# Index
-1. [Introduction](#introduction)
-2. [30 second howto](#30-second-howto)
-3. [Overview](#overview)
-4. [Getting Started](#getting-started)
-5. [Usage Exmaples](#usage-examples)
+1. [30 second howto](#30-second-howto)
+2. [Introduction](#introduction)
+3. [Usage Exmaples](#usage-examples)
+4. [Overview](#overview)
+5. [Getting Started](#getting-started)
6. [Contact](#contact)
+# 30 second howto
+
+While it may appear that there's an overwhelming amount of documentation and
+while the explanation of the concepts behind `vcsh` needs to touch a few gory
+details of `git` internals, getting started with `vcsh` is extremely simple.
+
+Let's say you want to version control your `vim` configuration:
+
+ vcsh init vim
+ vcsh vim add ~/.vimrc ~/.vim
+ vcsh vim commit -m 'Initial commit of my Vim configuration'
+ # optionally push your files to a remote
+ vcsh vim remote add origin <remote>
+ vcsh vim push -u origin master
+ # from now on you can push additional commits like this
+ vcsh vim push
+
+If all that looks a _lot_ like standard `git`, that's no coincidence; it's
+a design feature.
+
+
# Introduction
-[vcsh][vcsh] allows you to maintain several git repositories in one single
+[vcsh][vcsh] allows you to maintain several Git repositories in one single
directory. They all maintain their working trees without clobbering each other
-or interfering otherwise. By default, all git repositories maintained via
-`vcsh` are stored in `$HOME` but you can override this setting if you want to.
+or interfering otherwise. By default, all Git repositories maintained via
+`vcsh` store the actual files in `$HOME` but you can override this setting if
+you want to.
+
All this means that you can have one repository per application or application
family, i.e. `zsh`, `vim`, `ssh`, etc. This, in turn, allows you to clone
custom sets of configurations onto different machines or even for different
or available to root and you may want to maintain different configuration for
`ssh` on your personal and your work machines.
-`vcsh` was designed with [mr][mr], a tool to manage Multiple Repositories, in
-mind and the two integrate very nicely. `mr` has native support for `vcsh`
-repositories and to `vcsh`, `mr` is just another configuration to track.
-This make setting up any new machine a breeze. It takes literally less than
-five minutes to go from standard installation to fully set up system
-
-A lot of modern UNIX-based systems offer pacakges for `vcsh`. In case yours
+A lot of modern UNIX-based systems offer packages for `vcsh`. In case yours
does not read `INSTALL.md` for install instructions or `PACKAGING.md` to create
a package, yourself. If you do end up packaging `vcsh` please let us know so we
can give you your own packaging branch in the upstream repository.
## Talks
Some people found it useful to look at slides and videos explaining how `vcsh`
-works instead of working through the docs, first.
-They can all be found [on the author's talk page][talks].
+works instead of working through the docs.
+All slides, videos, and further information can be found
+[on the author's talk page][talks].
-# 30 second howto
+# Usage Examples
-While it may appear that there's an overwhelming amount of documentation and
-while the explanation of the concepts behind `vcsh` needs to touch a few gory
-details of `git` internals, getting started with `vcsh` is extremely simple.
+There are three different ways to interact with `vcsh` repositories; this
+section will only show the simplest and easiest way.
-Let's say you want to version control your `vim` configuration:
+Certain more advanced use cases require the other two ways, but don't worry
+about this for now. If you never even bother playing with the other two
+modes you will still be fine.
- vcsh init vim
- vcsh vim add ~/.vimrc ~/.vim
- vcsh vim commit -m 'Initial commit of my Vim configuration'
- # optionally push your files to a remote
- vcsh vim remote add origin <remote>
- vcsh vim push origin master:master
- vcsh vim branch --track master origin/master
+`vcsh enter` and `vcsh run` will be covered in later sections.
-If all that looks a _lot_ like standard `git`, that's no coincidence; it's
-a design feature.
