implemented mr register

[code/myrepos.git] / mr

diff --git a/mr b/mr
index 175c5f1d7c749dd1fd457ebff26d51d29afff02e..c6d74e9cf11daf8e63a5c681d8b648778b7f0bcc 100755 (executable)
--- a/mr
+++ b/mr
@@ -18,6 +18,10 @@ B<mr> [options] diff
 
 B<mr> [options] log
 
 
 B<mr> [options] log
 

+B<mr> [options] register repository
+
+B<mr> [options] config section [parameter=[value] ...]
+

 B<mr> [options] action [params ...]
 
 =head1 DESCRIPTION
 B<mr> [options] action [params ...]
 
 =head1 DESCRIPTION


@@ -74,6 +78,21 @@ Show the commit log.
 
 List the repositories that mr will act on.
 
 
 List the repositories that mr will act on.
 

+=item register
+
+The next parameter is the directory of an existing repository. The
+repository will be registered in the mrconfig file.
+
+=item config
+
+Modifies the mrconfig file. The next parameter is the name of the section
+to add or modify, and it is followed by one or more instances of
+"parameter=value". Use "parameter=" to remove a parameter. 
+
+For example, to register a new svn repository in src/foo:
+
+  mr config src/foo checkout="svn co svn://example.com/foo/trunk"
+

 =item help
 
 Displays this help.
 =item help
 
 Displays this help.


@@ -112,19 +131,38 @@ Be verbose.
 =head1 FILES
 
 B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig
 =head1 FILES
 
 B<mr> is configured by .mrconfig files. It starts by reading the .mrconfig

-file in your home directory. Each repository specified in a .mrconfig file
-can also have its own .mrconfig file in its root directory that can
-optionally be used as well. So you could have a ~/.mrconfig that registers a
-repository ~/src, that itself contains a ~/src/.mrconfig file, that in turn
-registers several additional repositories.
+file in your home directory, and this can in turn chain load .mrconfig files
+from repositories.
+
+Here is an example .mrconfig file:
+
+  [src]
+  checkout = svn co svn://svn.example.com/src/trunk src
+  chain = true
+
+  [src/linux-2.6]
+  checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

 
 The .mrconfig file uses a variant of the INI file format. Lines starting with
 "#" are comments. Lines ending with "\" are continued on to the next line.
 
 The .mrconfig file uses a variant of the INI file format. Lines starting with
 "#" are comments. Lines ending with "\" are continued on to the next line.

-Sections specify where each repository is located, relative to the
-directory that contains the .mrconfig file.
+
+The "DEFAULT" section allows setting default values for the sections that
+come after it.
+
+The "ALIAS" section allows adding aliases for actions. Each parameter
+is an alias, and its value is the action to use.
+
+All other sections add repositories. The section header specifies the
+directory where the repository is located. This is relative to the directory
+that contains the mrconfig file, but you can also choose to use absolute
+paths.

 
 Within a section, each parameter defines a shell command to run to handle a
 
 Within a section, each parameter defines a shell command to run to handle a

-given action. Note that these shell commands are run in a "set -e" shell
+given action. mr contains default handlers for the "update", "status", and
+"commit" actions, so normally you only need to specify what to do for
+"checkout".
+
+Note that these shell commands are run in a "set -e" shell

 environment, where any additional parameters you pass are available in
 "$@". The "checkout" command is run in the parent of the repository
 directory, since the repository isn't checked out yet. All other commands
 environment, where any additional parameters you pass are available in
 "$@". The "checkout" command is run in the parent of the repository
 directory, since the repository isn't checked out yet. All other commands


@@ -132,42 +170,36 @@ are run inside the repository, though not necessarily at the top of it.
 The "MR_REPO" environment variable is set to the path to the top of the
 repository.
 
 The "MR_REPO" environment variable is set to the path to the top of the
 repository.
 

