]> git.madduck.net Git - code/myrepos.git/blobdiff - mr

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

projects / code / myrepos.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
remove set -x
[code/myrepos.git] / mr
diff --git a/mr b/mr
index 59d6a699cf94421b2477fdc4392fb8cb95ef36e6..494e89bd4bb05a4ca5bcdded5fc81c94ef6ae6e8 100755 (executable)
--- a/mr
+++ b/mr
@@ -30,9 +30,9 @@ B<mr> [options] action [params ...]
 
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined
 
 B<mr> is a Multiple Repository management tool. It can checkout, update, or
 perform other actions on a set of repositories as if they were one combined
-respository. It supports any combination of subversion, git, cvs, mecurial and
-bzr repositories, and support for other revision control systems can easily be
-added.
+respository. It supports any combination of subversion, git, cvs, mecurial,
+bzr and darcs repositories, and support for other revision control systems can
+easily be added.
 
 B<mr> cds into and operates on all registered repositories at or below your
 working directory. Or, if you are in a subdirectory of a repository that
 
 B<mr> cds into and operates on all registered repositories at or below your
 working directory. Or, if you are in a subdirectory of a repository that
@@ -209,7 +209,11 @@ directory, since the repository isn't checked out yet. All other commands
 are run inside the repository, though not necessarily at the top of it.
 
 The "MR_REPO" environment variable is set to the path to the top of the
 are run inside the repository, though not necessarily at the top of it.
 
 The "MR_REPO" environment variable is set to the path to the top of the
-repository. The "MR_CONFIG" environment variable is set to the .mrconfig file
+repository. (For the "register" action, "MR_REPO" is instead set to the 
+basename of the directory that should be created when checking the
+repository out.)
+
+The "MR_CONFIG" environment variable is set to the .mrconfig file
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
 that defines the repo being acted on, or, if the repo is not yet in a config
 file, the .mrconfig file that should be modified to register the repo.
 
@@ -247,6 +251,15 @@ If the "chain" parameter is set and its command returns true, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
 will try to load a .mrconfig file from the root of the repository. (You
 should avoid chaining from repositories with untrusted committers.)
 
+=item include
+
+If the "include" parameter is set, its command is ran, and should output
+additional mrconfig file content. The content is included as if it were
+part of the including file.
+
+Unlike all other parameters, this parameter does not need to be placed
+within a section.
+
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
 =item lib
 
 The "lib" parameter can specify some shell code that will be run before each
@@ -255,6 +268,18 @@ to use.
 
 =back
 
 
 =back
 
+When looking for a command to run for a given action, mr first looks for
+a parameter with the same name as the action. If that is not found, it
+looks for a parameter named "rcs_action" (substituting in the name of the
+revision control system and the action). The name of the revision control
+system is itself determined by running each defined "rcs_test" action,
+until one succeeds.
+
+Internally, mr has settings for "git_update", "svn_update", etc. To change
+the action that is performed for a given revision control system, you can
+override these rcs specific actions. To add a new revision control system,
+you can just add rcs specific actions for it.
+
 =head1 AUTHOR
 
 Copyright 2007 Joey Hess <joey@kitenet.net>
 =head1 AUTHOR
 
 Copyright 2007 Joey Hess <joey@kitenet.net>
@@ -402,14 +427,29 @@ elsif ($action eq 'register') {
                        next unless length $topdir;
                        if ($directory=~/^\Q$topdir\E/) {
                                $ENV{MR_CONFIG}=$configfiles{$topdir};
                        next unless length $topdir;
                        if ($directory=~/^\Q$topdir\E/) {
                                $ENV{MR_CONFIG}=$configfiles{$topdir};
+                               $directory=$topdir;
                                last;
                        }
                }
        }
                                last;
                        }
                }
        }
-       my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
-               "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
+       if (@ARGV) {
+               my $subdir=shift @ARGV;
+               if (! chdir($subdir)) {
+                       print STDERR "mr $action: failed to chdir to $subdir: $!\n";
+               }
+       }
+
+       $ENV{MR_REPO}=getcwd();
+       my $command=findcommand("register", $ENV{MR_REPO}, $directory, 'DEFAULT');
+       if (! defined $command) {
+               die "mr $action: unknown repository type\n";
+       }
+
+       $ENV{MR_REPO}=~s/.*\/(.*)/$1/;
+       $command="set -e; ".$config{$directory}{DEFAULT}{lib}."\n".
+               "my_action(){ $command\n }; my_action ".
                join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
                join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-       print STDERR "mr $action: running >>$command<<\n" if $verbose;
+       print "mr $action: running >>$command<<\n" if $verbose;
        exec($command) || die "exec: $!";
 }
 
