]> git.madduck.net Git - code/myrepos.git/blobdiff - mr

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

* Better error message if more than one repo type test matches a single
[code/myrepos.git] / mr
diff --git a/mr b/mr
index 1253102e5e05f6d71f15dd0eb14ab19341ac9b52..62c6be83af2c6dd015fb8cf7aa5104b999af732f 100755 (executable)
--- a/mr
+++ b/mr
@@ -209,7 +209,11 @@ directory, since the repository isn't checked out yet. All other commands
 are run inside the repository, though not necessarily at the top of it.
 
 The "MR_REPO" environment variable is set to the path to the top of the
 are run inside the repository, though not necessarily at the top of it.
 
 The "MR_REPO" environment variable is set to the path to the top of the
-repository. The "MR_CONFIG" environment variable is set to the .mrconfig file
+repository. (For the "register" action, "MR_REPO" is instead set to the 
+basename of the directory that should be created when checking the
+repository out.)
+
+The "MR_CONFIG" environment variable is set to the .mrconfig file
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
@@ -247,6 +251,15 @@ If the "chain" parameter is set and its command returns true, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
@@ -255,6 +268,18 @@ to use.
 
 =back
 
 
 =back
 
+When looking for a command to run for a given action, mr first looks for
+a parameter with the same name as the action. If that is not found, it
+looks for a parameter named "rcs_action" (substituting in the name of the
+revision control system and the action). The name of the revision control
+system is itself determined by running each defined "rcs_test" action,
+until one succeeds.
+
+Internally, mr has settings for "git_update", "svn_update", etc. To change
+the action that is performed for a given revision control system, you can
+override these rcs specific actions. To add a new revision control system,
+you can just add rcs specific actions for it.
+
 =head1 AUTHOR
 
 Copyright 2007 Joey Hess <joey@kitenet.net>
 =head1 AUTHOR
 
 Copyright 2007 Joey Hess <joey@kitenet.net>
@@ -271,7 +296,8 @@ use warnings;
 use strict;
 use Getopt::Long;
 use Cwd qw(getcwd abs_path);
 use strict;
 use Getopt::Long;
 use Cwd qw(getcwd abs_path);
-use POSIX "WNOHANG";
+
+# things that can happen when mr runs a command
 use constant {
        OK => 0,
        FAILED => 1,
 use constant {
        OK => 0,
        FAILED => 1,
@@ -279,227 +305,74 @@ use constant {
        ABORT => 3,
 };
 
        ABORT => 3,
 };
 
-$SIG{INT}=sub {
-       print STDERR "mr: interrupted\n";
-       exit 2;
-};
-
-$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+# configurables
 my $config_overridden=0;
 my $verbose=0;
 my $stats=0;
 my $no_recurse=0;
 my $config_overridden=0;
 my $verbose=0;
 my $stats=0;
 my $no_recurse=0;
+my $no_chdir=0;
 my $jobs=1;
 my $jobs=1;
+my $directory=getcwd();
+
+# globals :-(
 my %config;
 my %configfiles;
 my %knownactions;
 my %alias;
 my %config;
 my %configfiles;
 my %knownactions;
 my %alias;
-my $directory=getcwd();
+my (@ok, @failed, @skipped);
 
 
-Getopt::Long::Configure("no_permute");
-my $result=GetOptions(
-       "d|directory=s" => sub { $directory=abs_path($_[1]) },
-       "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
-       "v|verbose" => \$verbose,
-       "s|stats" => \$stats,
-       "n|no-recurse" => \$no_recurse,
-       "j|jobs=i" => \$jobs,
-);
-if (! $result || @ARGV < 1) {
-       die("Usage: mr [-d directory] action [params ...]\n".
-           "(Use mr help for man page.)\n");
-
-}
-if (! defined $directory) {
-       die("mr: failed to determine working directory\n");
-}
-
-# Make sure MR_CONFIG is an absolute path, but don't use abs_path since
-# the config file might be a symlink to elsewhere, and the directory it's
-# in is significant.
-if ($ENV{MR_CONFIG} !~ /^\//) {
-       $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
-}
-# Try to set MR_PATH to the path to the program.
-eval {
-       use FindBin qw($Bin $Script);
-       $ENV{MR_PATH}=$Bin."/".$Script;
-};
+main();
 
