#!/usr/bin/perl
+#man{{{
+
=head1 NAME
mr - a Multiple Repository management tool
B<mr> [options] log
+B<mr> [options] register [repository]
+
+B<mr> [options] config section [parameter=[value] ...]
+
B<mr> [options] action [params ...]
=head1 DESCRIPTION
-B<mr> is a Multiple Repository management tool. It allows you to register a
-set of repositories in a .mrconfig file, and then checkout, update, or
-perform other actions on the repositories as if they were one big
-respository.
-
-Any mix of revision control systems can be used with B<mr>, and you can
-define arbitrary actions for commands like "update", "checkout", or "commit".
+B<mr> is a Multiple Repository management tool. It
+can checkout, update, or perform other actions on
+a set of repositories as if they were one combined respository. It
+supports any combination of subversion, git, cvs, and bzr repositories,
+and support for other revision control systems can easily be added.
B<mr> cds into and operates on all registered repsitories at or below your
working directory. Or, if you are in a subdirectory of a repository that
contains no other registered repositories, it will stay in that directory,
and work on only that repository,
-The predefined commands should be fairly familiar to users of any revision
+These predefined commands should be fairly familiar to users of any revision
control system:
=over 4
Show the commit log.
+=back
+
+These commands are also available:
+
+=over 4
+
=item list (or ls)
List the repositories that mr will act on.
+=item register
+
+Register an existing repository in the mrconfig file. By default, the
+epository in the current directory is registered, or you can specify a
+directory to register.
+
+=item config
+
+Adds, modifies, removes, or prints a value from the mrconfig file. The next
+parameter is the name of the section the value is in. To add or modify
+values, use one or more instances of "parameter=value". Use "parameter=" to
+remove a parameter. Use just "parameter" to get the value of a parameter.
+
+For example, to add (or edit) a repository in src/foo:
+
+ mr config src/foo checkout="svn co svn://example.com/foo/trunk foo"
+
+To show the command that mr uses to update the repository in src/foo:
+
+ mr config src/foo update
+
=item help
Displays this help.
"mr st" is equivilant to "mr status", and "mr up" is equivilant to "mr
update"
-Additional parameters can be passed to other commands than "commit", they
-will be passed on unchanged to the underlying revision control system.
-This is mostly useful if the repositories mr will act on all use the same
-revision control system.
+Additional parameters can be passed to most commands, and are passed on
+unchanged to the underlying revision control system. This is mostly useful
+if the repositories mr will act on all use the same revision control
+system.
=head1 OPTIONS
Be verbose.
+=item -s
+
+Expand the statistics line displayed at the end to include information
+about exactly which repositories failed and were skipped, if any.
+
=back
=head1 FILES
chain = true
[src/linux-2.6]
- checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git &&
+ cd linux-2.6 &&
+ git checkout -b mybranch origin/master
The .mrconfig file uses a variant of the INI file format. Lines starting with
-"#" are comments. Lines ending with "\" are continued on to the next line.
+"#" are comments. Values can be continued to the following line by
+indenting the line with whitespace.
The "DEFAULT" section allows setting default values for the sections that
come after it.
=item skip
If the "skip" parameter is set and its command returns nonzero, then B<mr>
-will skip acting on that repository.
+will skip acting on that repository. The command is passed the action
+name in $1.
+
+Here are two examples. The first skips the repo unless
+mr is run by joey. The second uses the hours_since function
+(included in mr's built-in library) to skip updating the repo unless it's
+been at least 12 hours since the last update.
+
+ skip = test $(whoami) != joey
+ skip = [ "$1" = update ] && [ $(hours_since "$1") -lt 12 ]
=item chain
will try to load a .mrconfig file from the root of the repository. (You
should avoid chaining from repositories with untrusted committers.)
+=item deleted
+
+If the "deleted" parameter is set and its command returns nonzero, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repsoitory's directory.
+This is useful when one mrconfig file is shared amoung multiple machines,
+to keep track of and remember to delete old repositories.
