B<mr> [options] commit [-m "message"]
+B<mr> [options] diff
+
B<mr> [options] action [params ...]
=head1 DESCRIPTION
=over 4
-=item checkout
+=item checkout (or co)
Checks out all the registered repositories that are not already checked
out.
Displays a status report for each registered repository, showing what
uncommitted changes are present in the repository.
-=item commit
+=item commit (or ci)
Commits changes to each registered repository. (By default, changes
are pushed to the remote repository too, when using distributed systems
The optional -m parameter allows specifying a commit message.
+=item diff
+
+Show a diff of uncommitted changes.
+
+=item help
+
+Displays this help.
+
=back
Actions can be abbreviated to any unambiguous subsctring, so
=head1 FILES
-B<mr> is configured by .mrconfig files. It searches for .mrconfig files in
-your home directory, and in the root directory of each repository specified
-in a .mrconfig file. So you could have a ~/.mrconfig that registers a
+B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
+file in your home directory. Each repository specified in a .mrconfig file
+can also have its own .mrconfig file in its root directory that can
+optionally be used as well. So you could have a ~/.mrconfig that registers a
repository ~/src, that itself contains a ~/src/.mrconfig file, that in turn
registers several additional repositories.
a command, except for the "checkout" command, which is run in the parent
of the repository directory, since the repository isn't checked out yet.
-There are two special parameters. If the "skip" parameter is set and
+There are three special parameters. If the "skip" parameter is set and
its command returns nonzero, then B<mr> will skip acting on that repository.
+If the "chain" parameter is set and its command returns nonzero, then B<mr>
+will try to load a .mrconfig file from the root of the repository. (You
+should avoid chaining from repositories with untrusted committers.) The
+"lib" parameter can specify some shell code that will be run before each
+command, this can be a useful way to define shell functions other commands
+can use.
The "default" section allows setting up default handlers for each action,
and is overridden by the contents of other sections. mr contains default
handlers for the "update", "status", and "commit" actions, so normally
you only need to specify what to do for "checkout".
+The "alias" section allows adding aliases for commands. Each parameter
+is an alias, and its value is the command to run.
+
For example:
[src]
checkout = svn co svn://svn.example.com/src/trunk src
+ chain = true
[src/linux-2.6]
- # only check this out on kodama
- skip = test $(hostname) != kodama
+ skip = small
checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ [default]
+ lib = \
+ small() {
+ case "$(hostname)" in; \
+ slug|snail); \
+ return 0; ;; ; \
+ esac; \
+ return 1; \
+ }
+
=head1 AUTHOR
Copyright 2007 Joey Hess <joey@kitenet.net>
my $verbose=0;
my %config;
my %knownactions;
+my %alias;
Getopt::Long::Configure("no_permute");
my $result=GetOptions(
"v" => \$verbose,
);
if (! $result || @ARGV < 1) {
- die("Usage: mr [-d directory] action [params ...]\n");
+ die("Usage: mr [-d directory] action [params ...]\n".
+ "(Use mr help for man page.)\n");
+
}
loadconfig(\*DATA);
#use Data::Dumper;
#print Dumper(\%config);
+eval {
+ use FindBin qw($Bin $Script);
+ $ENV{MR_PATH}=$Bin."/".$Script;
+};
+
+# alias expansion and command stemming
my $action=shift @ARGV;
-if (! $knownactions{$action}) {
- my @matches = grep { /^\Q$action\E/ } keys %knownactions;
- if (@matches == 1) {
- $action=$matches[0];
+if (! exists $knownactions{$action}) {
+ if (exists $alias{$action}) {
+ $action=$alias{$action};
}
else {
- die "mr: ambiguous action \"$action\" (matches @matches)\n";
+ my @matches = grep { /^\Q$action\E/ }
+ keys %knownactions, keys %alias;
+ if (@matches == 1) {
+ $action=$matches[0];
+ }
+ else {
+ die "mr: ambiguous action \"$action\" (matches @matches)\n";
+ }
+ }
+}
+
+if ($action eq 'help') {
+ exec($config{''}{default}{help});
+}
+
+# handle being in a subdir of a repository
+foreach my $topdir (sort keys %config) {
+ foreach my $subdir (sort keys %{$config{$topdir}}) {
+ if ($directory =~ /^\Q$topdir$subdir\E\//) {
+ $directory=$topdir.$subdir;
+ }
}
}
if (defined $directory &&
$dir ne $directory &&
$dir !~ /^\Q$directory\E\//) {
- print "mr $action: $dir skipped per -d parameter ($directory)\n" if $verbose;
- push @skipped, $dir;
next;
}
- print "\n" unless $first;
- $first=0;
-
- if (exists $config{$topdir}{$subdir}{skip}) {
- my $ret=system($config{$topdir}{$subdir}{skip});
- if ($ret >> 8 == 0) {
- print "mr $action: $dir skipped per config file\n" if $verbose;
- push @skipped, $dir;
- next;
- }
- }
-
action($action, $dir, $topdir, $subdir);
-
}
}
sub action {
my ($action, $dir, $topdir, $subdir) = @_;
+
+ my $lib= exists $config{$topdir}{$subdir}{lib} ?
