# This should always be the first line of code to facilitate debugging
[ -n "$VCSH_DEBUG" ] && set -vx
-basename() {
- # Implemented in shell to avoid spawning another process
- local file
- file="${1##*/}"
- [ -z "$2" ] || file="${file%$2}"
- echo "$file"
-}
+# If '.git-HEAD' is appended to the version, you are seeing an unreleased
+# version of vcsh; the master branch is supposed to be clean at all times
+# so you can most likely just use it nonetheless
+VERSION='1.20131229.git-HEAD'
SELF=$(basename $0)
-VERSION='1.20130909'
fatal() {
echo "$SELF: fatal: $1" >&2
VCSH_DEBUG=1
echo "debug mode on"
echo "$SELF $VERSION"
- elif [ "$1" = '-v' ];then
+ elif [ "$1" = '-v' ]; then
VCSH_VERBOSE=1
echo "verbose mode on"
echo "$SELF $VERSION"
- elif [ "$1" = '-c' ];then
+ elif [ "$1" = '-c' ]; then
VCSH_OPTION_CONFIG=$OPTARG
fi
shift 1
# Read configuration and set defaults if anything's not set
[ -n "$VCSH_DEBUG" ] && set -vx
-[ -z "$XDG_CONFIG_HOME" ] && XDG_CONFIG_HOME="$HOME/.config"
+: ${XDG_CONFIG_HOME:=$HOME/.config}
# Read configuration files if there are any
[ -r "/etc/vcsh/config" ] && . "/etc/vcsh/config"
[ -n "$VCSH_DEBUG" ] && set -vx
# Read defaults
-[ -z "$VCSH_REPO_D" ] && VCSH_REPO_D="$XDG_CONFIG_HOME/vcsh/repo.d"
-[ -z "$VCSH_HOOK_D" ] && VCSH_HOOK_D="$XDG_CONFIG_HOME/vcsh/hooks-enabled"
-[ -z "$VCSH_BASE" ] && VCSH_BASE="$HOME"
-[ -z "$VCSH_GITIGNORE" ] && VCSH_GITIGNORE='exact'
-[ -z "$VCSH_WORKTREE" ] && VCSH_WORKTREE='absolute'
+: ${VCSH_REPO_D:=$XDG_CONFIG_HOME/vcsh/repo.d}
+: ${VCSH_HOOK_D:=$XDG_CONFIG_HOME/vcsh/hooks-enabled}
+: ${VCSH_BASE:=$HOME}
+: ${VCSH_GITIGNORE:=exact}
+: ${VCSH_WORKTREE:=absolute}
if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
exit
fi
git fetch
- for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
+ hook pre-merge
+ git ls-tree -r --name-only origin/master | (while read object; do
[ -e "$object" ] &&
error "'$object' exists." &&
- VCSH_CONFLICT=1;
+ VCSH_CONFLICT=1
done
- [ "$VCSH_CONFLICT" = '1' ] &&
+ [ "$VCSH_CONFLICT" = '1' ]) &&
fatal "will stop after fetching and not try to merge!
- Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning.\n" 17
+ Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning." 17
git merge origin/master
+ hook post-merge
hook post-clone
retire
hook post-clone-retired
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
use
git commit --untracked-files=no --quiet
+ VCSH_COMMAND_RETURN_CODE=$?
echo
done
hook post-commit
[ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
mkdir -p "$VCSH_BASE" || fatal "could not create '$VCSH_BASE'" 50
cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
- git init
+ git init --shared=0600
upgrade
hook post-init
}
pull() {
hook pre-pull
for VCSH_REPO_NAME in $(list); do
- echo -n "$VCSH_REPO_NAME: "
+ printf "$VCSH_REPO_NAME: "
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
use
git pull
+ VCSH_COMMAND_RETURN_CODE=$?
echo
done
hook post-pull
push() {
hook pre-push
for VCSH_REPO_NAME in $(list); do
- echo -n "$VCSH_REPO_NAME: "
+ printf "$VCSH_REPO_NAME: "
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
use
git push
+ VCSH_COMMAND_RETURN_CODE=$?
echo
done
hook post-push
# Now that the repository has been renamed, we need to fix up its configuration
# Overwrite old name..
GIT_DIR="$GIT_DIR_NEW"
- $VCSH_REPO_NAME="$VCSH_REPO_NAME_NEW"
+ VCSH_REPO_NAME="$VCSH_REPO_NAME_NEW"
# ..and clobber all old configuration
upgrade
}
hook pre-run
use
"$@"
+ VCSH_COMMAND_RETURN_CODE=$?
hook post-run
}
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
use
git status --short --untracked-files='no'
+ VCSH_COMMAND_RETURN_CODE=$?
else
for VCSH_REPO_NAME in $(list); do
echo "$VCSH_REPO_NAME:"
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
use
git status --short --untracked-files='no'
+ VCSH_COMMAND_RETURN_CODE=$?
