=item --quiet
-Be quiet.
+Be quiet. This supresses mr's usual output, as well as any output from
+commands that are run (including stderr output). If a command fails,
+the output will be shown.
=item -k
Here is an example .mrconfig file:
[src]
- checkout = svn co svn://svn.example.com/src/trunk src
+ checkout = svn checkout svn://svn.example.com/src/trunk src
chain = true
[src/linux-2.6]
Within a section, each parameter defines a shell command to run to handle a
given action. mr contains default handlers for "update", "status",
-"commit", and other standard actions. Normally you only need to specify what
-to do for "checkout".
+"commit", and other standard actions.
+
+Normally you only need to specify what to do for "checkout". Here you
+specify the command to run in order to create a checkout of the repository.
+The command will be run in the parent directory, and must create the
+repository's directory. So use "git clone", "svn checkout", "bzr branch"
+or "bzr checkout" (for a bound branch), etc.
Note that these shell commands are run in a "set -e" shell
environment, where any additional parameters you pass are available in
-"$@". The "checkout" command is run in the parent of the repository
-directory, since the repository isn't checked out yet. All other commands
-are run inside the repository, though not necessarily at the top of it.
+"$@". All commands other than "checkout" are run inside the repository,
+though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the
repository. (For the "register" action, "MR_REPO" is instead set to the
that defines the repo being acted on, or, if the repo is not yet in a config
file, the .mrconfig file that should be modified to register the repo.
+The "MR_ACTION" environment variable is set to the command being run
+(update, checkout, etc).
+
A few parameters have special meanings:
=over 4
will skip acting on that repository. The command is passed the action
name in $1.
-Here are two examples. The first skips the repo unless
+Here are three examples. The first skips the repo unless
mr is run by joey. The second uses the hours_since function
(included in mr's built-in library) to skip updating the repo unless it's
-been at least 12 hours since the last update.
+been at least 12 hours since the last update. The third skips operating
+on the repo unless it already exists (use mr checkout to enable the repo).
skip = test `whoami` != joey
skip = [ "$1" = update ] && ! hours_since "$1" 12
+ skip = lazy
=item order
Unlike all other parameters, this parameter does not need to be placed
within a section.
+=item deleted
+
+If the "deleted" parameter is set and its command returns true, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repository's directory.
+This is useful when one mrconfig file is shared amoung multiple machines,
+to keep track of and remember to delete old repositories.
+
=item lib
The "lib" parameter can specify some shell code that will be run before each
my $is_update=($action =~ /update/);
$ENV{MR_REPO}=$dir;
+ $ENV{MR_ACTION}=$action;
+
+ foreach my $testname ("skip", "deleted") {
+ my $testcommand=findcommand($testname, $dir, $topdir, $subdir, $is_checkout);
+
+ if (defined $testcommand) {
+ my $test="set -e;".$lib.
+ "my_action(){ $testcommand\n }; my_action '$action'";
+ print "mr $action: running $testname test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ return ABORT;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: $testname test received signal ".($? & 127)."\n";
+ return ABORT;
+ }
+ }
+ if ($ret >> 8 == 0) {
+ if ($testname eq "deleted") {
+ if (-d $dir) {
+ print STDERR "mr error: $dir should be deleted yet still exists\n";
+ return FAILED;
+ }
+ }
+ print "mr $action: skip $dir skipped\n" if $verbose;
+ return SKIPPED;
+ }
+ }
+ }
if ($is_checkout) {
if (! $force_checkout) {
}
}
- my $skiptest=findcommand("skip", $dir, $topdir, $subdir, $is_checkout);
my $command=findcommand($action, $dir, $topdir, $subdir, $is_checkout);
- if (defined $skiptest) {
- my $test="set -e;".$lib.
