]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

vcsh: Add git version information on all debug runs
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index 5acd515dc422ab8b0dc0ef2d42611dc7db2f67c2..3cea66646dc3ec60a87881b03ca1d94c4a9605cb 100755 (executable)
--- a/vcsh
+++ b/vcsh
 #!/bin/sh
 
-#set -x
+# This program is licensed under the GNU GPL version 2 or later.
+# (c) Richard "RichiH" Hartmann <richih@debian.org>, 2011-2013
+# For details, see LICENSE. To submit patches, you have to agree to
+# license your code under the GNU GPL version 2 or later.
+
+# While the following is not legally binding, the author would like to
+# explain the choice of GPLv2+ over GPLv3+.
+# The author prefers GPLv3+ over GPLv2+ but feels it's better to maintain
+# full compatibility's with Git. In case Git ever changes its licensing terms,
+# which is admittedly extremely unlikely to the point of being impossible,
+# this software will most likely follow suit.
+
+# This should always be the first line of code to facilitate debugging
+[ -n "$VCSH_DEBUG" ] && set -vx
+
+basename() {
+       # Implemented in shell to avoid spawning another process
+       local file
+       file="${1##*/}"
+       [ -z "$2" ] || file="${file%$2}"
+       echo "$file"
+}
 
 SELF=$(basename $0)
+VERSION='1.20130909'
 
-[ -z $XDG_CONFIG_HOME ] && XDG_CONFIG_HOME="$HOME/.config"
-for check_directory in $XDG_CONFIG_HOME $XDG_CONFIG_HOME/vcsh $XDG_CONFIG_HOME/vcsh/repo.d
-do
-       if [ ! -d $check_directory ]; then
-               if [ -e $check_directory ]; then
-                       echo "$SELF: error: $check_directory exists but is not a directory" >&2
-                       exit 2
-               else
-                       mkdir $check_directory || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
-               fi
+fatal() {
+       echo "$SELF: fatal: $1" >&2
+       exit $2
+}
+
+# We need to run getops as soon as possible so we catch -d and other
+# options that will modify our behaviour.
+# Commands are handled at the end of this script.
+while getopts "c:dv" flag; do
+       if [ "$1" = '-d' ] || [ "$1" = '--debug' ]; then
+               set -vx
+               VCSH_DEBUG=1
+               echo "debug mode on"
+               echo "$SELF $VERSION"
+       elif [ "$1" = '-v' ];then
+               VCSH_VERBOSE=1
+               echo "verbose mode on"
+               echo "$SELF $VERSION"
+       elif [ "$1" = '-c' ];then
+               VCSH_OPTION_CONFIG=$OPTARG
        fi
+       shift 1
 done
 
-VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
+source_all() {
+       # Source file even if it's in $PWD and does not have any slashes in it
+       case "$1" in
+               */*) . "$1";;
+               *)   . "$PWD/$1";;
+       esac;
+}
+
+
+# Read configuration and set defaults if anything's not set
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+[ -z "$XDG_CONFIG_HOME" ]             && XDG_CONFIG_HOME="$HOME/.config"
+
+# Read configuration files if there are any
+[ -r "/etc/vcsh/config" ]             && . "/etc/vcsh/config"
+[ -r "$XDG_CONFIG_HOME/vcsh/config" ] && . "$XDG_CONFIG_HOME/vcsh/config"
+if [ -n "$VCSH_OPTION_CONFIG" ]; then
+       # Source $VCSH_OPTION_CONFIG if it can be read and is in $PWD of $PATH
+       if [ -r "$VCSH_OPTION_CONFIG" ]; then
+               source_all "$VCSH_OPTION_CONFIG"
+       else
+               fatal "Can not read configuration file '$VCSH_OPTION_CONFIG'" 1
+       fi
+fi
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+
+# Read defaults
+[ -z "$VCSH_REPO_D" ]                 && VCSH_REPO_D="$XDG_CONFIG_HOME/vcsh/repo.d"
+[ -z "$VCSH_HOOK_D" ]                 && VCSH_HOOK_D="$XDG_CONFIG_HOME/vcsh/hooks-enabled"
+[ -z "$VCSH_BASE" ]                   && VCSH_BASE="$HOME"
+[ -z "$VCSH_GITIGNORE" ]              && VCSH_GITIGNORE='exact'
+[ -z "$VCSH_WORKTREE" ]               && VCSH_WORKTREE='absolute'
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ] && [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+       fatal "'\$VCSH_WORKTREE' must equal 'absolute', or 'relative'" 1
+fi
+
 