+ $config{$topdir}{$subdir}{lib} : "";
if ($action eq 'checkout') {
if (-d $dir) {
- print "mr $action: $dir already exists, skipping checkout\n";
+ print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
push @skipped, $dir;
- next;
+ return;
}
$dir=~s/^(.*)\/[^\/]+\/?$/$1/;
}
- if ($action eq 'update') {
+ elsif ($action eq 'update') {
if (! -d $dir) {
return action("checkout", $dir, $topdir, $subdir);
}
}
-
+
if (! chdir($dir)) {
print STDERR "mr $action: failed to chdir to $dir: $!\n";
push @skipped, $dir;
}
- elsif (! exists $config{$topdir}{$subdir}{$action}) {
+
+ if (exists $config{$topdir}{$subdir}{skip}) {
+ my $ret=system($lib.$config{$topdir}{$subdir}{skip});
+ if ($ret >> 8 == 0) {
+ print "mr $action: $dir skipped per config file\n" if $verbose;
+ push @skipped, $dir;
+ return;
+ }
+ }
+
+ if (! exists $config{$topdir}{$subdir}{$action}) {
print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
push @skipped, $dir;
}
else {
print "mr $action: in $dir\n";
- my $command="set -e; my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action @ARGV";
+ my $command="set -e; ".$lib.
+ "my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
my $ret=system($command);
if ($ret != 0) {
print STDERR "mr $action: failed to run: $command\n" if $verbose;
else {
push @successful, $dir;
}
+
+ print "\n" unless $first;
+ $first=0;
}
}
}
return;
}
-print "\nmr $action: finished (".join("; ",
+print "\n" unless $first;
+print "mr $action: finished (".join("; ",
showstat($#successful+1, "successful", "successful"),
showstat($#failed+1, "failed", "failed"),
showstat($#skipped+1, "skipped", "skipped"),
).")\n";
-exit @failed ? 1 : 0;
+if (@failed) {
+ exit 1;
+}
+elsif (! @successful && @skipped) {
+ exit 1;
+}
+exit 0;
my %loaded;
sub loadconfig {
next if /^\s*\#/ || /^\s*$/;
if (/^\s*\[([^\]]*)\]\s*$/) {
$section=$1;
- if (length $dir && $section ne "default" &&
- -e $dir.$section."/.mrconfig") {
- push @toload, $dir.$section."/.mrconfig";
- }
}
elsif (/^\s*(\w+)\s*=\s*(.*)/) {
my $parameter=$1;
if (! defined $section) {
die "$f line $.: parameter ($parameter) not in section\n";
}
- if (! exists $config{$dir}{$section} &&
- exists $config{$dir}{default}) {
+ if ($section ne 'alias' &&
+ ! exists $config{$dir}{$section} &&
+ exists $config{$dir}{default}) {
# copy in defaults
$config{$dir}{$section}={ %{$config{$dir}{default}} };
}
- $config{$dir}{$section}{$parameter}=$value;
- $knownactions{$parameter}=1;
+ if ($section eq 'alias') {
+ $alias{$parameter}=$value;
+ }
+ elsif ($parameter eq 'lib') {
+ $config{$dir}{$section}{lib}.=$value." ; ";
+ }
+ else {
+ $config{$dir}{$section}{$parameter}=$value;
+ $knownactions{$parameter}=1;
+ if ($parameter eq 'chain' &&
+ length $dir && $section ne "default" &&
+ -e $dir.$section."/.mrconfig" &&
+ system($value) >> 8 == 0) {
+ push @toload, $dir.$section."/.mrconfig";
+ }
+ }
}
else {
- die "$f line $.: parse error\n";
+ die "$f line $.: parse error\n";
}
}
close $in;
}
}
-__DATA__
-# Some useful actions that mr knows about by default.
+# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
+__DATA__
+[alias]
+ co = checkout
+ ci = commit
[default]
+lib = \
+ error() { \
+ echo "mr: $@" >&2; \
+ exit 1; \
+ }
update = \
if [ -d .svn ]; then \
- svn update; \
+ svn update "$@"; \
elif [ -d .git ]; then \
- git pull origin master; \
+ git pull origin master "$@"; \
else \
- echo "mr update: unknown repo type"; \
- exit 1; \
+ error "unknown repo type"; \
fi
status = \
if [ -d .svn ]; then \
- svn status; \
+ svn status "$@"; \
elif [ -d .git ]; then \
- git status || true; \
+ git status "$@" || true; \
else \
- echo "mr status: unknown repo type"; \
- exit 1; \
+ error "unknown repo type"; \
fi
commit = \
if [ -d .svn ]; then \
svn commit "$@"; \
elif [ -d .git ]; then \
- echo "foo: $@" \
- git commit -a "$@" \
+ git commit -a "$@" && git push --all; \
else \
- echo "mr commit: unknown repo type"; \
- exit 1; \
+ error "unknown repo type"; \
+ fi
+diff = \
+ if [ -d .svn ]; then \
+ svn diff "$@"; \
+ elif [ -d .git ]; then \
+ git diff "$@"; \
+ else \
+ error "unknown repo type"; \
fi
+help = \
+ if [ ! -e "$MR_PATH" ]; then \
+ error "cannot find program path";\
+ fi; \
+ (pod2man -c mr "$MR_PATH" | man -l -) || \
+ error "pod2man or man failed"
projects / code / myrepos.git / blobdiff