]>
git.madduck.net Git - code/myrepos.git/blobdiff - mr
madduck's git repository
Every one of the projects in this repository is available at the canonical
URL git://git.madduck.net/madduck/pub/<projectpath> — see
each project's metadata for the exact URL.
All patches and comments are welcome. Please squash your changes to logical
commits before using git-format-patch and git-send-email to
patches@ git. madduck. net .
If you'd read over the Git project's submission guidelines and adhered to them,
I'd be especially grateful.
SSH access, as well as push access can be individually
arranged .
If you use my repositories frequently, consider adding the following
snippet to ~/.gitconfig and using the third clone URL listed for each
project:
[url "git://git.madduck.net/madduck/"]
insteadOf = madduck:
supports any combination of subversion, git, cvs, and bzr repositories,
and support for other revision control systems can easily be added.
supports any combination of subversion, git, cvs, and bzr repositories,
and support for other revision control systems can easily be added.
-B<mr> cds into and operates on all registered repsitories at or below your
+B<mr> cds into and operates on all registered repo sitories at or below your
working directory. Or, if you are in a subdirectory of a repository that
contains no other registered repositories, it will stay in that directory,
and work on only that repository,
working directory. Or, if you are in a subdirectory of a repository that
contains no other registered repositories, it will stay in that directory,
and work on only that repository,
=item register
Register an existing repository in the mrconfig file. By default, the
=item register
Register an existing repository in the mrconfig file. By default, the
-epository in the current directory is registered, or you can specify a
+r epository in the current directory is registered, or you can specify a
+By default it registers it to the ~/.mrconfig file. To make it write to a
+different file, use the -c option.
+
=item config
Adds, modifies, removes, or prints a value from the mrconfig file. The next
=item config
Adds, modifies, removes, or prints a value from the mrconfig file. The next
+=item -s
+
+Expand the statistics line displayed at the end to include information
+about exactly which repositories failed and were skipped, if any.
+
+=item -n
+
+Just operate on the repository for the current directory, do not
+recurse into deeper repositories.
+
directory, since the repository isn't checked out yet. All other commands
are run inside the repository, though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the
directory, since the repository isn't checked out yet. All other commands
are run inside the repository, though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the
+repository, and "MR_CONFIG" is set to the topmost .mrconfig file used .
A few parameters have special meanings:
A few parameters have special meanings:
-If the "skip" parameter is set and its command returns nonzero , then B<mr>
+If the "skip" parameter is set and its command returns true , then B<mr>
will skip acting on that repository. The command is passed the action
name in $1.
will skip acting on that repository. The command is passed the action
name in $1.
-If the "chain" parameter is set and its command returns nonzero , then B<mr>
+If the "chain" parameter is set and its command returns true , then B<mr>
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
=item deleted
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
=item deleted
-If the "deleted" parameter is set and its command returns nonzero , then
+If the "deleted" parameter is set and its command returns true , then
B<mr> will treat the repository as deleted. It won't ever actually delete
B<mr> will treat the repository as deleted. It won't ever actually delete
-the repository, but it will warn if it sees the repso itory's directory.
+the repository, but it will warn if it sees the repos itory's directory.
This is useful when one mrconfig file is shared amoung multiple machines,
to keep track of and remember to delete old repositories.
This is useful when one mrconfig file is shared amoung multiple machines,
to keep track of and remember to delete old repositories.
use Getopt::Long;
use Cwd qw(getcwd abs_path);
use Getopt::Long;
use Cwd qw(getcwd abs_path);
+$SIG{INT}=sub {
+ print STDERR "mr: interrupted\n";
+ exit 2;
+};
+
+$ENV{MR_CONFIG}="$ENV{HOME}/.mrconfig";
-my $config="$ENV{HOME}/.mrconfig";
+my $stats=0;
+my $no_recurse=0;
my %config;
my %knownactions;
my %alias;
my %config;
my %knownactions;
my %alias;
Getopt::Long::Configure("no_permute");
my $result=GetOptions(
"d|directory=s" => sub { $directory=abs_path($_[1]) },
Getopt::Long::Configure("no_permute");
my $result=GetOptions(
"d|directory=s" => sub { $directory=abs_path($_[1]) },
- "c|config=s" => \$config,
- "verbose" => \$verbose,
+ "c|config=s" => sub { $ENV{MR_CONFIG}=abs_path($_[1]) },
+ "v|verbose" => \$verbose,
+ "s|stats" => \$stats,
+ "n|no-recurse" => \$no_recurse,
);
if (! $result || @ARGV < 1) {
die("Usage: mr [-d directory] action [params ...]\n".