 
-loadconfig(\*DATA);
-loadconfig($ENV{MR_CONFIG});
-#use Data::Dumper;
-#print Dumper(\%config);
+sub rcs_test { #{{{
+       my ($action, $dir, $topdir, $subdir) = @_;
 
 
-# alias expansion and command stemming
-my $action=shift @ARGV;
-if (exists $alias{$action}) {
-       $action=$alias{$action};
-}
-if (! exists $knownactions{$action}) {
-       my @matches = grep { /^\Q$action\E/ }
-               keys %knownactions, keys %alias;
-       if (@matches == 1) {
-               $action=$matches[0];
+       my $test="set -e\n";
+       foreach my $rcs_test (
+                       sort {
+                               length $a <=> length $b 
+                                         ||
+                                      $a cmp $b
+                       } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
+               my ($rcs)=$rcs_test=~/(.*)_test/;
+               $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
+               $test.="if my_$rcs_test; then echo $rcs; fi\n";
        }
        }
-       elsif (@matches == 0) {
-               die "mr: unknown action \"$action\" (known actions: ".
-                       join(", ", sort keys %knownactions).")\n";
-       }
-       else {
-               die "mr: ambiguous action \"$action\" (matches: ".
-                       join(", ", @matches).")\n";
-       }
-}
-
-# commands that do not operate on all repos
-if ($action eq 'help') {
-       exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
-}
-elsif ($action eq 'config') {
-       if (@ARGV < 2) {
-               die "mr config: not enough parameters\n";
+       $test=$config{$topdir}{$subdir}{lib}."\n".$test
+               if exists $config{$topdir}{$subdir}{lib};
+       
+       print "mr $action: running rcs test >>$test<<\n" if $verbose;
+       my $rcs=`$test`;
+       chomp $rcs;
+       if ($rcs=~/\n/s) {
+               $rcs=~s/\n/, /g;
+               print STDERR "mr $action: found multiple possible repository types ($rcs) for $topdir$subdir\n";
+               return undef;
        }
        }
-       my $section=shift;
-       if ($section=~/^\//) {
-               # try to convert to a path relative to the config file
-               my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
-               $dir=abs_path($dir);
-               $dir.="/" unless $dir=~/\/$/;
-               if ($section=~/^\Q$dir\E(.*)/) {
-                       $section=$1;
-               }
+       if (! length $rcs) {
+               return undef;
        }
        }
-       my %changefields;
-       foreach (@ARGV) {
-               if (/^([^=]+)=(.*)$/) {
-                       $changefields{$1}=$2;
-               }
-               else {
-                       my $found=0;
-                       foreach my $topdir (sort keys %config) {
-                               if (exists $config{$topdir}{$section} &&
-                                   exists $config{$topdir}{$section}{$_}) {
-                                       print $config{$topdir}{$section}{$_}."\n";
-                                       $found=1;
-                                       last if $section eq 'DEFAULT';
-                               }
-                       }
-                       if (! $found) {
-                               die "mr $action: $section $_ not set\n";
-                       }
-               }
-       }
-       modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
-       exit 0;
-}
-elsif ($action eq 'register') {
-       if (! $config_overridden) {
-               # Find the closest known mrconfig file to the current
-               # directory.
-               $directory.="/" unless $directory=~/\/$/;
-               foreach my $topdir (reverse sort keys %config) {
-                       next unless length $topdir;
-                       if ($directory=~/^\Q$topdir\E/) {
-                               $ENV{MR_CONFIG}=$configfiles{$topdir};
-                               last;
-                       }
-               }
+       else {
+               return $rcs;
        }
        }
-       my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
-               "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
-               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-       print STDERR "mr $action: running >>$command<<\n" if $verbose;
-       exec($command) || die "exec: $!";
-}
-
-# an ordered list of repos
-my @list;
-foreach my $topdir (sort keys %config) {
-       foreach my $subdir (sort keys %{$config{$topdir}}) {
-               push @list, {
-                       topdir => $topdir,
-                       subdir => $subdir,
-                       order => $config{$topdir}{$subdir}{order},
-               };
+} #}}}
+       
+sub findcommand { #{{{
+       my ($action, $dir, $topdir, $subdir) = @_;
+       
+       if (exists $config{$topdir}{$subdir}{$action}) {
+               return $config{$topdir}{$subdir}{$action};
        }
        }
-}
-@list = sort {
-               $a->{order}  <=> $b->{order}
-                            ||
-               $a->{topdir} cmp $b->{topdir}
-                            ||
-               $a->{subdir} cmp $b->{subdir}
-       } @list;
 
