]>
git.madduck.net Git - code/vcsh.git/blobdiff - README.md
madduck's git repository
Every one of the projects in this repository is available at the canonical
URL git://git.madduck.net/madduck/pub/<projectpath> — see
each project's metadata for the exact URL.
All patches and comments are welcome. Please squash your changes to logical
commits before using git-format-patch and git-send-email to
patches@ git. madduck. net .
If you'd read over the Git project's submission guidelines and adhered to them,
I'd be especially grateful.
SSH access, as well as push access can be individually
arranged .
If you use my repositories frequently, consider adding the following
snippet to ~/.gitconfig and using the third clone URL listed for each
project:
[url "git://git.madduck.net/madduck/"]
insteadOf = madduck:
or available to root and you may want to maintain different configuration for
`ssh` on your personal and your work machines.
or available to root and you may want to maintain different configuration for
`ssh` on your personal and your work machines.
-A lot of modern UNIX-based systems offer pacak ges for `vcsh`. In case yours
+A lot of modern UNIX-based systems offer packa ges for `vcsh`. In case yours
does not read `INSTALL.md` for install instructions or `PACKAGING.md` to create
a package, yourself. If you do end up packaging `vcsh` please let us know so we
can give you your own packaging branch in the upstream repository.
does not read `INSTALL.md` for install instructions or `PACKAGING.md` to create
a package, yourself. If you do end up packaging `vcsh` please let us know so we
can give you your own packaging branch in the upstream repository.
There are three different ways to interact with `vcsh` repositories; this
section will only show the simplest and easiest way.
Certain more advanced use cases require the other two ways, but don't worry
There are three different ways to interact with `vcsh` repositories; this
section will only show the simplest and easiest way.
Certain more advanced use cases require the other two ways, but don't worry
-about this for now. If you never ew en bother playing with the other two
+about this for now. If you never ev en bother playing with the other two
modes you will still be fine.
`vcsh enter` and `vcsh run` will be covered in later sections.
modes you will still be fine.
`vcsh enter` and `vcsh run` will be covered in later sections.
-## Initialize a new repository "vim"
+## Initialize a new repository called "vim"
+## Show status of changed files in all repositories
+ vcsh status
+
+## Pull from all repositories
+
+ vcsh pull
+
+## Push to all repositories
+
+ vcsh push
[$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git]
checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh
[$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git]
checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh
- update = vcsh run zsh git pull
- push = vcsh run zsh git push
- status = vcsh run zsh git status
- gc = vcsh run zsh git gc
+ update = vcsh zsh pull
+ push = vcsh zsh push
+ status = vcsh zsh status
+ gc = vcsh zsh gc
- jobs = 5
- # Use if your mr does not have vcsh support in mainline, yet
- include = cat /usr/share/mr/vcsh
include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/*
### repo.d
include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/*
### repo.d
vcsh will check if any file it would want to create exists. If it exists, vcsh
will throw a warning and exit. Move away your old config and try again.
Optionally, merge your local and your global configs afterwards and push with
vcsh will check if any file it would want to create exists. If it exists, vcsh
will throw a warning and exit. Move away your old config and try again.
Optionally, merge your local and your global configs afterwards and push with
-`vcsh run foo git push`.
## Moving into a New Host
## Moving into a New Host
example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr`
2. Choose your repositories by linking them in config.d (or go with the default
you may have already configured by adding symlinks to git).
example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr`
2. Choose your repositories by linking them in config.d (or go with the default
you may have already configured by adding symlinks to git).
-3. Make sure the line 'include = cat /usr/share/mr/vcsh' in .mrconfig points
- to an existing file
-4. Run mr to clone the repositories: `cd; mr update`.
-5. Done.
+3. Run mr to clone the repositories: `cd; mr update`.
+4. Done.
Hopefully the above could help explain how this approach saves time by
Hopefully the above could help explain how this approach saves time by
-If your version of mr is older than version 1.07, make sure to put
-
- include = cat /usr/share/mr/vcsh
-
-into your .mrconfig .
-
# choose a location for your checkout
# choose a location for your checkout
git clone git://github.com/RichiH/vcsh.git
cd vcsh
git clone git://github.com/RichiH/vcsh.git
cd vcsh
- ln -s vcsh /usr/local/bin # or add it to your PATH
+ sudo ln -s vcsh /usr/local/bin # or add it to your PATH
cd
#### Clone the Template
cd
#### Clone the Template
And then create your own stuff:
vcsh init foo
And then create your own stuff:
vcsh init foo
- vcsh run foo git add -f bar baz quux
- vcsh run foo git remote add origin git://quuux
- vcsh run foo git commit
- vcsh run foo git push
+ vcsh foo add bar baz quux
+ vcsh foo remote add origin git://quuux
+ vcsh foo commit
+ vcsh foo push
cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh
vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo
cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh
vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo
After you have made some changes, for which you would normally use `git add`
and `git commit`, use the vcsh wrapper (like above):
After you have made some changes, for which you would normally use `git add`
and `git commit`, use the vcsh wrapper (like above):
- vcsh run foo git add -f bar baz quux
- vcsh run foo git commit
- vcsh run foo git push
-
-By the way, you'll have to use -f/--force flag with git-add because all files
-will be ignored by default. This is to show you only useful output when running
-git-status. A fix for this problem is being worked on.
+ vcsh foo add bar baz quux
+ vcsh foo commit
+ vcsh foo push
### Using vcsh without mr
### Using vcsh without mr
To interact with a repository, use the regular Git commands, but prepend them
with `vcsh run $repository_name`. For example:
To interact with a repository, use the regular Git commands, but prepend them
with `vcsh run $repository_name`. For example:
- vcsh run zsh git status
- vcsh run zsh git add -f .zshrc
- vcsh run zsh git commit
+ vcsh zsh status
+ vcsh zsh add .zshrc
+ vcsh zsh commit
Obviously, without mr keeping repositories up-to-date, it will have to be done
manually. Alternatively, you could try something like this:
Obviously, without mr keeping repositories up-to-date, it will have to be done
manually. Alternatively, you could try something like this:
projects / code / vcsh.git / blobdiff