (executable)
--- a/mr
+++ b/mr
@@ -160,10 +160,8 @@ recurse into deeper repositories.
 =item -j number
 
 Run the specified number of jobs in parallel. This can greatly speed up
-operations such as updates.
-
-Note that in -j mode, all output of the jobs goes to standard output, even
-output that would normally go to standard error.
+operations such as updates. It is not recommended for interactive
+operations.
 
 =back
 
@@ -231,7 +229,7 @@ mr is run by joey. The second uses the hours_since function
 been at least 12 hours since the last update.
 
   skip = test $(whoami) != joey
-  skip = [ "$1" = update ] && [ $(hours_since "$1") -lt 12 ]
+  skip = [ "$1" = update ] && ! hours_since "$1" 12
 
 =item chain
 
@@ -443,6 +441,7 @@ if ($jobs > 1) {
 else {
        foreach my $repo (@repos) {
                record($repo, action($action, @$repo));
+               print "\n";
        }
 }
 if (! @ok && ! @failed && ! @skipped) {
@@ -489,7 +488,7 @@ sub action { #{{{
                        system("mkdir", "-p", $dir);
                }
        }
-       elsif ($action eq 'update') {
+       elsif ($action =~ /update/) {
                if (! -d $dir) {
                        return action("checkout", $dir, $topdir, $subdir);
                }
@@ -538,7 +537,6 @@ sub action { #{{{
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
                print STDERR "mr $action: running >>$command<<\n" if $verbose;
                my $ret=system($command);
-               print "\n";
                if ($ret != 0) {
                        if (($? & 127) == 2) {
                                print STDERR "mr $action: interrupted\n";
@@ -569,63 +567,73 @@ sub action { #{{{
 } #}}}
 
 # run actions on multiple repos, in parallel
-my %jobs;
 sub mrs { #{{{
        $| = 1;
+       my @active;
        my @fhs;
        my @out;
        my $running=0;
        while (@fhs or @repos) {
                while ($running < $jobs && @repos) {
-                       $SIG{CHLD}='DEFAULT';
                        $running++;
                        my $repo = shift @repos;
-                       my $pid = open(my $fh, "-|");
-                       if (! $pid) {
-                               open(STDERR, ">&STDOUT");
+                       pipe(my $outfh, CHILD_STDOUT);
+                       pipe(my $errfh, CHILD_STDERR);
+                       my $pid;
+                       unless ($pid = fork) {
+                               die "mr $action: cannot fork: $!" unless defined $pid;
+                               open(STDOUT, ">&CHILD_STDOUT") || die "mr $action cannot reopen stdout: $!";
+                               open(STDERR, ">&CHILD_STDERR") || die "mr $action cannot reopen stderr: $!";
+                               close CHILD_STDOUT;
+                               close CHILD_STDERR;
+                               close $outfh;
+                               close $errfh;
                                exit action($action, @$repo);
                        }
-                       $jobs{$pid}=$repo;
-                       push @fhs, $fh;
-                       push @out, "";
-                       $SIG{CHLD}=\&reaper;
-                       reaper();
+                       close CHILD_STDOUT;
+                       close CHILD_STDERR;
+                       push @active, [$pid, $repo];
+                       push @fhs, [$outfh, $errfh];
+                       push @out, ['',     ''];
                }
-               my ($rin, $rout) = ('','', '');
+               my ($rin, $rout) = ('','');
                my $nfound;
-               foreach my $x (@fhs) {
-                       next unless defined $x;
-                       vec($rin, fileno($x), 1) = 1;
+               foreach my $fh (@fhs) {
+                       next unless defined $fh;
+                       vec($rin, fileno($fh->[0]), 1) = 1 if defined $fh->[0];
+                       vec($rin, fileno($fh->[1]), 1) = 1 if defined $fh->[1];
                }
                $nfound = select($rout=$rin, undef, undef, 1);
-               foreach my $i (0..$#fhs) {
-                       my $fh = $fhs[$i];
-                       next unless defined $fh;
-                       if (vec($rout, fileno($fh), 1) == 1) {
-                               my $r = '';
-                               if (sysread($fh, $r, 1024) == 0) {
-                                       close($fh);
-                                       $fhs[$i] = undef;
-                                       $running--;
-                                       print $out[$i];
-                                       $out[$i]='';
+               foreach my $channel (0, 1) {
+                       foreach my $i (0..$#fhs) {
+                               next unless defined $fhs[$i];
+                               my $fh = $fhs[$i][$channel];
+                               next unless defined $fh;
+                               if (vec($rout, fileno($fh), 1) == 1) {
+                                       my $r = '';
+                                       if (sysread($fh, $r, 1024) == 0) {
+                                               close($fh);
+                                               $fhs[$i][$channel] = undef;
+                                               if (! defined $fhs[$i][0] &&
+                                                   ! defined $fhs[$i][1]) {
+                                                       waitpid($active[$i][0], 0);
+                                                       print STDOUT $out[$i][0];
+                                                       print STDERR $out[$i][1];
+                                                       print "\n";
+                                                       record($active[$i][1], $? >> 8);
+                                                       splice(@fhs, $i, 1);
+                                                       splice(@active, $i, 1);
+                                                       splice(@out, $i, 1);
+                                                       $running--;
+                                               }
+                                       }
+                                       $out[$i][$channel] .= $r;
                                }
-                               $out[$i] .= $r;
                        }
                }
-               while (@fhs and !defined $fhs[0]) {
-                       shift @fhs;
-                       shift @out;
-               }
        }
 } #}}}
 
-sub reaper { #{{{
-       while ((my $pid = waitpid(-1, &WNOHANG)) > 0) {
-               record($jobs{$pid}, $? >> 8) if exists $jobs{$pid};
-       }
-} #}}}
-               
 sub record { #{{{
        my $dir=shift()->[0];
        my $ret=shift;
@@ -891,6 +899,9 @@ lib =
                exit 1
        }
        hours_since() {
+               if [ -z "$1" ] || [ -z "$2" ]; then
+                       error "mr: usage: hours_since action num"
+               fi
                for dir in .git .svn .bzr CVS .hg; do
                        if [ -e "$MR_REPO/$dir" ]; then
                                flagfile="$MR_REPO/$dir/.mr_last$1"
@@ -900,8 +911,13 @@ lib =
                if [ -z "$flagfile" ]; then
                        error "cannot determine flag filename"
                fi
-               perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"
-               touch "$flagfile"
+               delta=$(perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile")
+               if [ "$delta" -lt "$2" ]; then
+                       exit 0
+               else
+                       touch "$flagfile"
+                       exit 1
+               fi
        }
 
 update =