 
-# work out what repos to act on
-my @repos;
-my $nochdir=0;
-foreach my $repo (@list) {
-       my $topdir=$repo->{topdir};
-       my $subdir=$repo->{subdir};
-
-       next if $subdir eq 'DEFAULT';
-       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
-       my $d=$directory;
-       $dir.="/" unless $dir=~/\/$/;
-       $d.="/" unless $d=~/\/$/;
-       next if $no_recurse && $d ne $dir;
-       next if $dir ne $d && $dir !~ /^\Q$d\E/;
-       push @repos, [$dir, $topdir, $subdir];
-}
-if (! @repos) {
-       # fallback to find a leaf repo
-       foreach my $repo (reverse @list) {
-               my $topdir=$repo->{topdir};
-               my $subdir=$repo->{subdir};
-               
-               next if $subdir eq 'DEFAULT';
-               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
-               my $d=$directory;
-               $dir.="/" unless $dir=~/\/$/;
-               $d.="/" unless $d=~/\/$/;
-               if ($d=~/^\Q$dir\E/) {
-                       push @repos, [$dir, $topdir, $subdir];
-                       last;
-               }
-       }
-       $nochdir=1;
-}
+       my $rcs=rcs_test(@_);
 
 
-# run the action on each repository and print stats
-my (@ok, @failed, @skipped);
-if ($jobs > 1) {
-       mrs(@repos);
-}
-else {
-       foreach my $repo (@repos) {
-               record($repo, action($action, @$repo));
+       if (defined $rcs && 
+           exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
+               return $config{$topdir}{$subdir}{$rcs."_".$action};
        }
        }
-}
-if (! @ok && ! @failed && ! @skipped) {
-       die "mr $action: no repositories found to work on\n";
-}
-print "mr $action: finished (".join("; ",
-       showstat($#ok+1, "ok", "ok"),
-       showstat($#failed+1, "failed", "failed"),
-       showstat($#skipped+1, "skipped", "skipped"),
-).")\n";
-if ($stats) {
-       if (@skipped) {
-               print "mr $action: (skipped: ".join(" ", @skipped).")\n";
-       }
-       if (@failed) {
-               print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+       else {
+               return undef;
        }
        }
-}
-if (@failed) {
-       exit 1;
-}
-elsif (! @ok && @skipped) {
-       exit 1;
-}
-exit 0;
+} #}}}
 
 sub action { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
 
 sub action { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
@@ -526,12 +399,15 @@ sub action { #{{{
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
-       
+
        $ENV{MR_REPO}=$dir;
 
        $ENV{MR_REPO}=$dir;
 
-       if (exists $config{$topdir}{$subdir}{skip}) {
+       my $skiptest=findcommand("skip", $dir, $topdir, $subdir);
+       my $command=findcommand($action, $dir, $topdir, $subdir);
+
+       if (defined $skiptest) {
                my $test="set -e;".$lib.
                my $test="set -e;".$lib.
-                       "my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
+                       "my_action(){ $skiptest\n }; my_action '$action'";
                print "mr $action: running skip test >>$test<<\n" if $verbose;
                my $ret=system($test);
                if ($ret != 0) {
                print "mr $action: running skip test >>$test<<\n" if $verbose;
                my $ret=system($test);
                if ($ret != 0) {
@@ -550,16 +426,23 @@ sub action { #{{{
                }
        }
        