+
+| Task | Command |
+| ----------------------------------------------------- | ------------------------------------------------- |
+| _Initialize a new repository called "vim"_ | `vcsh init vim` |
+| _Clone an existing repository_ | `vcsh clone <remote> <repository_name>` |
+| _Add files to repository "vim"_ | `vcsh vim add ~/.vimrc ~/.vim` |
+| | `vcsh vim commit -m 'Update Vim configuration'` |
+| _Add a remote for repository "vim"_ | `vcsh vim remote add origin <remote>` |
+| | `vcsh vim push origin master:master` |
+| | `vcsh vim branch --track master origin/master` |
+| _Push to remote of repository "vim"_ | `vcsh vim push` |
+| _Pull from remote of repository "vim"_ | `vcsh vim pull` |
+| _Show status of changed files in all repositories_ | `vcsh status` |
+| _Pull from all repositories_ | `vcsh pull` |
+| _Push to all repositories_ | `vcsh push` |
# Overview
As `vcsh` allows you to put an arbitrary number of distinct repositories into
your `$HOME`, you will end up with a lot of repositories very quickly.
-To manage both `vcsh` and other repositories, we suggest using [mr](mr). `mr`
-takes care of pulling in and pushing out new data for a variety of version
-control systems.
+`vcsh` was designed with [myrepos][myrepos], a tool to manage Multiple
+Repositories, in mind and the two integrate very nicely. The myrepos tool
+(`mr`) has native support for `vcsh` repositories and the configuration for
+myrepos is just another set of files that you cat track with `vcsh` like any
+other. This makes setting up any new machine a breeze. It can take literally
+less than five minutes to go from standard installation to fully set up system.
-
-The last logical step is to maintain all those new repositores with an automated
-tool instead of tracking them by hand.
-This is where `mr` comes in. While the use of `mr` is technically
-optional, but it will be an integral part of the proposed system that follows.
+We suggest using [myrepos][myrepos] to manage both `vcsh` and other repositories. The
+`mr` utility takes care of pulling in and pushing out new data for a variety of
+version control systems. While the use of myrepos is technically optional, it will
+be an integral part of the proposed system that follows.
## Default Directory Layout
### available.d
-The files you see in $XDG\_CONFIG\_HOME/mr/available.d are mr configuration files
-that contain the commands to manage (checkout, update etc.) a single
-repository. vcsh repo configs end in .vcsh, git configs end in .git, etc. This
-is optional and your preference. For example, this is what a zsh.vcsh
-with read-only access to my zshrc repo looks likes. I.e. in this specific
-example, push can not work as you will be using the author's repository. This
-is for demonstration, only. Of course, you are more than welcome to clone from
-this repository and fork your own.
+The files you see in $XDG\_CONFIG\_HOME/mr/available.d are myrepos
+configuration files that contain the commands to manage (checkout, update
+etc.) a single repository. vcsh repo configs end in .vcsh, git configs end
+in .git, etc. This is optional and your preference. For example, this is
+what a zsh.vcsh with read-only access to my zshrc repo looks likes. I.e. in
+this specific example, push can not work as you will be using the author's
+repository. This is for demonstration, only. Of course, you are more than
+welcome to clone from this repository and fork your own.
[$XDG_CONFIG_HOME/vcsh/repo.d/zsh.git]
checkout = vcsh clone 'git://github.com/RichiH/zshrc.git' zsh
- update = vcsh run zsh git pull
- push = vcsh run zsh git push
- status = vcsh run zsh git status
- gc = vcsh run zsh git gc
+ update = vcsh zsh pull
+ push = vcsh zsh push
+ status = vcsh zsh status
+ gc = vcsh zsh gc
### config.d
$XDG\_CONFIG\_HOME/mr/available.d contains *all available* repositories. Only
-files/links present in mr/config.d, however, will be used by mr. That means
+files/links present in mr/config.d, however, will be used by myrepos. That means
that in this example, only the zsh, gitconfigs, tmux and vim repositories will
be checked out. A simple `mr update` run in $HOME will clone or update those
four repositories listed in config.d.
this:
[DEFAULT]
- jobs = 5
- # Use if your mr does not have vcsh support in mainline, yet
- include = cat /usr/share/mr/vcsh
include = cat ${XDG_CONFIG_HOME:-$HOME/.config}/mr/config.d/*
### repo.d
are under vcsh's control are located. Since their working trees are configured
to be in $HOME, the files contained in those repositories will be put in $HOME
directly.
