]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

Introduce seed-gitignore to, well, seed gitignore..
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index 62310a7293ab5485839cccf1162d39b9acf184ff..18288805d4e7c94b99d1bee21d095556d75d034e 100755 (executable)
--- a/vcsh
+++ b/vcsh
@@ -1,30 +1,53 @@
 #!/bin/sh
 
-#set -x
+[ -n "$VCSH_DEBUG" ] && set -x
 
 SELF=$(basename $0)
-[ -z $XDG_CONFIG_HOME ] && XDG_CONFIG_HOME="$HOME/.config"
-VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
 
+[ -z "$XDG_CONFIG_HOME" ] && XDG_CONFIG_HOME="$HOME/.config"
+[ -z "$VCSH_BASE" ]       && VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
+for check_directory in "$VCSH_BASE"
+do
+       if [ ! -d "$check_directory" ]; then
+               if [ -e "$check_directory" ]; then
+                       echo "$SELF: error: $check_directory exists but is not a directory" >&2
+                       exit 2
+               else
+                       mkdir -p "$check_directory" || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
+               fi
+       fi
+done
+
+debug() {
+       [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $1"
+}
+
+verbose() {
+       if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $1"; fi
+}
+
+#   use <repo>     Use this repository
+#
+#   exit              Exit vcsh mode" >&2
 help() {
        echo "usage: $SELF <args>
 
-   help           Display this help
+   help              Display this help
 
-   list           List all repos
+   list              List all repos
 
-   use <repo>     Use this repository
-   run <repo>
-       <command>  Use this repository
+   run <repo> \\
+       <command>     Use this repository
 
-   init           Initialize a new repository
-   clone <remote>
-         [<repo>] Clone from an existing repository
-
-   exit           Exit vcsh mode" >&2
+   init <repo>       Initialize a new repository
+   clone <remote> \\
+         [<repo>]    Clone from an existing repository
+   seed-gitignore \\
+   <repo>            Seed .gitignore.d/<repo> from git ls-files" >&2
 }
 
 use() {
+       verbose "use() begin"
        REPO_NAME="$1"
        GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
 
@@ -36,20 +59,23 @@ use() {
        export GIT_DIR
        export GIT_WORK_TREE="$(git config --get core.worktree)"
        export VCSH_DIRECTORY="$REPO_NAME"
+       verbose "use() end"
 }
 
 init() {
-       [[ -e $GIT_DIR ]] &&
+       verbose "init() begin"
+       [ -e "$GIT_DIR" ] &&
                echo "$SELF: fatal: $GIT_DIR exists" &&
                return 21
        export GIT_WORK_TREE="$HOME"
-       mkdir -p $GIT_WORK_TREE
-       cd $GIT_WORK_TREE ||
+       mkdir -p "$GIT_WORK_TREE"
+       cd "$GIT_WORK_TREE" ||
                (echo "$SELF: fatal: could not enter $GIT_WORK_TREE" &&
                 exit 20) || exit 20
-       cd $GIT_WORK_TREE
+       cd "$GIT_WORK_TREE"
        git init
-       git config core.worktree $GIT_WORK_TREE
+       git config core.worktree "$GIT_WORK_TREE"
+       verbose "init() end"
 }
 
 leave() {
@@ -58,77 +84,117 @@ leave() {
        unset VCSH_DIRECTORY
 }
 
-if [ "$1" = 'help' ] || [ $# -eq 0 ]; then
+if [ "$1" = 'help' ] || [ "$#" -eq 0 ]; then
        help
        [ "$1" = 'help' ]
-       return $?
+       exit $?
 
 elif [ "$1" = 'list' ]; then
-       for i in $VCSH_BASE/*.git; do
-               echo $(basename $i .git)
+       verbose "list begin"
+       for i in "$VCSH_BASE"/*.git; do
+               echo $(basename "$i" .git)
        done
-       return 0
+       verbose "list end"
+       exit 0
 