        exec($command) || die "exec: $!";
 }
 
@@ -475,7 +515,6 @@ if ($jobs > 1) {
 else {
        foreach my $repo (@repos) {
                record($repo, action($action, @$repo));
 else {
        foreach my $repo (@repos) {
                record($repo, action($action, @$repo));
-               print "\n";
        }
 }
 if (! @ok && ! @failed && ! @skipped) {
        }
 }
 if (! @ok && ! @failed && ! @skipped) {
@@ -502,6 +541,52 @@ elsif (! @ok && @skipped) {
 }
 exit 0;
 
 }
 exit 0;
 
+sub rcs_test { #{{{
+       my ($action, $dir, $topdir, $subdir) = @_;
+
+       my $test="set -e\n";
+       foreach my $rcs_test (
+                       sort {
+                               length $a <=> length $b 
+                                         ||
+                                      $a cmp $b
+                       } grep { /_test$/ } keys %{$config{$topdir}{$subdir}}) {
+               my ($rcs)=$rcs_test=~/(.*)_test/;
+               $test="my_$rcs_test() {\n$config{$topdir}{$subdir}{$rcs_test}\n}\n".$test;
+               $test.="if my_$rcs_test; then echo $rcs; fi\n";
+       }
+       $test=$config{$topdir}{$subdir}{lib}."\n".$test
+               if exists $config{$topdir}{$subdir}{lib};
+       
+       print "mr $action: running rcs test >>$test<<\n" if $verbose;
+       my $rcs=`$test`;
+       chomp $rcs;
+       if (! length $rcs) {
+               return undef;
+       }
+       else {
+               return $rcs;
+       }
+} #}}}
+       
+sub findcommand { #{{{
+       my ($action, $dir, $topdir, $subdir) = @_;
+       
+       if (exists $config{$topdir}{$subdir}{$action}) {
+               return $config{$topdir}{$subdir}{$action};
+       }
+
+       my $rcs=rcs_test(@_);
+
+       if (defined $rcs && 
+           exists $config{$topdir}{$subdir}{$rcs."_".$action}) {
+               return $config{$topdir}{$subdir}{$rcs."_".$action};
+       }
+       else {
+               return undef;
+       }
+} #}}}
+
 sub action { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
 
 sub action { #{{{
        my ($action, $dir, $topdir, $subdir) = @_;
 
@@ -527,12 +612,15 @@ sub action { #{{{
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
                        return action("checkout", $dir, $topdir, $subdir);
                }
        }
-       
+
        $ENV{MR_REPO}=$dir;
 
        $ENV{MR_REPO}=$dir;
 