-Of course, [mr] [mr] will work with this layout if configured according to this
-document (see above).
+
+Of course, [myrepos][myrepos] will work with this layout if configured according to
+this document (see above).
vcsh will check if any file it would want to create exists. If it exists, vcsh
will throw a warning and exit. Move away your old config and try again.
Optionally, merge your local and your global configs afterwards and push with
-`vcsh run foo git push`.
+`vcsh foo push`.
## Moving into a New Host
To illustrate further, the following steps could move your desired
configuration to a new host.
-1. Clone the mr repository (containing available.d, config.d etc.); for
+1. Clone the myrepos repository (containing available.d, config.d etc.); for
example: `vcsh clone git://github.com/RichiH/vcsh_mr_template.git mr`
2. Choose your repositories by linking them in config.d (or go with the default
you may have already configured by adding symlinks to git).
-3. Make sure the line 'include = cat /usr/share/mr/vcsh' in .mrconfig points
- to an existing file
-4. Run mr to clone the repositories: `cd; mr update`.
-5. Done.
+3. Run myrepos to clone the repositories: `cd; mr update`.
+4. Done.
Hopefully the above could help explain how this approach saves time by
1. making it easy to manage, clone and update a large number of repositories
- (thanks to mr) and
+ (thanks to myrepos) and
2. making it unnecessary to create symbolic links in $HOME (thanks to vcsh).
If you want to give vcsh a try, follow the instructions below.
All of the files are part of the template repository, the directory is where
the template will be stored.
- apt-get install mr
-
-#### Install vcsh
+### Install vcsh
#### Debian
-If you are using Debian Squeeze, you will need to enable backports
+If you are using Debian Squeeze, you will need to enable backports and the
+package name for myrepos will be 'mr'.
+
+From Wheezy onwards, you can install both directly:
+
+ apt-get install myrepos vcsh
+
+#### Gentoo
- apt-get install vcsh
+To install vcsh in Gentoo Linux just give the following command as root:
+
+ emerge dev-vcs/vcsh
+
+Note the portage package for myrepos still has the old project name:
+
+ emerge dev-vcs/mr
#### Arch Linux
-vcsh is availabe via [AUR](https://aur.archlinux.org/packages.php?ID=54164)
-and further documentation about the use of AUR is available
-[on Arch's wiki](https://wiki.archlinux.org/index.php/Arch_User_Repository).
+vcsh is available via this [AUR](https://aur.archlinux.org/packages/vcsh/)
+package. Likewise myrepos is available [here](https://aur.archlinux.org/packages/myrepos/).
+You may install both useing your favorite AUR helper. e.g. with yaourt:
- cd /var/abs/local/
- wget https://aur.archlinux.org/packages/vc/vcsh-git/vcsh-git.tar.gz
- tar xfz vcsh-git.tar.gz
- cd vcsh-git
- makepkg -s
- pacman -U vcsh*.pkg.tar.xz
+ yaourt -Sya myrepos vcsh
-#### From source
+Or you can do it yourself manually using the documentation on installing AUR packages
+[on Arch's wiki](https://wiki.archlinux.org/index.php/Arch_User_Repository#Installing_packages).
-If your version of mr is older than version 1.07, make sure to put
+If you prefer to use the devel package that installs the git HEAD version it
+is available [here](https://aur.archlinux.org/packages/vcsh-git/).
- include = cat /usr/share/mr/vcsh
+#### Mac OSX
-into your .mrconfig .