+
=item lib
The "lib" parameter can specify some shell code that will be run before each
=cut
+#}}}
+
use warnings;
use strict;
use Getopt::Long;
my $directory=getcwd();
my $config="$ENV{HOME}/.mrconfig";
my $verbose=0;
+my $stats=0;
my %config;
my %knownactions;
my %alias;
my $result=GetOptions(
"d|directory=s" => sub { $directory=abs_path($_[1]) },
"c|config=s" => \$config,
- "verbose" => \$verbose,
+ "v|verbose" => \$verbose,
+ "s|stats" => \$stats,
);
if (! $result || @ARGV < 1) {
die("Usage: mr [-d directory] action [params ...]\n".
}
if ($action eq 'help') {
- exec($config{''}{DEFAULT}{help});
+ exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
+}
+elsif ($action eq 'config') {
+ if (@ARGV < 2) {
+ die "mr config: not enough parameters\n";
+ }
+ my $section=shift;
+ if ($section=~/^\//) {
+ # try to convert to a path relative to $config's dir
+ my ($dir)=$config=~/^(.*\/)[^\/]+$/;
+ if ($section=~/^\Q$dir\E(.*)/) {
+ $section=$1;
+ }
+ }
+ my %changefields;
+ foreach (@ARGV) {
+ if (/^([^=]+)=(.*)$/) {
+ $changefields{$1}=$2;
+ }
+ else {
+ my $found=0;
+ foreach my $topdir (sort keys %config) {
+ if (exists $config{$topdir}{$section} &&
+ exists $config{$topdir}{$section}{$_}) {
+ print $config{$topdir}{$section}{$_}."\n";
+ $found=1;
+ }
+ }
+ if (! $found) {
+ die "mr $action: $section $_ not set\n";
+ }
+ }
+ }
+ modifyconfig($config, $section, %changefields) if %changefields;
+ exit 0;
+}
+elsif ($action eq 'register') {
+ my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
+ "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
+ join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+ print STDERR "mr $action: running >>$command<<\n" if $verbose;
+ exec($command) || die "exec: $!";
}
# work out what repos to act on
$nochdir=1;
}
-my (@failed, @successful, @skipped);
+my (@failed, @ok, @skipped);
foreach my $repo (@repos) {
action($action, @$repo);
}
-sub action {
+sub action { #{{{
my ($action, $dir, $topdir, $subdir) = @_;
my $lib= exists $config{$topdir}{$subdir}{lib} ?
$config{$topdir}{$subdir}{lib}."\n" : "";
+ if (exists $config{$topdir}{$subdir}{deleted}) {
+ if (! -d $dir) {
+ return;
+ }
+ else {
+ my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
+ print "mr $action: running deleted test >>$test<<\n" if $verbose;
+ my $ret=system($test);
+ if ($ret >> 8 == 0) {
+ print STDERR "mr error: $dir should be deleted yet still exists\n\n";
+ push @failed, $dir;
+ return;
+ }
+ }
+ }
+
if ($action eq 'checkout') {
if (-d $dir) {
print "mr $action: $dir already exists, skipping checkout\n" if $verbose;
$ENV{MR_REPO}=$dir;
if (exists $config{$topdir}{$subdir}{skip}) {
- my $test="set -e;".$lib.$config{$topdir}{$subdir}{skip};
+ my $test="set -e;".$lib.