 help() {
-       echo "usage: $SELF <args>
+       echo "usage: $SELF <options> <command>
 
-   help           Display this help
+   options:
+   -c <file>            Source file
+   -d                   Enable debug mode
+   -v                   Enable verbose mode
 
-   list           List all repos
+   commands:
+   clone <remote> \\
+         [<repo>]       Clone from an existing repository
+   commit               Commit in all repositories
+   delete <repo>        Delete an existing repository
+   enter <repo>         Enter repository; spawn new instance of \$SHELL
+   help                 Display this help text
+   init <repo>          Initialize a new repository
+   list                 List all repositories
+   list-tracked         List all files tracked by vcsh
+   list-tracked-by \\
+        <repo>          List files tracked by a repository
+   pull                 Pull from all vcsh remotes
+   push                 Push to vcsh remotes
+   rename <repo> \\
+          <newname>     Rename repository
+   run <repo> \\
+       <command>        Use this repository
+   status [<repo>]      Show statuses of all/one vcsh repositories
+   upgrade <repo>       Upgrade repository to currently recommended settings
+   version              Print version information
+   which <substring>    Find substring in name of any tracked file
+   write-gitignore \\
+   <repo>               Write .gitignore.d/<repo> via git ls-files
 
-   use <repo>     Use this repository
-   run <repo>
-       <command>  Use this repository
+   <repo> <git command> Shortcut to run git commands directly
+   <repo>               Shortcut to enter repository" >&2
+}
 
-   init           Initialize a new repository
-   clone <remote>
-         [<repo>] Clone from an existing repository
+debug() {
+       [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $@"
+}
 
-   exit           Exit vcsh mode" >&2
+verbose() {
+       if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $@"; fi
 }
 
-use() {
-       REPO_NAME="$1"
-       GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
+error() {
+       echo "$SELF: error: $1" >&2
+}
+
+info() {
+       echo "$SELF: info: $1"
+}
 
-       if [ ! -d "$GIT_DIR" ]; then
-               echo E: no repository found for "$REPO_NAME" >&2
-               return 2
+clone() {
+       hook pre-clone
+       init
+       git remote add origin "$GIT_REMOTE"
+       git config branch.master.remote origin
+       git config branch.master.merge  refs/heads/master
+       if [ $(git ls-remote origin master 2> /dev/null | wc -l ) -lt 1 ]; then
+               info "remote is empty, not merging anything"
+               exit
        fi
+       git fetch
+       for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
+               [ -e "$object" ] &&
+                       error "'$object' exists." &&
+                       VCSH_CONFLICT=1;
+       done
+       [ "$VCSH_CONFLICT" = '1' ] &&
+               fatal "will stop after fetching and not try to merge!
+  Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning.\n" 17
+       git merge origin/master
+       hook post-clone
+       retire
+       hook post-clone-retired
+}
 