echo
done
fi
file="$new"
done;
done | sort -u)
- tempfile=$(mktemp tmp.XXXXXXXXXX) || fatal "could not create tempfile" 51
+
+ # Contrary to GNU mktemp, mktemp on BSD/OSX requires a template for temp files
+ # Using a template makes GNU mktemp default to $PWD and not #TMPDIR for tempfile location
+ # To make every OS happy, set full path explicitly
+ tempfile=$(mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX") || fatal "could not create tempfile: '${tempfile}'" 51
+
echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
for gitignore in $gitignores; do
echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
}
-if [ "$1" = 'clone' ]; then
- [ -z "$2" ] && fatal "$1: please specify a remote" 1
- export VCSH_COMMAND="$1"
+debug `git version`
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+ fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+export VCSH_COMMAND="$1"
+
+case "$VCSH_COMMAND" in
+ clon|clo|cl) VCSH_COMMAND=clone;;
+ commi|comm|com|co) VCSH_COMMAND=commit;;
+ delet|dele|del|de) VCSH_COMMAND=delete;;
+ ente|ent|en) VCSH_COMMAND=enter;;
+ hel|he) VCSH_COMMAND=help;;
+ ini|in) VCSH_COMMAND=init;;
+ pul) VCSH_COMMAND=pull;;
+ pus) VCSH_COMMAND=push;;
+ renam|rena|ren|re) VCSH_COMMAND=rename;;
+ ru) VCSH_COMMAND=run;;
+ statu|stat|sta|st) VCSH_COMMAND=status;;
+ upgrad|upgra|upgr|up) VCSH_COMMAND=upgrade;;
+ versio|versi|vers|ver|ve) VCSH_COMMAND=version;;
+ which|whi|wh) VCSH_COMMAND=which;;
+ write|writ|wri|wr) VCSH_COMMAND=write-gitignore;;
+esac
+
+if [ "$VCSH_COMMAND" = 'clone' ]; then
+ [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
GIT_REMOTE="$2"
- [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "$GIT_REMOTE" .git)
+ [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+ [ -z "$VCSH_REPO_NAME" ] && fatal "$VCSH_COMMAND: could not determine repository name" 1
export VCSH_REPO_NAME
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
-elif [ "$1" = 'version' ]; then
+elif [ "$VCSH_COMMAND" = 'version' ]; then
echo "$SELF $VERSION"
+ git version
exit
-elif [ "$1" = 'which' ]; then
- [ -z "$2" ] && fatal "$1: please specify a filename" 1
- [ -n "$3" ] && fatal "$1: too many parameters" 1
- export VCSH_COMMAND="$1"
+elif [ "$VCSH_COMMAND" = 'which' ]; then
+ [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a filename" 1
+ [ -n "$3" ] && fatal "$VCSH_COMMAND: too many parameters" 1
export VCSH_COMMAND_PARAMETER="$2"
-elif [ "$1" = 'delete' ] ||
- [ "$1" = 'enter' ] ||
- [ "$1" = 'init' ] ||
- [ "$1" = 'list-tracked-by' ] ||
- [ "$1" = 'rename' ] ||
- [ "$1" = 'run' ] ||
- [ "$1" = 'upgrade' ] ||
- [ "$1" = 'write-gitignore' ]; then
- [ -z $2 ] && fatal "$1: please specify repository to work on" 1
- [ "$1" = 'rename' -a -z "$3" ] && fatal "$1: please specify a target name" 1
- [ "$1" = 'run' -a -z "$3" ] && fatal "$1: please specify a command" 1
- export VCSH_COMMAND="$1"
+elif [ "$VCSH_COMMAND" = 'delete' ] ||
+ [ "$VCSH_COMMAND" = 'enter' ] ||
+ [ "$VCSH_COMMAND" = 'init' ] ||
+ [ "$VCSH_COMMAND" = 'list-tracked-by' ] ||
+ [ "$VCSH_COMMAND" = 'rename' ] ||
+ [ "$VCSH_COMMAND" = 'run' ] ||
+ [ "$VCSH_COMMAND" = 'upgrade' ] ||
+ [ "$VCSH_COMMAND" = 'write-gitignore' ]; then
+ [ -z $2 ] && fatal "$VCSH_COMMAND: please specify repository to work on" 1
+ [ "$VCSH_COMMAND" = 'rename' -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a target name" 1
+ [ "$VCSH_COMMAND" = 'run' -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a command" 1
export VCSH_REPO_NAME="$2"
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
[ "$VCSH_COMMAND" = 'rename' ] && { export VCSH_REPO_NAME_NEW="$3";
export GIT_DIR_NEW="$VCSH_REPO_D/$VCSH_REPO_NAME_NEW.git"; }
[ "$VCSH_COMMAND" = 'run' ] && shift 2
-elif [ "$1" = 'commit' ] ||
- [ "$1" = 'list' ] ||
- [ "$1" = 'list-tracked' ] ||
- [ "$1" = 'pull' ] ||
- [ "$1" = 'push' ]; then
- export VCSH_COMMAND="$1"
-elif [ "$1" = 'status' ]; then
- export VCSH_COMMAND="$1"
+elif [ "$VCSH_COMMAND" = 'commit' ] ||
+ [ "$VCSH_COMMAND" = 'list' ] ||
+ [ "$VCSH_COMMAND" = 'list-tracked' ] ||
+ [ "$VCSH_COMMAND" = 'pull' ] ||
+ [ "$VCSH_COMMAND" = 'push' ]; then
+ :
+elif [ "$VCSH_COMMAND" = 'status' ]; then
export VCSH_REPO_NAME="$2"
elif [ -n "$2" ]; then
export VCSH_COMMAND='run'
[ -d $GIT_DIR ] || { help; exit 1; }
shift 1
set -- "git" "$@"
-elif [ -n "$1" ]; then
+elif [ -n "$VCSH_COMMAND" ]; then
export VCSH_COMMAND='enter'
export VCSH_REPO_NAME="$1"
export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
$VCSH_COMMAND "$@"
hook post-command
verbose "$VCSH_COMMAND end, exiting"
+exit $VCSH_COMMAND_RETURN_CODE
projects / code / vcsh.git / blobdiff