- "my_action(){ $skiptest\n }; my_action '$action'";
- print "mr $action: running skip test >>$test<<\n" if $verbose;
- my $ret=system($test);
- if ($ret != 0) {
- if (($? & 127) == 2) {
- print STDERR "mr $action: interrupted\n";
- return ABORT;
- }
- elsif ($? & 127) {
- print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
- return ABORT;
- }
- }
- if ($ret >> 8 == 0) {
- print "mr $action: $dir skipped per config file\n" if $verbose;
- return SKIPPED;
- }
- }
-
if ($is_checkout && ! -d $dir) {
print "mr $action: creating parent directory $dir\n" if $verbose;
system("mkdir", "-p", $dir);
}
}
else {
+ my $actionmsg;
if (! $no_chdir) {
- print "mr $action: $fulldir\n" unless $quiet;
+ $actionmsg="mr $action: $fulldir";
}
else {
my $s=$directory;
$s=~s/^\Q$fulldir\E\/?//;
- print "mr $action: $fulldir (in subdir $s)\n" unless $quiet;
+ $actionmsg="mr $action: $fulldir (in subdir $s)";
}
+ print "$actionmsg\n" unless $quiet;
my $hookret=hook("pre_$action", $topdir, $subdir);
return $hookret if $hookret != OK;
"my_action(){ $command\n }; my_action ".
join(" ", map { s/\\/\\\\/g; s/"/\"/g; '"'.$_.'"' } @ARGV);
print "mr $action: running >>$command<<\n" if $verbose;
- my $ret=system($command);
+ my $ret;
+ if ($quiet) {
+ my $output = qx/$command 2>&1/;
+ $ret = $?;
+ if ($ret != 0) {
+ print "$actionmsg\n";
+ print STDERR $output;
+ }
+ }
+ else {
+ $ret=system($command);
+ }
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $action: interrupted\n";
my $shell="set -e;".$lib.
"my_hook(){ $command\n }; my_hook";
print "mr $hook: running >>$shell<<\n" if $verbose;
- my $ret=system($shell);
+ my $ret;
+ if ($quiet) {
+ my $output = qx/$shell 2>&1/;
+ $ret = $?;
+ if ($ret != 0) {
+ print STDERR $output;
+ }
+ }
+ else {
+ $ret=system($shell);
+ }
if ($ret != 0) {
if (($? & 127) == 2) {
print STDERR "mr $hook: interrupted\n";
print STDERR "mr $hook: received signal ".($? & 127)."\n";
return ABORT;
}
+ else {
+ return FAILED;
+ }
}
return OK;
is_trusted_repo($words[$c])
);
}
- elsif (defined $words[$c] && $twords[$c] eq $words[$c]) {
+ elsif (defined $words[$c] && $words[$c]=~/^($twords[$c])$/) {
$match=1;
}
else {
}
sub trusterror {
- die shift()."\n".
- "(To trust this file, list it in ~/.mrtrust.)\n";
+ my ($err, $file, $line, $url)=@_;
+
+ if (defined $url) {
+ die "$err in untrusted $url line $line\n".
+ "(To trust this url, --trust-all can be used; but please use caution;\n".
+ "this can allow arbitrary code execution!)\n";
+ }
+ else {
+ die "$err in untrusted $file line $line\n".
+ "(To trust this file, list it in ~/.mrtrust.)\n";
+ }
}
my %loaded;
sub loadconfig {
my $f=shift;
my $dir=shift;
+ my $bootstrap_url=shift;
my @toload;
$trusted=1;
}
else {
- if (! -e $f) {
- return;
- }
-
my $absf=abs_path($f);
if ($loaded{$absf}) {
return;
}
}
+ if (! -e $f) {
+ return;
+ }
+
print "mr: loading config $f\n" if $verbose;
open($in, "<", $f) || die "mr: open $f: $!\n";
}
if (! is_trusted_repo($section) ||
$section eq 'ALIAS' ||
$section eq 'DEFAULT') {
- trusterror "mr: illegal section \"[$section]\" in untrusted $f line $line";
+ trusterror("mr: illegal section \"[$section]\"", $f, $line, $bootstrap_url)
}
}
$section=expandenv($section) if $trusted;
}
if (! $trusted) {
- # Untrusted files can only contain checkout
- # parameters.
- if ($parameter ne 'checkout') {
- trusterror "mr: illegal setting \"$parameter=$value\" in untrusted $f line $line";
+ # Untrusted files can only contain a few
+ # settings in specific known-safe formats.
+ if ($parameter eq 'checkout') {
+ if (! is_trusted_checkout($value)) {
+ trusterror("mr: illegal checkout command \"$value\"", $f, $line, $bootstrap_url);
+ }
}
- if (! is_trusted_checkout($value)) {
- trusterror "mr: illegal checkout command \"$value\" in untrusted $f line $line";
+ elsif ($parameter eq 'order') {
+ # not interpreted as a command, so
+ # safe.