                }
        }
        
-       if (! $nochdir && ! chdir($dir)) {
+       if (! $no_chdir && ! chdir($dir)) {
                print STDERR "mr $action: failed to chdir to $dir: $!\n";
                return FAILED;
        }
                print STDERR "mr $action: failed to chdir to $dir: $!\n";
                return FAILED;
        }
-       elsif (! exists $config{$topdir}{$subdir}{$action}) {
-               print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
-               return SKIPPED;
+       elsif (! defined $command) {
+               my $rcs=rcs_test(@_);
+               if (! defined $rcs) {
+                       print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n";
+                       return FAILED;
+               }
+               else {
+                       print STDERR "mr $action: no defined $action command for $rcs repository $topdir$subdir, skipping\n";
+                       return SKIPPED;
+               }
        }
        else {
        }
        else {
-               if (! $nochdir) {
+               if (! $no_chdir) {
                        print "mr $action: $topdir$subdir\n";
                }
                else {
                        print "mr $action: $topdir$subdir\n";
                }
                else {
@@ -567,10 +450,10 @@ sub action { #{{{
                        $s=~s/^\Q$topdir$subdir\E\/?//;
                        print "mr $action: $topdir$subdir (in subdir $s)\n";
                }
                        $s=~s/^\Q$topdir$subdir\E\/?//;
                        print "mr $action: $topdir$subdir (in subdir $s)\n";
                }
-               my $command="set -e; ".$lib.
-                       "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ".
+               $command="set -e; ".$lib.
+                       "my_action(){ $command\n }; my_action ".
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-               print STDERR "mr $action: running >>$command<<\n" if $verbose;
+               print "mr $action: running >>$command<<\n" if $verbose;
                my $ret=system($command);
                if ($ret != 0) {
                        if (($? & 127) == 2) {
                my $ret=system($command);
                if ($ret != 0) {
                        if (($? & 127) == 2) {
@@ -603,6 +486,9 @@ sub action { #{{{
 
 # run actions on multiple repos, in parallel
 sub mrs { #{{{
 
 # run actions on multiple repos, in parallel
 sub mrs { #{{{
+       my $action=shift;
+       my @repos=@_;
+
        $| = 1;
        my @active;
        my @fhs;
        $| = 1;
        my @active;
        my @fhs;
@@ -691,6 +577,26 @@ sub record { #{{{
        }
 } #}}}
 
        }
 } #}}}
 
+sub showstats { #{{{
+       my $action=shift;
+       if (! @ok && ! @failed && ! @skipped) {
+               die "mr $action: no repositories found to work on\n";
+       }
+       print "mr $action: finished (".join("; ",
+               showstat($#ok+1, "ok", "ok"),
+               showstat($#failed+1, "failed", "failed"),
+               showstat($#skipped+1, "skipped", "skipped"),
+       ).")\n";
+       if ($stats) {
+               if (@skipped) {
+                       print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+               }
+               if (@failed) {
+                       print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+               }
+       }
+} #}}}
+
 sub showstat { #{{{
        my $count=shift;
        my $singular=shift;
 sub showstat { #{{{
        my $count=shift;
        my $singular=shift;
@@ -701,6 +607,64 @@ sub showstat { #{{{
        return;
 } #}}}
 