-There are three special parameters. If the "skip" parameter is set and
-its command returns nonzero, then B<mr> will skip acting on that repository.
+A few parameters have special meanings:
+
+=over 4
+
+=item skip
+
+If the "skip" parameter is set and its command returns nonzero, then B<mr>
+will skip acting on that repository.
+
+=item chain
+

 If the "chain" parameter is set and its command returns nonzero, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You
 If the "chain" parameter is set and its command returns nonzero, then B<mr>
 will try to load a .mrconfig file from the root of the repository. (You

-should avoid chaining from repositories with untrusted committers.) The
-"lib" parameter can specify some shell code that will be run before each
-command, this can be a useful way to define shell functions other commands
-can use.
-
-The "default" section allows setting up default handlers for each action,
-and is overridden by the contents of other sections. mr contains default
-handlers for the "update", "status", and "commit" actions, so normally
-you only need to specify what to do for "checkout".
+should avoid chaining from repositories with untrusted committers.)

 
 

-The "alias" section allows adding aliases for commands. Each parameter
-is an alias, and its value is the command to run.
+=item deleted

 
 

-For example:
+If the "deleted" parameter is set and its command returns nonzero, then
+B<mr> will treat the repository as deleted. It won't ever actually delete
+the repository, but it will warn if it sees the repsoitory's directory.
+This is useful when one mrconfig file is shared amoung multiple machines,
+to keep track of and remember to delete old repositories.

 
 

-  [src]
-  checkout = svn co svn://svn.example.com/src/trunk src
-  chain = true
+=item lib

 
 

-  [src/linux-2.6]
-  skip = small
-  checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+The "lib" parameter can specify some shell code that will be run before each
+command, this can be a useful way to define shell functions for other commands
+to use.

 
 

-  [default]
-  lib = \
-  small() {
-       case "$(hostname)" in; \
-       slug|snail); \
-               return 0; ;; ; \
-       esac; \
-       return 1; \
-  }
+=back

 
 =head1 AUTHOR
 
 
 =head1 AUTHOR
 


@@ -193,9 +225,9 @@ my %alias;
 
 Getopt::Long::Configure("no_permute");
 my $result=GetOptions(
 
 Getopt::Long::Configure("no_permute");
 my $result=GetOptions(

-       "d=s" => sub { $directory=abs_path($_[1]) },
-       "c=s" => \$config,
-       "v" => \$verbose,
+       "d|directory=s" => sub { $directory=abs_path($_[1]) },
+       "c|config=s" => \$config,
+       "verbose" => \$verbose,

 );
 if (! $result || @ARGV < 1) {
        die("Usage: mr [-d directory] action [params ...]\n".
 );
 if (! $result || @ARGV < 1) {
        die("Usage: mr [-d directory] action [params ...]\n".


@@ -215,29 +247,58 @@ eval {
 
 # alias expansion and command stemming
 my $action=shift @ARGV;
 
 # alias expansion and command stemming
 my $action=shift @ARGV;

+if (exists $alias{$action}) {
+       $action=$alias{$action};
+}

 if (! exists $knownactions{$action}) {
 if (! exists $knownactions{$action}) {

-       if (exists $alias{$action}) {
-               $action=$alias{$action};
+       my @matches = grep { /^\Q$action\E/ }
+               keys %knownactions, keys %alias;
+       if (@matches == 1) {
+               $action=$matches[0];
+       }
+       elsif (@matches == 0) {
+               die "mr: unknown action \"$action\" (known actions: ".
+                       join(", ", sort keys %knownactions).")\n";