+ "my_action(){ $config{$topdir}{$subdir}{skip}\n }; my_action '$action'";
print "mr $action: running skip test >>$test<<\n" if $verbose;
my $ret=system($test);
if ($ret >> 8 == 0) {
}
}
else {
- push @successful, $dir;
+ push @ok, $dir;
}
print "\n";
}
-}
+} #}}}
-sub showstat {
+sub showstat { #{{{
my $count=shift;
my $singular=shift;
my $plural=shift;
return "$count ".($count > 1 ? $plural : $singular);
}
return;
-}
-if (! @successful && ! @failed && ! @skipped) {
+} #}}}
+if (! @ok && ! @failed && ! @skipped) {
die "mr $action: no repositories found to work on\n";
}
print "mr $action: finished (".join("; ",
- showstat($#successful+1, "successful", "successful"),
+ showstat($#ok+1, "ok", "ok"),
showstat($#failed+1, "failed", "failed"),
showstat($#skipped+1, "skipped", "skipped"),
).")\n";
+if ($stats) {
+ if (@skipped) {
+ print "mr $action: (skipped: ".join(" ", @skipped).")\n";
+ }
+ if (@failed) {
+ print "mr $action: (failed: ".join(" ", @failed).")\n";
+ }
+}
if (@failed) {
exit 1;
}
-elsif (! @successful && @skipped) {
+elsif (! @ok && @skipped) {
exit 1;
}
exit 0;
my %loaded;
-sub loadconfig {
+sub loadconfig { #{{{
my $f=shift;
my @toload;
my $in;
my $dir;
if (ref $f eq 'GLOB') {
- $in=$f;
$dir="";
+ $in=$f;
}
else {
- # $f might be a symlink
+ if (! -e $f) {
+ return;
+ }
+
my $absf=abs_path($f);
if ($loaded{$absf}) {
return;
}
$loaded{$absf}=1;
- print "mr: loading config $f\n" if $verbose;
- open($in, "<", $f) || die "mr: open $f: $!\n";
($dir)=$f=~/^(.*\/)[^\/]+$/;
if (! defined $dir) {
$dir=".";
# copy in defaults from first parent
my $parent=$dir;
- while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
+ while ($parent=~s/^(.*\/)[^\/]+\/?$/$1/) {
+ if ($parent eq '/') {
+ $parent="";
+ }
if (exists $config{$parent} &&
exists $config{$parent}{DEFAULT}) {
$config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };
last;
}
}
+
+ print "mr: loading config $f\n" if $verbose;
+ open($in, "<", $f) || die "mr: open $f: $!\n";
}
+ my @lines=<$in>;
+ close $in;
my $section;
- while (<$in>) {
+ my $line=0;
+ while (@lines) {
+ $_=shift @lines;
+ $line++;
chomp;
next if /^\s*\#/ || /^\s*$/;
- if (/^\s*\[([^\]]*)\]\s*$/) {
+ if (/^\[([^\]]*)\]\s*$/) {
$section=$1;
}
- elsif (/^\s*(\w+)\s*=\s*(.*)/) {
+ elsif (/^(\w+)\s*=\s*(.*)/) {
my $parameter=$1;
my $value=$2;
- # continuation line
- while ($value=~/(.*)\\$/s) {
- $value=$1."\n".<$in>;
+ # continued value
+ while (@lines && $lines[0]=~/^\s(.+)/) {
+ shift(@lines);
+ $line++;
+ $value.="\n$1";
chomp $value;
}
}
}
else {
- die "$f line $.: parse error\n";
+ die "$f line $line: parse error\n";
}
}
- close $in;
foreach (@toload) {
loadconfig($_);
}
-}
+} #}}}
+
+sub modifyconfig { #{{{
+ my $f=shift;
+ # the section to modify or add
+ my $targetsection=shift;
+ # fields to change in the section
+ # To remove a field, set its value to "".
+ my %changefields=@_;
+
+ my @lines;
+ my @out;
+
+ if (-e $f) {
+ open(my $in, "<", $f) || die "mr: open $f: $!\n";
+ @lines=<$in>;
+ close $in;
+ }
+
+ my $formatfield=sub {
+ my $field=shift;
+ my @value=split(/\n/, shift);
+
+ return "$field = ".shift(@value)."\n".