        return;
 } #}}}
 
+# an ordered list of repos
+sub repolist { #{{{
+       my @list;
+       foreach my $topdir (sort keys %config) {
+               foreach my $subdir (sort keys %{$config{$topdir}}) {
+                       push @list, {
+                               topdir => $topdir,
+                               subdir => $subdir,
+                               order => $config{$topdir}{$subdir}{order},
+                       };
+               }
+       }
+       return sort {
+               $a->{order}  <=> $b->{order}
+                            ||
+               $a->{topdir} cmp $b->{topdir}
+                            ||
+               $a->{subdir} cmp $b->{subdir}
+       } @list;
+} #}}}
+
+# figure out which repos to act on
+sub selectrepos { #{{{
+       my @repos;
+       foreach my $repo (repolist()) {
+               my $topdir=$repo->{topdir};
+               my $subdir=$repo->{subdir};
+
+               next if $subdir eq 'DEFAULT';
+               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+               my $d=$directory;
+               $dir.="/" unless $dir=~/\/$/;
+               $d.="/" unless $d=~/\/$/;
+               next if $no_recurse && $d ne $dir;
+               next if $dir ne $d && $dir !~ /^\Q$d\E/;
+               push @repos, [$dir, $topdir, $subdir];
+       }
+       if (! @repos) {
+               # fallback to find a leaf repo
+               foreach my $repo (reverse repolist()) {
+                       my $topdir=$repo->{topdir};
+                       my $subdir=$repo->{subdir};
+                       
+                       next if $subdir eq 'DEFAULT';
+                       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+                       my $d=$directory;
+                       $dir.="/" unless $dir=~/\/$/;
+                       $d.="/" unless $d=~/\/$/;
+                       if ($d=~/^\Q$dir\E/) {
+                               push @repos, [$dir, $topdir, $subdir];
+                               last;
+                       }
+               }
+               $no_chdir=1;
+       }
+       return @repos;
+} #}}}
+
 my %loaded;
 sub loadconfig { #{{{
        my $f=shift;
 my %loaded;
 sub loadconfig { #{{{
        my $f=shift;
@@ -775,6 +739,12 @@ sub loadconfig { #{{{
                                chomp $value;
                        }
 
                                chomp $value;
                        }
 
+                       if ($parameter eq "include") {
+                               print "mr: including output of \"$value\"\n" if $verbose;
+                               unshift @lines, `$value`;
+                               next;
+                       }
+
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
@@ -792,18 +762,23 @@ sub loadconfig { #{{{
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
-                               $knownactions{$parameter}=1;
+                               if ($parameter =~ /.*_(.*)/) {
+                                       $knownactions{$1}=1;
+                               }
+                               else {
+                                       $knownactions{$parameter}=1;
+                               }
                                if ($parameter eq 'chain' &&
                                    length $dir && $section ne "DEFAULT" &&
                                    -e $dir.$section."/.mrconfig") {
                                        my $ret=system($value);
                                        if ($ret != 0) {
                                                if (($? & 127) == 2) {
                                if ($parameter eq 'chain' &&
                                    length $dir && $section ne "DEFAULT" &&
                                    -e $dir.$section."/.mrconfig") {
                                        my $ret=system($value);
                                        if ($ret != 0) {
                                                if (($? & 127) == 2) {
-                                                       print STDERR "mr $action: chain test interrupted\n";
+                                                       print STDERR "mr: chain test interrupted\n";
                                                        exit 2;
                                                }
                                                elsif ($? & 127) {
                                                        exit 2;
                                                }
                                                elsif ($? & 127) {
-                                                       print STDERR "mr $action: chain test received signal ".($? & 127)."\n";
+                                                       print STDERR "mr: chain test received signal ".($? & 127)."\n";
                                                }
                                        }
                                        else {
                                                }
                                        }
                                        else {
@@ -919,6 +894,200 @@ sub modifyconfig { #{{{
        close $out;     
 } #}}}
 