-       export GIT_DIR
-       export GIT_WORK_TREE="$(git config --get core.worktree)"
-       export VCSH_DIRECTORY="$REPO_NAME"
+commit() {
+       hook pre-commit
+       for VCSH_REPO_NAME in $(list); do
+               echo "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git commit --untracked-files=no --quiet
+               echo
+       done
+       hook post-commit
+}
+
+delete() {
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       use
+       info "This operation WILL DESTROY DATA!"
+       files=$(git ls-files)
+       echo "These files will be deleted:
+
+$files
+
+AGAIN, THIS WILL DELETE YOUR DATA!
+To continue, type 'Yes, do as I say'"
+       read answer
+       [ "x$answer" = 'xYes, do as I say' ] || exit 16
+       for file in $files; do
+               rm -f $file || info "could not delete '$file', continuing with deletion"
+       done
+       rm -rf "$GIT_DIR" || error "could not delete '$GIT_DIR'"
+}
+
+enter() {
+       hook pre-enter
+       use
+       $SHELL
+       hook post-enter
+}
+
+git_dir_exists() {
+       [ -d "$GIT_DIR" ] || fatal "no repository found for '$VCSH_REPO_NAME'" 12
+}
+
+hook() {
+       for hook in $VCSH_HOOK_D/$1* $VCSH_HOOK_D/$VCSH_REPO_NAME.$1*; do
+               [ -x "$hook" ] || continue
+               verbose "executing '$hook'"
+               "$hook"
+       done
 }
 
 init() {
-       [[ -e $GIT_DIR ]] &&
-               echo "$SELF: fatal: $GIT_DIR exists" &&
-               return 21
-       export GIT_WORK_TREE="$HOME"
-       mkdir -p $GIT_WORK_TREE
-       cd $GIT_WORK_TREE ||
-               (echo "$SELF: fatal: could not enter $GIT_WORK_TREE" &&
-                exit 20) || exit 20
-       cd $GIT_WORK_TREE
+       hook pre-init
+       [ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
+       mkdir -p "$VCSH_BASE" || fatal "could not create '$VCSH_BASE'" 50
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
        git init
-       git config core.worktree $GIT_WORK_TREE
+       upgrade
+       hook post-init
 }
 
-leave() {
-       unset GIT_DIR
-       unset GIT_WORK_TREE
-       unset VCSH_DIRECTORY
+list() {
+       for repo in "$VCSH_REPO_D"/*.git; do
+               [ -d "$repo" ] && [ -r "$repo" ] && echo $(basename "$repo" .git)
+       done
 }
 
-if [ "$1" = 'help' ] || [ $# -eq 0 ]; then
-       help
-       [ "$1" = 'help' ]
-       return $?
+get_files() {
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       git ls-files
+}
+
+list_tracked() {
+       for VCSH_REPO_NAME in $(list); do
+               get_files
+       done | sort -u
+}
 
-elif [ "$1" = 'list' ]; then
-       for i in $VCSH_BASE/*.git; do
-               echo $(basename $i .git)
+list_tracked_by() {
+       use
+       git ls-files | sort -u
+}
+
+pull() {
+       hook pre-pull
+       for VCSH_REPO_NAME in $(list); do
+               echo -n "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git pull
+               echo
        done
-       return 0
+       hook post-pull
+}
 
-elif [ "$1" = 'run' ]; then
-       use $2
-       shift 2
+push() {
+       hook pre-push
+       for VCSH_REPO_NAME in $(list); do
+               echo -n "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git push
+               echo
+       done
+       hook post-push
+}
+
+retire() {
+       unset VCSH_DIRECTORY
+}
+
+rename() {
+       git_dir_exists
+       [ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
+       mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
+
+       # Now that the repository has been renamed, we need to fix up its configuration
+       # Overwrite old name..
+       GIT_DIR="$GIT_DIR_NEW"
+       $VCSH_REPO_NAME="$VCSH_REPO_NAME_NEW"
+       # ..and clobber all old configuration
+       upgrade
+}
+
+run() {
+       hook pre-run
+       use
        "$@"
-       leave
-       return 0
-
-elif [ "$1" = 'use' ]; then
-       if [[ -o NO_IGNORE_EOF ]]; then
-               export VCSH_NO_IGNORE_EOF=1
-               setopt IGNORE_EOF
-               vcsh_exit() {vcsh exit; zle reset-prompt;}
-               zle -N vcsh_exit
-               bindkey '^d' 'vcsh_exit'
+       hook post-run
+}
+
+status() {
+       if [ ! "x$VCSH_REPO_NAME" = "x" ]; then
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git status --short --untracked-files='no'
+       else
+               for VCSH_REPO_NAME in $(list); do
+                       echo "$VCSH_REPO_NAME:"
+                       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+                       use
+                       git status --short --untracked-files='no'
+                       echo
+               done
        fi
-       use $2
-       buildPS1
-       return 0
+}
 