+ join("", map { "\t$_\n" } @value);
+ };
+ my $addfields=sub {
+ my @blanks;
+ while ($out[$#out] =~ /^\s*$/) {
+ unshift @blanks, pop @out;
+ }
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, "$field = $changefields{$field}\n";
+ delete $changefields{$field};
+ }
+ }
+ push @out, @blanks;
+ };
+
+ my $section;
+ while (@lines) {
+ $_=shift(@lines);
+
+ if (/^\s*\#/ || /^\s*$/) {
+ push @out, $_;
+ }
+ elsif (/^\[([^\]]*)\]\s*$/) {
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+
+ $section=$1;
+
+ push @out, $_;
+ }
+ elsif (/^(\w+)\s*=\s(.*)/) {
+ my $parameter=$1;
+ my $value=$2;
+
+ # continued value
+ while (@lines && $lines[0]=~/^\s(.+)/) {
+ shift(@lines);
+ $value.="\n$1";
+ chomp $value;
+ }
+
+ if ($section eq $targetsection) {
+ if (exists $changefields{$parameter}) {
+ if (length $changefields{$parameter}) {
+ $value=$changefields{$parameter};
+ }
+ delete $changefields{$parameter};
+ }
+ }
+
+ push @out, $formatfield->($parameter, $value);
+ }
+ }
+
+ if (defined $section &&
+ $section eq $targetsection) {
+ $addfields->();
+ }
+ elsif (%changefields) {
+ push @out, "\n[$targetsection]\n";
+ foreach my $field (sort keys %changefields) {
+ if (length $changefields{$field}) {
+ push @out, $formatfield->($field, $changefields{$field});
+ }
+ }
+ }
+
+ open(my $out, ">", $f) || die "mr: write $f: $!\n";
+ print $out @out;
+ close $out;
+} #}}}
# Finally, some useful actions that mr knows about by default.
# These can be overridden in ~/.mrconfig.
+#DATA{{{
__DATA__
[ALIAS]
- co = checkout
- ci = commit
- ls = list
+co = checkout
+ci = commit
+ls = list
[DEFAULT]
-lib = \
- error() { \
- echo "mr: $@" >&2 \
- exit 1 \
+lib =
+ error() {
+ echo "mr: $@" >&2
+ exit 1
+ }
+ hours_since() {
+ for dir in .git .svn .bzr CVS; do
+ if [ -e "$MR_REPO/$dir" ]; then
+ flagfile="$MR_REPO/$dir/.mr_last$1"
+ break
+ fi
+ done
+ if [ -z "$flagfile" ]; then
+ error "cannot determine flag filename"
+ fi
+ perl -wle 'print -f shift() ? int((-M _) * 24) : 9999' "$flagfile"
+ touch "$flagfile"
}
-update = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn update "$@" \
- elif [ -d "$MR_REPO"/.git ]; then \
- git pull origin master "$@" \
- elif [ -d "$MR_REPO"/.bzr ]; then \
- bzr merge "$@" \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs update "$@" \
- else \
- error "unknown repo type" \
+update =
+ if [ -d "$MR_REPO"/.svn ]; then
+ svn update "$@"
+ elif [ -d "$MR_REPO"/.git ]; then
+ git pull origin master "$@"
+ elif [ -d "$MR_REPO"/.bzr ]; then
+ bzr merge "$@"
+ elif [ -d "$MR_REPO"/CVS ]; then
+ cvs update "$@"
+ else
+ error "unknown repo type"
+ fi
+status =
+ if [ -d "$MR_REPO"/.svn ]; then
+ svn status "$@"
+ elif [ -d "$MR_REPO"/.git ]; then
+ git status "$@" || true
+ elif [ -d "$MR_REPO"/.bzr ]; then
+ bzr status "$@"
+ elif [ -d "$MR_REPO"/CVS ]; then
+ cvs status "$@"
+ else
+ error "unknown repo type"
fi
-status = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn status "$@" \
- elif [ -d "$MR_REPO"/.git ]; then \
- git status "$@" || true \
- elif [ -d "$MR_REPO"/.bzr ]; then \