+ }
+ elsif ($value eq 'true' || $value eq 'false') {
+ # skip=true , deleted=true etc are
+ # safe.
+ }
+ else {
+ trusterror("mr: illegal setting \"$parameter=$value\"", $f, $line, $bootstrap_url);
}
}
$knownactions{$parameter}=1;
}
if ($parameter eq 'chain' &&
- length $dir && $section ne "DEFAULT" &&
- -e $dir.$section."/.mrconfig") {
- my $ret=system($value);
- if ($ret != 0) {
- if (($? & 127) == 2) {
- print STDERR "mr: chain test interrupted\n";
- exit 2;
+ length $dir && $section ne "DEFAULT") {
+ my $chaindir="$section";
+ if ($chaindir !~ m!/!) {
+ $chaindir=$dir.$chaindir;
+ }
+ if (-e "$chaindir/.mrconfig") {
+ my $ret=system($value);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr: chain test interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr: chain test received signal ".($? & 127)."\n";
+ }
}
- elsif ($? & 127) {
- print STDERR "mr: chain test received signal ".($? & 127)."\n";
+ else {
+ push @toload, ["$chaindir/.mrconfig", $chaindir];
}
}
- else {
- push @toload, $dir.$section."/.mrconfig";
- }
}
}
}
}
}
- foreach (@toload) {
- loadconfig($_);
+ foreach my $c (@toload) {
+ loadconfig(@$c);
}
}
# would normally be skipped.
my $topdir=abs_path(".")."/";
my @repo=($topdir, $topdir, ".");
- loadconfig($tmpconfig, $topdir);
+ loadconfig($tmpconfig, $topdir, $url);
record(\@repo, action("checkout", @repo, 1))
if exists $config{$topdir}{"."}{"checkout"};
return 0
fi
}
+ is_bzr_checkout() {
+ LANG=C bzr info | egrep -q '^Checkout'
+ }
+ lazy() {
+ if [ "$MR_ACTION" = checkout ] || [ -d "$MR_REPO" ]; then
+ return 1
+ else
+ return 0
+ fi
+ }
svn_test = test -d "$MR_REPO"/.svn
git_test = test -d "$MR_REPO"/.git
svn_update = svn update "$@"
git_update = git pull "$@"
-bzr_update = bzr merge --pull "$@"
+bzr_update =
+ if is_bzr_checkout; then
+ bzr update "$@"
+ else
+ bzr merge --pull "$@"
+ fi
cvs_update = cvs update "$@"
hg_update = hg pull "$@" && hg update "$@"
darcs_update = darcs pull -a "$@"
svn_commit = svn commit "$@"
git_commit = git commit -a "$@" && git push --all
-bzr_commit = bzr commit "$@" && bzr push
+bzr_commit =
+ if is_bzr_checkout; then
+ bzr commit "$@"
+ else
+ bzr commit "$@" && bzr push
+ fi
cvs_commit = cvs commit "$@"
hg_commit = hg commit -m "$@" && hg push
darcs_commit = darcs record -a -m "$@" && darcs push -a
fossil_commit = fossil commit "$@"
git_record = git commit -a "$@"
-bzr_record = bzr commit "$@"
+bzr_record =
+ if is_bzr_checkout; then
+ bzr commit --local "$@"
+ else
+ bzr commit "$@"
+ fi
hg_record = hg commit -m "$@"
darcs_record = darcs record -a -m "$@"
fossil_record = fossil commit "$@"
error "cannot determine bzr url"
fi
echo "Registering bzr url: $url in $MR_CONFIG"
- mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+ mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr branch '$url' '$MR_REPO'"
cvs_register =
repo=`cat CVS/Repository`
root=`cat CVS/Root`
svn_trusted_checkout = svn co $url $repo
svn_alt_trusted_checkout = svn checkout $url $repo
git_trusted_checkout = git clone $url $repo
-bzr_trusted_checkout = bzr clone $url $repo
+bzr_trusted_checkout = bzr checkout|clone|branch|get $url $repo
# cvs: too hard
hg_trusted_checkout = hg clone $url $repo
darcs_trusted_checkout = darcs get $url $repo
projects / code / myrepos.git / blobdiff