-elif [ "$1" = 'clone' ]; then
-       GIT_REMOTE="$2"
-       REPO_NAME="$3"
-       [[ -z $REPO_NAME ]] && REPO_NAME=$(basename $GIT_REMOTE .git)
-       export REPO_NAME
-       export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-       init
+upgrade() {
+       hook pre-upgrade
+       # fake-bare repositories are not bare, actually. Set this to false
+       # because otherwise Git complains "fatal: core.bare and core.worktree
+       # do not make sense"
+       git config core.bare false
+       # core.worktree may be absolute or relative to $GIT_DIR, depending on
+       # user preference
+       if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ]; then
+               git config core.worktree $(cd $GIT_DIR && GIT_WORK_TREE="$VCSH_BASE" git rev-parse --show-cdup)
+       elif [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+               git config core.worktree "$VCSH_BASE"
+       fi
+       [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
+       git config vcsh.vcsh         'true'
+       use
+       [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME"
+       hook post-upgrade
+}
 
-       git remote add origin $GIT_REMOTE
-       git config branch.master.remote origin
-       git config branch.master.merge  refs/heads/master
-       git fetch
-       for i in $(git ls-tree -r origin/master | awk '{print $4}'); do
-       [[ -e $i ]] &&
-               echo "$SELF: error: $i exists." &&
-               CONFLICT=1;
-       done
-       [[ -n $CONFLICT ]] &&
-               echo "$SELF: fatal: will stop after fetching and not try to merge!\n" &&
-               exit 3
-       git merge origin/master
-       vcsh use $REPO_NAME
+use() {
+       git_dir_exists
+       export VCSH_DIRECTORY="$VCSH_REPO_NAME"
+}
 
-elif [ "$1" = 'init' ]; then
-       export REPO_NAME="$2"
-       export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-       init
-       vcsh use $REPO_NAME
+which() {
+       for VCSH_REPO_NAME in $(list); do
+               for VCSH_FILE in $(get_files); do
+                       echo $VCSH_FILE | grep -q "$VCSH_COMMAND_PARAMETER" && echo "$VCSH_REPO_NAME: $VCSH_FILE"
+               done
+       done | sort -u
+}
 
-elif [ "$1" = 'exit' ]; then
-       if [[ $VCSH_NO_IGNORE_EOF -gt 0 ]]; then
-               unset VCSH_NO_IGNORE_EOF
-               setopt NO_IGNORE_EOF
+write_gitignore() {
+       # Don't do anything if the user does not want to write gitignore
+       if [ "x$VCSH_GITIGNORE" = 'xnone' ]; then
+               info "Not writing gitignore as '\$VCSH_GITIGNORE' is set to 'none'"
+               exit
        fi
-       leave
-       buildPS1
-       return 0
 