 elif [ "$1" = 'run' ]; then
-       use $2
+       verbose "run begin"
+       use "$2"
        shift 2
        "$@"
        leave
-       return 0
-
-elif [ "$1" = 'use' ]; then
-       if [[ -o NO_IGNORE_EOF ]]; then
-               export VCSH_NO_IGNORE_EOF=1
-               setopt IGNORE_EOF
-               vcsh_exit() {vcsh exit; zle reset-prompt;}
-               zle -N vcsh_exit
-               bindkey '^d' 'vcsh_exit'
-       fi
-       use $2
-       buildPS1
-       return 0
+       verbose "run end"
+       exit 0
+
+#elif [ "$1" = 'use' ]; then
+#      verbose "use begin"
+#      if [ -n "$ZSH_VERSION" ]; then
+#              if [ -o NO_IGNORE_EOF ]; then
+#                      export VCSH_NO_IGNORE_EOF=1
+#                      setopt IGNORE_EOF
+#              fi
+#              vcsh_exit() {
+#                      vcsh exit;
+#                      zle reset-prompt;
+#              }
+#              zle -N vcsh_exit
+#              bindkey '^d' 'vcsh_exit'
+#      fi
+#      use $2
+#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
+#      verbose "use end"
+#      exit 0
 
 elif [ "$1" = 'clone' ]; then
+       verbose "clone begin"
        GIT_REMOTE="$2"
        REPO_NAME="$3"
-       [[ -z $REPO_NAME ]] && REPO_NAME=$(basename $GIT_REMOTE .git)
+       [ -z "$REPO_NAME" ] && REPO_NAME=$(basename "$GIT_REMOTE" .git)
        export REPO_NAME
        export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
        init
 
-       git remote add origin $GIT_REMOTE
+       git remote add origin "$GIT_REMOTE"
        git config branch.master.remote origin
        git config branch.master.merge  refs/heads/master
        git fetch
-       for i in $(git ls-tree -r origin/master | awk '{print $4}'); do
-       [[ -e $i ]] &&
-               echo "$SELF: error: $i exists." &&
-               CONFLICT=1;
+       for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
+               [ -e "$object" ] &&
+                       echo "$SELF: error: $object exists." &&
+                       VCSH_CONFLICT=1;
        done
-       [[ -n $CONFLICT ]] &&
+       [ "$VCSH_CONFLICT" = '1' ] &&
                echo "$SELF: fatal: will stop after fetching and not try to merge!\n" &&
+               echo "  Once this situation has been resolved, run 'vcsh run <foo> git pull' to finish cloning.\n" &&
                exit 3
        git merge origin/master
-       vcsh use $REPO_NAME
+#      vcsh use $REPO_NAME
+       verbose "clone end"
 
 elif [ "$1" = 'init' ]; then
+       verbose "init begin"
+       [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
        export REPO_NAME="$2"
        export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
        init
-       vcsh use $REPO_NAME
-
-elif [ "$1" = 'exit' ]; then
-       if [[ $VCSH_NO_IGNORE_EOF -gt 0 ]]; then
-               unset VCSH_NO_IGNORE_EOF
-               setopt NO_IGNORE_EOF
-       fi
-       leave
-       buildPS1
-       return 0
+#      vcsh use "$REPO_NAME"
+       verbose "init end"
+
+#elif [ "$1" = 'exit' ]; then
+#      verbose "exit begin"
+#      if [ -n "$ZSH_VERSION" ] && [ "$VCSH_NO_IGNORE_EOF" = '1' ]; then
+#              unset VCSH_NO_IGNORE_EOF
+#              setopt NO_IGNORE_EOF
+#      fi
+#      leave
+#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
+#      verbose "exit end"
+#      exit 0
+
+elif [ "$1" = 'seed-gitignore' ]; then
+       verbose "seed-gitignore begin"
+       [ -z $2 ] && help && echo && echo "$SELF $1: please specify repository to work on" && return 0
+       use "$2"
+       files=$(git ls-files)
+       gitignores=$(for file in $(git ls-files); do
+               while true; do
+                       echo $file; new="${file%/*}"
+                       [ "$file" = "$new" ] && break
+                       file="$new"
+               done;
+       done | sort -u | sed 's/^/!/')
+       [ -e .gitignore.d/$2 ] &&
+       echo "$SELF: .gitignore.d/$2 exists, moving it to .gitignore.d/$2.bak" &&
+       mv -f .gitignore.d/$2 .gitignore.d/$2.bak
+       echo '*' > .gitignore.d/$2
+       for gitignore in $gitignores; do
+               echo $gitignore >> .gitignore.d/$2
+       done
 
 else
+       verbose "defaulting to calling help()"
        help
-       return 3
+       exit 3
 
 fi