]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

Ignore patch files
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index eb852a01aa9103fc4b4b1e953d2c67e20174a290..18288805d4e7c94b99d1bee21d095556d75d034e 100755 (executable)
--- a/vcsh
+++ b/vcsh
@@ -1,24 +1,23 @@
 #!/bin/sh
 
-[ "$VCSH_DEBUG" -gt 0 ] && set -x
+[ -n "$VCSH_DEBUG" ] && set -x
 
 SELF=$(basename $0)
 
 [ -z "$XDG_CONFIG_HOME" ] && XDG_CONFIG_HOME="$HOME/.config"
-for check_directory in $XDG_CONFIG_HOME $XDG_CONFIG_HOME/vcsh $XDG_CONFIG_HOME/vcsh/repo.d
+[ -z "$VCSH_BASE" ]       && VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
+for check_directory in "$VCSH_BASE"
 do
        if [ ! -d "$check_directory" ]; then
                if [ -e "$check_directory" ]; then
                        echo "$SELF: error: $check_directory exists but is not a directory" >&2
                        exit 2
                else
-                       mkdir $check_directory || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
+                       mkdir -p "$check_directory" || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
                fi
        fi
 done
 
-VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
-
 debug() {
        [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $1"
 }
@@ -27,26 +26,28 @@ verbose() {
        if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $1"; fi
 }
 
+#   use <repo>     Use this repository
+#
+#   exit              Exit vcsh mode" >&2
 help() {
        echo "usage: $SELF <args>
 
-   help           Display this help
-
-   list           List all repos
+   help              Display this help
 
-   use <repo>     Use this repository
-   run <repo>
-       <command>  Use this repository
+   list              List all repos
 
-   init           Initialize a new repository
-   clone <remote>
-         [<repo>] Clone from an existing repository
+   run <repo> \\
+       <command>     Use this repository
 
-   exit           Exit vcsh mode" >&2
+   init <repo>       Initialize a new repository
+   clone <remote> \\
+         [<repo>]    Clone from an existing repository
+   seed-gitignore \\
+   <repo>            Seed .gitignore.d/<repo> from git ls-files" >&2
 }
 
 use() {
-       verbose "use() start"
+       verbose "use() begin"
        REPO_NAME="$1"
        GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
 
@@ -58,23 +59,23 @@ use() {
        export GIT_DIR
        export GIT_WORK_TREE="$(git config --get core.worktree)"
        export VCSH_DIRECTORY="$REPO_NAME"
-       verbose "use() stop"
+       verbose "use() end"
 }
 
 init() {
-       verbose "init() start"
+       verbose "init() begin"
        [ -e "$GIT_DIR" ] &&
                echo "$SELF: fatal: $GIT_DIR exists" &&
                return 21
        export GIT_WORK_TREE="$HOME"
-       mkdir -p $GIT_WORK_TREE
-       cd $GIT_WORK_TREE ||
+       mkdir -p "$GIT_WORK_TREE"
+       cd "$GIT_WORK_TREE" ||
                (echo "$SELF: fatal: could not enter $GIT_WORK_TREE" &&
                 exit 20) || exit 20
-       cd $GIT_WORK_TREE
+       cd "$GIT_WORK_TREE"
        git init
-       git config core.worktree $GIT_WORK_TREE
-       verbose "init() stop"
+       git config core.worktree "$GIT_WORK_TREE"
+       verbose "init() end"
 }
 
 leave() {
@@ -89,51 +90,51 @@ if [ "$1" = 'help' ] || [ "$#" -eq 0 ]; then
        exit $?
 
 elif [ "$1" = 'list' ]; then
-       verbose "list start"
-       for i in $VCSH_BASE/*.git; do
-               echo $(basename $i .git)
+       verbose "list begin"
+       for i in "$VCSH_BASE"/*.git; do
+               echo $(basename "$i" .git)
        done
-       verbose "list stop"
+       verbose "list end"
        exit 0
 
 elif [ "$1" = 'run' ]; then
-       verbose "run start"
-       use $2
+       verbose "run begin"
+       use "$2"
        shift 2
        "$@"
        leave
-       verbose "run start"
+       verbose "run end"
        exit 0
 