+       use
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       gitignores=$(for file in $(git ls-files); do
+               while true; do
+                       echo $file; new="${file%/*}"
+                       [ "$file" = "$new" ] && break
+                       file="$new"
+               done;
+       done | sort -u)
+
+       # Contrary to GNU mktemp, mktemp on BSD/OSX requires a template for temp files
+       # Use the template GNU mktemo defaults to
+       tempfile=$(mktemp tmp.XXXXXXXXXX) || fatal "could not create tempfile" 51
+
+       echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
+       for gitignore in $gitignores; do
+               echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
+               if [ "x$VCSH_GITIGNORE" = 'xrecursive' ] && [ -d "$gitignore" ]; then
+                       { echo "$gitignore/*" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
+               fi
+       done
+       if diff -N "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
+               rm -f "$tempfile" || error "could not delete '$tempfile'"
+               exit
+       fi
+       if [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ]; then
+               info "'$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' differs from new data, moving it to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'"
+               mv -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak" ||
+                       fatal "could not move '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'" 53
+       fi
+       mv -f "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ||
+               fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
+}
+
+debug `git version`
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+export VCSH_COMMAND="$1"
+
+[ "$VCSH_COMMAND" = 'clon' ]   || [ "$VCSH_COMMAND" = 'clo' ]   || [ "$VCSH_COMMAND" = 'cl' ]                                                                && VCSH_COMMAND='clone'
+[ "$VCSH_COMMAND" = 'commi' ]  || [ "$VCSH_COMMAND" = 'comm' ]  || [ "$VCSH_COMMAND" = 'com' ]  || [ "$VCSH_COMMAND" = 'co' ]                                && VCSH_COMMAND='commit'
+[ "$VCSH_COMMAND" = 'delet' ]  || [ "$VCSH_COMMAND" = 'dele' ]  || [ "$VCSH_COMMAND" = 'del' ]  || [ "$VCSH_COMMAND" = 'de' ]                                && VCSH_COMMAND='delete'
+[ "$VCSH_COMMAND" = 'ente' ]   || [ "$VCSH_COMMAND" = 'ent' ]   || [ "$VCSH_COMMAND" = 'en' ]                                                                && VCSH_COMMAND='enter'
+[ "$VCSH_COMMAND" = 'hel' ]    || [ "$VCSH_COMMAND" = 'he' ]                                                                                                 && VCSH_COMMAND='help'
+[ "$VCSH_COMMAND" = 'ini' ]    || [ "$VCSH_COMMAND" = 'in' ]                                                                                                 && VCSH_COMMAND='init'
+[ "$VCSH_COMMAND" = 'pul' ]                                                                                                                                  && VCSH_COMMAND='pull'
+[ "$VCSH_COMMAND" = 'pus' ]                                                                                                                                  && VCSH_COMMAND='push'
+[ "$VCSH_COMMAND" = 'renam' ]  || [ "$VCSH_COMMAND" = 'rena' ]  || [ "$VCSH_COMMAND" = 'ren' ]  || [ "$VCSH_COMMAND" = 're' ]                                && VCSH_COMMAND='rename'
+[ "$VCSH_COMMAND" = 'ru' ]                                                                                                                                   && VCSH_COMMAND='run'
+[ "$VCSH_COMMAND" = 'statu' ]  || [ "$VCSH_COMMAND" = 'stat' ]  || [ "$VCSH_COMMAND" = 'sta' ]  || [ "$VCSH_COMMAND" = 'st' ]                                && VCSH_COMMAND='status'
+[ "$VCSH_COMMAND" = 'upgrad' ] || [ "$VCSH_COMMAND" = 'upgra' ] || [ "$VCSH_COMMAND" = 'upgr' ] || [ "$VCSH_COMMAND" = 'upg' ]                               && VCSH_COMMAND='upgrade'
