#!/bin/sh
-[ -n "$VCSH_DEBUG" ] && set -x
-
-SELF=$(basename $0)
-
+[ -n "$VCSH_DEBUG" ] && set -vx
[ -z "$XDG_CONFIG_HOME" ] && XDG_CONFIG_HOME="$HOME/.config"
[ -z "$VCSH_BASE" ] && VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
-for check_directory in "$VCSH_BASE" "$HOME/.gitignore.d"
-do
- if [ ! -d "$check_directory" ]; then
- if [ -e "$check_directory" ]; then
- echo "$SELF: error: $check_directory exists but is not a directory" >&2
- exit 2
- else
- echo "$SELF: attempting to create $check_directory"
- mkdir -p "$check_directory" || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
- fi
- fi
-done
-debug() {
- [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $1"
-}
-
-verbose() {
- if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $1"; fi
-}
+SELF=$(basename $0)
-# use <repo> Use this repository
-#
-# exit Exit vcsh mode" >&2
help() {
echo "usage: $SELF <args>
- help Display this help
-
- list List all repos
-
+ clone <remote> \\
+ [<repo>] Clone from an existing repository
+ help Display this help text
+ delete Delete an existing repository
+ enter Enter repository; spawn new $SHELL
+ init <repo> Initialize a new repository
+ list List all repositories
+ rename <repo> \\
+ <newname> Rename repository
run <repo> \\
- <command> Use this repository
+ <command> Use this repository
- init <repo> Initialize a new repository
- clone <remote> \\
- [<repo>] Clone from an existing repository
seed-gitignore \\
- <repo> Seed .gitignore.d/<repo> from git ls-files" >&2
-}
+ <repo> Seed .gitignore.d/<repo> from git ls-files
+ setup Set up repository with recommended settings
-use() {
- verbose "use() begin"
- REPO_NAME="$1"
- GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
+ <repo> <git command> Special command that allows you to run git commands
+ directly without having to type so much ;)" >&2
+}
- if [ ! -d "$GIT_DIR" ]; then
- echo E: no repository found for "$REPO_NAME" >&2
- return 2
- fi
+debug() {
+ [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $@"
+}
- export GIT_DIR
- export GIT_WORK_TREE="$(git config --get core.worktree)"
- export VCSH_DIRECTORY="$REPO_NAME"
- verbose "use() end"
+verbose() {
+ if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $@"; fi
}
-init() {
- verbose "init() begin"
- [ -e "$GIT_DIR" ] &&
- echo "$SELF: fatal: $GIT_DIR exists" &&
- return 21
- export GIT_WORK_TREE="$HOME"
- mkdir -p "$GIT_WORK_TREE"
- cd "$GIT_WORK_TREE" ||
- (echo "$SELF: fatal: could not enter $GIT_WORK_TREE" &&
- exit 20) || exit 20
- cd "$GIT_WORK_TREE"
- git init
- git config core.worktree "$GIT_WORK_TREE"
- git config core.excludesfile ".gitignore.d/$REPO_NAME"
- verbose "init() end"
+fatal() {
+ echo "$SELF: fatal: $1" >&2
+ exit $2
}
-leave() {
- unset GIT_DIR
- unset GIT_WORK_TREE
- unset VCSH_DIRECTORY
+error() {
+ echo "$SELF: error: $1" >&2
}
-if [ "$1" = 'help' ] || [ "$#" -eq 0 ]; then
- help
- [ "$1" = 'help' ]
- exit $?
+info() {
+ echo "$SELF: info: $1"
+}
-elif [ "$1" = 'list' ]; then
- verbose "list begin"
- for i in "$VCSH_BASE"/*.git; do
- echo $(basename "$i" .git)
- done
- verbose "list end"
- exit 0
-
-elif [ "$1" = 'run' ]; then
- verbose "run begin"
- use "$2"
- shift 2
- "$@"
- leave
- verbose "run end"
- exit 0
-
-#elif [ "$1" = 'use' ]; then
-# verbose "use begin"
-# if [ -n "$ZSH_VERSION" ]; then
-# if [ -o NO_IGNORE_EOF ]; then
-# export VCSH_NO_IGNORE_EOF=1
-# setopt IGNORE_EOF
-# fi
-# vcsh_exit() {
-# vcsh exit;
-# zle reset-prompt;
-# }
-# zle -N vcsh_exit
-# bindkey '^d' 'vcsh_exit'
-# fi
-# use $2
-# [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-# verbose "use end"
-# exit 0
-
-elif [ "$1" = 'clone' ]; then
- verbose "clone begin"
- GIT_REMOTE="$2"
- REPO_NAME="$3"
- [ -z "$REPO_NAME" ] && REPO_NAME=$(basename "$GIT_REMOTE" .git)
- export REPO_NAME
- export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
+clone() {
init
-
git remote add origin "$GIT_REMOTE"
git config branch.master.remote origin
git config branch.master.merge refs/heads/master
- git config core.excludesfile ".gitignore.d/$REPO_NAME"
git fetch
for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
[ -e "$object" ] &&
- echo "$SELF: error: $object exists." &&
+ error "'$object' exists." &&
VCSH_CONFLICT=1;
done
[ "$VCSH_CONFLICT" = '1' ] &&
- echo "$SELF: fatal: will stop after fetching and not try to merge!\n" &&
- echo " Once this situation has been resolved, run 'vcsh run <foo> git pull' to finish cloning.\n" &&
- exit 3
+ fatal "will stop after fetching and not try to merge!
+ Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning.\n" 17
git merge origin/master
-# vcsh use $REPO_NAME
- verbose "clone end"
-
-elif [ "$1" = 'init' ]; then
- verbose "init begin"
- [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
- export REPO_NAME="$2"
- export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
- init
-# vcsh use "$REPO_NAME"
- verbose "init end"
-
-#elif [ "$1" = 'exit' ]; then
-# verbose "exit begin"
-# if [ -n "$ZSH_VERSION" ] && [ "$VCSH_NO_IGNORE_EOF" = '1' ]; then
-# unset VCSH_NO_IGNORE_EOF
-# setopt NO_IGNORE_EOF
-# fi
-# leave
-# [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-# verbose "exit end"
-# exit 0
-
-elif [ "$1" = 'seed-gitignore' ]; then
- verbose "seed-gitignore begin"
- [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
- use "$2"
- git config core.excludesfile ".gitignore.d/$REPO_NAME"
+}
+
+delete() {
+ cd "$HOME" || fatal "could not enter '$HOME'" 11
+ use
+ info "This operation WILL DETROY DATA!"
files=$(git ls-files)
+ echo "These files will be deleted:
+
+$files
+
+AGAIN, THIS WILL DELETE YOUR DATA!
+To continue, type \"Yes, do as I say\""
+ read answer
+ [ "x$answer" = "xYes, do as I say" ] || exit 16
+ for file in $files; do
+ rm -f $file || info "could not delete '$file', continuing with deletion"
+ done
+ rmdir "$GIT_DIR" || error "could not delete '$GIT_DIR'"
+}
+
+enter() {
+ use
+ $SHELL
+}
+
+git_dir_exists() {
+ [ -d "$GIT_DIR" ] || fatal "no repository found for '$VCSH_REPO_NAME'" 12
+}
+
+init() {
+ [ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
+ export GIT_WORK_TREE="$HOME"
+ mkdir -p "$GIT_WORK_TREE" || fatal "could not create '$GIT_WORK_TREE'" 50
+ cd "$GIT_WORK_TREE" || fatal "could not enter '$GIT_WORK_TREE'" 11
+ git init
+ setup
+}
+
+list() {
+ for i in "$VCSH_BASE"/*.git; do
+ echo $(basename "$i" .git)
+ done
+}
+
+#get_files() {
+# return $(git ls-files)
+#}
+#
+#list_tracked_all() {
+# use
+# for repo in $(list); do
+# files="$files $(get_files $repo)"
+# done
+# echo $files | sort -u
+#}
+
+rename() {
+ git_dir_exists
+ [ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
+ mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
+
+}
+
+run() {
+ use
+ $VCSH_EXTERNAL_COMMAND
+}
+
+seed_gitignore() {
+ use
+ cd "$HOME" || fatal "could not enter '$HOME'" 11
gitignores=$(for file in $(git ls-files); do
while true; do
echo $file; new="${file%/*}"
[ "$file" = "$new" ] && break
file="$new"
done;
- done | sort -u | sed 's/^/!/')
- [ -e .gitignore.d/$2 ] &&
- echo "$SELF: .gitignore.d/$2 exists, moving it to .gitignore.d/$2.bak" &&
- mv -f .gitignore.d/$2 .gitignore.d/$2.bak
- echo '*' > .gitignore.d/$2
+ done | sort -u)
+ tempfile=$(mktemp) || fatal "could not create tempfile" 51
+ echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
for gitignore in $gitignores; do
- echo $gitignore >> .gitignore.d/$2
+ echo "$gitignore" | sed 's/^/!/' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
+ [ -d "$gitignore" ] && { echo "$gitignore/*" | sed 's/^/!/' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
done
+ if diff -N "$tempfile" "$HOME/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