);
if (! $result || @ARGV < 1) {
die("Usage: mr [-d directory] action [params ...]\n".
+loadconfig($ENV{MR_CONFIG} );
#use Data::Dumper;
#print Dumper(\%config);
#use Data::Dumper;
#print Dumper(\%config);
}
my $section=shift;
if ($section=~/^\//) {
}
my $section=shift;
if ($section=~/^\//) {
- # try to convert to a path relative to $config's dir
- my ($dir)=$config =~/^(.*\/)[^\/]+$/;
+ # try to convert to a path relative to the config file
+ my ($dir)=$ENV{MR_CONFIG} =~/^(.*\/)[^\/]+$/;
if ($section=~/^\Q$dir\E(.*)/) {
$section=$1;
}
if ($section=~/^\Q$dir\E(.*)/) {
$section=$1;
}
- modifyconfig($config , $section, %changefields) if %changefields;
+ modifyconfig($ENV{MR_CONFIG} , $section, %changefields) if %changefields;
exit 0;
}
elsif ($action eq 'register') {
exit 0;
}
elsif ($action eq 'register') {
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
my $d=$directory;
$dir.="/" unless $dir=~/\/$/;
$d.="/" unless $d=~/\/$/;
- next if $dir ne $directory && $dir !~ /^\Q$directory\E/;
+ next if $no_recurse && $d ne $dir;
+ next if $dir ne $d && $dir !~ /^\Q$d\E/;
push @repos, [$dir, $topdir, $subdir];
}
}
push @repos, [$dir, $topdir, $subdir];
}
}
$config{$topdir}{$subdir}{lib}."\n" : "";
if (exists $config{$topdir}{$subdir}{deleted}) {
$config{$topdir}{$subdir}{lib}."\n" : "";
if (exists $config{$topdir}{$subdir}{deleted}) {
- if (! -d $dir) {
- return;
+ my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
+ print "mr $action: running deleted test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: deleted test received signal ".($? & 127)."\n";
+ }
- else {
- my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
- print "mr $action: running deleted test >>$test<<\n" if $verbose;
- my $ret=system($test);
- if ($ret >> 8 == 0) {
+ if ($ret >> 8 == 0) {
+ if (-d $dir) {
print STDERR "mr error: $dir should be deleted yet still exists\n\n";
push @failed, $dir;
return;
}
print STDERR "mr error: $dir should be deleted yet still exists\n\n";
push @failed, $dir;
return;
}
+ else {
+ print "mr $action: $dir skipped (as deleted) per config file\n" if $verbose;
+ push @skipped, $dir;
+ return;
+ }
push @skipped, $dir;
return;
}
push @skipped, $dir;
return;
}
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
+
+ if (! -d $dir) {
+ print "mr $action: creating parent directory $dir\n" if $verbose;
+ my $ret=system("mkdir", "-p", $dir);
+ }
}
elsif ($action eq 'update') {
if (! -d $dir) {
}
elsif ($action eq 'update') {
if (! -d $dir) {
"my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
print "mr $action: running skip test >>$test<<\n" if $verbose;
my $ret=system($test);
"my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
print "mr $action: running skip test >>$test<<\n" if $verbose;
my $ret=system($test);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: skip test received signal ".($? & 127)."\n";
+ exit 1;
+ }
+ }
if ($ret >> 8 == 0) {
print "mr $action: $dir skipped per config file\n" if $verbose;
push @skipped, $dir;
if ($ret >> 8 == 0) {
print "mr $action: $dir skipped per config file\n" if $verbose;
push @skipped, $dir;
print STDERR "mr $action: running >>$command<<\n" if $verbose;
my $ret=system($command);
if ($ret != 0) {
print STDERR "mr $action: running >>$command<<\n" if $verbose;
my $ret=system($command);
if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: received signal ".($? & 127)."\n";
+ }