        }
        else {
        }
        else {

-               my @matches = grep { /^\Q$action\E/ }
-                       keys %knownactions, keys %alias;
-               if (@matches == 1) {
-                       $action=$matches[0];
+               die "mr: ambiguous action \"$action\" (matches: ".
+                       join(", ", @matches).")\n";
+       }
+}
+
+if ($action eq 'help') {
+       exec($config{''}{DEFAULT}{$action}) || die "exec: $!";
+}
+elsif ($action eq 'config') {
+       if (@ARGV < 2) {
+               die "mr config: not enough parameters\n";
+       }
+       my $section=shift;
+       if ($section=~/^\//) {
+               # try to convert to a path relative to $config's dir
+               my ($dir)=$config=~/^(.*\/)[^\/]+$/;
+               if ($section=~/^\Q$dir\E(.*)/) {
+                       $section=$1;

                }
                }

-               elsif (@matches == 0) {
-                       die "mr: unknown action \"$action\" (known actions: ".
-                               join(", ", sort keys %knownactions).")\n";
+       }
+       my %fields;
+       foreach (@ARGV) {
+               if (/^([^=]+)=(.*)$/) {
+                       $fields{$1}=$2;

                }
                else {
                }
                else {

-                       die "mr: ambiguous action \"$action\" (matches: ".
-                               join(", ", @matches).")\n";
+                       die "mr config: expected parameter=value, not \"$_\"\n";

                }
        }
                }
        }

+       modifyconfig($config, $section, %fields);
+       exit 0;

 }
 }

-
-if ($action eq 'help') {
-       exec($config{''}{default}{help});
+elsif ($action eq 'register') {
+       my $command="set -e; ".$config{''}{DEFAULT}{lib}."\n".
+               "my_action(){ $config{''}{DEFAULT}{$action}\n }; my_action ".
+               join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
+       print STDERR "mr $action: running >>$command<<\n" if $verbose;
+       exec($command) || die "exec: $!";

 }
 
 # work out what repos to act on
 }
 
 # work out what repos to act on


@@ -245,9 +306,12 @@ my @repos;
 my $nochdir=0;
 foreach my $topdir (sort keys %config) {
        foreach my $subdir (sort keys %{$config{$topdir}}) {
 my $nochdir=0;
 foreach my $topdir (sort keys %config) {
        foreach my $subdir (sort keys %{$config{$topdir}}) {

-               next if $subdir eq 'default';
-               my $dir=$topdir.$subdir;
-               next if $dir ne $directory && $dir !~ /^\Q$directory\E\//;
+               next if $subdir eq 'DEFAULT';
+               my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;
+               my $d=$directory;
+               $dir.="/" unless $dir=~/\/$/;
+               $d.="/" unless $d=~/\/$/;
+               next if $dir ne $directory && $dir !~ /^\Q$directory\E/;

                push @repos, [$dir, $topdir, $subdir];
        }
 }
                push @repos, [$dir, $topdir, $subdir];
        }
 }


@@ -255,8 +319,8 @@ if (! @repos) {
        # fallback to find a leaf repo
        LEAF: foreach my $topdir (reverse sort keys %config) {
                foreach my $subdir (reverse sort keys %{$config{$topdir}}) {
        # fallback to find a leaf repo
        LEAF: foreach my $topdir (reverse sort keys %config) {
                foreach my $subdir (reverse sort keys %{$config{$topdir}}) {

-                       next if $subdir eq 'default';
-                       my $dir=$topdir.$subdir;
+                       next if $subdir eq 'DEFAULT';
+                       my $dir=($subdir =~/^\//) ? $subdir : $topdir.$subdir;

                        my $d=$directory;
                        $dir.="/" unless $dir=~/\/$/;
                        $d.="/" unless $d=~/\/$/;
                        my $d=$directory;
                        $dir.="/" unless $dir=~/\/$/;
                        $d.="/" unless $d=~/\/$/;


@@ -278,7 +342,23 @@ sub action {
        my ($action, $dir, $topdir, $subdir) = @_;
        
        my $lib= exists $config{$topdir}{$subdir}{lib} ?
        my ($action, $dir, $topdir, $subdir) = @_;
        
        my $lib= exists $config{$topdir}{$subdir}{lib} ?