        close $out;     
 } #}}}
 
+sub dispatch { #{{{
+       my $action=shift;
+
+       # actions that do not operate on all repos
+       if ($action eq 'help') {
+               help(@ARGV);
+       }
+       elsif ($action eq 'config') {
+               config(@ARGV);
+       }
+       elsif ($action eq 'register') {
+               register(@ARGV);
+       }
+
+       if ($jobs > 1) {
+               mrs($action, selectrepos());
+       }
+       else {
+               foreach my $repo (selectrepos()) {
+                       record($repo, action($action, @$repo));
+               }
+       }
+} #}}}
+
+sub help { #{{{
+       exec($config{''}{DEFAULT}{help}) || die "exec: $!";
+} #}}}
+       
+sub config { #{{{
+       if (@_ < 2) {
+               die "mr config: not enough parameters\n";
+       }
+       my $section=shift;
+       if ($section=~/^\//) {
+               # try to convert to a path relative to the config file
+               my ($dir)=$ENV{MR_CONFIG}=~/^(.*\/)[^\/]+$/;
+               $dir=abs_path($dir);
+               $dir.="/" unless $dir=~/\/$/;
+               if ($section=~/^\Q$dir\E(.*)/) {
+                       $section=$1;
+               }
+       }
+       my %changefields;
+       foreach (@_) {
+               if (/^([^=]+)=(.*)$/) {
+                       $changefields{$1}=$2;
+               }
+               else {
+                       my $found=0;
+                       foreach my $topdir (sort keys %config) {
+                               if (exists $config{$topdir}{$section} &&
+                                   exists $config{$topdir}{$section}{$_}) {
+                                       print $config{$topdir}{$section}{$_}."\n";
+                                       $found=1;
+                                       last if $section eq 'DEFAULT';
+                               }
+                       }
+                       if (! $found) {
+                               die "mr config: $section $_ not set\n";
+                       }
+               }
+       }
+       modifyconfig($ENV{MR_CONFIG}, $section, %changefields) if %changefields;
+       exit 0;
+} #}}}
+
+sub register { #{{{
+       if (! $config_overridden) {
+               # Find the closest known mrconfig file to the current
+               # directory.
+               $directory.="/" unless $directory=~/\/$/;
+               my $foundconfig=0;
+               foreach my $topdir (reverse sort keys %config) {
+                       next unless length $topdir;
+                       if ($directory=~/^\Q$topdir\E/) {
+                               $ENV{MR_CONFIG}=$configfiles{$topdir};
+                               $directory=$topdir;
+                               $foundconfig=1;
+                               last;
+                       }
+               }
+               if (! $foundconfig) {
+                       $directory=""; # no config file, use builtin
+               }
+       }
+       if (@ARGV) {
+               my $subdir=shift @ARGV;
+               if (! chdir($subdir)) {
+                       print STDERR "mr register: failed to chdir to $subdir: $!\n";
+               }
+       }
+
+       $ENV{MR_REPO}=getcwd();
+       my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT');
+       if (! defined $command) {
+               die "mr register: unknown repository type\n";
+       }
+
+       $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+       $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+               "my_action(){ $command\n }; my_action ".