print STDERR "mr $action: failed ($ret)\n" if $verbose;
push @failed, $dir;
if ($ret >> 8 != 0) {
print STDERR "mr $action: failed ($ret)\n" if $verbose;
push @failed, $dir;
if ($ret >> 8 != 0) {
+ if ($action eq 'checkout' && ! -d $dir) {
+ print STDERR "mr $action: $dir missing after checkout\n";;
+ push @failed, $dir;
+ return;
+ }
+
showstat($#failed+1, "failed", "failed"),
showstat($#skipped+1, "skipped", "skipped"),
).")\n";
showstat($#failed+1, "failed", "failed"),
showstat($#skipped+1, "skipped", "skipped"),
).")\n";
+if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+ }
+ if (@failed) {
+ print STDERR "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+}
# copy in defaults from first parent
my $parent=$dir;
# copy in defaults from first parent
my $parent=$dir;
- while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
+ while ($parent=~s/^(.*\/)[^\/]+\/?$/$1/) {
+ if ($parent eq '/') {
+ $parent="";
+ }
if (exists $config{$parent} &&
exists $config{$parent}{DEFAULT}) {
$config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };
if (exists $config{$parent} &&
exists $config{$parent}{DEFAULT}) {
$config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };
$knownactions{$parameter}=1;
if ($parameter eq 'chain' &&
length $dir && $section ne "DEFAULT" &&
$knownactions{$parameter}=1;
if ($parameter eq 'chain' &&
length $dir && $section ne "DEFAULT" &&
- -e $dir.$section."/.mrconfig" &&
- system($value) >> 8 == 0) {
- push @toload, $dir.$section."/.mrconfig";
+ -e $dir.$section."/.mrconfig") {
+ my $ret=system($value);
+ if ($ret != 0) {
+ if (($? & 127) == 2) {
+ print STDERR "mr $action: chain test interrupted\n";
+ exit 2;
+ }
+ elsif ($? & 127) {
+ print STDERR "mr $action: chain test received signal ".($? & 127)."\n";
+ }
+ }
+ else {
+ push @toload, $dir.$section."/.mrconfig";
+ }
error "cannot determine svn url"
fi
echo "Registering svn url: $url"
error "cannot determine svn url"
fi
echo "Registering svn url: $url"
- mr config "$(pwd)" checkout="svn co $url $basedir"
+ mr -c "$MR_CONFIG" config "$(pwd)" checkout="svn co $url $basedir"
elif [ -d .git ]; then
url=$(LANG=C git-config --get remote.origin.url)
if [ -z "$url" ]; then
error "cannot determine git url"
fi
echo "Registering git url: $url"
elif [ -d .git ]; then
url=$(LANG=C git-config --get remote.origin.url)
if [ -z "$url" ]; then
error "cannot determine git url"
fi
echo "Registering git url: $url"
- mr config "$(pwd)" checkout="git clone $url $basedir"
+ mr -c "$MR_CONFIG" config "$(pwd)" checkout="git clone $url $basedir"
elif [ -d .bzr ]; then
url=$(cat .bzr/branch/parent)
if [ -z "$url" ]; then
error "cannot determine bzr url"
fi
echo "Registering bzr url: $url"
elif [ -d .bzr ]; then
url=$(cat .bzr/branch/parent)
if [ -z "$url" ]; then
error "cannot determine bzr url"
fi
echo "Registering bzr url: $url"
- mr config "$(pwd)" checkout="bzr clone $url $basedir"
+ mr -c "$MR_CONFIG" config "$(pwd)" checkout="bzr clone $url $basedir"
+ elif [ -d CVS ]; then
+ repo=$(cat CVS/Repository)
+ root=$(cat CVS/Root)
+ if [ -z "$root" ]; then
+ error "cannot determine cvs root"
+ fi
+ echo "Registering cvs repository $repo at root $root"
+ mr -c "$MR_CONFIG" config "$(pwd)" \
+ checkout="cvs -d '$root' co -d $basedir $repo"
else
error "unable to register this repo type"
fi
else
error "unable to register this repo type"
fi
projects / code / myrepos.git / blobdiff