- bzr status "$@" \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs status "$@" \
- else \
- error "unknown repo type" \
+commit =
+ if [ -d "$MR_REPO"/.svn ]; then
+ svn commit "$@"
+ elif [ -d "$MR_REPO"/.git ]; then
+ git commit -a "$@" && git push --all
+ elif [ -d "$MR_REPO"/.bzr ]; then
+ bzr commit "$@" && bzr push
+ elif [ -d "$MR_REPO"/CVS ]; then
+ cvs commit "$@"
+ else
+ error "unknown repo type"
fi
-commit = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn commit "$@" \
- elif [ -d "$MR_REPO"/.git ]; then \
- git commit -a "$@" && git push --all \
- elif [ -d "$MR_REPO"/.bzr ]; then \
- bzr commit "$@" && bzr push \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs commit "$@" \
- else \
- error "unknown repo type" \
+diff =
+ if [ -d "$MR_REPO"/.svn ]; then
+ svn diff "$@"
+ elif [ -d "$MR_REPO"/.git ]; then
+ git diff "$@"
+ elif [ -d "$MR_REPO"/.bzr ]; then
+ bzr diff "$@"
+ elif [ -d "$MR_REPO"/CVS ]; then
+ cvs diff "$@"
+ else
+ error "unknown repo type"
fi
-diff = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn diff "$@" \
- elif [ -d "$MR_REPO"/.git ]; then \
- git diff "$@" \
- elif [ -d "$MR_REPO"/.bzr ]; then \
- bzr diff "$@" \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs diff "$@" \
- else \
- error "unknown repo type" \
+log =
+ if [ -d "$MR_REPO"/.svn ]; then
+ svn log"$@"
+ elif [ -d "$MR_REPO"/.git ]; then
+ git log "$@"
+ elif [ -d "$MR_REPO"/.bzr ]; then
+ bzr log "$@"
+ elif [ -d "$MR_REPO"/CVS ]; then
+ cvs log "$@"
+ else
+ error "unknown repo type"
fi
-log = \
- if [ -d "$MR_REPO"/.svn ]; then \
- svn log"$@" \
- elif [ -d "$MR_REPO"/.git ]; then \
- git log "$@" \
- elif [ -d "$MR_REPO"/.bzr ]; then \
- bzr log "$@" \
- elif [ -d "$MR_REPO"/CVS ]; then \
- cvs log "$@" \
- else \
- error "unknown repo type" \
+register =
+ if [ -n "$1" ]; then
+ cd "$1"
fi
+ basedir="$(basename $(pwd))"
+ if [ -d .svn ]; then
+ url=$(LANG=C svn info . | grep -i ^URL: | cut -d ' ' -f 2)
+ if [ -z "$url" ]; then
+ error "cannot determine svn url"
+ fi
+ echo "Registering svn url: $url"
+ mr config "$(pwd)" checkout="svn co $url $basedir"
+ elif [ -d .git ]; then
+ url=$(LANG=C git-config --get remote.origin.url)
+ if [ -z "$url" ]; then
+ error "cannot determine git url"
+ fi
+ echo "Registering git url: $url"
+ mr config "$(pwd)" checkout="git clone $url $basedir"
+ elif [ -d .bzr ]; then
+ url=$(cat .bzr/branch/parent)
+ if [ -z "$url" ]; then
+ error "cannot determine bzr url"
+ fi
+ echo "Registering bzr url: $url"
+ mr config "$(pwd)" checkout="bzr clone $url $basedir"
+ else
+ error "unable to register this repo type"
+ fi
+help =
+ if [ ! -e "$MR_PATH" ]; then
+ error "cannot find program path"
+ fi
+ (pod2man -c mr "$MR_PATH" | man -l -) || error "pod2man or man failed"
list = true
-
-help = \
- if [ ! -e "$MR_PATH" ]; then \
- error "cannot find program path" \
- fi \
- (pod2man -c mr "$MR_PATH" | man -l -) || \
- error "pod2man or man failed"
+config =
ed = echo "A horse is a horse, of course, of course.."
T = echo "I pity the fool."
+right = echo "Not found."
+#}}}
projects / code / myrepos.git / blobdiff