+               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+       print "mr register: running >>$command<<\n" if $verbose;
+       exec($command) || die "exec: $!";
+} #}}}
+
+# alias expansion and command stemming
+sub expandaction { #{{{
+       my $action=shift;
+       if (exists $alias{$action}) {
+               $action=$alias{$action};
+       }
+       if (! exists $knownactions{$action}) {
+               my @matches = grep { /^\Q$action\E/ }
+                       keys %knownactions, keys %alias;
+               if (@matches == 1) {
+                       $action=$matches[0];
+               }
+               elsif (@matches == 0) {
+                       die "mr: unknown action \"$action\" (known actions: ".
+                               join(", ", sort keys %knownactions).")\n";
+               }
+               else {
+                       die "mr: ambiguous action \"$action\" (matches: ".
+                               join(", ", @matches).")\n";
+               }
+       }
+       return $action;
+} #}}}
+
+sub getopts { #{{{
+       Getopt::Long::Configure("bundling", "no_permute");
+       my $result=GetOptions(
+               "d|directory=s" => sub { $directory=abs_path($_[1]) },
+               "c|config=s" => sub { $ENV{MR_CONFIG}=$_[1]; $config_overridden=1 },
+               "v|verbose" => \$verbose,
+               "s|stats" => \$stats,
+               "n|no-recurse" => \$no_recurse,
+               "j|jobs=i" => \$jobs,
+       );
+       if (! $result || @ARGV < 1) {
+               die("Usage: mr [-d directory] action [params ...]\n".
+                   "(Use mr help for man page.)\n");
+       }
+} #}}}
+
+sub init { #{{{
+       $SIG{INT}=sub {
+               print STDERR "mr: interrupted\n";
+               exit 2;
+       };
+       
+       $ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
+
+       # This can happen if it's run in a directory that was removed
+       # or other strangeness.
+       if (! defined $directory) {
+               die("mr: failed to determine working directory\n");
+       }
+       # Make sure MR_CONFIG is an absolute path, but don't use abs_path since
+       # the config file might be a symlink to elsewhere, and the directory it's
+       # in is significant.
+       if ($ENV{MR_CONFIG} !~ /^\//) {
+               $ENV{MR_CONFIG}=getcwd()."/".$ENV{MR_CONFIG};
+       }
+       # Try to set MR_PATH to the path to the program.
+       eval {
+               use FindBin qw($Bin $Script);
+               $ENV{MR_PATH}=$Bin."/".$Script;
+       };
+} #}}}
+
+sub main { #{{{
+       getopts();
+       init();
+       loadconfig(\*DATA);
+       loadconfig($ENV{MR_CONFIG});
+       #use Data::Dumper; print Dumper(\%config);
+
+       my $action=expandaction(shift @ARGV);
+       dispatch($action);
+       showstats($action);
+
+       if (@failed) {
+               exit 1;
+       }
+       elsif (! @ok && @skipped) {
+               exit 1;
+       }
+       else {
+               exit 0;
+       }
+} #}}}
+
 # Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
 #DATA{{{
 # Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
 #DATA{{{
@@ -935,6 +1104,12 @@ lib =
                echo "mr: $@" >&2
                exit 1
        }
                echo "mr: $@" >&2
                exit 1
        }
+       warning() {
+               echo "mr (warning): $@" >&2
+       }
+       info() {
+               echo "mr: $@" >&2
+       }
        hours_since() {
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
        hours_since() {
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
@@ -957,138 +1132,98 @@ lib =
                fi
        }
 