-       if (exists $config{$topdir}{$subdir}{skip}) {
+       my $skiptest=findcommand("skip", $dir, $topdir, $subdir);
+       my $command=findcommand($action, $dir, $topdir, $subdir);
+
+       if (defined $skiptest) {
                my $test="set -e;".$lib.
                my $test="set -e;".$lib.
-                       "my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
+                       "my_action(){ $skiptest\n }; my_action '$action'";
                print "mr $action: running skip test >>$test<<\n" if $verbose;
                my $ret=system($test);
                if ($ret != 0) {
                print "mr $action: running skip test >>$test<<\n" if $verbose;
                my $ret=system($test);
                if ($ret != 0) {
@@ -555,21 +643,30 @@ sub action { #{{{
                print STDERR "mr $action: failed to chdir to $dir: $!\n";
                return FAILED;
        }
                print STDERR "mr $action: failed to chdir to $dir: $!\n";
                return FAILED;
        }
-       elsif (! exists $config{$topdir}{$subdir}{$action}) {
-               print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
-               return SKIPPED;
+       elsif (! defined $command) {
+               my $rcs=rcs_test(@_);
+               if (! defined $rcs) {
+                       print STDERR "mr $action: unknown repository type and no defined $action command for $topdir$subdir\n";
+                       return FAILED;
+               }
+               else {
+                       print STDERR "mr $action: no defined $action command for $rcs repository $topdir$subdir, skipping\n";
+                       return SKIPPED;
+               }
        }
        else {
                if (! $nochdir) {
                        print "mr $action: $topdir$subdir\n";
                }
                else {
        }
        else {
                if (! $nochdir) {
                        print "mr $action: $topdir$subdir\n";
                }
                else {
-                       print "mr $action: $topdir$subdir (in subdir $directory)\n";
+                       my $s=$directory;
+                       $s=~s/^\Q$topdir$subdir\E\/?//;
+                       print "mr $action: $topdir$subdir (in subdir $s)\n";
                }
                }
-               my $command="set -e; ".$lib.
-                       "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ".
+               $command="set -e; ".$lib.
+                       "my_action(){ $command\n }; my_action ".
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
-               print STDERR "mr $action: running >>$command<<\n" if $verbose;
+               print "mr $action: running >>$command<<\n" if $verbose;
                my $ret=system($command);
                if ($ret != 0) {
                        if (($? & 127) == 2) {
                my $ret=system($command);
                if ($ret != 0) {
                        if (($? & 127) == 2) {
@@ -653,7 +750,6 @@ sub mrs { #{{{
                                                        waitpid($active[$i][0], 0);
                                                        print STDOUT $out[$i][0];
                                                        print STDERR $out[$i][1];
                                                        waitpid($active[$i][0], 0);
                                                        print STDOUT $out[$i][0];
                                                        print STDERR $out[$i][1];
-                                                       print "\n";
                                                        record($active[$i][1], $? >> 8);
                                                        splice(@fhs, $i, 1);
                                                        splice(@active, $i, 1);
                                                        record($active[$i][1], $? >> 8);
                                                        splice(@fhs, $i, 1);
                                                        splice(@active, $i, 1);
@@ -674,9 +770,11 @@ sub record { #{{{
 
        if ($ret == OK) {
                push @ok, $dir;
 
        if ($ret == OK) {
                push @ok, $dir;
+               print "\n";
        }
        elsif ($ret == FAILED) {
                push @failed, $dir;
        }
        elsif ($ret == FAILED) {
                push @failed, $dir;
+               print "\n";
        }
        elsif ($ret == SKIPPED) {
                push @skipped, $dir;
        }
        elsif ($ret == SKIPPED) {
                push @skipped, $dir;
@@ -773,6 +871,12 @@ sub loadconfig { #{{{
                                chomp $value;
                        }
 
                                chomp $value;
                        }
 
+                       if ($parameter eq "include") {
+                               print "mr: including output of \"$value\"\n" if $verbose;
+                               unshift @lines, `$value`;
+                               next;
+                       }
+
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
@@ -790,7 +894,12 @@ sub loadconfig { #{{{
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
-                               $knownactions{$parameter}=1;
+                               if ($parameter =~ /.*_(.*)/) {
+                                       $knownactions{$1}=1;
+                               }
+                               else {
+                                       $knownactions{$parameter}=1;
+                               }
                                if ($parameter eq 'chain' &&
                                    length $dir && $section ne "DEFAULT" &&
                                    -e $dir.$section."/.mrconfig") {
                                if ($parameter eq 'chain' &&
                                    length $dir && $section ne "DEFAULT" &&
                                    -e $dir.$section."/.mrconfig") {
@@ -933,11 +1042,17 @@ lib =
                echo "mr: $@" >&2
                exit 1
        }
                echo "mr: $@" >&2
                exit 1
        }
+       warning() {
+               echo "mr (warning): $@" >&2
+       }
+       info() {
+               echo "mr: $@" >&2
+       }
        hours_since() {
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
                fi
        hours_since() {
                if [ -z "$1" ] || [ -z "$2" ]; then
                        error "mr: usage: hours_since action num"
                fi
-               for dir in .git .svn .bzr CVS .hg; do
+               for dir in .git .svn .bzr CVS .hg _darcs; do
                        if [ -e "$MR_REPO/$dir" ]; then
                                flagfile="$MR_REPO/$dir/.mr_last$1"
                                break
                        if [ -e "$MR_REPO/$dir" ]; then
                                flagfile="$MR_REPO/$dir/.mr_last$1"
                                break
@@ -955,123 +1070,98 @@ lib =
                fi
        }
 