+[ "$VCSH_COMMAND" = 'versio' ] || [ "$VCSH_COMMAND" = 'versi' ] || [ "$VCSH_COMMAND" = 'vers' ] || [ "$VCSH_COMMAND" = 'ver' ] || [ "$VCSH_COMMAND" = 've' ] && VCSH_COMMAND='version'
+[ "$VCSH_COMMAND" = 'whic' ]   || [ "$VCSH_COMMAND" = 'whi' ]   || [ "$VCSH_COMMAND" = 'wh' ]                                                                && VCSH_COMMAND='which'
+[ "$VCSH_COMMAND" = 'write' ]  || [ "$VCSH_COMMAND" = 'writ' ]  || [ "$VCSH_COMMAND" = 'wri' ]  || [ "$VCSH_COMMAND" = 'wr' ]                                && VCSH_COMMAND='write-gitignore'
+
+
+if [ "$VCSH_COMMAND" = 'clone' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
+       GIT_REMOTE="$2"
+       [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "$GIT_REMOTE" .git)
+       export VCSH_REPO_NAME
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+elif [ "$VCSH_COMMAND" = 'version' ]; then
+       echo "$SELF $VERSION"
+       git version
+       exit
+elif [ "$VCSH_COMMAND" = 'which' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a filename" 1
+       [ -n "$3" ] && fatal "$VCSH_COMMAND: too many parameters" 1
+       export VCSH_COMMAND_PARAMETER="$2"
+elif [ "$VCSH_COMMAND" = 'delete' ]           ||
+     [ "$VCSH_COMMAND" = 'enter' ]            ||
+     [ "$VCSH_COMMAND" = 'init' ]             ||
+     [ "$VCSH_COMMAND" = 'list-tracked-by' ]  ||
+     [ "$VCSH_COMMAND" = 'rename' ]           ||
+     [ "$VCSH_COMMAND" = 'run' ]              ||
+     [ "$VCSH_COMMAND" = 'upgrade' ]          ||
+     [ "$VCSH_COMMAND" = 'write-gitignore' ]; then
+       [ -z $2 ]                                 && fatal "$VCSH_COMMAND: please specify repository to work on" 1
+       [ "$VCSH_COMMAND" = 'rename' -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a target name" 1
+       [ "$VCSH_COMMAND" = 'run'    -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a command" 1
+       export VCSH_REPO_NAME="$2"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ "$VCSH_COMMAND" = 'rename' ] && { export VCSH_REPO_NAME_NEW="$3";
+                                           export GIT_DIR_NEW="$VCSH_REPO_D/$VCSH_REPO_NAME_NEW.git"; }
+       [ "$VCSH_COMMAND" = 'run' ]    && shift 2
+elif [ "$VCSH_COMMAND" = 'commit' ] ||
+     [ "$VCSH_COMMAND" = 'list' ] ||
+     [ "$VCSH_COMMAND" = 'list-tracked' ] ||
+     [ "$VCSH_COMMAND" = 'pull' ] ||
+     [ "$VCSH_COMMAND" = 'push' ]; then
+       :
+elif [ "$VCSH_COMMAND" = 'status' ]; then
+       export VCSH_REPO_NAME="$2"
+elif [ -n "$2" ]; then
+       export VCSH_COMMAND='run'
+       export VCSH_REPO_NAME="$1"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ -d $GIT_DIR ] || { help; exit 1; }
+       shift 1
+       set -- "git" "$@"
+elif [ -n "$VCSH_COMMAND" ]; then
+       export VCSH_COMMAND='enter'
+       export VCSH_REPO_NAME="$1"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ -d $GIT_DIR ] || { help; exit 1; }
 else
-       help
-       return 3
+       # $1 is empty, or 'help'
+       help && exit
+fi
 
+# Did we receive a directory instead of a name?
+# Mangle the input to fit normal operation.
+if echo $VCSH_REPO_NAME | grep -q '/'; then
+       export GIT_DIR=$VCSH_REPO_NAME
+       export VCSH_REPO_NAME=$(basename "$VCSH_REPO_NAME" .git)
 fi
 
+check_dir() {
+       check_directory="$1"
+       if [ ! -d "$check_directory" ]; then
+               if [ -e "$check_directory" ]; then
+                       fatal "'$check_directory' exists but is not a directory" 13
+               else
+                       verbose "attempting to create '$check_directory'"
+                       mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
+               fi
+       fi
+}
+
+check_dir "$VCSH_REPO_D"
+[ ! "x$VCSH_GITIGNORE" = 'xnone' ] && check_dir "$VCSH_BASE/.gitignore.d"
+
+verbose "$VCSH_COMMAND begin"
+export VCSH_COMMAND=$(echo $VCSH_COMMAND | sed 's/-/_/g')
+hook pre-command
+$VCSH_COMMAND "$@"
+hook post-command
+verbose "$VCSH_COMMAND end, exiting"