                fi
        }
 
-update =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn update "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               if [ -z "$@" ]; then
-                       git pull -t origin master
-               else
-                       git pull "$@"
-               fi
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr merge "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs update "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg pull "$@" && hg update "$@"
-       elif [ -d "$MR_REPO"/_darcs ]; then
-               darcs pull -a "$@"
-       else
-               error "unknown repo type"
-       fi
-status =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn status "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git status "$@" || true
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr status "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs status "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg status "$@"
-       elif [ -d "$MR_REPO"/_darcs ]; then
-               darcs whatsnew -ls "$@"
-       else
-               error "unknown repo type"
+svn_test = test -d "$MR_REPO"/.svn
+git_test = test -d "$MR_REPO"/.git
+bzr_test = test -d "$MR_REPO"/.bzr
+cvs_test = test -d "$MR_REPO"/CVS
+hg_test  = test -d "$MR_REPO"/.hg
+darcs_test = test -d "$MR_REPO"/_darcs
+git_bare_test =
+       test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
+       test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
+       test "$(GIT_CONFIG="$MR_REPO"/config git config --get core.bare)" = true
+
+svn_update = svn update "$@"
+git_update = if [ "$@" ]; then git pull "$@"; else git pull -t origin master; fi
+bzr_update = bzr merge "$@"
+cvs_update = cvs update "$@"
+hg_update  = hg pull "$@" && hg update "$@"
+darcs_update = darcs pull -a "$@"
+
+svn_status = svn status "$@"
+git_status = git status "$@" || true
+bzr_status = bzr status "$@"
+cvs_status = cvs status "$@"
+hg_status  = hg status "$@"
+darcs_status = darcs whatsnew -ls "$@"
+
+svn_commit = svn commit "$@"
+git_commit = git commit -a "$@" && git push --all
+bzr_commit = bzr commit "$@" && bzr push
+cvs_commit = cvs commit "$@"
+hg_commit  = hg commit -m "$@" && hg push
+darcs_commit = darcs commit -a -m "$@" && darcs push -a
+
+svn_diff = svn diff "$@"
+git_diff = git diff "$@"
+bzr_diff = bzr diff "$@"
+cvs_diff = cvs diff "$@"
+hg_diff  = hg diff "$@"
+darcs_diff = darcs diff "$@"
+
+svn_log = svn log "$@"
+git_log = git log "$@"
+bzr_log = bzr log "$@"
+cvs_log = cvs log "$@"
+hg_log  = hg log "$@"
+darcs_log = darcs changes "$@"
+git_bare_log = git log "$@"
+
+svn_register =
+       url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
+       if [ -z "$url" ]; then
+               error "cannot determine svn url"
        fi
        fi
-commit =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn commit "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git commit -a "$@" && git push --all
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr commit "$@" && bzr push
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs commit "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg commit -m "$@" && hg push
-       elif [ -d "$MR_REPO"/_darcs ]; then
-               darcs commit -a -m "$@" && darcs push -a
-       else
-               error "unknown repo type"
+       echo "Registering svn url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
+git_register = 
+       url="$(LANG=C git config --get remote.origin.url)" || true
+       if [ -z "$url" ]; then
+               error "cannot determine git url"
        fi
        fi
-diff =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn diff "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git diff "$@"
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr diff "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs diff "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg diff "$@"
-       elif [ -d "$MR_REPO"/_darcs ]; then
-               darcs diff "$@"
-       else
-               error "unknown repo type"
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
+bzr_register =
+       url=$(cat .bzr/branch/parent)
+       if [ -z "$url" ]; then
+               error "cannot determine bzr url"
        fi
        fi
-log =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn log"$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git log "$@"
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr log "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs log "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg log "$@"
-       elif [ -d "$MR_REPO"/_darcs ]; then
-               darcs changes "$@"
-       else
-               error "unknown repo type"
-       fi
-register =
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="$(basename $(pwd))"
-       if [ -d .svn ]; then
-               url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
-               if [ -z "$url" ]; then
-                       error "cannot determine svn url"
-               fi
-               echo "Registering svn url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="svn co $url $basedir"
-       elif [ -d .git ]; then
-               url=$(LANG=C git-config --get remote.origin.url)
-               if [ -z "$url" ]; then
-                       error "cannot determine git url"
-               fi
-               echo "Registering git url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="git clone $url $basedir"
-       elif [ -d .bzr ]; then
-               url=$(cat .bzr/branch/parent)
-               if [ -z "$url" ]; then
-                       error "cannot determine bzr url"
+       echo "Registering bzr url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+cvs_register =
+       repo=$(cat CVS/Repository)
+       root=$(cat CVS/Root)
+       if [ -z "$root" ]; then
+               error "cannot determine cvs root"
                fi
                fi
-               echo "Registering bzr url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="bzr clone $url $basedir"
-       elif [ -d CVS ]; then
-               repo=$(cat CVS/Repository)
-               root=$(cat CVS/Root)
-               if [ -z "$root" ]; then
-                       error "cannot determine cvs root"
-               fi
-               echo "Registering cvs repository $repo at root $root"
-               mr -c "$MR_CONFIG" config "$(pwd)" \
-                       checkout="cvs -d '$root' co -d $basedir $repo"
-       elif [ -d .hg ]; then
-               url=$(hg showconfig paths.default)
-               echo "Registering mercurial repo url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" \
-                       checkout="hg clone $url $basedir"
-       elif [ -d _darcs ]; then
-               url=$(cat _darcs/prefs/defaultrepo)
-               echo "Registering darcs repository $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" \
-                       checkout="darcs get $url $basedir"
-       else
-               error "unable to register this repo type"
+       echo "Registering cvs repository $repo at root $root"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
+hg_register = 
+       url=$(hg showconfig paths.default)
+       echo "Registering mercurial repo url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
+darcs_register = 
+       url=$(cat _darcs/prefs/defaultrepo)
+       echo "Registering darcs repository $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url'p '$MR_REPO'"
+git_bare_register = 
+       url="$(LANG=C GIT_CONFIG=config git config --get remote.origin.url)" || true
+       if [ -z "$url" ]; then
+               error "cannot determine git url"
        fi
        fi
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+
 help =
        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
 help =
        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
@@ -1101,3 +1236,5 @@ ed = echo "A horse is a horse, of course, of course.."
 T = echo "I pity the fool."
 right = echo "Not found."
 #}}}
 T = echo "I pity the fool."
 right = echo "Not found."
 #}}}
+
+# vim:sw=8:sts=0:ts=8:noet