                fi
        }
 
-update =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn update "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               if [ -z "$@" ]; then
-                       git pull -t origin master
-               else
-                       git pull "$@"
-               fi
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr merge "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs update "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg pull "$@" && hg update "$@"
-       else
-               error "unknown repo type"
-       fi
-status =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn status "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git status "$@" || true
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr status "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs status "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg status "$@"
-       else
-               error "unknown repo type"
+svn_test = test -d "$MR_REPO"/.svn
+git_test = test -d "$MR_REPO"/.git
+bzr_test = test -d "$MR_REPO"/.bzr
+cvs_test = test -d "$MR_REPO"/CVS
+hg_test  = test -d "$MR_REPO"/.hg
+darcs_test = test -d "$MR_REPO"/_darcs
+git_bare_test =
+       test -d "$MR_REPO"/refs/heads && test -d "$MR_REPO"/refs/tags &&
+       test -d "$MR_REPO"/objects && test -f "$MR_REPO"/config &&
+       test "$(GIT_CONFIG="$MR_REPO"/config git-config --get core.bare)" = true
+
+svn_update = svn update "$@"
+git_update = if [ "$@" ]; then git pull "$@"; else git pull -t origin master; fi
+bzr_update = bzr merge "$@"
+cvs_update = cvs update "$@"
+hg_update  = hg pull "$@" && hg update "$@"
+darcs_update = darcs pull -a "$@"
+
+svn_status = svn status "$@"
+git_status = git status "$@" || true
+bzr_status = bzr status "$@"
+cvs_status = cvs status "$@"
+hg_status  = hg status "$@"
+darcs_status = darcs whatsnew -ls "$@"
+
+svn_commit = svn commit "$@"
+git_commit = git commit -a "$@" && git push --all
+bzr_commit = bzr commit "$@" && bzr push
+cvs_commit = cvs commit "$@"
+hg_commit  = hg commit -m "$@" && hg push
+darcs_commit = darcs commit -a -m "$@" && darcs push -a
+
+svn_diff = svn diff "$@"
+git_diff = git diff "$@"
+bzr_diff = bzr diff "$@"
+cvs_diff = cvs diff "$@"
+hg_diff  = hg diff "$@"
+darcs_diff = darcs diff "$@"
+
+svn_log = svn log "$@"
+git_log = git log "$@"
+bzr_log = bzr log "$@"
+cvs_log = cvs log "$@"
+hg_log  = hg log "$@"
+darcs_log = darcs changes "$@"
+git_bare_log = git log "$@"
+
+svn_register =
+       url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
+       if [ -z "$url" ]; then
+               error "cannot determine svn url"
        fi
        fi
-commit =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn commit "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git commit -a "$@" && git push --all
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr commit "$@" && bzr push
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs commit "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg commit -m "$@" && hg push
-       else
-               error "unknown repo type"
+       echo "Registering svn url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="svn co '$url' '$MR_REPO'"
+git_register = 
+       url="$(LANG=C git-config --get remote.origin.url)" || true
+       if [ -z "$url" ]; then
+               error "cannot determine git url"
        fi
        fi
-diff =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn diff "$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git diff "$@"
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr diff "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs diff "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg diff "$@"
-       else
-               error "unknown repo type"
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone '$url' '$MR_REPO'"
+bzr_register =
+       url=$(cat .bzr/branch/parent)
+       if [ -z "$url" ]; then
+               error "cannot determine bzr url"
        fi
        fi
-log =
-       if [ -d "$MR_REPO"/.svn ]; then
-               svn log"$@"
-       elif [ -d "$MR_REPO"/.git ]; then