+Formulas are available for vcsh as well as git and myrepos through [homebrew](http://brew.sh). The
+vcsh formula is set to depend on myrepos, so you only need one install command:
+
+ brew install vcsh
+
+#### From source
+
+To install the latest version from git:
# choose a location for your checkout
- cd $HOME
mkdir -p ~/work/git
+ cd ~/work/git
git clone git://github.com/RichiH/vcsh.git
cd vcsh
- ln -s vcsh /usr/local/bin # or add it to your PATH
- cd
+ sudo ln -s vcsh /usr/local/bin # or add it to your PATH
+
+For myrepos:
+
+ # use checkout location from above
+ cd ~/work/git
+ git clone git://myrepos.branchable.com/ myrepos
+ cd myrepos
+ make install
#### Clone the Template
And then create your own stuff:
vcsh init foo
- vcsh run foo git add -f bar baz quux
- vcsh run foo git remote add origin git://quuux
- vcsh run foo git commit
- vcsh run foo git push
+ vcsh foo add bar baz quux
+ vcsh foo remote add origin git://quuux
+ vcsh foo commit
+ vcsh foo push
cp $XDG_CONFIG_HOME/mr/available.d/mr.vcsh $XDG_CONFIG_HOME/mr/available.d/foo.vcsh
vim $XDG_CONFIG_HOME/mr/available.d/foo.vcsh # add your own repo
sudo ln -s ~/work/git/vcsh/vcsh /usr/bin/local
hash -r
-Grab my mr config. see below for details on how I set this up
+Grab my myrepos config. see below for details on how I set this up
vcsh clone ssh://<remote>/mr.git
cd $XDG_CONFIG_HOME/mr/config.d/
ln -s ../available.d/* .
-mr is used to actually retrieve configs, etc
+myrepos is used to actually retrieve configs, etc
~ % cat ~/.mrconfig
[DEFAULT]
~ % mr -j 5 up
-# Usage Examples
-
-All examples in this section will use the short form of `vcsh` which is the
-simplest way to interface with it. If you don't know what that means simply
-ignore this fact for now and follow the examples.
-
-## Initialize a new repository "vim"
-
- vcsh init vcsh
-
-## Clone an existing repository
-
- vcsh clone <remote> <repository_name>
-
-## Add files to repository "vim"
-
- vcsh vim add ~/.vimrc ~/.vim
- vcsh vim commit -m 'Update Vim configuration'
-
-## Add a remote for repository "vim"
-
- vcsh vim remote add origin <remote>
- vcsh vim push origin master:master
- vcsh vim branch --track master origin/master
-
-## Push to remote of repository "vim"
-
- vcsh vim push
-
-## Pull from remote of repository "vim"
-
- vcsh vim pull
-
-
-# mr usage ; will be factored out & rewritten
+# myrepos usage ; will be factored out & rewritten
### Keeping repositories Up-to-Date
After you have made some changes, for which you would normally use `git add`
and `git commit`, use the vcsh wrapper (like above):
- vcsh run foo git add -f bar baz quux
- vcsh run foo git commit
- vcsh run foo git push
-
-By the way, you'll have to use -f/--force flag with git-add because all files
-will be ignored by default. This is to show you only useful output when running
-git-status. A fix for this problem is being worked on.
+ vcsh foo add bar baz quux
+ vcsh foo commit
+ vcsh foo push
-### Using vcsh without mr
+### Using vcsh without myrepos
-vcsh encourages you to use [mr][mr]. It helps you manage a large number of
+vcsh encourages you to use [myrepos][myrepos]. It helps you manage a large number of
repositories by running the necessary vcsh commands for you. You may choose not
-to use mr, in which case you will have to run those commands manually or by
+to use myrepos, in which case you will have to run those commands manually or by
other means.
To interact with a repository, use the regular Git commands, but prepend them
with `vcsh run $repository_name`. For example:
- vcsh run zsh git status
- vcsh run zsh git add -f .zshrc
- vcsh run zsh git commit
+ vcsh zsh status
+ vcsh zsh add .zshrc
+ vcsh zsh commit
-Obviously, without mr keeping repositories up-to-date, it will have to be done
+Obviously, without myrepos keeping repositories up-to-date, it will have to be done
manually. Alternatively, you could try something like this:
for repo in `vcsh list`; do
* Pull requests or issues on [https://github.com/RichiH/vcsh][vcsh]
-[mr]: http://kitenet.net/~joey/code/mr/
+[myrepos]: http://myrepos.branchable.com/
[talks]: http://richardhartmann.de/talks/
[vcsh]: https://github.com/RichiH/vcsh
[vcs-home-list]: http://lists.madduck.net/listinfo/vcs-home
projects / code / vcsh.git / blobdiff