-                       $config{$topdir}{$subdir}{lib} : "";
+                       $config{$topdir}{$subdir}{lib}."\n" : "";
+
+       if (exists $config{$topdir}{$subdir}{deleted}) {
+               if (! -d $dir) {
+                       next;
+               }
+               else {
+                       my $test="set -e;".$lib.$config{$topdir}{$subdir}{deleted};
+                       print "mr $action: running deleted test >>$test<<\n" if $verbose;
+                       my $ret=system($test);
+                       if ($ret >> 8 == 0) {
+                               print STDERR "mr error: $dir should be deleted yet still exists\n\n";
+                               push @failed, $dir;
+                               return;
+                       }
+               }
+       }

 
        if ($action eq 'checkout') {
                if (-d $dir) {
 
        if ($action eq 'checkout') {
                if (-d $dir) {


@@ -295,38 +375,41 @@ sub action {
        }
        
        $ENV{MR_REPO}=$dir;
        }
        
        $ENV{MR_REPO}=$dir;

-       if (! $nochdir && ! chdir($dir)) {
-               print STDERR "mr $action: failed to chdir to $dir: $!\n";
-               push @skipped, $dir;
-       }

 
        if (exists $config{$topdir}{$subdir}{skip}) {
 
        if (exists $config{$topdir}{$subdir}{skip}) {

-               my $ret=system($lib.$config{$topdir}{$subdir}{skip});
+               my $test="set -e;".$lib.$config{$topdir}{$subdir}{skip};
+               print "mr $action: running skip test >>$test<<\n" if $verbose;
+               my $ret=system($test);

                if ($ret >> 8 == 0) {
                        print "mr $action: $dir skipped per config file\n" if $verbose;
                        push @skipped, $dir;
                        return;
                }
        }
                if ($ret >> 8 == 0) {
                        print "mr $action: $dir skipped per config file\n" if $verbose;
                        push @skipped, $dir;
                        return;
                }
        }

-
-       if (! exists $config{$topdir}{$subdir}{$action}) {
+       
+       if (! $nochdir && ! chdir($dir)) {
+               print STDERR "mr $action: failed to chdir to $dir: $!\n";
+               push @failed, $dir;
+       }
+       elsif (! exists $config{$topdir}{$subdir}{$action}) {

                print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
                push @skipped, $dir;
        }
        else {
                if (! $nochdir) {
                print STDERR "mr $action: no defined $action command for $topdir$subdir, skipping\n";
                push @skipped, $dir;
        }
        else {
                if (! $nochdir) {

-                       print "mr $action: $dir\n";
+                       print "mr $action: $topdir$subdir\n";

                }
                else {
                }
                else {

-                       print "mr $action: $dir (in subdir $directory)\n";
+                       print "mr $action: $topdir$subdir (in subdir $directory)\n";

                }
                my $command="set -e; ".$lib.
                }
                my $command="set -e; ".$lib.

-                       "my_action(){ $config{$topdir}{$subdir}{$action} ; }; my_action ".
+                       "my_action(){ $config{$topdir}{$subdir}{$action}\n }; my_action ".

                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);
                        join(" ", map { s/\//\/\//g; s/"/\"/g; '"'.$_.'"' } @ARGV);

+               print STDERR "mr $action: running >>$command<<\n" if $verbose;

                my $ret=system($command);
                if ($ret != 0) {
                my $ret=system($command);
                if ($ret != 0) {

-                       print STDERR "mr $action: failed to run: $command\n" if $verbose;
-                       push @failed, $topdir.$subdir;
+                       print STDERR "mr $action: failed ($ret)\n" if $verbose;
+                       push @failed, $dir;

                        if ($ret >> 8 != 0) {
                                print STDERR "mr $action: command failed\n";
                        }
                        if ($ret >> 8 != 0) {
                                print STDERR "mr $action: command failed\n";
                        }