-               git log "$@"
-       elif [ -d "$MR_REPO"/.bzr ]; then
-               bzr log "$@"
-       elif [ -d "$MR_REPO"/CVS ]; then
-               cvs log "$@"
-       elif [ -d "$MR_REPO"/.hg ]; then
-               hg log "$@"
-       else
-               error "unknown repo type"
-       fi
-register =
-       if [ -n "$1" ]; then
-               cd "$1"
-       fi
-       basedir="$(basename $(pwd))"
-       if [ -d .svn ]; then
-               url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
-               if [ -z "$url" ]; then
-                       error "cannot determine svn url"
-               fi
-               echo "Registering svn url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="svn co $url $basedir"
-       elif [ -d .git ]; then
-               url=$(LANG=C git-config --get remote.origin.url)
-               if [ -z "$url" ]; then
-                       error "cannot determine git url"
-               fi
-               echo "Registering git url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="git clone $url $basedir"
-       elif [ -d .bzr ]; then
-               url=$(cat .bzr/branch/parent)
-               if [ -z "$url" ]; then
-                       error "cannot determine bzr url"
+       echo "Registering bzr url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="bzr clone '$url' '$MR_REPO'"
+cvs_register =
+       repo=$(cat CVS/Repository)
+       root=$(cat CVS/Root)
+       if [ -z "$root" ]; then
+               error "cannot determine cvs root"
                fi
                fi
-               echo "Registering bzr url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" checkout="bzr clone $url $basedir"
-       elif [ -d CVS ]; then
-               repo=$(cat CVS/Repository)
-               root=$(cat CVS/Root)
-               if [ -z "$root" ]; then
-                       error "cannot determine cvs root"
-               fi
-               echo "Registering cvs repository $repo at root $root"
-               mr -c "$MR_CONFIG" config "$(pwd)" \
-                       checkout="cvs -d '$root' co -d $basedir $repo"
-       elif [ -d .hg ]; then
-               url=$(hg showconfig paths.default)
-               echo "Registering mercurial repo url: $url in $MR_CONFIG"
-               mr -c "$MR_CONFIG" config "$(pwd)" \
-                       checkout="hg clone $url $basedir"
-       else
-               error "unable to register this repo type"
+       echo "Registering cvs repository $repo at root $root"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="cvs -d '$root' co -d '$MR_REPO' '$repo'"
+hg_register = 
+       url=$(hg showconfig paths.default)
+       echo "Registering mercurial repo url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="hg clone '$url' '$MR_REPO'"
+darcs_register = 
+       url=$(cat _darcs/prefs/defaultrepo)
+       echo "Registering darcs repository $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="darcs get '$url'p '$MR_REPO'"
+git_bare_register = 
+       url="$(LANG=C GIT_CONFIG=config git-config --get remote.origin.url)" || true
+       if [ -z "$url" ]; then
+               error "cannot determine git url"
        fi
        fi
+       echo "Registering git url: $url in $MR_CONFIG"
+       mr -c "$MR_CONFIG" config "`pwd`" checkout="git clone --bare '$url' '$MR_REPO'"
+
 help =
        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
 help =
        if [ ! -e "$MR_PATH" ]; then
                error "cannot find program path"
@@ -1084,3 +1174,5 @@ ed = echo "A horse is a horse, of course, of course.."
 T = echo "I pity the fool."
 right = echo "Not found."
 #}}}
 T = echo "I pity the fool."
 right = echo "Not found."
 #}}}
+
+# vim:sw=8:sts=0:ts=8:noet
hacking on myrepos

Legalese

All content available in this repository is copyright © martin f. krafft, unless otherwise noted.

All files and their content are released under the terms of the Artistic Licence 2.0, unless otherwise noted.

The operator of this repository shall not be held liable for offending content in pages linking to or linked from these page, nor does he endorse their content unless stated otherwise.