+ rm -f "$tempfile" || error "could not delete '$tempfile'"
+ exit
+ fi
+ if [ -e "$HOME/.gitignore.d/$VCSH_REPO_NAME" ]; then
+ info "'$HOME/.gitignore.d/$VCSH_REPO_NAME' differs from new data, moving it to '$HOME/.gitignore.d/$VCSH_REPO_NAME.bak'"
+ mv -f "$HOME/.gitignore.d/$VCSH_REPO_NAME" "$HOME/.gitignore.d/$VCSH_REPO_NAME.bak" ||
+ fatal "could not move '$HOME/.gitignore.d/$VCSH_REPO_NAME' to '$HOME/.gitignore.d/$VCSH_REPO_NAME.bak'" 53
+ fi
+ mv -f "$tempfile" "$HOME/.gitignore.d/$VCSH_REPO_NAME" ||
+ fatal "could not move '$tempfile' to '$HOME/.gitignore.d/$VCSH_REPO_NAME'" 53
+}
+
+setup() {
+ use
+ git config core.worktree "$GIT_WORK_TREE"
+ git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
+ git config vcsh.vcsh 'true'
+ [ -e "$HOME/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$HOME/.gitignore.d/$VCSH_REPO_NAME"
+}
+use() {
+ git_dir_exists
+ export GIT_WORK_TREE="$(git config --get core.worktree)"
+ export VCSH_DIRECTORY="$VCSH_REPO_NAME"
+}
+
+if [ "$1" = 'clone' ]; then
+ [ -z $2 ] && fatal "$1: please specify a remote" 1
+ export VCSH_COMMAND="$1"
+ GIT_REMOTE="$2"
+ [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "$GIT_REMOTE" .git)
+ export VCSH_REPO_NAME
+ export GIT_DIR="$VCSH_BASE/$VCSH_REPO_NAME.git"
+elif [ "$1" = 'delete' ] ||
+ [ "$1" = 'enter' ] ||
+ [ "$1" = 'init' ] ||
+ [ "$1" = 'list-tracked-all' ] ||
+ [ "$1" = 'rename' ] ||
+ [ "$1" = 'run' ] ||
+ [ "$1" = 'seed-gitignore' ] ||
+ [ "$1" = 'setup' ]; then
+ [ -z $2 ] && fatal "$1: please specify repository to work on" 1
+ [ "$1" = 'rename' -a -z "$3" ] && fatal "$1: please specify a target name" 1
+ [ "$1" = 'run' -a -z "$3" ] && fatal "$1: please specify a command" 1
+ export VCSH_COMMAND="$1"
+ export VCSH_REPO_NAME="$2"
+ export GIT_DIR="$VCSH_BASE/$VCSH_REPO_NAME.git"
+ [ "$VCSH_COMMAND" = 'rename' ] && export GIT_DIR_NEW="$VCSH_BASE/$3.git"
+ [ "$VCSH_COMMAND" = 'run' ] && shift 2 && export VCSH_EXTERNAL_COMMAND="$*"
+ [ "$VCSH_COMMAND" = 'seed-gitignore' ]
+elif [ "$1" = 'list' ]; then
+ export VCSH_COMMAND="$1"
+elif [ -n "$1" ]; then
+ export VCSH_COMMAND=run
+ export VCSH_REPO_NAME="$1"
+ export GIT_DIR="$VCSH_BASE/$VCSH_REPO_NAME.git"
+ [ -d $GIT_DIR ] || { help; exit 1; }
+ shift 1
+ export VCSH_EXTERNAL_COMMAND="git $*"
else
- verbose "defaulting to calling help()"
- help
- exit 3
+ # $1 is empty, or 'help'
+ help && exit
+fi
+# Did we receive a directory instead of a name?
+# Mangle the input to fit normal operation.
+if echo $VCSH_REPO_NAME | grep -q '/'; then
+ export GIT_DIR=$VCSH_REPO_NAME
+ export VCSH_REPO_NAME=$(basename $VCSH_REPO_NAME .git)
fi
+
+for check_directory in "$VCSH_BASE" "$HOME/.gitignore.d"
+do
+ if [ ! -d "$check_directory" ]; then
+ if [ -e "$check_directory" ]; then
+ fatal "'$check_directory' exists but is not a directory" 13
+ else
+ info "attempting to create '$check_directory'"
+ mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
+ fi
+ fi
+done
+
+verbose "$VCSH_COMMAND begin"
+export VCSH_COMMAND=$(echo $VCSH_COMMAND | sed 's/-/_/g')
+$VCSH_COMMAND
+verbose "$VCSH_COMMAND end, exiting"
projects / code / vcsh.git / blobdiff