@@ -380,7 +463,6 @@ sub loadconfig {
                $dir="";
        }
        else {
                $dir="";
        }
        else {

-               # $f might be a symlink

                my $absf=abs_path($f);
                if ($loaded{$absf}) {
                        return;
                my $absf=abs_path($f);
                if ($loaded{$absf}) {
                        return;


@@ -399,8 +481,8 @@ sub loadconfig {
                my $parent=$dir;
                while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
                        if (exists $config{$parent} &&
                my $parent=$dir;
                while ($parent=~s/^(.*)\/[^\/]+\/?$/$1/) {
                        if (exists $config{$parent} &&

-                           exists $config{$parent}{default}) {
-                               $config{$dir}{default}={ %{$config{$parent}{default}} };
+                           exists $config{$parent}{DEFAULT}) {
+                               $config{$dir}{DEFAULT}={ %{$config{$parent}{DEFAULT}} };

                                last;
                        }
                }
                                last;
                        }
                }


@@ -418,31 +500,31 @@ sub loadconfig {
                        my $value=$2;
 
                        # continuation line
                        my $value=$2;
 
                        # continuation line

-                       while ($value=~/(.*)\\$/) {
-                               $value=$1.<$in>;
+                       while ($value=~/(.*)\\$/s) {
+                               $value=$1."\n".<$in>;

                                chomp $value;
                        }
 
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }
                                chomp $value;
                        }
 
                        if (! defined $section) {
                                die "$f line $.: parameter ($parameter) not in section\n";
                        }

-                       if ($section ne 'alias' &&
+                       if ($section ne 'ALIAS' &&

                            ! exists $config{$dir}{$section} &&
                            ! exists $config{$dir}{$section} &&

-                           exists $config{$dir}{default}) {
+                           exists $config{$dir}{DEFAULT}) {

                                # copy in defaults
                                # copy in defaults

-                               $config{$dir}{$section}={ %{$config{$dir}{default}} };
+                               $config{$dir}{$section}={ %{$config{$dir}{DEFAULT}} };

                        }
                        }

-                       if ($section eq 'alias') {
+                       if ($section eq 'ALIAS') {

                                $alias{$parameter}=$value;
                        }
                        elsif ($parameter eq 'lib') {
                                $alias{$parameter}=$value;
                        }
                        elsif ($parameter eq 'lib') {

-                               $config{$dir}{$section}{lib}.=$value." ; ";
+                               $config{$dir}{$section}{lib}.=$value."\n";

                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                                $knownactions{$parameter}=1;
                                if ($parameter eq 'chain' &&
                        }
                        else {
                                $config{$dir}{$section}{$parameter}=$value;
                                $knownactions{$parameter}=1;
                                if ($parameter eq 'chain' &&

-                                   length $dir && $section ne "default" &&
+                                   length $dir && $section ne "DEFAULT" &&

                                    -e $dir.$section."/.mrconfig" &&
                                    system($value) >> 8 == 0) {
                                        push @toload, $dir.$section."/.mrconfig";
                                    -e $dir.$section."/.mrconfig" &&
                                    system($value) >> 8 == 0) {
                                        push @toload, $dir.$section."/.mrconfig";


