]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

vcsh: Improve clone() error handling
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index c2b6ff474644e75f9a2f3ab3d2435d18d9a065fa..63e726ea588d1d2ca078b75a590e865a17353303 100755 (executable)
--- a/vcsh
+++ b/vcsh
 # If '.git-HEAD' is appended to the version, you are seeing an unreleased
 # version of vcsh; the master branch is supposed to be clean at all times
 # so you can most likely just use it nonetheless
-VERSION='1.20141009'
+VERSION='1.20141025'
 SELF=$(basename $0)
 
 fatal() {
        echo "$SELF: fatal: $1" >&2
-       [ -z $2] && exit 1
+       [ -z $2 ] && exit 1
        exit $2
 }
 
@@ -100,7 +100,8 @@ help() {
    -v                   Enable verbose mode
 
    commands:
-   clone <remote> \\
+   clone [-b <branch>] \\
+         <remote> \\
          [<repo>]       Clone from an existing repository
    commit               Commit in all repositories
    delete <repo>        Delete an existing repository
@@ -108,9 +109,8 @@ help() {
    help                 Display this help text
    init <repo>          Initialize a new repository
    list                 List all repositories
-   list-tracked         List all files tracked by vcsh
-   list-tracked-by \\
-        <repo>          List files tracked by a repository
+   list-tracked \\
+        [<repo>]        List all files tracked all or one repositories
    list-untracked \\
         [<-r>] [<repo>] List all files not tracked by all or one repositories
    pull                 Pull from all vcsh remotes
@@ -150,16 +150,17 @@ clone() {
        hook pre-clone
        init
        git remote add origin "$GIT_REMOTE"
-       git config branch.master.remote origin
-       git config branch.master.merge  refs/heads/master
-       VCSH_CLONE_ERROR=$(git ls-remote origin master 2>&1)
-       if [ -n "$VCSH_CLONE_ERROR" ]; then
-               rm -rf "$GIT_DIR"
-               fatal "$VCSH_CLONE_ERROR" 1
+       git checkout -b "$VCSH_BRANCH" || return $?
+       git config branch."$VCSH_BRANCH".remote origin
+       git config branch."$VCSH_BRANCH".merge  refs/heads/"$VCSH_BRANCH"
+       if [ $(git ls-remote origin "$VCSH_BRANCH" 2> /dev/null | wc -l ) -lt 1 ]; then
+               info "remote is empty, not merging anything.
+  You should add files to your new repository."
+               exit
        fi
-       git fetch
+       git fetch origin "$VCSH_BRANCH"
        hook pre-merge
-       git ls-tree -r --name-only origin/master | (while read object; do
+       git ls-tree -r --name-only origin/"$VCSH_BRANCH" | (while read object; do
                [ -e "$object" ] &&
                        error "'$object' exists." &&
                        VCSH_CONFLICT=1
@@ -167,7 +168,7 @@ clone() {
        [ x"$VCSH_CONFLICT" = x'1' ]) &&
                fatal "will stop after fetching and not try to merge!
   Once this situation has been resolved, run 'vcsh $VCSH_REPO_NAME pull' to finish cloning." 17
-       git merge origin/master
+       git merge origin/"$VCSH_BRANCH"
        hook post-merge
        hook post-clone
        retire
@@ -247,16 +248,22 @@ get_files() {
 }
 
 list_tracked() {
-       for VCSH_REPO_NAME in $(list); do
-               get_files
-       done | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
-           sed 's/[,\&]/\\&/g')," | sort -u
+       VCSH_REPO_NAME=$2; export VCSH_REPO_NAME
+       if [ -n "$VCSH_REPO_NAME" ]; then
+               get_files | list_tracked_helper
+       else
+               for VCSH_REPO_NAME in $(list); do
+                       get_files
+               done | list_tracked_helper
+       fi
+}
+
+list_tracked_helper() {
+       sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | sed 's/[,\&]/\\&/g')," | sort -u
 }
 
 list_tracked_by() {
-       use
-       git ls-files | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
-           sed 's/[,\&]/\\&/g')," | sort -u
+       list_tracked $2
 }
 
 list_untracked() {
@@ -374,6 +381,12 @@ status() {
 status_helper() {
        GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
        use
+       remote_tracking_branch=$(git rev-parse --abbrev-ref --symbolic-full-name @{u} 2> /dev/null) && {
+               commits_behind=$(git log ..${remote_tracking_branch} --oneline | wc -l)
+               commits_ahead=$(git log ${remote_tracking_branch}.. --oneline | wc -l)
+               [ ${commits_behind} -ne 0 ] && echo "Behind $remote_tracking_branch by $commits_behind commits"
+               [ ${commits_ahead} -ne 0 ] && echo "Ahead of $remote_tracking_branch by $commits_ahead commits"
+       }
        git status --short --untracked-files='no'
        VCSH_COMMAND_RETURN_CODE=$?
 }
@@ -486,11 +499,28 @@ case $VCSH_COMMAND in
 esac    
 
 if [ x"$VCSH_COMMAND" = x'clone' ]; then
+       VCSH_BRANCH=
+       if [ "$2" = -b ]; then
+               VCSH_BRANCH=$3
+               shift
+               shift
+       fi
        [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
        GIT_REMOTE="$2"
-       [ -n "$3" ] && VCSH_REPO_NAME=$3 || VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+       [ -n "$VCSH_BRANCH" ] || if [ "$3" = -b ]; then
+               VCSH_BRANCH=$4
+               shift
+               shift
+       fi
+       if [ -n "$3" ]; then
+               VCSH_REPO_NAME=$3
+               [ -z "$VCSH_BRANCH" ] && [ "$4" = -b ] && VCSH_BRANCH=$5
+       else
+               VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+       fi
        [ -z "$VCSH_REPO_NAME" ] && fatal "$VCSH_COMMAND: could not determine repository name" 1
        export VCSH_REPO_NAME
+       [ -n "$VCSH_BRANCH" ] || VCSH_BRANCH=master
        GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
 elif [ "$VCSH_COMMAND" = 'version' ]; then
        echo "$SELF $VERSION"
@@ -568,6 +598,9 @@ check_dir "$VCSH_REPO_D"
 verbose "$VCSH_COMMAND begin"
 VCSH_COMMAND=$(echo "$VCSH_COMMAND" | sed 's/-/_/g'); export VCSH_COMMAND
 
+# Source repo-specific configuration file
+[ -r "$XDG_CONFIG_HOME/vcsh/config.d/$VCSH_REPO_NAME" ] && . "$XDG_CONFIG_HOME/vcsh/config.d/$VCSH_REPO_NAME"
+
 # source overlay functions
 for overlay in "$VCSH_OVERLAY_D/$VCSH_COMMAND"* "$VCSH_OVERLAY_D/$VCSH_REPO_NAME.$VCSH_COMMAND"*; do
        [ -r "$overlay" ] || continue