-elif [ "$1" = 'use' ]; then
-       verbose "use start"
-       if [ -n "$ZSH_VERSION" ]; then
-               if [ -o NO_IGNORE_EOF ]; then
-                       export VCSH_NO_IGNORE_EOF=1
-                       setopt IGNORE_EOF
-               fi
-               vcsh_exit() {
-                       vcsh exit;
-                       zle reset-prompt;
-               }
-               zle -N vcsh_exit
-               bindkey '^d' 'vcsh_exit'
-       fi
-       use $2
-       [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-       verbose "use stop"
-       exit 0
+#elif [ "$1" = 'use' ]; then
+#      verbose "use begin"
+#      if [ -n "$ZSH_VERSION" ]; then
+#              if [ -o NO_IGNORE_EOF ]; then
+#                      export VCSH_NO_IGNORE_EOF=1
+#                      setopt IGNORE_EOF
+#              fi
+#              vcsh_exit() {
+#                      vcsh exit;
+#                      zle reset-prompt;
+#              }
+#              zle -N vcsh_exit
+#              bindkey '^d' 'vcsh_exit'
+#      fi
+#      use $2
+#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
+#      verbose "use end"
+#      exit 0
 
 elif [ "$1" = 'clone' ]; then
-       verbose "clone start"
+       verbose "clone begin"
        GIT_REMOTE="$2"
        REPO_NAME="$3"
-       [ -z "$REPO_NAME" ] && REPO_NAME=$(basename $GIT_REMOTE .git)
+       [ -z "$REPO_NAME" ] && REPO_NAME=$(basename "$GIT_REMOTE" .git)
        export REPO_NAME
        export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
        init
 
-       git remote add origin $GIT_REMOTE
+       git remote add origin "$GIT_REMOTE"
        git config branch.master.remote origin
        git config branch.master.merge  refs/heads/master
        git fetch
@@ -142,31 +143,53 @@ elif [ "$1" = 'clone' ]; then
                        echo "$SELF: error: $object exists." &&
                        VCSH_CONFLICT=1;
        done
-       [ -n "$VCSH_CONFLICT" ] &&
+       [ "$VCSH_CONFLICT" = '1' ] &&
                echo "$SELF: fatal: will stop after fetching and not try to merge!\n" &&
+               echo "  Once this situation has been resolved, run 'vcsh run <foo> git pull' to finish cloning.\n" &&
                exit 3
        git merge origin/master
-       vcsh use $REPO_NAME
+#      vcsh use $REPO_NAME
        verbose "clone end"
 
 elif [ "$1" = 'init' ]; then
-       verbose "init start"
+       verbose "init begin"
+       [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
        export REPO_NAME="$2"
        export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
        init
-       vcsh use $REPO_NAME
-       verbose "init stop"
-
-elif [ "$1" = 'exit' ]; then
-       verbose "exit start"
-       if [ -n "$ZSH_VERSION" ] && [ -n "$VCSH_NO_IGNORE_EOF" ]; then
-               unset VCSH_NO_IGNORE_EOF
-               setopt NO_IGNORE_EOF
-       fi
-       leave
-       [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-       verbose "exit stop"
-       exit 0
+#      vcsh use "$REPO_NAME"
+       verbose "init end"
+
+#elif [ "$1" = 'exit' ]; then
+#      verbose "exit begin"
+#      if [ -n "$ZSH_VERSION" ] && [ "$VCSH_NO_IGNORE_EOF" = '1' ]; then
+#              unset VCSH_NO_IGNORE_EOF
+#              setopt NO_IGNORE_EOF
+#      fi
+#      leave
+#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
+#      verbose "exit end"
+#      exit 0
+
+elif [ "$1" = 'seed-gitignore' ]; then
+       verbose "seed-gitignore begin"
+       [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
+       use "$2"
+       files=$(git ls-files)
+       gitignores=$(for file in $(git ls-files); do
+               while true; do
+                       echo $file; new="${file%/*}"
+                       [ "$file" = "$new" ] && break
+                       file="$new"
+               done;
+       done | sort -u | sed 's/^/!/')
+       [ -e .gitignore.d/$2 ] &&
+       echo "$SELF: .gitignore.d/$2 exists, moving it to .gitignore.d/$2.bak" &&
+       mv -f .gitignore.d/$2 .gitignore.d/$2.bak
+       echo '*' > .gitignore.d/$2
+       for gitignore in $gitignores; do
+               echo $gitignore >> .gitignore.d/$2
+       done
 
 else
        verbose "defaulting to calling help()"