@@ -460,63 +542,192 @@ sub loadconfig {
        }
 }
 
        }
 }
 

+sub modifyconfig {
+       my $f=shift;
+       # the section to modify or add
+       my $targetsection=shift;
+       # fields to change in the section
+       # To remove a field, set its value to "".
+       my %changefields=@_;
+
+       my @lines;
+       if (-e $f) {
+               open(my $in, "<", $f) || die "mr: open $f: $!\n";
+               @lines=<$in>;
+               close $in;
+       }
+
+       my $section;
+       my @out;
+       while (@lines) {
+               $_=shift(@lines);
+
+               if (/^\s*\#/ || /^\s*$/) {
+                       push @out, $_;
+               }
+               elsif (/^\s*\[([^\]]*)\]\s*$/) {
+                       if (defined $section && 
+                           $section eq $targetsection) {
+                               my @blanks;
+                               while ($out[$#out] =~ /^\s*$/) {
+                                       unshift @blanks, pop @out;
+                               }
+                               foreach my $field (sort keys %changefields) {
+                                       if (length $changefields{$field}) {
+                                               push @out, "$field = $changefields{$field}\n";
+                                       }
+                               }
+                               push @out, @blanks;
+                       }
+
+                       $section=$1;
+
+                       push @out, $_;
+               }
+               elsif (/^\s*(\w+)\s*=\s(.*)/) {
+                       my $parameter=$1;
+                       my $value=$2;
+
+                       # continuation line
+                       while ($value=~/(.*\\)$/s) {
+                               $value=$1."\n".shift(@lines);
+                               chomp $value;
+                       }
+
+                       if ($section eq $targetsection) {
+                               if (exists $changefields{$parameter}) {
+                                       if (length $changefields{$parameter}) {
+                                               $value=$changefields{$parameter};
+                                       }
+                                       delete $changefields{$parameter};
+                               }
+                       }
+
+                       push @out, "$parameter = $value\n";
+               }
+       }
+
+       if (%changefields) {
+               push @out, "\n[$targetsection]\n";
+               foreach my $field (sort keys %changefields) {
+                       if (length $changefields{$field}) {
+                               push @out, "$field = $changefields{$field}\n";
+                       }
+               }
+       }
+
+       open(my $out, ">", $f) || die "mr: write $f: $!\n";
+       print $out @out;
+       close $out;     
+}
+

 # Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
 __DATA__
 # Finally, some useful actions that mr knows about by default.
 # These can be overridden in ~/.mrconfig.
 __DATA__

-[alias]
+[ALIAS]

        co = checkout
        ci = commit
        ls = list
        co = checkout
        ci = commit
        ls = list

-[default]
-lib = \
-       error() { \
-               echo "mr: $@" >&2; \
-               exit 1; \
+
+[DEFAULT]
+lib =                                                  \
+       error() {                                       \
+               echo "mr: $@" >&2                       \
+               exit 1                                  \

        }
        }

-update = \
-       if [ -d "$MR_REPO"/.svn ]; then \
-               svn update "$@"; \
-       elif [ -d "$MR_REPO"/.git ]; then \
-               git pull origin master "$@"; \
-       else \
-               error "unknown repo type"; \
+
+update =                                               \
+       if [ -d "$MR_REPO"/.svn ]; then                 \
+               svn update "$@"                         \
+       elif [ -d "$MR_REPO"/.git ]; then               \
+               git pull origin master "$@"             \
+       elif [ -d "$MR_REPO"/.bzr ]; then               \
+               bzr merge "$@"                          \
+       elif [ -d "$MR_REPO"/CVS ]; then                \
+               cvs update "$@"                         \
+       else                                            \
+               error "unknown repo type"               \

        fi
        fi

-status = \
-       if [ -d "$MR_REPO"/.svn ]; then \
-               svn status "$@"; \
-       elif [ -d "$MR_REPO"/.git ]; then \
-               git status "$@" || true; \
-       else \
-               error "unknown repo type"; \
+status =                                               \
+       if [ -d "$MR_REPO"/.svn ]; then                 \
+               svn status "$@"                         \
+       elif [ -d "$MR_REPO"/.git ]; then               \
+               git status "$@" || true                 \
+       elif [ -d "$MR_REPO"/.bzr ]; then               \
+               bzr status "$@"                         \
+       elif [ -d "$MR_REPO"/CVS ]; then                \
+               cvs status "$@"                         \
+       else                                            \
+               error "unknown repo type"               \

        fi
        fi

-commit = \
-       if [ -d "$MR_REPO"/.svn ]; then \
-               svn commit "$@"; \
-       elif [ -d "$MR_REPO"/.git ]; then \
-               git commit -a "$@" && git push --all; \
-       else \
-               error "unknown repo type"; \
+commit =                                               \
+       if [ -d "$MR_REPO"/.svn ]; then                 \
+               svn commit "$@"                         \
+       elif [ -d "$MR_REPO"/.git ]; then               \
+               git commit -a "$@" && git push --all    \
+       elif [ -d "$MR_REPO"/.bzr ]; then               \
+               bzr commit "$@" && bzr push             \
+       elif [ -d "$MR_REPO"/CVS ]; then                \
+               cvs commit "$@"                         \
+       else                                            \
+               error "unknown repo type"               \

        fi
        fi

-diff = \
-       if [ -d "$MR_REPO"/.svn ]; then \
-               svn diff "$@"; \
-       elif [ -d "$MR_REPO"/.git ]; then \
-               git diff "$@"; \
-       else \
-               error "unknown repo type"; \
+diff =                                                 \
+       if [ -d "$MR_REPO"/.svn ]; then                 \
+               svn diff "$@"                           \
+       elif [ -d "$MR_REPO"/.git ]; then               \
+               git diff "$@"                           \
+       elif [ -d "$MR_REPO"/.bzr ]; then               \
+               bzr diff "$@"                           \
+       elif [ -d "$MR_REPO"/CVS ]; then                \
+               cvs diff "$@"                           \
+       else                                            \
+               error "unknown repo type"               \

        fi
        fi

-log = \
-       if [ -d "$MR_REPO"/.svn ]; then \
-               svn log"$@"; \
-       elif [ -d "$MR_REPO"/.git ]; then \
-               git log "$@"; \
-       else \
-               error "unknown repo type"; \
+log =                                                  \
+       if [ -d "$MR_REPO"/.svn ]; then                 \
+               svn log"$@"                             \
+       elif [ -d "$MR_REPO"/.git ]; then               \
+               git log "$@"                            \
+       elif [ -d "$MR_REPO"/.bzr ]; then               \
+               bzr log "$@"                            \
+       elif [ -d "$MR_REPO"/CVS ]; then                \
+               cvs log "$@"                            \
+       else                                            \
+               error "unknown repo type"               \
+       fi
+register =                                                             \
+       if [ -z "$1" ]; then                                            \
+               error "repository directory not specified"              \
+       fi                                                              \
+       cd "$1"                                                         \
+       basedir="$(basename $(pwd))"                                    \
+       if [ -d .svn ]; then                                            \
+               url=$(svn info . |                                      \
+                     grep -i ^URL: | cut -d ' ' -f 2)                  \
+               if [ -z "$url" ]; then                                  \
+                       error "cannot determine svn url"                \
+               fi                                                      \
+               echo "Found svn url: $url"                              \
+               mr config "$(pwd)" checkout="svn co $url $basedir"      \
+       elif [ -d .git ]; then                                          \
+               url=$(git-config --get remote.origin.url)               \
+               if [ -z "$url" ]; then                                  \
+                       error "cannot determine git url"                \
+               fi                                                      \
+               echo "Found git url: $url"                              \
+               mr config "$(pwd)" checkout="git clone $url $basedir"   \
+       else                                                            \
+               error "unable to register this repo type"               \

        fi
 list = true
        fi
 list = true

-help = \
-       if [ ! -e "$MR_PATH" ]; then \
-               error "cannot find program path";\
-       fi; \
-       (pod2man -c mr "$MR_PATH" | man -l -) || \
+config = 
+help =                                                 \
+       if [ ! -e "$MR_PATH" ]; then                    \
+               error "cannot find program path"        \
+       fi                                              \
+       (pod2man -c mr "$MR_PATH" | man -l -) ||        \

                error "pod2man or man failed"
                error "pod2man or man failed"

+
+ed = echo "A horse is a horse, of course, of course.."
+T = echo "I pity the fool."